HIH-4602-C [HONEYWELL]

Humidity Sensors; 湿度传感器
HIH-4602-C
型号: HIH-4602-C
厂家: Honeywell    Honeywell
描述:

Humidity Sensors
湿度传感器

传感器 PC
文件: 总8页 (文件大小:232K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
HIH-4602-A/C Series  
Humidity Sensors  
DESCRIPTION  
The HIH-4602-A contains an integral thermistor, while the HIH-  
4602-C contains an integral precision RTD.  
HIH-4602-A/C Series Relative Humidity (RH) sensors combine  
both relative humidity and temperature sensing in a TO-5  
housing with a hydrophobic sintered stainless steel filter.  
Factory calibration data supplied with each sensor allows  
individually matched downstream electronics and ±±.5 %RH  
total accuracy.  
The laser-trimmed, thermoset polymer capacitive sensing  
elements have on-chip integrated signal conditioning.  
The temperature sensor is thermally connected with the RH  
sensor making the HIH-4602-A/C often ideal for measuring  
dew point and other absolute moisture terms.  
FEATURES  
POTENTIAL APPLICATIONS  
Near linear voltage output vs %RH  
Laser-trimmed interchangeability  
Enhanced accuracy, fast response  
Chemically resistant  
Stable, low drift performance  
Built-in static protection  
Refrigeration  
Drying  
Meteorology  
Battery-powered systems  
OEM (Original Equipment Manufacturer) assemblies  
Often ideal for dew point and absolute moisture  
measurements  
TO-5 housing  
HIH-4602-A/C Series  
TABLE 1. PERFORMANCE SPECIFICATIONS (At 5 Vdc supply and 25 ºC [77 ºF] unless otherwise noted.)  
Parameter  
Minimum  
Typical  
Maximum  
Unit  
Specific  
Note  
Interchangeability (first order curve)  
0% RH to 59% RH  
60% RH to 100% RH  
Accuracy (best fit straight line)  
Hysterisis  
Repeatability  
Settling time  
Response time (1/e in slow moving air)  
Stability (at 50% RH in one year)  
Voltage supply  
-5  
-8  
-3.5  
5
8
+3.5  
% RH  
% RH  
% RH  
% RH  
% RH  
ms  
1
±
±0.5  
70  
50  
±1.2  
s
% RH  
Vdc  
µA  
4
5.8  
500  
Current supply  
Output voltage temp. coefficient at 50% RH, 5 V  
Voltage output (1st order curve fit)  
200  
-4  
mV/ºC  
VOUT=(VSUPPLY)(0.0062(sensor RH) + 0.16), typical at 25 ºC  
True RH = (sensor RH)/(1.0546-0.00216T), T in ºC  
Temperature compensation  
Operating temperature  
Operating humidity  
Storage temperature  
Storage humidity  
Specific Notes:  
1. Device is calibrated at 5 Vdc and 25 ºC.  
2. Non-condensing environment.  
-40[-40]  
0
-50[-58]  
See Figure 1.  
See Figure 1.  
85[185]  
100  
125[257]  
ºC[ºF]  
% RH  
ºC[ºF]  
% RH  
2
2
See Figure 2.  
General Notes:  
Sensor is ratiometric to supply voltage.  
Extended exposure to >90% RH causes a reversible shift of  
±% RH.  
Sensor is light sensitive. For best performance, shield sensor  
from bright light.  
FACTORY CALIBRATION DATA  
HIH-4602 Sensors are supplied with a calibration and data  
printout. See Table 2.  
TABLE 3. HIH-4602-A NTC THERMISTOR TEMPERATURE  
SPECIFICTIONS  
Rb = 100 kOhm ±5% at 25 ºC  
TABLE 2. EXAMPLE DATA PRINTOUT  
Beta = 4250, 25 ºC to 85 ºC  
Model  
Channel  
Wafer  
MRP  
HIH-4602-C  
92  
0±0996M  
±±7±1±  
1/T = a + b(Ln R) + c(Ln R) ^ ±, T in degrees K  
Temp. ºC  
Resistance  
±51000  
±±590  
Low  
0
Mid  
50  
100  
Calculated values at 5 V  
High  
5569  
VOUT at 0% RH  
0.826 V  
±.198 V  
a = 0.00082808±  
b = 0.000208691  
c = 8.0812E-08  
VOUT at 75.±% RH  
Linear output for ±.5% RH  
accuracy at 25 °C  
Zero offset  
Slope  
0.826 V  
±1.48± mV/%RH  
(VOUT - zero offset)/slope  
(VOUT - 0.826)/0.0±15  
TABLE 4. HIH-4602-C RTD TEMPERATURE SENSOR  
SPECIFICATIONS  
RH  
Thin film platinum RTD – Class 2B (Ro: ±0.25%)  
DIN EN 60571 (PER IEC 751)  
TCR = ±750 ppm/ºC  
Ratiometric response for  
0% RH to 100% RH  
VOUT  
VSUPPLY (0.1652 to 0.7952)  
1000 Ohm at 0 ºC [±2 ºF]  
2
www.honeywell.com/sensing  
Humidity Sensors  
FIGURE 1. OPERATING ENVIRONMENT (Non-condensing environment.)  
FIGURE 2. STORAGE ENVIRONMENT (Non-condensing environment.)  
Honeywell Sensing and Control  
±
HIH-4602-A/C Series  
FIGURE 3. TYPICAL OUTPUT VOLTAGE VS RELATIVE HUMIDITY (At 25 ºC and 5 V.)  
4
3.5  
3
2.5  
2
Sensor Response  
Sensor Response  
Best Linear Fit  
1.5  
1
0.5  
0
20  
40  
60  
80  
100  
Relative Humidity (%RH)  
FIGURE 4. TYPICAL OUTPUT VOLTAGE (BFSL) VS RELATIVE HUMIDITY (At 0 ºC, 70 ºC and 5 V.)  
4.5  
4
3.5  
3
2.5  
2
0 C  
70 C  
1.5  
1
0.5  
0
0
10  
20  
30  
40  
50  
60  
70  
80  
90  
100  
Relative Humidity (%)  
4
www.honeywell.com/sensing  
Humidity Sensors  
FIGURE 5. HIH-4602-A/C 1MOUNTING DIMENSIONS (For reference only. mm/[in])  
1. Case ground  
2. Vdc out  
±. (-) Power or ground  
4. (+) Vdc supply  
5., 6. HIH-4602-A thermistor for temperature compensation  
5., 6. HIH-4602-C RTD for temperature compensation  
FIGURE 6. RH SENSOR CONSTRUCTION  
Sensor construction consists of a planar capacitor with a second polymer layer to protect against dirt, dust, oils and other hazards.  
Honeywell Sensing and Control  
5
HIH-4602-A/C Series  
FIGURE 7. TYPICAL APPLICATION CIRCUIT  
ORDER GUIDE  
Catalog Listing  
HIH-4602-A  
Description  
Monolithic IC humidity sensor with integral thermistor in TO-5 can  
Monolithic IC humidity sensor with integral precision RTD in TO-5 can  
HIH-4602-C  
FURTHER HUMIDITY SENSOR INFORMATION  
See the following associated literature at www.honeywell.com/sensing:  
Product installation instructions  
Application sheets:  
Humidity Sensor Performance Characteristics  
Humidity Sensor Theory and Behavior  
Humidity Sensor Moisture and Psychrometrics  
Thermoset Polymer-based Capacitive Sensors  
6
www.honeywell.com/sensing  
Humidity Sensors  
THIS PAGE INTENTIONALLY LEFT BLANK..  
Honeywell Sensing and Control  
7
WARNING  
MISUSE OF DOCUMENTATION  
WARNING  
PERSONAL INJURY  
The information presented in this product sheet is for  
reference only. Do not use this document as a product  
installation guide.  
DO NOT USE these products as safety or emergency stop  
devices or in any other application where failure of the  
product could result in personal injury.  
Complete installation, operation, and maintenance  
information is provided in the instructions supplied with  
each product.  
Failure to comply with these instructions could result  
in death or serious injury.  
Failure to comply with these instructions could result  
in death or serious injury.  
SALES AND SERVICE  
Honeywell serves its customers through a worldwide network  
of sales offices, representatives and distributors. For  
application assistance, current specifications, pricing or name  
of the nearest Authorized Distributor, contact your local sales  
office or:  
WARRANTY/REMEDY  
Honeywell warrants goods of its manufacture as being free of  
defective materials and faulty workmanship. Honeywell’s  
standard product warranty applies unless agreed to otherwise  
by Honeywell in writing; please refer to your order  
acknowledgement or consult your local sales office for specific  
warranty details. If warranted goods are returned to Honeywell  
during the period of coverage, Honeywell will repair or replace,  
at its option, without charge those items it finds defective. The  
foregoing is buyer’s sole remedy and is in lieu of all other  
warranties, expressed or implied, including those of  
merchantability and fitness for a particular purpose. In no  
event shall Honeywell be liable for consequential, special,  
or indirect damages.  
E-mail: info.sc@honeywell.com  
Internet: www.honeywell.com/sensing  
Phone and Fax:  
Asia Pacific  
+65 6±55-2828  
+65 6445-±0±± Fax  
+44 (0) 1698 481481  
+44 (0) 1698 481676 Fax  
+1-±05-805-8188  
+1-±05-88±-8257 Fax  
+1-800-5±7-6945  
Europe  
Latin America  
USA/Canada  
While we provide application assistance personally, through  
our literature and the Honeywell web site, it is up to the  
customer to determine the suitability of the product in the  
application.  
+1-815-2±5-6847  
+1-815-2±5-6545 Fax  
Specifications may change without notice. The information we  
supply is believed to be accurate and reliable as of this  
printing. However, we assume no responsibility for its use.  
Automation and Control Solutions  
Sensing and Control  
Honeywell  
1985 Douglas Drive North  
009022-1-EN IL50 GLO Printed in USA  
January 2007  
© 2007 Honeywell International Inc. All rights reserved.  
Minneapolis, MN 55422  
www.honeywell.com/sensing  

相关型号:

HIH-4602-L

HIH-4602 Series monolithic IC humidity sensor in TO-5 can
HONEYWELL

HIH-4602-L-CP

HIH-4602 Series monolithic IC humidity sensor in TO-5 can, calibration and data printout
HONEYWELL

HIH-5030

LOW VOLTAGE HUMIDITY SENSORS
HONEYWELL

HIH-5030-001

LOW VOLTAGE HUMIDITY SENSORS
HONEYWELL

HIH-5030-001S

LOW VOLTAGE HUMIDITY SENSORS
HONEYWELL

HIH-5031

LOW VOLTAGE HUMIDITY SENSORS
HONEYWELL

HIH-5031-001

LOW VOLTAGE HUMIDITY SENSORS
HONEYWELL

HIH-5031-001S

LOW VOLTAGE HUMIDITY SENSORS
HONEYWELL

HIH-6130

Honeywell HumidIcon? Digital Humidity/Temperature Sensors
HONEYWELL

HIH-6131

Honeywell HumidIcon? Digital Humidity/Temperature Sensors
HONEYWELL

HIH100

AUTO-RANGING INPUT AC-DC OPEN FRAME SINGLE & MULTI-OUTPUT 100 WATTS INTERNAL SWITCHING POWER SUPPLIES
HITRON

HIH100-10

AUTO-RANGING INPUT AC-DC OPEN FRAME SINGLE & MULTI-OUTPUT 100 WATTS INTERNAL SWITCHING POWER SUPPLIES
HITRON