25ET120-S [HONEYWELL]
Toggle Switch, SPDT, Latched, 4A, 28VDC, Screw Terminal, Lever Actuator, Panel Mount-threaded;型号: | 25ET120-S |
厂家: | Honeywell |
描述: | Toggle Switch, SPDT, Latched, 4A, 28VDC, Screw Terminal, Lever Actuator, Panel Mount-threaded 开关 光电二极管 |
文件: | 总7页 (文件大小:651K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MICRO SWITCH™ Magnetically Held Toggle Switches
ET Series
005433
Issue 1
Datasheet
FEATURES
• Most ET switches are designed and qualified to SAE AS55941
military standards to meet the required military or commercial
aircraft requirements
• Uniquely designed with an integral solenoid which provides
electrically maintained switch contacts (magnetic latching) for
circuit requirements
• The solenoid can be over-ridden with manual movement of the
toggle lever where immediate release is required
• Four different styles of lever actuators and three different types
of electrical termination
• Temperature range of -65 °C to 71 °C [-85 °F to 160 °F] to
accommodate applications in controlled and uncontrolled
temperature environments
DESCRIPTION
• Catalog listings available with up to four poles for control of
multiple circuits or providing redundant circuit capability
MICRO SWITCH™ ET Series toggle switches are a specialty
type of toggle switch with an electrical latching mechanism. The
latching mechanism (internal solenoid in the switch) is designed
to hold the momentary switch contacts closed once the toggle
switch has been manually actuated. An auxiliary set or remote
set of contacts opens the solenoid circuit of the switch and
releases the toggle lever mechanism while opening the switch
contacts which were held closed.
POTENTIAL APPLICATIONS
• Flight decks for commercial and military aircraft
• Flight decks for commercial and military helicopters
PORTFOLIO
In addition the the ET Series, Honeywell offers six series of
MICRO SWITCH™ toggle switches including the TL Series, NT
Series, TS Series, TW Series, and AT Series.
To fulfill a variety of applications, the ET toggle switches are
available with up to four poles, with two or three toggle lever
positions, with or without lever locks. Most ET Series toggle
switches mount in the popular size 15/32 inch diameter hole. ET
toggle switches are designed to the military standards of SAE
AS55941 with many of the switches being military qualified.
VALUE TO CUSTOMERS
• Switch design allows a remote disconnect of the magnetically
held switch contacts
DIFFERENTIATION
• Sole manufacturing source for magnetically held toggle
switches
Sensing and Productivity Solutions
MICRO SWITCH™ Magnetically Held Toggle Switches, ET Series
Table 1. Specifications
Characteristic
Parameter
Description
Military-grade toggle switch with magnetic “hold” capabilities
Sealed to SAE AS55941 specifications
-65 °C to 71 °C [-85 °F to 160 °F]
Sealing
Operating temperature
Lever actuator styles (metal)
Standard lever, tab lever, pull-to-unlock lever, push-to-unlock lever
2 or 3 positions; maintained or mechanical momentary with electrically maintained (solenoid
energized) feature
Lever/switch action
Mounting
Ø 15/32 in [Ø 0.47 in]
Circuitry
1PDT, 2PDT, 4PST, 4PDT
Termination
Leadwire, solder, screw
Contact material
Electrical rating @ 28 Vdc
Approvals
Fine silver
Up to 7 A (refer to Table 2, Electrical Ratings)
Most catalog listings qualified to SAE AS55941
90,6 mm H (with screw termination) x Ø 25,4 mm [3.57 in H x Ø 1.00 in]; Refer to individual
drawings for above panel and below panel dimensions
Dimensions with standard lever
Table 2. Electrical Ratings (Amps)
Sea Level
65,000 ft
Inductive
2
Supply
Rating Code
Voltage
Resistive
Inductive
Motor
Resistive
Motor
A
B
C
D
28 Vdc
28 Vdc
28 Vdc
28 Vdc
4
4
7
7
2.5
3
4
4
–
–
4
4
4
4
–
–
2.5
2
5
71
1.5
2.51
4
1 50,000 ft for Rating Code D.² AP
TYPICAL ET SWITCH CONSTRUCTION
CIRCUITRY
Single-Pole Double-Throw
Double-Pole Double-Throw
2
2
1
1
3
3
5
4
NC
5
4
6
7
Four-Pole Single-Throw
NC
8
1
2
3
4
5
6
7
8
9
NC
10
11
NC
12
2
sensing.honeywell.com
MICRO SWITCH™ Magnetically Held Toggle Switches, ET Series
PRINCIPLE OF OPERATION
TOGGLE TYPES
Standard — Tapered matte finish stainless steel.
A holding coil in ET toggle switches replaces mechanical holding
mechanisms to maintain the toggle in an operate position. The
toggle is released by breaking the coil circuit.
Pull-to-unlock — Prevents accidental actuation; must be pulled
out to change positions. Stainless steel and nickel-plated brass.
When the hold-in-coil circuit is open, the ET functions as a
momentary contact switch. When the coil is energized (through
remote contacts), the toggle lever will be held (maintained) in the
operate position. De-energizing the coil causes the lever to snap
back to the unoperated position. The lever can also be released
manually (overridden). The solenoid has a hold-in capacity only.
Energizing the coil circuit will not pull the toggle lever into an
operated position from an unoperated position.
Push-to-unlock — Guards against accidental operation. The
toggle must be depressed approximately .100 inch before it can
be moved to either extreme position. Matte-finish stainless steel.
Tab — Paddle-shaped clear anodized aluminum tab.
(1)
(2)
(3)
Two-Position
TERMINAL TYPES
The illustration above shows the operating sequence for an ET
with one SPDT circuit. (1) circuit closed manually; (2) energized
solenoid holds switch circuit closed; and (3) remote contact
breaks solenoid circuit, releases the toggle, and opens the switch
circuit. In ETs with two SPDT circuits, both circuits transfer when
the lever is operated.
Turret — Plated for easy solder connection of up to #14 wire.
Leadwire — No. 20 wire per MIL-W-5086, marked per
MIL-W-5088. Standard length of six feet. Leadwire ends are
stripped. Other material and lengths can be furnished.
Screw – 4-48 UNF x 0.188 (ref.) (long round head screws with
lockwashers). Separated by molded phenolic barriers.
Three-Position
ETs with two SPDT circuits have a magnetic hold-in capability in
both directions from center. When the lever is in the center posi-
tion, the circuitry is as shown in the illustration below. When the
lever is moved to one extreme position, switch (A) circuit is trans-
ferred and switch (B) circuit is unchanged. In the other extreme
position, switch (B) circuit is tranferred while switch (A) circuit is
unchanged.
Sensing and Productivity Solutions
3
MICRO SWITCH™ Magnetically Held Toggle Switches, ET Series
TWO-POSITION ORDER GUIDE
Table 3. Two-Position ET Series
Circuit Made With
Toggle Lever At:
Housing
Height
No. of
Poles/
Basic
Electrical
Rating
Code
Opposite
Keyway
Lever
Type
Military
Number
Keyway*
Termination
Catalog Listing
(Dimen-
sion A)
Switches
mm [in]1
Leadwire
(side exit)
51,6
[2.03]
1
1
1
1
1
1
2
2
2
4
1-3
1-3
1-2
1-2
Standard
Standard
25ET61-6
25ET61-S
25ET61-T
25ET62-6
25ET63-6-F
25ET64-6
26ET61-T
26ET61-T-F
26ET65-T
29ET6-T
M5594/1-1
M5594/1-3
M5594/1-2
M5594/1-4
–
B
B
B
B
B
B
A
A
A
D
61,2
[2.41]
Screw
47,5
[1.87]
1-3
1-2
Standard Solder Turrent
Leadwire
Tab Lever
51,6
[2.03]
1-3
1-2
(side exit)
Pull-to-
unlock
Leadwire
(side exit)
51,6
[2.03]
1-3
1-2
Leadwire
(side exit)
51,6
[2.03]
1-3
1-2
Standard
M5594/1-6
M5594/2-1
–
47,5
[1.87]
1-3, 4-6
1-3, 4-6
1-3, 4-6
1-2, 4-5
1-2, 4-5
1-2, 4-5
None
Standard Solder Turrent
Pull-to-
47,5
[1.87]
Solder Turrent
unlock
47,5
[1.87]
Standard Solder Turrent
Standard Solder Turrent
M5594/2-2
–
1-2, 3-4,
5-6, 7-8
57,2
[2.25]
* Mechanical momentary position, electrically maintained position (solenoid energized).
1 Reference dimensional drawings on page 6.
4
sensing.honeywell.com
MICRO SWITCH™ Magnetically Held Toggle Switches, ET Series
THREE-POSITION ORDER GUIDE
Table 4. Three-Position ET Series
Circuit Made With
Toggle Lever At:
Housing
height
No. of
Poles/
Basic
Electrical
Rating
Code
Opposite
Keyway*
Lever
Type
Military
Number
Keyway*
Center
Termination Catalog Listing
(Dimen-
sion A)
Switches
mm [in]1
Push-to-
unlock
Solder
2
2
2
2
2
1-3, 4-5
1-3, 4-5
1-3, 4-5
1-3, 4-5
1-3, 4-5
1-2, 4-5
1-2, 4-5
1-2, 4-5
1-2, 4-5
1-2, 4-5
1-2, 4-6
1-2, 4-6
1-2, 4-6
1-2, 4-6
1-2, 4-6**
27ET51-T
Turrent
–
C
C
C
C
C
58,0 [2.28]
58,0 [2.28]
58,0 [2.28]
58,0 [2.28]
58,0 [2.28]
Solder
Standard
27ET61-T
Turrent
M5594/3-1
M5594/6-1E
M5594/6-1L
M5594/6-1M
Pull-to-
unlock
Solder
27ET61-T-E
Turrent
Pull-to-
unlock
Solder
27ET61-T-L
Turrent
Pull-to-
unlock
Solder
27ET61-T-M
Turrent
* Mechanical momentary position, electrically maintained position (solenoid energized).
** Mechanical lever lock position.
1 Reference dimensional drawings on page 6.
Sensing and Productivity Solutions
5
MICRO SWITCH™ Magnetically Held Toggle Switches, ET Series
DIMENSIONAL DRAWINGS
Figure 1. Standard Dimensions
6
sensing.honeywell.com
m WARNING
ADDITIONAL MATERIALS
PERSONAL INJURY
The following associated literature is available on the Honeywell
web site at sensing.honeywell.com:
DO NOT USE these products as safety or emergency stop
devices or in any other application where failure of the product
could result in personal injury.
•
•
•
Product line guide
Product range guide
Failure to comply with these instructions could result in
death or serious injury.
Application note: Flight deck toggle switches
m WARNING
MISUSE OF DOCUMENTATION
•
The information presented in this product sheet is for
reference only. Do not use this document as a product
installation guide.
•
Complete installation, operation, and maintenance
information is provided in the instructions supplied with
each product.
Failure to comply with these instructions could result in
death or serious injury.
Warranty/Remedy
Honeywell warrants goods of its manufacture as being free
of defective materials and faulty workmanship. Honeywell’s
standard product warranty applies unless agreed to otherwise by
Honeywell in writing; please refer to your order acknowledgement
or consult your local sales office for specific warranty details. If
warranted goods are returned to Honeywell during the period of
coverage, Honeywell will repair or replace, at its option, without
charge those items it finds defective. The foregoing is buyer’s
sole remedy and is in lieu of all other warranties, expressed
or implied, including those of merchantability and fitness for
a particular purpose. In no event shall Honeywell be liable for
consequential, special, or indirect damages.
Find out more
Honeywell serves its customers
through a worldwide network
of sales offices, representatives
and distributors. For application
assistance, current specifica-
tions, pricing or name of the
nearest Authorized Distributor,
contact your local sales office.
To learn more about Honeywell’s
sensing and control products,
call +1-815-235-6847 or
While we provide application assistance personally, through our
literature and the Honeywell web site, it is up to the customer to
determine the suitability of the product in the application.
Specifications may change without notice. The information we
supply is believed to be accurate and reliable as of this printing.
However, we assume no responsibility for its use.
1-800-537-6945,
visit sensing.honeywell.com,
or e-mail inquiries to
info.sc@honeywell.com
Sensing and Productivity Solutions
Honeywell
1985 Douglas Drive North
Golden Valley, MN 55422
honeywell.com
005433-1-EN IL50 GLO
January 2016
© 2016 Honeywell International Inc. All rights reserved.
相关型号:
25ET122-T
Toggle Switch, SPDT, Latched, 4A, 28VDC, Paddle Lever Actuator, Panel Mount-threaded
HONEYWELL
25ET24-S
Toggle Switch, SPDT, Latched, 4A, 28VDC, Screw Terminal, Lever Actuator, Panel Mount-threaded
HONEYWELL
25ET29-T
Toggle Switch, SPDT, Latched, 4A, 28VDC, Wire Terminal, Lever Actuator, Panel Mount-threaded
HONEYWELL
25ET61-6
Toggle Switch, SPDT, Latched, 4A, 28VDC, Wire Terminal, Lever Actuator, Panel Mount-threaded
HONEYWELL
25ET62-6
Toggle Switch, SPDT, Latched, 4A, 28VDC, Wire Terminal, Lever Actuator, Panel Mount-threaded
HONEYWELL
25ET64-6
Toggle Switch, SPDT, Latched, 4A, 28VDC, Wire Terminal, Lever Actuator, Panel Mount-threaded
HONEYWELL
25ET73-2-F
Toggle Switch, SPDT, Latched, 4A, 28VDC, Wire Terminal, Lever Actuator, Panel Mount-threaded
HONEYWELL
25ET76-6
Toggle Switch, SPDT, On-off, Latched, 4A, 28VDC, Wire Terminal, Lever Actuator, Panel Mount-threaded
HONEYWELL
25ET78-S
Toggle Switch, SPDT, Latched, 4A, 28VDC, Screw Terminal, Lever Actuator, Panel Mount-threaded
HONEYWELL
25ET79-S
Toggle Switch, SPDT, On-off, Latched, 4A, 28VDC, Screw Terminal, Lever Actuator, Panel Mount-threaded
HONEYWELL
©2020 ICPDF网 联系我们和版权申明