2CPSA2A3B_技术文档

MICRO SWITCH Cable-Pull Safety Switches

004785

CPS Series

Issue 4

Datasheet

FEATURES

• Direct opening action of NC (Normally Closed) contacts

• 2CPS: 2NO/2NC, 1NO/3NC, or 4NC contact conﬁgurations

• 1CPS: 1NO/1NC, 2NO/2NC, 1NO/3NC, or 4NC contact

conﬁgurations

• Typical cable span of 76 m [250 ft] in an environment with

a temperature change of 17 ꢀC [ 30 ꢀꢁ]. Longer spans

are possible depending upon temperature change and

installation

• Choice of three actuator conﬁgurations (2CPS)

• Removable contact block version available (2CPS)

• J-hook turnbuckle included (2CPS)

• Large wiring cavity with straight-through wiring

• Models avaliable without broken cable, slack-cable detection

• 24 Vdc or 120 Vac bright, multi-cluster high-intensity LED

status indicator light available on 2CPS. Single LED on 1CPS

• Gold-plated contacts are standard on 2CPS, available on

1CPS

DESCRIPTION

Honeywell’s MICRO SWITCH CPS Series Cable-Pull Safety

Switches provide a readily accessible emergency stop signal, a

cost-effective means compared to using multiple emergency

stop push-buttons. The CPS Series Cable Pull Safety Switch’s

internal mechanism latches on both slackened cable (push)

and pulled cable.

• Electrostatic, epoxy-coated, die-cast zinc housing

• Optional hardware packets available

The 1CPS is intended for use in applications where the cable

span is 76 m [250 ft] or shorter. It is an economical solution for

shorter runs or zone protection typical to automated systems.

The 2CPS Series is intended for use in very long cable runs of

152 m [500 ft] or shorter, such as long conveyor lines found in

warehouses.

POTENTIAL INDUSTRIAL APPLICATIONS

• Long conveyor systems found in warehouses and

distribution centers

• Conveyor systems with a high amount of vibration

• Conveyor systems that experience wide temperature swings

• Long conveyor systems where easy-through wiring, or highly

visible trip status, is required

• Perimeter guarding in hose-down conditions

• Packaging equipment

• Assembly lines

A line in the midpoint of the cable tension window indicates

proper cable tension, providing easy set-up. The direct opening

switch contacts are held closed when the actuating cable is

under proper tension and the reset knob is set to the RUN

position. When the actuating cable is pulled, slackened, or

broken, a cam positively opens the NC (Normally Closed)

switch contacts. The snap-action operation causes the switch

contacts to change state and mechanically latch almost

simultaneously when the cable is pulled, slackened, or broken.

The NC switch contacts remain open until the CPS is reset by

properly tensioning the cable and manually rotating the reset

knob.

VALUE TO CUSTOMERS

• Cost-effective means of providing an emergency stop signal

compared to multiple emergency stop push buttons

• Capability enhances productivity by minimizing nuisance

stops due to variations in temperature, stretch of cable over

time, or other application variables

• Direct opening of normally closed contacts when cable is

actuated

When the direct opening switch contacts open, the auxiliary

contacts also actuate (open contacts close). The auxiliary

contacts are electrically isolated from the direct-opening

switch contacts. These NO (Normally Open) contacts may be

used for monitoring or signaling.

PORTFOLIO

The CPS Series is the largest switch in Honeywell’s MICRO

SWITCH line of safety switches. ꢁor more details on the

extensive line of Honeywell safety switches, click here.

DIFFERENTIATION

• Internal mechanism latches on both slackened cable (push)

and pulled cable

Sensing and Internet of Things

MICRO SWITCH Cable-Pull Safety Switches, CPS Series

Table 1. Speciﬁcations

Characteristic

Parameter

Description

cable-pull safety switches

1NO/1NC direct acting

2NO/2NC direct acting

1NO/3NC direct acting

4NC direct acting

Switching options

Sealing

IP67, NEMA 1, 4, 12, 13

Contacts

silver, gold plated over silver

Conduit/Connectors

1/2 NPT, PG 13.5, 20 mm, Pꢁ 1/2; Brad Harrison 10-pin conductor

ꢁorce to maintain actuation shaft 1CPS & 2CPS: 25 lb*

Actuation shaft operating force

Operating temperature

Storage temperature

1CPS & 2CPS: 40 lb*

-40 ꢀC to 80 ꢀC [-40 ꢀꢁ to 176 ꢀꢁ]

1CPS: -40 ꢀC to 85 ꢀC [-40 ꢀꢁ to 185 ꢀꢁ]

Mechanical endurance

Rated thermal current (I_th)

1 million operations

10 A

Rated impulse withstand (U_imp

Rated insulation voltage (U_i)

Useable gold-plated current

Pollution degree

)

2500 V

300 V

1 mA to 50 mA, 60 Vdc max./125 Vdc max.

3

Conditional short circuit current

1000 A

Short circuit protective device

(type/maximum rating)

Class J fuse (10 A/600 V)

Shock

15 g per IEC 68-2-27

Vibration

Approvals

10 Hz to 500 Hz, 5 g per IEC 68-2-6

UL, CSA, CE, SIL

• UL Listed per ꢁile E37138 against UL508

• CSA Certified per ꢁile 57323 against CSA C22.2 No. 14

• CE mark: The CPS complies with Low Voltage Directive 2006/95/EC; Machinery Directive

2006/42/EC only as the directives relate to the components being used in a safety function; EN

60947-1; EN 60947-5-1; EN 60947-5-5

Standards

• SIL: MCTꢁ (Mechanical Life): >1,000,000 cycles with single-sided confidence limit of 100 %.

MCTꢁ (Electrical Life): >25,000 cycles with single-sided confidence limit of 87.5 %.

Highest SIL Capability: SIL3 (HꢁT:1), IEC 61508-2: 2010. Proof Test Interval: 1 Year

* Incline measures, and not typical for manual trip

Table 2. Electrical Ratings

ac

dc

A300

Ue

AC15

Ie

Q300

Ue

DC13

Ie

Volts

–

Amps

Volts

24

Amps

2.8

–

6

3

120

125

250

0.55

0.27

240

Ith = 10 A

2

sensing.honeywell.com

MICRO SWITCH Cable-Pull Safety Switches, CPS Series

Figure 1. 1CPS Product Nomenclature and Order Guide

1CPS

A

-N

A

1

Conduit

Without

Broken

Cable

Indicator-Pilot

Light Code

Basic Switch

Code

Switch Type

1NO/1NC direct acting

1NO/1NC direct acting, gold contacts

Switch 1: 1NO/1NC

1CPS Series

Single-Head

Cable-Pull

Switch 1: 1NO/1NC

Switch 2: None

1/2 NPT

PG 13.5

20 mm

PF 1/2

24 Vdc LED

A

B

C

D

1

2

3

4

5

6

7

8

A

Detection

Switch 2: None

2NO/2NC direct acting

Switch 1: 1NO/1NC

Switch 2: 1NO/1NC

1NO/3NC direct acting

Switch 1: 1NO/1NC

Switch 2: 2NC

2NO/2NC direct acting, gold contacts

Switch 1: 1NO/1NC

Switch 2: 1NO/1NC

1NO/3NC direct acting, gold contacts

Switch 1: 1NO/1NC

Switch 2: 2NC

120 Vac LED

B

Safety Switch

4NC direct acting

Switch 1: 2NC

Switch 2: 2NC

4NC direct acting, gold contacts

Switch 1: 2NC

Switch 2: 2NC

NOTE: Not all combinations of model code are available.

Please contact your Honeywell provider/representative for assistance.

Figure 2. 2CPS Product Nomenclature and Order Guide

2CPS

A

1

A

1

Conduit

Contact

Mounting Code

Indicator-Pilot

Light Code

Actuation

Code

Basic Switch

Code

2NO/2NC, direct acting

Switch 1: 1NO/1NC

Switch 2: 1NO/1NC

Switch Type

2CPS Series

Dual-Head

Cable-Pull

Standard: contact

block mounted

to housing

24 Vdc LED

Maintained,

both sides

1/2 NPT

PG 13.5

20 mm

PF 1/2

A

B

C

D

A

cluster

1

2

3

4

5

6¹

A

B

D

1

Removeable:

contact blocks

with receptacles

1NO/3NC, direct acting

Switch 1: 1NO/1NC

Switch 2: 2NC

120 Vac LED

cluster

Maintained, left side

No actuation, right side

B

2

Safety Switch

4NC, direct acting

Switch 1: 2NC

Switch 2: 2NC

Maintained, right side

No actuation, left side

Maintained, both sides

w/o broken cable detection

Maintained, left side

NOTE: Not all combinations of model code are available.

Please contact your Honeywell provider/representative for assistance.

No actuation, right side

w/o broken cable detection

Maintained, right side

No actuation, left side

w/o broken cable detection

¹Not valid on 4NC switches

Sensing and Internet of Things

3

MICRO SWITCH Cable-Pull Safety Switches, CPS Series

Table 3. Circuitry Charts

TEMPERATUREꢀSPAN DISTANCE APPLICATION

Circuitry

Chart

INFORMATION

Cable-pull switches featuring broken cable detection require

1NO/1NC

pre-tensioning in order to enable the RUN condition.

The relative expansion or contraction of the steel actuating

cable when the ambient temperature increases or decreases

must be taken into account when pre-tensioning a cable pull

switch.

2NO/2NC

The change in cable length with change in temperature can

cause signiﬁcant nuisance shut downs on longer runs.

Install the system when the temperature is at the mid point of

the extremes. If a warehouse has a low temperature of 15.6 ꢀC

[60 ꢀꢁ]and a high of 32.2 ꢀC [90 ꢀꢁ], set up the system at the

midpoint 23.9 ꢀC [75 ꢀꢁ].

1NO/3NC

4NC

Use an endspring or another CPS at the opposite end of the

cable span to double the temperature tolerance and to meet

the requirements of EN 418.

Figure 3. Total Temperature Variation vs. Cable Span

Distance

Table 4. 1CPS Contact Blocks

= grounding screw

4

sensing.honeywell.com

MICRO SWITCH Cable-Pull Safety Switches, CPS Series

Table 5. 2CPS Contact Blocks

Removable Contact Blocks with

Contact Block Mounted to Housing

Heavy-Duty Wiring Receptacles

A = grounding screw

2NO/2NC

1NO/3NC

4NC

Sensing and Internet of Things

5

MICRO SWITCH Cable-Pull Safety Switches, CPS Series

Table 6. 1CPS With Broken Cable Detection Order Guide

Bar Chart

Catalog

Listing

Contact

Material

Conduit Switching ¢ Contact Closed | ¨ Contact Open

Notes

1CPSA1

1CPSA1A

1CPSA1B

1CPSA5

1CPSC1

1CPSC1A

1CPSC5

1CPSA2

1CPSA2A

1CPSA2B

1CPSA6

1CPSA6A

1CPSA6B

1CPSC2

1CPSC2A

1CPSC2B

1CPSC6

1CPSC6A

1CPSA3

1CPSA3A

1/2 in NPT 1NO/1NC

silver alloy

gold-plated

silver alloy

gold-plated

silver alloy

gold-plated

silver alloy

gold-plated

silver alloy

–

ü

9,9

0

[0.39]

12,7

[0.5]

Left 21-22

Switch 13-14

7,9

3,8

7,9

12,7

1/2 in NPT 1NO/1NC

ü

[0.31] [0.15] [0.15] [0.31]

[0.5]

20 mm

1NO/1NC

Proper

Slackened

cable

Pulled

cable

ü

tension

1/2 in NPT 2NO/2NC

ü

0

9,9

[0.39]

9,9

[0.39]

12,7

[0.5]

7,9

3,8

7,9

12,7

[0.5]

[0.31] [0.15] [0.15] [0.31]

Left 21-22

Switch 13-14

Right 21-22

Switch 13-14

20 mm

2NO/2NC

Proper

cable

Slackened

cable

Pulled

cable

tension

ü

1/2 in NPT 1NO/3NC

10-pin Brad

Harrison con-

nector; actuator

to right

1CPSA3A-ꢁ01 1/2 in NPT 1NO/3NC

1CPSA3A-ꢁ02 1/2 in NPT 1NO/3NC

silver alloy

0

9,9

[0.39]

9,9

[0.39]

12,7

[0.5]

Left 21-22

7,9

3,8

7,9

12,7

[0.5]

[0.31] [0.15] [0.15] [0.31]

10-pin Brad

Harrison con-

nector; actuator

to left

Switch 13-14

Right 11-12

Switch 21-22

ü

Proper

1CPSA3B

1CPSA7

1CPSC3

1CPSC3A

1CPSC7

1/2 in NPT 1NO/3NC

silver alloy

gold-plated

silver alloy

gold-plated

ü

–

cable

Slackened

cable

Pulled

cable

tension

20 mm

1NO/3NC

1CPSA4

1CPSA4B

1CPSA8

1CPSC4

1/2 in NPT 4NC

silver alloy

gold-plated

silver alloy

–

0

9,9

[0.39]

12,7

[0.5]

Left 11-12

Switch 21-22

Right 11-12

7,9

3,8

7,9

12,7

[0.5]

ü

[0.31] [0.15] [0.15] [0.31]

Switch 21-22

20 mm

4NC

Proper

cable

Pulled

cable

Slackened

cable

1CPSC8

gold-plated

–

tension

6

sensing.honeywell.com

MICRO SWITCH Cable-Pull Safety Switches, CPS Series

Table 7. 1CPS Without Broken Cable Detection Order Guide

Bar Chart

Catalog

Listing

Contact

Material

Conduit Switching ¢ Contact Closed | ¨ Contact Open

Notes

9,9

[0.39]

1CPSA1-N

1/2 in NPT 1NO/1NC

silver alloy

–

7,9

[0.31]

12,7

[0.5]

0

Left 21-22

Switch 13-14

1CPSA1A-N

1/2 in NPT 1NO/1NC

ü

–

Pulled

1CPSA1B-N

1CPSA2-N

1/2 in NPT 1NO/1NC

1/2 in NPT 2NO/2NC

cable

silver alloy

ü

–

9,9

[0.39]

7,9

12,7

[0.5]

0

[0.31]

Left 21-22

Switch 13-14

Right 21-22

1CPSA2B-N

1/2 in NPT 2NO/2NC

silver alloy

–

Switch 13-14

Pulled

cable

9,9

[0.39]

7,9

[0.31]

12,7

[0.5]

0

Left 11-12

Switch 21-22

Right 11-12

1CPSA4B-N

1/2 in NPT 4NC

silver alloy

ü

–

Switch 21-22

Pulled

cable

Sensing and Internet of Things

7

MICRO SWITCH Cable-Pull Safety Switches, CPS Series

Table 8. 2CPS With Broken Cable Detection and Silver Alloy Contacts Order Guide

Bar Chart

¢ Contact Closed

¨ Contact Open

Catalog Listing

Notes

2CPSA1A1

1/2 in NPT 2NO/2NC

ü

Both

24

Vdcdc

2CPSA1A1A

10-pin Brad

24 Vdc Harrison

connector

2CPSA1A1A-ꢁW 1/2 in NPT 2NO/2NC

ü

Both

120

Vac

2CPSA1A1B

1/2 in NPT 2NO/2NC

2CPSA1A2

1/2 in NPT 2NO/2NC

ü

Left only

2CPSA1A2A

24 Vdc

10-pin Brad

24 Vdc Harrison

connector

2CPSA1A2A-ꢁW 1/2 in NPT 2NO/2NC

ü

Left only

120

Vac

2CPSA1A2B

1/2 in NPT 2NO/2NC

ü

Left only

2CPSA1A3

1/2 in NPT 2NO/2NC

ü

Right only

2CPSA1A3A

Right only 24 Vdc

10-pin Brad

Right only 24 Vdc Harrison

connector

2CPSA1A3A-ꢁW 1/2 in NPT 2NO/2NC

ü

0

9,9

[0.39]

12,7

[0.5]

Left 21-22

Switch 13-14

Right 21-22

7,9

3,8

7,9

12,7

[0.5]

[0.31] [0.15] [0.15] [0.31]

120

Right only

Vac

2CPSA1A3B

1/2 in NPT 2NO/2NC

2CPSA2A1

1/2 in NPT 2NO/2NC

ü

Both

Switch 13-14

Proper

2CPSA2A1A

Both

24 Vdc

cable

Slackened

cable

Pulled

cable

tension

120

Vac

2CPSA2A1B

1/2 in NPT 2NO/2NC

ü

Both

2CPSA2A2

1/2 in NPT 2NO/2NC

ü

Left only

2CPSA2A2A

24 Vdc

120

Vac

2CPSA2A2B

1/2 in NPT 2NO/2NC

ü

Left only

2CPSA2A3

1/2 in NPT 2NO/2NC

ü

Right only

2CPSA2A3A

Right only 24 Vdc

120

Right only

Vac

2CPSA2A3B

1/2 in NPT 2NO/2NC

ü

2CPSC1A1

2CPSC1A1A

2CPSC1A2

2CPSC1A2A

2CPSC1A3

2CPSC1A3A

2CPSC2A1A

20 mm

2NO/2NC

ü

Both

24 Vdc

Left only

Right only

Right only 24 Vdc

Both 24 Vdc

ü

8

sensing.honeywell.com

MICRO SWITCH Cable-Pull Safety Switches, CPS Series

Table 8. 2CPS With Broken Cable Detection and Silver Alloy Contacts Order Guide, continued

Bar Chart

¢ Contact Closed

¨ Contact Open

Catalog Listing

2CPSA1B1

Notes

1/2 in NPT 1NO/3NC

ü

Both

2CPSA1B1A

24 Vdc

10-pin Brad

24 Vdc Harrison

connector

2CPSA1B1A-ꢁ01 1/2 in NPT 1NO/3NC

ü

Both

120

Vac

2CPSA1B1B

1/2 in NPT 1NO/3NC

120

Vac

2CPSA1B2

1/2 in NPT 1NO/3NC

ü

Left only

2CPSA1B2A

24 Vdc

0

9,9

[0.39]

9,9

[0.39]

10-pin Brad

24 Vdc Harrison

connector

12,7

[0.5]

Left 21-22

7,9

3,8

7,9

12,7

[0.5]

2CPSA1B2A-ꢁ01 1/2 in NPT 1NO/3NC

ü

Left only

[0.31] [0.15] [0.15] [0.31]

Switch 13-14

Right 11-12

Switch 21-22

120

Vac

2CPSA1B2B

1/2 in NPT 1NO/3NC

ü

Left only

Proper

cable

tension

2CPSA1B3

1/2 in NPT 1NO/3NC

ü

Right only

Slackened

cable

Pulled

cable

2CPSA1B3A

Right only 24 Vdc

10-pin Brad

Right only 24 Vdc Harrison

connector

2CPSA1B3A-ꢁ01 1/2 in NPT 1NO/3NC

ü

120

Right only

Vac

2CPSA1B3B

1/2 in NPT 1NO/3NC

2CPSA2B1

1/2 in NPT 1NO/3NC

ü

Both

2CPSA2B1A

Both

24 Vdc

120

Vac

2CPSA2B1B

2CPSC1D1A

1/2 in NPT 1NO/3NC

ü

Both

0

9,9

[0.39]

9,9

[0.39]

12,7

[0.5]

Left 11-12

Switch 21-22

Right 11-12

7,9

3,8

7,9

12,7

[0.5]

[0.31] [0.15] [0.15] [0.31]

20 mm

4NC

ü

Both

24 Vdc

Switch 21-22

Proper

cable

Pulled

cable

Slackened

cable

tension

Sensing and Internet of Things

9

MICRO SWITCH Cable-Pull Safety Switches, CPS Series

Table 9. 2CPS Without Broken Cable Detection and With Silver Alloy Contacts Order Guide

Bar Chart

¢ Contact Closed

Catalog Listing

2CPSA1A4

¨ Contact Open

Notes

1/2 in NPT 2NO/2NC

ü

Both

2CPSA1A4B

2CPSA1A5B

2CPSA1A6B

2CPSA2A4A

2CPSA2A4B

Both

120 Vac

9,9

[0.39]

7,9

Left only

12,7

[0.5]

0

[0.31]

Left 21-22

Switch 13-14

Right 21-22

Switch 13-14

Right only 120 Vac

ü

Both

24 Vdc

120 Vac

Pulled

cable

No turnbuck-

les included

2CPSC1A4-ꢁ02

20 mm

2NO/2NC

ü

Both

10 sensing.honeywell.com

MICRO SWITCH Cable-Pull Safety Switches, CPS Series

Figure 4. 1CPS Dimensional Drawing

172,72 mm [6.8 in]

152,4 mm [6.0 in]

Indicator version only

6,6 mm

[0.26 in]

81,28 mm [3.2 in]

33,02 mm

88,9 mm [1.3 in]

[3.5 in]

12,7 mm

[0.5 in]

99,1 mm

[3.9 in]

76,2 mm

[3.0 in]

4 X Ø 7,37 mm

[4 X Ø 0.29 in]

53,34 mm

[2.1 in]

117,25 mm [4.616 in]

approx. at full travel

56,8 mm

[2.24 in]

50,82 mm

[2.001 in]

3X 25,4 mm

[3X 1.0 in]

65,2 mm

[2.57 in]

25,4 mm

[1.0 in]

3X conduit thread

4X mounting pad

Sensing and Internet of Things 11

MICRO SWITCH Cable-Pull Safety Switches, CPS Series

Figure 5. 2CPS Dimensional Drawing

40,39 mm

[1.59 in]

84,07 mm

[3.31 in]

66,8 mm

[2.63 in]

92,89 mm

[3.66 in]

323,85 mm [12.75 in] approx. at actuation

152,4 mm [6.0 in]

52,07 mm

40,39 mm

[1.59 in]

[2.05 in]

Manual reset button

12,7 mm

19,05 mm

[0.75 in]

2X 7,11 mm [0.28 in]

[0.5 in]

18,29 mm [0.72 in]

34,93 mm [1.375 in]

81,3 mm

[3.2 in]

2X 7,11 mm

[0.28 in]

2X 9,14 mm [0.36 in]

2X mounting pad

152,4 mm

[6 in]

104,78 mm [4.125 in]

Indicator version only

2X 31,75 mm [1.25 in]

12,7 mm [0.5 in]

3X conduit thread

57,15 mm

[2.25 in]

2X mounting pad

2X 6,9 mm [0.27 in]

139,7 mm [5.50 in]

3X 12,46 mm [0.845 in]

12 sensing.honeywell.com

MICRO SWITCH Cable-Pull Safety Switches, CPS Series

Figure 6. 1CPS Application Information

Figure 7. 2CPS Application Information

Sensing and Internet of Things 13

MICRO SWITCH Cable-Pull Safety Switches, CPS Series

Table 10. Accessories/Hardware Packets

Catalog Listing

CLSZC1

Accessory

Cable - 7,6 m [25 ft] length

Cable - 15,2 m [50 ft] length

Cable - 30,5 m [100 ft] length

Cable - 45,7 m [150 ft] length

Cable - 61 m [200 ft] length

Cable - 76,2 m [250 ft] length

CLSZC2

CLSZC3

CLSZC4

CLSZC5

CLSZC7

(2) Thimbles

(2) Low-proﬁle duplex cable clamps

CLSZTC

CLSZ1S

CPSZ1E

CPSZ1S

(1) Draw-bar endspring

M6 x 1 x 60 mm eyebolt

(1) Draw-bar endspring

(1) J-hook turnbuckle with lock nuts

(2) Thimbles

(2) Low-proﬁle duplex cable clamps

CPSZK1

(16) Sets of cable supports [(16) 1/4-20 eye bolts, (32) 1/4-20 nuts, (32) ﬂat washers, (16) lock washers]

European hardware packet

(1) J-hook turnbuckle with lock nuts

CPSZK2

(2) Thimbles

(2) Stainless steel cable clamps

(16) Sets of cable supports [(16) 1/4-20 eye bolts, (32) 1/4-20 nuts, (32) ﬂat washers, (16) lock washers]

CPSZTB

J-hook turnbuckle with lock nuts (included with 2CPS)

Multi-cluster LED accessory - 24 Vdc (conduit mount)

Multi-cluster LED accessory - 120 Vac (conduit mount)

Mounting bracket (to be used with 1CPS or 2CPS)

CPSLED24

CPSLED120

CPS-BRACKET

Figure 8. CPSLED Dimensional Drawing

Figure 9. CPS-Bracket

14 sensing.honeywell.com

m WARNING

ADDITIONAL MATERIALS

RISK TO LIFE OR PROPERTY

The following associated literature is available on the Honeywell

web site at sensing.honeywell.com:

Never use this product for an application involving serious

risk to life or property without ensuring that the system as a

whole has been designed to address the risks, and that this

product is properly rated and installed for the intended use

within the overall system.

•

Product line guide

Product part listing/nomenclature tree

Product range guide

Failure to comply with these instructions could result in

death or serious injury.

CPS troubleshooting guide

Electromechanical safety switch product selection guide

Application note: MICRO SWITCH switches in conveyor

applications

m WARNING

MISUSE OF DOCUMENTATION

•

The information presented in this product sheet is for

reference only. Do not use this document as a product

installation guide.

•

Complete installation, operation, and maintenance

information is provided in the instructions supplied with

each product.

Failure to comply with these instructions could result in

death or serious injury.

Warranty/Remedy

Honeywell warrants goods of its manufacture as being free of

defective materials and faulty workmanship during the appli-

cable warranty period. Honeywell’s standard product warranty

applies unless agreed to otherwise by Honeywell in writing;

please refer to your order acknowledgement or consult your

local sales ofﬁce for speciﬁc warranty details. If warranted

goods are returned to Honeywell during the period of coverage,

Honeywell will repair or replace, at its option, without charge

those items that Honeywell, in its sole discretion, ﬁnds defec-

tive. The foregoing is buyer’s sole remedy and is in lieu of all

other warranties, expressed or implied, including those of

merchantability and ﬁtness for a particular purpose. In no

event shall Honeywell be liable for consequential, special,

or indirect damages.

For more information

While Honeywell may provide application assistance personally,

through our literature and the Honeywell web site, it is buyer’s

sole responsibility to determine the suitability of the product in

the application.

Honeywell Sensing and Internet of

Things services its customers through a

worldwide network of sales ofﬁces and

distributors. ꢁor application assistance,

current speciﬁcations, pricing or the

nearest Authorized Distributor, visit

sensing.honeywell.com or call:

Speciﬁcations may change without notice. The information we

supply is believed to be accurate and reliable as of this writing.

However, Honeywell assumes no responsibility for its use.

Asia Paciﬁc

Europe

+65 6355-2828

+44 (0) 1698 481481

+1-800-537-6945

USA/Canada

Honeywell Sensing and Internet of Things

9680 Old Bailes Road

ꢁort Mill, SC 29707

004785-4-EN | 4 | 12/17

www. honeywell.com


型号：	2CPSA2A3B
厂家：	Honeywell
描述：	Snap Acting/Limit Switch, 4PST, Momentary, 2.8A, 24VDC, Connector Terminal, Panel Mount 开关
文件：	总15页 (文件大小：1911K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

2CPSA2A3B [HONEYWELL]

相关型号：

2CPSA2A4A

2CPSA2A4B

2CPSA2A6A

2CPSA2A6B

2CPSA2B1

2CPSA2B1A

2CPSA2B1B

2CPSA2B2

2CPSA2B2B

2CPSA2B3

2CPSA2B4A

2CPSA2B4B