HIH6120-021-0011 [HONEYWELL]
Honeywell HumidIcon⢠Digital Humidity/Temperature Sensors;
| 型号： | HIH6120-021-0011 |
| 厂家： | 
Honeywell |
| 描述： | Honeywell HumidIcon⢠Digital Humidity/Temperature Sensors |
| 文件： | 总15页 (文件大小：1352K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Honeywell HumidIcon™ Digital
Humidity/Temperature Sensors
HIH6100 Series • ±4.0 %RH Accuracy
Datasheet
Honeywell HumidIcon™
Digital Humidity/Temperature Sensors
Honeywell HumidIcon™ Digital Humidity/Temperature Sensors, HIH6100 Series, are digital output-type relative humidity (RH)
and temperature sensors combined in the same package. These sensors provide an accuracy level of ±4.0 %RH.
ꢀ
ꢀ
ꢀ
•ꢀIndustry-leadingꢀlong-termꢀstabilityꢀ
•ꢀIndustry-leadingꢀTotalꢀErrorꢀBandꢀ
•ꢀIndustry-leadingꢀreliabilityꢀ
•ꢀ Trueꢀtemperature-compensatedꢀdigitalꢀI2C or SPI output
•ꢀ Energyꢀefficiency
•ꢀ Lowestꢀtotalꢀcostꢀsolutionꢀ ꢀ
•ꢀUltra-smallꢀpackageꢀsizeꢀandꢀoptions
ꢀ
ꢀ
•ꢀOtherꢀaccuraciesꢀavailable:ꢀ±1.7ꢀ%RHꢀ(HIH9000ꢀSeries),ꢀ±2.0ꢀ%RHꢀ(HIH8000ꢀSeries),ꢀ±3.0ꢀ%RHꢀ(HIH7000ꢀSeries),ꢀ
ꢀ andꢀ±4.5ꢀ%RHꢀ(HIH6000ꢀSeries)
What makes our sensors better?
HIH6131
IndꢀStRꢁ-lꢂAdIng totAl ꢂRRoR BAnd (tꢂB) (±5 %RH)*
HIH6130
HoneywellꢀspecifiesꢀTotalꢀErrorꢀBand—theꢀmostꢀcomprehensive,ꢀclear,ꢀandꢀmeaningfulꢀ
measurementꢀ—thatꢀprovidesꢀtheꢀsensor’sꢀtrueꢀaccuracyꢀofꢀ±5ꢀ%RHꢀoverꢀaꢀcompensatedꢀ
rangeꢀofꢀ5ꢀ°Cꢀtoꢀ50ꢀ°Cꢀ[41ꢀ°Fꢀtoꢀ122ꢀ°F]ꢀandꢀ10ꢀ%RHꢀtoꢀ90ꢀ%RH.ꢀTEBꢀincludesꢀallꢀerrorsꢀ
due to:
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
•ꢀHumidityꢀnon-linearity
•ꢀHumidityꢀhysteresis
•ꢀHumidityꢀnon-repeatability
•ꢀThermalꢀeffectꢀonꢀzero
•ꢀThermalꢀeffectꢀonꢀspan
•ꢀThermalꢀhysteresis
HIH6120
HIH6121
tꢃꢄaꢅ ꢂrrꢃr Baꢆꢇ
Errors
Humidity Non-Linearity
+
Humidity Hysteresis
=
Accuracy
+
Humidity Non-Repeatability
Total
Error Band
+
=
Thermal Effect on Zero
+
Thermal Effect on Span
+
Thermal Hysteresis
sensing.honeywell.com
2
Total Error Band should not be confused with “accuracy”, which is actually
a component of Total Error Band. Many competitors simply specify the
accuracy of their device; however, the specification may exclude hysteresis
and temperature effects, and may be calculated over a very narrow range, at
only one point in the range, or at their absolute best accuracy level. It is then
up to the customer to calibrate the device to make sure it has the accuracy
needed for the life of the application.
Honeywell’sꢀindustry-leadingꢀTotalꢀErrorꢀBandꢀprovidesꢀtheꢀfollowingꢀbenefitsꢀtoꢀtheꢀcustomer:ꢀ
•ꢀ ꢂꢅiꢉiꢆaꢄes iꢆꢇiꢊiꢇuaꢅꢅy ꢄesꢄiꢆꢋ and calibrating every sensor, which can increase their manufacturing time
and process
•ꢀ Supportsꢀsystemꢀaccuracyꢀandꢀwarrantyꢀrequirements
•ꢀ Helpsꢀtoꢀꢃꢌꢄiꢉize sysꢄeꢉ uꢌꢄiꢉe
•ꢀ Providesꢀexceꢅꢅeꢆꢄ seꢆsꢃr iꢆꢄerchaꢆꢋeabiꢅiꢄyꢀ—ꢀtheꢀcustomerꢀcan remove one sensor from the tape,
then remove the next sensor from the tape, and there is no part-to-part variation in accuracy
For more information about Total Error Band, please see the related technical
note, “Explanation of the Total Error Band Specification for Honeywell’s Digital
Humidity/Temperature Sensors.”
IndꢀStRꢁ-lꢂAdIng long-tꢂRm StABIlItꢁ
(1.2 %RH ovꢂR fIvꢂ ꢁꢂARS)*
Competitive humidity sensors need to go through a 12 hour at 75 %RH
rehydration process (which requires special equipment chambers) to correct
reflow temperature offset. Honeywell’s sensor also experiences an offset
after reflow; however, it only requires a five hour rehydration under ambient
conditions (>50 %RH). Honeywell’s industry-leading long term stability
provides the following benefits to the customer.
Honeywell’sꢀindustry-leadingꢀlong-termꢀstabilityꢀprovidesꢀtheꢀfollowingꢀbenefitsꢀtoꢀtheꢀcustomer:
•ꢀ Minimizesꢀsystemꢀperformanceꢀissues
•ꢀ Helpsꢀsupportꢀsystemꢀuptimeꢀbyꢀeliminatingꢀtheꢀneedꢀtoꢀserviceꢀorꢀreplaceꢀtheꢀsensorꢀduringꢀitsꢀapplicationꢀlife
•ꢀ Eliminatesꢀtheꢀneedꢀtoꢀregularlyꢀrecalibrateꢀtheꢀsensorꢀinꢀtheirꢀapplication,ꢀwhichꢀcanꢀbeꢀinconvenientꢀandꢀcostly
tRꢀꢂ, tꢂmpꢂRAtꢀRꢂ-ꢈompꢂnSAtꢂd dIgItAl I2ꢈ oR SpI
oꢀtpꢀt*
This typically allows the customer to remove the components associated
with signal conditioning from the PCB to free up space and reduce costs
associated with those components (e.g., acquisition, inventory, assembly).
True, temperature-compensated digital I2C or SPI output often eliminates
problems that could occur from having multiple signal conditioning
components across the PCB, as well as simplifies integration to the
microprocessor, eliminating the need for customer-implemented, complex
signal conditioning.
sensing.honeywell.com
3
IndꢀStRꢁ-lꢂAdIng RꢂlIABIlItꢁ*
Features
and Benefits
HIH6130/6131ꢀandꢀHIH6120/6121ꢀSeriesꢀ
sensors use a laser trimmed, thermoset
polymer capacitive sensing element. The
element’sꢀmultilayerꢀconstructionꢀprovidesꢀ
resisꢄaꢆce ꢄꢃ ꢉꢃsꢄ aꢌꢌꢅicaꢄiꢃꢆ hazarꢇs
such as condensation, dust, dirt, oils, and
common environmental chemicals, which helps
provide industry-leading stability and reliability
0
Y
%RH
±±4C
CURA
C
A
Offers customers the lowest total cost solution.
lowꢂSt totAl ꢈoSt SolꢀtIon*
Honeywell’sꢀHumidIconꢀHIH6100ꢀSeriesꢀoffersꢀcustomersꢀtheꢀꢅꢃꢍesꢄ ꢄꢃꢄaꢅ cꢃsꢄ
sꢃꢅuꢄiꢃꢆꢀdueꢀtoꢀtheꢀsensor’sꢀindustry-leadingꢀTotalꢀErrorꢀBandꢀandꢀitsꢀbeingꢀaꢀ
combined humidity/temperature sensor
One sensor does the work of two!
ꢈomBInꢂd HꢀmIdItꢁ And tꢂmpꢂRAtꢀRꢂ SꢂnSoR
The humidity and temperature sensors are co-located in the same package. This
allows the RH measurement to be temperature compensated and provides a
second, standalone temperature sensor output. This allows the user to ꢌurchase
ꢃꢆe seꢆsꢃr iꢆsꢄeaꢇ ꢃꢎ ꢄꢍꢃ
ꢂnꢂRgꢁ ꢂffIꢈIꢂnt*
•ꢀ ꢀ Low supply voltage: Canꢀoperateꢀdownꢀtoꢀ2.3ꢀVdc,ꢀwhichꢀallowsꢀuseꢀinꢀlowꢀ
energy and wireless-compatible applications to enhance energy savings and
prolong system battery life
•ꢀ ꢀ Low power consumption: The sensor goes into sꢅeeꢌ ꢉꢃꢇe when not taking
a measurement within the application, consuming only 1 µA of power versus
650ꢀµAꢀinꢀfullꢀoperationꢀinꢀaꢀbatteryꢀoperatedꢀsystem.ꢀSleepꢀmodeꢀhelpsꢀ
maximizeꢀbatteryꢀlife,ꢀreducesꢀpowerꢀsupplyꢀsize,ꢀandꢀreducesꢀtheꢀapplication’sꢀ
overall weight
*Competitive Differentiator
sensing.honeywell.com
4
HIgH RꢂSolꢀtIon
Features
and Benefits
Highꢀ14-bitꢀhumidityꢀsensorꢀresolutionꢀandꢀ14-bitꢀtemperatureꢀsensorꢀresolutionꢀ
withinꢀtheꢀapplicationꢀhelpꢀtheꢀuser’sꢀsystemꢀꢇeꢄecꢄ ꢄhe sꢉaꢅꢅesꢄ reꢅaꢄiꢊe
huꢉiꢇiꢄy ꢃr ꢄeꢉꢌeraꢄure chaꢆꢋe
Free up PCB space. Reduce costs.
tRꢀꢂ, tꢂmpꢂRAtꢀRꢂ-ꢈompꢂnSAtꢂd
dIgItAl I2ꢈ oR SpI oꢀtpꢀt*
Typically allows the customer to remove the components associated with signal
conditioningꢀfromꢀtheꢀPCBꢀtoꢀꢎree uꢌ sꢌace and reꢇuce cꢃsꢄs associated
withꢀthoseꢀcomponentsꢀ(e.g.,ꢀacquisition,ꢀinventory,ꢀassembly).ꢀOftenꢀeliminatesꢀ
problems that could occur from having multiple signal conditioning components
acrossꢀtheꢀPCB.ꢀSimplifiesꢀintegrationꢀtoꢀtheꢀmicroprocessor,ꢀeliminatingꢀtheꢀneedꢀ
for customer-implemented, complex signal conditioning
Choose options to best fit the application.
ꢀltRA-SmAll pAꢈKAgꢂ SIZꢂ
SOIC-8ꢀSMDꢀ(SurfaceꢀMountꢀDevice)ꢀandꢀSIPꢀ4ꢀPinꢀpackagesꢀareꢀultraꢀsmall,ꢀ
including the condensation-resistant versions with hydrophobic filter on-board
(HIH6121ꢀandꢀHIH6131).ꢀAllowsꢀforꢀflexibilityꢀofꢀuseꢀwithinꢀtheꢀapplication,ꢀ
ꢃccuꢌies ꢅess sꢌaceꢀonꢀtheꢀPCB,ꢀandꢀtypicallyꢀsimplifiesꢀplacementꢀonꢀcrowdedꢀ
PCBsꢀorꢀinꢀsmallꢀdevices
fIltꢂR
Available with hydrophobic filter and condensation-resistance, allowing for use iꢆ
ꢉaꢆy cꢃꢆꢇeꢆsiꢆꢋ eꢆꢊirꢃꢆꢉeꢆꢄs, or without hydrophobic filter, non-condensing
tApꢂ And Rꢂꢂl
Cost-effective tape-and-reel packaging allows for use in high volume, automated
pick-and-place manufacturing, eꢅiꢉiꢆaꢄiꢆꢋ ꢅeaꢇ ꢉisaꢅiꢋꢆꢉeꢆꢄꢀtoꢀtheꢀPCBꢀandꢀ
helping the customer to reꢇuce ꢉaꢆuꢎacꢄuriꢆꢋ cꢃsꢄs
wIdꢂ opꢂRAtIng tꢂmpꢂRAtꢀRꢂ RAngꢂ
-25ꢀ°Cꢀtoꢀ85ꢀ°Cꢀ[-13ꢀ°Fꢀtoꢀ185ꢀ°F]ꢀallowsꢀforꢀuseꢀinꢀmanyꢀapplicationsꢀ
optIonAl onꢂ oR two %RH lꢂvꢂl AlARm oꢀtpꢀtS
AꢀfeatureꢀofꢀtheꢀHIH6130ꢀandꢀHIH6131,ꢀthisꢀprovidesꢀtheꢀabilityꢀtoꢀmonitorꢀwhetherꢀ
the RH level has exceeded or fallen below predetermined and critical levels within
the application
mꢀltI-fꢀnꢈtIon ASIꢈ
Delivers flexibility within the application by lowering or eliminating the risk and cost
ofꢀOEMꢀcalibrationꢀ
RoHS And wꢂꢂꢂ ꢈomplIAnt, HAlogꢂn fRꢂꢂ
sensing.honeywell.com
5
Potential Applications
HvAꢈ/R
MayꢀbeꢀusedꢀtoꢀprovideꢀprecisionꢀRHꢀandꢀtemperatureꢀmeasurementꢀinꢀairꢀ
conditioning/air movement systems, enthalpy sensing, thermostats, humidifiers/
dehumidifiers, and humidistats to maintain occupant comfort and ideal storage
humidity/temperature while achieving low energy consumption, supporting system
accuracyꢀandꢀwarrantyꢀrequirements,ꢀmaximizingꢀsystemꢀuptime,ꢀandꢀimprovingꢀ
overallꢀsystemꢀquality.ꢀ
RꢂSpIRAtoRꢁ tHꢂRApꢁ
MayꢀbeꢀusedꢀtoꢀprovideꢀprecisionꢀRHꢀandꢀtemperatureꢀmeasurementꢀinꢀsleepꢀ
apnea machines and ventilators, enhancing patient comfort, safety and treatment
effectiveness with warm and humidified air.
InꢈꢀBAtoRS/mIꢈRoꢂnvIRonmꢂntS
MayꢀbeꢀusedꢀtoꢀprovideꢀoptimalꢀtemperatureꢀandꢀRHꢀlevelsꢀtoꢀsupportꢀcriticalꢀ
processes and experiments, enhancing process efficiency with desired climate
conditions.
AIR ꢈompRꢂSSoRS
MayꢀbeꢀusedꢀtoꢀprovideꢀprecisionꢀRHꢀmeasurementꢀinꢀcompressedꢀairꢀlines,ꢀallowingꢀ
the system to remove any condensation; dry compressed air is critical for customer
process control measurement.
wꢂAtHꢂR StAtIonS
MayꢀbeꢀusedꢀtoꢀprovideꢀprecisionꢀRHꢀandꢀtemperatureꢀmeasurementꢀinꢀground-basedꢀ
and airborne weather stations, allowing real time and highly accurate monitoring/
reporting of actual weather conditions.
tꢂlꢂꢈom ꢈABInꢂtS
MayꢀbeꢀusedꢀtoꢀprovideꢀprecisionꢀRHꢀandꢀtemperatureꢀmeasurementꢀinꢀtheꢀtelecomꢀ
cabinetꢀHVACꢀsystem;ꢀmaintainingꢀproperꢀtemperatureꢀandꢀhumidityꢀlevelsꢀinꢀtheꢀ
cabinet provides maximum system uptime and performance.
sensing.honeywell.com
6
Honeywell HumidIcon™ Digital Humidity/Temperature Sensors
tabꢅe 1. ꢂꢆꢊirꢃꢆꢉeꢆꢄaꢅ Sꢌeciꢎicaꢄiꢃꢆs
ꢈharacꢄerisꢄic
ꢈꢃꢆꢇiꢄiꢃꢆ
miꢆ.
tyꢌ.
max.
ꢀꢆiꢄ
Operatingꢀtemperatureꢀrange
Storage temperature range
Storage humidity
–
–
–
-25ꢀ[-13]
-40ꢀ[-40]
30
–
–
–
85[185]
85[185]
50
°Cꢀ[°F]
°Cꢀ[°F]
%RH
Solderingꢀtemperature:
automated
manual
IPC/EIA/JEDECꢀJ-STD-020D
applyꢀheatꢀforꢀ4ꢀsꢀmax.ꢀforꢀmanualꢀsoldering
–
–
–
–
260ꢀ[500]
350ꢀ[662]
°Cꢀ[°F]
ESD
MIL-STDꢀ883H,ꢀMethodꢀ3015.7
–
–
–
–
±4
kV
Latch-upꢀimmunity
–
±100
mA
MIL-STDꢀ202G,ꢀMethodꢀ213D,ꢀTestꢀConditionꢀC,ꢀ
half-sine,ꢀ6ꢀmsꢀ±3ꢀperpendicularꢀaxis,ꢀ3ꢀshockꢀpulsesꢀ
per axis
Shock
–
–
100
20
g
g
MIL-STDꢀ202G,ꢀMethodꢀ204D,ꢀTestꢀConditionꢀD,ꢀ
10ꢀHzꢀtoꢀ2000ꢀHz
Vibration
–
–
Lightꢀsensitivity
exposedꢀtoꢀ50ꢀlumensꢀyellowꢀlight;ꢀexhibitedꢀnoꢀchangeꢀinꢀoutput
tabꢅe 2. Huꢉiꢇiꢄy perꢎꢃrꢉaꢆce Sꢌeciꢎicaꢄiꢃꢆs
ꢈharacꢄerisꢄic
ꢈꢃꢆꢇiꢄiꢃꢆ
miꢆ.
tyꢌ.
max.
ꢀꢆiꢄ
Supply voltage variation
Compensated humidity range1
Compensated temp. range1
Resolution
Accuracy2
Total error band3
2.3ꢀVdcꢀtoꢀ5.5ꢀVdc
–
0.1
0.5
90
%RH
%RH
°Cꢀ[°F]
%RH
%RH
%RH
s
–
10
–
–
14ꢀbitꢀADCꢀresolution
–
5ꢀ[41]
–
50ꢀ[122]
0.04
±4
–
–
–
–
0
–
–
–
–
–
±5
Response time
airflow minimum 20 l/min
non-condensing
50ꢀ%RHꢀforꢀ5ꢀyears
6
–
8
Operatingꢀrange
100
±1.2
%RH
Longꢀtermꢀstability
±0.05
%RH
IPC/EIA/JEDECꢀJ-STD-020D,ꢀpeakꢀtemp.ꢀ
ofꢀ260ꢀ°Cꢀ[500ꢀ°F]
Impact of soldering
–
–
±2.5
%RH
Notes:
1ꢀConversionꢀFormulas:
14ꢀbitꢀADCꢀoutputꢀforꢀhumidityꢀtoꢀ%RH:
14ꢀbitꢀADCꢀoutputꢀforꢀtemperatureꢀconversionꢀtoꢀ°C:
Humidity_14_bit_ADC_output
Humidityꢀ(%RH)ꢀ =ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ
Temperature_14_bit_ADC_output
Temperatureꢀ(C°)ꢀ =ꢀ
x 100
ꢀꢀxꢀ165ꢀ–ꢀ40
214 – 2
214 – 2
2
Accuracyꢀisꢀspecifiedꢀatꢀtheꢀtypicalꢀsupplyꢀvoltageꢀofꢀ3.3ꢀVdcꢀandꢀatꢀ25ꢀ°Cꢀ[77ꢀ°F].ꢀItꢀisꢀtheꢀmaximumꢀdeviationꢀfromꢀtheꢀidealꢀtransferꢀfunctionꢀofꢀ
relativeꢀhumidityꢀmeasuredꢀoverꢀtheꢀhumidityꢀrangeꢀofꢀ10ꢀ%RHꢀtoꢀ90ꢀ%RHꢀandꢀincludesꢀallꢀerrorsꢀdueꢀtoꢀhumidityꢀnon-linearity,ꢀhumidityꢀhysteresisꢀ
and humidity non-repeatability.
3ꢀTotalꢀerrorꢀbandꢀisꢀtheꢀmaximumꢀdeviationꢀfromꢀtheꢀidealꢀtransferꢀfunctionꢀofꢀrelativeꢀhumidityꢀoverꢀtheꢀcompensatedꢀrangeꢀofꢀ5ꢀ°Cꢀ[41ꢀ°F]ꢀtoꢀ
50ꢀ°Cꢀ[122ꢀ°F].ꢀItꢀincludesꢀallꢀerrorsꢀdueꢀtoꢀhumidityꢀnon-linearity,ꢀhumidityꢀhysteresis,ꢀhumidityꢀnon-repeatability,ꢀthermalꢀeffectꢀonꢀzero,ꢀthermalꢀ
effect on span and thermal hysteresis.
sensing.honeywell.com
7
HIH6100 Series • ±4.0 %RH Accuracy
tabꢅe 3. teꢉꢌeraꢄure perꢎꢃrꢉaꢆce Sꢌeciꢎicaꢄiꢃꢆs
ꢈharacꢄerisꢄic
ꢈꢃꢆꢇiꢄiꢃꢆ
miꢆ.
tyꢌ.
max.
ꢀꢆiꢄ
Supply voltage variation
Compensated temp. range
Resolution
2.3ꢀVdcꢀtoꢀ5.5ꢀVdc
–
0.5
–
1.0
50ꢀ[122]
0.025
±1.0
°C
°Cꢀ[°F]
°C
–
5ꢀ[41]
14ꢀbitꢀADCꢀresolution
–
–
–
5
–
–
Accuracyꢀ(BFSL)1
–
°C
Response time
1/e slow moving air
25ꢀ°Cꢀforꢀ5ꢀyears
–
30
s
Longꢀtermꢀstability
–
±0.05
°C/yr
IPC/EIA/JEDECꢀJ-STD-020D,ꢀpeakꢀtemp.
ofꢀ260ꢀ°Cꢀ[500ꢀ°F]
Impact of soldering
–
–
±0.1
°C
Note:
1 Accuracy is specified over the compensated temperature range.
tabꢅe 4. ꢈurreꢆꢄ ꢈꢃꢆsuꢉꢌꢄiꢃꢆ
ꢈharacꢄerisꢄic
vDD
Abbr.
ꢈꢃꢆꢇiꢄiꢃꢆ
tyꢌ.
max.
ꢀꢆiꢄ
Sleep current
3.3
ISLEEP
–
0.6
1
µA
Supplyꢀcurrent:
I2C
SPI
3.3
3.3
IDD
IDD
14ꢀbitꢀfastestꢀupdate,ꢀnoꢀsleep
14ꢀbitꢀfastestꢀupdate,ꢀnoꢀsleep
0.65
0.75
1
1
mA
mA
tabꢅe 5. Iꢆꢌuꢄ aꢆꢇ ouꢄꢌuꢄ ꢈharacꢄerisꢄics
ꢈharacꢄerisꢄic
Abbr.
ꢈꢃꢆꢇiꢄiꢃꢆ
miꢆ.
tyꢌ.
max.
ꢀꢆiꢄ
Supply voltage
VDD
VOL
VOH
VIL
–
2.3
–
3.3
–
5.5
20ꢀ%
–
Vdc
VDD
VDD
VDD
VDD
Lowꢀlevelꢀoutputꢀvoltage
High level output voltage
Lowꢀlevelꢀinputꢀvoltage
High level input voltage
IOLꢀ=ꢀ2.8ꢀmAꢀmin.
IOHꢀ=ꢀ-2.8ꢀmAꢀmin.
80ꢀ%
–
–
–
–
–
20ꢀ%
–
VIH
80ꢀ%
–
Pull-upꢀresistor:
I2C
RP
RSS
–
–
–
–
2.2
10
–
–
kOhm
kOhm
SPI (for SS only)
tabꢅe 6. measureꢉeꢆꢄ tiꢉiꢆꢋ
ꢈharacꢄerisꢄic
Abbr.
ꢈꢃꢆꢇiꢄiꢃꢆ
miꢆ.
tyꢌ.
max.
ꢀꢆiꢄ
Start-up time (power-on to
data ready)
TSTA
14ꢀbitꢀTHꢀandꢀ14ꢀbitꢀhumidityꢀresolution
–
50
60
ms
Updateꢀrate
applicationꢀdependent:ꢀmeasurementsꢀareꢀtakenꢀonlyꢀwhenꢀtheꢀapplicationꢀrequestsꢀthem
sensing.honeywell.com
8
Honeywell HumidIcon™ Digital Humidity/Temperature Sensors
fiꢋure 1. I2ꢈ tiꢉiꢆꢋ diaꢋraꢉ
SDA
tLOW
tSUDAT
tHDSTA
tBUS
SCL
tHDSTA
tHDDAT
tHIGH
tSUSTO
tSUSTA
ꢈharacꢄerisꢄic
Abbr.
FSCL
tHDSTA
tLOW
miꢆ.
tyꢌ.
max.
ꢀꢆiꢄ
SCLꢀclockꢀfrequency
100
0.1
0.6
0.6
0.1
0
–
–
–
–
–
–
–
–
–
400
–
kHz
µs
µs
µs
µs
µs
µs
µs
µs
StartꢀconditionꢀholdꢀtimeꢀrelativeꢀtoꢀSCLꢀedge
MinimumꢀSCLꢀclockꢀlowꢀwidth1
MinimumꢀSCLꢀclockꢀhighꢀwidth1
–
tHIGH
–
StartꢀconditionꢀsetupꢀtimeꢀrelativeꢀtoꢀSCLꢀedge
DataꢀholdꢀtimeꢀonꢀSDAꢀrelativeꢀtoꢀSCLꢀedge
DataꢀsetupꢀtimeꢀonꢀSDAꢀrelativeꢀtoꢀSCLꢀedge
StopꢀconditionꢀsetupꢀtimeꢀonꢀSCL
tSUSTA
tHDDAT
tSUDAT
tSUSTO
tBUS
–
0.5
–
0.1
0.1
1
–
Busꢀfreeꢀtimeꢀbetweenꢀstopꢀandꢀstartꢀcondition
–
Note:
1 CombinedꢀlowꢀandꢀhighꢀwidthsꢀmustꢀequalꢀorꢀexceedꢀminimumꢀSCLꢀperiod.
fiꢋure 2. SpI tiꢉiꢆꢋ diaꢋraꢉ
tHDSS
tHIGH tLOW
SCLK
HiZ
HiZ
MISO
SS
tSUSS
tBUS
max.
tCLKD
tCLKD
ꢈharacꢄerisꢄic
Abbr.
miꢆ.
tyꢌ.
ꢀꢆiꢄ
SCLKꢀclockꢀfrequency
fSCL
tHDSS
tLOW
tHIGH
tCLKD
tSUSS
tBUS
50
2.5
0.6
0.6
0
–
–
–
–
–
–
–
800
–
kHz
μs
μs
μs
μs
μs
µs
SS drop to first clock edge
MinimumꢀSCLKꢀclockꢀlowꢀwidth1
MinimumꢀSCLKꢀclockꢀhighꢀwidth1
Clock edge to data transition
–
–
0.5
–
Rise of SS relative to last clock edge
0.1
2
BusꢀfreeꢀtimeꢀbetweenꢀriseꢀandꢀfallꢀofꢀSS
Note:
1 CombinedꢀlowꢀandꢀhighꢀwidthsꢀmustꢀequalꢀorꢀexceedꢀminimumꢀSCLKꢀperiod.
–
sensing.honeywell.com
9
HIH6100 Series • ±4.0 %RH Accuracy
tabꢅe 7. HIH6130/6131 aꢆꢇ HIH6120/6121 Series maxiꢉaꢅ Accuracy1
(perꢎꢃrꢉaꢆce is sꢌeciꢎieꢇ beꢄꢍeeꢆ 10 %RH aꢆꢇ 90 %RH)
90
80
70
60
50
40
30
20
±1
±1
±1
±2
±2
±2
±2
±2
±2
±2
±2
±2
±2
±2
±1
±1
±1
±2
±2
±2
±2
±3
±3
±3
±3
±3
±3
±3
±3
±3
±3
±3
±3
±3
10
±2
±2
±2
±2
±3
±3
±3
±3
±3
±3
±3
±3
±3
±3
±3
±3
±3
±2
±2
±2
±2
±3
±3
±3
±3
±3
±3
±3
±3
±3
±3
±3
±3
±3
20
±3
±3
±2
±2
±2
±3
±3
±3
±3
±3
±3
±3
±3
±3
±3
±3
±3
±3
±3
±2
±2
±2
±3
±3
±3
±3
±3
±3
±3
±3
±3
±3
±3
±3
30
±3
±3
±2
±2
±2
±3
±3
±3
±3
±3
±3
±3
±3
±3
±3
±3
±3
±3
±3
±2
±2
±2
±3
±3
±3
±3
±3
±3
±3
±3
±3
±3
±3
±3
40
±3
±3
±2
±2
±2
±3
±3
±3
±3
±3
±3
±3
±3
±3
±3
±3
±3
±2
±2
±1
±2
±2
±2
±2
±2
±2
±2
±2
±2
±2
±2
±1
±1
±1
50
10
0
1MaximalꢀaccuracyꢀisꢀtheꢀmeanꢀvalueꢀbetweenꢀrisingꢀandꢀfallingꢀRHꢀpoints
tꢂmpꢂRAtꢀRꢂ (°ꢈ)
sensing.honeywell.com
10
Honeywell HumidIcon™ Digital Humidity/Temperature Sensors
fiꢋure 3. SoIꢈ-8 Smd tyꢌicaꢅ Aꢌꢌꢅicaꢄiꢃꢆ ꢈircuiꢄs
I2ꢈ
SpI
V
SUPPLY = 2.3 Vdc to 5.5 Vdc
VSUPPLY = 2.3 Vdc to 5.5 Vdc
2.2
kOhm
2.2
Digital Humidity/Temp.
Sensor
10
kOhm
kOhm
Digital Humidity/Temp.
Sensor
8
1
2
3
4
6
5
SCL
VDD
8
1
2
3
4
5
6
SS
VDD
12 V
0.22 µF
0.22 µF
SDA
V
CORE
SCLK
VCORE
LED
0.1 µF
0.1 µF
AL_L
AL_H
V
SS
MISO
AL_L
V
SS
LED
7
NC
GND
7
NC
GND
GND
fiꢋure 4. SoIꢈ-8 Smd mꢃuꢆꢄiꢆꢋ diꢉeꢆsiꢃꢆs, pꢈB laꢆꢇiꢆꢋ paꢄꢄerꢆ aꢆꢇ piꢆꢃuꢄ [fꢃr reꢎereꢆce ꢃꢆꢅy: ꢉꢉ/[iꢆ].)
mꢃuꢆꢄiꢆꢋ
laꢆꢇiꢆꢋ paꢄꢄerꢆ
1,905
[0.075]
4,90
8X 0,61
[0.024]
[0.193]
0,15
[0.006]
8
7
5
6
8X 2,03
[0.08]
3,90
[0.153]
6,0
[0.236]
4X 4,9
[0.193]
1
2
4
3
0,203
[0.0080]
6X 1,27
[0.05]
2,055
[0.081]
1,27
[0.050]
0.41
[0.016]
piꢆꢃuꢄ ꢎꢃr I2ꢈ versiꢃꢆs
piꢆꢃuꢄ ꢎꢃr SpI versiꢃꢆs
piꢆ
ASIꢈ paꢇ
descriꢌꢄiꢃꢆ
piꢆ
ASIꢈ paꢇ
descriꢌꢄiꢃꢆ
1
2
VCORE
VSS
connectꢀviaꢀ0.1ꢀµFꢀtoꢀground
supply ground
1
2
VCORE
VSS
connectꢀviaꢀ0.1ꢀµFꢀtoꢀground
supply ground
3
SCL
SDA
AL_H
AL_L
NC
I2C clock
I2C data
3
SS
slave select (Input)
4
4
SCLK
MISO
AL_L
NC
serial clock
51
61
7
alarm output high
alarm output low
not connected externally
5
61
master-in-slave-out
alarm output low
7
not connected externally
supplyꢀvoltage,ꢀconnectꢀviaꢀ0.22ꢀµFꢀtoꢀground
8
VDD
supplyꢀvoltage,ꢀconnectꢀviaꢀ0.22ꢀµFꢀtoꢀground
8
VDD
1 DoꢀnotꢀconnectꢀPin(s)ꢀ5ꢀand/orꢀ6ꢀifꢀtheꢀbuilt-inꢀalarmꢀfeatureꢀisꢀnotꢀdesired.
1 Do not connect Pin 6 if the built-in alarm feature is not desired.
taꢌe aꢆꢇ Reeꢅ
13
[0.51]
4,00
[0.157]
1,50
[0.059]
1,75
[0.069]
0,29
[0.011]
5,50
[0.216]
102
[4.0]
12.00
[0.472]
8,00
[0.315]
2,58
[0.102]
330
[13,0]
17,4
[0.68]
sensing.honeywell.com
11
HIH6100 Series • ±4.0 %RH Accuracy
fiꢋure 5. SIp 4 piꢆ tyꢌicaꢅ Aꢌꢌꢅicaꢄiꢃꢆ ꢈircuiꢄ
V
SUPPLY = 2.3 Vdc to 5.5 Vdc
2.2
kOhm
2.2
kOhm
Digital Humidity/Temp.
Sensor
1
2
3
4
SCL
V
DD
0.22 µF
SDA
V
SS
GND
fiꢋure 6. SIp 4 piꢆ mꢃuꢆꢄiꢆꢋ diꢉeꢆsiꢃꢆs, pꢈB laꢆꢇiꢆꢋ paꢄꢄerꢆ aꢆꢇ piꢆꢃuꢄ [fꢃr reꢎereꢆce ꢃꢆꢅy: ꢉꢉ/[iꢆ].)
mꢃuꢆꢄiꢆꢋ
laꢆꢇiꢆꢋ paꢄꢄerꢆ
4,90
[0.193]
1,905
[0.075]
1,05 DIA.
[0.040]
0,65 DIA.
[0.025]
0,063
[0.0025]
3,90
[0.153]
1,27
[0.050]
1,20
[0.047]
8,9
[0.35]
piꢆ
ASIꢈ paꢇ
descriꢌꢄiꢃꢆ
1
2
3
4
VDD
VSS
connectꢀviaꢀ0.22ꢀµFꢀtoꢀground
supply ground
I2C clock
PCB
5,0
[0.197]
1,2 - 2,0
[0.05 - 0.08]
SCL
SDA
I2C data
4
1
2
3
0,203
[0.0080]
1,27
[0.050]
0.41
[0.016]
taꢌe aꢆꢇ Reeꢅ1
1,50
[0.059]
4,00
[0.157]
13
[0.51]
1,75
[0.069]
0,32
[0.013]
5,00
[0.197]
102
[4.0]
16,00
[0.630]
8,00
[0.315]
2,61
[0.103]
330
[13,0]
21,4
[0.84]
1 Forꢀordersꢀofꢀ250ꢀtoꢀ1000ꢀunits
sensing.honeywell.com
12
Honeywell HumidIcon™ Digital Humidity/Temperature Sensors
prꢃꢇucꢄ nꢃꢉeꢆcꢅaꢄure
orꢇer guiꢇe
ꢈaꢄaꢅꢃꢋ lisꢄiꢆꢋ
descriꢌꢄiꢃꢆ
HoneywellꢀHumidIcon™ꢀDigitalꢀHumidity/TemperatureꢀSensors:ꢀHIH6130/6131ꢀSeries,ꢀSPI,ꢀ±5ꢀ%RHꢀtotalꢀerrorꢀ
band,ꢀSOIC-8ꢀSMD,ꢀnoꢀfilter,ꢀnon-condensing,ꢀ1000ꢀunitsꢀonꢀtapeꢀandꢀreelꢀ
HIH6130-000-001
HoneywellꢀHumidIcon™ꢀDigitalꢀHumidity/TemperatureꢀSensors:ꢀHIH6130/6131ꢀSeries,ꢀSPI,ꢀ±5ꢀ%RHꢀtotalꢀerrorꢀ
band,ꢀSOIC-8ꢀSMD,ꢀnoꢀfilter,ꢀnon-condensing,ꢀfiveꢀunitsꢀonꢀtapeꢀ(sample)
HIH6130-000-001S
HIH6131-000-001
HIH6131-000-001S
HIH6130-021-001
HIH6130-021-001S
HIH6131-021-001
HIH6131-021-001S
HIH6120-021-0011
HIH6120-021-001S
HIH6121-021-0011
HIH6121-021-001S
HoneywellꢀHumidIcon™ꢀDigitalꢀHumidity/TemperatureꢀSensors:ꢀHIH6130/6131ꢀSeries,ꢀSPI,ꢀ±5ꢀ%RHꢀtotalꢀerrorꢀ
band,ꢀSOIC-8ꢀSMD,ꢀhydrophobicꢀfilter,ꢀcondensation-resistant,ꢀ1000ꢀunitsꢀonꢀtapeꢀandꢀreel
HoneywellꢀHumidIcon™ꢀDigitalꢀHumidity/TemperatureꢀSensors:ꢀHIH6130/6131ꢀSeries,ꢀSPI,ꢀ±5ꢀ%RHꢀtotalꢀerrorꢀ
band,ꢀSOIC-8ꢀSMD,ꢀhydrophobicꢀfilter,ꢀcondensation-resistant,ꢀfiveꢀunitsꢀonꢀtapeꢀ(sample)
HoneywellꢀHumidIcon™ꢀDigitalꢀHumidity/TemperatureꢀSensors:ꢀHIH6130/6131ꢀSeries,ꢀI2C,ꢀ±5ꢀ%RHꢀtotalꢀerrorꢀ
band,ꢀSOIC-8ꢀSMD,ꢀnoꢀfilter,ꢀnon-condensing,ꢀ1000ꢀunitsꢀonꢀtapeꢀandꢀreel
HoneywellꢀHumidIcon™ꢀDigitalꢀHumidity/TemperatureꢀSensors:ꢀHIH6130/6131ꢀSeries,ꢀI2C,ꢀ±5ꢀ%RHꢀtotalꢀerrorꢀ
band,ꢀSOIC-8ꢀSMD,ꢀnoꢀfilter,ꢀnon-condensing,ꢀfiveꢀunitsꢀonꢀtapeꢀ(sample)
HoneywellꢀHumidIcon™ꢀDigitalꢀHumidity/TemperatureꢀSensors:ꢀHIH6130/6131ꢀSeries,ꢀI2C,ꢀ±5ꢀ%RHꢀtotalꢀerrorꢀ
band,ꢀSOIC-8ꢀSMD,ꢀhydrophobicꢀfilter,ꢀcondensation-resistant,ꢀ1000ꢀunitsꢀonꢀtapeꢀandꢀreel
HoneywellꢀHumidIcon™ꢀDigitalꢀHumidity/TemperatureꢀSensors:ꢀHIH6130/6131ꢀSeries,ꢀI2C,ꢀ±5ꢀ%RHꢀtotalꢀerrorꢀ
band,ꢀSOIC-8ꢀSMD,ꢀhydrophobicꢀfilter,ꢀcondensation-resistant,ꢀfiveꢀunitsꢀonꢀtapeꢀ(sample)
HoneywellꢀHumidIcon™ꢀDigitalꢀHumidity/TemperatureꢀSensors:ꢀHIH6120/6121ꢀSeries,ꢀI2C,ꢀ±5ꢀ%RHꢀtotalꢀerrorꢀ
band,ꢀSIPꢀ4ꢀPin,ꢀnoꢀfilter,ꢀnon-condensing,ꢀ100ꢀunitsꢀonꢀtapeꢀ
HoneywellꢀHumidIcon™ꢀDigitalꢀHumidity/TemperatureꢀSensors:ꢀHIH6120/6121ꢀSeries,ꢀI2C,ꢀ±5ꢀ%RHꢀtotalꢀerrorꢀ
band,ꢀSIPꢀ4ꢀPin,ꢀnoꢀfilter,ꢀnon-condensing,ꢀfiveꢀunitsꢀonꢀtapeꢀ(sample)
HoneywellꢀHumidIcon™ꢀDigitalꢀHumidity/TemperatureꢀSensors:ꢀHIH6120/6121ꢀSeries,ꢀI2C,ꢀ±5ꢀ%RHꢀtotalꢀerrorꢀ
band,ꢀSIPꢀ4ꢀPin,ꢀhydrophobicꢀfilter,ꢀcondensation-resistant,ꢀ100ꢀunitsꢀonꢀtape
HoneywellꢀHumidIcon™ꢀDigitalꢀHumidity/TemperatureꢀSensors:ꢀHIH6120/6121ꢀSeries,ꢀI2C,ꢀ±5ꢀ%RHꢀtotalꢀerrorꢀ
band,ꢀSIPꢀ4ꢀPin,ꢀhydrophobicꢀfilter,ꢀcondensation-resistant,ꢀfiveꢀunitsꢀonꢀtapeꢀ(sample)
1ꢀOrdersꢀofꢀ250ꢀunitsꢀorꢀmoreꢀareꢀpackagedꢀonꢀtapeꢀandꢀreel.
sensing.honeywell.com
13
HIH6100 Series • ±4.0 %RH Accuracy
SENSOR REHYDRATION
WARNING
PERSONAL INJURY
notIꢈꢂ:
SꢂnSoR RꢂHꢁdRAtIon
DO NOT USE these products as safety or emergency stop
devices or in any other application where failure of the
product could result in personal injury.
ꢀ •ꢀ Exposureꢀtoꢀelevatedꢀtemperatures,ꢀsuchꢀasꢀthoseꢀ
experienced during solder reflow, may dry out the sensing
element. It is recommended that the sensor be allowed time
to rehydrate after soldering or other high temperature/dry
exposures.
Failure to comply with these instructions could result in
death or serious injury.
ꢀ •ꢀ Exposureꢀtoꢀtheseꢀconditionsꢀwillꢀnotꢀpermanentlyꢀdamageꢀtheꢀ
sensor. It will generally return to its factory-calibrated value after
rehydration.
WARNING
MISUSE OF DOCUMENTATION
•ꢀ Theꢀinformationꢀpresentedꢀinꢀthisꢀproductꢀsheetꢀisꢀforꢀ
reference only. Do not use this document as a product
installation guide.
•ꢀ Completeꢀinstallation,ꢀoperation,ꢀandꢀmaintenanceꢀ
information is provided in the instructions supplied with
each product.
ꢀ •ꢀ Ifꢀrehydrationꢀisꢀnotꢀperformed,ꢀtheꢀsensorꢀmayꢀreadꢀaꢀslightꢀ
offset that slowly disappears over time as the sensor becomes
exposed to ambient conditions. Conversely, extended
exposure to condensing and high humidity environments
(>90ꢀ%RH)ꢀmayꢀcauseꢀaꢀrevisableꢀshiftꢀinꢀreadingsꢀwhichꢀwillꢀ
generally return to normal after the sensor has been allowed to
dry off.
Failure to comply with these instructions could result in
death or serious injury.
To rehydrate the sensor, expose it to room temperature under
wARRAntꢁ/Rꢂmꢂdꢁ
ambientꢀconditionsꢀ(>50ꢀ%RH)ꢀforꢀaꢀminimumꢀofꢀfiveꢀhours.
Honeywell warrants goods of its manufacture as being free of
defectiveꢀmaterialsꢀandꢀfaultyꢀworkmanship.ꢀHoneywell’sꢀstandardꢀ
product warranty applies unless agreed to otherwise by Honeywell
in writing; please refer to your order acknowledgement or consult
your local sales office for specific warranty details. If warranted
goods are returned to Honeywell during the period of coverage,
Honeywell will repair or replace, at its option, without charge those
items it finds defective. the ꢎꢃreꢋꢃiꢆꢋ is buyer’s sꢃꢅe reꢉeꢇy
aꢆꢇ is iꢆ ꢅieu ꢃꢎ aꢅꢅ ꢃꢄher ꢍarraꢆꢄies, exꢌresseꢇ ꢃr iꢉꢌꢅieꢇ,
iꢆcꢅuꢇiꢆꢋ ꢄhꢃse ꢃꢎ ꢉerchaꢆꢄabiꢅiꢄy aꢆꢇ ꢎiꢄꢆess ꢎꢃr a ꢌarꢄicu-
ꢅar ꢌurꢌꢃse. Iꢆ ꢆꢃ eꢊeꢆꢄ shaꢅꢅ Hꢃꢆeyꢍeꢅꢅ be ꢅiabꢅe ꢎꢃr cꢃꢆse-
queꢆꢄiaꢅ, sꢌeciaꢅ, ꢃr iꢆꢇirecꢄ ꢇaꢉaꢋes.
AddItIonAl InfoRmAtIon
TheꢀfollowingꢀassociatedꢀliteratureꢀisꢀavailableꢀonꢀtheꢀWeb:
•ꢀ Productꢀinstallationꢀinstructions
•ꢀ Productꢀapplicationꢀnote
•ꢀ Applicationꢀsheets:
– Humidity Sensor Performance Characteristics
ꢀ
ꢀ
–ꢀHumidityꢀSensorꢀTheoryꢀandꢀBehavior
–ꢀHumidityꢀSensorꢀMoistureꢀandꢀPsychrometrics
– Humidity Sensor Chemical Resistivity
ꢀ
–ꢀThermosetꢀPolymer-BasedꢀCapacitiveꢀSensors
Whileꢀweꢀprovideꢀapplicationꢀassistanceꢀpersonally,ꢀthroughꢀourꢀ
literature and the Honeywell website, it is up to the customer to
determine the suitability of the product in the application.
•ꢀ TechnicalꢀNotes:
– I2C Communication with the Honeywell HumidIcon™ Digital
Humidity/Temperature Sensors
– SPI Communication with the Honeywell HumidIcon™ Digital
Humidity/Temperature Sensors
Specifications may change without notice. The information we
supply is believed to be accurate and reliable as of this printing.
However, we assume no responsibility for its use.
ꢀ –ꢀ UsingꢀAlarmsꢀonꢀtheꢀHoneywellꢀHumidIcon™ꢀDigitalꢀ
Humidity/Temperature Sensors
ꢀ –ꢀ EnteringꢀandꢀUsingꢀCommandꢀModeꢀonꢀtheꢀHoneywellꢀ
HumidIcon™ Digital Humidity/Temperature Sensors
sensing.honeywell.com
14
Find out more
Honeywell serves its customers
through a worldwide network
of sales offices, representatives
and distributors. For application
assistance, current specifications,
pricing or name of the nearest
Authorized Distributor, contact
your local sales office.
To learn more about Honeywell’s
sensing and control products,
call +1-815-235-6847 or
1-800-537-6945, visit
sensing.honeywell.com, or e-
mail inquiries to
info.sc@honeywell.com
Sensing and Control
Honeywell
1985 Douglas Drive North
Golden Valley, MN 55422
honeywell.com
009059-6-EN
August 2013
Copyright © 2013 Honeywell International Inc. All rights reserved.
相关型号：
©2020 ICPDF网 联系我们和版权申明