LSYBB3KP-FP [HONEYWELL]
Snap Acting/Limit Switch, SPDT, Momentary, 240VDC, Screw Terminal, Top Rotary Actuator, Panel Mount;型号: | LSYBB3KP-FP |
厂家: | Honeywell |
描述: | Snap Acting/Limit Switch, SPDT, Momentary, 240VDC, Screw Terminal, Top Rotary Actuator, Panel Mount 开关 光电二极管 |
文件: | 总43页 (文件大小:8338K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MICRO SWITCH™
Heavy-Duty Limit Switches
HDLS Series
Datasheet
MICRO SWITCH™ HDLS Series
Heavy-Duty Limit Switches
Honeywell Sensing and Control’s MICRO SWITCH™ heavy-duty limit switches’ modular construction allows for a wide
variety of actuator styles, operating heads, and electrical circuitry options. The plug-in versions greatly reduce downtime on
production lines with high actuation rates as replacement of the switch is accomplished in seconds. The base receptacle
contains all the wiring and conduit connection while the switching component with operating head easily assembles to the
base and is attached with two screws.
What makes our switches better?
Industry-leading breadth-of-product offering: HDLS standard,
HDLS harsh-duty epoxy sealed, or the HDLS stainless steel
NEMA 1, 3, 4, 4X, 6, 6P, 12, 13 and IP65/66/67 environmental
sealing for demanding applications
UL, CSA, CE, and CCC approvals for global use
Sintered bronze bearing on 303 stainless steel operating shaft
for enhanced mechanical life (50 million actuation cycles) and
operational reliability
All-metal drive train for consistent operating characteristics,
even at high temperature. Lasts longer (without need for
frequent adjustment) than drive trains with plastic parts
Exclusive teller tab ensures proper torque. When it cannot be
moved, the lever is tight enough to prevent slippage
RELIABILITY • DURABILITY
MODULAR • GLOBAL
sensing.honeywell.com
2
SEALED TO NEMA 1, 3, 4, 4X, 6, 6P, 12, 13; IP 65/66/67
Features
and Benefits
MICRO SWITCH™ HDLS limit switch NEMA/IP sealing features twin shaft
seals for an extra measure of protection. They are ideal for many applications
with demanding indoor and/or outdoor environments, where they may be
subjected to shock or vibration from equipment, temperature extremes, dust,
splashing water, coolant, and/or hose-directed water.
Works the first time – every time
WITHSTANDS MANY TOUGH ENVIRONMENTS
Rugged, corrosion-resistant zinc head and body are phosphate treated and
epoxy coated for indoor and outdoor applications. Diaphragm seal between
head and body provides an extra measure of protection. Functions with exposure
to severe temperatures, dust, dirt, grime, and caustic chemicals.
Rapid customization and design-in time
USED GLOBALLY
Multiple connectivity options for international applications, as well as global
approvals. Large, existing installation base and channel allows for quick delivery
worldwide. UL, CSA, CE, and CCC approvals.
OPTIONAL SEALS
Fluorosilicone seals available for low temperature applications, and
fluorocarbon seals available for chemically harsh environments and higher
temperature applications.
UNIQUE DESIGN FEATURES
Keyed head design for secure head-to-body retention with the head in any one
of four positions 90° apart. Self-lifting pressure plate terminals saves wiring time.
DESIGN FLEXIBILITY
Wide variety of actuators, switch options, and head styles for design flexibility.
Rotary actuated heads are field adjustable for CW actuation, CCW actuation, or
both to reduce inventory.
EASILY CONTROLS LOW-VOLTAGE DC APPLICATIONS
Limit switches available with a choice of silver or gold-plated contacts to handle
a variety of electrical load requirements.
INTERCHANGEABLE
Plug-in and non plug-in bodies have identical operating characteristics and are
dimensionally interchangeable to reduce complexity. Actuating levers for
single and double pole, plug-in and non plug-in bodies provide same tracking and
minimize inventory.
sensing.honeywell.com
3
Potential Applications
MACHINE TOOLS
Determines part presence, machine slide position/stops, gates and doors
AUTOMOTIVE MACHINE TOOLS
Provides presence sensing on transfer machines, horizontal and vertical boring
machines, stamping and forming equipment and automotive assembly line
equipment
MATERIAL HANDLING
Used to position automated vehicle wash systems, overhead doors, garbage
truck bodies, cranes, intermodal container handlers, gantry cranes, commercial
aircraft boarding bridge
OUTDOOR ELECTROMECHANICAL STRUCTURES
End of travel indicator for equipment with moving components in harsh
environments and remote locations, such as satellite and weather station arrays and
solar energy harvesters
BALERS/COMPACTORS
Used as door interlocks for indoor and outdoor applications
CONVEYORS
Used for alignment/tracking, tensioning, and product/material presence
FOOD AND BEVERAGE
Used for process control, and packaging
POWER PLANTS
Used on conveyors, doors and gates
OFF-ROAD EQUIPMENT
Senses position of large components on wheeled or track equipment, motorized
railroad switch, and rail locomotives
AGRICULTURAL EQUIPMENT
Grain handling and livestock equipment
VALVES
Indicates closed and/or open position
TRANSPORTATION HUBS
Commercial aircraft boarding bridge, commercial aircraft ground support
equipment, intermodal container handlers, gantry cranes, shipboard conveyors,
door/hatch position & valve position, railroad locomotives and rail maintenance
equipment
sensing.honeywell.com
4
MICRO SWITCH™ Heavy-Duty Limit Switches
Figure 1. MICRO SWITCH™ HDLS SERIES FEATURES AND OPTIONS
303 stainless steel operating shaft
on sintered bronze bearing for
enhanced mechanical life and operational reliability.
Field adjustable operating head
(CW and CCW, CW or CCW)
matches switch to the application.
Tracking interchangeability
of actuator levers for single-
and double-pole switches,
plug-in and non-plug-in.
Twin shaft seals for an
extra measure of
protection. Optional
fluorocarbon or
fluorosilicone seals.
Dual bearings deliver
enhanced mechanical life.
Exclusive teller tab ensures
proper torque. When it cannot
be moved, the lever is tight
enough to prevent
slippage.
Boss-and-socket
head design for secure
head-to-body retention.
Superior design of plug-in
terminal between switch body
and receptacle maintains electrical
continuity in harsh conditions
of temperature extremes,
Diaphragm seal
for exta measure
of protection.
equipment vibration, and shock.
Unique, all-metal drive
Self-lifting pressure
plate terminals save
wiring time.
train for consistent operating
characteristics even at high
temperature; lasts longer
(without the need for
frequent adjustment) than
drive trains with plastic parts.
Rugged, corrosion-
resistant zinc head and
body are phosphate
treated and epoxy
coated.
Easily identified
grounding terminal
(inside) for compliance
with regulatory standards.
One piece flat gasket: seals better than gaskets that go around
curves and corners. Does not contact the terminals pins to reduce
possibility of fluid migration.
Front mounting and interchangeability of single- and double-pole switches,
plug-in and non-plug-in with one another and with other switch brands.
Domestic and international
conduit threads.
Each switch has four mounting holes; two “through” holes for front mount, and
two tapped holes in back for rear mount
sensing.honeywell.com
5
HDLS Series
Table 1. Specifications
Characteristic
Parameter
Product type
MICRO SWITCH™ heavy-duty limit switches
Side plunger - adjustable
Side roller plunger
Top plunger - adjustable
Top rotary
Side plunger - pin
Side rotary
Top plunger - pin
Wobble - cable
Wobble - plastic rod
Side plunger maintained - pin
Side rotary maintained
Top roller plunger
Wobble - cat whisker
Wobble - spring wire
Acutators
Circuitry
Wobble - coil spring
1NC 1NO SPDT snap action, double break
2NC 2NO DPDT center neutral, snap action, double break
2NC 2NO DPDT snap action, double break
2NC 2NO DPDT sequential, snap action, double break
10 A thermal
Electrical
Single and double pole: AC15 A600; DC13 R300 (see table on page 8)
Housing material
Zinc die-cast with an electrostatic epoxy coating
0.5 in - 14NPT conduit
PG 13,5 conduit
4-pin mini-style connector
6 ft cable
0.75 in - 14NPT conduit
20 mm conduit
5-pin mini-style connector
Manifold mounting
12 ft cable
4-pin micro-style connector
9-pin mini-style connector
Termination types
Housing type
Sealing
HDLS Plug-in, HDLS Non-Plug-in
IP65/66/67; NEMA 1, 3, 4, 4X, 6, 6P, 12, 13
-12 °C to 121 °C [10 °F to 250 °F];
optional: -40 °C to 121 °C [-40 °F to 250 ’F]
Operating temperature
Agency approvals and stan-
dards
UL, CE, CSA, CCC
UNSPSC code
UNSPSC commodity
Sealed
302119
302119 Switches and controls and relays
Industrial
sensing.honeywell.com
6
MICRO SWITCH™ Heavy-Duty Limit Switches
MICRO SWITCH™ HDLS SERIES NOMENCLATURE
LS
1
A
1A
–
Switch Type
Modification Codes
Wobble Actuator
Heads
L
Body/Basic Switch Codes
5-conductor
STOOW-A cable,
8 ft
9-conductor
STOOW-A cable,
8 ft
HDLS Series
Heavy-Duty
Limit Switch
4-pin
Side rotary,
momentary
Side rotary,
sequential
Plug-in
Single Pole
Wobble,
plastic
Non-plug-in
Double Pole
Plug-in
Double Pole
A
B
C
E
J
PA
XA
PB
7A
A
B
C
D
E
F
mini-style
Top rotary,
momentary
Side rotary,
center neutral
Standard
switch
Standard
switch
Standard
5-pin
Wobble,
wire
4L
1A
2B
2C
2D
2R
2S
2T
2U
6B
6C
6D
7M
M
switch
mini-style
5-conductor
STOW-A cable,
6 ft
5-conductor
STOOW-A cable,
30 ft
Gold
contacts
Top plunger,
plain
Side rotary,
maintained
Wobble,
cable
Sequential
Sequential
4M
1E
1G
1H
5A
8A
9A
7N
N
4-conductor
SJTOW-A cable,
6 ft
Side rotary,
momentary,
low pretravel
Center
neutral
Gold contacts,
manifold mount
Center
neutral
Clockwise
Cat whisker,
5.5 in steel
Top roller
plunger
* 3 or 4 after
the “LS”
indicates
special metric
conduit
threads:
4N
4S
4T
4U
7L
7M
7N
7S
7T
7U
1
2
3
4
5
6
7
8
P
8A
head rotation
Side rotary,
momentary,
low torque
Standard switch
golf contacts
Low
force
120 V neon
indicator
8-pin
Counterclockwise
head rotation
Cat whisker,
7.5 in steel
Side plunger
8B
R
mini-style
plain, momentary
Head assembled
with actuator to
right side
Side rotary,
9-conductor
Sequential,
gold contacts
120 V neon
indicator
Standard switch
golf contacts
Coil spring,
5.5 in
Side plunger
gravity return
extr. low torque
STOOW-A cable,
M 6 ft
S
T
8C
roller, momentary
3 = PG 13,5
4 = 20 mm
Head assembled
with actuator to
left side
Side rotary,
5-conductor
Center neutral,
gold contacts
240 V neon
indicator
Sequential,
gold contacts
Cat whisker,
plastic
Side plunger
momentary,
extr. low torque
STOOW-A cable,
12 ft
8D
P
R
S
X
G
H
J
plain, maintained
Standard
switch,
Head assembled
with actuator to
mounting surface
Side rotary,
Side rotary,
24 V LED
indicator
Center neutral,
gold contacts
9-pin
momentary, low
pretravel & torque
momentary,
U
V
W
mini-style
1/2 in conduit
5° max. pretravel
Standard
switch,
Roller
Sequential,
1/2 in conduit
5-pin
Wobble
stick
Top plunger,
adjustable
Non-plug-in
Single Pole
perpendicular to
mounting surface
micro-style
1/2 in conduit
Indicator light
wired to normally
closed circuit
Side plunger,
momentary,
adjustable
9-conductor
STOOW-A cable,
12 ft
Center neutral,
1/2 in conduit
Sequential,
1/2 in conduit
Cat
whisker
Standard
switch
K
3K
Stnd. switch,
gold contacts,
1/2 in conduit
3-foot mini-style
pigtail,
Roller on side
plunger in
Center neutral,
1/2 in conduit
BB single pole
vertical position
Sequential,
120 V neon
indicator,
4-pin micro-style
with jumper
gold contacts,
1/2 in conduit
NOTE: Not all combinations of model codes
are available. Please contact your local
Honeywell provider for assistance.
6R 1/2 in conduit
DD
Center neutral,
gold contacts,
1/2 in conduit
Stnd. switch,
gold contacts,
6S
1/2 in conduit
Sequential,
gold contacts,
6T
1/2 in conduit
Center neutral,
6U
gold contacts,
1/2 in conduit
sensing.honeywell.com
7
HDLS Series
MICRO SWITCH™ HDLS SERIES ELECTRICAL
RATINGS:
10 A CONTINUOUS CARRY
ASSEMBLY MODIFICATIONS • ROTARY
Momentary action rotary switches can be furnished in other than
the normal assembled conditions. To specify modifications, add the
numbers shown below to the catalog listings. Modification number
suffixes are:
AC VOLTS; PILOT DUTY: AC15, A600/B600
Electrical Circuitry Vac
Rating
Amps at 0.35
Power Factor
Make
Amps at 0.35
Power Factor
Break
1
2
3
4
5
7
Clockwise actuation only
Counterclockwise actuation only
Shaft to right of switch front
Shaft to left of switch front
Shaft to back of switch
A*
AC15,
A600
SPDT
DPDT
120
240
480
600
120
240
480
600
60
30
15
12
30
15
7.5
6
6
3
1.5
1.2
3
Indicator light wired to NC circuit
D
B
AC15,
B600
For example,
1.5
0.75
0.60
Catalog listing LSA1A23 is an LSA1A switch adjusted for counter-
clockwise actuation only. The operating shaft is to the right side of
the switch when viewing it from the front (label side). No lever.
D Gravity return (Model LSS..) and extra-low torque (Model LST..)
Catalog listing LSA8A7 is an LSA8A switch with the 240 volt indica-
tor light wired to the NC circuit. No lever.
MICRO SWITCH™ HDLS SERIES ELECTRICAL
RATINGS:
DC VOLTS; PILOT DUTY: DC13, R300
PLUNGER ASSEMBLY MODIFICATIONS
Add the following modification numbers to the catalog listing in the
plunger switch:
Electrical Circuitry Vdc
Rating
Make & Break
Amps
Make & Break
Amps
3
4
5
6
7
8
Side plunger to right of switch front
Inductive
Resistive
Side plunger to left of switch front
A, B*
SPDT
DPDT
120
240
0.25
0.15
0.8
0.4
Side plunger to back of switch
Roller on top plungers perpendicular to mounting surface
Light on indicator versions wired to NC circuit
Roller on side plungers in vertical position
* For switches with an indicator light, use only at voltage stated for
indicator light.
For example,
MICRO SWITCH™ HDLS limit switches are capable of the follow-
ing low voltage dc loads
Catalog listing LSF1A3 is an LSF1A switch with the side roller
plunger to the right side.
Circuitry
Vdc
Amps
Amps
Inductive
Resistive
SPDT
DPDT
24
24
10
10
10
10
PLUG-IN VS. NON-PLUG-IN MODELS
Honeywell HDLS limit switches are offered in two styles: non-plug-
in design and plug-in design. With plug-in construction, the wiring
and conduit connection is made to the base receptacle. This
feature reduces downtime as the plug-in unit can be removed and
replaced without disconnecting the wiring or conduit connections
to the switch.
sensing.honeywell.com
8
MICRO SWITCH™ Heavy-Duty Limit Switches
MICRO SWITCH™ HDLS SERIES OPERATING HEADS
SIDE ROTARY: Available levers provide greater versatility. Heads
TOP ROTARY: Available levers provide greater versatility. Heads
may be positioned with shaft on any side. All are momentary action
except maintained head (LSN Series).
may be positioned with shaft on any side. All are momentary action
except maintained head.
LSA - Standard: 60° minimum overtravel,
15° maximum pretravel, 5° (single pole)
and 7° (double pole) maximum differential
travel. Operating temperature range from
-12 °C to 121 °C [10 °F to 250 °F].*
LSB: With 100° minimum overtravel. Vari-
ous levers that fit side rotary shafts may
be used on the top rotary shaft. Switch is
ideal when increased overtravel is required.
Momentary action. Standard operating
temperature range from -1 °C to 121 °C
[30 °F to 250 °F].*
LSR - Low operating torque: 60° minimum overtravel, 15°
maximum pretravel, 0.19 Nm [1.7 in lb] maximum operating
torque. Operating temperature range from -1 °C to 121 °C
[250 °F to 250 °F].*
TOP PLUNGERS: Available with 4,83 mm [0.19 in] minimum
overtravel. Top pin plungers are offered in pin plunger, an adjust-
able plunger, and a roller plunger. Standard temperature range of
-12 °C to 93 °C [10 °F to 200 °F].
LSN - Maintained contact: Maintained on counterclockwise
rotation and reset on clockwise rotation, and vice versa. Operat-
ing temperature range from -1 °C to 121 °C [30 °F to 250 °F].
LSP - Low differential: 68° minimum overtravel, 7° maximum
pretravel, 3° (single pole) and 4° (double pole) maximum differen-
tial travel. Operating temperature range from -12 °C to
121 °C [10 °F to 250 °F].*
LSC - Top pin plunger: A corrosion-
resistant steel plunger for in-line actuating
motion. Oil-tight seals on plunger and
between the operating head and housing
keep out coolant, dust, and chips. Momen-
tary action.
LSH - Low torque, low differential travel: 68° minimum
overtravel. Features low operating torque and narrow differential
travel. Operating temperature range from -1 °C to 121 °C
[30 °F to 250 °F].*
LSD - Top roller plunger: A corrosion-
resistant steel roller and plunger that is
adjustable to 90° angles to accept cam
or slide operation from any of two direc-
tions. Boot seal on the plunger. Momentary
action
LSU - Low pretravel: 5° max. pretravel, 70° min. overtravel,
and a second step of 18° max. Operating temperature range
from -12 °C to 121 °C [10 °F to 250 °F].*
LSL - Sequence action: 48° minimum overtravel. Delayed
action between operation of two poles. Operating temperature
range from -12 °C to 121 °C [10 °F to 250 °F].*
LSV - Adjustable top pin plunger:
Provides easy application and saves on
installation time. The operating points of
the switch can be adjusted from 52,8 mm
to 59,3 mm [2.085 in to 2.335 in]. Seals
are the same as the pin plunger. Momen-
tary action.
LSM - Center neutral: 53° minimum overtravel. One set of
contacts operates on the clockwise rotation, and another set on
the counterclockwise rotation. Operating temperature range from
-1 °C to 121 °C [30 °F to 250 °F].*
LST - Momentary action with extra low torque: 12 in oz of
operating and full travel torque with momentary action. Operating
temperature range from -12 °C to 121 °C [10 °F to 250 °F].*
LSS - Gravity return: Has no return spring mechanism so
weight of the lever must provide the return force. Extremely light
operating torque (5 in oz max.) is useful in conveyor applications
and can be operated by small or lightweight objects. Operating
temperature range from -1 °C to 121 °C [30 °F to 250 °F].*
*(Fluorocarbon seals are preferred for temperatures above 93 °C [200 °F]).
sensing.honeywell.com
9
HDLS Series
MICRO SWITCH™ HDLS SERIES OPERATING HEADS
SIDE PLUNGERS: Available with 4,83 mm [0.19 in] minimum overtravel. Side plungers are offered in plain plunger, an adjustable plain
plunger, a roller plunger, and a maintained plunger. Standard temperature range of -12 °C to 93 °C [10 °F to 200 °F].
LSE - Side pin plunger: For actuat-
ing motion inline with the plunger travel.
Actuating head may be faced in any of
four positions, 90° apart. A boot seal on
the plunger and a gasket seal between the
head and housing keep out coolant, dust,
and chips. Momentary action.
LSW - Adjustable side pin plunger: Has
the same features of the side plain plunger
plus the means to adjust the operating
points of the switch from 41 mm to 47,4
mm [1.615 in to 1.865 in]. Momentary
action.
LSG - Maintained contact side pin
plunger: Offers a maintained contact on
actuation of the switch. A reverse motion
of the plunger resets the switch. Sealing is
the same as other side plunger actuation
heads. Operating temperature range is -1
°C to 93 °C [30 °F to 200 °F].
LSF - Side roller plunger: Fits close
quarters under cams and slides. The head
may be faced in any of four positions, 90°
apart. The roller can be turned vertical
or horizontal to the switch. Boot seal on
plunger. Momentary action.
WOBBLE LEVER ACTUATING HEADS: Heads come with either a spring wire, Delrin® plastic rod, or steel cat whisker. Any movement
of the lever (except pull) will actuate the switch. Standard temperature range of -12 °C to 93 °C [10 °F to 200 °F].
LSJ1A-7M - Spring
wire: 300 Series SST
wire may be formed for
special applications.
LSJ1A-7N - Flexible
LSK1A-8C - Coil
LSJ1A-7A - Plastic rod: LSK1A-8A - Cat whis-
actuator: Designed with spring: Designed with
Recommended where
possible scratching or
ker: 300 Series SST
a tin-plated cable.
a 300 Series SST coil
spring.
actuator designed for low
marring by the actuator is operating force applica-
to be avoided. tions.
*(Fluorocarbon seals are preferred for temperatures above 93 °C [200 °F]).
sensing.honeywell.com
10
MICRO SWITCH™ Heavy-Duty Limit Switches
SPECIAL OPTIONS
HIGH TEMPERATURE/CHEMICAL RESISTANT
SWITCHES
LOW TEMPERATURE SWITCHES
All forms of HDLS limit switches are also available in low-tempera-
ture construction. Design features include fluorosilicone diaphragm,
shaft seals, and external booth seal (where applicable). If pre-wired
with a cable, low temperature limits are
Completely fluorocarbon (FC)-sealed switches have a full FC body
gasket coving the switch cavity. Rotary types have an extra FC
seal on the operating shaft, while plunger versions have FC boot
seals. They are for use in many applications where the environment
includes fire-resistant synthetic fluids. In addition to most all fluids,
the FC-sealed switches may be used with such industrial fluids
such as Cellulube, Fyrquell, Houghto-Safe, Pydraul, and other
special cutting and hydraulic fluids. The additional FC seals also
promote longer operating life for rotary-actuated HDLS switches in
applications where the temperatures are normally -12 °C to 121 °C
[10 °F to 250 °F]. If pre-wired with cable, then temperature limits
are 105 °C [221 °F] dry and 60 °C [140 °F] wet.
-10 °C [14 °F] flex and -30 °C [-22 °F] non-flex.
To order, insert the additional letters Y and B in the appropriate
places in the standard catalog listing, as shown below:
LSA1A
standard, side-rotary plug-in switch
low-temperature version of LSA1A
LSYAB1A
CONDUIT OPENINGS
For conduit openings other than 1/2-NPT and 3/4-NPT, subsitute
the following after LS in the catalog listing:
LS3 PG13,5
To order, insert the additional letters Y and C in the appropriate
places in the standard catalog listing, as shown below:
LS4 20 mm
LSA1A
standard, side-rotary plug-in switch
LSA1A
side rotary with 1/2-14 NPT conduit
side rotary with 20 mm conduit
LSYAC1A
completely FC-sealed version of LSA1A
LS4A1A
Standard HDLS
Low Limit High Limit
Low Temperature HDLS
High Temperature HDLS
(Fluorocarbon Sealed)*: Y_C
TEMPERATURE LIMITS
(Fluorosilicone Sealed): Y_B
Low Limit
High Limit
Low Limit
High
Limit
-12 °C
[10 °F]
-1 °C
[30 °F]
93 °C
121 °C
-40 °C
[-40°F]
-29 °C
93 °C
121 °C
-12 °C
[10 °F]
-1 °C
[30 °F]
121 °C
[250 °F]
[200 °F] [250 °F]
[-20 °F] [200 °F] [250 °F]
LSA - Side Rotary Momentary
LSB - Top Rotary
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
LSC - Top Plain Plunger
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
LSD - Top Roller Plunger
LSE - Side Plain Plunger
LSF - Side Roller Plunger
LSG - Side Plunger, Maintained
LSH - Side Rotary, Low PT, Low Torque
LSJ - Wobble Stick
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
LSK - Cat Whisker
X
LSL - Side Rotary, Sequence
LSM - Side Rotary, Center Neutral
LSN - Side Rotary, Maintained
LSP - Side Rotary, Low Pretravel
LSR - Side Rotary, Low Torque
LSU - 5º Low Pretravel
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
LSV - Top Adjustable Plunger
LSW - Side Adjustable Plunger
X
X
* For HDLS application wherein the upper temperature limit is normally above 93 °C [200 °F], much longer switch life can be obtained by using completely
fluorocarbon-sealed switches rather than standard HDLS.
sensing.honeywell.com
11
HDLS Series
FACTORY SEALED PRE-WIRED LIMIT SWITCHES
WIRING DIAGRAMS (STYLES B&G)
Features
Connectors = Numbers (mini-style)
•
Pre-wired with 6 ft STOOW-A cable or other 4, 5, or 9-pin
connectors (other lengths available
Cables = Colors
SINGLE POLE
Single-Pole
Circuitry
CABLE OR MINI STYLE CONNECTOR
•
•
•
Wire entry area completely factory sealed
(Cable version) NEMA 1, 6, 6P, 12; IP67
WHITE
RED
BLACK
5
1
5
2
1
4
(Connector version) NEMA 1, 6, 6P, 12, 13; IP67
ORANGE
4
2
3
How to order:
To order factory sealed switches, add the modification codes
shown below to the standard HDLS listings:
GREEN
3 = Ground
Circuitry
Cable
C
1/2 in connector style
SPDT
A (4-pin mini-style)
B (5-pin mini-style)
DD (4-pin micro-style)
DPDT
M
R (9-pin mini-style)
Examples:
WIRING DIAGRAMS (STYLES M&R)
LSA1AC = LSA1A with 6 feet of 5-conductor STOW-A cable
LSJ2BM-7N = LSJ2B-7N with 6 feet of 9-conductor STOOW-A
cable
DOUBLE POLE
LSA1AB = LSA1A with a 5-pin mini-style connector
LSA1ADD = LSA1A with a 4-pin micro-style connector
CABLE OR MINI STYLE CONNECTOR
GREEN
NOTE: Connector versions available with 1/2 in conduit only.
BLUE
WHITE
ORANGE
RED
BLACK
1
6
7
2
5
8
9
PINK
WIRING DIAGRAM (STYLE A)
4
3
4
3
BROWN
YELLOW
3
4
2
1
Double-Pole Circuitry
1
2
4
5
3
6
8
9
1
WIRING DIAGRAM (STYLE DD)
2
4
2
3
1
4
7 = Ground
1
2
Pin 3 not connected
sensing.honeywell.com
12
MICRO SWITCH™ Heavy-Duty Limit Switches
SIDE ROTARY • MICRO SWITCH™ HDLS SERIES ORDER GUIDE/RECOMMENDED LISTINGS
Standard (LSA)
Low Differential
(LSP)
5° Pretravel (LSU)
Standard
Low pretravel &
Low pretravel
Description
low differential travel
SPDT
DPDT
SPDT
DPDT
SPDT
DPDT
Snap Action
2NO/2NC
Snap Action
2NO/2NC
Snap Action
1NO/1NC
Snap Action
2NO/2NC
Snap Action
1NO/1NC
Snap Action
1NO/1NC
3
4
3
1
3
4
3
4
4
2
3
1
4
2
3
1
4
2
1
1
1
2
2
2
7
8
7
5
7
8
8
6
0°
5°
0°
5
5
2°
6
6
0°
9°
10°
6°
15°
0°
5°
1°
0°
0°
9°
5°
8°
15°
75° ꢀ ꢁ
75°
ꢀ ꢁ
75° ꢀ ꢁ
Contact closed n
Contact open o
75° ꢀ ꢁ
75° ꢀ ꢁ
75° ꢀ ꢁ
9° max.
4° max.
66° min.
Pretravel
15° max.
5° max.
60° min.
15° max.
7° max.
60° min.
9° max.
3° max.
66° min.
5° max.
3° max.
70° min.
5° max.
4° max.
70° min.
Different. travel
Overtravel
Oper. torque
Action
0,45 Nm [4 in-lb] max.
0,45 Nm [4 in-lb] max.
CW & CCW (Momentary)
0,45 Nm [4 in-lb] max.
Op. temp range3
-12 °C to 121 °C [10 °F to 250 °F]
(for low temp, high temp, or preleaded versions, see pages 11-12)
Circuitry
Contacts Body Style2
Conduit Options
(NPT)
0.5 in
0.5 in
0.5 in
0.5 in
Silver
Gold4
Silver
Silver
Plug-in
Plug-in
Plug-in
Plug-in
LSA1A
LSP1A
LSP1E
LSP5A
LSP8A
LSU1A
LSA1E
LSA5A
LSA8A
LSU1E
LSU5A
LSU8A
ꢀ
ꢁ
ꢂ
ꢃ
120 V Ind. lite1
240 V Ind. lite1
SPDT
Double Break
24 V LED 1.5 mA
max. auto polarity1
Silver
Plug-in
0.5 in
LSA9A
LSP9A
LSU9A
Silver
Silver
Gold4
Silver
Gold4
Silver
Silver
Silver
Non-plug-in 0.5 in
LSA3K
LSA2B
LSA2S
LSA6B
LSA6S
LSA2R
LSA4L
LSA7L
LSP3K
LSP2B
–
LSU3K
LSU2B
–
Plug-in
Plug-in
Plug-in
Plug-in
Plug-in
0.75 in
0.75 in
0.5 in
ꢄ
ꢅ
ꢆ
ꢇ
ꢀ
ꢁ
ꢂ
ꢃ
LSP6B
–
LSU6B
–
0.5 in
120 V Ind. lite1
0.75 in
LSP2R
LSP4L
LSP7L
LSU2R
LSU4L
LSU7L
DPDT
Double Break
Non-plug-in 0.75 in
Non-plug-in 0.5 in
1 Use at voltage indicated for light. Wired to NO circuit. Upper temperature limit for lighted units is 93 °C [200 °F]
2 Plug-in listings include base receptacle
3 Completely fluorocarbon sealed switches are preferred for use in temperatures above 93 °C [200 °F]
4 Gold-plated contacts
NOTE: Same polarity each pole.
To order a fluorocarbon sealed switch, insert the letters Y and C into the catalog listing as follows. The LSA1A limit switch is changed to a LSYAC1A limit switch.
To order a low temperature, fluorosilicone sealed switch, insert the letters Y and B into the catalog listing as follows. The LSA1A limit switch is changed to a LSYAB1A limit switch.
sensing.honeywell.com
13
HDLS Series
SIDE ROTARY • MICRO SWITCH™ HDLS SERIES ORDER GUIDE/RECOMMENDED LISTINGS
Low Torque (LSR)
Low Diff., Low Torque (LSH)
Low pretravel and low torque
Description
Low operating torque
SPDT
DPDT
SPDT
DPDT
Snap Action
1NO/1NC
Snap Action
2NO/2NC
Snap Action
1NO/1NC
Snap Action
2NO/2NC
3
4
3
4
3
1
3
4
4
2
1
1
1
2
2
2
7
5
7
5
8
6
8
6
0°
0°
9°
6°
10°
15°
75°
0°
9°
0°
5°
8
15°
75° ꢀ ꢁ
ꢀ ꢁ
Contact closed n
Contact open o
75° ꢀ ꢁ
75° ꢀ ꢁ
Pretravel
15° max.
5° max.
60° min.
15° max.
7° max.
60° min.
9° max.
3° max.
66° min.
9° max.
4° max.
Different. travel
Overtravel
66° min.
Oper. torque
Action
0,19 Nm [1.7 in-lb] max.
0,19 Nm [1.7 in-lb] max.
CW & CCW (Momentary)
Op. temp range3
-1 °C to 121 °C [30 °F to 250°F] (for low temp, high temp, or preleaded versions, see pages 11-12)
Circuitry
Contacts Body Style2
Conduit Options
(NPT)
0.5 in
0.5 in
0.5 in
0.5 in
Silver
Gold4
Silver
Silver
Plug-in
Plug-in
Plug-in
Plug-in
LSR1A
LSR1E
LSR5A
LSR8A
LSH1A
LSH1E
LSH5A
LSH8A
ꢀ
ꢁ
ꢂ
ꢃ
120 V Ind. lite1
240 V Ind. lite1
SPDT
Double Break
24 V LED 1.5 mA
max. auto polarity1
Silver
Plug-in
0.5 in
LSR9A
LSH9S
Silver
Silver
Silver
Silver
Silver
Non-plug-in
Plug-in
0.5 in
LSR3K
LSR3B
LSR6B
LSR2R
LSR4L
LSH3K
LSH2B
LSH6B
LSH2R
LSH4L
0.75 in
0.5 in
ꢄ
ꢅ
ꢆ
ꢇ
ꢀ
Plug-in
ꢁ
ꢂ
ꢃ
120 V Ind. lite1
Plug-in
0.75 in
0.75 in
Non-plug-in
DPDT
Double Break
Silver
Non-plug-in
0.5 in
LSR7L
LSHJ7L
1 Use at voltage indicated for light. Wired to NO circuit. Upper temperature limit for lighted units is 93°C [200 °F]
2 Plug-in listings include base receptacle
3 Completely fluorocarbon sealed switches are preferred for use in temperatures above 93 °C [200 °F]
4 Gold-plated contacts
NOTE: Same polarity each pole.
To order a fluorocarbon sealed switch, insert the letters Y and C into the catalog listing as follows. The LSA1A limit switch is changed to a LSYAC1A limit switch.
To order a low temperature, fluorosilicone sealed switch, insert the letters Y and B into the catalog listing as follows. The LSA1A limit switch is changed to a LSYAB1A limit switch.
sensing.honeywell.com
14
MICRO SWITCH™ Heavy-Duty Limit Switches
SIDE ROTARY • MICRO SWITCH™ HDLS SERIES ORDER GUIDE/RECOMMENDED LISTINGS
Maint.
Contact
(LSQ)
Maint. Contact
(LSN)
Center Neutral
(LSM)
Sequence Action
(LSL)
Maint.
360° Alt.
Action
Maintained,
Center Neutral
(Pole 1 operates
CCW; Pole 2
Sequential
2-pos1,2. Std.
(Pole 1 operates
before Pole 2, either
CW, CCW, or both)
Description
operates CW)
SPDT
SPDT DPDT
DPDT
DPDT
Maintained
Contact
Maintained
Contact
3
1
4
2
3
1
4
2
Maintained
Contact
0°
ꢀ ꢁ ꢁ ꢀ
75°
0°
7
5
8
6
3
4
10°
20°
15°
25°
1
0°
8°
2
18°
0°
0°
90°
180°
270°
25°
25°
18°
0°
8°
75°
65°
65°
75°
ꢀ
ꢁ
Contact closed n
Contact open o
85° ꢀ ꢁ
85° ꢀ ꢁ
0°
Pole 1: 15°
Pole 2: add’l 10°
Pretravel
65° max.
65° max.
18° max.
Different. travel
Overtravel
Oper. torque
Action
40° max.
20° min.
40° max.
20° min.
10° max.
57° min.
each pole: 5°
48° min.
0,45 Nm [4 in-lb]
Maintained
0,45 Nm [4 in-lb]
0,45 Nm [4 in-lb]
CW & CCW (Momentary)
-12 °C to 121 °C
-1 °C to 121 °C [30 °F to 250°F]
Op. temp range6
[10 °F to 250°F]
(for low temp, high temp, or preleaded versions, see page 11-12)
(for low temp, high temp, or pre-
leaded versions, see page 11-12)
Circuitry
Contacts Body Style5 Conduit Options
(NPT)
0.5 in
0.5 in
0.5 in
0.5 in
Silver
Gold3
Silver
Silver
Silver
Plug-in
Plug-in
Plug-in
Plug-in
LSQ300
LSN1A
LSN1E
LSN5A
LSN8A
LSN3K
–
–
–
–
ꢀ
ꢁ
ꢂ
ꢃ
120 V Ind. lite4
240 V Ind. lite4
POLE 1
POLE 2
SPDT
Double Break
Non-plug- 0.5 in
in
Silver
Silver
Gold3
Silver
Plug-in
Plug-in
Plug-in
0.75 in
0.5 in
0.5 in
–
–
–
–
LSN2B
LSN6B
–
LSM2D
LSL2C
LSL6C
–
ꢄ
ꢅ
ꢆ
ꢇ
ꢀ
LSM6D
LSM6U
LSM4N
ꢁ
ꢂ
ꢃ
Non-plug- 0.75 in
in
LSN4L
LSL4M
DPDT
Double Break
Silver
Non-plug- 0.5 in
in
–
LSN7L
LSM7N
LSL7M
1 Mechanical trip before electrical trip.
2 Total travel is approximately 80° max. Maintained contact switch normally used with LSZ53 yoke actuator.
3 Gold-plated contacts
4 Use at voltage indicated for light. Wired to NO circuit. Upper temperature limit for lighted units is 93°C [200 °F].
5 Plug-in listings include base receptacle
6 Completely fluorocarbon-sealed switches are preferred for temperatures above 93 °C [200 °F].
NOTE: Same polarity each pole.
To order a fluorocarbon sealed switch, insert the letters Y and C into the catalog listing as follows. The LSA1A limit switch is changed to a LSYAC1A limit switch.
To order a low temperature, fluorosilicone sealed switch, insert the letters Y and B into the catalog listing as follows. The LSA1A limit switch is changed to a LSYAB1A limit switch.
sensing.honeywell.com
15
HDLS Series
Figure 3. MICRO SWITCH™ HDLS side rotary (double pole)
dimensions
Figure 2. MICRO SWITCH™ HDLS side rotary (single pole)
dimensions
SPDT Plug-in (mm[in])
DPDT Plug-in (mm[in])
39,6
39,6
[1.56]
[1.56]
62,0
[2.44]
62,0
[2.44]
14,7
[.58]
14,7
[.58]
19,0
19,0
[.75]
[.75]
MTG PADS
MTG PADS
7,32
[.29]
7,32
[.29]
106,7
[4.20]
119
59,4
[4.69]
59,4
70,4
[2.34]
[2.34]
[2.77]
82,6
89,5
[3.53]
74,9
[3.53]
[2.95]
CONDUIT OPENING
LOCATION
18,8
[.74]
29,4
29,4
16,5
[1.16]
[1.16]
[.65]
CONDUIT OPENING
LOCATION
41,1
25,4
[1.62]
47,8
26,4
[1.00]
[1.88]
[1.04]
44,5
2X 5,2 [.20]
Ø
MTG HOLES
2X 10-32 UNF
2X 10-32 UNF
45,3
[1.75]
TAPPED FROM REAR ONLY
2X 5,2 [.20] Ø MTG HOLES
8,0 [.32] Ø C'BORE X 7,8 [.31] DEPTH
[1.78]
TAPPED FROM REAR ONLY
SPDT Non-plug-in
(mm[in])
DPDT Non-plug-in
(mm[in])
39,6
39,6
[1.56]
[1.56]
62,0
[2.44]
14,7
[.58]
19,0
[.75]
14,7
[0.58]
MTG PADS
19,05
[.75]
MTG PADS
7,32
[.29]
119
[4.69]
59,4
[2.34]
59,5
82,6
70,4
[2.34]
89,7
[3.25]
[2.77]
[3.53]
75,9
[2.97]
20,3
[0.8]
21,3
[.84]
29,4
29,4
CONDUIT OPENING
LOCATION
[1.16]
[1.16]
41,1
38,1
CONDUIT OPENING
LOCATION
36,6
[1.62]
[1.50]
47,8
[1.44]
[1.88]
45,3
2X 10-32 UNF
TAPPED FROM REAR ONLY
[1.78]
2X 10-32 UNF
TAPPED FROM REAR ONLY
44,5
[1.75]
2X 5,2 [.20] MTG HOLES
Ø
2X 5,2 [.20] MTG HOLES
8,0 [.32] Ø C'BORE X 7,8 [.31] DEPTH
Ø
sensing.honeywell.com
16
MICRO SWITCH™ Heavy-Duty Limit Switches
TOP ROTARY • MICRO SWITCH™ HDLS SERIES ORDER GUIDE/RECOMMENDED LISTINGS
Top Rotary (LSB)
Increased overtravel (100° min.). Uses same levers as side rotary
Description
SPDT
DPDT
Snap Action
1NO/1NC
Snap Action
2NO/2NC
3
1
3
1
4
2
4
2
7
5
8
6
0°
15°
25°
0°
13°
25°
135°
ꢀ ꢁ
Contact closed n
Contact open o
135°
ꢀ ꢁ
Pretravel
25° max.
10° max.
110° min.
25° max.
12° max.
110° min.
Different. travel
Overtravel
Oper. torque
Op. temp range3
0,28 Nm [2.5 in lb] max.
-12 °C to 121 °C [10 °F to 250 °F] (for low temp, high temp, or preleaded versions, see pages 11-12)
Circuitry
Contacts Body Style2
Conduit Options
(NPT)
0.5 in
0.5 in
0.5 in
0.5 in
0.5 in
Silver
Gold4
Silver
Silver
Silver
Plug-in
Plug-in
Plug-in
Plug-in
Plug-in
LSB1A
LSB1E
LSB5A
LSB8A
LSB9A
–
–
–
–
–
ꢀ
ꢁ
ꢂ
ꢃ
120 V Ind. lite1
240 V Ind. lite1
SPDT
Double Break
24 V LED 1.5 mA
max. auto polarity1
Silver
Silver
Silver
Silver
Silver
Silver
Non-plug-in 0.5 in
LSB3K
–
Plug-in
Plug-in
Plug-in
0.75 in
0.5 in
–
–
–
–
–
LSB2B
LSB6B
LSB2R
LSB4L
LSB7L
ꢄ
ꢅ
ꢆ
ꢇ
ꢀ
ꢁ
ꢂ
ꢃ
120 V Ind. lite1
0.75 in
Non-plug-in 0.75 in
Non-plug-in 0.5 in
DPDT
Double Break
1 Use at voltage indicated for light. Wired to NO circuit. Upper temperature limit for lighted units is 93 °C [200 °F]
2 Plug-in listings include base receptacle
3 Completely fluorocarbon sealed switches are preferred for use in temperatures above 93 °C [200 °F]
4 Gold-plated contacts
NOTE: Same polarity each pole.
To order a fluorocarbon sealed switch, insert the letters Y and C into the catalog listing as follows. The LSA1A limit switch is changed to a LSYAC1A limit switch.
To order a low temperature, fluorosilicone sealed switch, insert the letters Y and B into the catalog listing as follows. The LSA1A limit switch is changed to a LSYAB1A limit switch.
sensing.honeywell.com
17
HDLS Series
Figure 4. MICRO SWITCH™ HDLS top rotary (single pole) dimen-
sions
Figure 5. MICRO SWITCH™ HDLS top rotary (double pole)
dimensions
SPDT Plug-in (mm[in])
DPDT Plug-in (mm[in])
21,6
[.85]
21,6
[.85]
39,8
39,6
Ø 7,4 DIA.
[Ø 0.29] DIA.
[1.56]
[1.56]
MTG PADS
7,32
MTG PADS
DIA
[.29]
57,2
[2.25]
57,2
127.6
[5.02]
36,4
[2.25]
42,4
42,4
36,4
[1.43]
[1.67]
[1.67]
[1.43]
139,8
[5.5]
59,5
59,4
[2.34]
89.7
70,4
[2.34]
74,9
82,6
[3.53]
[2.77]
[2.95]
[3.25]
16,5
[.65]
25,4
[1.00]
39,1
[1.54]
29,4
18,8
[.74]
29,4
[1.16]
[1.16]
41,1
26,4
[1.04]
[1.62]
47,8
[1.88]
44,4
2X 5,2 [.20]
Ø
MTG HOLES
45,3
[1.75]
CONDUIT OPENING
LOCATION
2X 10-32 UNF
TAPPED FROM REAR ONLY
[1.78]
CONDUIT OPENING
LOCATION
2X 10-32 UNF
TAPPED FROM REAR ONLY
2X 5,2 [.20]
Ø MTG HOLES
8,0 [.32] Ø C'BORE X 7,8 [.31] DEPTH
SPDT Non-plug-in (mm[in])
DPDT Non-plug-in (mm[in])
21,6
[.85]
21.6
[.85]
39,6
39.8
[1.56]
[1.56]
7,32
MTG PADS
DIA
7,4
[.29]
MTG PADS
DIA
[.29]
57,2
[2.25]
36,4
36,4
36,4
42,4
42,4
[1.43]
[1.43]
[1.43]
[1.67]
[1.67]
127,6
[5.02]
139.8
[5.5]
59,5
[2.34]
59,4
75,8
89.7
70,4
[2.34]
82.6
[2.98]
[3.53]
[2.77]
[3.25]
29,4
20,3
[.80]
36,6
[1.44]
21,3
[.84]
38,1
[1.50]
[1.16]
29,4
41,1
[1.16]
[1.62]
39,0
[1.54]
47.8
45,3
[1.88]
CONDUIT OPENING
LOCATION
2X 5,2 [.20] Ø MTG HOLES
44,4
[1.78]
[1.75]
2X 10-32 UNF
TAPPED FROM REAR ONLY
CONDUIT OPENING
LOCATION
2X 10-32 UNF
TAPPED FROM REAR ONLY
DIMS: MM
[IN]
DIMS: MM
[IN]
2X 5,2 [.20]
8,0 [.32]
Ø
MTG HOLES
C'BORE X 7,8 [.31] DEPTH
Ø
sensing.honeywell.com
18
MICRO SWITCH™ Heavy-Duty Limit Switches
Table 2. Common levers for use with MICRO SWITCH™ HDLS Rotary Switches
Levers for use with side or top rotary actuated switches are available in a wide choice of sizes and materials. The most common listings are
shown below. Rollers may be on either side of the lever to best match the external acutating mechanism.
LSZ59A,LSZ59B,
LSZ59C,LSZ59D
short fixed lever,
front/back
LSZ51A&C
fixed rotary lever,
nylon roller, front/
backl
LSZ51B&D
fixed rotary lever,
steel roller, front/
back
LSZ69CA
spoke lever - 152 mm [6 in]
LSZ55A,LSZ55B,
LSZ55C,LSZ55D
offset lever,
LSZ53A, LSZ53B, LSZ53C,
LSZ53D
yoke lever, nylon and steel rollers,
front/back placement
LSZ60
one-way
roller lever
LSZ54R
spring wire
305 mm [12 in]
front/back
LSZ52K
LSZ54M
adjustable lever,
aluminum rod
nylon roller
Ø 140 mm
Ø 38,1 mm
[Ø 5.5 in]
LSZ52A, LSZ52B,
LSZ52C, LSZ52D
adj. lever, nylon/
LSZ52J
adjustable lever,
nylon roller
LSZ68
LSZ54N
LSZ61
loop
152 mm [6 in]
LSZ67AA*
Plastic conveyor roller
rod w/ spring stainless steel
305 mm
[12 in]
rod 330 mm
[13 in]
steel, front/back
Ø 25,4 mm [Ø 1 in]
[Ø 1.5 in]
* May require orientation of switch and lever to enable gravity to help restore free position of switch.
sensing.honeywell.com
19
HDLS Series
Table 3. HDLS SERIES ACTUATOR CODE TABLE (see previous page)
Catalog
Listing
Material
Rod/Roller Rod/Roller Roller
Catalog
Listing
Material
Rod/Roller Rod/Roller Roller
Dia. mm
[in]
Width mm
[in]
Mounting
Dia. mm
[in]
Width mm
[in]
Mounting
Fixed 38,1 mm [1.5 in] radius
Fixed 38,1 mm [1.5 in] radius
–
Rollerless
Nylon
n/a
n/a
n/a
–
Rollerless
Nylon
Steel
n/a
n/a
n/a
LSZ51A
LSZ51B
LSZ51C
LSZ51D
LSZ51F
LSZ51G
LSZ51J
LSZ51L
LSZ51M
LSZ51N
LSZ51P
19 [0.75]
19 [0.75]
19 [0.75]
19 [0.75]
6,35 [0.25] Front
6,35 [0.25] Front
6,35 [0.25] Back
6,35 [0.25] Back
LSZ55A
LSZ55B
LSZ55C
LSZ55D
LSZ55E
LSZ55K
19 [0.75]
19 [0.75]
19 [0.75]
19 [0.75]
19 [0.75]
6,35 [0.25] Back
6,35 [0.25] Back
6,35 [0.25] Front
6,35 [0.25] Front
12,7 [0.50] Front
Steel
Nylon
Nylon
Steel
Steel
Nylon
25,4 [1.0] 12,7 [0.50] Front
38,1 [1.5] 6,35 [0.25] Front
25,4 [1.0] 12,7 [0.50] Back
Nylon
Nylon
Nylon
38,1 [1.5] 6,35 [0.25] Front
Nylon
Short fixed - 33 mm [1.3 in] radius
Ball bearing
Nylon
19 [0.75]
19 [0.75]
19 [0.75]
19 [0.75]
6,35 [0.25] Back
31,7 [1.25] Back
31,7 [1.25] Front
12,7 [0.50] Front
LSZ59A
LSZ59B
LSZ59C
LSZ59D
Nylon
Steel
Nylon
Steel
19 [0.75]
19 [0.75]
19 [0.75]
19 [0.75]
6,35 [0.25] Front
6,35 [0.25] Front
6,35 [0.25] Back
6,35 [0.25] Back
Steel
Nylon
Adjustable 38,1 mm to 89,0 mm [1.5 in to 3.5 in] radius
–
Rollerless
Nylon
n/a
n/a
n/a
LSZ52A
LSZ52B
LSZ52C
LSZ52D
LSZ52E
LSZ52J
LSZ52K
LSZ52L
LSZ52M
LSZ52N
19 [0.75]
19 [0.75]
19 [0.75]
19 [0.75]
19 [0.75]
6,35 [0.25] Back
6,35 [0.25] Back
6,35 [0.25] Front
6,35 [0.25] Front
33,0 [1.30] Front
38,1 mm [1.5 in] radius one-way roller lever
Steel
LSZ60A
LSZ60B
Nylon
Steel
19 [0.75]
19 [0.75]
6,35 [0.25] Front
6,35 [0.25] Front
Nylon
Steel
Nylon
Nylon
25,4 [1.0] 12,7 [0.50] Front
38,1 [1.5] 6,35 [0.25] Front
Nylon
Ball bearing
Nylon
19 [0.75]
6,35 [0.25] Front
Flexible loop
50,8 [2.0] 6,35 [0.25] Front
LSZ61
Ø 4,8 [Ø 0.19] 152 mm [6 in] flexible loop
Nylatron
Nylon
19 [0.75]
12,7 [0.50] Front
LSZ618
LSZ54
Ø 4,8 [Ø 0.19] 241 mm [9.5 in] flexible loop
Nylatron
Yoke – 38,1 mm [1.5 in] radius
LSZ53A
LSZ53B
LSZ53D
LSZ53E
LSZ53M
Nylon
Steel
Steel
Nylon
Nylon
19 [0.75]
19 [0.75]
19 [0.75]
19 [0.75]
19 [0.75]
6,35 [0.25] Front/Back
6,35 [0.25] Front/Back
6,35 [0.25] Front/Front
6,35 [0.25] Back/Front
31,7 [1.25] Back/Front
Hub only
n/a
n/a
n/a
LSZ53P
LSZ53S
Rod
Steel
19 [0.75]
19 [0.75]
6,35 [0.25] Back/Back
6,35 [0.25] Back/Back
Nylon
Spring rod
LSZ68
Delrin rod,
305 [12 ]
Ø 6,35
n/a
n/a
n/a
n/a
n/a
n/a
–
Hub only
n/a
n/a
n/a
n/a
n/a
n/a
n/a
[Ø 0.25]
LSZ617
LSZ686
Delrin rod,
406 [16]
Ø 6,35
[Ø 0.25]
LSZ54M
LSZ54N
Alum, 140
mm [5.5 in]
Ø 3,2
[Ø 0.125]
Delrin rod,
152 [6]
Ø 6,35
[Ø 0.25]
Stainless, 330 Ø 3,2
mm [13 in]
[Ø 0.125]
LSZ54R
LSZ54V
SST spring
Ø 1,9
n/a
n/a
n/a
n/a
wire, 305 mm [Ø 0.075]
[12 in]
Flex cable (tin Ø 4,8
plated steel), [Ø 0.19]
122 mm
Rubber roller levers
[4.8 in]
LSZ51Y
Rubber
Rubber
Rubber
50 [2.0]
50 [2.0]
50 [2.0]
12,7 [0.50] front
12,7 [0.50] front
12,7 [0.50] front
LSZ54P
LSZ54W
LSZ59T
Plastic rod,
305 mm
[12 in]
Ø 6,85
n/a
n/a
n/a
n/a
n/a
n/a
38,1 mm [1.5 in]
radius (std.)
[Ø 0.27]
LSZ55Y
38,1 mm [1.5 in]
radius (offset)
Plastic rod,
183 mm
[7.2 in]
Ø 6,85
[Ø 0.27]
LSZ52Y
330 [13]
stainless steel [Ø 0.19]
Ø 4,8
38,1 mm to 89,0
mm [1.5 in to
3.5 in] radius
(adjustable)
Spoke
LSZ69CA
152 mm [6.0 3,2 [0.125] n/a
in] Stainless
n/a
Plastic roller levers
LSZ67AA*
(conveyor)
Plastic
38,1 [1.5] 96,5 [3.8] n/a
* may require orientation of switch and lever to enable gravity to help restore free position of switch.
sensing.honeywell.com
20
MICRO SWITCH™ Heavy-Duty Limit Switches
MICRO SWITCH™ HDLS SIDE ROTARY LEVERS’ CAM TRACKING
Levers for side and top rotary switches are normally ordered as separate catalog listings. They also may be ordered by including a suffix to
the switch catalog listing (see nomenclature tree in this document) and adding the lever price.
Figure 6. LSZ51 type levers cam tracking
Figure 7. LSZ52 type levers cam tracking
57,4 - 63,8
6,35 mm x 19,0 mm dia
[0.25 in x 0.75 in dia] OR
56,4 mm to 62,7 mm
[2.22 in to 2.47 in]
adjustment
[2.26 - 2.51]
ADJUSTMENT
LEVER INVERTED
58,9 - 65,3
6,35 mm x 38,1 mm dia
[0.25 in x 1.5 in dia] OR
[2.32 - 2.57]
51,0 - 57,4
ADJUSTMENT
[2.01 - 2.26]
ADJUSTMENT
42,9 - 49.3
12,7 mm x 25,4 mm dia
[0.50 in x 1.0 in dia]
[1.69 - 1.94]
6,35 X 19,0 DIA
[.25 X .75 DIA]
ADJUSTMENT
6,35 X 19,0 DIA
[.25 X .75 DIA]
LEVER
INVERTED
21,3
[.85]
21,3 mm
[0.85 in]
21,3
[.85]
38,1
[1.5]
38,1 mm to 91,1 mm
38,1
[1.50]
[1.5 in to 3.6 in]
adjustment
25,4
[1.00]
25,4
[1.00]
19,0
[.75]
25,4 mm
[1.00 in]
19,05
[.75]
19,0 mm
[0.75 in]
11,0
[.43]
6,35
6,35
[.25]
11,0
[.43]
[.25]
ADJUSTMENT
ADJUSTMENT
6,35 mm
[0.25 in]
adjustment
11,0 mm
[0.43 in]
Figure 8. LSZ54 type levers cam tracking
Figure 9. LSZ55 type levers cam tracking
78,2 mm to 84,6 mm
[3.08 in to 3.33 in]
adjustment
58,7 mm to 65,0 mm
[2.31 in to 2.56 in]
adjustment
6,35 mm x 19,0 mm dia
[0.25 in x 0.75 in dia.]
70,9 mm to 77,2 mm
[2.79 in to 3.04 in]
adjustment
21,3 mm
[0.85 in]
21,3 mm
[0.85 in]
127,0 mm [5.0 in] max. aluminum rod
330,2 mm [13.0 in] max. stainless steel rod
38,1 mm
[1.50 in]
25,4 mm
[1.00 in]
25,4 mm
[1.0 in]
19,05 mm
[0.75 in]
9,05 mm
[0.75 in]
11,0 mm
[0.43 in]
11,0 mm
[0.43 in]
6,35 mm
[0.25 in]
adjustment
5,3 mm
[0.21 in]
adjustment
sensing.honeywell.com
21
HDLS Series
TOP PLUNGERS • MICRO SWITCH™ HDLS SERIES ORDER GUIDE/RECOMMENDED LISTINGS
All top plungers are momentary action.
Plain (LSC)
Roller (LSD)
Adjustable (LSV)
Top plain plunger for
in-line operating motion
Roller plunger
can be rotated at 90°
increments
Adjustable top plain
plunger
Description
SPDT
DPDT
SPDT
DPDT
SPDT
DPDT
Snap Action
2NO/2NC
Snap Action
2NO/2NC
Snap Action
2NO/2NC
Snap Action
1NO/1NC
Snap Action
1NO/1NC
Snap Action
1NO/1NC
3
1
4
2
3
1
4
2
3
1
4
2
3
4
3
4
3
1
4
2
7
5
8
6
1
7
5
1
2
8
6
2
7
5
8
6
0 in
0 in
0 in
0 in
0 in
0 in
1,4 mm
[0.055 in
1,4 mm
[0.055 in]
1,4 mm
[0.055 in]
1,78 mm
[0.07 in]
1,78 mm
[0.07 in]
1,78 mm
[0.07 in]
1,27 mm
[0.050 in]
1,27 mm
[0.050 in]
1,27 mm
[0.050 in]
1,4 mm
[0.07 in]
1,4 mm
[0.07 in]
1,4 mm
[0.07 in]
6,6 mm
[0.26 in] ꢀ ꢁ
6,6 mm
[0.26 in] ꢀ ꢁ
6,6 mm
[0.26 in] ꢀ ꢁ
6,6 mm
[0.26 in]
6,6 mm
6,6 mm
[0.26 in]
[0.26 in]
ꢀ ꢁ
ꢀ ꢁ
ꢀ ꢁ
Contact closed n
Contact open o
Pretravel
1,78 mm [0.07 in]
0,38 mm 0,51 mm
[0.015 in] [0.02 in]
Different. travel
0,38 mm
[0.015 in]
0,51 mm
[0.02 in]
0,38 mm
[0.015 in]
0,51 mm
[0.02 in]
Overtravel
4,83 mm [0.19 in]
55,9 mm [2.20 in]
Operating point
(nom.)
45,8 mm [1.805 in]
53 mm to 59 mm
[2.08 in to 2.34 in]
Operating force
Op. temp range3
17,8 N [4 lb] max.
-12 °C to 93 °C [10 °F to 200 °F] (for low temp, high temp, or preleaded versions, see page 11-12)
Circuitry
Contacts Body Style2
Conduit Options
(NPT)
0.5 in
0.5 in
0.5 in
0.5 in
Silver
Gold4
Silver
Silver
Silver
Silver
Silver
Silver
Silver
Plug-in
Plug-in
Plug-in
Plug-in
LSC1A
LSC1E
LSC5A
LSC8A
LSC3K
LSC2B
LSC2R
LSC6B
LSC4L
LSD1A
LSD1E
LSD5A
LSD8A
LSD3K
LSD2B
LSD2R
LSD6B
LSD4L
LSV1A
LSV1E
LSV5A
LSV8A
LSV3K
LSV2B
LSV2R
LSV6B
LSV4L
ꢀ
ꢁ
ꢂ
ꢃ
120 V Ind. lite1
240 V Ind. lite1
SPDT
Double Break
Non-plug-in 0.5 in
Plug-in
Plug-in
Plug-in
0.75 in
0.5 in
ꢄ
ꢅ
ꢆ
ꢇ
ꢀ
ꢁ
ꢂ
ꢃ
120 V Ind. lite1
0.75 in
Non-plug-in 0.75 in
DPDT
Double Break
Silver
Non-plug-in 0.5 in
LSC7L
LSD7L
LSV7L
1 Use at voltage indicated for light. Wired to NO circuit. Upper temperature limit for lighted units is 93 °C [200 °F]
2 Plug-in listings include base receptacle
3 Completely fluorocarbon sealed switches are preferred for use in temperatures above 93 °C [200 °F]
4 Gold-plated contacts
NOTE: Same polarity each pole.
To order a fluorocarbon sealed switch, insert the letters Y and C into the catalog listing as follows. The LSA1A limit switch is changed to a LSYAC1A limit switch.
To order a low temperature, fluorosilicone sealed switch, insert the letters Y and B into the catalog listing as follows. The LSA1A limit switch is changed to a LSYAB1A limit switch.
sensing.honeywell.com
22
MICRO SWITCH™ Heavy-Duty Limit Switches
Figure 10. MICRO SWITCH™ HDLS LSC Series (single pole
plunger dimensions
Figure 11. MICRO SWITCH™ HDLS LSC Series (double pole
plunger dimensions
SPDT Plug-in (mm[in])
DPDT Plug-in (mm[in])
14,7
[.58]
14,7
[.58]
21,6
[.85]
21,6
[.85]
9,4
[.37]
9,4
[.37]
39,6
[1.56]
Ø 25,4
[1.0]
39,6
[1.56]
Ø 25,4
[1.0]
46,0
46,0
MTG PADS
[1.81]
[1.81]
OPERATING POINT
MTG PADS
OPERATING POINT
28,7
[1.13]
28,7
[1.13]
59,5
[2.34]
59,4
[2.34]
70,4
[2.77]
82,6
[3.25]
74,9
[2.95]
89,7
[3.53]
CONDUIT OPENING
LOCATION
29,4
29,4
[1.16]
[1.16]
16,5
[.65]
41,1
[1.62]
CONDUIT OPENING
47,8
[1.88]
LOCATION
25,4
[1.00]
18,8
[.74]
26,4
[1.04]
2X 5,2 [.20] Ø MTG HOLES
39,1
[1.54]
2X 10-32 UNF
TAPPED FROM REAR ONLY
45,3
[1.78]
2X 10-32 UNF
44,5
[1.75]
2X 5,2 [.20] Ø MTG HOLES
9,5 [.37] Ø C'BORE X 7,8 [.31] DEPTH
TAPPED FROM REAR ONLY
SPDT Non-plug-in (mm[in])
DPDT Non-plug-in (mm[in])
21,6
[.85]
21,6
[.85]
14,7
[.58]
14,7
[.58]
9,4
[.37]
9,4
[.37]
Ø 25,4
[1.50]
39,6
[1.56]
Ø 25,4
[1,0]
39,6
[1.56]
46,0
46,0
[1.84]
MTG PADS
MTG PADS
OPERATING POINT
[1.81]
28,7
[1.13]
28,7
[1.13]
OPERATING POINT
59,5
[2.34]
89,7
[3.53]
59,4
[2.34]
82,6
[3.25]
70,4
[2.77]
75,8
[2.98]
29,4
[1.16]
29,4
[1.16]
CONDUIT OPENING
LOCATION
47,8
[1.88]
CONDUIT OPENING
LOCATION
21,3
[0.84]
41,1
[1.62]
20,3
[.80]
38,1
[1.50]
2X 10-32 UNF
TAPPED FROM REAR ONLY
36,6
[1.44]
2X 10-32 UNF
45,3
[1.78]
TAPPED FROM REAR ONLY
2X 5,2 [.20] Ø MTG HOLES
8,0 [.32] Ø C'BORE X 7,8 [.31] DEPTH
39,0
[1.54]
2X 5,2 [.20] Ø MTG HOLES
44,4
[1.75]
sensing.honeywell.com
23
HDLS Series
Figure 12. MICRO SWITCH™ HDLS LSD Series (single pole) top
roller plunger dimensions
Figure 13. MICRO SWITCH™ HDLS LSD Series (double pole) top
roller plunger dimensions
SPDT Plug-in (mm[in])
DPDT Plug-in (mm[in])
39,6
[1.56]
39,6
[1.56]
21.46@21,6
[.85]
25,4
25,4
[1.00]
Ø12,7
[.50]
21,6
[.85]
[1.00]
Ø12.7
[.50]
14,7
[.58]
4,8
[1.19]
14,7
[.58]
MTG PADS
4,8
[.19]
MTG PADS
55,9
55,9
[2.20]
OPERATING
POINT
[2,20]
OPERATING
POINT
28,7
[1.13]
28,7
[1.13]
59,4
[2.34]
74,9
[2.95]
70,4
[2.77]
59,5
[2.34]
89,7
[3.53]
82,6
[3.25]
CONDUIT OPENING
LOCATION
29,4
[1.16]
CONDUIT OPENING
LOCATION
16,5
[.65]
29,4
41,1
[1.62]
[1.16]
25,4
[1.00]
21,3
[.84]
47,8
[1.88]
2X 5,2 [.20]
Ø MTG HOLES
39,1
[1.54]
26,4
[1.04]
2X 10-32 UNF
TAPPED FROM REAR ONLY
2X 10-32 UNF
45,3
[1.78]
TAPPED FROM REAR ONLY
44,4
[1.54]
2X 5,2 [.20] Ø MTG HOLES
9,5 [.37]
Ø C'BORE X 7,8 [.31] DEPTH
SPDT Non-plug-in (mm[in])
DPDT Non-plug-in (mm[in])
39,6
[1.56]
39,6
[1.56]
21,6
[.85]
25,4
25,4
[1.00]
[1.00]
21,6
[.85]
4,8
14,7
[.58]
MTG PADS
[0.19]
14,7
[.58]
Ø12,7
[.50]
4,8
[1.19]
Ø12,7
[.50]
55,9
[2.20]
55,9
[2.20]
OPERATING
POINT
OPERATING
POINT
MTG PADS
28,7
[1.13]
28,7
[1.13]
59,5
[2.34]
89,7
[3.53]
82,6
[3.25]
59,4
[2.34]
75,8
[2.98]
70,4
[2.77]
CONDUIT OPENING
LOCATION
29,4
[1.16]
CONDUIT OPENING
LOCATION
47,8
[1.88]
29,4
21,3
[.84]
[1.16]
20,3
[.80]
36,6
[1.44]
41,1
[1.62]
38,1
[1.50]
2X 10-32 UNF
TAPPED FROM REAR ONLY
45,3
[1.78]
2X 5,2 [.20] Ø MTG HOLES
39,0
[1.54]
44,4
2X 5,2 [.20] Ø MTG HOLES
8,0 [.32]
2X 10-32 UNF
TAPPED FROM REAR ONLY
Ø C'BORE X 7,8 [.31] DEPTH
[1.75]
sensing.honeywell.com
24
MICRO SWITCH™ Heavy-Duty Limit Switches
Figure 14. MICRO SWITCH™ HDLS LSV Series top adjustable
plunger (single pole) dimensions
Figure 15. MICRO SWITCH™ HDLS LSV Series top adjustable
plunger (double pole) dimensions
SPDT Plug-in (mm[in])
DPDT Plug-in (mm[in])
14,7
[.58]
14,7
[.58]
7,9
[.31]
21,6
[.85]
Ø 25,4
[1.00]
7,9
[.31]
Ø 25,4
[Ø1.00]
39,6
[1.56]
21,6
[.85]
59,4
17,5
[.69]
28,7
[1.13]
[2.34]
MAX OPERATING
POINT
MTG PADS
53,1
59,4
17,5
[.69]
28,7
[1.13]
[2.09]
MIN OPERATING
POINT
[2.34]
MAX OPERATING
POINT
53,1
MTG PADS
[2.09]
MIN OPERATING
POINT
59,5
[2.34]
82,6
[3.25]
89,7
[3.53]
59,4
[2.34]
70,4
[2.77]
74,9
[2.95]
CONDUIT OPENING
LOCATION
29,4
[1.16]
29,4
[1.16]
CONDUIT OPENING
LOCATION
18.8
[.74]
47,8
41,1
[1.88]
16,5
[.65]
26,4
[1.04]
[1.62]
2X 10-32 UNF
38,1
[1.50]
TAPPED FROM REAR ONLY
25,4
[1.00]
39,0
[1.54]
2X 5,2 [.20] Ø MTG HOLES
2X 5,2 [.20]
45,3
[1.78]
Ø MTG HOLES
9,5 [.37]
Ø C'BORE X 7,8 [.31] DEPTH
44,5
[1.75]
2X 10-32 UNF
TAPPED FROM REAR ONLY
SPDT Non-plug-in (mm[in])
DPDT Non-plug-in (mm[in])
14,7
[.58]
14,7
[.58]
Ø 25,4
[Ø1.00]
21,6
[.85]
7,9
[.31]
7,9
[.31]
21,6
[.85]
36,6
[1.56]
25,4
[1.00]
17,5
[.69]
28,7
59,4
MTG PADS
[1.13]
59,4
[2.34]
MAX OPERATING
POINT
17,5
[.69]
28,7
[1.13]
[2.34]
53,1
MAX OPERATING
POINT
[2.09]
MIN OPERATING
POINT
53,1
MTG PADS
[2.09]
MIN OPERATING
POINT
59,5
[2.34]
89.65
82,6
[3.25]
59,4
[2.34]
75,8
[2.98]
70,4
[2.77]
CONDUIT OPENING
LOCATION
29,4
CONDUIT OPENING
LOCATION
[1.16]
29,4
21,3
[.84]
[1.16]
47,8
[1.88]
41,1
[1.62]
38,1
[1.50]
20,3
[.80]
45,3
[1.78]
2X 10-32 UNF
TAPPED FROM REAR ONLY
36,6
[1.44]
39,0
2X 5,2 [.20]
Ø MTG HOLES
2X 5,2 [.20] Ø MTG HOLES
8,0 [.32]Ø C'BORE X 7,8 [.31] DEPTH
[1.54]
44,4
[1.75]
2X 10-32 UNF
TAPPED FROM REAR ONLY
DIMS: MM
[IN]
sensing.honeywell.com
25
HDLS Series
SIDE PLUNGERS • MICRO SWITCH™ HDLS SERIES ORDER GUIDE/RECOMMENDED LISTINGS
Plain (LSE)
Roller (LSF)
Adjustable
(LSW)
Maintained (LSG)
Heads may be positioned to accept actuation
from any of four directions, 90° apart.
Side plain
plunger
(momentary)
Side roller
plunger
(momentary)
Adjustable
side plain
plunger
Side plain plunger with
maintained contact
Description
(momentary)
Snap Action
2NO/2NC
Snap Action
1NO/1NC
3
1
4
2
3
1
4
2
7
5
8
6
0 in
0 in
0 in
2,03 mm
2,03 mm
[0.08 in]
reset
[0.08 in]
reset
0 in
1,4 mm
[0.055 in]
1,4 mm
[0.055 in]
2,54 mm
[0.10 in]
4,32 mm
[0.17 in]
trip
4,32 mm
2,54 mm
[0.10 in]
[0.17 in]
trip
6,35 mm
[0.25 in]
6,35 mm
[0.25 in]
ꢀ ꢁ
ꢀ ꢁ
7,36 mm
[0.29 in]
7,36 mm
[0.29 in]
Contact closed n
Contact open o
ꢀ ꢁ
ꢀ ꢁ
Pretravel
2,54 mm [0.10 in]
4,32 mm [0.17 in]
Single pole: 0,64 mm [0.025 in]
Double pole: 0,89 mm [0.035 in]
2,29 mm
[0.09 in]
Different. travel
Overtravel
4,83 mm [0.19 in]
2,0 mm [0.08 in]
41,0 mm to
Operating point
(nominal)
33,0 mm
[1.30 in]
44,1 mm
[1.74 in]
47,4 mm
[1.62 in to
1.87 in]
67,6 mm [1.48 in]
44,5 N
[10 lb] max.
Operating force
Op. temp range3
26,7 N [6 lb] max.
-1 °C to 93 °C
[30 °F to 200°F]
-12 °C to 93 °C [10 °F to 200°F]
(for low temp, high temp, or preleaded versions, see pags 11-12)
(for low temp, high temp, or preleaded versions,
see page 11-12)
Circuitry
Contacts Body Style2
Conduit Options
(NPT)
Silver
Gold4
Silver
Silver
Silver
Silver
Silver
Silver
Gold4
Silver
Silver
Plug-in
0.5 in
0.5 in
0.5 in
0.5 in
0.5 in
0.75 in
0.5 in
0.75 in
0.5 in
0.75 in
0.5 in
LSE1A
LSE1E
LSE5A
LSE8A
LSE3K
LSE2B
LSE2R
LSE6B
LSE6S
LSE4L
LSE7L
LSF1A
LSF1E
LSF5A
LSF8A
LSF3K
LSF2B
LSF2R
LSF6B
–
LSW1A
LSW1E
LSW5A
LSW8A
LSW3K
LSW2B
LSW2R
LSW6B
–
LSG1A
LSG1E
LSG5A
LSG8A
LSG3K
LSG2B
LSG2R
LSG6B
–
ꢀ
ꢁ
ꢂ
ꢃ
Plug-in
120 V Ind. lite1
240 V Ind. lite1
Plug-in
SPDT
Double Break
Plug-in
Non-plug-in
Plug-in
ꢄ
ꢅ
ꢆ
ꢇ
ꢀ
Plug-in
ꢁ
ꢂ
ꢃ
120 V Ind. lite1
Plug-in
Plug-in
Non-plug-in
Non-plug-in
LSF4L
LSF7L
LSW4L
LSW7L
LSG4L
LSG7L
DPDT
Double Break
1 Use at voltage indicated for light. Wired to NO circuit. Upper temperature limit for lighted units is 93 °C [200 °F]
2 Plug-in listings include base receptacle
3 Completely fluorocarbon sealed switches are preferred for use in temperatures above 93 °C [200 °F]
4 Gold-plated contacts
NOTE: Same polarity each pole.
To order a fluorocarbon sealed switch, insert the letters Y and C into the catalog listing as follows. The LSA1A limit switch is changed to a LSYAC1A limit switch.
To order a low temperature, fluorosilicone sealed switch, insert the letters Y and B into the catalog listing as follows. The LSA1A limit switch is changed to a LSYAB1A limit switch.
sensing.honeywell.com
26
MICRO SWITCH™ Heavy-Duty Limit Switches
Figure 16. MICRO SWITCH™ HDLS LSE Series side plain
plunger (single pole) dimensions
Figure 17. MICRO SWITCH™ HDLS LSE Series side plain
plunger (double pole) dimensions
SPDT Plug-in (mm[in])
DPDT Plug-in (mm[in])
14,7
[.58]
14,7
[.58]
33,0
21,6
[.85]
33,0
21,6
[.85]
[1.30]
[1.30]
OPERATING
39,6
[1.56]
OPERATING
POINT
39,6
[1.56]
POINT
20,3
[.80]
MTG PADS
20,3
[.80]
19,0
[.75]
Ø 9,4
[.37]
19,0
[.75]
MTG PADS
31,5
[1.24]
31,5
[1.24]
Ø9,4
[.37]
Ø 25,4
[1.00]
Ø25,4
[1.00]
59,5
[2.34]
89,7
[3,53]
70,4
[2.77]
59,4
[2.34]
70,4
[2.77]
74,9
[2.95]
CONDUIT OPENING
LOCATION
29,4
[1.16]
29,4
47,8
CONDUIT OPENING
LOCATION
18,8
[.74]
[1.16]
[1.88]
16,5
[.65]
25,4
[1.00]
39,1
[1.54]
41,1
[1.62]
26,4
[1.04]
2X 10-32 UNF
TAPPED FROM REAR ONLY
38,1
[1.50]
2X 5,2 [.20] Ø MTG HOLES
2X 5,2 [.20] Ø MTG HOLES
9,5 [.37]
Ø C'BORE X 7,8 [.31] DEPTH
44,5
[1.75]
2X 10-32 UNF
TAPPED FROM REAR ONLY
SPDT Non-plug-in (mm[in])
DPDT Non-plug-in (mm[in])
33,0
14,7
[.58]
14,7
[.58]
33,0
[1.30]
MTG PADS
21,6
[.85]
[1.30]
21,6
[.85]
OPERATING
POINT
OPERATING
POINT
MTG PADS
39,6
[1.56]
39,6
[1.56]
19,0
[.75]
Ø 9,4
[.37]
20,3
[.80]
19,0
[.75]
20,3
[.80]
31,5
[1.24]
31,5
[1.24]
Ø9,4
[.37]
Ø 25,4
[1.00]
Ø 25,4
[1.00]
59,4
[2.34]
59,5
[2.34]
75,8
[2.98]
70,4
[2.77]
89,7
[3.53]
82,6
[3.25]
CONDUIT OPENING
LOCATION
29,4
29,4
[1.16]
CONDUIT OPENING
LOCATION
[1.16]
20,3
[.80]
36,6
[1.44]
41,1
[1.62]
47,8
[1.88]
21,3
[.84]
2X 5,2 [.20] Ø MTG HOLES
38,1
[1.50]
39,0
[1.54]
2X 10-32 UNF
2X 10-32 UNF
TAPPED FROM REAR ONLY
TAPPED FROM REAR ONLY
44,4
[1.75]
45,3
[1.78]
2X 5,2 [.20] Ø MTG HOLES
8,0 [.32]
Ø C'BORE X 7,8 [.31] DEPTH
sensing.honeywell.com
27
HDLS Series
Figure 18. MICRO SWITCH™ HDLS LSF Series side roller
plunger (single pole) dimensions
Figure 19. MICRO SWITCH™ HDLS LSF Series side roller
plunger (double pole) dimensions
SPDT Plug-in (mm[in])
DPDT Plug-in (mm[in])
44,2
44,2
[1.74]
[1.74]
OPERATING
OPERATING
14,7
[.58]
POINT
MTG PADS
POINT
14,7
[.58]
12,7
[.50]
12.7
21,6
[.85]
MTG PADS
ROLLER
21,6
39,6
39,6
[1.56]
[.50]
ROLLER
DIAMETER
DIAMETER
[1.56]
[.85]
4,8
[.19]
4,8
[.19]
20.3
[.80]
20,3
[.80]
31,5
[1.24]
19,0
[.75]
31,5
[1.24]
19,0
[.75]
25,4
[1.00]
25,4
[1.00]
59,5
[2.34]
59,4
[2.34]
74,9
[2.95]
89,7
[3,53]
70,4
[2.77]
82,6
[3.25]
CONDUIT OPENING
LOCATION
CONDUIT OPENING
LOCATION
29,4
[1.16]
29,4
[1.16]
16,5
[.65]
47,8
[1.88]
41,1
18,8
[.74]
[1,62]
25,4
[1.00]
26,4
[1.04]
2X 10-32 UNF
TAPPED FROM REAR ONLY
2X 5,2 [.20] Ø MTG HOLES
39,1
[1.54]
38,1
[1.50]
2X 10-32 UNF
2X 5,2 [.20] Ø MTG HOLES
9,5 [.37] Ø C'BORE X 7,8 [.31] DEPTH
44,4
[1.54]
45,3
[1.78]
TAPPED FROM REAR ONLY
SPDT Non-plug-in (mm[in])
DPDT Non-plug-in (mm[in])
44,2
44,2
14,7
[.58]
[1.74]
OPERATING
POINT
[1.74]
OPERATING
POINT
21,6
[.85]
MTG PADS
39,6
[1.56]
12,7
MTG PADS
14,7
[.58]
[.50]
21,6
[.85]
4,8
[.19]
ROLLER
DIAMETER
12,7
[.50]
39,6
[1.56]
ROLLER DIAMETER
20,3
[.80]
31,5
[1.24]
4,8
[.19]
19,0
[.75]
20,3
[.80]
31,5
[1.24]
19,0
25,4
[1.00]
[.75]
n 25,4
[1.00]
59,4
[2.34]
70,4
[2.77]
75,8
[2.98]
59,5
[2.34]
89,7
[3.53]
82,6
[3.25]
CONDUIT OPENING
LOCATION
29,4
[1.16]
20,3
[.80]
41,1
CONDUIT OPENING
LOCATION
29,4
[1,62]
36,6
[1.44]
[1.16]
21,3
[.84]
2X 5,2 [.20] Ø MTG HOLES
47,8
[1.88]
39,0
[1.54]
38,1
[1.50]
2X 10-32 UNF
TAPPED FROM REAR ONLY
44,4
[1.75]
45,3
[1.78]
2X 10-32 UNF
TAPPED FROM REAR ONLY
2X 5,2 [.20] Ø MTG HOLES
8,0 [.32]
Ø C'BORE X 7,8 [.31] DEPTH
sensing.honeywell.com
28
MICRO SWITCH™ Heavy-Duty Limit Switches
Figure 21. MICRO SWITCH™ HDLS LSW Series side adjustable
plunger (double pole) dimensions
Figure 20. MICRO SWITCH™ HDLS LSW Series side adjustable
plunger (single pole) dimensions
SPDT Plug-in (mm[in])
DPDT Plug-in (mm[in])
21,6
[.85]
47,5
[1.87]
21,6
[.85]
47,5
[1.87]
39,6
[1.56]
MAX OPERATING POINT
41,1
[1.62]
MIN
OPERATING
POINT
41,1
MAX
39,6
OPERATING POINT
20,3
[.80]
[1.62]
[1.56]
MIN
20,3
[.80]
14,7
[.58]
14,7
[.58]
MTG PADS
OPERATING
POINT
19,0
[.75]
19,0
[.75]
31,4
[1.24]
MTG PADS
31,4
[1.24]
Ø 25,4
[1.00]
Ø25,4
[1.00]
7,9
[.31]
ACROSS
FLATS
7,9
59,4
[2.34]
59,4
[2.34]
74,9
[2.95]
[.31]
ACROSS
FLATS
70,4
[2.77]
89,7
[3.53]
82,6
[3.25]
29,4
CONDUIT OPENING
LOCATION
[1.16]
CONDUIT OPENING
LOCATION
29,4
[1.16]
16,5
[.65]
25,4
[1.00]
39,0
[1.54]
41,1
[1.62]
47,8
[1.88]
18,8
[.74]
26,4
[1.04]
2X 5,2 [.20]
Ø MTG HOLES
2X 10-32 UNF
TAPPED FROM REAR ONLY
38,1
[1.50]
44,5
[1.75]
2X 10-32 UNF
TAPPED FROM REAR ONLY
2X 5,2 [.20]
9,5 [.37]
Ø MTG HOLES
Ø C'BORE X 7,8 [.31] DEPTH
45,3
[1.78]
SPDT Non-plug-in (mm[in])
DPDT Non-plug-in (mm[in])
21,6
47,5
21,6
[.85]
47,5
[1.87]
39,6
[.85]
[1.87]
41,1
MAX OPERATING POINT
MAX
[1.56]
39,6
[1.56]
OPERATING POINT
[1.62]
41,1
MIN
[1.62]
14,7
[.58]
OPERATING
20,3
MIN
14,7
[.58]
POINT
[.80]
OPERATING
20,3
[.80]
POINT
MTG PADS
19,0
[.75]
MTG PADS
19,0
[.75]
31,4
[1.24]
31,4
[1.24]
Ø25,4
[1.00]
Ø 25,4
[1.00]
7,9
7,9
[.31]
ACROSS
FLATS
59,4
[2.34]
[.31]
ACROSS
FLATS
75,8
[2.98]
70,4
[2.77]
59,4
[2.34]
89,7
[3.53]
82,6
[3.25]
CONDUIT OPENING
LOCATION
29,4
[1.16]
29,4
[1.16]
CONDUIT OPENING
LOCATION
41,1
[1.62]
20,3
[.80]
36,6
[1.44]
47,8
[1.88]
21,3
[.84]
2X 5,2 [.20]
Ø MTG HOLES
39,0
[1.54]
38,1
[1.50]
2X 10-32 UNF
TAPPED FROM REAR ONLY
2X 10-32 UNF
TAPPED FROM REAR ONLY
44,4
[1.75]
45,3
[1.78]
2X 5,2 [.20] Ø MTG HOLES
8,0 [.32]
Ø C'BORE X 7,8 [.31] DEPTH
sensing.honeywell.com
29
HDLS Series
Figure 22. MICRO SWITCH™ HDLS LSG Series maintained
contact side plunger (single pole) dimensions
Figure 23. MICRO SWITCH™ HDLS LSG Series maintained
contact side plunger (double pole) dimensions
SPDT Plug-in (mm[in])
DPDT Plug-in (mm[in])
76,2
[3.00]
76,2
[3.00]
MTG PADS
14,7
[1.56]
14,7
[.58]
MTG PADS
21,6
[.85]
37,5
21,6
[0.85]
37,5
[1.48]
[1.48]
OPERATING POINT
2X Ø 9,7
[.38]
Ø 9,47
[.38]
20,32
[.80]
OPERATING POINT
20,3
[.80]
2X
n
25,4
19,0
[.75]
[1.00]
19,0
[.75]
2X Ø 25,4
[1.00]
119,1
[4.69]
59,4
[2.34]
89,7
[3.53]
82,6
[3.25]
59,4
[2.34]
74,9
[2.95]
70,4
[2.77]
CONDUIT OPENING
29,4
[1.16]
LOCATION
29,4
CONDUIT OPENING
LOCATION
[1.16]
47,8
[1.88]
18,8
[.74]
16,5
[.65]
25,4
[1.00]
39,1
41,1
[1.62]
26,4
[1.04]
2X 10-32 UNF
TAPPED FROM REAR ONLY
38,1
[1.50]
2X 5,2 [.20] Ø MTG HOLES
9,5 [.37] Ø C'BORE X 7,8 [.31] DEPTH
2X 5,2 [.20] Ø MTG HOLES
[1.54]
45,3
[1.78]
44,5
[1.75]
2X 10-32 UNF
TAPPED FROM REAR ONLY
D
SPDT Non-plug-in (mm[in])
DPDT Non-plug-in (mm[in])
76,2
[3.00]
76,2
[3.00]
MTG PADS
MTG PADS
14,7
[.58]
14,7
[1.56]
21,6
[0.85]
21,6
[.85]
37,5
37,5
[1.48]
[1.48]
Ø 9,7
[.38]
2X Ø 9,7
[.38]
OPERATING POINT
OPERATING POINT
20,3
[.80]
20,3
[.80]
2X Ø 25,4
[1.00]
25,4
[1.00]
19,0
[.75]
19,0
[.75]
101,7
[4.0]
119,1
[4.69]
75,8
[2.98]
59,4
[2.34]
59,4
[2.34]
89,7
[3.53]
70,4
[2.77]
82,6
[3.25]
20,3
[.80]
29,4
21,3
[.84]
38,1
[1.50]
29,4
[1.16]
[1.16]
36,6
[1.44]
41,1
[1.62]
47,8
[1.88]
39,0
[1.54]
CONDUIT OPENING
45,3
2X 5,2 [.20] Ø MTG HOLES
LOCATION
CONDUIT OPENING
LOCATION
2X 10-32 UNF
TAPPED FROM REAR ONLY
44,4
[1.78]
[1.75]
2X 10-32 UNF
TAPPED FROM REAR ONLY
2X 5,2 [.20] Ø MTG HOLES
8,0 [.32] Ø C'BORE X 7,8 [.31] DEPTH
sensing.honeywell.com
30
MICRO SWITCH™ Heavy-Duty Limit Switches
WOBBLES • MICRO SWITCH™ HDLS SERIES ORDER GUIDE/RECOMMENDED LISTINGS
LSJ Series
LSJ Series
LSJ Series
LSK Series
7A Actuator
7N Actuator
7M Actuator
8A-8C Actuator
Plastic rod lever
(wobble stick)
Flexible cable
lever
Spring wire lever - Cat whisker actuator for
may be formed for low operating force ap-
Description
special needs
plications
Snap Action
1NO/1NC
Snap Action
1NO/1NC
-8A**
-8C
Snap Action
1NO/1NC
Snap Action
1NO/1NC
Snap Action
1NO/1NC
3
1
4
2
3
1
4
2
3
1
4
2
3
4
2
3
1
4
2
1
0°
0°
0°
0°
8°
0°
12°
10°
16°
16°
20°
15°
20°
25°
25°
ꢀ ꢁ
Snap Action
2NO/2NC
ꢀ ꢁ
ꢀ ꢁ
ꢀ ꢁ
ꢀ ꢁ
Snap Action
2NO/2NC
Snap Action
2NO/2NC
Snap Action
2NO/2NC
Snap Action
2NO/2NC
Contact closed n
Contact open o
3
4
3
4
2
3
4
3
1
3
4
2
4
2
1
2
1
1
2
1
7
5
8
6
7
5
7
5
8
6
8
6
7
7
5
8
6
8
6
5
0°
0°
0°
0°
0°
10°
8°
15°
12°
16°
25°
16°
20°
25°
20°
ꢀ ꢁ
ꢀ ꢁ
ꢀ ꢁ
ꢀ ꢁ
ꢀ ꢁ
Lever length
from top mount-
ing hole
8A act.: 140 mm [5.5 in] SST
8C act.: 140 mm [5.5 in]
steel plated
Actuator:
140 mm [5.5 in]
Actuator:
140 mm [5.5 in] 330 mm [13 in]
Actuator:
Pretravel
25,4 mm [1.0 in] 38,0 mm [1.5 in] 102 mm [4.0 in]
2,78 Nm [10 oz] 1,95 Nm [7 oz] 1,39 Nm [5 oz]
51,0 mm [2.0 in]
Oper. force
8A: 1,39 Nm [5 oz];
8C: 1,95 Nm [7 oz]
LSJ1A-7A LSJ1A-7M LSJ1A-7N
LSK1A-
8A - Cat
whisker
LSK1A-
8C - Coil
spring
- Plastic
rod
- Spring
wire
- Flexible
actuator
Op. temp range3
-12 °C to 93 °C [10°F to 200 °F] (for low temp, high temp, or preleaded versions, see pages 11-12)
Circuitry
Contacts Body Style2
Conduit Options
(NPT)
Silver
Gold4
Silver
Silver
Silver
Silver
Silver
Silver
Silver
Plug-in
Plug-in
Plug-in
Plug-in
0.5 in
0.5 in
LSJ1A-7A
LSJ1E-7A
LSJ5A-7A
LSJ8A-7A
LSJ3K-7A
LSJ2B-7A
LSJ6B-7A
LSJ2R-7A
LSJ4L-7A
LSJ1A-7N
–
LSJ1A-7M
LSJ1E-7M
LSJ5A-7M
LSJ8A-7M
LSJ3K-7M
LSJ2B-7M
LSJ6B-7M
LSJ2R-7M
LSJ4L-7M
LSK1A-8A LSK1A-8C
LSK1E-8A LSK1E-8C
LSK5A-8A LSK5A-8C
LSK8A-8A LSK8A-8C
LSK3K-8A LSK3K-8C
LSK2B-8A LSK2B-8C
LSK6B-8A LSK6B-8C
LSK2R-8A LSK2R-8C
LSK4L-8A LSK4L-8C
ꢀ
ꢁ
ꢂ
120 V Ind. lite1
240 V Ind. lite1
0.5 in
0.5 in
LSJ5A-7N
LSJ8A-7N
LSJ3K-7N
LSJ2B-7N
LSJ6B-7N
LSJ2R-7N
LSJ4L-7N
ꢃ
SPDT
Double Break
Non-plug-in 0.5 in
Plug-in
Plug-in
Plug-in
0.75 in
0.5 in
ꢄ
ꢅ
ꢆ
ꢇ
ꢀ
ꢁ
ꢂ
ꢃ
120 V Ind. lite1
0.75 in
Non-plug-in 0.75 in
DPDT
Double Break
Silver
Non-plug-in 0.5 in
LSJ7L-7A
LSJ7L-7N
LSJ7L-7M
LSK7L-8A LSK7L-8C
1 Use at voltage indicated for light. Wired to NO circuit. Upper temperature limit for lighted units is 93°C [200 °F]
2 Plug-in listings include base receptacle
3 Completely fluorocarbon sealed switches are preferred for use in temperatures above 93 °C [200 °F]
4 Gold-plated contacts
** These cat whiskers have a 140 mm [5.5 in] long actuator. To specify a 190 mm [7.5 in] length actuator, substitute -8B for -8A.
NOTE: Same polarity each pole.
To order a fluorocarbon sealed switch, insert the letters Y and C into the catalog listing as follows. The LSA1A limit switch is changed to a LSYAC1A limit switch.
To order a low temperature, fluorosilicone sealed switch, insert the letters Y and B into the catalog listing as follows. The LSA1A limit switch is changed to a LSYAB1A limit switch.
sensing.honeywell.com
31
HDLS Series
Figure 24. MICRO SWITCH™ HDLS LSJ_ _-7A Series wobble
(single pole) dimensions
Figure 25. MICRO SWITCH™ HDLS LSJ_ _-7A Series wobble
(double pole) dimensions
23,6
39,6
[1.56]
[1.56]
21,6
[.85]
14,7
[.58]
14,7
[.58]
21,6
[.85]
Ø6,4
[.25]
Ø6,4
[.25]
SPDT Plug-in
(mm[in])
DPDT Plug-in
(mm[in])
139,7
[5.50]
139,7
[5.50]
MTG PADS
15,2
[.60]
15,2
[.60]
63,5
[2.50]
63,5
[2.50]
26,4
[1.04]
MTG PADS
26,4
[1.04]
59,5
[2.34]
82,6
[3.25]
59,4
[2.34]
70,4
[2.77]
74,9
[2.95]
89,7
[3.53]
29,4
[1.16]
CONDUIT OPENING
LOCATION
29,4
CONDUIT OPENING
LOCATION
47,8
[1.16]
16,5
[.65]
25,4
[1.00]
39,0
[1.54]
18,8
[.74]
26,4
[1.88]
41,1
[1.62]
[1.04]
2X 10-32 UNF
TAPPED FROM REAR ONLY
38,1
[1.50]
2X 5,2 [.20] Ø MTG HOLES
45,3
[1.78]
2X 5,2 [.20] Ø MTG HOLES
9,5 [.37] Ø C'BORE X 7,8 [.31] DEPTH
44,5
[1.75]
2X 10-32 UNF
TAPPED FROM REAR ONLY
SPDT Non-plug-in
(mm[in])
DPDT Non-plug-in
(mm[in])
39,6
[1.56]
39,6
[1.56]
21,6
[.85]
14,7
[.58]
Ø 6,4
[.25]
21,6
[.85]
14,7
[.58]
Ø 6,4
[.25]
139,7
[5.50]
139,7
[5.50]
MTG PADS
15,2
[.60]
63,5
[2.50]
15,2
[.60]
63,5
[2.50]
26,4
[1.04]
MTG PADS
26,4
[1.04]
59,5
[2.34]
89,7
[3.53]
82,6
[3.25]
59,4
[2.34]
75,8
[2.98]
70,4
[2.77]
29,4
CONDUIT OPENING
LOCATION
29,4
[1.16]
CONDUIT OPENING
[1.16]
LOCATION
47,8
[1.88]
20,3
41,1
[1.62]
21,3
[.84]
[.80]
36,6
[1.44]
39,0
38,1
[1.50]
2X 10-32 UNF
TAPPED FROM REAR ONLY
2X 5,2 [.20]
45,3
[1.78]
Ø MTG HOLES
[1.54]
44,4
[1.75]
2X 5,2 [.20] Ø MTG HOLES
8,0 [.32]
2X 10-32 UNF
TAPPED FROM REAR ONLY
Ø C'BORE X 7,8 [.31] DEPTH
sensing.honeywell.com
32
MICRO SWITCH™ Heavy-Duty Limit Switches
Figure 26. MICRO SWITCH™ HDLS LSJ_ _-7N Series wobble
(single pole) dimensions
Figure 27. MICRO SWITCH™ HDLS LSJ_ _-7N Series wobble
(double pole) dimensions
39,6
39,6
[1.56]
21,6
[1.56]
[.850]
14,7
21,6
[.85]
14.7
[.58]
Ø 4,75
[.58]
6,4
[.25]
[.187]
SPDT Plug-in
(mm[in])
DPDT Plug-in
(mm[in])
139.7
[5.50]
139,7
[5.50]
MTG PADS
15,2
[.60]
15,2
[.60]
63,5
[2.50]
63,5
[2.50]
MTG PADS
26,4
[1.04]
59,4
[2.34]
59,5
[2.34]
70,4
[2.77]
74,9
[2.95]
82,6
[3.25]
89,7
[3.53]
29,4
CONDUIT OPENING
LOCATION
CONDUIT OPENING
LOCATION
[1.16]
29,4
16,5
[.65]
25,4
[1.00]
39,0
[1.54]
41,1
[1.62]
[1.16]
18,8
[.74]
47,8
[1.88]
26,4
[1.04]
2X 5,2 [.20] Ø MTG HOLES
2X 10-32 UNF
TAPPED FROM REAR ONLY
38,1
[1.50]
44,5
[1.75]
2X 10-32 UNF
45,3
[1.78]
TAPPED FROM REAR ONLY
2X 5,2 [.20] Ø MTG HOLES
9,5 [.37]
Ø C'BORE X 7,8 [.31] DEPTH
SPDT Non-plug-in
(mm[in])
DPDT Non-plug-in
(mm[in])
39,6
[1.56]
39,6
[1.56]
21,6
[.850]
14,7
[.58]
14,7
[.58]
21,6
[.85]
6,4
[.25]
Ø 4.75
[1.87]
139,7
[5.5]
139,7
[5.50]
MTG PADS
63,5
[2.50]
15,2
[.60]
26,4
[1.04]
63,5
[2.50]
MTG PADS
59,4
[2.34]
89.7
[3.53]
82,6
[3.25]
59,4
[2.34]
75,8
[2.98]
70,4
[2.77]
CONDUIT OPENING
LOCATION
29,4
[1.16]
CONDUIT OPENING
LOCATION
29,4
47,8
21,3
[.84]
38,1
[1.16]
[1.88]
41,1
[1.62]
20,3
[.80]
2X 10-32 UNF
TAPPED FROM REAR ONLY
[1.50]
45,3
[1.78]
36,6
[1.44]
39,0
2X 5,2 [.20]
Ø MTG HOLES
2X 5,2 [.20] Ø MTG HOLES
8,0 [.32]
Ø C'BORE X 7,8 [.31] DEPTH
[1.54]
2X 10-32 UNF
TAPPED FROM REAR ONLY
44,4
[1.75]
sensing.honeywell.com
33
HDLS Series
Figure 28. MICRO SWITCH™ HDLS LSJ_ _-7M Series wobble
Figure 29. MICRO SWITCH™ HDLS LSJ_ _-7M
Series wobble (double pole) dimensions
n 2,0
[.08]
(single pole) dimensions
21,6
[.85]
Ø2,0
[.08]
21,6
39,6
[.85]
21,6
[.85]
[1.56]
39,6
[1.56]
21,6
[.85]
SPDT Plug-in
(mm[in])
DPDT Plug-in
(mm[in])
330,2
[13.00]
66,8
[2.63]
330,2
[13.00]
15,2
[.60]
MTG PADS
MTG PADS
66,8
[2.63]
26,4
[1.04]
15,2
[.60]
26,4
[1.04]
59,5
[2.34]
82,6
[3.25]
59,4
[2.34]
74,9
[2.95]
70,4
[2.77]
89,7
[3.53]
CONDUIT OPENING
LOCATION
29,4
[1.16]
29,4
[1.16]
CONDUIT OPENING
LOCATION
47,8
[1.88]
16,5
[.65]
41,1
[1.62]
18,8
[.74]
26,4
[1.04]
25,4
[1.00]
39,0
[1.54]
2X 10-32 UNF
TAPPED FROM REAR ONLY
38,1
[1.50]
2X 5,2 [.20] Ø MTG HOLES
44,5
[1.75]
2X 5,2 [.20] Ø MTG HOLES
45,3
[1.78]
9,5 [.37]
Ø C'BORE X 7,8 [.31] DEPTH
2X 10-32 UNF
TAPPED FROM REAR ONLY
SPDT Non-plug-in
(mm[in])
DPDT Non-plug-in
(mm[in])
2,0
[.08]
2,0
[.08]
21,6
[.85]
21,6
[.85]
21,6
[.85]
39,6
[1.56]
21,6
[.85]
39,6
[1.56]
330,2
[13.00]
330,2
[13.00]
66,8
[2.63]
66,8
[2.63]
MTG PADS
15,2
[.60]
MTG PADS
15,2
[.60]
26,4
[1.04]
26,4
[1.04]
59,5
[2.34]
89,7
[3.53]
82,6
[3.25]
59,4
[2.34]
75,8
[2.98]
70,4
[2.77]
CONDUIT OPENING
LOCATION
29,4
[1.16]
29,4
CONDUIT OPENING
20,3
[.80]
[1.16]
LOCATION
47,8
[1.88]
21,3
[.84]
38,1
41,1
[1.62]
36,6 [1.44]
39,0
[1.50]
2X 10-32 UNF
[1.54]
TAPPED FROM REAR ONLY
45,3
[1.78]
2X 5,2 [.20]
Ø MTG HOLES
44,4
[1.75]
2X 5,2 [.20] Ø MTG HOLES
2X 10-32 UNF
TAPPED FROM REAR ONLY
sensing.honeywell.com
34
MICRO SWITCH™ Heavy-Duty Limit Switches
Figure 31. MICRO SWITCH™ HDLS LSK_ _-8A Series wobble
(double pole) dimensions
Figure 30. MICRO SWITCH™ HDLS LSK_ _-8A Series wobble
(single pole) dimensions
39,6
[1.56]
1,3
[.05]
39,6
[1.56]
Ø1,3
[.05]
14,7
[.58]
21,6
[.85]
14,7
[.58]
21,6
[.85]
SPDT Plug-in
(mm[in])
DPDT Plug-in
(mm[in])
139,7
[5.50]
139,7
[5.50]
MTG PADS
15,2
[.60]
15,2
[.60]
65,0
[2.56]
65,0
[2.56]
26,4
[1.04]
MTG PADS
26,4
[1.04]
59,4
[2.34]
59,5
[2.34]
74,9
[2.95]
70,4
[2.77]
82,6
[3.25]
89,7
[3.53]
29,4
[1.16]
CONDUIT OPENING
LOCATION
CONDUIT OPENING
LOCATION
29,4
[1.16]
41,1
[1.62]
16,5
[.65]
18,8
[.74]
26,4
47,8
25,4
[1.00]
39,0
[1.88]
[1.04]
2X 5,2 [.20] Ø MTG HOLES
2X 10-32 UNF
TAPPED FROM REAR ONLY
38,1
[1.54]
[1.50]
2X 10-32 UNF
44,5
[1.75]
TAPPED FROM REAR ONLY
45,3
[1.78]
2X 5,2 [.20] Ø MTG HOLES
9,5 [.37] Ø C'BORE X 7,8 [.31] DEPTH
SPDT Non-plug-in
(mm[in])
DPDT Non-plug-in
(mm[in])
Ø1,3
[.05]
Ø1,3
[.05]
39,6
[1.56]
14,7
39,6
[1.56]
21,6
[.85]
21,6
[.85]
14,7
[.58]
[.58]
139,7
[5.50]
139,7
[5.50]
MTG PADS
15,2
[.60]
65,0
[2.56]
15,2
[.60]
65,0
[2.56]
MTG PADS
26,4
[1.04]
26,4
[1.04]
59,5
[2.34]
89,7
[3.53]
70,4
[2.77]
59,4
[2.34]
82,6
[3.25]
75,8
[2.98]
CONDUIT OPENING
LOCATION
CONDUIT OPENING
LOCATION
29,4
29,4
[1.16]
[1.16]
20,3
[.80]
21,3
[.84]
41,1
[1.62]
47,8
[1.88]
36,6
[1.44]
39,0
[1.54]
38,1
[1.50]
2X 5,2 [.20]Ø MTG HOLES
2X 10-32 UNF
TAPPED FROM REAR ONLY
45,3
[1.78]
44,4
[1.75]
2X 10-32 UNF
TAPPED FROM REAR ONLY
2X 5,2 [.20] Ø MTG HOLES
8,0 [.32] Ø C'BORE X 7,8 [.31] DEPTH
sensing.honeywell.com
35
HDLS Series
Figure 32. MICRO SWITCH™ HDLS LSK_ _-8C Series wobble
(single pole) dimensions
Figure 33. MICRO SWITCH™ HDLS LSK_ _-8C Series wobble
(double pole) dimensions
39,6
[1.56]
21,6
[.850]
39,6
[1.56]
21,6
[.850]
14,7
[.58]
14,7
[.58]
Ø 6,35
[.25]
n 6,35
[.25]
SPDT Plug-in
(mm[in])
DPDT Plug-in
(mm[in])
140
[5.50]
140
[5.50]
MTG PADS
15,2
[.60]
15,2
[.60]
MTG PADS
26,4
[1.04]
26,4
[1.04]
59,5
[2.34]
82,6
[3.25]
59,4
[2.34]
70,4
[2.77]
74,9
[2.95]
89,7
[3.53]
29,4
[1.16]
CONDUIT OPENING
LOCATION
29,4
CONDUIT OPENING
LOCATION
[1.16]
47,8
[1.88]
16,5
[.65]
18,8
[.74]
41,1
[1.62]
25,4
[1.00]
39,0
[1.54]
26,4
[1.04]
2X 10-32 UNF
TAPPED FROM REAR ONLY
38,1
[1.50]
2X 5,2 [.20] Ø MTG HOLES
44,5
[1.75]
2X 5,2 [.20] Ø MTG HOLES
9,5 [.37] Ø C'BORE X 7,8 [.31] DEPTH
45,3
[1.78]
2X 10-32 UNF
TAPPED FROM REAR ONLY
SPDT Non-plug-in
(mm[in])
DPDT Non-plug-in
(mm[in])
39,6
[1.56]
39,6
[1.56]
21,6
21,6
[.850]
[.850]
14,7
[.58]
Ø6.35
[.25]
14,7
[.58]
Ø 6,35
[.25]
140
[5.50]
140
[5.50]
MTG PADS
15,2
[.60]
15,2
[.60]
MTG PADS
26,4
[1.04]
26,4
[1.04]
59,5
[2.34]
59,4
[2.34]
75,8
[2.98]
82,6
[3.25]
70,4
[2.77]
89,7
[3.53]
CONDUIT OPENING
LOCATION
29,4
29,4
CONDUIT OPENING
LOCATION
[1.16]
[1.16]
20,3
[.80]
41,1
[1.62]
21,3
47,8
[1.88]
[.84]
36,6
[1.44]
39,0
[1.54]
38,1
[1.50]
2X 5,2 [.20]
Ø MTG HOLES
45.3
[1.78]
2X 10-32 UNF
TAPPED FROM REAR ONLY
2X 10-32 UNF
44,4
[1.75]
TAPPED FROM REAR ONLY
2X 5,2 [.20] Ø MTG HOLES
8,0 [.32]
Ø C'BORE X 7,8 [.31] DEPTH
sensing.honeywell.com
36
MICRO SWITCH™ Heavy-Duty Limit Switches
SPECIAL APPLICATIONS
HIGH CAPACITY LIMIT SWITCH
Features
ꢄ
ꢅ
ꢆ
ꢇ
ꢀ
ꢁ
ꢂ
ꢃ
•
•
•
•
•
High dc current ratings
20 A rating at 120 Vac (single pole)
Plug-in or non-plug in
ꢀ
ꢁ
ꢂ
ꢃ
Positive retention lever arm
High resistance to seismic shock
SPDT
Double Break
DPDT
Double Break
This series has a wide gap contact block
that handles a higher make/break dc load. In
addition, a special lever arm has a serrated
shaft hole and a cap screw with locking
nut for attaching the lever to the rotary shaft. This assures a firm
grip on the operating shaft and positive retention of the lever
adjustment.
Single Pole
Double Pole
Voltage
Resistive Inductive Resistive Inductive
Load
2.0 A
0.7 A
20 A
15 A
10 A
5 A
Load
1.0 A
0.4 A
20 A
15 A
10 A
5 A
Load
1.0 A
0.4 A
10 A
7.5 A
5 A
Load
0.4 A
0.2 A
10 A
7.5 A
5 A
125 Vdc
250 Vdc
120 Vac
240 Vac
480 Vac
600 Vac
The need for precise operation, coupled with challenging
environmental conditions places rigid demands on any control.
Honeywell’s products are intended to satisfy these demands with
its high capacity HDLS, designed to perform reliably under these
conditions.
2.5 A
2.5 A
Maximum operating rate - 15 operations per minute.
NOTE: Same polarity each pole.
Listings
LSQ051
Double pole, non-plug-in,
0.75 in conduit
0°
LSQ052
Double pole, plug-in, 0.75 in
conduit
9°
17°
75° ꢀ ꢁ
LSQ053
LSQ054
Single pole, non-plug-in, 0.5
in conduit
0°
9°
Single pole, plug-in, 0.5 in
conduit
17°
75° ꢀ ꢁ
LSZ616
Replacement lever for above listings
Pretravel
Diff. travel
Overtravel
17° max.
8° max.
58° min.
Oper. torque 0,45 Nm [4 in-lb] max.
Action CW and CCW (spring return)
sensing.honeywell.com
37
HDLS Series
SPECIAL APPLICATIONS
GRAVITY RETURN SIDE ROTARY SWITCHES
(LSS)
EXTRA LOW TORQUE SIDE ROTARY SWITCHES
(LST)
LSS1H gravity-return, side-rotary switches have no return spring
mechanism. The weight of the actuating lever must provide the
force to restore it to the free position. The 5 in-oz. max. operating
torque is useful in conveyor applications since it enables opera-
tion by small or lightweight objects. Because the head is unsealed,
the LSS1H is classified as NEMA 1. However, the switch cavity is
sealed to protect the switch contacts.
LST1H extra-low torque, side-rotary switches have a low force re-
turn spring and a maximim operation torque of 12 in-oz. It is rated
as NEMA 1 due to an unsealed head. The switch cavity is sealed
to protect the switch contacts.
LST1H
0°
Description
Circuitry
Extra-low torque side rotary
SPDT, double break
Silver
10°
15°
LSS1H
Contacts
Description
Gravity-return side
rotary
Sealing
NEMA 1
Electrical rating
Body style
(B) NEMA B600
Plug-in
Circuitry
SPDT, double break
Silver
Contacts
Conduit (NPT)
Pretravel
0.5 in
Sealing
NEMA 1
15° max.
Electrical rating
Body style
(B) NEMA B600
Plug-in
75°
Differential travel
Overtravel
5° max.
ꢀ ꢁ
60’ min.
Conduit (NPT)
Differential travel
Total travel (no stop)*
Operating torque
0.5 in
Total travel
Operating torque
75° nom.
12° max.
360°
0,085 Nm [12 in-oz] max.
NOTE: Same polarity each pole.
0,035 Nm [5 in-oz]
max.
* Switch has approximately 180° dwell of the
normally closed and normally open switch contacts.
NOTE: Same polarity each pole.
sensing.honeywell.com
38
MICRO SWITCH™ Heavy-Duty Limit Switches
This datasheet supports the following MICRO SWITCH™ HDLS Series Heavy-Duty Limit Switches.
LS2A4K
LS4K1A-8A
LS4K1A-8C
LS4L6C
LS4M2D
LS4N1A
LS4N2B
LS4P1A
LS4W1A
LS4YAC1A
LS4YDC1E
LS4YEC1A
LS4YJC1A-7N
LSA1A
LSA3K-1N
LSA3K-2A
LSA3K-2B
LSA3K-2C
LSA3K-2D
LSA3K-2J
LSA3K3
LSB2R
LSB3K
LSB3K-1B
LSB3K-1D
LSB3K-2C
LSB4L
LSB5A
LSB5A-2D
LSB6B
LSB6B-4N
LSB7L
LSB7L-1B
LSB9A
LSC1A
LSC1E
LSC2B
LSC2C
LSC3K
LSC3KC
LSC4L
LSC5A
LSC6B
LSC7L
LSC8A
LSD1A
LSD1A6
LSD1E
LSD1F
LSD2B
LSD2F
LSD3K
LSD3K6
LSD4L
LSD5A
LSD5A7
LSD6B
LSD7L
LSD8A
LSD9A
LSE1A
LSG1E
LSG2B
LSG3K
LSG4L
LSG5A
LSG6B
LSG7L
LSG9A
LSH1A
LSH1A-1B
LSH1A2
LSH1A-2B
LSH1A-2D
LSH1AB
LSH1E
LSH1E-1A
LSH2B
LSH2B-1B
LSH2B-2D
LSH3K
LSK6B-8C
LSK7L-8A
LSK7L-8B
LSK7L-8C
LSK8A-8A
LSK8A-8B
LSK8A-8C
LSK9A-8C
LSL2C
LSL2C-2D
LSL2G
LSL4M
LSL4M4
LSL6C
LSL6C-4N
LSL7M
LSL7M-1P
LSM2D
LSM2D-1A
LSM2D-1B
LSM2D-1D
LSM2D-2D
LSM2D-2J
LSM2DM
LSM2H
LSM2U
LSM4N
LSM4N-1A
LSM4N-1B
LSM4N-2B
LSM6D
LSP1A-2A
LSP1A-2D
LSP1A4
LSP1A-4M
LSP1A5-1C
LSP1AB
LSP1E
LSP1E-1A
LSP1F
LSP2B
LSP2B-1B
LSP3K
LSP3K-1B
LSP3K-1D
LSP3K3
LSP4L
LSP4L3
LSP4L-4N
LSP4L5
LSP5A
LSP5A7
LSP6B
LSP7L
LSP7L-2D
LSP7L3
LSP7S3
LSP8A
LS-PA5A4
LSPA5D2
LSPA5D4
LSQ037
LSQ038
LSQ051
LSQ052
LS2A4KC
LS2A4KPC
LS2A4KY-FP
LS2A4L
LS2A4L-RS
LS2A4LX-FP
LS2C4L
LS2D3N
LS2D4K
LS2D4KC
LS2D4L
LS2D4LM
LS2D4L-RS
LS2E4K
LS2E4L
LS2F4K
LS2F4L
LS2F4L5
LS2H3K
LS2H4K
LS2H4L
LS2H4L3
LS2M4N
LS2M4N3
LS2M4NM
LS2N3K
LS2YAB4K
LS2YAB4L
LS2YAB4L5M
LS2YCB4K
LS2YDB4K
LS2YEB4K
LS2YMB4N
LS2Z1A
LSA3K4
LSA3K4-1A
LSA3K4-1B
LSA3K4-1D
LSA3K-4M
LSA3K-4N
LSA3K-4R
LSA3K-5C
LSA3KA
LSA3KC
LSA3N
LSA3N14-2J
LSA4L
LSA4L1
LSA4L-1A
LSA4L-1B
LSA4L-1D
LSA4L23
LSA4L-2A
LSA4L-2B
LSA4L3-1D
LSA4L4
LSA1A1
LSA1A1-1A
LSA1A1-1B
LSA1A1-2J
LSA1A13
LSA1A14
LSA1A15
LSA1A-1A
LSA1A-1B
LSA1A-1C
LSA1A-1D
LSA1A-1F
LSA1A-1L
LSA1A-1M
LSA1A1S
LSA1A2
LSA1A2-2J
LSA1A-2A
LSA1A-2B
LSA1A-2C
LSA1A-2D
LSA1A-2E
LSA1A-2J
LSA1A-2K
LSA1A3
LSH4L
LSH4L13
LSH4L-1B
LSH4L3
LSH5A
LSH5A-1L
LSH5A-4N
LSH6B
LSH6B-1B
LSH7L
LSH9A
LSH9A7
LSA4L4-1D
LSA4S
LSA5A
LSM6D-1B
LSM6D-1D
LSM6D-1F
LSM6D-1P
LSM6D-2A
LSM6D-2B
LSM6D3
LSM6D4
LSM6D4-5D
LSM6D-5B
LSM6U
LSA5A15
LSA5A-1A
LSA5A-1B
LSA5A-1C
LSA5A-1D
LSA5A25
LSA5A7B
LSA5AB-1A
LSA5AB-1B
LSA5ADD
LSA6B
LSJ1A
LSJ1A-1N
LSJ1A-7A
LSJ1A-7M
LSJ1A-7N
LSJ1AB-7N
LSJ1AC-7M
LSJ1AC-7N
LSJ1ADD-7A
LSJ1E-7A
LSJ1E-7M
LSJ2B-7A
LSJ2B-7M
LSJ2B-7N
LSJ3K
LSJ3K-7A
LSJ3K-7M
LSJ3K-7N
LSJ4L-7A
LSJ4L-7M
LSJ5A-7A
LSJ5A-7M
LSJ5A-7N
LSJ6B
LSJ6B-7A
LSJ6B-7M
LSJ6B-7N
LSJ7L-7A
LSJ7L-7M
LSJ7L-7N
LSJ8A-7A
LSK1A
LSK1A-8A
LSK1A-8B
LSK1A-8C
LSK1E-8A
LSK1E-8C
LSK1J-8C
LSK2B-8A
LSK2B-8C
LSK3K
LSQ053
LSQ054
LSQ081
LSQ117-QC
LSQ2A4L352
LSQ2H4KP227
LSQ2L4M321
LSQ300
LS2Z1AB
LS2Z1D
LS2Z1E
LS2Z1F
LS2Z1H
LSA1A3-1B
LSA1A3-5C
LSA1A4
LS2Z1N
LSE1A3
LSE1A4
LSE1A5
LSE1ADD
LSE1E
LSE1E4
LSE2B
LSE3K
LSE4L
LS2Z51A
LS2Z51B
LS2Z51D
LS2Z51R
LS2Z52A
LS2Z52B
LS2Z52D
LS2Z54N
LS2Z54N-C
LS2Z616
LS30218
LS3A1A
LS3A2B
LS3A3K
LS3A3K-7AA
LS3A3K-7AA-RS
LS3D3K
LS3F1A8
LS3F1E
LSA1A-4
LSA1A-4M
LSA1A-4N
LSA1A-4R
LSA1A5
LSA1A-9B
LSA1AA
LSA1AB
LSA1AB-1B
LSA1AC
LSA1AC-2C
LSA1AC-4M
LSA1AH12
LSA1E
LSA1E-1B
LSA1E-2A
LSA1E-2D
LSA1F
LSM7N
LSQ310-20
LSQ3A3K281
LSQ3A3K281-VL363
LSQ3N2D3357
LSQA1A278
LSQA1A313
LSQA1A341
LSQA1A366
LSQA3K129
LSQA3K163
LSQA3K-2C-SCO
LSQA3K363
LSQA6B134
LSQA6B314
LSQD3K-SCO
LSQE3K318
LSQH1A322
LSQJ1A213
LSQL4M292
LSQL7M122
LSQL7M123
LSQM4N293
LSQM6D315
LSQMC7N147
LSQMC7N148
LSQMC7N311
LSQR1A316
LSQUB1A323
LSQUB7N191
LSQUC3K170
LSQUC5K272
LSQYAB1AC365
LSQYAB4L347
LSQYAB4LX249
LSQYDB3K356
LSQYFB1A344
LSQYFB3K125-QC
LSQYFB3K345
LSQYFC3K223
LSQYJB1A346
LSQYMC7N361
LSQYPB3KP364
LSA6B1
LSM7N-1A
LSM7N-1B
LSM7N-1D
LSM7N3
LSM7N-4
LSM7U
LSA6B-1A
LSA6B-1B
LSA6B-1D
LSA6B-1F
LSA6B-1L
LSA6B-2B
LSA6B-2C
LSA6B-2D
LSA6B-3D
LSA6B4-2C
LSA6R
LSE5A
LSM7U-2D
LSN1A
LSE6B
LSE6B5
LSE6C5
LSE6S
LSE7L
LSE7L3
LSE9A
LSN1A-1B
LSN1A-2C
LSN1A-3A
LSN1A-3B
LSN1A-3D
LSN1A-3P
LSN1A-3S
LSN1E
LSN1E-1A
LSN1F
LSN1F-1B
LSN2B
LSN3K
LSN3N
LSN4L
LSN4L-2D
LSN4L-3B
LSN4L-3D
LSN5A
LSA6S
LSA7L
LSA7L-1A
LSA7L-1B
LSA7L-1C
LSA7L-1D
LSA7L-2D
LSA7L-2J
LSA7L3-1B
LSA7L4
LSA7L-4N
LSA7L-4R
LSA7L-5C
LSA8A
LSF1A
LSF1A3
LSF1A4
LSF1A5
LSF1A8
LSF1E
LSF1F
LSF2B
LSA2B
LS3M2D
LSA2B15-5D
LSA2B-1A
LSA2B-1B
LSA2B-1C
LSA2B-1D
LSA2B25-5D
LSA2B-2A
LSA2B-2B
LSA2B-2C
LSA2B-2D
LSA2B3-5C
LSA2B4
LSA2B5
LSA2F
LSA2R
LSA2S
LSA3K
LSA3K1
LS3YDC1A
LS3YDC1E
LS3YVC1A
LS3YVC1E
LS4A1A
LS4A1E
LS4A1J
LS4A2B
LS4A3K
LS4A3K-1B
LS4A3K-2B
LS4A3K-7AA
LS4C1A
LS4C3K
LS4D1A
LS4D3K
LS4F1A
LS4F2B
LS4H1A
LS4J1A-7A
LS4J1A-7M
LS4J1A-7N
LS4J2B-7N
LSF2C
LSF3K
LSF3K3
LSF3K4
LSF3K5
LSF3K8
LSF3N
LSF4L
LSA8A7
LSA9A
LSN6B
LSA9A-1A
LSA9A23
LSA9A-2L
LSA9ADD
LSA9EDD
LSB1A
LSN6B-3B
LSN6B-3D
LSN7L
LSN8A
LSN8A37
LSN9A
LSN9EDD
LSP1A
LSP1A-1B
LSP1A-1C
LSP1A-1D
LSP1A2
LSK3K-8A
LSK3K-8B
LSK3K-8C
LSK4L-8A
LSK4L-8C
LSK5A-8A
LSK5A-8B
LSK5A-8C
LSK6B
LSF5A
LSF6B
LSF6B3
LSF7L
LSF7L3
LSF7L4
LSF7L5
LSF7L8
LSF8A
LSB1A1
LSA3K1-1A
LSA3K1-1B
LSA3K-1A
LSA3K-1B
LSA3K1C-1C
LSA3K-1D
LSB1A-1B
LSB1A-4M
LSB1A-4N
LSB1AC
LSB1E
LSB2B
LSK6B-8A
LSK6B-8B
LSF9A
LSG1A
LSP1A25
sensing.honeywell.com
39
HDLS Series
LSQYUB1A334
LSQYUB3K336
LSQYUB3K339
LSQYUB3KC319
LSQZ52J
LSQZ55C259
LSR1A
LSR1A-1A
LSR1A-1B
LSR1A-2K
LSR1A-4N
LSR1A-5C
LSR1ADD
LSR1E
LSR2B
LSR2B-4N
LSR3K
LSR3K1
LSR3K-4M
LSR4L
LSYAB3K
LSYAB3K1
LSZ56L
LSYCB3KQ-FP
LSYCB4L
LSYCB4SX-FP
LSYCB6B
LSYCB9A7
LSYCC1A
LSYCC1ADD
LSYCC1ADD-C
LSYCC1AE
LSYCC3K
LSYCC3KP-FP
LSYCC3KQ-FP
LSYCC3KY-FP
LSYCC4L
LSYCC4LX-FP
LSYCC5A
LSYCC5KP-FP
LSYCC5KY-FP
LSYCC6B
LSYCC7L
LSYDB1A
LSYDB2B
LSYDB3K
LSYDB4L
LSYDB6B
LSYDB7L
LSYDC1A
LSYDC1ADD
LSYDC1ADD-C
LSYDC1AE
LSYDC3K
LSYDC3KPC-FP
LSYDC3KP-FP
LSYDC3KQ-FP
LSYDC3KY-FP
LSYDC4LX-FP
LSYDC5A
LSYDC5AC
LSYDC5AE
LSYDC5KP-FP
LSYDC5KQ-FP
LSYDC5KY-FP
LSYDC6B
LSYHC7L
LSYVB4L
LSYVC1A
LSYVC3KP-FP
LSYVC3KQ-FP
LSYVC3KY-FP
LSYVC7L
LSYWB1A
LSYWB3K
LSYWB3KQ-FP
LSYWC1A
LSYWC1ADD
LSYWC1F
LSYWC3KP-FP
LSYWC3KY-FP
LSYWC5KQ-FP
LSYWC6B
LSYWC7L
LSZ51
LSYMC7NR-FP
LSYNB1A
LSYNB1AC
LSYNB2B
LSYJB1A-7A
LSYJB1A-7M
LSYJB1A-7N
LSYJB1E-7A
LSYJB1E-7M
LSYJB1J-7A
LSYJB2B-7M
LSYJB3K-7A
LSYJB3K-7M
LSYJB3K-7N
LSYJB3KQ-7MFP
LSYJB4L-7M
LSYJB4LX-7AFP
LSYJB5A-7A
LSYJB6B-7M
LSYJC1A-7A
LSYJC1A-7M
LSYJC1A-7N
LSYJC1AC-7M
LSYJC1ADD-7A
LSYJC1ADD-7N
LSYJC3K-7A
LSYJC3K-7N
LSYJC3KP-7AFP
LSYJC3KP-7MFP
LSYJC3KQ-7AFP
LSYJC3KQ-7MFP
LSYJC3KQ-7NFP
LSYJC5KQ-7MFP
LSYJC6B-7M
LSYJC7LR-7MFP
LSYJC7LR-7NFP
LSYKB1A-8A
LSYKB1A-8C
LSYKB3K-8C
LSYKB4L-8C
LSYKB4LM-8C
LSYKB6B-8C
LSYKB7L-8C
LSYKC1A-8A
LSYKC1A-8C
LSYKC1AC-8A
LSYKC1AC-8C
LSYKC1ADD-8C
LSYKC1ADD-8C-C
LSYKC1E-8C
LSYKC3K-8C
LSYKC3KP-8AFP
LSYKC3KQ-8CFP
LSYKC4L-8C
LSYKC5KQ-8BFP
LSYKC7LR-8AFP
LSYLB4M
LSZ56M
LSZ56N
LSZ581B
LSZ59
LSZ59A
LSZ59AC
LSZ59B
LSZ59C
LSZ59D
LSZ59L
LSZ60A
LSZ60B
LSYAB3K-1B
LSYAB3K2-5C
LSYAB3K-2J
LSYAB3K-5D
LSYAB3KE-FP
LSYAB3KPC-FP
LSYAB3KP-FP
LSYAB3KQ-FP
LSYAB3N
LSYNB3K
LSYNB3K-3S
LSYNB3K5-3S
LSYNB3KP-FP
LSYNB3KQ-3BFP
LSYNB4L
LSYNB4L-3P
LSYNB4LX-FP
LSYNB5A
LSYNB7L
LSYNC1A
LSYNC1ADD
LSYNC1E
LSYNC3KPC-FP
LSYNC3KP-FP
LSYNC3KQ-FP
LSYNC4LX-FP
LSYNC5KQ-FP
LSYPB1A
LSYPB1AC
LSYPB1E
LSYPB2B
LSYPB2B-4N
LSYPB3K
LSYPB3K3
LSYPB3K4
LSYPB3KP-FP
LSYPB4L
LSYPB4L-1B
LSYPB4L3
LSYPB4L-4N
LSYPB6B
LSYPB7L
LSYPB7L3
LSYPC1A
LSYPC1J
LSYPC2B
LSYPC2B-1B
LSYPC3K
LSYPC3KP-FP
LSYPC3KQ-FP
LSYPC3KY-FP
LSYPC4LX-FP
LSYRB1A
LSYRB3KP-FP
LSYRB6B
LSYRC1A
LSYRC1A3
LSYRC1ADD
LSYRC1ADD-C
LSYRC1E3
LSYRC2B
LSYRC3KP-FP
LSYRC4L
LSYAB3N-4N
LSYAB4L
LSYAB4L-1B
LSYAB4L24
LSYAB4L24-1
LSYAB4L-2A
LSYAB4L360
LSYAB4L4
LSYAB4LX-FP
LSYAB4S
LSYAB5A
LSZ61
LSZ616
LSZ617
LSZ618
LSZ65AA
LSZ65AB
LSZ65AF
LSZ65BA
LSZ65CA
LSZ65CB
LSZ65CD
LSZ65DA
LSZ65DB
LSZ65DC
LSZ65DD
LSZ65EA
LSZ65EB
LSZ65ED
LSZ65EE
LSZ65FA
LSZ65FB
LSZ65FD
LSZ65FF
LSZ65GA
LSZ65GB
LSZ65HA
LSZ65HB
LSZ65HC
LSZ65HD
LSZ65HE
LSZ65JA
LSZ65JB
LSZ65JD
LSZ65JE
LSZ65JF
LSZ65KA
LSZ65KB
LSZ65LA
LSZ65LB
LSZ67AA
LSZ68
LSZ51A
LSZ51B
LSR5A
LSR6B
LSZ51B-C
LSZ51C
LSZ51CA
LSZ51D
LSZ51D-C
LSZ51F
LSZ51G
LSZ51J
LSZ51L
LSZ51M
LSZ51N
LSZ51P
LSZ51R
LSZ51T
LSZ51U
LSZ51W
LSZ51Y
LSZ52
LSZ52A
LSZ52B
LSZ52C
LSZ52D
LSZ52E
LSZ52J
LSZ52K
LSZ52L
LSZ52M
LSZ52N
LSZ52R
LSZ52W
LSZ52Y
LSZ53
LSZ53A
LSZ53B
LSZ53D
LSZ53E
LSZ53M
LSZ53P
LSZ53S
LSZ53U
LSZ53W
LSZ54
LSZ54M
LSZ54N
LSZ54NA
LSZ54N-C
LSZ54P
LSZ54R
LSZ54SM
LSZ54T
LSZ54V
LSZ54W
LSZ55
LSZ55A
LSZ55B
LSZ55C
LSZ55D
LSZ55E
LSZ55F
LSZ55K
LSZ55W
LSZ55Y
LSZ56
LSZ56A
LSZ56B
LSZ56C
LSZ56D
LSZ56E
LSZ56J
LSZ56K
LSR6B-2D
LSR6B-2L
LSR6B-4M
LSR7L
LSR7L-2D
LSR9A
LSYAB6B
LSYAB6B-1B
LSYAB6B-2D
LSYAB7L
LSYAB7L-1A
LSYAB7L-2B
LSYAC1A
LSYAC1A1-1D
LSYAC1A-1B
LSYAC1A2C
LSYAC1A-2D
LSYAC1A-4N
LSYAC1A-C
LSYAC1ADD
LSYAC1ADD-1B
LSYAC1ADD-4N
LSYAC1ADD-C
LSYAC1AH
LSYAC1E
LSYAC1EC
LSYAC2B
LSYAC2R
LSYAC2S
LSYAC3K
LSYAC3KC-FP
LSYAC3KDD-FP
LSYAC3KP
LSS1H
LSS1H-4N
LSS1HDD
LSS1HDD-C
LST1H
LST1H-1C
LSU1A
LSU1A-1
LSU1A-1B
LSU1A-1D
LSU1A-2B
LSU1A-2D
LSU1A4
LSU1A-4R
LSU1E
LSU2B
LSU3K
LSU3K1
LSU3K-1A
LSU3K-2J
LSU4L
LSU5A
LSU6B
LSU7L
LSU8A
LSU9A
LSV1A
LSV1E
LSV2B
LSV3K
LSV4L
LSV5A
LSV6B
LSV7L
LSW1A
LSW1A4
LSW1A5
LSW1AC
LSW1E
LSW2B
LSW3K
LSW3N
LSW4L
LSW5A
LSW6B
LSYDC7L
LSYDC9KP-FP
LSYEB4L5
LSYEC1A
LSYEC1ADD
LSYEC1ADD-C
LSYEC1AE
LSYAC3KPB-FP
LSYAC3KPC-FP
LSYAC3KP-FP
LSYAC3KQ-1BFP
LSYAC3KQ-FP
LSYAC3KQ-FP-C
LSYAC3KY-FP
LSYAC3N
LSYEC3K
LSYEC3KP-FP
LSYEC3KQ-FP
LSYEC3KY-FP
LSYEC4LX-FP
LSYEC5KP-FP
LSYEC5KY-FP
LSYEC6B
LSYFB1A
LSYFB3K
LSYFB3K3
LSYFB3K4
LSYLB6C
LSYLB6T
LSYLB7M
LSYLB7MR-FP
LSYLB7T
LSYLC2C
LSYLC4M
LSYLC4MX-FP
LSYLC6C
LSYMB2D
LSZ686
LSZ69CA
LSZ69DA
LSYAC4L
LSYAC4L4
LSYRC4LX-FP
LSYRC5KP-FP
LSYRC5KQ-FP
LSYRC9A
LSYAC4LAA-FP
LSYAC4LX-FP
LSYAC5A
LSYAC5KPC-FP
LSYAC5KP-FP
LSYAC5KQ-FP
LSYAC5KY-FP
LSYAC6B
LSYAC6B-1A
LSYAC6B-1B
LSYAC6B-2L
LSYAC6B-4N
LSYAC7L
LSYAC7LR-FP
LSYAC9A
LSYAC9AB
LSYBB1A
LSYBB2B
LSYBB3K
LSYBB3KP-FP
LSYBB4L
LSYBB5KP-FP
LSYBC1A
LSYFB4L
LSYUB1A
LSYFB4LM
LSYFB4LX-FP
LSYFB7L
LSYUB1A13
LSYUB1A13-2A
LSYUB1A13-2B
LSYUB1A23
LSYUB1A23-2D
LSYUB1A3
LSYUB2B
LSYUB3K
LSYUB6B
LSYUB6B13
LSYUB6B3
LSYUB9AC
LSYUC1A
LSYUC1A-1B
LSYUC1ADD
LSYUC2B
LSYUC3KP-FP
LSYUC3KQ-FP
LSYUC3KY-FP
LSYUC4LX-FP
LSYUC5KQ-FP
LSYUC6B
LSYMB2D3
LSYMB4N
LSYFC1A
LSYMB4N-1A
LSYMB4N-2K
LSYMB4N3X-FP
LSYMB4NX-FP
LSYMB6D
LSYMB6D-2D
LSYMB6U
LSYFC1ADD
LSYFC1ADD-C
LSYFC1AE
LSYFC3K
LSYFC3K48P-FP
LSYFC3KP-FP
LSYFC3KQ-FP
LSYFC3KY-FP
LSYFC5KQ-FP
LSYFC6B
LSYFC7L
LSYFC7L3
LSYFC7L4
LSYGB1A
LSYGB1E
LSYGC3KP-FP
LSYHB1A
LSYHC1A
LSYHC3K
LSYHC3KA
LSYHC3KP-FP
LSYHC4L
LSW7L
LSYMB7N
LSYAB1A
LSYAB1A-1B
LSYAB1A-2A
LSYAB1A3
LSYAB1A-4N
LSYAB1AB
LSYAB1AC
LSYAB1E
LSYAB1E-2B
LSYAB1E4-2B
LSYAB1EP-1A
LSYAB1F
LSYAB2B
LSYAB2B3
LSYAB2F
LSYAB2S
LSYMB7N-1C
LSYMB7N-1D
LSYMB7N3
LSYMB7N3-1A
LSYMB7U
LSYMC2D-1D
LSYMC4N
LSYMC4NX-1BFP
LSYMC4NXB-FP
LSYMC4NX-FP
LSYMC6D
LSYBC3K
LSYBC3KP-FP
LSYBC3KQ-FP
LSYBC5A
LSYBC5KP-FP
LSYBC9A-1D
LSYCB1A
LSYMC6D-1B
LSYMC6DF
LSYMC6DF-1B
LSYMC7N
LSYUC9ADD
LSYVB1A
LSYVB2B
LSYVB3K
LSYCB1E
LSYHC4LX-FP
LSYMC7NDE-FP
sensing.honeywell.com
40
MICRO SWITCH™ Heavy-Duty Limit Switches
ALSO AVAILABLE
Fully potted MICRO SWITCH™ HDLS heavy-duty limit switches provide an extra degree of protection in
harsh environments by sealing the basic switch cavity with epoxy. These switches are the same as the non- plug-in
HDLS except that the entire switch cavity is filled with epoxy in addition to the conduit entrance. The fully potted
HDLS switches are pre-leaded, with either cable or connectors.
•
Excellent sealing capability for harsh-duty food and beverage wash downs and severe machine tool environ-
ments
•
•
•
•
•
•
Diaphragm sealing
12 inch STOOW-A cable (other lengths available) or connector version
Cable versions: NEMA 1, 6, 6P, 12
Connector versions: NEMA 1, 6, 6P, 12, 13
All fluorocarbon seals (low temperature fluorosilicone seals available)
UL, CSA, CE, CCC
MICRO SWITCH™ HDLS switches are also available in all stainless-steel versions. Designed for use in
highly corrosive environments, such as petrochemical plants, food processing plants, shipboard, and dockside lo-
cations. The type 316 cast stainless steel body is designed to minimize crevices where food particles could become
trapped in water. The actuator, operating head, and screws are also stainless steel. All seals are fluorocarbon to
provide excellent chemical resistance and to withstand operating temperatures up to 121 °C [250 °F] and pressur-
ized steam cleaning. Pre-leaded and epoxy-filled versions also available.
•
•
•
•
•
Corrosion-resistant stainless steel non-plug in body, head, and rotary shaft
Stainless steel levers
Fluorocarbon seals (low temperature fluorosilicone seals available)
NEMA 1, 3, 3R, 4, 4X, 6, 6P, and 13
UL, CSA, CE, CCC
To learn more about Honeywell’s HDLS products, call +1-815-235-6847 or 1-800-537-6945.
sensing.honeywell.com
41
HDLS Series
ADDITIONAL INFORMATION
WARNING
PERSONAL INJURY
The following associated literature is available on the Web at
sensing.honeywell.com:
DO NOT USE these products as safety or emergency stop
devices or in any other application where failure of the product
could result in personal injury.
• Product installation instructions
• Product range guide
• Product nomenclature tree
Failure to comply with these instructions could result in
death or serious injury.
• Product application-specific information
– Application Note: Sensors and Switches in Oil Rig Applications
– Application Note: Sensors and Switches for Industrial Manual
Process Valves
WARNING
MISUSE OF DOCUMENTATION
– Application Note: Sensors and Switches Used in Valve
Actuators and Valve Positioners
•
The information presented in this product sheet is for
reference only. Do not use this document as a product
installation guide.
•
Complete installation, operation, and maintenance
information is provided in the instructions supplied with
each product.
Failure to comply with these instructions could result in
death or serious injury.
WARRANTY/REMEDY
Honeywell warrants goods of its manufacture as being free of
defective materials and faulty workmanship. Honeywell’s standard
product warranty applies unless agreed to otherwise by Honeywell
in writing; please refer to your order acknowledgement or consult
your local sales office for specific warranty details. If warranted
goods are returned to Honeywell during the period of coverage,
Honeywell will repair or replace, at its option, without charge those
items it finds defective. The foregoing is buyer’s sole remedy
and is in lieu of all other warranties, expressed or implied,
including those of merchantability and fitness for a particu-
lar purpose. In no event shall Honeywell be liable for conse-
quential, special, or indirect damages.
While we provide application assistance personally, through our
literature and the Honeywell website, it is up to the customer to
determine the suitability of the product in the application.
Specifications may change without notice. The information we
supply is believed to be accurate and reliable as of this printing.
However, we assume no responsibility for its use.
sensing.honeywell.com
42
Find out more
Honeywell serves its customers
through a worldwide network
of sales offices, representatives
and distributors. For application
assistance, current specifications,
pricing or name of the nearest
Authorized Distributor, contact
your local sales office.
To learn more about Honeywell’s
sensing and control products,
call +1-815-235-6847 or
1-800-537-6945,
visit sensing.honeywell.com, or
e-mail inquiries to
info.sc@honeywell.com
Sensing and Control
Honeywell
1985 Douglas Drive North
Golden Valley, MN 55422
honeywell.com
002345-4-EN IL50 GLO
April 2014
Copyright © 2014 Honeywell International Inc. All rights reserved.
相关型号:
LSYBC1A
Snap Acting/Limit Switch, SPDT, Momentary, 240VDC, Screw Terminal, Top Rotary Actuator, Panel Mount
HONEYWELL
LSYBC5A
Snap Acting/Limit Switch, SPDT, Momentary, 240VDC, Screw Terminal, Top Rotary Actuator, Panel Mount
HONEYWELL
LSYBC5KP-FP
Snap Acting/Limit Switch, SPDT, Momentary, 240VDC, Screw Terminal, Top Rotary Actuator, Panel Mount,
HONEYWELL
LSYBC9A-1D
Snap Acting/Limit Switch, SPDT, Momentary, 240VDC, Screw Terminal, Top Rotary Actuator, Panel Mount
HONEYWELL
LSYCB1A
Snap Acting/Limit Switch, SPDT, Momentary, 240VDC, Screw Terminal, Top Plain Plunger Actuator, Panel Mount,
HONEYWELL
LSYCB4SX-FP
Snap Acting/Limit Switch, DPDT, Momentary, 240VDC, Screw Terminal, Top Plain Plunger Actuator, Panel Mount
HONEYWELL
LSYCC1A
Snap Acting/Limit Switch, SPDT, Momentary, 240VDC, Screw Terminal, Top Plain Plunger Actuator, Panel Mount
HONEYWELL
LSYCC1AE
Snap Acting/Limit Switch, SPDT, Momentary, 240VDC, Screw Terminal, Top Plain Plunger Actuator, Panel Mount
HONEYWELL
LSYCC3KY-FP
Snap Acting/Limit Switch, SPDT, Momentary, 240VDC, Screw Terminal, Top Plain Plunger Actuator, Panel Mount
HONEYWELL
LSYCC5KY-FP
Snap Acting/Limit Switch, SPDT, Momentary, 240VDC, Screw Terminal, Top Plain Plunger Actuator, Panel Mount
HONEYWELL
LSYCC7L
Snap Acting/Limit Switch, DPDT, Momentary, 240VDC, Screw Terminal, Top Plain Plunger Actuator, Panel Mount
HONEYWELL
LSYDC1AE
Snap Acting/Limit Switch, SPDT, Momentary, 240VDC, Screw Terminal, Top Roller Plunger Actuator, Panel Mount
HONEYWELL
©2020 ICPDF网 联系我们和版权申明