HFD6340-001

更新时间:2024-09-18 18:22:44
品牌:HONEYWELL
描述:Photodiode Detector, 1200nm Min, 1650nm Max, 1250Mbps, SC Connector, Through Hole Mount

HFD6340-001 概述

Photodiode Detector, 1200nm Min, 1650nm Max, 1250Mbps, SC Connector, Through Hole Mount 光纤检测器

HFD6340-001 规格参数

生命周期:ActiveReach Compliance Code:unknown
风险等级:5.81主体高度:14.03 mm
主体长度或直径:4.34 mm内置特性:AMPLIFIER
通信标准:ATM连接类型:SC CONNECTOR
数据速率:1250 Mbps光纤设备类型:PHOTODIODE DETECTOR
光纤类型:SMF, MMF安装特点:THROUGH HOLE MOUNT
最高工作温度:70 °C最低工作温度:
最大工作波长:1650 nm最小工作波长:1200 nm
标称工作波长:1425 nm最大供电电压:3.6 V
最小供电电压:3 V标称供电电压:3.3 V
表面贴装:NOBase Number Matches:1

HFD6340-001 数据手册

通过下载HFD6340-001数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。

PDF下载
Fiber Optic LAN Components  
PIN Plus Preamplifier  
Preliminary  
HFD6X40-001  
FEATURES  
· LC Receptacle HFD6140-  
001  
· SC Receptacle HFD6340-  
001  
· High performance InGaAs  
PIN photodiode with  
separate transimpedance  
amplifier  
· Microwave Ceramic  
package capable of 20Ghz  
· Data rates from DC to  
12.5Gbps  
· Receive signal strength  
indicator  
· Low bias currents and  
voltages  
The HFD6X80-001 is a high-performance  
InGaAs PIN photodetector packaged with a transimpedance  
amplifier designed to meet performance requirements for 10GBps  
data communication over multimode optical fiber. Applications  
include Ethernet, Fibre Channel and ATM protocols. The optical  
assembly is designed to interface Single Mode Fiber.  
To achieve the full operational bandwidth, it is recommended  
that the products component leads be attached to within 0.010” of  
the receptacle with a controlled impedance path.  
The HFD6X80-001 incorporates a received signal strength  
indicator to facilitate optical link health monitoring.  
Honeywell VCSEL Products  
Preliminary  
Fiber Optic LAN Components  
PIN Plus Preamplifier  
Preliminary  
HFD6X40-001  
ABSOLUTE MAXIMUM RATINGS  
NOTICE  
Parameter  
Rating  
Stresses greater than those listed under  
Absolute Maximum Ratings” may cause  
permanent damage to the device. This is  
a stress rating only and functional  
operation of the device at these or any  
other conditions above those indicated in  
the operations section for extended  
periods of time may affect reliability.  
Storage Temperature  
Case Operating Temperature  
Lead Solder Temperature  
Power Supply Voltage  
Incident Optical Power  
-40 to +85°C  
0 to +85°C  
260°C, 10 sec.  
-0.3V to 5V  
0 dBm average, +4 dBm peak  
ELECTRO-OPTICAL CHARACTERISTICS (Vcc=3.3V, AC coupled to 50W, 0°C<T<70°C unless otherwise  
specified)  
Parameters  
Active Area  
Input Optical Wavelength 0oC to 70oC  
Test Condition  
Symbol Min.  
Typ.  
20  
Max.  
Units  
mm  
nm  
Notes  
1200  
1650  
500  
l P  
Responsivity  
PR =-12dBm.  
R
300  
400  
400  
500  
mV/mW  
V
1,2  
Differential Output  
Voltage Swing  
PR = -7dBm, AC Coupled to  
RL=50W  
Vo(pk-pk)  
600  
Supply Voltage  
Supply Current  
-3dB Optical/Electrical  
Bandwidth  
3.0  
8
3.3  
45  
9
3.6  
65  
13.2  
V
mA  
GHz  
ICC  
BW  
1
1,3  
PR =0mW peak, RL=50W  
PR =-12dBm  
Temp = 25oC  
Low Frequency –3dB  
Cutoff  
RMS Input Referred  
Noise Equivalent Power  
Power Supply Rejection  
Ratio  
PR =-12dBm  
BWLF  
NEP  
70  
150  
20  
KHz  
mW  
dB  
1,3  
4
7500 MHz, 4-pole BT Filter,  
PR=0uW (Dark)  
PR =0mW (Dark), Freq =  
1000MHz  
PSRR  
30  
1,8  
Pulse Width Distortion  
Rise/Fall Time  
RSSI Gain  
PR =-12dBm  
PR =-12dBm, (20%-80%)  
PIN < 200mW  
PIN > 200mW  
PR =-12dBm  
PWD  
TR/TF  
TBD  
50  
1500  
3000  
ps  
ps  
W
1,5  
1,6  
900  
1200  
10  
1200  
1800  
70  
RSSI Bandwidth  
kHz  
Notes:  
1.  
2.  
PR is the average optical power at the fiber face.  
8.  
Typical values represent measured data at 25oC.  
Responsivity measured with source wavelength of 1310nm, with  
light source modulated at 1000MHz.  
3.  
4.  
Bandwidth is measured with a small signal sinusoidal light source  
with –12dBm average power  
RMS input referred optical noise equivalent power is obtained by  
measuring the RMS output noise into a 7500 MHz, 4-pole Bessel-  
Thompson filter then dividing by the responsivity.  
Measured at the 50% level of output pulses.  
Rise/Fall times are corrected for optical source Rise/Fall times. The  
corrected value is calculated as the square root of the difference of  
the squares of the measured differential detector output and the  
source.  
NOTICE  
The inherent design of this component causes it to be sensitive  
to electrostatic discharge (ESD). To prevent ESD-induced  
damage and/or degradation to equipment, take normal ESD  
precautions when handling this product  
5.  
6.  
7.  
Value shown is with no external power supply filtering. Improved  
performance can be obtained by using external filtering close to the  
power supply leads.  
2 Honeywell · VCSEL Products Division Preliminary  
For application help: call 1-800-537-6945  
Fiber Optic LAN Components  
PIN Plus Preamplifier  
Preliminary  
HFD6X40-001  
RECOMMENDED INTERFACE CIRCUIT FOR THE HFD6X80-001  
Vcc  
HFD6X80  
10W  
VCC  
10nF  
Case Ground  
Limiting  
Data  
Amplifier  
or  
10nF  
50W T-Lines  
100W  
Test  
Equipment  
Data  
RSSI  
R=10 W  
C1 = 10 nF  
C2 = Data rate dependant (10nF for rates > 1Gbps)  
For application help: call 1-800-537-6945 Preliminary  
Honeywell · VCSEL Products Division 3  
Fiber Optic LAN Components  
PIN Plus Preamplifier  
Preliminary  
HFD6X40-001  
HFD6140-001  
Dimension in Inches [mm]  
4 Honeywell · VCSEL Products Division Preliminary  
For application help: call 1-800-537-6945  
Fiber Optic LAN Components  
PIN Plus Preamplifier  
Preliminary  
HFD6X40-001  
HFD6340-001  
Dimension in Inches [mm]  
For application help: call 1-800-537-6945 Preliminary  
Honeywell · VCSEL Products Division 5  
Fiber Optic LAN Components  
PIN Plus Preamplifier  
Preliminary  
HFD6X40-001  
SALES AND SERVICE  
ORDER GUIDE  
Honeywell VCSEL Optical Products  
serves its customers through a worldwide  
network of sales offices and distributors.  
For application assistance, current  
specifications, pricing or name of the  
nearest Authorized Distributor, contact a  
nearby sales office or call:  
Catalog Listing  
HFD6140-001  
HFD6340-001  
Description  
LC Receptacle, 850nm PIN Plus Preamplifier  
SC Receptacle, 850nm PIN Plus Preamplifier  
PINOUT  
TELEPHONE  
Number  
Function  
Vcc  
1
2
3
4
5
6
1-800-367-6786 (USA)  
1-800-737-3360 (Canada)  
+49 (0) 89 35813310 (Germany)  
+65-580-3312 (Singapore)  
+44 (0) 118 981 9511 (UK)  
GND  
DataP  
DataN  
GND  
RSSI  
FAX  
1-972-470-4326 (Customer Response  
Center)  
PIN 1  
1-972-470-4549 (Fax on demand)  
+49 (0) 89 3599971 (Germany)  
+65 445 3033 (Singapore)  
+44 (0) 118 981 7513 (UK)  
INTERNET  
http://www.honeywell.com/VCSEL  
WARRANTY/REMEDY  
Honeywell warrants goods of its manufacture as being free of defective  
materials and faulty workmanship. Commencing with the date of shipment,  
Honeywell’s warranty runs for 18 months. If warranted goods are returned to  
Honeywell during that period of coverage, Honeywell will repair or replace without  
charge those items it finds defective. The foregoing is Buyer’s sole remedy and is  
in lieu of all other warranties, expressed or implied, including those of  
merchantability and fitness for a particular purpose.  
vcsel@honeywell.com  
While we provide application assistance, personally and through our literature, it  
is up to the customer to determine the suitability of the product in the application.  
Specifications may change at any time without notice. The information we  
supply is believed to be accurate and reliable as of this printing. However, we  
assume no responsibility for its use.  
Last updated March 8, 2002  
Preliminary  
Printed with Soy Ink  
on 50% Recycled Paper  
VCSEL Products  
Honeywell Inc.  
Helping You Control Your World  
Optoelectronics Facility  
830 East Arapaho Road  
Richardson, Texas 75081  
006697-1-EN IL50 GLO 797 Printed in USA  

HFD6340-001 相关器件

型号 制造商 描述 价格 文档
HFD6340-202 HONEYWELL Photodiode Detector, 1250nm Min, 1600nm Max, 1250Mbps, SC Connector, Panel Mount, CERAMIC PACKAGE-8 获取价格
HFD6340-212 HONEYWELL Photodiode Detector, 1250nm Min, 1600nm Max, 1250Mbps, SC Connector, Panel Mount, CERAMIC PACKAGE-8 获取价格
HFD6380-001 HONEYWELL Photodiode Detector, 800nm Min, 870nm Max, 1250Mbps, SC Connector, Through Hole Mount 获取价格
HFD6380-202 HONEYWELL Photodiode Detector, 800nm Min, 870nm Max, 1250Mbps, SC Connector, Panel Mount, CERAMIC PACKAGE-8 获取价格
HFD6N40S SEMIHOW 400V N-Channel MOSFET 获取价格
HFD6N70U SEMIHOW 700V N-Channel MOSFET 获取价格
HFD6N70U_15 SEMIHOW 700V N-Channel MOSFET 获取价格
HFD7000-202 HONEYWELL Designed to meet industrial LAN (Local Area Network) specificatons 获取价格
HFD7000-212 HONEYWELL Designed to meet industrial LAN (Local Area Network) specificatons 获取价格
HFD7000-215 HONEYWELL Designed to meet industrial LAN (Local Area Network) specificatons 获取价格

HFD6340-001 相关文章

  • Bourns 密封通孔金属陶瓷微调电位计产品选型手册(英文版)
    2024-09-20
    6
  • Bourns 精密环境传感器产品选型手册(英文版)
    2024-09-20
    9
  • Bourns POWrTher 负温度系数(NTC)热敏电阻手册 (英文版)
    2024-09-20
    8
  • Bourns GMOV 混合过压保护组件产品选型手册(英文版)
    2024-09-20
    6