BZE7S-2RN-PG [HONEYWELL]
Snap Acting/Limit Switch, SPDT, Momentary, 0.5A, 250VDC, 7.54mm, Wire Terminal, Top Plunger Actuator, Panel Mount;
| 型号： | BZE7S-2RN-PG |
| 厂家： | 
Honeywell |
| 描述： | Snap Acting/Limit Switch, SPDT, Momentary, 0.5A, 250VDC, 7.54mm, Wire Terminal, Top Plunger Actuator, Panel Mount 开关 光电二极管 |
| 文件： | 总24页 (文件大小：1866K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
MICRO SWITCH™
Medium-Duty Limit Switches
E7 and V7 Series
Datasheet
MICRO SWITCH™ E7 and V7 Series
Medium-Duty Limit Switches
Honeywell MICRO SWITCH™ E7/V7 Series medium duty limit switches are designed for a wide variety of indoor and
outdoor applications. Typical applications include equipment for commercial, industrial, and transportation industries.
The electrostatic applied epoxy coating to the aluminum housings enhances the durability of the product in most ap-
plications. The E7/V7 family of switches incorporates the Honeywell MICRO SWITCH™ BZ switch element which has
the reliable snap-spring mechanism with more than 60 years of proven service.
The sealed (plungers with boots) E7/V7 Series are preferred for applications where there could be exposure to liquid
and/or particulate environments. The unsealed E7/V7 Series are ideal for applications where there will not be exposure
to liquid or dust environments. The compact size of the limit switch permits installation where there is limited space
available on equipment.
The SPDT (Single Pole Double Throw) E7/E7S/V7/E9 Series of catalog listings are certified to CE and CSA for world-
wide applications. While the DPDT (Double Pole Double Throw) E7/E7S/V7/E9 Series of catalog listings are certified to
CE for many applications.
What makes our switches better?
Designed with MICRO SWITCH™ BZ or DT basic switches to
deliver precise switching of electrical and mechanical operating
characteristics
Rugged, epoxy-coated aluminum housing for indoor and outdoo
applications
Small footprint with easy access to wiring terminals
Available in a configuration suited to the application with variety o
actuators, circuitries, conduits, and mounting options
HIGH PERFORMANCE • DURABILITY
CUSTOMIZATION • EASY TO INSTALL
sensing.honeywell.com
2
DESIGNED FOR DEMANDING ENVIRONMENTS AND
APPLICATIONS
Features
and Benefits
MICRO SWITCH™ E7/V7 Series switches include a wide variety of actuators and
feature an electrostatic epoxy coated aluminum housing for durability in a wide
range of applications. The products are engineered with MICRO SWITCH™ BZ or
DT internal basic switches that have years of proven service.
Side and flange mounting options
RELIABLY HANDLES ELECTRICAL LOADS
The E7/V7 Series are available with SPDT contacts or DPDT contacts with
momentary action to meet circuit requirements. The BZE/BZV Series with
SPDT contacts is rated for AC15, A300 and DC13, Q300 for typical ac and
dc applications. The DTE Series with DPDT contacts is rated for AC15, B300
and DC13, R300 for typical ac and dc applications. An internal ground screw is
provided to meet electrical codes as required.
DESIGN FLEXIBILITY
These limit switches are offered with multiple connectivity options: two different
conduit offerings, with single or double conduits.
GLOBAL APPROVALS
The BZE7, BZE7S, BZV7, and BZE9 Series with SPDT (single-pole double throw)
contacts are certified to CE and CSA for worldwide applications. The DTE7 and
DTE7S Series with DPDT (double-pole double throw) contacts are certified to CE
for many uses.
INDOOR AND OUTDOOR OPTIONS
The Series’ temperature range of -30 °C to 70 °C [-22 °F to 158 °F] makes the
switch well suited for a wide range of indoor and outdoor applications.
sensing.honeywell.com
3
Potential Applications
INDUSTRIAL
• Escalator obstruction detection – Roller actuator mounted behind skirt on
escalators, if activated, power to the escalator is cut to avoid injury
• Air curtain – A component in a circuit for control of air stream
• Door or gate position – Can provide a signal when a door or gate is opened or
closed
• Commercial food processing – For large scale food preparation, to ensure all
features are in the desired operating position
TRANSPORTATION
• Traffic barrier signaling – If traffic barrier lowers, signal lights can be activated
Figure 1. MICRO SWITCH™ E7/V7 Features and Options
Hardened steel plunger
for long life
Stainless steel roller
Wide variety of
actuators and
operating
characteristics
Diaphragm plunger
seal for long life
Wide variety of
actuators and
operating
characteristics
Captive screws (2)
Captive screws (2)
Switch assembly can be
Switch assembly
can be rotated
180˚ on bottom enclosure
rotated 180˚ on bottom
enclosure
Terminal screws of switch
easily accessed with
enclosure removal
Terminal screws of switch easily
accessed with housing removed
Double conduit option for
through wiring
One piece molded rubber
insulator seal
One piece molded
Rugged aluminum
enclosure
epoxy coated for
environmental
durability
rubber insulator seal
Rugged aluminum
enclosure
epoxy coated for
environmental
durability
Internal ground screw
provided in
bottom enclosure
Internal ground screw
provided in enclosure
Threaded conduit
Threaded conduit
Typical switch assembly, flange mount,
without boot sealed actuator
Typical switch assembly, side mount,
with boot sealed plunger
Four mounting options
∙ Diagonal side mount (E7 Series)
∙ Side mount on 25,4 mm centers (E7S Series)
∙ Side mount on 76 mm centers with double conduit (E9 Series)
∙ Flange mount (V7 Series)
sensing.honeywell.com
4
MICRO SWITCH™ Medium-Duty Limit Switches
Table 1. Specifications
Characteristic
Parameter
top pin plunger (boot sealed or standard type);
inline roller plunger (boot sealed or standard type);
cross roller plunger (boot sealed or standard type);
roller lever adjustable (boot sealed or standard type);
one-way roller lever adjustable (boot sealed);
coil spring wobble (boot sealed)
Actuators
diagonal side mount with single conduit (E7 type);
diagonal side mount or side mount with single conduit (E7S type),
side mount with double conduit (E9 type)
Enclosure type
flange mount with single conduit (V7 type)
Housing material
Termination
electrostatic epoxy coated aluminum
threaded conduit, 20 mm or PG 13,5
actuator with boot seal: IP65
Sealing
actuator (QN8 style) with internal plunger seal: IP65
actuator without boot seal or internal plunger seal: IP50
SPDT (snap-action contacts) 1NC/1NO, same polarity
DPDT (snap-action contacts) 2NC/2NO, each pole same polarity
Switching options
Operating temperature
Electrical rating
-30 °C to 70 °C [-22 °F to 158 °F]
see tables 2 and 3
Rated impulse voltage Ui
Pollution degree (with enclosure)
Agency certifications
1.5 kV
1 (DTE Series); 2 (BZE and BZV Series)
EN/IEC 60947-5-1 (all Series); CSA file 15775 (BZ prefix only)
Table 2. BZE and BZV Series Electrical Ratings: EN60947-5-1, IEC 60947-5-1
Designation &
Category
Thermal Current,
It (Amps)
Rated Operational
Voltage, Ue
Rated Operational
Amps, Ie
VA Rating Make
VA Rating Break
AC15, A300
AC15, A300
DC13, Q300
DC13, Q300
10
10
10
10
120
240
125
250
6
7200
7200
69
720
720
69
3
0.55
0.27
69
69
Table 3. DTE Electrical Ratings: EN60947-5-1, IEC 60947-5-1
Designation &
Category
Thermal Current,
It (Amps)
Rated Operational
Voltage, Ue
Rated Operational
Amps, Ie
VA Rating Make
VA Rating Break
AC15, B300
AC15, B300
DC13, R300
DC13, R300
5
5
5
5
120
240
125
250
3
3600
3600
28
360
360
28
1.5
0.22
0.1
28
28
Table 4. Switching
SPDT (BZE and BZV Series)
DPDT (DTE Series)
NC
NO
C
NC
NO
C
NC
NO
C
sensing.honeywell.com
5
E7 and V7 Series
PRODUCT NOMENCLATURE
BZ
E7
—
2
2
—
C
R
N
Conduit
Thread
Actuator
Code
Internal Base
Switch Construction
Enclosure
Type
Plunger
Type
Switch Type
Contact
BZ Series
Basic Switch,
SPDT
Diagonal side
mount w/ single
conduit entry2
Standard
(single break)
Pin plunger
PG 13,5 mm
conduit
Standard
Seal boot
E7
V7
N
Q
2
R
(blank)
PG
20 mm
conduit
Flange mount
version of E7
Adjustable
roller lever
No seal boot
C
2
8
Side mount w/
single conduit
Inline roller plunger
with internal
DT Series
Basic Switch2,
DPDT
80 Roller plunger
E7S
E9
QN plunger seal3
entry*2
Inline roller
Side mount w/
double conduit
entry
plunger with
9
removeable roller3
* mounting holes
provide interchangeability
with BZE6 products
Coil spring
18
28
81
wobble stick
One-way
roller lever
1
NOTE: not all combinations of model code are available.
Please contact your Honeywell provider/representative for assistance.
DT Series basic switch available with enclosure type E7 or E7S only.
With “Q” style plunger only.
Cross
roller plunger
2
3
sensing.honeywell.com
6
MICRO SWITCH™ Medium-Duty Limit Switches
Table 5. Order Guide • E7 Diagonal Side Mount with Sealed Actuator
For catalog listings not shown, please contact your Honeywell distributor or representative.
Catalog Listing
BZ, A300,
SPDT Q300
BZ, A300,
SPDT Q300
255 to 680
[9 to 24]
38,58 0,76
[1.519 0.030] [0.078] [0.219] [0.002]
38,58 0,76 1,98 5,56 0,05
[1.519 0.030] [0.078] [0.219] [0.002]
40,95 1,14 3,18 3,18 1,78
[1.612 0.045] [0.125] [0.125] [0.070]
40,95 1,14 3,18 3,18 1,78
[1.612 0.045] [0.125] [0.125] [0.070]
59,56 1,19 3,81 3,18 0,05
[2.345 0.047] [0.150] [0.125] [0.002]
59,56 1,19 3,81 3,18 0,05
[2.345 0.047] [0.150] [0.125] [0.002]
59,31 1,19 4,06 3,18 1,65
[2.335 0.047] [0.160] [0.125] [0.065]
59,31 1,19 4,06 3,18 1,65
[2.335 0.047] [0.160] [0.125] [0.065]
1,98
5,56
0,05
BZE7-2RN-C
BZE7-2RN-PG
DTE7-2RN-C
20 mm
255 to 680
[9 to 24]
PG
13,5
DT, B300, 454 to 1389
DPDT R300 [16 to 49]
DT, B300, 454 to 1389
20 mm
Pin Plunger
(see Figure 1)
PG
13,5
DTE7-2RN-PG
BZE7-2RQN8-C
BZE7-2RQN8-PG
DTE7-2RQN8-C
DTE7-2RQN8-PG
BZE7-2RN2-C
DPDT R300
BZ, A300,
SPDT Q300
BZ, A300,
SPDT Q300
DT, B300,
DPDT R300
DT, B300,
DPDT R300
[16 to 49]
3628 [128]
max.
20 mm
Roller
plunger
assembly
can be
3628 [128]
max.
PG
13,5
3628 [128]
max.
positioned
at 90°
increments
20 mm
Inline Roller Plunger
(see Figure 2)
3628 [128]
max.
PG
13,5
BZ, A300,
SPDT Q300
284 to 567
[10 to 20]
66,34 [2.612]
Ref
4,78
[0.188] [0.219] [0.008]
4,78 5,56 0,20
[0.188] [0.219] [0.008]
6,76 5,56 4,19
[0.266] [0.219] [0.165]
6,76 5,56 4,19
[0.266] [0.219] [0.165]
5,94 5,56 0,15
[0.234] [0.219] [0.006]
5,56
0,20
20 mm
BZ, A300,
SPDT Q300
284 to 567
[10 to 20]
66,34 [2.612]
Ref
PG
13,5
BZE7-2RN2-PG
DT, B300,
DPDT R300
1134 [40]
max.
64,36 [2.534]
Ref
DTE7-2RN2-C
DTE7-2RN2-PG
BZE7-2RN28-C
20 mm
DT, B300,
DPDT R300
1134 [40]
max.
64,36 [2.534]
Ref
PG
13,5
Roller Lever
(see Figure 3)
BZ, A300,
SPDT Q300
284 to 567
[10 to 20]
-
-
20 mm
BZ, A300,
SPDT Q300
284 to 567
[10 to 20]
5,94 5,56 0,15
[0.234] [0.219] [0.006]
PG
13,5
BZE7-2RN28-PG
DTE7-2RN28-C
One-way Roller
Lever
(see Figure 4)
DT, B300,
DPDT R300
1134 [40]
max.
6,76
5,56
4,19
-
-
20 mm
20 mm
[0.266] [0.219] [0.165]
BZ, A300,
SPDT Q300
BZE7-2RN18-C
BZE7-2RN18-PG
-
-
15°
15°
20° Ref
20° Ref
-
-
BZ, A300,
SPDT Q300
PG
13,5
-
Coil-Spring Wobble
(see Figure 5)
sensing.honeywell.com
7
E7 and V7 Series
DIMENSIONS
Figure 1. E7 Series, top pin plunger, diagonal mount with boot
seal
Figure 2. E7 Series, inline roller plunger, diagonal mount,
sealed
3,8 [0.15] pretravel
1,93 [0.076] pretravel
Ø 8,38 [Ø 0.33]
Ø 16,66 x 4,95 wide roller
[Ø 0.656 x 0.195]
Internal plunger seal
38,58
OP
[1.519]
Ø 16,0 [Ø 0.63]
(2) Ø 5,16
[Ø 0.203]
mounting holes
59,56
OP
13,97
[0.55]
[2.345]
(2) Ø 5,16
[Ø 0.203]
mounting holes
13,97
[0.55]
25,4
[1.00]
Ø 14,73
[Ø 0.58]
25,4
[1.00]
Ø 14,73
[Ø 0.58]
5,84 [0.23]
12,7 [0.50]
conduit
centerline
4,06 [0.16]
68,28 [2.69]
76,40 [3.01]
5,84 [0.23]
12,7 [0.50]
conduit
4,06 [0.16]
62,28 [2.69]
centerline
Figure 3. E7 Series, roller lever, diagonal mount with boot seal
76,40 [3.01]
Ø 19,05 x 7,92 wide roller
[Ø 0.75 x 0.312]
39,88
[1.57]
Figure 4. E7 Series, one-way roller lever, diagonal mount with
boot seal
18,29
[0.72]
39,6
[1.56]
Ø 19,0 [0.75] x
7,9 [0.31] W
roller
24,38
[0.91]
225°
18,3
[0.72]
32,26
[1.27]
180°
48,11
[1.894]
(2) Ø 5,16
[Ø 0.203]
mounting holes
13,97
[0.55]
48,11
[1.894]
25,4
(2) Ø 5,16
[Ø 0.203]
mounting holes
[1.00]
Ø 14,73
[Ø 0.58]
13,97
[0.55]
25,4
[1.00]
12,7 [0.50]
conduit
centerline
5,84 [0.23]
4,06 [0.16]
62,28 [2.69]
Ø 14,73
[Ø 0.58]
76,40 [3.01]
5,84 [0.23]
4,06 [0.16]
Figure 5. E7 Series, coil wobble, diagonal mount with boot
seal
12,7 [0.50]
conduit
centerline
62,28 [2.69]
76,40 [3.01]
151,13
[5.95]
(2) Ø 5,16
[Ø 0.203]
mounting holes
13,97
[0.55]
25,4
[1.00]
Ø 14,73
[Ø 0.58]
12,7 [0.50]
conduit
5,84 [0.23]
4,06 [0.16]
62,28 [2.69]
centerline
76,40 [3.01]
sensing.honeywell.com
8
MICRO SWITCH™ Medium-Duty Limit Switches
Table 6. Order Guide • E7 Series Switches, Diagonal Mount without Boot Sealed Actuator
For catalog listings not shown, please contact your Honeywell distributor or representative.
Catalog Listing
BZ, A300,
SPDT Q300
255 to 369
[9 to 13]
28,70 0,76
[1.30 0.030] [0.015] [0.219] [0.002]
0,38
5,56
0,05
BZE7-2RQ-C
20 mm
BZ, A300,
SPDT Q300
255 to 369
[9 to 13]
28,70 0,76
[1.30 0.030] [0.015] [0.219] [0.002]
0,38
5,56
0,05
PG
13,5
BZE7-2RQ-PG
Pin Plunger
(see Figure 6)
BZ, A300,
SPDT Q300
BZ, A300,
SPDT Q300
BZ, A300,
SPDT Q300
BZ, A300,
SPDT Q300
255 to 369
[9 to 13]
44,53 1,19
[1.753 0.047] [0.015] [0.140] [0.002]
44,53 1,19 0,38 3,56 0,05
[1.753 0.047] [0.015] [0.140] [0.002]
44,53 1,19 0,38 3,56 0,05
[1.753 0.047] [0.015] [0.140] [0.002]
44,53 1,19 0,38 3,56 0,05
[1.753 0.047] [0.015] [0.140] [0.002]
0,38
3,56
0,05
BZE7-2RQ8-C
BZE7-2RQ8-PG
BZE7-2RQ9-C 1
BZE7-2RQ9-PG 1
20 mm
255 to 369
[9 to 13]
PG
13,5
255 to 369
[9 to 13]
Removable
roller
20 mm
Inline Roller Plunger
(see Figure 7)
255 to 369
[9 to 13]
PG
13,5
Removable
roller
BZ, A300,
SPDT Q300
255 to 369
[9 to 13]
44,53 1,19
[1.753 0.047] [0.015] [0.140] [0.002]
0,38
3,56
0,05
BZE7-2RQ81-C
BZE7-2RQ81-PG
20 mm
BZ, A300,
SPDT Q300
255 to 369
[9 to 13]
44,53 1,19
[1.753 0.047] [0.015] [0.140] [0.002]
0,38
3,56
0,05
PG
13,5
Cross Roller
Plunger
(see Figure 8)
BZ, A300,
SPDT Q300
284 to 510
[10 to 18]
56,03 [2.206]
Ref.
4,78
5,56
0,15
BZE7-2RQ2-C
20 mm
[0.188] [0.219] [0.006]
BZ, A300,
SPDT Q300
284 to 510
[10 to 18]
56,03 [2.206]
Ref.
4,78
5,56
0,15
PG
13,5
BZE7-2RQ2-PG
[0.188] [0.219] [0.006]
Roller Lever
(see Figure 9)
1 With roller removed, plunger can be rotated 90° and roller re-assembled for a cross roller plunger.
sensing.honeywell.com
9
E7 and V7 Series
DIMENSIONS
Figure 6. E7 Series, top pin plunger, diagonal mount
Figure 7. E7 Series, inline roller plunger, diagonal mount
0,38 [0.015] pretravel
Ø 8,38 [Ø 0.33]
0,4 [0.015] pretravel
Ø 12,7 x 4,5 wide roller
[Ø 0.50 x 0.18]
33,02
[1.30]
OP
(2) Ø 5,16
[Ø 0.203]
mounting holes
44,5
OP
13,97
[0.55]
[1.75]
(2) Ø 5,16
[Ø 0.203]
mounting holes
13,97
[0.55]
25,4
[1.00]
Ø 14,73
[Ø 0.58]
25,4
[1.00]
Ø 14,73
[Ø 0.58]
5,84 [0.23]
12,7 [0.50]
conduit
centerline
4,06 [0.16]
62,28 [2.69]
76,40 [3.01]
12,7 [0.50]
conduit
centerline
5,84 [0.23]
4,06 [0.16]
76,40 [3.01]
62,28 [2.69]
Figure 9. E7 Series, roller lever, diagonal mount
Figure 8. E7 Series, cross roller plunger, diagonal mount
Ø 19,0 [0.75] x
39,6
Ø 12,7 x 4,57
0,38 [0.015] pretravel
7,9 [0.312] W
[1.57]
[Ø 0.50 x 0.18]
roller
wide roller
18,3
[0.72]
225°
23,1
[0.91]
44,53
OP
[1.75]
(2) Ø 5,16
[Ø 0.203]
mounting holes
13,97
[0.55]
37,8
[1.49]
(2) Ø 5,16
[Ø 0.203]
mounting holes
13,97
[0.55]
25,4
[1.00]
Ø 14,73
[Ø 0.58]
25,4
[1.00]
Ø 14,73
[Ø 0.58]
5,84 [0.23]
12,7 [0.50]
conduit
4,06 [0.16]
62,28 [2.69]
centerline
76,40 [3.01]
5,84 [0.23]
12,7 [0.50]
conduit
4,06 [0.16]
62,28 [2.69]
centerline
76,40 [3.01]
sensing.honeywell.com
10
MICRO SWITCH™ Medium-Duty Limit Switches
Table 7. Order Guide • E7S Series Switches, Side or Diagonal Mount with Sealed Actuator
For catalog listings not shown, please contact your Honeywell distributor or representative.
Catalog Listing
BZ, A300,
SPDT Q300
BZ, A300,
SPDT Q300
BZ, A300,
SPDT Q300
255 to 680
[9 to 24]
43,66 0,89
1,98
5,56
0,05
0.5-14
BZE7S-2RN
BZE7S-2RN-C
BZE7S-2RN-PG
DTE7S-2RN-C
[1.719 0.035] [0.078] [0.219] [0.002] NPSM
255 to 680
[9 to 24]
43,66 0,89
[1.719 0.035] [0.078] [0.219] [0.002]
43,66 0,89 1,98 5,56 0,05
[1.719 0.035] [0.078] [0.219] [0.002]
46,02 1,27 3,18 3,18 1,78
[1.812 0.050] [0.125] [0.125] [0.070]
1,98
5,56
0,05
20 mm
255 to 680
[9 to 24]
PG
13,5
Pin Plunger
(see Figure 10)
DT, B300, 454 to 1389
DPDT R300
20 mm
20 mm
[16 to 49]
Roller
plunger
assembly
can be
positioned
at 90°
increments
BZ, A300,
SPDT Q300
3628 [128]
max.
64,64 1,32
[2.545 0.052] [0.150] [0.125] [0.002]
3,81
3,18
0,05
BZE7S-2RQN8-C
DTE7S-2RQN8-C
DT, B300,
DPDT R300
3628 [128]
max.
64,39 1,32
[2.535 0.052] [0.160] [0.125] [0.065]
4,06
3,18
1,65
20 mm
20 mm
Inline Roller Plunger
(see Figure 11)
BZ, A300,
SPDT Q300
284 to 567
[10 to 20]
71,42
[2.812 ] Ref.
4,76
5,56
0,15
BZE7S-2RN2-C
BZE7S-2RN2-PG
DTE7S-2RN2-C
[0.188] [0.219] [0.006]
BZ, A300,
SPDT Q300
284 to 567
[10 to 20]
71,42
[2.812 ] Ref.
4,76 5,56 0,15
[0.188] [0.219] [0.006]
6,76 5,56 4,19
[0.266] [0.219] [0.165]
PG
13,5
DT, B300,
DPDT R300
1134 [40]
max.
69,44
[2.734 ] Ref.
Roller Lever
(see Figure 12)
20 mm
20 mm
BZ, A300,
SPDT Q300
227 to 567
[8 to 20]
5,94
5,56
0,15
BZE7S-2RN28-C
-
[0.234] [0.219] [0.006]
One-Way Roller
Lever
(see Figure 13)
sensing.honeywell.com
11
E7 and V7 Series
DIMENSIONS
Figure 10. E7S Series, top pin plunger, side mount with boot
seal
Figure 11. E7S Series, inline roller plunger, side mount, sealed
3,8 [0.15] pretravel
1,93 [0.076] pretravel
Ø 8,38 [Ø 0.33]
Ø 16,66 x 4,95 wide roller
[Ø 0.656 x 0.195]
Internal plunger seal
Ø 16,0 [Ø 0.63]
38,58
OP
[1.519]
59,56
OP
(2) Ø 5,16
[Ø 0.203]
mounting holes
[2.345]
13,97
[0.55]
(2) Ø 5,16
[Ø 0.203]
mounting holes
13,97
[0.55]
25,4
[1.00]
25,4
[1.00]
Ø 14,73
[Ø 0.58]
25,4
[1.00]
25,4
Ø 14,73
[Ø 0.58]
[1.00]
5,84 [0.23]
12,7 [0.50]
conduit
4,06 [0.16]
62,28 [2.69]
centerline
76,40 [3.01]
5,84 [0.23]
12,7 [0.50]
conduit
centerline
4,06 [0.16]
76,40 [3.01]
62,28 [2.69]
Figure 12. E7S Series, roller lever, side mount with boot seal
Figure 13. E7S Series, one-way roller lever, side mount with
boot seal
Ø 19,05 x 7,92 wide roller
[Ø 0.75 x 0.312]
39,88
[1.57]
39,6
Ø 19,0 [0.75] x
7,9 [0.31] W
roller
[1.56]
18,29
[0.72]
24,38
[0.91]
18,3
[0.72]
225°
32,26
[1.27]
180°
48,11
[1.894]
48,11
[1.894]
(2) Ø 5,16
[Ø 0.203]
mounting holes
13,97
[0.55]
(2) Ø 5,16
[Ø 0.203]
mounting holes
13,97
[0.55]
25,4
[1.00]
25,4
Ø 14,73
[Ø 0.58]
[1.00]
25,4
Ø 14,73
[Ø 0.58]
[1.00]
25,4
[1.00]
5,84 [0.23]
4,06 [0.16]
62,28 [2.69]
12,7 [0.50]
conduit
centerline
5,84 [0.23]
12,7 [0.50]
conduit
centerline
76,40 [3.01]
4,06 [0.16]
76,40 [3.01]
62,28 [2.69]
sensing.honeywell.com
12
MICRO SWITCH™ Medium-Duty Limit Switches
Table 8. Order Guide • E7S Series Switches, Side or Diagonal Mount without Boot Sealed Actuator
For catalog listings not shown, please contact your Honeywell distributor or representative.
Catalog Listing
BZ, A300,
SPDT Q300
255 to 369
[9 to 13]
38,1 0,89
[1.5 0.035]
0,38
5,56
0,05
BZE7S-2RQ-C
20 mm
[0.015] [0.219] [0.002]
BZ, A300,
SPDT Q300
255 to 369
[9 to 13]
38,1 0,89
[1.5 0.035]
0,38
5,56
0,05
PG
13,5
BZE7S-2RQ-PG
[0.015] [0.219] [0.002]
Pin Plunger
(see Figure 14)
BZ, A300,
SPDT Q300
BZ, A300,
SPDT Q300
BZ, A300,
SPDT Q300
255 to 369
[9 to 13]
49,61 1,32
0,38
3,56
[0.14] [0.002]
3,56 0,05
[0.14] [0.002]
3,56 0,05
[0.14] [0.002]
0,05
BZE7S-2RQ8-C
BZE7S-2RQ8-PG
BZE7S-2RQ9-C1
20 mm
[1.953 0.052] [0.015]
49,61 1,32 0,38
[1.953 0.052] [0.015]
49,61 1,32 0,38
[1.953 0.052] [0.015]
255 to 369
[9 to 13]
PG
13,5
255 to 369
[9 to 13]
Removable
roller
20 mm
20 mm
Roller
DT, B300, 680 to 1361
DPDT R300 [24 to 48]
49,61 1,19
[1.953 0.047] [0.14]
3,56
3,18
1,65
DTE7S-2RQ9-C
DTE7S-2RQ9-PG
plunger may
be rotated to
any position
around C/L
of plunger
[0.125] [0.065]
Inline Roller Plunger
(see Figure 15)
DT, B300, 680 to 1361
DPDT R300
49,61 1,19
[1.953 0.047] [0.14]
3,56
3,18
1,65
PG
13,5
[24 to 48]
[0.125] [0.066]
BZ, A300,
SPDT Q300
255 to 369
[9 to 13]
49,61 1,32
[1.953 0.052] [0.015]
0,38
3,56
[0.14] [0.002]
0,05
BZE7S-2RQ81-C
20 mm
Cross Roller
Plunger
(see Figure 16)
BZ, A300,
SPDT Q300
284 to 510
[10 to 18]
61,11 [2.406]
Ref
4,78
5,56
0,15
BZE7S-2RQ2-C
20 mm
[0.188] [0.219] [0.006]
Roller Lever
(see Figure 17)
1 With roller removed, plunger can be rotated 90° and roller re-assembled for a cross roller plunger.
sensing.honeywell.com
13
E7 and V7 Series
DIMENSIONS
Figure 14. E7S Series, top pin plunger, side mount
Figure 15. E7S Series, inline roller plunger, side mount
0,38 [0.015] pretravel
Ø 8,38 [Ø 0.33]
0,4 [0.015] pretravel
Ø 12,7 x 4,5 wide roller
[Ø 0.50 x 0.18]
44,5
OP
33,02
[1.30]
OP
(2) Ø 5,16
[Ø 0.203]
mounting holes
[1.75]
13,97
[0.55]
(2) Ø 5,16
[Ø 0.203]
mounting holes
13,97
[0.55]
25,4
[1.00]
25,4
[1.00]
Ø 14,73
[Ø 0.58]
25,4
[1.00]
Ø 14,73
[Ø 0.58]
25,4
[1.00]
5,84 [0.23]
12,7 [0.50]
conduit
centerline
4,06 [0.16]
62,28 [2.69]
5,84 [0.23]
12,7 [0.50]
conduit
centerline
4,06 [0.16]
62,28 [2.69]
76,40 [3.01]
76,40 [3.01]
Figure 16. E7S Series, cross roller lever, side mount
Figure 17. E7S Series, roller lever, side mount
Ø 19,0 [0.75] x
7,9 [0.312] W
roller
Ø 12,7 x 4,57
0,38 [0.015] pretravel
39,6
[1.57]
[Ø 0.50 x 0.18]
Wide roller
18,3
[0.72]
225°
23,1
[0.91]
44,53
OP
[1.75]
(2) Ø 5,16
[Ø 0.203]
mounting holes
13,97
[0.55]
37,8
[1.49]
(2) Ø 5,16
[Ø 0.203]
mounting holes
13,97
[0.55]
25,4
[1.00]
Ø 14,73
[Ø 0.58]
25,4
[1.00]
25,4
[1.00]
25,4
[1.00]
Ø 14,73
[Ø 0.58]
5,84 [0.23]
12,7 [0.50]
conduit
centerline
4,06 [0.16]
62,28 [2.69]
76,40 [3.01]
5,84 [0.23]
12,7 [0.50]
conduit
4,06 [0.16]
62,28 [2.69]
centerline
76,40 [3.01]
sensing.honeywell.com
14
MICRO SWITCH™ Medium-Duty Limit Switches
Table 9. Order Guide • E9 Series Switches, Side Mount with Sealed Actuator and Two Conduits
For catalog listings not shown, please contact your Honeywell distributor or representative.
Catalog Listing
BZ, A300,
SPDT Q300
BZ, A300,
SPDT Q300
255 to 680
[9 to 24]
38,58 0,76
[1.519 0.030] [0.078] [0.219] [0.002]
38,58 0,76 1,98 5,56 0,05
[1.519 0.030] [0.078] [0.219] [0.002]
1,98
5,56
0,05
BZE9-2RN-C
20 mm
255 to 680
[9 to 24]
PG
13,5
BZE9-2RN-PG
BZ, A300,
SPDT Q300
255 to 680
[9 to 24]
38,58 0,76
[1.519 0.030] [0.078] [0.219] [0.002]
1,98
5,56
0,05
BZE9-2RN-PG11
BZE9-2RQN8-PG
PG 11
Pin Plunger
(see Figure 18)
Roller
plunger
assembly
can be
BZ, A300,
SPDT Q300
3628 [128]
max.
59,56 1,19
[2.345 0.047] [0.150] [0.125] [0.002]
3,81
3,18
0,05
PG
13,5
positioned
at 90°
increments
Inline Roller Plunger
(see Figure 19)
BZ, A300,
SPDT Q300
284 to 567
[10 to 20]
66,34 [2.612]
Ref
4,78
5,56
0,20
BZE9-2RN2-C
20 mm
[0.188] [0.219] [0.008]
BZ, A300,
SPDT Q300
284 to 567
[10 to 20]
66,34 [2.612]
Ref
4,78
5,56
0,20
PG
13,5
BZE9-2RN2-PG
Roller Lever
[0.188] [0.219] [0.008]
(see Figure 20)
BZ, A300,
SPDT Q300
227 to 256
[8 to 20]
5,94
5,56
0,15
PG
13,5
BZE9-2RN28-PG
-
[0.234] [0.219] [0.006]
One-Way Roller
Lever
(see Figure 21)
sensing.honeywell.com
15
E7 and V7 Series
DIMENSIONS
Figure 18. E9 Series, top pin plunger, side mount with boot
seal
Figure 19. E9 Series, inline roller plunger, side mount with
seal
3,8 [0.15] pretravel
1,98 [0.078] pretravel
Ø 8,38 [Ø 0.33]
Ø 16,66 x 4,95 wide roller
[Ø 0.656 x 0.195]
Internal plunger seal
38,58
OP
[1.519]
(2) Ø 5,16
[Ø 0.203]
mounting holes
Ø 16,0 [Ø 0.63]
59,56
OP
14
[0.55]
[2.345]
(2) Ø 5,16
[Ø 0.203]
mounting holes
14
[0.55]
31,2
[1.23]
Ø 14,73 (2)
[Ø 0.58]
31,2
[1.23]
4,3 [0.17]
Ø 14,73 (2)
[Ø 0.58]
12,7 [0.50] (2)
conduit
centerline
76,0 [2.99]
84,6 [3.33]
4,3 [0.17]
12,7 [0.50] (2)
conduit
centerline
76,0 [2.99]
84,6 [3.33]
Figure 20. E9 Series, roller lever, side mount with boot seal
Figure 21. E9 Series, one-way roller lever, side mount with
boot seal
Ø 19,05 x 7,11 wide roller
[Ø 0.75 x 0.312]
39,88
[1.57]
Ø 19,05 [0.75] x
39,6
7,92 [0.31] W
[1.56]
roller
18,29
[0.72]
23
[0.906]
18,3
[0.72]
225°
32,26
[1.27]
180°
48,11
[1.894]
48,11
[1.894]
14
[0.55]
(2) Ø 5,16
[Ø 0.203]
mounting holes
14
[0.551]
31,2
[1.23]
Ø 14,73 (2)
[Ø 0.58]
31,2
[1.23]
Ø 14,73 (2)
[Ø 0.58]
4,3 [0.17]
76,0 [2.99]
84,6 [3.33]
12,7 [0.50] (2)
conduit
centerline
4,3 [0.17]
12,7 [0.50] (2)
conduit
centerline
76,0 [2.99]
84,6 [3.33]
sensing.honeywell.com
16
MICRO SWITCH™ Medium-Duty Limit Switches
Table 10. Order Guide • E9 Series Switches, Side Mount without Boot Sealed Actuator and Two Conduits
For catalog listings not shown, please contact your Honeywell distributor or representative.
Catalog Listing
BZ, A300,
SPDT Q300
255 to 369
[9 to 13]
28,70 0,76
[1.30 0.030] [0.015] [0.219] [0.002]
0,38
5,56
0,05
PG
13,5
BZE9-2RQ-PG
Pin Plunger
(see Figure 22)
BZ, A300,
SPDT Q300
255 to 369
[9 to 13]
44,53 1,19
[1.753 0.047] [0.015] [0.140] [0.002]
0,38
3,56
0,05
BZE9-2RQ8-C
20 mm
BZ, A300,
SPDT Q300
255 to 369
[9 to 13]
44,53 1,19
[1.753 0.047] [0.015] [0.140] [0.002]
0,38
3,56
0,05
PG
13,5
BZE9-2RQ8-PG
Inline Roller Plunger
(see Figure 23)
BZ, A300,
SPDT Q300
255 to 369
[9 to 13]
44,53 1,19
[1.753 0.047] [0.015] [0.140] [0.002]
0,38
3,56
0,05
PG
13,5
BZE9-2RQ81-PG
Cross Roller
Plunger
(see Figure 24)
BZ, A300,
SPDT Q300
284 to 510
[10 to 18]
56,03 [2.206]
Ref.
4,78
5,56
0,15
PG
13,5
BZE9-2RQ2-PG
[0.188] [0.219] [0.006]
Roller Lever
(see Figure 25)
sensing.honeywell.com
17
E7 and V7 Series
DIMENSIONS
Figure 22. E9 Series, top pin plunger, side mount
Figure 23. E9 Series, inline roller plunger, side mount
0,38 [0.015] pretravel
Ø 8,38 [Ø 0.33]
0,4 [0.015] pretravel
Ø 12,7 x 4,5 wide roller
[Ø 0.50 x 0.18]
44,5
OP
33,02
OP
[1.75]
(2) Ø 5,16
[Ø 0.203]
mounting holes
[1.30]
(2) Ø 5,16
13,97
[0.55]
[Ø 0.203]
14
mounting holes
[0.55]
31,2
[1.23]
Ø 14,73 (2)
[Ø 0.58]
31,2
[1.23]
Ø 14,73 (2)
[Ø 0.58]
4,3 [0.17]
76,0 [2.99]
84,6 [3.33]
12,7 [0.50] (2)
conduit
centerline
4,3 [0.17]
12,7 [0.50] (2)
conduit
centerline
76,0 [2.99]
84,6 [3.33]
Figure 24. E9 Series, cross roller lever, side mount
Figure 25. E9 Series, roller lever, side mount
Ø 12,7 x 4,57
[Ø 0.50 x 0.18]
wide roller
Ø 19,0 [0.75] x
7,9 [0.312] W
0,4 [0.015] pretravel
39,6
[1.56]
roller
18,3
[0.72]
225°
23,1
[0.91]
44,53
OP
[1.75]
(2) Ø 5,16
[Ø 0.203]
14
mounting holes
[0.55]
37,8
[1.49]
(2) Ø 5,16
[Ø 0.203]
mounting holes
14
[0.55]
31,2
[1.23]
Ø 14,73 (2)
[Ø 0.58]
31,2
[1.23]
4,3 [0.17]
Ø 14,73 (2)
[Ø 0.58]
12,7 [0.50] (2)
conduit
centerline
76,0 [2.99]
84,6 [3.33]
4,3 [0.17]
12,7 [0.50] (2)
conduit
centerline
76,0 [2.99]
84,6 [3.33]
sensing.honeywell.com
18
MICRO SWITCH™ Medium-Duty Limit Switches
Table 11. Order Guide • V7 Series Switches, Flange Mount with Boot Sealed Actuator
For catalog listings not shown, please contact your Honeywell distributor or representative.
Catalog Listing
BZ, A300,
SPDT Q300
255 to 680
[9 to 24]
69,85 1,57
[2.75 0.062] [0.078] [0.219] [0.002]
1,98
5,56
0,05
BZV7-2RN-C
20 mm
BZ, A300,
SPDT Q300
255 to 680
[9 to 24]
69,85 1,57
[2.75 0.062] [0.078] [0.219] [0.002]
1,98
5,56
0,05
PG
13,5
BZV7-2RN-PG
Pin Plunger
(see Figure 26)
BZ, A300,
SPDT Q300
284 to 567
[10 to 20]
97,59 [3.842]
Ref.
4,78
5,56
0,20
BZV7-2RN2-C
20 mm
[0.188] [0.219] [0.008]
BZ, A300,
SPDT Q300
284 to 567
[10 to 20]
97,59 [3.842]
Ref.
4,78
5,56
0,20
PG
13,5
BZV7-2RN2-PG
Roller Lever
(see Figure 27)
[0.188] [0.219] [0.008]
DIMENSIONS
Figure 26. V7 Series, top pin plunger, flange mount with boot
seal
Figure 27. V7 Series, roller lever, flange mount with booth seal
Ø 19,05 x 7,92 wide roller
1,93 [0.076] pretravel
Ø 8,38 [Ø 0.33]
[Ø 0.75 x 0.312]
39,88
[1.57]
18,29
[0.72]
24,38
[0.91]
225°
69,85 OP
[2.75]
45,21
48,11
[1.894]
[1.78]
10,59
[0.42]
Ø 14,73
[Ø 0.58]
13,97
[0.55]
12,7 [0.50]
3,18
[0.125]
base
34,01[1.34]
conduit centerline
(2) Ø 5,16 [Ø 0.203]
mounting holes
5,84
[0.23]
10,59
[0.42]
25,4
[1.00]
76,4 [3,01]
Ø 14,73
[Ø 0.58]
12,7 [0.50]
conduit centerline
3,18
[0.125]
base
4,06 [0.16]
34,01[1.34]
(2) Ø 5,16 [Ø 0.203]
mounting holes
76,40 [3,01]
sensing.honeywell.com
19
E7 and V7 Series
Table 12. Order Guide • V7 Series Switches, Flange Mount without Boot Sealed Actuator
For catalog listings not shown, please contact your Honeywell distributor or representative.
Catalog Listing
BZ, A300,
SPDT Q300
255 to 369
[9 to 13]
63,5 1,19
[2.50 0.047] [0.015] [0.219] [0.002]
0,38
5,56
0,05
PG
13,5
BZV7-2RQ-PG
Pin Plunger
(see Figure 28)
BZ, A300,
SDPT Q300
255 to 369
[9 to 13]
75,01 1,52
[2.953 0.060] [0.015] [0.140] [0.002]
0,38
3,56
0,05
BZV7-2RQ8-C
20 mm
BZ, A300,
SDPT Q300
255 to 369
[9 to 13]
75,01 1,52
[2.953 0.060] [0.015] [0.140] [0.002]
0,38
3,56
0,05
PG
13,5
BZV7-2RQ8-PG
Inline Roller Plunger
(see Figure 29)
BZ, A300,
SPDT Q300
255 to 369
[9 to 13]
75,01 1,52
[2.953 0.060] [0.015] [0.140] [0.002]
0,38
3,56
0,05
BZV7-2RQ81-C
20 mm
BZ, A300,
SPDT Q300
255 to 369
[9 to 13]
75,01 1,52
[2.953 0.060] [0.015] [0.140] [0.002]
0,38
3,56
0,05
PG
13,5
Cross Roller
Plunger
(see Figure 30)
BZV7-2RQ81-PG
BZV7-2RQ2-C
BZV7-2RQ2-PG
BZ, A300,
SPDT Q300
284 to 510
[10 to 18]
87,27 [3.436]
Ref.
4,78
5,56
0,15
20 mm
[0.188] [0.219] [0.006]
BZ, A300,
SPDT Q300
284 to 510
[10 to 18]
87,27 [3.436]
Ref.
4,78
5,56
0,15
PG
13,5
[0.188] [0.219] [0.006]
Roller Lever
(see Figure 31)
sensing.honeywell.com
20
MICRO SWITCH™ Medium-Duty Limit Switches
DIMENSIONS
Figure 28. V7 Series, top pin plunger, flange mount
Figure 29. V7 Series, inline roller plunger, flange mount
0,4 [0.015] pretravel
0,38 [0.015] pretravel
Ø 8,38 [Ø 0.33]
Ø 12,7 x 4,5 wide roller
[Ø 0.50 x 0.18]
44,5
[1.75]
OP
33,02
[1.30]
OP
13,97
13,97
[0.55]
[0.55]
25,4
[1.00]
5,84
[0.23]
10,59
[0.42]
25,4
[1.00]
5,84
[0.23]
Ø 14,73
[Ø 0.58]
10,59
[0.42]
Ø 14,73
[Ø 0.58]
12,7 [0.50]
3,18
[0.125]
base
4,06 [0.16]
34,01[1.34]
12,7 [0.50]
conduit centerline
(2) Ø 5,16 [Ø 0.203]
mounting holes
3,18
[0.125]
base
conduit centerline
(2) Ø 5,16 [Ø 0.203]
mounting holes
4,06 [0.16]
34,01[1.34]
76,40 [3,01]
76,40 [3,01]
Figure 30. V7 Series, cross roller plunger, flange mount
Figure 31. V7 Series, roller lever, flange mount
Ø 19,0 [0.75] x
7,9 [0.312] W
roller
Ø 12,7 x 4,57
[Ø 0.50 x 0.18]
wide roller
0,38 [0.015] pretravel
39,6
[1.57]
18,3
[0.72]
44,53
[1.75]
225°
23,1
[0.91]
OP
13,97
[0.55]
37,8
[1.49]
25,4
[1.00]
5,84
[0.23]
10,59
[0.42]
13,97
[0.55]
Ø 14,73
[Ø 0.58]
12,7 [0.50]
25,4
[1.00]
3,18
[0.125]
base
5,84
[0.23]
10,59
[0.42]
4,06 [0.16]
34,01[1.34]
conduit centerline
(2) Ø 5,16 [Ø 0.203]
mounting holes
Ø 14,73
[Ø 0.58]
76,40 [3,01]
12,7 [0.50]
conduit centerline
3,18
[0.125]
base
4,06 [0.16]
34,01[1.34]
(2) Ø 5,16 [Ø 0.203]
mounting holes
76,40 [3,01]
sensing.honeywell.com
21
E7 and V7 Series
This Honeywell datasheet supports the following MICRO SWITCH™ E7/V7 Series Limit Switch Listings
BZE7-2RN2-PG
BZE7-2RN-PG
BZE7-2RQ8-PG
BZE7-2RQ81C
BZE7-2RN18-PG
BZE7-2RQN8-C
BZE7-2RQ-PG
BZE7S-2RN-PG
BZE9-2RQ-PG
BZE7-2RN18-C
BZE7-2RN18-CN14
BZE7-2RN2-6NC
BZE7-2RN28-C
BZE7-2RN28-PG
BZE7-2RN2-C
BZE7-2RN2-CN6
BZE72RNC
BZE7-2RQ2-C
BZE72RQ2PG
BZE7-2RQ2-PG
BZE7-2RQ81-C
BZE7-2RQ81-PG
BZE7-2RQ8-C
BZE7-2RQ9-C
BZE7-2RQ9-PG
BZE7-2RQ-C
BZE7S-2RQ-C
BZE7S-2RQN8-C
BZE7S-2RQ-PG
BZE9-2RN28-PG
BZE9-2RN2-C
BZE9-2RN2-PG
BZE9-2RN-C
BZE9-2RN-PG
BZE9-2RN-PG11
BZE9-2RQ2-PG
BZE9-2RQ81-PG
BZE9-2RQ8-C
BZE9-2RQ8-PG
BZE9-2RQN8-PG
BZV7-2RN2-C
BZV7-2RN2-PG
BZV7-2RN-C
BZV7-2RQ81-PG
BZV7-2RQ8-C
BZV7-2RQ8-PG
BZV7-2RQ-PG
DTE7-2RN28-C
DTE7-2RN2-C
DTE72RN2PG
DTE7-2RN2-PG
DTE7-2RN-C
BZE72RQN8C
BZE7-2RQN8-PG
BZE7S-2RN
DTE72RNPG
DTE7-2RN-PG
DTE7-2RQN8-C
DTE7-2RQN8PC
DTE72RQN8PG
DTE7-2RQN8-PG
DTE7S-2RN2-C
DTE7S-2RN-C
DTE7S-2RQ9-C
DTE7S-2RQ9-PG
DTE7S-2RQN8-C
BZE7S-2RN28-C
BZE7S-2RN2-C
BZE7S-2RN2-PG
BZE7S-2RN-C
BZE7S-2RQ2-C
BZE7S-2RQ81-C
BZE7S-2RQ8-C
BZE7S-2RQ8-PG
BZE7S-2RQ9-C
BZE7-2RN-C
BZE7-2RN-CN5
BZE7-2RN-D
BZV7-2RN-PG
BZV7-2RQ2-C
BZV7-2RQ2-PG
BZV7-2RQ81-C
BZE72RNPG
sensing.honeywell.com
22
MICRO SWITCH™ Medium-Duty Limit Switches
ADDITIONAL INFORMATION
WARNING
The following associated literature is available on the Honeywell web
PERSONAL INJURY
site at sensing.honeywell.com:
DO NOT USE these products as safety or emergency stop
devices or in any other application where failure of the
product could result in personal injury.
• Product installation instructions
• Product range guide
• Product nomenclature tree
Failure to comply with these instructions could result in
death or serious injury.
• Product application-specific information
– Limit and enclosed switch reference standards
WARNING
MISUSE OF DOCUMENTATION
•
The information presented in this product sheet is for
reference only. Do not use this document as a product
installation guide.
•
Complete installation, operation, and maintenance
information is provided in the instructions supplied with
each product.
Failure to comply with these instructions could result in
death or serious injury.
WARRANTY/REMEDY
Honeywell warrants goods of its manufacture as being free of
defective materials and faulty workmanship. Honeywell’s standard
product warranty applies unless agreed to otherwise by Honeywell
in writing; please refer to your order acknowledgement or consult
your local sales office for specific warranty details. If warranted
goods are returned to Honeywell during the period of coverage,
Honeywell will repair or replace, at its option, without charge those
items it finds defective. The foregoing is buyer’s sole remedy
and is in lieu of all other warranties, expressed or implied,
including those of merchantability and fitness for a particu-
lar purpose. In no event shall Honeywell be liable for conse-
quential, special, or indirect damages.
While we provide application assistance personally, through our
literature and the Honeywell website, it is up to the customer to
determine the suitability of the product in the application.
Specifications may change without notice. The information we
supply is believed to be accurate and reliable as of this printing.
However, we assume no responsibility for its use.
sensing.honeywell.com
23
Find out more
Honeywell serves its customers
through a worldwide network
of sales offices, representatives
and distributors. For application
assistance, current specifications,
pricing or name of the nearest
Authorized Distributor, contact
your local sales office.
To learn more about Honeywell’s
sensing and control products,
call +1-815-235-6847 or
1-800-537-6945,
visit sensing.honeywell.com,
or e-mail inquiries to
info.sc@honeywell.com
Sensing and Control
Honeywell
1985 Douglas Drive North
Golden Valley, MN 55422
honeywell.com
002393-1-EN IL50 GLO
March 2015
Copyright © 2015 Honeywell International Inc. All rights reserved.
相关型号：
BZE7S-2RN2-C
Snap Acting/Limit Switch, SPDT, Momentary, 0.5A, 250VDC, 10.34mm, Wire Terminal, Top Roller Arm Actuator, Panel Mount
HONEYWELL
BZE7S-2RN2-PG
Snap Acting/Limit Switch, SPDT, Momentary, 0.5A, 250VDC, 10.34mm, Wire Terminal, Top Roller Arm Actuator, Panel Mount
HONEYWELL
BZE7S-2RQ-C
Snap Acting/Limit Switch, SPDT, Momentary, 0.5A, 250VDC, 5.94mm, Wire Terminal, Top Plunger Actuator, Panel Mount
HONEYWELL
BZE7S-2RQ-PG
Snap Acting/Limit Switch, SPDT, Momentary, 0.5A, 250VDC, 5.94mm, Wire Terminal, Top Plunger Actuator, Panel Mount
HONEYWELL
BZE7S-2RQ2-PG
Snap Acting/Limit Switch, SPDT, Momentary, 0.5A, 250VDC, 10.34mm, Wire Terminal, Top Roller Arm Actuator, Panel Mount
HONEYWELL
BZE7S-2RQ8-C
Snap Acting/Limit Switch, SPDT, Momentary, 0.5A, 250VDC, 3.93mm, Wire Terminal, Top Roller Plunger Actuator, Panel Mount
HONEYWELL
BZE7S-2RQ8-PG
Snap Acting/Limit Switch, SPDT, Momentary, 0.5A, 250VDC, 3.93mm, Wire Terminal, Top Roller Plunger Actuator, Panel Mount
HONEYWELL
BZE7S-2RQN8-C
Snap Acting/Limit Switch, SPDT, Momentary, 0.5A, 250VDC, 6.36mm, Wire Terminal, Cross Roller Plunger (90 Degree Rotated Actuator, Panel Mount
HONEYWELL
BZE9-2RN-C
Snap Acting/Limit Switch, SPDT, Momentary, 0.5A, 125VDC, 7.54mm, Screw Terminal, Hardened Steel Plunger Actuator, Panel Mount
HONEYWELL
BZE9-2RN-P.G
Snap Acting/Limit Switch, SPDT, Momentary, 0.5A, 125VDC, 7.54mm, Screw Terminal, Hardened Steel Plunger Actuator, Panel Mount
HONEYWELL
BZE9-2RN-P.G.11
Snap Acting/Limit Switch, SPDT, Momentary, 0.5A, 125VDC, 7.54mm, Screw Terminal, Hardened Steel Plunger Actuator, Panel Mount
HONEYWELL
©2020 ICPDF网 联系我们和版权申明