BZV6-2RN2 [HONEYWELL]
Snap Acting/Limit Switch, SPDT, Momentary, 0.5A, 125VDC, 10.34mm, Screw Terminal, Steel Roller Lever Plunger Actuator, Panel Mount-threaded,;
| 型号： | BZV6-2RN2 |
| 厂家： | 
Honeywell |
| 描述： | Snap Acting/Limit Switch, SPDT, Momentary, 0.5A, 125VDC, 10.34mm, Screw Terminal, Steel Roller Lever Plunger Actuator, Panel Mount-threaded, 开关 光电二极管 |
| 文件： | 总26页 (文件大小：2817K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
MICRO SWITCH™
Medium-Duty Limit Switches
E6/V6 Series
Datasheet
MICRO SWITCH™ E6/V6 Series
Medium-Duty Limit Switches
Honeywell MICRO SWITCH™ E6/V6 Series medium-duty limit switches are designed for a wide variety of indoor and
outdoor applications. Typical applications include equipment for commercial, industrial, transportation, and agriculture
industries. The electrostatic applied epoxy coating to the zinc housings enhance the durability of the product in most
environments. The E6/V6 family of switches incorporates the Honeywell MICRO SWITCH™ BZ switch element which
has the reliable snap-spring mechanism with more than 60 years of proven service.
The sealed (actuators with boots) E6/V6 Series switches are preferred for applications where there could be
exposure to liquid and/or particulate environments. The general purpose (actuators without boot seals) E6/V6 Series
switches are ideal for applications where there will not be exposure to liquid or dust environments.
The compact size of these limit switches permits installation where there is limited space available on equipment.
Most SPDT (Single Pole Double Throw) E6/V6 catalog listings are certified to UL, CSA, and CE while the DPDT
(Double Pole Double Throw) E6/V6 catalog listings are certified to UL and CSA.
What makes our switches better?
Designed with MICRO SWITCH™ BZ, BM, or DT basic switches
to deliver precise switching of electrical and mechanical operating
characteristics
High capacity (22 A) available with BME6 Series switch
Small footprint with easy access to wiring terminals
Available in a configuration suited to the application with variety of
actuators, circuitries, connectivities, and mounting options
HIGH PERFORMANCE • DURABILITY
CUSTOMIZATION • EASY TO INSTALL
sensing.honeywell.com
2
DESIGNED FOR DEMANDING ENVIRONMENTS AND
APPLICATIONS
Features
and Benefits
MICRO SWITCH™ E6/V6 Series switches feature an electrostatic epoxy coated
zinc housing for durability in most indoor and outdoor environments, and a wide
variety of actuators to solve most application requirements.
Side and flange mounting options
RELIABLY HANDLES ELECTRICAL LOADS
The E6/V6 Series are available with SPDT contacts with momentary or maintained
action, or DPDT contacts with momentary action. These switches also offer gold-
plated switch contacts for logic-level circuits and silver alloy contacts for power
duty circuits. The internal ground screw is provided to meet electrical codes as
required.
DESIGN FLEXIBILITY
These limit switches are offered with multiple connectivity options: three different
conduit offerings, four-pin “mini” style connector, pre-wired 16-gage four-
conductor cable, pigtail with three-pin Deutsch connector.
GLOBAL APPROVALS
E6/V6 Series switches are UL, CSA, and CE certified for most SPDT catalog
listings. The DPDT catalog listings are UL and CSA certified.
LOW TEMPERATURE OPTIONS
The E6/V6 Series’ standard temperature range is -32 °C to 71 °C [-25 °F to
160 °F] with an optional -40 °C [-40 °F] low temperature.
sensing.honeywell.com
3
Figure 1. MICRO SWITCH™ E6 Side Mount and V6 Flange Mount with Features and Options
Stainless steel roller
Wide choice of actuators and
operating characteristics
Diaphragm boot seal
for long life
Single or double pole switches
Rugged zinc housing and cover are phosphate treated and
epoxy coated for environmental durability
Multiple conduit options
for ease of
connectivity
Popular 25,4 mm [1 in] mounting pattern
Terminal screws of switch easily
accessed with cover removed
Captive cover screws (2)
Internal ground screw provided in cover
Cover with one-piece molded insulator seal
Figure 1A. E6 Side mount with boot sealed actuator (typical)
Wide choice of actuator styles and
operating characteristics
Hardened steel plunger for long life
Single or double pole switches
Rugged zinc housing and cover phosphate
treated and electrostatic epoxy coated
for environmental durability
Multiple conduit options
for ease
of connectivity
Terminal screws of switch easily
accessed with cover removed
Captive cover screws (2)
Internal ground screw provided in cover
Optional ꢀange base mounting
Cover with one-piece molded insulator seal
Figure 1B. V6 Flange mount without boot sealed actuator (typical)
sensing.honeywell.com
4
Potential Applications
INDUSTRIAL
• Packaging equipment (balers, door interlocks)
• Air curtains (control of air movement)
• Conveyors (diverters, gates)
TRANSPORTATION
• Construction machinery and equipment (door and panel interlocks)
• Rail maintenance equipment (door and panel interlocks, position sensing)
• Agricultural equipment (grain handling)
Table 1. Specifications
Characteristic
Parameter
top pin plunger (with and without boot seal)
top roller plunger, parallel with long axis of switch (with and without boot seal)
cross roller plunger, perpendicular with long axis of switch (with and without boot seal)
manually operated (with boot seal)
Actuators
roller arm, adjustable (with and without boot seal)
one-way roller lever (with boot seal)
low-force rod lever (with and without boot seal)
wobble (with boot seal)
manual reset switches: top pin plunger, top roller plunger, adjustable roller arm, wobble
Housing material
Termination
electrostatic epoxy coated zinc die-cast
see table 2 below
actuator with boot seal: NEMA 1, 3, 4, IP66
actuator without seal boot: NEMA 1, IP40
Sealing
SPDT (snap-action contacts, 1NO/1NC)
SPDT-DB (double break snap-action contacts, 1NO/1NC)
DPDT (snap-action contacts, 2NO/2NC)
Switching options
Mechanical endurance
Electrical endurance
up to five million cycles for BZx6 and BMx6 switches; up to two million cycles for DTx6 switches
up to 50K cycles at full rated load
-32 °C to 71 °C [-25 °F to 160 °F] (standard)
-40 °C to 71 °C [-40 °F to 160 °F] (optional low temperature)
Operating temperature
Agency approvals
UL, CSA, CE
Table 2. Terminations
Catalog Listing Suffixes
Description
none
S
0.5 - 14 NPT conduit thread
0.5 - 14 NPSM conduit thread
M20 - 1,5 mm conduit thread
four-pin “mini” style connector
M
R
F1
F3
305 mm [12 in] pigtail STOW-A, three conductor, 16-gage cable with three-pin Deutsch connector
914 mm [36 in] 16-gage, four-conductor STO, PVC jacketed cable
sensing.honeywell.com
5
E6/V6 Series
Table 3. Electrical Ratings
Rating Code
UL, CSA Rating
CE Rating
15 A @ 125 Vac, 250 Vac or 480 Vac; 2 A @ 600 Vac;
1/8 HP @ 125 Vac, 1/4 HP @ 250 Vac;
EN60947-5-1, IEC60947-5-1
AC15, B300
A
B
C
0.5 A @ 125 Vdc, 0.25 A @ 250 Vdc
10 A @ 125 Vac, 250 Vac
0.3 A @ 125 Vdc, 0.15 A @ 250 Vdc
–
15 A @125 Vac, 250 Vac or 480 Vac;
1/4 HP @ 125 Vac, 1/2 HP @ 250 Vac;
0.5 A @ 125 Vdc, 0.25 A @ 250 Vdc
EN60947-5-1, IEC60947-5-1
AC15, B300
8 A @ 125 Vac, 250 Vac or 480 Vac; 2 A @ 600 Vac;
1/8 HP @ 125 Vac, 1/4 HP @ 250 Vac;
0.5 A @ 125 Vdc, 0.25 A @ 250 Vdc
EN60947-5-1, IEC60947-5-1
AC15, B300
D
E
F
10 A @ 125 Vac, 250 Vac or 480 Vac; 2 A @ 600 Vac;
1/8 HP @ 125 Vac, 1/4 HP @ 250 Vac;
EN60947-5-1, IEC60947-5-1
AC15, B300
0.5 A @ 125 Vdc, 0.25 A @ 250 Vdc
15 A @125 Vac, 250 Vac or 480 Vac;
1/4 HP @ 125 Vac, 1/2 HP @ 250 Vac;
1.0 A @ 125 Vdc, 0.5 A @ 250 Vdc
EN60947-5-1, IEC60947-5-1
AC15, B300
22 A @125 Vac, 250 Vac or 480 Vac;
1/4 HP @ 125 Vac, 1/2 HP @ 250 Vac;
0.5 A @ 125 Vdc, 0.25 A @ 250 Vdc
G
H
–
IEC 61058-1
1A, 250 Vac
1A @ 125 Vac (Gold-plated contacts)
Table 4. CE Electrical Rating, EN60947-5-1, IEC 60947-5-1
Designation &
Continuous
Current (A)
Vac
Amps Make
Amps Break
VA Rating Make
VA Rating Break
Category
AC15, B300
AC15, B300
120
240
30
15
3.0
1.5
5
5
3600
3600
360
360
Table 5. Switching
SPDT
DPDT
SPDT-DB
NC
NO
C
NC
NO
NC
NO
NC
NO
C
NC
NO
C
sensing.honeywell.com
6
MICRO SWITCH™ Medium-Duty Limit Switches
PRODUCT NOMENCLATURE
BZ
E6
—
2
R
N
Additional
Modifications
Actuator
Internal Basic
Switch Construction
Enclosure
Type
Plunger
Type
Modifications3
Switch Type
Contact
BZ Series
Basic Switch
SPDT, 15 A
For use with “X” actuator,
0.5-14 NPT
Standard
(Single-break)
Pin plunger
maintained contact2
R
N
Q
conduit thread
Side mount
Seal boot
E6
V6
(blank)
(blank)
(blank)
Pre-leaded, 3 ft
cable, conduit
area epoxy sealed
Maintained
Double-break
(BZ basic switch only)
Flange mount
Standard
No seal boot
contact with
C3
2
A
X
reset plunger2
12-inch pigtail
DT Series
Basic Switch
DPDT, 10 A
Adjustable
Special2
cable with 3-pin
Deutsch connect.
7
2
F1
F3
roller lever
Epoxy sealed,
3 ft of cable
Manual, palm
button
NOTE:
4
1. Not all combinations of model codes are available.
Contact your Honeywell rep or distributor for assistance.
2. BZ Series only.
3. More than one actuator modification may be permissible.
For example, BZE6-2RN8034 is a roller plunger with low temperature seals.
Epoxy sealed,
5 ft of cable
BM Series
Basic Switch
SPDT, 22 A
#8 mounting
screws
7
F5
F6
Epoxy sealed,
6 ft of cable
8
Roller plunger
80
Epoxy sealed,
4-pin “mini style”
connector
Coil spring
wobble stick
FR
R
18
One-way
roller lever
4-pin “mini style”
connector
28
1/4-14 NPSM
conduit threads
Low temp.
34
S
M20 x 1,5 mm
conduit thread
Rod
lever
M
62
72 Gold-contact
switch
722
Cross
roller plunger
81
sensing.honeywell.com
7
E6/V6 Series
Table 6. Order Guide • E6 Series Switches, Side Mount with Boot Seal
For catalog listings not shown, please contact your Honeywell distributor or representative.
Catalog Listing
Comments
BZ,
SPDT 15 A
A,
2,50 to 6,67 43,66 0,76
[9 to 24] [1.719 0.030] [0.078]
1,98
5,56
[0.219]
0,05
[0.002]
BZE6-2RN
12 in. pigtail, 3
wire STO cable w/
Deutsch connector
BZ, E,
SPDT 10 A
2,50 to 6,67 43,66 0,76
[9 to 24] [1.719 0.030] [0.078]
1,98
5,56
[0.219]
0,05
[0.002]
BZE6-2RN-F1
Epoxy sealed with
36 in. 4 wire STO
cable
BZ,
SPDT 10 A
E,
2,50 to 6,67 43,66 0,76
[9 to 24] [1.719 0.030] [0.078]
1,98
5,56
[0.219]
0,05
[0.002]
BZE6-2RN-F3
BZ, A,
SPDT 15 A
2,50 to 6,67 43,66 0,76
1,98
5,56
[0.219]
0,05
[0.002]
M20-1,5 conduit
thread
BZE6-2RN-M
BZE6-2RN-R
BZE6-2RN-S
BZE6-2RN7
BZE6-2RN34
BZE6-2RN72
[9 to 24] [1.719 0.030] [0.078]
2,50 to 6,67 43,66 0,76 1,98
[9 to 24] [1.719 0.030] [0.078]
2,50 to 6,67 43,66 0,76 1,98
[9 to 24] [1.719 0.030] [0.078]
2,50 to 6,67 43,66 0,76 1,98
[9 to 24] [1.719 0.030] [0.078]
2,50 to 6,67 43,66 0,76 1,98
[9 to 24] [1.719 0.030] [0.078]
2,50 to 6,67 43,66 0,76 1,98
[9 to 24] [1.719 0.030] [0.078]
BZ,
SPDT
D,
8 A
5,56
[0.219]
0,05
[0.002]
4-pin "mini" style
connector
BZ,
A,
5,56
[0.219]
0,05
[0.002]
0.5-14 NPSM
conduit thread
SPDT 15 A
BZ, A,
SPDT 15 A
BZ, A,
SPDT 15 A
5,56
[0.219]
0,05
[0.002]
#8 mounting screws
Pin Plunger
5,56
[0.219]
0,05
[0.002]
Low temperature
-40 °C [-40 °F]
BZ,
SPDT
H,
1 A
5,56
[0.219]
0,05
[0.002]
Gold-plated
contacts
BZ,
SPDT,
Double 15 A
break
F,
2,50 to 6,67 43,66 0,76
[9 to 24] [1.719 0.030] [0.078]
1,98
5,56
[0.219]
0,05
[0.002]
Recommended for
dc applications
BZE6-2AN
BM,
SPDT 22 A
DT, B,
DPDT 10 A
BZ, A,
SPDT 15 A
BZ, A,
SPDT 15 A
DT, B,
DPDT 10 A
G,
2,50 to 6,67 43,66 0,76
[9 to 24] [1.719 0.030] [0.078]
7,23 to 16,4 46,02 0,76 2,80
[26 to 59] [1.812 0.030] [0.110]
1,98
5,56
[0.219]
0,05
[0.002]
Higher current ac
applications
BME6-2RN
DTE6-2RN
3,17
[0.125]
1,52
[0.060]
Double pole
applications
2,50 to 6,67
[9 to24]
56,7 1,14
[2.232 0.045] [0.078]
56,7 1,14 1,98
[2.232 0.045] [0.078]
59,6 1,0 2,80
1,98
5,56
[0.219]
0,05
[0.002]
BZE6-2RN80
BZE6-2RN8034
DTE6-2RN80
2,50 to 6,67
[9 to24]
5,56
[0.219]
0,05
[0.002]
Low temperature
-40 °C [-40 °F]
5,56 to 13,3
3,17
[0.125]
1,52
[0.060]
Double pole
applications
[20 to 48] [2.345 0.040] [0.110]
Low temp. -40 °C
[-40 °F], M20 -1,5
[0.060] conduit, Double pole
applications
Inline Roller Plunger
DTE6-
2RN8034-M
DT,
B,
5,56 to 13,3
[20 to 48] [2.345 0.040] [0.110]
59,6 1,0
2,80
3,17
[0.125]
1,52
DPDT 10 A
BZ,
SPDT 15 A
A,
2,50 to 6,67
[9 to24]
56,7 1,14
[2.232 0.045] [0.078]
1,98
5,56
[0.219]
0,05
[0.002]
BZE6-2RN81
Cross Roller
Plunger
sensing.honeywell.com
8
MICRO SWITCH™ Medium-Duty Limit Switches
Table 6, continued. Order Guide • E6 Series Switches, Side Mount with Boot Seal
For catalog listings not shown, please contact your Honeywell distributor or representative.
Catalog Listing
Comments
BZ,
SPDT 15 A
BZ, A,
SPDT 15 A
BZ, A,
SPDT 15 A
A,
2,78 to 5,57
[10 to 20]
71,42 Ref
[2.812]
4,83
[0.188]
5,56
[0.219]
0,15
[0.006]
BZE6-2RN2
BZE6-2RN2-S
BZE6-2RN234
BZE6-2RN272
DTE6-2RN2
2,78 to 5,57
[10 to 20]
71,42 Ref
[2.812]
4,83
[0.188]
5,56
[0.219]
0,15
[0.006]
0.5-14 NPSM
conduit thread
2,78 to 5,57
[10 to 20]
71,42 Ref
[2.812]
4,83
[0.188]
5,56
[0.219]
0,15
[0.006]
Low temperature
-40 °C [-40 °F]
BZ,
SPDT
H,
1 A
2,78 to 5,57
[10 to 20]
71,42 Ref
[2.812]
4,83
[0.188]
5,56
[0.219]
0,15
[0.006]
Gold-plated
contacts
Roller Lever
DT,
B,
2,78 to 8,35
[10 to 30]
69,44 Ref
[2.734]
6,76
[0.266]
5,56
[0.219]
4,19
[0.165]
Double pole
applications
DPDT 10 A
BZ, A,
SPDT 15 A
2,22 to 5,56
[8 to 20]
5,94
[0.234]
5,56
[0.219]
0,15
[0.006]
BZE6-2RN28
BZE6-2RN28-S
DTE6-2RN28
-
-
-
BZ,
A,
2,22 to 5,56
[8 to 20]
5,94
[0.234]
5,56
[0.219]
0,15
[0.006]
0.5-14 NPSM
conduit thread
SPDT 15 A
DT,
B,
5,56 to10
[20 to 36]
7,92
[0.312]
5,56
[0.219]
4,19
[0.165]
Double pole
applications
One-way Roller
Lever
DPDT 10 A
BZ,
SPDT 15 A
A,
0,83 to 1,95
[3 to 7]
18,24
[0.718]
21,29
[838]
5,82
[0.229]
BZE6-2RN62
-
Low-force Rod
Lever
1,95 N max.
[7.0 oz
BZ,
SPDT 15 A
A,
BZE6-2RN18
-
-
15°
15°
20° Ref
20° Ref
-
-
max.]
1,95 N max.
[7.0 oz
BZ,
SPDT
H,
1 A
Gold-plated
contacts
BZE6-2RN1872
max.]
Coil-spring Wobble
Manual Palm Button
BZ,
SPDT 15 A
A,
2,78 to 5,57
[10 to 20]
4,83
[0.188]
5,56
[0.219]
0,15
[0.006]
BZE6-2RN4
80,0 Ref [3.15]
sensing.honeywell.com
9
E6/V6 Series
Table 6. continued. Order Guide • E6 Series Switches, Side Mount with Boot Seal
For catalog listings not shown, please contact your Honeywell distributor or representative.
Catalog Listing
Comments
BZ,
SPDT 15 A
A,
1,67 to 5,56 43,64 0,76
1,98
5,56
[0.219]
Reset position:
53,19 [2.094] max.
BZE6-RNX1
NA
NA
[6 to 20]
[1.718 0.030] [0.078]
Pin Plunger w
Manual Reset
56,70 1,14
1,98
BZ,
SPDT 15 A
A,
5,85 to 15,57
[21 to 56]
4,75
[0.187]
Reset position:
53,19 [2.094] max.
BZE6-RN80X2
[2.232
[0.078]
0.045]
Inline roller plunger
w/ manual reset
Reset position:
50,40 1,14
[1.984 0.045]
BZ,
A,
4,45 N max.
71,42 Ref
[2.812 in.]
4,83
[0.188]
5,56
[0.219]
BZE6-RN2X1
NA
SPDT 15 A [16 oz max.]
Roller Lever w/
Manual Reset
Reset position:
50,40 1,14
[1.984 0.045]
BZ,
A,
1,95 N max.
BZE6-RN18X1
-
15°
20° Ref
NA
SPDT 15 A [7.0 oz max.]
Coil Spring Wobble
w/ Manual Reset
sensing.honeywell.com
10
MICRO SWITCH™ Medium-Duty Limit Switches
DIMENSIONS
Figure 2.Top pin plunger, side mount with boot seal
Figure 3.Top roller plunger, side mount with boot seal
Ø 8,44 mm
[Ø 0.33 in]
ref. 2,0 mm
[ref. 0.08 in]
23,4 mm
[0.92 in]
Ø12,7 mm [0.50 in] x
4,6 mm [0.18 in] W
roller
1/2-14 NPT
Threads
56,64 mm
[2.23 in]
43,7 mm OP
[1.72 in OP]
1/2-14 NPT
Threads
25,4 mm
[1.00 in]
22,6 mm
[0.89 in]
25,4 mm
22,6 mm
[1.00 in]
[0.89 in]
25,4 mm [1.00 in]
25,4 mm
[1.00 in]
77,2 mm
[3.04 in]
25,4 mm
[1.00 in]
25,4 mm [1.00 in]
21,1 mm
[0.83 in]
69,6 mm
[2.74 in]
21,1 mm
[0.83 in]
Figure 4. Cross roller plunger, side mount with boot seal
Figure 5. Roller lever, adjustable, side mount with boot seal
Ø 19,0 mm [0.75 in] x
6,4 mm [0.25 in] W
Ø12,7 mm [0.50 in] x
4,6 mm [0.18 in] W
roller
39,6 mm
roller
[1.57 in]
18,3 mm
[0.72 in]
56,64 mm
1/2-14 NPT
[2.23 in]
23,1 mm
[0.91 in]
Threads
53,1 mm
[2.09 in]
1/2-14 NPT
Threads
25,4 mm
22,6 mm
[1.00 in]
[0.89 in]
25,4 mm [1.00 in]
25,4 mm
[1.00 in]
69,6 mm [2.74 in]
77,2 mm [3.04 in]
25,4 mm
[1.00 in]
22,6 mm
[0.89 in]
25,4 mm
[1.00 in]
25,4 mm [1.00 in]
69,6 mm [2.74 in]
Figure 7. Rod lever, side mount with boot seal
Figure 6. One-way roller lever, side mount with boot seal
152,4 mm [6.0 in]
Ø 19,0 mm [0.75 in] x
6,4 mm [0.25 in] W
18,3 mm
[0.72 in]
roller
18,3 mm
[0.72 in]
32,26 mm
[1.27 in]
53,1 mm
[2.09 in]
1/2-14 NPT
Threads
53,1 mm
[2.09 in]
1/2-14 NPT
Threads
25,4 mm
[1.00 in]
22,6 mm
[0.89 in]
25,4 mm
22,6 mm
[1.00 in]
[0.89 in]
25,4 mm [1.00 in]
25,4 mm
[1.00 in]
69,6 mm [2.74 in]
77,2 mm [3.04 in]
25,4 mm [1.00 in]
69,6 mm [2.74 in]
25,4 mm
77,2 mm [3.04 in]
[1.00 in]
sensing.honeywell.com
11
E6/V6 Series
Figure 8. Manual palm button, side mount with boot seal
Figure 9. Coil wobble, side mount with boot seal
Ø 7,11 mm [Ø 0.28 in]
36,58 mm [1.44 in]
38,1 mm
18,3 mm
[0.72 in]
[1.50 in]
108,97 mm
[4.29 in]
31,75 mm
[1.25 in]
149,35 mm
[5.88 in]
1/2-14 NPT
Threads
53,1 mm
[2.09 in]
1/2-14 NPT
Threads
25,4 mm
22,6 mm
[1.00 in]
25,4 mm
22,6 mm
[0.89 in]
[1.00 in]
[0.89 in]
25,4 mm
[1.00 in]
25,4 mm [1.00 in]
69,6 mm [2.74 in]
25,4 mm [1.00 in]
25,4 mm
[1.00 in]
77,2 mm [3.04 in]
69,6 mm [2.74 in]
77,2 mm [3.04 in]
Figure 10.Top pin plunger, reset, side mount with boot seal
Figure 11.Top roller plunger, reset, side mount with boot seal
Ø 8,44 mm
[Ø 0.33 in]
Ø12,7 mm [0.50 in] x
4,6 mm [0.18 in] W
roller
56,64 mm
[2.23 in]
1/2-14 NPT
Threads
1/2-14 NPT
Threads
22,6 mm
[0.89 in]
22,6 mm
[0.89 in]
25,4 mm
25,4 mm
[1.00 in]
25,4 mm
25,4 mm
[1.00 in]
[1.00 in]
[1.00 in]
69,6 mm [2.74 in]
69,6 mm [2.74 in]
77,2 mm [3.04 in]
77,2 mm [3.04 in]
Figure 12. Roller lever plunger, reset, side mount with boot seal Figure 13. Coil wobble plunger, reset, side mount with boot seal
Ø 7,11 mm [Ø 0.28 in]
Ø 19,0 mm [0.75 in] x
6,4 mm [0.25 in] W
39,6 mm
roller
[1.57 in]
18,3 mm
[0.72 in]
108,97 mm
[4.29 in]
23,1 mm
[0.91 in]
149,35 mm
[5.88 in]
53,1 mm
[2.09 in]
1/2-14 NPT
Threads
1/2-14 NPT
Threads
22,6 mm
[0.89 in]
22,6 mm
[0.89 in]
25,4 mm
[1.00 in]
25,4 mm
[1.00 in]
25,4 mm
[1.00 in]
25,4 mm
[1.00 in]
69,6 mm [2.74 in]
77,2 mm [3.04 in]
69,6 mm [2.74 in]
77,2 mm [3.04 in]
sensing.honeywell.com
12
MICRO SWITCH™ Medium-Duty Limit Switches
Table 7. Order Guide • E6 Series Switches, Side Mount without Boot Seal
For catalog listings not shown, please contact your Honeywell distributor or representative.
Catalog Listing
Comments
BZ,
SPDT 15 A
BZ, A,
SPDT 15 A
BZ, A,
SPDT 15 A
A,
2,50 to 3,61
[9 to 13]
38,1 0,76
[1.5 0.030]
38,1 0,76
[1.5 0.030]
38,1 0,76
[1.5 0.030]
38,1 0,76
[1.5 0.030]
38,1 0,76
[1.5 0.030]
0,38
[0.015]
0,38
[0.015]
0,38
[0.015]
0,38
[0.015]
0,38
5,56
[0.219]
5,56
[0.219]
5,56
[0.219]
5,56
[0.219]
5,56
[0.219]
2,24
[0.088]
3,56
[0.140]
3,56
[0.140]
3,56
[0.140]
3,56
[0.140]
3,56
[0.140]
3,56
[0.140]
0,05
[0.002]
0,05
[0.002]
0,05
[0.002]
0,05
[0.002]
0,05
[0.002]
1,52
[0.060]
0,05
[0.002]
0,05
[0.002]
0,05
[0.002]
0,05
[0.002]
0,05
[0.002]
0,05
[0.002]
BZE6-2RQ
BZE6-2RQ-S
BZE6-2RQ7
BZE6-2RQ72
BME6-2RQ
2,50 to 3,61
[9 to 13]
0.5-14 NPSM
conduit thread
2,50 to 3,61
[9 to 13]
#8 mounting screws
BZ,
SPDT
BM,
H,
1 A
G,
2,50 to 3,61
[9 to 13]
Gold-plated
contacts
Pin Plunger
2,50 to 3,61
[9 to 13]
Higher current ac
applications
Double pole
applications
SPDT 22 A
DT, B,
DPDT 10 A
BZ, A,
SPDT 15 A
BZ, A,
SPDT 15 A
[0.015]
3,81
5,56 to 11,12 47,88 0,76
[20 to 40]
2,50 to 3,61 49,61 1,14
[9 to 13] [1.953 0.045] [0.015]
2,50 to 3,61 49,61 1,14 0,38
[9 to 13] [1.953 0.045] [0.015]
2,50 to 3,61 49,61 1,14 0,38
[9 to 13] [1.953 0.045] [0.015]
2,50 to 3,61 49,61 1,14 0,38
[9 to 13] [1.953 0.045] [0.015]
2,50 to 3,61 49,61 1,14 0,38
[9 to 13] [1.953 0.045] [0.015]
2,50 to 3,61 49,61 1,14 0,38
[1.953 0.045] [0.015]
DTE6-2RQ
[1.885 0.030] [0.150]
0,38
BZE6-2RQ8
BZE6-2RQ8-S
BZE6-2RQ8722
BZE6-2RQ81
BZE6-2RQ81-S
BME6-2RQ81
0.5-14 NPSM
conduit thread
Gold-plated
contacts
BZ,
SPDT
BZ,
H,
1 A
A,
Inline Roller Plunger
SPDT 15 A
BZ, A,
SPDT 15 A
BM, G,
SPDT 22 A
0.5-14 NPSM
conduit thread
Higher current ac
applications
[9 to 13]
6,67 to
13,34
Cross Roller
Plunger
DT,
B,
49,61 1,14
[1.953 0.045] [0.141]
3,58
3,18
[0.125]
1,52
[0.060]
Double pole
applications
DTE6-2RQ81
DPDT 10 A
[24 to 48]
2,78 to 5,00
[10 to 18]
2,78 to 5,00
[10 to 18]
2,78 to 5,57
[10 to 20]
BZ,
SPDT 15 A
BZ, A,
SPDT 15 A
DT, B,
DPDT 10 A
A,
61,11 Ref
[2.406]
4,83
[0.188]
4,83
[0.188]
6,76
5,56
[0.219]
5,56
[0.219]
5,56
0,15
[0.006]
0,15
[0.006]
4,19
BZE6-2RQ2
BZE6-2RQ2-S
DTE6-2RQ2
61,11 Ref
[2.406]
0.5-14 NPSM
conduit thread
Double pole
applications
69,44 Ref
[2.734]
Roller Lever
[0.266]
[0.219]
[0.165]
BZ,
SPDT 15 A
A,
2,22 to 5,00
[8 to 18]
5,94
[0.234]
5,56
[0.219]
0,15
[0.006]
BZE6-2RQ28
-
One-way Roller
Lever
BZ,
SPDT 15 A
BZ, A,
SPDT 15 A
DT, B,
DPDT 10 A
A,
0,56 to 1,39
[2 to 5]
18,24
[0.718]
18,24
[0.718]
27,94
21,29
[0.838]
21,29
[0.838]
21,29
5,82
[0.229]
5,82
[0.229]
14,22
[0.560]
BZE6-2RQ62
BZE6-2RQ62-S
DTE6-2RQ62
-
-
-
0,56 to 1,39
[2 to 5]
0.5-14 NPSM
conduit thread
Double pole
applications
1,39 to 3,34
[5 to 12]
Low-force Rod
Lever
[1,100]
[0.838]
sensing.honeywell.com
13
E6/V6 Series
Table 7, continued. Order Guide • E6 Series Switches, Side Mount without Boot Seal
For catalog listings not shown, please contact your Honeywell distributor or representative.
Catalog Listing
Comments
BZ,
SPDT 15 A
A,
2,78 to 5,00
[10 to 18]
5,56
[0.219]
0,15
[0.006]
BZE6-2RQ4
BZE6-RQX2
-
-
Manual Palm Button
BZ,
SPDT 15 A
A,
1,67 to 2,64
[6 to 9.5]
38,1 0,76
[1.5 0.030]
0,30
[0.012]
4,75
[0.187]
Reset position:
46,84 [1.844] max.
NA
NA
Pin Plunger w
Manual Reset
BZ,
SPDT 15 A
A,
1,47 to 2,64 51,18 1,14
[6 to 9.5]
0,30
3,56
[0.140]
Reset position:
46,84 [1.844] max.
BZE6-RQ8X2
[2.015 0.045] [0.012]
Inline Roller Plunger
w/ Manual Reset
BZ,
SPDT 15 A
A,
1,47 to 2,64 51,18 1,14
0,30
3,56
[0.140]
Reset position:
46,84 [1.844] max.
BZE6-RQ81X2
NA
[6 to 9.5]
[2.015 0.045] [0.012]
Cross Roller
Plunger w/ Manual
Reset
3,34
approx.
[12 oz ]
BZ,
SPDT 15 A
A,
61,11 Ref
[2.406]
4,83
[0.188]
5,56
[0.219]
Reset position:
46,84 [1.844] max.
BZE6-RQ2X2
NA
Roller Lever w/
Manual Reset
sensing.honeywell.com
14
MICRO SWITCH™ Medium-Duty Limit Switches
DIMENSIONS
Figure 14.Top pin plunger, side mount
Figure 15.Top roller plunger, side mount
Ø 8,44 mm
[Ø 0.33 in]
Ø12,7 mm [0.50 in] x
4,6 mm [0.18 in] W
roller
23,4 mm
[0.92 in]
1/2-14 NPT
Threads
49,61 mm
[1.95 in]
1/2-14 NPT
Threads
38,1 mm
[1.50 in]
25,4 mm
[1.00 in]
22,6 mm
[0.89 in]
25,4 mm
[1.00 in]
22,6 mm
[0.89 in]
25,4 mm [1.00 in]
25,4 mm [1.00 in]
77,2 mm
[3.04 in]
25,4 mm
[1.00 in]
69,6 mm
[2.74 in]
25,4 mm
[1.00 in]
77,2 mm [3.04 in]
Figure 17. Roller lever, adjustable, side mount
Figure 16. Cross roller plunger, side mount
Ø 19,0 mm [0.75 in] x
6,4 mm [0.25 in] W
Ø12,7 mm [0.50 in] x
4,6 mm [0.18 in] W
39,6 mm
roller
[1.57 in]
roller
49,61 mm
[1.95 in]
1/2-14 NPT
Threads
18,3 mm
[0.72 in]
23,1 mm
[0.91 in]
1/2-14 NPT
42,9 mm
25,4 mm
[1.00 in]
Threads
[1.69 in]
22,6 mm
[0.89 in]
25,4 mm [1.00 in]
25,4 mm
[1.00 in]
69,6 mm [2.74 in]
77,2 mm [3.04 in]
25,4 mm
22,6 mm
[1.00 in]
[0.89 in]
25,4 mm [1.00 in]
69,6 mm [2.74 in]
25,4 mm
[1.00 in]
77,2 mm [3.04 in]
Figure 18. One-way roller lever, side mount
Figure 19. Rod lever, side mount
152,4 mm [6.0 in]
Ø 19,0 mm [0.75 in] x
6,4 mm [0.25 in] W
roller
18,3 mm
[0.72 in]
18,3 mm
[0.72 in]
32,26 mm
[1.27 in]
1/2-14 NPT
Threads
42,93 mm
[1.69 in]
42,93 mm
[1.69 in]
1/2-14 NPT
Threads
25,4 mm
[1.00 in]
22,6 mm
[0.89 in]
25,4 mm
[1.00 in]
22,6 mm
[0.89 in]
25,4 mm [1.00 in]
25,4 mm
[1.00 in]
69,6 mm [2.74 in]
77,2 mm [3.04 in]
25,4 mm [1.00 in]
25,4 mm
[1.00 in]
69,6 mm [2.74 in]
77,2 mm [3.04 in]
sensing.honeywell.com
15
E6/V6 Series
Figure 20. Manual palm button, side mount
Figure 21.Top pin plunger, reset, side mount
Ø 8,44 mm
[Ø 0.33 in]
38,1 mm
[1.50 in]
18,3 mm
[0.72 in]
1/2-14 NPT
Threads
31,75 mm
[1.25 in]
1/2-14 NPT
Threads
42,93 mm
[1.69 in]
22,6 mm
[0.89 in]
25,4 mm
[1.00 in]
22,6 mm
[0.89 in]
25,4 mm
[1.00 in]
25,4 mm
[1.00 in]
25,4 mm [1.00 in]
25,4 mm
[1.00 in]
69,6 mm [2.74 in]
69,6 mm [2.74 in]
77,2 mm [3.04 in]
77,2 mm [3.04 in]
Figure 22. Roller plunger, reset, side mount
Figure 23. Cross roller plunger, reset, side mount
Ø12,7 mm [0.50 in] x
4,6 mm [0.18 in] W
roller
1/2-14 NPT
Threads
49,61 mm
[1.95 in]
1/2-14 NPT
Threads
22,6 mm
[0.89 in]
22,6 mm
[0.89 in]
25,4 mm
[1.00 in]
25,4 mm
[1.00 in]
25,4 mm
[1.00 in]
25,4 mm
[1.00 in]
69,6 mm [2.74 in]
77,2 mm [3.04 in]
69,6 mm [2.74 in]
77,2 mm [3.04 in]
Figure 24. Roller lever, reset, side mount
Ø 19,0 mm [0.75 in] x
6,4 mm [0.25 in] W
roller
39,6 mm
[1.57 in]
18,3 mm
[0.72 in]
23,1 mm
[0.91 in]
1/2-14 NPT
Threads
42,9 mm
[1.69 in]
22,6 mm
[0.89 in]
25,4 mm
[1.00 in]
25,4 mm
[1.00 in]
69,6 mm [2.74 in]
77,2 mm [3.04 in]
sensing.honeywell.com
16
MICRO SWITCH™ Medium-Duty Limit Switches
Table 8. Order Guide • V6 Series Switches, Flange Mount with Boot Seal
For catalog listings not shown, please contact your Honeywell distributor or representative.
Catalog Listing
Comments
BZ,
SPDT 15 A
BZ, A,
SPDT 15 A
BZ, A,
SPDT 15 A
DT, B,
DPDT 10 A
A,
2,50 to 6,67 69,09 1,52
[9 to 24] [2.720 0.060] [0.078]
2,50 to 6,67 69,09 1,52 1,98
[9 to 24] [2.720 0.060] [0.078]
2,50 to 6,67 69,09 1,52 1,98
[9 to 24] [2.720 0.060] [0.078]
7,23 to 16,4 71,42 0,76 2,79
[26 to 59] [2.812 0.030] [0.110]
1,98
5,56
[0.219]
5,56
[0.219]
5,56
[0.219]
3,18
[0.125]
0,05
[0.002]
0,05
[0.002]
0,05
[0.002]
1,52
[0.060]
BZV6-2RN
BZV6-2RN-S
BZV6-2RN34
DTV6-2RN
0.5-14 NPSM
conduit thread
Low temperature
-40 °C [-40 °F]
Double pole
Pin plunger
applications
BZ,
SPDT 15 A
A,
2,50 to 6,67 82,09 1,14
[9 to24] [3.232 0.045] [0.078]
1,98
5,56
[0.219]
0,05
[0.002]
BZV6-2RN80
BZV6-2RN81
Inline Roller Plunger
BZ,
SPDT 15 A
A,
2,50 to 6,67 82,09 1,14
1,98
5,56
[0.219]
0,05
[0.002]
[9 to24]
[3.232 0.045] [0.078]
Cross Roller
Plunger
BZ,
SPDT 15 A
A,
2,78 to 5,57
[10 to 20]
96,82 Ref
[3.812]
4,83
[0.188]
5,56
[0.219]
0,15
[0.006]
BZV6-2RN2
DTV6-2RN2
DT,
B,
2,78 to 8,35
[10 to 30]
94,84 Ref
[3.734]
6,76
[0.266]
5,56
[0.219]
4,19
[0.165]
Double pole
applications
DPDT 10 A
Roller Lever
BZ,
SPDT 15 A
A,
2,22 to 5,56
[8 to 20]
5,94
[0.234]
5,56
[0.219]
0,15
[0.006]
BZV6-2RN28
BZV6-2RN62
-
-
One-way Roller
Lever
BZ,
SPDT 15 A
A,
0,83 to 1,95
[3 to 7]
18,24
[0.718]
21,29
[0.838]
5,82
[0.229]
Low-force Rod
Lever
sensing.honeywell.com
17
E6/V6 Series
Table 8, continued. Order Guide • V6 Series Switches, Flange Mount with Boot Seal
For catalog listings not shown, please contact your Honeywell distributor or representative.
Catalog Listing
Comments
BZ,
A,
1,95 N. max.
BZV6-2RN18
-
15°
20° Ref
-
SPDT 15 A [7.0 oz max.]
Coil-spring Wobble
BZ,
SPDT 15 A
A,
2,78 to 5,57
[10 to 20]
105,56 Ref.
[4.156]
4,83
[0.188]
5,56
[0.219]
0,15
[0.006]
BZV6-2RN4
Manual Palm Button
BZ,
SPDT 15 A
A,
1,67 to 5,56 69,09 1,52
[6 to 20]
1,98
4,78
[0.188]
Reset position:
26,97 [1.062] max.
BZV6-RNX1
NA
[2.720 0.060] [0.078]
Pin Plunger w
Manual Reset
sensing.honeywell.com
18
MICRO SWITCH™ Medium-Duty Limit Switches
DIMENSIONS
Figure 25.Top pin plunger, flange mount with boot seal
Figure 26.Top roller plunger, flange mount with boot seal
Ø12,7 mm [0.50 in] x
4,6 mm [0.18 in] W
roller
2,0 mm
[0.08 in]
Ø 8,44 mm
[Ø 0.33 in]
82,04 mm
[3.23 in]
1/2-14 NPT
Threads
1/2-14 NPT
Threads
69,1 mm
[2.72 in]
2X Ø 4,37 mm
[Ø 0.172 in]
2X Ø 4,37 mm
[Ø 0.172 in]
44,4 mm
[1.75 in]
44,4 mm
[1.75 in]
22,6 mm
[0.89 in]
22,6 mm
[0.89 in]
25,4 mm
[1.00 in]
10,7 mm
[0.42 in]
69,6 mm [2.74 in]
10,7 mm
[0.42 in]
3,3 mm
[0.13 in]
25,4 mm
[1.00 in]
41,4 mm [1.63 in]
3,3 mm
[0.13 in]
41,4 mm [1.63 in]
69,6 mm
[2.74 in]
54,1 mm [2.13 in]
54,1 mm [2.13 in]
Figure 27. Cross roller plunger, flange mount with boot seal
Figure 28. Roller lever adjustable, flange mount with boot seal
Ø12,7 mm [0.50 in] x
4,6 mm [0.18 in] W
Ø 19,0 mm [0.75 in] x
6,4 mm [0.25 in] W
roller
39,6 mm
roller
[1.57 in]
56,64 mm
[2.23 in]
18,3 mm
[0.72 in]
1/2-14 NPT
23,1 mm
[0.91 in]
Threads
2X Ø 4,37 mm
[Ø 0.172 in]
53,1 mm
[2.09 in]
1/2-14 NPT
Threads
25,4 mm
[1.00 in]
22,6 mm
[0.89 in]
2X Ø 4,37 mm
[Ø 0.172 in]
25,4 mm
[1.00 in]
10,7 mm
[0.42 in]
69,6 mm [2.74 in]
3,3 mm
[0.13 in]
41,4 mm [1.63 in]
77,2 mm [3.04 in]
25,4 mm
[1.00 in]
22,6 mm
[0.89 in]
54,1 mm [2.13 in]
25,4 mm
[1.00 in]
10,7 mm
[0.42 in]
69,6 mm [2.74 in]
77,2 mm [3.04 in]
3,3 mm
[0.13 in]
41,4 mm [1.63 in]
54,1 mm [2.13 in]
Figure 30. Rod lever, flange mount with boot seal
Figure 29. One-way roller lever, flange mount with boot seal
152,4 mm [6.0 in]
Ø 19,0 mm [0.75 in] x
6,4 mm [0.25 in] W
18,3 mm
[0.72 in]
roller
18,3 mm
[0.72 in]
32,26 mm
[1.27 in]
53,1 mm
1/2-14 NPT
[2.09 in]
53,1 mm
[2.09 in]
Threads
1/2-14 NPT
Threads
2X Ø 4,37 mm
[Ø 0.172 in]
2X Ø 4,37 mm
[Ø 0.172 in]
25,4 mm
[1.00 in]
22,6 mm
[0.89 in]
25,4 mm
22,6 mm
[1.00 in]
[0.89 in]
10,7 mm
[0.42 in]
25,4 mm
[1.00 in]
25,4 mm
[1.00 in]
10,7 mm
[0.42 in]
69,6 mm [2.74 in]
3,3 mm
[0.13 in]
69,6 mm [2.74 in]
77,2 mm [3.04 in]
41,4 mm [1.63 in]
3,3 mm
[0.13 in]
41,4 mm [1.63 in]
77,2 mm [3.04 in]
54,1 mm [2.13 in]
54,1 mm [2.13 in]
sensing.honeywell.com
19
E6/V6 Series
Figure 31. Manual palm button, flange mount with boot seal
Figure 32. Coil wobble, flange mount with boot seal
Ø 7,11 mm [Ø 0.28 in]
38,1 mm
18,3 mm
[0.72 in]
[1.50 in]
108,97 mm
[4.29 in]
31,75 mm
[1.25 in]
149,35 mm
[5.88 in]
1/2-14 NPT
Threads
53,1 mm
[2.09 in]
1/2-14 NPT
Threads
2X Ø 4,37 mm
[Ø 0.172 in]
2X Ø 4,37 mm
[Ø 0.172 in]
25,4 mm
[1.00 in]
25,4 mm
[1.00 in]
22,6 mm
[0.89 in]
22,6 mm
[0.89 in]
25,4 mm
[1.00 in]
10,7 mm
[0.42 in]
69,6 mm [2.74 in]
77,2 mm [3.04 in]
25,4 mm
[1.00 in]
10,7 mm
[0.42 in]
69,6 mm [2.74 in]
77,2 mm [3.04 in]
3,3 mm
[0.13 in]
3,3 mm
[0.13 in]
41,4 mm [1.63 in]
41,4 mm [1.63 in]
54,1 mm [2.13 in]
54,1 mm [2.13 in]
Figure 33.Top pin plunger, reset, flange mount with boot seal
Ø 8,44 mm
[Ø 0.33 in]
10,7 mm
[0.42 in]
1/2-14 NPT
Threads
2X Ø 4,37 mm
[Ø 0.172 in]
22,6 mm
[0.89 in]
3,3 mm
[0.13 in]
25,4 mm
25,4 mm
[1.00 in]
[1.00 in]
69,6 mm [2.74 in]
41,4 mm [1.63 in]
77,2 mm [3.04 in]
54,1 mm [2.13 in]
sensing.honeywell.com
20
MICRO SWITCH™ Medium-Duty Limit Switches
Table 9. Order Guide • V6 Series Switches, Flange Mount without Boot Seal
For catalog listings not shown, please contact your Honeywell distributor or representative.
Catalog Listing
Comments
BZ,
SPDT 15 A
A,
2,50 to 3,61 63,50 1,14
[9 to 13] [2.50 0.045]
0,38
[0.015]
5,56
[0.219]
0,05
[0.002]
BZV6-2RQ
Pin plunger
BZ,
SPDT 15 A
A,
2,50 to 3,61 75,01 1,52
[9 to 13]
0,38
3,56
[0.140]
0,05
[0.002]
BZV6-2RQ8
[2.953 0.060] [0.015]
Inline Roller Plunger
BZ,
SPDT 15 A
A,
2,50 to 3,61 75,01 1,52
0,38
3,56
[0.140]
0,05
[0.002]
BZV6-2RQ81
[9 to 13]
[2.953 0.060] [0.015]
Cross Roller
Plunger
BZ,
SPDT 15 A
A,
2,78 to 5,00
[10 to 18]
86,51 Ref
[3.406]
4,83
[0.188]
5,56
[0.219]
0,15
[0.006]
BZV6-2RQ2
Roller Lever
BZ,
SPDT 15 A
A,
0,56 to 1,39
[2 to 5]
18,24
[0.718]
21,29
[0.838]
5,82
[0.229]
BZV6-2RQ62
-
Low-force Rod
Lever
sensing.honeywell.com
21
E6/V6 Series
DIMENSIONS
Figure 34.Top pin plunger, flange mount
Figure 35.Top roller plunger, flange mount
Ø12,7 mm [0.50 in] x
4,6 mm [0.18 in] W
roller
Ø 8,44 mm
[Ø 0.33 in]
74,93 mm
[2.95 in]
1/2-14 NPT
Threads
1/2-14 NPT
Threads
63,5 mm
[2.50 in]
2X Ø 4,37 mm
[Ø 0.172 in]
2X Ø 4,37 mm
[Ø 0.172 in]
44,4 mm
44,4 mm
[1.75 in]
[1.75 in]
22,6 mm
[0.89 in]
22,6 mm
[0.89 in]
25,4 mm
[1.00 in]
10,7 mm
[0.42 in]
69,6 mm [2.74 in]
25,4 mm
[1.00 in]
10,7 mm
[0.42 in]
69,6 mm
[2.74 in]
3,3 mm
[0.13 in]
3,3 mm
[0.13 in]
41,4 mm [1.63 in]
41,4 mm [1.63 in]
54,1 mm [2.13 in]
54,1 mm [2.13 in]
Figure 36. Cross roller plunger, flange mount
Figure 37. Roller lever adjustable, flange mount
Ø 19,0 mm [0.75 in] x
6,4 mm [0.25 in] W
Ø12,7 mm [0.50 in] x
4,6 mm [0.18 in] W
39,6 mm
roller
roller
[1.57 in]
18,3 mm
[0.72 in]
74,9 mm
[2.95 in]
1/2-14 NPT
Threads
23,1 mm
[0.91 in]
2X Ø 4,37 mm
[Ø 0.172 in]
44,4 mm
[1.75 in]
22,6 mm
[0.89 in]
1/2-14 NPT
Threads
42,9 mm
[1.69 in]
25,4 mm
[1.00 in]
10,7 mm
[0.42 in]
2X Ø 4,37 mm
[Ø 0.172 in]
3,3 mm
[0.13 in]
69,6 mm [2.74 in]
77,2 mm [3.04 in]
41,4 mm [1.63 in]
25,4 mm
[1.00 in]
22,6 mm
[0.89 in]
54,1 mm [2.13 in]
25,4 mm
[1.00 in]
10,7 mm
[0.42 in]
69,6 mm [2.74 in]
77,2 mm [3.04 in]
3,3 mm
[0.13 in]
Figure 38. Rod lever, flange mount
41,4 mm [1.63 in]
152,4 mm [6.0 in]
54,1 mm [2.13 in]
18,3 mm
[0.72 in]
1/2-14 NPT
Threads
42,93 mm
[1.69 in]
2X Ø 4,37 mm
[Ø 0.172 in]
25,4 mm
[1.00 in]
22,6 mm
[0.89 in]
25,4 mm
[1.00 in]
10,7 mm
[0.42 in]
3,3 mm
[0.13 in]
69,6 mm [2.74 in]
77,2 mm [3.04 in]
41,4 mm [1.63 in]
54,1 mm [2.13 in]
sensing.honeywell.com
22
MICRO SWITCH™ Medium-Duty Limit Switches
E6/V6 REPLACEMENT PARTS
The metal bottom cover includes the insulator seal and two cover screws
The plunger seal boot includes the plunger seal and retaining hardware
The hardware packet includes mounting hardware and seal boot as noted in the tables
Table 10. Actuator with Boot Seal Replacement Parts
Plunger Seal
Boot1
Internal Basic
Switch
Cat. Listing
Bottom Cover
Hardware Packet
Actuator
BZE6-2RN
3PA13-E6
3PA14-V6
3PA13-E6
3PA13-E6
3PA13-E6
3PA13-E6
3PA14-V6
3PA13-E6
3PA14-V6
3PA13-E6
3PA14-V6
3PA13-E6
3PA14-V6
10PA2
10PA2
10PA2
10PA2
10PA2
10PA2
10PA2
10PA2
10PA2
10PA2
10PA2
10PA2
10PA2
1PA2*
1PA2*
1PA46*2
1PA2*
1PA47
1PA13*
1PA13*
-
BZ-2RQ77**
BZ-2RQ77**
BZ-2RN730**
BZ-2RQ7722**
BZ-2RN784
BZ-2RN702**
BZ-2RN702**
BZ-2R-A2
Integral to internal basic switch
BZV6-2RN
Integral to internal basic switch
BZE6-2RN7
BZE6-2RN72
BZE6-2RN80
BZE6-2RN2
BZV6-2RN2
BZE6-2RN18
BZV6-2RN18
DTE6-2RN
Integral to internal basic switch
Integral to internal basic switch
Integral to internal basic switch
6PA2*
6PA2*
6PA1953
6PA1953
8PA14
8PA14
6PA2*
-
BZ-2R-A2
1PA2
1PA2
-
DT-2R3-A7
DT-2R3-A7
DT-2R3-A7
DT-2R3-A7
DTV6-2RN
DTE6-2RN2
DTV6-2RN2
-
6PA2*
*Includes plunger seal boot
**Includes hardware packet
1. To order replacement low temperature plunger boot seal (switch code 34), specify 10PA1
2. 1PA46 hardware packet cannot be ordered separately. When BZ-2RN730 internal basic switch is ordered, the 1PA46 hardware packet
is included with internal basic switch.
3. To order replacement wobble actuator including internal threaded bushing, specify 6PA188-F
Table 11. Actuator without Boot Seal Replacement Parts
Cat. Listing
Bottom Cover
Hardware Packet
Internal Basic Switch
Actuator
BZE6-2RQ
3PA13-E6
3PA14-V6
3PA13-E6
3PA14-V6
3PA13-E6
3PA14-V6
3PA13-E6
3PA14-V6
1PA1
1PA1
BZ-2RQ66
BZ-2RQ66
Integral to internal basic switch
Integral to internal basic switch
Integral to internal basic switch
Integral to internal basic switch
Integral to internal basic switch
Integral to internal basic switch
6PA1
BZV6-2RQ
BZE6-2RQ8
BZV6-2RQ8
BZE6-2RQ81
BZV6-2RQ81
BZE6-2RQ2
BZV6-2RQ2
1PA19
1PA19
1PA19
1PA19
1PA3
BZ-2RQ784**
BZ-2RQ784**
BZ-2RQ785**
BZ-2RQ785**
BZ-2RQ68**
BZ-2RQ68**
1PA3
6PA1
**Includes hardware packet
sensing.honeywell.com
23
E6/V6 Series
This Honeywell datasheet supports the following MICRO SWITCH™ E6/V6 Series Limit Switch Listings
BZE6-2RN4
BZE6-2RN7
BZE6-2RN80
BZE6-2RQ2
BZE6-RN80X2
BZE6-2AQ
BZE6-2AQ8T
BZE6-2GN
BZE6-2RN
BZE6-2RN72-S
BZE6-2RN7-S
BZE6-2RN8
BZE6-3YNP
BZE6-3YNT
BZE6-3YQ9
BZE6-3YQT
BZE6-7RN
BZE6-7RN18
BZE6-7RN1812
BZE6-7RN51
BZE6-7RN8051
BZE6-7RNT
BZE6-7RQ8
BZE6-7RQ9
BZE6-7RQ9T
BZE6-RN
BZE6-RN18X1
BZE6-RN18X2
BZE6-RN18X3
BZE6-RN2X1
BZE6-RNX1
BZE6-RNX12
BZE6-RNX17
BZE6-RQ
BZV6-2RQ2
BZV6-2RQ39
BZV6-2RQ62
BZV6-2RQ8
BZV6-2RQ81
BZV6-2RQ9
BZV6-7RN
BZV6-7RN2T
BZV6-RNX1
10PA1
BZE6-2RN8034
BZE6-2RN81
BZE6-2RN-C
BZE6-2RN-F1
BZE6-2RN-F3
BZE6-2RN-F6
BZE6-2RN-FR
BZE6-2RN-M
BZE6-2RN-R
BZE6-2RN-S
BZE6-2RQ
BZE6-2RQ125
BZE6-2RQ136
BZE6-2RQ165
BZE6-2RQ168
BZE6-2RQ219
BZE6-2RQ241
BZE6-2RQ28
BZE6-2RQ2-S
BZE6-2RQ4
BZE6-2RN18
BZE6-2RN1809-5
BZE6-2RN1810
BZE6-2RN1812
BZE6-2RN183
BZE6-2RN185
BZE6-2RN185-WP
BZE6-2RN187
BZE6-2RN1872
BZE6-2RN18721
BZE6-2RN18-C3
BZE6-2RN19
BZE6-2RN191-S
BZE6-2RN193
BZE6-2RN196-F5
BZE6-2RN2
BZE6-2RN221
BZE6-2RN224
BZE6-2RN234
BZE6-2RN272
BZE6-2RN28
BZE6-2RN281
BZE6-2RN28-S
BZE6-2RN2-F3
BZE6-2RN2-F6
BZE6-2RN2-S
BZE6-2RN2-TW
BZE6-2RN34
BZE6-2RN37
BZE6-2RN39
BZE6-2RN5
10PA2
19PA22-E6
3PA13-E6
3PA14-V6
6PA140-E6
6PA147-E6
6PA148-E6
6PA187-E6
BME6-2RN
BME6-2RN2
BME6-2RN373
BME6-2RQ
BME6-2RQ171
BME6-2RQ173
BME6-2RQ273
BME6-2RQ81
DTE6-2RN
DTE6-2RN2
DTE6-2RN28
DTE6-2RN281
DTE6-2RN4
DTE6-2RN80
DTE6-2RN8034-M
DTE6-2RQ
BZE6-RQ2
BZE6-2RQ5
BZE6-RQ2X2
BZE6-RQ71
BZE6-RQ81X2
BZE6-RQ8X2
BZE6-RQ8X4
BZE6-RQ9
BZE6-2RQ62
BZE6-2RQ62-S
BZE6-2RQ7
BZE6-2RQ72
BZE6-2RQ8
BZE6-2RQ81
BZE6-2RQ814
BZE6-2RQ81-S
BZE6-2RQ841-BP
BZE6-2RQ8722
BZE6-2RQ8-S
BZE6-2RQ9
BZE6-2RQ9-S
BZE6-2RQ-S
BZE6-3RN
BZE6-RQX2
BZV6-2RN
BZV6-2RN18
BZV6-2RN2
BZV6-2RN28
BZV6-2RN34
BZV6-2RN4
BZV6-2RN62
BZV6-2RN80
BZV6-2RN81
BZV6-2RN-C
BZV6-2RN-S
BZV6-2RQ
DTE6-2RQ2
DTE6-2RQ62
DTE6-2RQ81
DTE6-2RQ9
DTV6-2RN
DTV6-2RN2
DTV6-2RN4
HSE6-3RNT2
BZE6-3RN18150-C
BZE6-3RN2153
BZE6-3YN2
BZE6-2RN51
BZE6-2RN62
BZE6-2RN72
sensing.honeywell.com
24
MICRO SWITCH™ Medium-Duty Limit Switches
ADDITIONAL INFORMATION
WARNING
The following associated literature is available on the Honeywell web
PERSONAL INJURY
site at sensing.honeywell.com:
DO NOT USE these products as safety or emergency stop
devices or in any other application where failure of the
product could result in personal injury.
• Product installation instructions
• Product range guide
• Product nomenclature tree
Failure to comply with these instructions could result in
death or serious injury.
• Product application-specific information
– Limit and enclosed switch reference standards
– Application note: Machine tool application guide
– Application note: Industrial machinery switch guide
WARNING
MISUSE OF DOCUMENTATION
•
The information presented in this product sheet is for
reference only. Do not use this document as a product
installation guide.
•
Complete installation, operation, and maintenance
information is provided in the instructions supplied with
each product.
Failure to comply with these instructions could result in
death or serious injury.
WARRANTY/REMEDY
Honeywell warrants goods of its manufacture as being free of
defective materials and faulty workmanship. Honeywell’s standard
product warranty applies unless agreed to otherwise by Honeywell
in writing; please refer to your order acknowledgement or consult
your local sales office for specific warranty details. If warranted
goods are returned to Honeywell during the period of coverage,
Honeywell will repair or replace, at its option, without charge those
items it finds defective. The foregoing is buyer’s sole remedy
and is in lieu of all other warranties, expressed or implied,
including those of merchantability and fitness for a particu-
lar purpose. In no event shall Honeywell be liable for conse-
quential, special, or indirect damages.
While we provide application assistance personally, through our
literature and the Honeywell website, it is up to the customer to
determine the suitability of the product in the application.
Specifications may change without notice. The information we
supply is believed to be accurate and reliable as of this printing.
However, we assume no responsibility for its use.
sensing.honeywell.com
25
Find out more
Honeywell serves its customers
through a worldwide network
of sales offices, representatives
and distributors. For application
assistance, current specifications,
pricing or name of the nearest
Authorized Distributor, contact
your local sales office.
To learn more about Honeywell’s
sensing and control products,
call +1-815-235-6847 or
1-800-537-6945,
visit sensing.honeywell.com,
or e-mail inquiries to
info.sc@honeywell.com
Sensing and Control
Honeywell
1985 Douglas Drive North
Golden Valley, MN 55422
honeywell.com
002383-2-EN IL50 GLO
December 2014
Copyright © 2014 Honeywell International Inc. All rights reserved.
相关型号：
BZV6-2RN28
Snap Acting/Limit Switch, SPDT, Momentary, 0.5A, 125VDC, 11.5mm, Screw Terminal, Steel Roller Lever Plunger Actuator, Panel Mount-threaded,
HONEYWELL
BZV6-2RN80
Snap Acting/Limit Switch, SPDT, Momentary, 0.5A, 125VDC, 7.54mm, Screw Terminal, Steel Roller Plunger Actuator, Panel Mount,
HONEYWELL
BZV6-2RN81
Snap Acting/Limit Switch, SPDT, Momentary, 0.5A, 125VDC, 7.54mm, Screw Terminal, Steel Roller Plunger Actuator, Panel Mount
HONEYWELL
BZV6-2RQ39
Snap Acting/Limit Switch, SPDT, Momentary, 0.5A, 250VDC, 3.28mm, Wire Terminal, Long Bar Actuator, Panel Mount
HONEYWELL
BZV6-2RQ81
Snap Acting/Limit Switch, SPDT, Momentary, 0.5A, 125VDC, 3.96mm, Screw Terminal, Steel Roller Actuator, Panel Mount-threaded
HONEYWELL
BZV6-7RN
Snap Acting/Limit Switch, SPDT, Momentary, 0.5A, 125VDC, 7.54mm, Screw Terminal, Steel Plunger Actuator, Panel Mount
HONEYWELL
BZV6-7RN2T
Snap Acting/Limit Switch, SPDT, Momentary, 0.5A, 250VDC, 8.55mm, Wire Terminal, Top Roller Arm Actuator, Panel Mount
HONEYWELL
BZV6-RNX1
Snap Acting/Limit Switch, SPDT, Momentary, 0.5A, 125VDC, 6.76mm, Screw Terminal, Steel Plunger Actuator, Panel Mount-threaded,
HONEYWELL
©2020 ICPDF网 联系我们和版权申明