2455R [HONEYWELL]
Commercial Switches and Sensors; 商用交换机和传感器型号: | 2455R |
厂家: | Honeywell |
描述: | Commercial Switches and Sensors |
文件: | 总73页 (文件大小:3662K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Commercial
Switches and Sensors
Pressure
Mass Airflow
Force
Humidity
Product solutions on the Interactive Catalogue
Temperature - RTDs
Temperature - Thermistors
Temperature - Probes
Thermostats - Commercial
Thermostats - Precision
Heaters
Combi-sensor
Thermal Cutoffs
Position
Infrared
Current
Liquid Level
Basic Switches
February 2004
INTRODUCTION
COMMERCIAL SWITCHES AND SENSORS
Honeywell’s Commercial Switches and Sensors offer a wide selection of products and technology capability for applications in medical devices and equipment;
heating, ventilation, air-conditioning and refrigeration; information technology; home appliances; motor control and automotive passenger cars. This catalogue
contains a selection of our most popular, established product listings – all tried and tested in field applications. To view our complete range of products, visit our
website at www.honeywell.com/sensing.
How to use this catalogue
System critical sensing solutions
For each referenced listing, key specification parameters, descriptions and
mounting drawing information are presented. These listings illustrate our
capabilities while the specifications included allow easy differentiation between
similar products. For products with no specific reference numbers,
please contact your local Honeywell sales office.
A system is critical if the quality, reliability, delivery and customer service
associated with a component part is essential to the performance of the
operation or end product. If a sensor or switch is critical to the performance,
cost effectiveness, delivery or safety of a product or operation, then it is
system critical. It is therefore a defining element in the performance of the
system under whatever conditions apply. Failure of the component – or failure
of delivery of the component – results in lost productivity, increased costs or a
catastrophic event such as a shutdown. Therefore selecting the right product
is essential. It can make the difference between success and failure.
There are, of course, many more product options available. Full product
specification information may be accessed on our website
(www.honeywell.com/sensing). At the Home page enter the catalogue listing
reference in the SEARCH box and click GO! This will take you directly to the
interactive catalogue/specification search tables for this listing. Alternatively,
select and click the interactive catalogue icon on the Home page and then
choose a product category against which to do a specification search.
Honeywell – delivering excellence
To deliver the right products for our customers’ applications we listen to them
to understand their needs. Using techniques such as “Voice of the Customer”
and “Concept Engineering” we make sure that the products and solutions we
deliver are the right ones. As part of Honeywell we can use local knowledge
and understanding combined with global expertise and resources to achieve
this. We can deploy many key technologies to bring innovative solutions to
customers’ problems.
Also on the website you can access installation instructions, application notes,
Frequently Asked Questions (FAQs), selection guides and additional technical
information.
Mounting dimensions
Our products are manufactured to work well and to last. We use Six Sigma
Plus productivity to ensure this is the case. We have award winning
manufacturing facilities around the world and recognised world class
business excellence in manufacturing and supply chain management to
deliver on time, anywhere in the world.
Mounting dimensions shown in each product section are for reference only.
For exacting layout work, request an engineering drawing from your nearest
Honeywell sales office. Where dual dimensions are shown on mounting
drawings, the first or upper one is millimetres (mm) and the second or lower
is inches (in). Where single dimensions are shown, they are millimetres
(mm), unless otherwise stated.
Our e-business approach offers instant access to product information,
technical support and application knowledge through our Internet site. Check
out our powerful new interactive catalogue that can search and find the right
products for customers’ needs and deliver a drawing ready for incorporation
in a CAD system direct to your desk.
To order these products
Simply contact your local Honeywell Distributor or your local Honeywell office.
More information on Honeywell products and how to contact us can be found
at http://locator.micro.honeywell.com/
And of course, we manage our whole business for the benefit of our
customers, using an acknowledged world-class business excellence approach
that incorporates Six Sigma principles.
2
www.honeywell.com/sensing
CONTENTS
CONTENTS
Pressure Sensors
Page 4 Thermostats - Precision
Page 31
Absolute, differential, gauge, and vacuum gauge pressure sensors for
media that are compatible with a silicon diaphragm. These sensors are
ideal for low-cost commercial grade applications, such as printed circuit
boards. Small and reliable, they offer excellent repeatability and high
accuracy under varying environmental conditions.
Hermetic and non-hermetic thermostats in standard and custom
packages for use in a wide variety of precision applications.
Heaters
Page 37
Wire-wound, chemically-etched, high temperature and transparent
heaters in a variety of sizes and geometries.
Mass Airflow Sensors
Page 10
Amplified and unamplified microbridge mass airflow sensors provide a
sensitive and fast response and high accuracy over a broad range of gas
and air flows.
Combi-sensor
Page 39
Liquid pressure/temperature sensor that uses piezoresistive and
thermistor sensing technology to measure water pressure and
temperature.
Force Sensors
Page 13
Compact, extremely sensitive devices for precise, reliable performance in
any application that requires precision force measurement.
Thermal Cutoffs
Page 40
Dependable organic thermal cutoffs in temperatures ranging from 72 °C
to 240 °C [162 °F to 464 °F]. They are available in various lead lengths
and configurations.
Humidity Sensors
Page 15
Relative humidity sensors with on-chip signal conditioning. Chemically
resistant packaging to accommodate harsh environments. Sensor
construction consists of a planar capacitor with a second polymer layer
to protect against dirt, dust, oils and other hazards.
Position Sensors
Page 42
Hall effect and magnetoresistive sensors for all applications that require
accurate, reliable outputs.
Temperature Sensors - RTDs
Page 16
Infrared Products
Page 46
Platinum and silicon-based thin film resistance temperature devices
(RTDs) for applications that require small package size, accuracy and
linear outputs.
Optoelectronic standard infrared emitting diodes (IREDs), sensors and
assemblies for object presence, limit and motion sensing, position
encoding and movement encoding.
Temperature Sensors - Thermistors
Page 18
Current Sensors
Page 52
Precision Hi-Rel negative temperature coefficient (NTC) thermistors and
positive temperature coefficient (PTC) thermistors for use in a broad
variety of temperature measurement and control applications.
Adjustable linear null balance, digital and linear output current sensors
for monitoring ac or dc current.
Liquid Level Sensors
Page 56
Temperature Sensors - Probes
Page 24
Sensitive sensors in a variety of housing types for detecting the presence
or absence of a wide range of liquids.
A variety of customized probes for use in the automotive and other
industries.
Basic Switches
Page 57
Thermostats - Commercial
Page 27
Standard, miniature and subminiature switches, available in a range of
enclosures and with a variety of actuators. They are ideal for use alone or
built into assemblies.
Dependable bimetal thermostats include choice of automatic or manual
reset, phenolic or ceramic housings, and a variety of mounting brackets
and terminal options.
WARNING
!
MISUSE OF DOCUMENTATION
• The information presented in this product sheet (or
catalogue) is for reference only. DO NOT USE this
document as product installation information.
• Complete installation, operation and maintenance
information is provided in the instructions supplied with
each product.
WARNING
!
PERSONAL INJURY
DO NOT USE these products as safety or emergency stop
devices, or in any other application where failure of the
product could result in personal injury
Failure to comply with these instructions could result in
death or serious injury.
Failure to comply with these instructions could result in
death or serious injury.
3
www.honeywell.com/sensing
PRESSURE
Honeywell pressure sensors are small, low cost and reliable. They feature excellent repeatability,
high accuracy, and reliability under varying environmental conditions. In addition, they feature
highly consistent operating characteristics from one sensor to the next and interchangeability
without recalibration.
Pressure Sensors
We offer three pressure sensor measurement types—absolute, differential and gauge—including
vacuum gauge and bidirectional types. A wide variety of pressure ranges, along with both amplified
and unamplified versions, are available.
Honeywell pressure sensors are best used in applications which require precision pressure
measurement.
Gauge
Flow Through
Type 6
24PC/26PC Series
Signal conditioning:
Unamplified
MOUNTING DIMENSIONS (for reference only) mm/in
noncompensated- (24PC Series)
GAUGE SENSOR
compensated - (26 PC Series)
10 Vdc typ.
1 x 4 Termination (Style 6) Port Style A, Straight
Pin 1 is notched, Pin 2 is next to Pin 1, etc.
Supply voltage:
12 Vdc max. (24PC Series)
16 Vdc max. (26PC Series)
Operating temperature:
-40 °C to 85 °C
-40 °F to 185 °F
Port style:
Termination:
Straight or Flow Through
PCB; 1 x 4; 0.600 in (Type 6)
PCB; 2 x 2; (Type 2)
1 x 4 with connector (Type 5)
OPTIONS
Differential
MOUNTING DIMENSIONS (for reference only) mm/in
DIFFERENTIAL SENSOR
1 X 4 Termination (Style 6) Port Style A, Straight (Only)
24PC Series
24PC Series
MEASUREMENT TYPE
Gauge/Vacuum Gauge
PRESSURE RANGE REFERENCE
1.0 psi
24PCAFA6G
MEASUREMENT TYPE
PRESSURE RANGE REFERENCE
Flow Through/Vacuum Gauge 15.0 psi
24PCCFG6G
Differential/Vacuum Gauge
Gauge/Vacuum Gauge
5.0 psi
5.0 psi
24PCBFA6D
24PCBFA6G
Flow Through/Vacuum Gauge 30.0 psi
24PCDFG6G
Differential/Vacuum Gauge
Gauge/Vacuum Gauge
15.0 psi
15.0 psi
24PCCFA6D
24PCCFA6G
26PC Series
Differential/Vacuum Gauge
Gauge/Vacuum Gauge
30.0 psi
30.0 psi
24PCDFA6D
24PCDFA6G
MEASUREMENT TYPE
Flow Through/Vacuum Gauge 1.0 psi
PRESSURE RANGE REFERENCE
26PCAFG6G
26PCCFG6G
26PCFFG6G
Differential
Gauge
0.5 psi
0.5 psi
24PCEFA6D
24PCEFA6G
Flow Through
15.0 psi
100 psi
Gauge/Vacuum Gauge
Differential
Gauge
100 psi
100 psi
24PCFFA6D
24PCFFA6G
26PC Series
MEASUREMENT TYPE
Differential/Vacuum Gauge
Gauge/Vacuum Gauge
PRESSURE RANGE REFERENCE
1.0 psi
1.0 psi
26PCAFA6D
26PCAFA6G
Differential
Gauge
5.0 psi
5.0 psi
26PCBFA6D
26PCBFA6G
Differential/Vacuum Gauge
Gauge/Vacuum Gauge
15.0 psi
15.0 psi
26PCCFA6D
26PCCFA6G
Differential
Gauge
30.0 psi
30.0 psi
26PCDFA6D
26PCDFA6G
Gauge
100 psi
250 psi
26PCFFA6G
26PCGFA6D
Differential
4
www.honeywell.com/sensing
PRESSURE
24PC/26PC Series
(Continued)
24PC/26PC SMT
(Surface Mount Technology) Low Pressure
CPC/CPX Series
Signal conditioning:
Unamplified
Signal conditioning:
Unamplified
compensated - (CPC Series)
Type 2
noncompensated- (24PC SMT Series)
compensated - (26 PC SMT Series)
noncompensated - (CPX Series)
12 Vdc typ.
Supply voltage:
10 Vdc typ.
12 Vdc max. (24PC SMT Series)
16 Vdc max. (26PC SMT Series)
Supply voltage:
16 Vdc max.
Operating temperature:
-25 °C to 85 °C
-13 °F to 185 °F
Barbed
Operating temperature:
-40 °C to 85 °C
-40 °F to 185 °F
Port style:
Port style:
Termination:
Straight, 1,88 mm Ø (0.74 in)
SMT solder
Termination:
Accuracy grade:
PCB
Commercial (1.0 %)
Measurement type:
Gauge, Vacuum Gauge,
Differential, Wet/Wet Differential
OPTIONS
26PC Series
CPC Series
MEASUREMENT TYPE
Flow Through
PRESSURE RANGE REFERENCE
30.0 psi 26PCDFG2G
MEASUREMENT TYPE
Differential
Gauge
PRESSURE RANGE
REFERENCE
CPCL04DFC
CPCL04GFC
(1.0 psi) 4.0 in H O
2
Type 5
(1.0 psi) 4.0 in H O
2
Differential
(1.0 psi) 10.0 in H O CPCL10DFC
2
CPX Series
OPTIONS
MEASUREMENT TYPE
PRESSURE RANGE
REFERENCE
Differential
4.0 in H O
CPXL04DF
24PC SMT Series
2
Differential
10.0 in H O
CPCL10DF
PRESSURE RANGE
REFERENCE
2
0 psi to 1.0 psi
24PC01SMT
0 psi to 5.0 psi
0 psi to 15.0 psi
24PC05SMT
24PC15SMT
26PC SMT Series
PRESSURE RANGE
REFERENCE
0 psi to 1.0 psi
26PC01SMT
26PC Series
0 psi to 5.0 psi
0 psi to 15.0 psi
26PC05SMT
26PC15SMT
MEASUREMENT TYPE
Flow Through/Vacuum Gauge 100 psi
PRESSURE RANGE REFERENCE
26PCFFU5G
5
www.honeywell.com/sensing
PRESSURE
DC Series, Low Pressure
DCXL/DUXL Series, Low Pressure
Signal conditioning:
Amplified compensated
unregulated (DC001NDC4)
regulated (DC005NDR4)
Signal conditioning:
Unamplified
compensated (DCXL)
noncompensated (DUXL)
12 Vdc typ., 16 Vdc max. (DCXL)
4.5 Vdc min., 8 Vdc max. (DUXL)
-25 °C to 85 °C
Supply voltage:
5 Vdc typ., 5.1 Vdc max. (DC001NDC4)
Supply voltage:
7 Vdc to 35 Vdc (DC005NDR4)
-25 °C to 85 °C
-13 °F to 185 °F
Barbed
Operating temperature:
Operating temperature:
-13 °F to 185 °F
Port style:
Port style:
Barbed
Termination:
PCB
Termination:
PCB
OPTIONS
OPTIONS
DC001NDC4
DCXL Series
MEASUREMENT TYPE
Differential
Differential
PRESSURE RANGE
REFERENCE
DCXL01DN
DCXL10DN
1.0 in H O
MEASUREMENT TYPE
Differential
PRESSURE RANGE
REFERENCE
DC001NDC4
2
10.0 in H O
1.0 in H O
2
2
DUXL Series
DC005NDR4
MEASUREMENT TYPE
PRESSURE RANGE
REFERENCE
Differential
5.0 in H O
DC005NDR4
2
MEASUREMENT TYPE
Differential
Differential
PRESSURE RANGE
REFERENCE
DUXL01D
DUXL10D
1.0 in H O
2
10.0 in H O
2
6
www.honeywell.com/sensing
PRESSURE
XCA Series
XPC Series
Signal conditioning:
Supply voltage:
Operating temperature:
Amplified compensated
5 Vdc typ., 16 Vdc max.
-25 °C to 85 °C
-13 °F to 185 °F
Barbed
Signal conditioning:
Supply voltage:
Operating temperature:
Unamplified compensated
12 Vdc typ., 16 Vdc max.
-25 °C to 85 °C
-13 °F to 185 °F
Barbed
Port style:
Port style:
Termination:
PCB
Termination:
Accuracy grade:
PCB
Commercial (1.0 %)
MEASUREMENT TYPE
PRESSURE RANGE
REFERENCE
Absolute
15.0 psia
XCA415AN
XCX Series
Signal conditioning:
Supply voltage:
Operating temperature:
Unamplified compensated
12 Vdc typ., 16 Vdc max.
-25 °C to 85 °C
-13 °F to 185 °F
Barbed
Port style:
Termination:
Accuracy grade:
PCB
MEASUREMENT TYPE
Differential
Differential
PRESSURE RANGE
1.0 psi
15.0 psi
PORT STYLE
Axial
Radial
REFERENCE
XPC01DFC
XPC15DTC
Commercial (1.0 %)
XSX Series, Low pressure
Signal conditioning:
Supply voltage:
Unamplified uncompensated
12 Vdc typ., 16 Vdc max.
Operating temperature:
Port style:
Termination:
-25 °C to 85 °C [-13 °F to 185 °F]
Button
PCB
Accuracy grade:
Commercial (1.0 %)
MEASUREMENT
TYPE
Differential
Differential
Differential
PRESSURE
ACCURACY
GRADE
REFERENCE
RANGE
1.0 psi
1.0 psi
15.0 psi
XCX01DNC
XCX01DNH
XCX15DNC
High (0.50 %)
MEASUREMENT TYPE
Gauge
PRESSURE RANGE
4.0 in H O
REFERENCE
XSXL04GF
2
7
www.honeywell.com/sensing
PRESSURE
ASDX Series
Signal conditioning:
Supply voltage:
Operating temperature:
Port style:
40PC Series, Miniature Signal
Conditioned
Signal conditioning:
Supply voltage:
Amplified compensated
4.75 Vdc to 5.25 Vdc
-20 °C to 105 °C [-4 °F to 221 °F]
Taper 2,29 mm [0.090 in]
PCB
Amplified
5 Vdc ± 0.25 Vdc
-45 °C to 125 °C
-49 °F to 257 °F
Operating temperature:
Termination:
Accuracy grade:
±2.0 %
Port style:
Termination:
Straight for O-ring interface
PCB, unformed
A2 Package
MEASUREMENT TYPE
Absolute
Absolute
PRESSURE RANGE
REFERENCE
0 psi to 15 psi
0 psi to 30 psi
0 psi to 100 psi
ASDX015A24R
ASDX030A24R
ASDX100A24R
Absolute
D4 Package
MEASUREMENT TYPE
Bi-Directional Gauge/Vacuum Gauge
PRESSURE RANGE
± 50 MM HG
0 to 300 mm HG
0 to -15.0 psi
15.0 psi
30.0 psi
100 psi
150 psi
250 psi
REFERENCE
40PC001B1A
40PC006G1A
40PC015V1A
40PC015G1A
40PC030G1A
40PC100G1A
40PC150G1A
40PC250G1A
40PC500G1A
Gauge
Vacuum
Gauge
Gauge
Gauge
Gauge
Gauge
Gauge
500 psi
MEASUREMENT TYPE
Differential/gauge
Differential/gauge
Differential/gauge
Differential/gauge
Differential/gauge
PRESSURE RANGE
0 psi to 1 psi
0 psi to 5 psi
0 psi to 15 psi
0 psi to 30 psi
0 psi to 100 psi
REFERENCE
ASDX001D44R
ASDX005D44R
ASDX015D44R
ASDX030D44R
ASDX100D44R
G2 Package
MEASUREMENT TYPE
Guage
Guage
Guage
Guage
PRESSURE RANGE
0 psi to 1 psi
0 psi to 5 psi
0 psi to 15 psi
0 psi to 30 psi
0 psi to 100 psi
REFERENCE
ASDX001G24R
ASDX005G24R
ASDX015G24R
ASDX030G24R
ASDX100G24R
Guage
8
www.honeywell.com/sensing
PRESSURE
140PC Series
160PC Series, Low Pressure
Signal conditioning:
Supply voltage:
Operating temperature:
Amplified
8 Vdc typ., 16 Vdc max.
-40 °C to 85 °C
-40 °F to 185 °F
Straight
Signal conditioning:
Supply voltage:
Operating temperature:
Amplified
8 Vdc typ., 16 Vdc max.
-40 °C to 85 °C
-40 °F to 185 °F
Straight
Port style:
Port style:
Termination:
PCB
Termination:
PCB
Note: Dimensions shown apply to Differential and Absolute versions.
Note: Dimensions shown apply to Differential and Absolute versions.
Gauge units are identical, except the P1 port is absent.
Gauge units are identical, except the P1 port is absent.
MEASUREMENT
TYPE
Gauge/Vacuum Gauge
PRESSURE
RANGE
-15 psi
TERMINATION
REFERENCE
MEASUREMENT
TYPE
Differential/Vacuum Gauge 0 to 27.68 in H O
PRESSURE
RANGE
SUPPLY
VOLTAGE
REFERENCE
162PC01D
141PC15G
2
Differential/Vacuum Gauge 1.0 psi
142PC01D
142PC01G
Differential/Vacuum Gauge ± 5.0 in H O
163PC01D36
2
Gauge
1.0 psi
Differential/Vacuum Gauge -20 cm to 120 cm H O
163PC01D48
163PC01D61
2
Gauge
2.0 psi
142PC02G
Differential/Vacuum Gauge -20 cm to 120 cm H O
5 Vdc
2
Differential/Vacuum Gauge 5.0 psi
Differential/Vacuum Gauge -39 in H O to 55 in H O
142PC05D
142PC05D97
142PC05G
Differential/Vacuum Gauge ± 2,5 in H O
163PC01D75
164PC01D37
164PC01D76
2
2
2
Gauge
5.0 psi
Differential/Vacuum Gauge 10.0 in H O
2
Absolute
Absolute
Gauge
15 psia
15 psia
15 psi
142PC15A
142PC15AW95
142PC15G
Differential/Vacuum Gauge 5,0 in H O
2
Leadwire
Leadwire
Differential/Vacuum Gauge ± 2.5 psi
Differential/Vacuum Gauge ± 5.0 psi
143PC03D
143PC05DW
9
www.honeywell.com/sensing
MASS AIRFLOW
Mass Airflow sensors contain a thin-film, thermally isolated bridge structure containing heater and
temperature sensing elements. The bridge structure provides a sensitive and fast response to the flow of
air or other gas over the chip.
Mass Airflow
Sensors
State-of-the-art chip design and manufacturing techniques allow the microbridge to be remarkably
sensitive, fast, small. Used wherever airflow needs to be measured.
Supply voltage:
Operating temperature:
Media compatibility:
8 Vdc to 15 Vdc
-25 °C to 85 °C (-13 °F to 185 °F)
Dry gas only
AWM2000 Series
AWM3000 Series
AWM40000 Series
The AWM2000 Series microbridge mass airflow
sensor is a passive device comprised of two
Wheatstone bridges and has bidirectional sensing
capability. The heater control circuit is required for
operation per specifications. The sensing bridge
supply circuit is also required for operation per
specifications. These two circuits are not on board
the package and must be supplied in the
application. The differential amplifier is a useful
interface for the sensing bridge. It can be used to
introduce gain and to voltage offsets to the sensor
output.
Like the AWM2000 Series, the dual Wheatstone
bridges control airflow measurement. The
AWM3000 Series is amplified; therefore, it can be
used to increase the gain and to introduce voltage
offsets to the sensor output. The heater control
circuit and the sensing bridge supply circuit are on
board the package.
The microbridge mass airflow sensor operates
on the theory of heat transfer. Mass airflow is
directed across the surface of the sensing
elements. Output voltage varies in proportion
to the mass air or other gas flow through the
inlet and outlet ports of the package. The
specially designed housing precisely directs
and controls the airflow across the
Signal conditioning:
Am-
plified (1 Vdc to 5 Vdc)
Straight
microstructure sensing element. Mechanical
design of the package allows it to be easily
mounted to printed circuit boards.
Port style:
The microbridge mass airflow sensor has a
unique silicon chip based on advanced
microstructure technology. It consists of a
thin-film, thermally isolated bridge structure
containing heater and temperature sensing
elements. The bridge structure provides a
sensitive and fast response to the flow of air or
other gas over the chip. Dual sensing elements
positioned on both sides of a central heating
element indicate flow direction as well as flow
rate. Laser trimmed thick film and thin film
resistors provide consistent interchangeability
from one device to the next.
Signal conditioning: Unamplified (-44,5 mVdc to
44,5 mVdc)
Port style:
Sensor resistance:
Straight
5 kOhm
Port style:
Manifold
FLOW/PRESSURE RANGE
± 200 sccm
REFERENCE
AWM3100V
AWM3200V
AWM3300V
+ 2.0 in H 0 (5 mBar)
2
± 1000 sccm (1 SLPM)
FLOW/PRESSURE RANGE
± 200 sccm
REFERENCE
AWM2100V
AWM2200V
AWM2300V
± 4.0 in H O (10 mBar)
2
± 1000 sccm (1 SLPM)
SIGNAL
FLOW/
REFERENCE
CONDITIONING
PRESSURE RANGE
Unamplified (8.5 mV) ± 25 sccm
AWM42150VH
Unamplified (54.7 mV) ± 1000 sccm (1 SLPM) AWM42300V
Amplified
(1 Vdc to 5 Vdc)
Amplified
± 1000 sccm (1 SLPM) AWM43300V
+ 6 SLPM AWM43600V
(1 Vdc to 5 Vdc)
10
www.honeywell.com/sensing
MASS AIRFLOW
AWM5000 Series - High flow
AWM5000 Series Microbridge Mass Airflow Sensors feature a Venturi type flow housing. They
measure flow as high as 20 standard liters per minute (SLPM) while inducing a maximum pressure
drop of 2.25 inches H O. The microbridge chip is in direct contact with the flow stream, greatly
2
reducing error possibilities due to orifice or bypass channel clogging.
The rugged plastic package has been designed to withstand common mode pressures up to 50
psi, and the small sensing element allows 100 g of shock without compromising performance. The
included “AMP” compatible connector provides reliable connection in demanding applications.
Each AWM5000 sensor contains circuitry which performs amplification, linearization, temperature
compensation, and gas calibration. A 1 to 5 Vdc linear output is possible for all listings regardless of flow
range (5, 10, 15, or 20 SLPM) or calibration gas (nitrogen, carbon dioxide, nitrous oxide, or argon). All
calibration is performed by active laser.
Signal conditioning:
Port style:
Amplified (1 Vdc to 5 Vdc)
Threaded, ¼¨ NPT
FLOW/PRESSURE RANGE
REFERENCE
0 SLPM to 5 SLPM (N calibration)
AWM5101VN
AWM5102VN
AWM5104VC
AWM5104VN
2
0 SLPM TO 10 SLPM (N calibration)
2
0 SLPM to 20 SLPM (CO calibration)
2
0 SLPM to 20 SLPM (N calibration)
2
AWM700 Series
AWM700 Series microbridge mass airflow sensors provide in-line flow measurement with a specially
designed bypass flow housing. The sensors measure flow as high as 200 standard liters per minute
(SLPM) while inducing a pressure drop of 1 inch H O, typically. The AWM700 has a high flow range
2
capability in a small package.
Signal conditioning:
Port style:
Amplified (1 Vdc to 5 Vdc)
Tapered, 22 mm
CAUTION
PRODUCT DAMAGE
AWM Series Microbridge Mass Airflow
Sensors are not designed to sense
liquid flow and will be damaged by
liquid flow through the sensor.
Failure to comply with these
instructions could result in product
FLOW/PRESSURE RANGE
+ 200 SLPM
REFERENCE
AWM720P1
11
www.honeywell.com/sensing
MASS AIRFLOW
AWM90000 Series
NOTICE
The AWM90000 Series microbridge mass airflow sensors are available in
two versions, mass flow and differential pressure. The AWM92100V has
a flow range of ±200 sccm with a pressure drop of only 0.49 mBar,
typically. The AWM92200V is a differential pressure version that has a
LAMINAR FLOW
Due to the fast response time of the sensor, these
specifications were generated using laminar flow. Airflow
instability or “turbulence” present in the airstream will
result in an increase in measurement uncertainty.
range of ±2 in H O.
2
The AWM90000 Series has a 1 ms response time, operates with a
supply voltage from 8.0 Vdc to 15.0 Vdc, while consuming only 50 mW
of power. The compact plastic package will withstand a maximum
overpressure of 25 psi without compromising performance.
The turbulent flow problem can be corrected by either
straightening the airflow using flow laminarizing or by
slowing the response of the sensor using a simple RC
time constant on the output of the sensor. This, of course,
slows down the sensor response time. The values needed
depend on the amount of turbulence present in the
application.
Signal Conditioning:
Port Style:
Unamplified
Straight
Several techniques for laminarizing the flow include
adding hex shaped honeycombs, foam, screen materials
or adding constrictors (frits) to the flow stream. There are
various commercial laminar flow elements that can be
purchased. Unfortunately the greater the efficiency of the
laminarizer, the greater the increase in pressure drop in
order to establish a given flow rate. Plastic honeycomb
material probably gives the most improvement for the
least pressure drop. In any test fixture, the avoidance of
sharp radii is an absolute requirement.
FLOW RANGE (FULL SCALE)
±200 sccm
—
PRESSURE RANGE
—
REFERENCE
AWM92100V
AWM92200V
±2.0 H O (5 mBar)
2
CAUTION
PRODUCT DAMAGE
AWM Series Microbridge Mass Airflow
Sensors are not designed to sense
liquid flow and will be damaged by
liquid flow through the sensor.
Failure to comply with these
instructions could result in product
12
www.honeywell.com/sensing
FORCE
FORCE
Force sensors operate on the principle that the resistance of silicon implanted piezoresistors will increase when
the resistors flex under any applied force. The sensor concentrates force from the application, through the
stainless steel plunger, directly to the silicon sensing element. The amount of resistance changes in proportion
to the amount of force being applied. This change in circuit resistance results in a corresponding mV output
level.
Force Sensors
FSG Series
FSL Series
Plunger actuator - Force range 1500 g
Ball bearing actuator - Force range 500 g
Supply voltage:
360 mV span @ 10 Vdc
Supply voltage:
60 mV span @ 5 Vdc
Operating temperature:
-40 °C to 85 °C
-40 °F to 185 °F
Operating temperature:
-40 °C to 85 °C
-40 °F to 185 °F
Sensitivity:
Overforce:
0.20 mV/g min., 0.24 mV/g typ., 0.28 mV/g max.
5500 g
Sensitivity:
Overforce:
0.10 mV/g min., 0.12 mV/g typ., 0.14 mV/g max.
4500 g
REFERENCE
REFERENCE
Non-compensated
FSG15N1A
Non-compensated
FSL05N2C
13
www.honeywell.com/sensing
FORCE
Model 1865 Force/Pressure Transducer
The Model 1865 is a high-performance transducer specifically designed
to address the needs of medical and specialized OEM applications.
Offering laser-trimmed compensation, the Model 1865 may be specified
to operate with either a constant current or voltage supply.
The Model 1865 employs a solid state piezoresistive pressure
transducer mounted in a plastic package. For applications where force is
applied by a flexible membrane to the sensor, such as found in infusion
pumps, the Model 1865’s precision height silicone diaphragm provides
long life and is a reliable replacement for older force or load cell
transducers. Utilizing a silicon rubber diaphragm, the 1865 is compatible
with some liquid media applications. The Model 1865 may be operated
in either current or voltage excitation, and its output may be amplified or
signal conditioned, as required. The semiconductor-based sensor offers
high resolution using its Wheatstone Bridge strain gauge design. The
height of the unit’s patented, poured-in-place silicon rubber diaphragm
is controlled to ensure sensitivity to low pressure. This diaphragm is
bonded to a plastic header and transmits force applied through a special
silicone gel to the diaphragm of a silicon peizoresistive die. The back of
the die is exposed to atmospheric pressure, which results in a gauge
pressure output.
Pressure over-range protection: 3X span or 60 psi, whichever is least
Media/materials compatibility
Top side:
Room atmosphere, directly applied force, and liquids
compatible with dimethyl silicon, polyetherimide (Ultem)
Non-corrosive dry gasses and fluids compatible with
silicon, pyrex, RTV silicone, and ceramic
Gauge pressure
Bottom side:
Sensor:
Diaphragm:
Compensation:
Dimethyl silicone
Laser trimmed normalised output
OPTIONS
Excitation 1.5 mA
PRESSURE
REFERENCE
0 psi to 5 psi
0 psi to 10 psi
0 psi to 15 psi
0 psi to 25 psi
0 psi to 30 psi
1865-01G-L-N
1865-02G-L-N
1865-03G-L-N
1865-04G-L-N
1865-05G-L-N
Excitation 10 Vdc
PRESSURE
REFERENCE
0 psi to 5 psi
0 psi to 10 psi
0 psi to 15 psi
0 psi to 25 psi
0 psi to 30 psi
1865-01G-K-N
1865-02G-K-N
1865-03G-K-N
1865-04G-K-N
1865-05G-K-N
14
www.honeywell.com/sensing
HUMIDITY
Relative Humidity/Temperature and Relative Humidity sensors are configured with integrated circuitry to provide
on-chip signal conditioning. These sensors contain a capacitive sensing die set in thermoset polymers that
interacts with platinum electrodes. The laser trimmed sensors have an interchangeability of + 5%RH, with stable,
low drift performance.
Humidity
Sensors
Absorption based humidity sensors provide both temperature and %RH (Relative Humidity) outputs. On-chip signal
processing ensures linear voltage output versus %RH. Sensor laser trimming offers + 5%RH accuracy, and achieves
2%RH accuracy with calibration. Packages are chemically resistant and operate in ranges of -40 °C to 85 °C (-40 °F to
185 °F) to accommodate harsh environments.
Supply voltage:
Operating humidity range:
Operating temperature range:
4.0 Vdc to 5.8 Vdc
0 to 100% RH, non-condensing
-40 °C to 85 °C (-40 °F to 185 °F)
HIH Series
OPTIONS
HIH-3610 Monolithic integrated circuit
HIH-3602 Monolithic integrated circuit
HIH-3602-A and HIH-3602-C Relative Humidity (RH) sensors combine both
relative humidity and temperature sensing in a TO-5 housing with a
hydrophobic sintered stainless steel filter.
The HIH-3610 humidity sensor is designed specifically for high volume OEM
(Original Equipment Manufacturer) users. Direct input to a controller or other
device is made possible by this sensor’s linear voltage output. With a typical
current draw of only 200 µA, the HIH-3610 is ideally suited for low drain,
battery powered systems. Tight sensor interchangeability reduces or
eliminates OEM production calibration costs. Individual sensor calibration data
is available.
The temperature sensor is thermally connected with the RH sensor making the
HIH-3602-A/C ideal for measuring dew point and other absolute moisture
terms.
Package style:
Termination:
TO-5 can
0,46 mm (0.18 in)
The HIH-3610 delivers instrumentation quality RH sensing performance in a
low cost, solderable SIP (Single In-line Package). Available in two lead spacing
configurations, the RH sensor is a laser trimmed thermoset polymer capacitive
sensing element with on-chip integrated signal conditioning.
Nist Certification:
NIST Calibration sensor-specific printout
Package style:
Solderable SIP
4,27
(0.168)
4,27
(0.168)
2,03
(0.080)
9,47
(0.373)
9,47
(0.373)
1,90
(0.075)
12,19 MIN
(0.480)
12,70 MIN
(0.50)
TEMPERATURE SENSOR
100 kOhm ± 5 % @ 25 °C, NTC 0-50 C
1000 Ohm ± 0.2 % @ 0 °C, platinum RTD
REFERENCE
HIH-3602-A
HIH-3602-C
-
+
OUT
-
3X 0,38
(0.015)
+
OUT
2,54
(0.100)
3X 0,38
(0.015)
5,08
(0.200)
1,27
(0.050)
2,54
(0.100)
HIH-3602-L Integrated circuit
The HIH-3602-L Relative Humidity (RH) sensor delivers instrumentation
quality RH sensing performance in a rugged, low cost, slotted TO-39 housing.
On-board signal conditioning reduces product development times while a
typical current draw of only 200 µA makes the HIH-3602-L perfect for
battery powered systems. This sensor should be shielded from bright
light.
TERMINATION
NIST CERTIFICATION
None
None
NIST Calibration sensor-specific printout HIH-3610-003
NIST Calibration sensor-specific printout HIH-3610-004
REFERENCE
HIH-3610-001
HIH-3610-002
2,54 mm (0.100 in) Lead Pitch
1,27 mm (0.050 in) Lead Pitch
2,54 mm (0.100 in) Lead Pitch
1,27 mm (0.050 in) Lead Pitch
Package style:
Termination:
T0-39 can
0,46 mm (0.18 in)
None
Nist Certification:
CAUTION
PRODUCT DAMAGE
The inherent design of this component causes it to be
sensitive to the electrostatic discharge (ESD). To prevent
ESD-induced damage and/or degradation, take normal ESD
precautions when handling this product.
Failure to comply with these instructions could result in
product damage
REFERENCE
HIH-3602-L
15
www.honeywell.com/sensing
TEMPERATURE - RTDS
Honeywell’s thin film RTD (Resistance Temperature Detector) temperature sensors feature two distinct series.
These sensors are laser trimmed for accuracy and interchangeability. Linear outputs are stable and fast.
Temperature
Sensors -
RTDs
The TD Series Temperature Sensors are silicon-based RTDs. They offer 2000 Ohm nominal resistance at 20 °C.
Temperature range of -40 °C to 150 °C.
The HEL Series Temperature Sensors are platinum RTDs, offering 100 Ohm or 1000 Ohm versions and temperature
ranges of -200 °C to 540 °C.
HEL-700 Series
100/1000 Ohm platinum RTD
Supply voltage:
Base resistance
and interchangeability:
4 Vdc to 9 Vdc
1000 ± 2 Ohm (± 0.2 %) @ 0 °C (Standard)
1000 ± 1 Ohm (± 0.1 %) @ 0 °C (Optional)
100 Ohm
(0.00385 Ohm/Ohm/°C DIN standard)
PACKAGING STYLE
Type A
Type A
BASE RESISTANCE AND INTERCHANGEABILITY
Standard
Optional
REFERENCE
HEL-700-T-0-A
HEL-700-T-1-A
OPTIONS
HEL-700
Temperature range:
Type B
Type B
Standard
Optional
HEL-700-T-0-B
HEL-700-T-1-B
-200 °C to 540 °C
-300 °F to 1000 °F
Packaging style/Termination:
Radial chip/ribbon leads (Type A)
Radial chip/no leads (Type B)
SMT (Axial) flip chip/no leads (Type C)
1000 Ohm
(0.00375 Ohm/Ohm/°C)
PACKAGING STYLE
Type A
Type A
BASE RESISTANCE AND INTERCHANGEABILITY
Standard
Optional
REFERENCE
HEL-700-U-0-A
HEL-700-U-1-A
Type A
Type B
Type B
Standard
Optional
HEL-700-U-0-B
HEL-700-U-1-B
Type C
Type C
Standard
Optional
HEL-700-U-0-C
HEL-700-U-1-C
Type B
Centre lead
not connected
Type C
CAUTION
PRODUCT DAMAGE
The inherent design of this component causes it to be
sensitive to the electrostatic discharge (ESD). To prevent
ESD-induced damage and/or degradation, take normal ESD
precautions when handling this product.
Failure to comply with these instructions could result in
product damage
16
www.honeywell.com/sensing
TEMPERATURE- RTDS
HEL-700 Series
TD Series
100/1000 Ohm platinum RTD (Continued)
2000 Ohm silicon RTD
Supply voltage:
Temperature range:
10 Vdc
-40 °C to 150 °C
-40 °F to 302 °F
HEL-705/707/711/712/716/717
Temperature range:
HEL-705/711/716
-200 °C to 260 °C
-320 °F to 500 °F
-75 °C to 540 °C
-100 °F to 1000 °F
Ceramic case
HEL-707/712/717
OPTIONS
Packaging style:
Termination:
NIST calibration:
TD4A Liquid temperature sensor
12 in leadwires
None
PACKAGING STYLE
TERMINATION
REFERENCE
Threaded aluminium case
Leadwires
TD4A
TD5A Subminiature temperature sensor
100 Ohm
(0.00385 Ohm/Ohm/°C DIN standard)
BASE RESISTANCE AND INTERCHANGEABILITY
REFERENCE
Standard
Optional
HEL-705-T-0-12-00
HEL-705-T-1-12-00
Standard
Optional
HEL-707-T-0-12-00
HEL-707-T-1-12-00
Standard
Optional
HEL-711-T-0-12-00
HEL-711-T-1-12-00
Standard
Optional
HEL-712-T-0-12-00
HEL-712-T-1-12-00
PACKAGING STYLE
TERMINATION
REFERENCE
Plastic case
SIP
TD5A
Standard
Optional
HEL-716-T-0-12-00
HEL-716-T-1-12-00
Standard
Optional
HEL-717-T-0-12-00
HEL-717-T-1-12-00
1000 Ohm
(0.00375 Ohm/Ohm/°C)
BASE RESISTANCE
AND INTERCHANGEABILITY
Standard
NIST CALIBRATION
REFERENCE
HEL-705-U-0-12-00
HEL-705-U-1-12-00
Optional
Standard
Optional
HEL-707-U-0-12-00
HEL-707-U-1-12-00
Standard
Optional
HEL-711-U-0-12-00
HEL-711-U-1-12-00
Standard
Optional
HEL-712-U-0-12-00
HEL-712-U-1-12-00
Standard
Optional
Optional
HEL-716-U-0-12-00
HEL-716-U-1-12-00
HEL-716-U-1-12-C2
NIST @ 0 and 100 °C
Standard
Optional
HEL-717-U-0-12-00
HEL-717-U-1-12-00
17
www.honeywell.com/sensing
TEMPERATURE - THERMISTORS
TEMPERATURE - THERMISTORS
Temperature Sensors -
Thermistors
Thermistors change resistance with a change in temperature. They do
not amplify, rectify, polarize or generate a signal. The thermistor
temperature may be changed by the surrounding temperature or by
self-heating the thermistor by passing a current through it.
Most applications such as temperature measurement and control or
copper coil compensation require that the power dispersed in a
thermistor be kept to a minimum so as not to perceptibly self-heat the
thermistor. Other applications depend entirely on the self-heating effect.
When the surrounding temperature is fixed, the resistance of a thermistor
is largely a function of power being dispersed within it, raising its
temperature above its environment. Under these operating conditions,
the temperature may rise 100 °C to 200 °C [121 °F to 392 °F] and the
resistance may be lowered to 1/1000th of its original value at low current.
This self-heating characteristic provides a whole field of uses for the
thermistor. In the self-heat state it is thermally sensitive (its resistance will
be changed) to any condition, changing the rate at which heat is
conducted away from it. If the rate of heat removal is ideally fixed, then
the thermistor is sensitive to power input and suited for use in voltage or
power level control applications.
Glass Encapsulated Chip (GEC)
Thermistors
OPTIONS
At 25 °C [77 °F]
The GECs are high-quality, hermetically-sealed, glass-encapsulated chip
thermistors in an axial lead package. They cover the full temperature
range of -60 °C to 300 °C [-76 °F to 572 °F]. These rugged sensors are
designed for applications which demand reliability at low cost. The
uniform dimensions are ideally suited for automated assembly.
OHM
1,000
2,000
3,000
5,000
% TOLERANCE
R/T CURVE
REFERENCE
10
10
10
5
10
5
10
5
10
10
5
10
5
10
10
10
10
10A
10
10
10
10
10
16
16
16
16
16
16
16
16
1
135-102DAG-J01
135-202FAG-J01
135-302FAG-J01
135-502FAF-J01
135-502FAG-J01
135-103FAF-J01
135-103FAG-J01
135-103LAF-J01
135-203LAG-J01
135-303KAG-J01
135-503LAF-J01
135-503LAG-J01
135-104LAF-J01
135-104LAG-J01
135-204QAG-J01
135-504QAG-J01
135-105QAG-J01
5,000
10,000
10,000
10,000
20,000
30,000
50,000
50,000
100,000
100,000
200,000
500,000
1 M
Operating temperature:
Encapsulation:
-60 °C to 300 °C [-76 °F to 572 °F]
DO-35 glass
Lead material:
Dissipation constant (DC):
Time constant (TC):
Tinned copper-clad steel
2.5 mW/°C in still air min.
4 s in still air max.
Resistance range at 25 °C [77 °F]:
1 kOhm to 1 MOhm
1
1
CHIP
Interchangeable R/T curve matched
±1 °C from 0 °C to 100 °C [32 °F to 212 °F]
THERMISTOR
2,0 DIA.
[0.08]
GLASS
ENCAPSULATION
28,6
[1.125]
OHM
10,000
20,000
30,000
50,000
100,000
R/T CURVE
REFERENCE
16
16
16
16
16
135-103LFW-J01
135-203LFW-J01
135-303LFW-J01
135-503LFW-J01
135-104LFW-J01
4,6
[0.81]
0,51 DIA. TINNED COPPER CLAD STEEL
[0.020]
18
www.honeywell.com/sensing
TEMPERATURE - THERMISTORS
TEMPERATURE - THERMISTORS
Uncoated chip
Epoxy-coated or Uncoated Chip
Thermistors
0,76 MAX
[0.030]
Epoxy-coated or Uncoated Chip thermistors are available in a broad
range of custom resistance values and R/T curves. They are also
available in two lead types:
• Uninsulated: 0,2032 mm [0.008 in] diameter, tinned copper for
1 kOhm or less, and tinned copper alloy for greater than 1 kOhm.
1,40 ±0,51
[0.055 ±0.020]
1,40 ±0,51
[0.055 ±0.020]
• Insulated: 0,254 mm [0.010 in] diameter, nickel wire, Teflon-insulated,
38,1 mm [1.5 in] long and furnished with 6,35 mm [0.25 in] stripped
ends of 0,4064 mm [0.016 in] and 0,508 mm [0.020 in] tin-plated
copper leads.
10 % Tolerance at 25 °C [77 °F], uninsulated leads
OHM
100
R/T CURVE
REFERENCE
17
17
10A
10A
16
16
16
16
16
18
1
195-101CAG-A01
195-301CAG-A01
195-501DAG-A01
195-102DAG-A01
195-202LAG-A01
195-302LAG-A01
195-502LAG-A01
195-103LAG-A01
195-203LAG-A01
195-303KAG-A01
195-503QAG-A01
195-104QAG-A01
300
500
Operating temperature range: -40 °C to 125 °C* [-40 °F to 257 °F]*
1,000
2,000
3,000
5,000
10,000
20,000
30,000
50,000
100,000
Encapsulation:
Lead material:
Epoxy-coated or uncoated
• Uninsulated: tinned copper/copper alloy
• Insulated: tinned copper/copper alloy
with nickel wire Teflon
Dissipation constant (DC):
Time constant (TC):
0.75 mW/°C in still air min.
15 s in still air max.
1
Resistance range at 25 °C [77 °F]:
100 Ohm to 100 kOhm
*Very accurate (±0.2 °C) when used between 0 °C to 70 °C [32 °F to
158 °F]. Other ranges and tolerances are available.
10 % Tolerance at 25 °C [77 °F], insulated leads
OPTIONS
OHM
100
R/T CURVE
REFERENCE
17
17
10A
10A
16
16
16
16
16
18
1
198-101CAG-A01
198-301CAG-A01
198-501DAG-A01
198-102DAG-A01
198-202LAG-A01
198-302LAG-A01
198-502LAG-A01
198-103LAG-A01
198-203LAG-A01
198-303KAG-A01
198-503QAG-A01
198-104QAG-A01
Epoxy-coated chip
300
500
38,1
[1.50]
1,000
2,000
3,000
5,000
10,000
20,000
30,000
50,000
100,000
2,54 MAX
[0.10]
1
10 % Tolerance at 25 °C [77 °F], uninsulated leads
OHM
100
300
R/T CURVE
REFERENCE
17
17
10A
10A
16
16
16
16
16
18
1
197-101CAG-A01
197-301CAG-A01
197-501DAG-A01
197-102DAG-A01
197-202LAG-A01
197-302LAG-A01
197-502LAG-A01
197-103LAG-A01
197-203LAG-A01
197-303KAG-A01
197-503QAG-A01
197-104QAG-A01
500
1,000
2,000
3,000
5,000
10,000
20,000
30,000
50,000
100,000
1
10 % Tolerance at 25 °C [77 °F], insulated leads
OHM
100
300
R/T CURVE
REFERENCE
17
17
10A
10A
16
16
16
16
16
18
1
199-101CAG-A01
199-301CAG-A01
199-501DAG-A01
199-102DAG-A01
199-202LAG-A01
199-302LAG-A01
199-502LAG-A01
199-103LAG-A01
199-203LAG-A01
199-303KAG-A01
199-503QAG-A01
199-104QAG-A01
500
1,000
2,000
3,000
5,000
10,000
20,000
30,000
50,000
100,000
1
19
www.honeywell.com/sensing
TEMPERATURE - THERMISTORS
TEMPERATURE - THERMISTORS
Disc Thermistors
UNI-CURVE Interchangeable Thermistors
Uncoated or epoxy-coated Disc thermistors are available in a broad
range of custom resistance values and R/T curves. They are only
available with uninsulated leads. Diameters range from 2,54 mm [0.1 in]
to 10,16 mm [0.4 in]. They are ideally suited for low cost applications
with a maximum temperature of 150 °C [302 °F]. They are also well
suited for PC board mount and are available on tape and reel.
The UNI-CURVE Interchangeable thermistors are temperature-matched.
They offer additional cost savings by eliminating the need for individual
resistance temperature calibration, as well as standardization of circuit
components and simplification of design and replacement problems.
Operating temperature range:
Encapsulation:
-40 °C to 150 °C* [-40 °F to 302 °F]*
Epoxy-coated
Operating temperature range:
Encapsulation:
Lead material:
-60 °C to 150 °C [-76 °F to 302 °F]
Epoxy-coated or uncoated
Uninsulated: tinned copper/copper alloy
Varies with size,
Lead material:
Dissipation constant (DC):
Time constant (TC):
Tinned copper alloy
0.75 mW/°C in still air min.
15 s in still air max.
Dissipation constant (DC):
Resistance range at 25 °C [77 °F]:
1 kOhm to 100 kOhm
ranges from 3 mW/°C to 8 mW/°C
Varies with size,
*Very accurate (±0.2 °C) when used between 0 °C to 70 °C [32 °F to
158 °F]. Other ranges and tolerances are available.
Time constant (TC):
ranges from 10 s to 32 s
Resistance range at 25 °C [77 °F]:
100 Ohm to 100 kOhm
38,1
[1.50]
OPTIONS
2,4
[0.095]
Epoxy-coated chip
6,35
[0.25]
0,2032 DIA. TINNED COPPER ALLOY
[0.008]
OPTIONS
38,1
[1.50]
±0,2 °C Tolerance at 25 °C [77 °F]
0 °C to 70 °C [32 °F to 158 °F]
OHM
1,000
2,252
3,000
5,000
10,000
30,000
30,000
50,000
100,000
R/T CURVE
REFERENCE
10A
16
16
16
16
18
1
192-102DET-A01
192-222LET-A01
192-302LET-A01
192-502LET-A01
192-103LET-A01
192-303KET-A01
192-303QET-A01
192-503QET-A01
192-104QET-A01
LEAD SPACING
10 % Tolerance at 25 °C [77 °F]
Lead diameter 0,4064 mm [0.016 in]
Lead spacing 2,54 mm [0.1 in]
1
1
OHM
500
1,000
3,000
5,000
10,000
50,000
100,000
R/T CURVE
DC MIN.
TC MAX.
10
10
10
10
10
10
10
REFERENCE
10
10
16
16
16
1
3
4
3
4
4
3
3
140-501FAG-RB1
140-102FAG-RB1
140-302LAG-RB1
140-502LAG-RB1
140-103LAG-RB1
140-503QAG-RB1
140-104QAG-RB1
±0,5 °C Tolerance at 25 °C [77 °F]
0 °C to 70 °C [32 °F to 158 °F]
OHM
1,000
2,252
3,000
5,000
10,000
30,000
30,000
50,000
100,000
R/T CURVE
REFERENCE
1
10A
16
16
16
16
18
1
192-102DEV-A01
192-222LEV-A01
192-302LEV-A01
192-502LEV-A01
192-103LEV-A01
192-303KEV-A01
192-303QEV-A01
192-503QEV-A01
192-104QEV-A01
10 % Tolerance at 25 °C [77 °F]
Lead diameter 0,508 mm [0.020 in]
Lead spacing 5,08 mm [0.2 in]
1
1
OHM
100
200
R/T CURVE
DC MIN.
TC MAX.
16
18
20
20
22
35
20
25
REFERENCE
10
10
10
16
16
16
1
4
5
6
6
6
7
4
6
7
143-101FAG-RC1
143-201FAG-RC1
143-501FAG-RC1
143-102LAG-RC1
143-302LAG-RC1
143-502LAG-RC1
143-103QAG-RC1
143-303QAG-RC1
143-503QAG-RC1
±1,0 °C Tolerance at 25 °C [77 °F]
0 °C to 70 °C [32 °F to 158 °F]
300
1,000
3,000
5,000
10,000
30,000
50,000
OHM
1,000
2,252
3,000
5,000
10,000
30,000
30,000
50,000
100,000
R/T CURVE
REFERENCE
10A
16
16
16
16
18
1
192-102DEW-A01
192-222LEW-A01
192-302LEW-A01
192-502LEW-A01
192-103LEW-A01
192-303KEW-A01
192-303QEW-A01
192-503QEW-A01
192-104QEW-A01
1
1
30
1
1
20
www.honeywell.com/sensing
TEMPERATURE - THERMISTORS
Uncoated chip
Standard Bead Thermistors
2,54
[0.10]
Standard Bead thermistors are hermetically-sealed in glass. These small
units provide maximum stability when used to 300 °C [572 °F] for high
temperature design requirements. They are ideally suited for the most
stringent military, aerospace and oceanographic applications.
38,1
[1.50]
Operating temperature range:
Encapsulation:
-60 °C to 300 °C [-76 °F to 572 °F]
Glass hermetic seal
Lead material:
Platinum iridium
Dissipation constant (DC):
Time constant (TC):
0.4 mW/°C in still air min.
4 s in still air max.
Resistance range at 25 °C [77 °F]:
200 Ohm to 1 MOhm
LEAD SPACING
OPTIONS
10 % Tolerance at 25 °C [77 °F]
Lead diameter 0,4064 mm [0.016 in]
Lead spacing 2,54 mm [0.1 in]
Adjacent leads
2,29
[0.09]
9,5
[0.375]
1,14 DIA.
[0.045]
OHM
500
1,000
3,000
5,000
10,000
50,000
100,000
R/T CURVE
DC MIN.
TC MAX.
10
10
10
10
10
10
10
REFERENCE
10
10
16
16
16
1
3
4
3
4
4
3
3
142-501FAG-RB1
142-102FAG-RB1
142-302LAG-RB1
142-502LAG-RB1
142-103LAG-RB1
142-503QAG-RB1
142-104QAG-RB1
0,1016 DIA.
[0.004]
20 % Tolerance at 25 °C [77 °F]
1
OHM
200
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1 M
R/T CURVE
RATIO 0 °C/50 °C
4.80
7.04
7.04
7.04
7.59
9.11
9.53
10.45
10.45
11.78
13.12
REFERENCE
8
11
11
11
12
13
14
15
15
4
112-201BAJ-B01
112-102EAJ-B01
112-202EAJ-B01
112-502EAJ-B01
112-103FAJ-B01
112-203HAJ-B01
112-503JAJ-B01
112-104KAJ-B01
112-204KAJ-B01
112-504NAJ-B01
112-105PAJ-B01
10 % Tolerance at 25 °C [77 °F]
Lead diameter 0,508 mm [0.020 in]
Lead spacing 5,08 mm [0.2 in]
OHM
100
200
300
500
1,000
3,000
5,000
10,000
30,000
50,000
R/T CURVE
DC MIN.
TC MAX.
16
18
20
25
20
22
35
20
REFERENCE
10
10
10
10
16
16
16
1
4
5
6
6
6
6
7
4
7
8
145-101FAG-RC1
145-201FAG-RC1
145-301FAG-RC1
145-501FAG-RC1
145-102LAG-RC1
145-302LAG-RC1
145-502LAG-RC1
145-103QAG-RC1
145-303QAG-RC1
145-503QAG-RC1
5
Axial leads
1
1
28
32
0,1016 DIA.
[0.004]
1,14 DIA
[0.045]
2,29
[0.090]
9,5
[0.375]
20 % Tolerance at 25 °C [77 °F]
OHM
2,000
5,000
10,000
100,000
600,000
R/T CURVE
RATIO 0 °C/50 °C
7.04
7.04
7.59
10.45
11.78
REFERENCE
11
11
12
15
4
112-202EAJ-H01
112-502EAJ-H01
112-103FAJ-H01
112-104KAJ-H01
112-604NAJ-H01
21
www.honeywell.com/sensing
TEMPERATURE - THERMISTORS
Small Bead Thermistors
Glass Probe Thermistors
Small Bead thermistors feature relatively uniform size, offer ultra-fast time
response and are highly sensitive to electric power. They are ideally
suited for use in low heat capacity applications and their micro size
makes them perfect for use in extremely small assemblies such as
catheters and hypodermic needles. They are also used in self-heat
applications such as gas analysis, gas flow measurement and thermal
conductivity analysis.
Glass Probe thermistors are shock resistant, rugged, glass-encapsulated
units that are ideally suited for immersion in fluid and convenient for
mounting in air sensor assemblies. They are available in two
configurations: standard and mini.
Operating temperature range:
Encapsulation:
-60 °F to 300 °C [-72 °F to 572 °F]
Glass
Lead material:
Dissipation constant (DC):
Dumet (copper-clad Ni-Fe wire)
• Standard: 1.0 mW/°C in still air min.
• Mini: 0.7 mW/°C in still air min.
• Standard: 22 s in still air max.
• Mini: 10 s in still air max.
1 kOhm to 10 MOhm
Operating temperature range:
Encapsulation:
-60 °C to 300 °C [-76 °F to 572 °F]
Glass hermetic seal
Lead material:
Platinum iridium
Time constant (TC):
Dissipation constant (DC):
Time constant (TC):
0.1 mW/°C in still air min.
1 s in still air max.
Resistance range at 25 °C [77 °F]:
Resistance range at 25 °C [77 °F]:
2 kOhm to 100 kOhm
OPTIONS
Standard
OPTIONS
Adjacent leads
50,8
[2.00]
12,7
[0.50]
2,51
[0.020]
9,5
[0.375]
2,54
[0.10]
0,36 DIA.
[0.014]
0,3048 DIA. DUMET
[0.012]
0,0254 DIA.
[0.001]
20 % Tolerance at 25 °C [77 °F]
At 25 °C [77 °F]
dc 1.0 mW/°C min., TC 22 s max.
OHM % TOLERANCE R/T CURVE RATIO 0 °C/50 °C [32 °F/122 °F]
REFERENCE
2,000
8,000
30,000
25
20
25
9
11
11
5.50
7.04
7.04
111-202CAK-B01
111-802EAJ-B01
111-303EAK-B01
OHM
1,000
2,000
R/T CURVE
RATIO
7.04
7.04
7.04
7.59
REFERENCE
11
11
11
12
14
15
15
4
121-102EAJ-Q01
121-202EAJ-Q01
121-502EAJ-Q01
121-103FAJ-Q01
121-502JAJ-Q01
121-104KAJ-Q01
121-202KAJ-Q01
121-504NAJ-Q01
121-105PAJ-Q01
121-106QAJ-Q01
5,000
10,000
50,000
100,000
200,000
500,000
1 M
9.53
Axial leads
10.45
10.45
11.89
13.12
15.65
5
6
10 M
0,0254 DIA.
[0.001]
0,36 DIA
[0.014]
Mini
0,51
[0.020]
9,5
[0.375]
12,7
[0.50]
31,5
[1.25]
1,5
[0.06]
At 25 °C [77 °F]
0,2032 DIA. DUMET
[0.008]
OHM % TOLERANCE R/T CURVE RATIO 0 °C/50 °C [32 °F/122 °F]
REFERENCE
2,000 25
8,000 20
10,000 20
100,000 25
9
11
11
13
5.50
7.04
7.04
9.11
111-202CAK-H01
111-802EAJ-H01
111-103EAJ-H01
111-104HAK-H01
20 % Tolerance at 25 °C [77 °F]
dc 0.7 mW/°C min., TC 10 s max.
OHM
1,000
2,000
10,000
50,000
100,000
R/T CURVE
RATIO
7.04
7.04
7.59
9.53
REFERENCE
11
11
12
14
15
120-102EAJ-Q01
120-202EAJ-Q01
120-103FAJ-Q01
120-502JAJ-Q01
120-104KAJ-Q01
10.45
22
www.honeywell.com/sensing
TEMPERATURE - THERMISTORS
E-I Matched Bead Thermistors
ICL Inrush Current Limiter Thermistors
E-I Matched Bead thermistors are designed for use in gas
chromatography and other thermal conductivity gas analysis
instruments. Each bead is mounted to a special hermetically-sealed
header. For maximum sensitivity, the higher resistance units should be
used at higher ambient temperatures.
ICL Inrush Current Limiter thermistors are a cost-effective way of limiting
the inrush of current that may damage components in a switching
power supply and in other power devices when the equipment is turned
on. These devices have solderable leads and are PC board mountable.
Operating temperature range:
Maximum steady state current:
Encapsulation:
Lead material:
Dissipation constant (DC):
Time constant (TC):
-40 °C to 185 °C [-40 °F to 365 °F]
1 A to 30 A
Operating temperature range:
Encapsulation:
Lead material:
-60 °C to 300 °C [-76 °F to 572 °F]
Glass hermetic seal
Black silicone
Tinned copper
12.7 mW/°C to 23 mW/°C
32 s to 93 s
0.5 Ohm to 220 Ohm ±20 %
Tinned Ni-Fe
THERMISTOR
BEAD
12,7
[0.50]
Resistance range at 25 °C [77 °F]:
Resistance at max. steady state current:
0.01 Ohm to 2.34 Ohm
Max. diameter
Max. thickness
Lead diameter
9,5 mm [0.374 in] to 32.0 mm [1.260 in]
5,0 mm [0.204 in] to 8.0 mm [0.327 in]
0,8 mm [0.032 in] to 1.0 mm [0.040 in]
9,65
[0.38]
31,75
[1.25]
0,76 DIA.TINNED Ni-Fe
[0.03]
THICKNESS
DIA.
OPTIONS
Helium-matched assembly
Characteristics
115-802EDJ-801
8000 Ohm ±25 %
23,200 Ohm
3,200 Ohm
6.56 to 7.99
3495 K
Resistance at 25 °C [77 °F]
Resistance at 0 °C [32 °F] (approx.)
Resistance at 50 °C [122 °F] (approx.)
Ratio of resisistance 0 °C/50 °C
Beta nominal at 25 °C
25,4 MIN.
[1.00]
7,87 NOM.
[0.310]
2.54 NOM.
[0.10]
Temperature coefficient at 25 °C
Time constant (TC) still air max.
Dissipation constant (DC) still air min.
DC helium
Power rating (air)
Power rating (helium)
Max. ambient temperature
Max. operating temperature (including self-heat) 300 °C [572 °F]
Resisistance at max. operating temperature
-3.9 %/°C
1 s
0.16 mW/°C
0.5 mW/°C
45 mW
OHM
MAX. STEADY
STATE CURRENT (A)
RESISTANCE AT MAX.
STEADY STATE CURRENT (OHM)
REFERENCE
140 mW
250 °C [482 °F]
0.5
1
1
30
20
30
18
8
8
15
6
7
2
3.2
5
6
8
4
4
2
2
2
2.5
3
2
0.01
0.02
0.02
0.03
0.07
0.06
0.03
0.1
0.07
0.3
0.18
0.13
0.15
0.1
ICL32OR530-01
ICL221R020-01
ICL321R030-01
ICL222R018-01
ICL152R508-01
ICL122R508-01
ICL222R515-01
ICL155R006-01
ICL155R007-01
ICL1010002-01
ICL1010004-01
ICL1210005-01
ICL1510006-01
ICL2210008-01
ICL1512004-01
ICL1516004-01
ICL1220002-01
ICL1240002-01
ICL1250002-01
ICL1580003-01
ICL2212103-01
ICL1522102-01
2
25 Ohm
2.5
2.5
2.5
5
2 % resistance at 25 °C [77 °F]
5
DESCRIPTION
REFERENCE
115-802EDJ-801
10
10
10
10
10
12
16
20
40
50
80
120
220
Two 111-802EAJ-H01 each mounted on a glass hermetic seal and matched in
helium to within 30 mV, 25 mV and 20 mV of each other at 2 mA, 5 mA,
10 mA and 15 mA.
Air-matched assembly
Characteristics
Resistance at 25 °C [77 °F]
Resistance at 0 °C [32 °F] (approx.)
Resistance at 50 °C [122 °F] (approx.)
Ratio of resistance 0 °C/50 °C
Beta nominal at 25 °C
0.26
0.27
0.5
115-202CDK-801
2000 Ohm ±25 %
4900 Ohm
890 Ohm
0.6
0.72
0.75
0.9
4.95 to 6.95
3000 K
0.8
Temperature coefficient at 25 °C
Time constant (TC) still air max.
Dissipation constant (DC) still air min.
DC helium
-3.4 %/°C
1 s
0.16 mW/°C
0.5 mW/°C
15 mW
Power rating (air)
Power rating (helium)
60 mW
Max. ambient temperature
Max. operating temperature (including self-heat)
Resisistance at max. operating temperature
100 °C [212 °F]
150 °C [302 °F]
88 Ohm
5 % resistance at 25 °C [77 °F]
DESCRIPTION
REFERENCE
Two 111-202CAK-H01 each mounted on a glass hermetic seal and matched in
air to within 15 mV of each other at 5 mA, 10 mA and 15 mA.
115-202CDK-801
23
www.honeywell.com/sensing
TEMPERATURE - PROBES
Temperature Sensors - Probes
Temperature Sensor Probes are finished thermister assemblies complete
with thermister housing, extension leads and sometimes a connector. A
variety of customized packages are available.
NOTE: The products in this section do not follow the “how to use this
catalogue” instructions provided in the catalogue introduction. Specific
reference numbers are not given due to their custom nature. Please
contact your local Honeywell sales office for ordering information.
ES110 Series Inlet Air Temperature
Sensor Probes
ES120 Series Coolant/Oil Temperature
Sensor Probes
The ES110 probe is a thermistor mounted into a plastic lead frame and
assembled into a metal body. This subassembly is then overmolded to
produce both the electrical connection system and the hexagonal shape
for easy installation. Two end configurations are available depending
upon response required or degree of protection. The all-plastic design
reduces heat loss through the sensor, thereby reducing wind chill effects.
The ES120 probe is a thermistor mounted into a plastic lead frame and
assembled into a metal body. This subassembly is then overmolded to
produce both the electrical connection system and the hexagonal shape
for easy installation. The all-plastic design reduces heat loss through the
sensor, thereby reducing wind chill effects.
Operating temperature range:
-40 °C to 155 °C [-40 °F to 311 °F]
Encapsulation:
NTC (Negative Temperature Coefficient) encapsulated
in thermal epoxy
Operating temperature range:
-40 °C to 155 °C [-40 °F to 311 °F]
Encapsulation:
Standard NTC (Negative Temperature Coefficient) epoxy
protection
Lead material:
Terminals are 2,8 mm x 0,8 mm [0.11 in x 0.03 in] brass
with a copper flash protection layer with final plating to
customer requirement (silver, tin, gold, etc.)
Tor values (time to reach 63.2 % of the difference
between two temperatures) are typically 19 s rising
temperature and 14 s falling temperature
None
Lead material:
Terminals are 2,8 mm x 0,8 mm [0.11 in x 0.03 in]
brass with a copper flash protection layer with final plating
to customer requirement (silver, tin, gold, etc.)
0.85 mW/°C in still air at 25 °C [77 °F]
Dissipation constant:
Time constant:
Dissipation constant:
Time constant:
1 s in liquids, 12 s max. in still air
2.5 kOhm at 20 °C [68 °F] ±5 %
Resistance range at 25 °C [77 °F]
Resistance range at 25 °C [77 °F]
2.5 kOhm at 20 °C [68 °F] ±5 %
SERIES NAME
SERIES NAME
ES110 Inlet Air Temperature Sensor Probe
ES120 Coolant/Oil Temperature Sensor Probe
24
www.honeywell.com/sensing
TEMPERATURE - PROBES
Air Conditioning Temperature Sensor
Probes
Earth Return (Ground) Temperature
Sensor Probes
A fully overmolded and protected sensor incorporating a specially
developed NTC (Negative Temperature Coefficient) to withstand very
aggressive, damp operating conditions. The housing is snap fit for easy
assembly.
An all-metal temperature sensor, with the body being the ground,
incorporating a flat disc thermistor held flush on the base of the body by
a spring-loaded pressure pad. This sensor provides a quick response to
small variations in high temperature changes.
Operating temperature range:
Encapsulation:
-30 °C to 100 °C [-22 °F to 212 °F]
Special NTC epoxy coating
Operating Temperature Range:
Encapsulation:
-40 °C to 155 °C [-40 °F to 311 °F]
NTC (negative temperature coefficient)
encapsulated in a silicone paste
Standard Lucar type or other variations
3 mW/°C in still air
Lead material:
Terminals are 2,8 mm x 0,8 mm [0.11 in x 0.03 in]
brass with a copper flash protection layer with
Lead Material:
Dissipation Constant:
Time Constant:
final plating to customer requirement (silver, tin, gold, etc.)
Dissipation constant:
Time constant:
2.5 mW/°C in still air
2 s in water, 15 s max. in still air
9 kOhm at 0 °C [32 °F] ±1.5 %
10 s in automotive coolant
Per customer requirements
Resistance Range at 25 °C [77 °F]
Resistance range at 25 °C [77 °F]
NAME
NAME
Air Conditioning Temperature Sensor Probe
Earth Return (Ground) Temperature Sensor Probe
Surface Temperature Sensor Probes
Refrigerant Temperature Sensor Probes
Sensor assembly is designed to have good heat conductivity between the
thermistor element and the area to be monitored. Time response is
consistent with the thermal conductivity of the surface being measured.
Multiple configurations allow sensor to be mounted, bolted, riveted or
attached adhesively.
A fully sealed, quick response temperature sensor suitable for use in
HVAC systems.
Operating temperature range:
-40 °C to 140 °C [-40 °F to 284 °F]
Encapsulation:
NTC (Negative Temperature Coefficient) encapsulated in a
thermal heat paste
Operating temperature range:
Encapsulation:
-60 °C to 150 °C [-76 °F to 302 °F]
Thermally conductive epoxy used to pot
discrete component into surface-style housing
Lead material:
Terminals are 1,5 mm x 0,6 mm [0.06 in x 0.02 in]
brass with a copper flash protection layer with final
plating to customer requirement (silver, tin, gold, etc.)
Lead material:
Insulated lead wires and terminals when required, other
options available
Dissipation constant:
Time constant:
Tor values (time to reach 63.2 % of the difference
between two temperatures) are typically 10 s
rising temperature and 6 s falling temperature
None
Dissipation constant:
Time constant:
3.3 mW/°C to 12 mW/°C
(varies with size and housing style)
1 s to 40 s (application dependent)
Resistance range at 25 °C [77 °F]
2.5 kOhm at 20 °C [68 °F],
Resistance range at 25 °C [77 °F]
Per customer requirements
calibrated at ±3 % at 100 °C [212 °F]
NAME
NAME
Surface Temperature Sensor Probe
Refrigerant Temperature Sensor Probe
25
www.honeywell.com/sensing
TEMPERATURE - PROBES
Immersion Temperature Sensor Probes
Air/Gas Temperature Sensor Probes
Custom designed and application specific, immersion probes are
designed to be directly placed in the liquid medium to be measured. A
large variety of housing alloys are available. Multiple configurations allow
easy mounting.
Air/Gas probes contain an exposed thermistor element because gas is
not as good a heat conductor or thermal sink as a liquid, and because
time response is normally an important consideration. The sensor
housing may be composed of plastic or other thermally conductive
materials to reduce conduction and heat from the gas circulating around
the thermistor. Multiple configurations allow easy mounting.
Operating temperature range:
-60 °C to 300 °C [-76 °F to 572 °F]
Encapsulation:
NTC (Negative Temperature Coefficient) encapsulated in
housing appropriate to the application
Insulated lead wires and terminals when required,
other options available
Operating temperature range:
Encapsulation:
-60 °C to 150 °C [-76 °F to 302 °F]
None, sensing element is exposed
Lead material:
Lead material:
Insulated lead wires and terminals when required,
other options available
Dissipation constant:
Time constant:
5 mW/°C to 10 mW/°C (varies with size
and housing style)
Dissipation constant:
Time constant:
0.1 mW/°C to 3 mW/°C (design specific)
4 s to 150 s (application and design dependent)
1 s to 12 s (design dependent)
Resistance range at 25 °C [77 °F]
Per customer requirements
Resistance range at 25 °C [77 °F]
Per customer requirements
NAME
NAME
Air/Gas Temperature Sensor Probe
Immersion Temperature Sensor Probe
26
www.honeywell.com/sensing
THERMOSTATS - COMMERCIAL
Thermostats - Commercial
Commercial thermostats include products for use in a wide array of small
and major appliances, automotive applications, office copy machines,
heat and smoke detectors and HVAC equipment. These snap-action
thermostats include automatic or manual reset options, phenolic or
ceramic housings, and a variety of mounting brackets and terminal
options.
NOTE: The products in this section do not follow the “how to use this
catalogue” instructions provided in the catalogue introduction. Specific
reference numbers are not given due to their custom nature. Please
contact your local Honeywell sales office for ordering information.
2450HR
2450R/2450HR/2455R Series Phenolic
Automatic Reset Thermostats
6,73
[0.265]
2,36 [0.093] DIA.
1,57 [0.062] DEEP
A temperature-sensitive bimetal disc, electrically isolated from the switch,
actuates the normally closed contacts. The contacts open when the
surface or ambient temperatures increase to the operating snap point of
the calibrated disc. Response to temperature changes is extremely rapid
due to the inherently low mass of the disc and the small size of the
product. These products are factory calibrated to the customer’s
specification.
13,94
[0.549]
12,34
14,43 DIA.
[0.568]
[0.486]
9,12
[0.359]
16,0 DIA.
[0.630]
Reset type:
Amperage capacity:
Automatic
15 A resistive max.
Housing material:
Operating temperature range:
Environmental exposure range:
Phenolic
0 °C to 150 °C [32 °F to 302 °F]
0 °C to 177 °C [32 °F to 350 °F]
SERIES NAME
2450HR Phenolic Automatic Reset Thermostat
2450R
2455R
14,43 DIA.
[0.568]
9,63
[0.379]
14,43 DIA.
[0.568]
11,91
[0.469]
16,0 DIA.
[0.630]
0,51
[0.020]
16,0 DIA.
[0.630]
0,51
[0.020]
SERIES NAME
2455R Phenolic Automatic Reset Thermostat
SERIES NAME
2450R Phenolic Automatic Reset Thermostat
27
www.honeywell.com/sensing
THERMOSTATS - COMMERCIAL
2450CM/2455RM Series Ceramic and
Phenolic Manual Reset Thermostats
2450RC/2450RCH/2455RC Series
Ceramic Automatic Reset Thermostats
A temperature-sensitive bimetal disc, electrically isolated from the switch,
actuates the normally closed contacts. The contacts open when the
surface or ambient temperatures increase to the operating snap point of
the calibrated disc. The circuit will stay open above room ambient
temperature until the manual reset button is pressed. Response to
temperature changes is extremely rapid due to the inherently low mass
of the disc and the small size of the product.
A temperature-sensitive bimetal disc, electrically isolated from the switch,
actuates the normally closed contacts. The contacts open when the
surface or ambient temperatures increase to the operating snap point of
the calibrated disc. Response to temperature changes is extremely rapid
due to the inherently low mass of the disc and the small size of the
product.
Reset type:
Amperage capacity:
Housing material:
Operating temperature range:
Environmental exposure range:
Automatic
15 A resistive max.
Reset type:
Amperage capacity:
Housing material:
Operating temperature range: 52 °C to 232 °C [125 °F to 450 °F] (ceramic)
52 °C to 150 °C [125 °F to 302 °F] (phenolic)
Manual
15 A resistive max.
Ceramic or phenolic
Ceramic
0 °C to 260 °C [32 °F to 500 °F]
–20 °C to 287 °C [0 °F to 550 °F]
Environmental exposure range: 10 °C to 260 °C [50 °F to 500 °F] (ceramic)
10 °C to 177 °C [50 °F to 350 °F] (phenolic)
2450RC
16,00
[0.379]
2450CM
1,04 [0.041] MAX TRAVEL OF
RESET BUTTON
ON CONTACT OPENING
15,98
[0.629]
9,63
14,48
[0.379]
12,90 [0.570]
[0.508]
14,43 DIA.
[0.568]
9,55
[0.376]
9,04
[0.356]
0,51
[0.020]
16,0 DIA.
[0.630]
0,51
[0.020]
SERIES NAME
2450RC Ceramic Automatic Reset Thermostat
SERIES NAME
2450CM Ceramic Manual Reset Thermostat
2450RCH
2,36 [0.093] DIA.
1,57 [0.062] DEEP
2455RM
1,04 [0.041] MAX TRAVEL
OF RESET BUTTON ON
CONTACT OPENING
14,48
2,77 DIA. RESET
[0.109] BUTTON
[0.570]
12,90
[0.508]
14,43 DIA.
[0.568]
9,04
[0.356]
15,88 ON CONTACT
[0.625] CLOSING
16,0 DIA.
[0.630]
ENCLOSED DISK
14,43 DIA.
[0.568]
11,91
[0.469]
SERIES NAME
2450RCH Ceramic Automatic Reset Thermostat
16,0 DIA.
[0.630]
0,51
[0.020]
2455RC
SERIES NAME
2455RM Phenolic Manual Reset Thermostat
14,43 DIA.
[0.568]
11,91
[0.469]
16,0 DIA.
[0.630]
0,51
[0.020]
SERIES NAME
2455RC Ceramic Automatic Reset Thermostat
28
www.honeywell.com/sensing
THERMOSTATS - COMMERCIAL
2450A/2455A Series Heat Detection
2450R/2450RCH/2455R/2455RC Series
“One-shot” ½ in Thermostats
Products are designed for high limit applications where automatic reset
is not desired.
Thermostats
°
°
The gold contacts open or close on a temperature rise of 47 C to 107 C
°
°
[117 F to 225 F].
Reset type:
Amperage capacity:
Housing material:
Operating temperature range:
Environmental exposure range:
Automatic
15 A resistive max.
Reset type:
Amperage capacity:
Housing material:
None
15 A resistive max.
ceramic or phenolic
Phenolic, epoxy-sealed cap and terminal
°
°
°
°
°
°
°
°
47 C to 107 C [117 F to 225 F]
Operating temperature range: 52 C to 260 C [125 F to 500 F] (ceramic)
°
°
°
°
°
°
°
0 C to 150 C [32 F to 302 ° F]
52 C to 150 C [125 F to 302 F] (phenolic)
°
°
Environmental exposure range:
18 °C to 316 C [0 °F to 600 F] (ceramic)
°
°
°
18 C to 177 C [0 °F to 350 F] (phenolic)
2450A
2450R
9,63
[0.379]
14,43 DIA.
[0.568]
9,63
[0.379]
0,51
[0.020]
16,0 DIA.
[0.630]
0,51
[0.020]
SERIES NAME
2450A Heat Detection Thermostat
2455A
SERIES NAME
2450R Phenolic “One-shot” ½ in Thermostat
11,91
[0.469]
2450RCH
2,36 [0.093] DIA.
1,57 [0.062] DEEP
0,51
[0.020]
14,48
[0.570]
12,90
[0.508]
SERIES NAME
2455A Heat Detection Thermostat
14,43 DIA.
[0.568]
9,04
[0.356]
2455RBV Series Overmolded Automatic
Reset Thermostats
A temperature-sensitive bimetal disc, electrically isolated from the switch,
actuates the normally closed contacts. The contacts open when the
surface or ambient temperatures increase to the operating snap point of
the calibrated disc. Response to temperature changes is extremely rapid
due to the inherently low mass of the disc and the small size of the
product.
16,0 DIA.
[0.630]
ENCLOSED DISK
SERIES NAME
2450RCH Ceramic “One-shot” ½ in Thermostat
2455R
Reset type:
Amperage capacity:
Automatic
15 A resistive max.
14,43 DIA.
[0.568]
11,91
[0.469]
Housing material:
Operating temperature range:
Environmental exposure range:
Ceramic or phenolic, epoxy overmold
°
°
°
°
-12 C to 105 C [10 F to 221 F]
°
°
-18 °C to 121 C [0 F to 250 °F]
16,0 DIA.
[0.630]
0,51
[0.020]
2455RBV
AS REQUIRED
SERIES NAME
2455R Phenolic “One-shot” ½ in Thermostat
WIRE GAGE AND
INSULATION AS
REQUIRED
2455RC
AS REQUIRED
14,43 DIA.
[0.568]
11,91
[0.469]
18,54
[0.730]
16,0 DIA.
[0.630]
0,51
[0.020]
17,27 DIA.
[0.680]
0,51
[0.020]
SERIES NAME
2455RBV Overmolded Automatic Reset Thermostat
SERIES NAME
2455RC Ceramic “One-shot” ½ in Thermostat
29
www.honeywell.com/sensing
THERMOSTATS - COMMERCIAL
2450R Series Annular Ring Cap
Automatic Reset Thermostats
A temperature-sensitive bimetal disc, electrically isolated from the switch,
actuates the normally closed contacts. The contacts open when the
surface or ambient temperatures increase to the operating snap point of
the calibrated disc. Response to temperature changes is extremely rapid
due to the inherently low mass of the disc and the small size of the
product.
2450R Series Fully Sealed Thermostats
A temperature-sensitive bimetal disc, electrically isolated from the switch,
actuates the normally closed contacts. The contacts open when the
surface or ambient temperatures increase to the operating snap point of
the calibrated disc. Response to temperature changes is extremely rapid
due to the inherently low mass of the disc and the small size of the
product.
Reset type:
Amperage capacity:
Housing material:
Automatic
15 A resistive, 12 Vdc
Reset type:
Amperage capacity:
Housing material:
Automatic
15 A resistive, 12 Vdc
Phenolic, can be partially or totally sealed
against water ingress
Phenolic housing, aluminium cap totally
encapsulated in water resistant epoxy
°
°
Operating temperature range:
Environmental exposure range:
Life cycle capability:
Low temperature differential:
Switch temperature tolerance:
-10 °C to 55 °C [14 F to 131 F]
°
°
°
°
Operating temperature range:
Environmental exposure range:
Life Cycle Capability:
Low Temperature Differential:
Switch Temperature Tolerance:
-10 C to 55 C [14 F to 131 F]
-40 °C to 130 C [-40 °F to 266 °F]
°
°
°
°
°
-40 C to 130 C [-40 F to 266 F]
300 K at 12 Vdc, 10 A
300 K at 12 Vdc, 10 A
°
Down to 8 C [46 °F]
°
°
Down to 8 C [46 F]
°
±3 C
°
±3 C
16,1 MAX.
[0.63]
14,43 DIA.
[0.568]
9,63
[0.379]
11,5
[0.45]
16,0 DIA.
[0.630]
0,51
[0.020]
SERIES NAME
2450R Phenolic Annular Ring Cap Automatic Reset Thermostat
2450R/2455R Series Protected
Thermostats
A temperature-sensitive bimetal disc, electrically isolated from the switch,
actuates the normally closed contacts. The contacts open when the
surface or ambient temperatures increase to the operating snap point of
the calibrated disc. Basic thermostat is protected from the environment
by sealing it in a metal housing or encapsulating it in epoxy.
SERIES NAME
2450R Fully Sealed Thermostat
Reset type:
Amperage capacity:
Automatic
15 A resistive, 12 Vdc
Housing material:
Operating temperature range:
Environmental exposure range:
Brass, aluminium, stainless steel and epoxy
°
°
°
°
15 C to 130 C [59 F to 266 F]
°
°
-40 C to 155 C [-40 °F to 311 °F]
SERIES NAME
2450R Protected Thermostat
2455R Protected Thermostat
30
www.honeywell.com/sensing
THERMOSTATS - PRECISION
Thermostats - Precision
Precision snap-action thermostats include both hermetic and non-
hermetic devices for use in a wide array of applications including
computers, copy machines, aircraft, radar equipment, medial equipment
and electronic control systems. We also offer custom-packaged
thermostats for application flexibility and industrial-grade thermostats
designed to operate in extreme environmental conditions.
NOTE: The products in this section do not follow the “how to use this
catalogue” instructions provided in the catalogue introduction. Specific
reference numbers are not given due to their custom nature. Please
contact your local Honeywell sales office for ordering information.
3100/3106 Series Hermetic Thermostats
The 3100/3106 Series is a single pole, single throw switch activated by a
snap-action bimetal disc. Temperature calibrations are pre-set at the
factory and each unit is 100 % thermally and mechanically inspected. It is
available to open or close on temperature rise. The case is laser welded to
form a hermetically-sealed steel housing with a glass-to-metal seal at the
terminal junction. It is manufactured and tested to meet or exceed critical
commercial and industrial specifications. The 3106 Series has gold alloy
contacts for low voltage applications.
Amperage:
0.5 A resistive (3106 Series)
7 A resistive (3100 Series)
Housing material:
Operatingtemperaturerange:
Steel housing with glass-to-metal
seal at terminal junction
°
°
°
°
-29 C to 260 C [-20 F to 500 F] (3100 Series)
°
°
°
-29 C to 204 C [-20 F to 400 °F] (3106 Series)
°
°
Environmental exposure range:
Dielectric strength:
-62 C to 288 C [-80 °F to 550 °F]
MIL-STD-202, Method 301
1250 Vac 60 Hz terminal to case (3100, 3100U, 3106 Series)
1500 Vac 60 Hz terminal to case (3100UX Series)
SERIES NAME
3100 Hermetic Thermostat
3100U Hermetic Thermostat
3100UX Hermetic Thermostat
3106 Hermetic Thermostat
Insulation resistance:
MIL-STD-202, Method 302, Condition B
50 MOhm, 500 Vdc applied
MIL-STD-202, Method 307
25 mOhm (3106 Series)
Contact resistance:
50 mOhm (3100 Series)
Hermetic seal:
MIL-STD-202, Method 112, Condition A
1x10-5 atm cc/s
Moisture resistance:
MIL-STD-202 Method 106
31
www.honeywell.com/sensing
THERMOSTATS - PRECISION
3150/3156 Series Low Silhouette
Hermetic Thermostats
3800 Series Industrial-Grade Thermostats
for Severe Duty Applications
The 3150/3156 Series is a single pole, single throw switch activated by a
snap-action bimetal disc. Temperature calibrations are pre-set at the
factory and each unit is 100% thermally and mechanically inspected. It is
available to open or close on temperature rise. The case is laser welded to
form a hermetically-sealed steel housing with a glass-to-metal seal at the
terminal junction. The low silhouette and compact design make it
especially well suited for applications that require miniaturization. The
3156 Series has gold alloy contacts for low voltage applications.
The 3800 Series is used where high levels of vibration and mechanical
shock are common but a military device is not required. It is easily
customized for use in a variety of applications.
Amperage:
7 A resistrive
Housing material:
Steel housing with glass-to-metal seal at terminal junction
°
°
Operating temperature range:
Environmental exposure range:
Dielectric strength:
-29 °C to 260 C [-20 °F to 500 F]
°
°
-62 °C to 260 C [-80 °F to 500 F]
MIL-STD-202, Method 301
Amperage:
0.5 A resistive (3156 Series)
7 A resistive (3150 Series)
1250 Vac terminal to case
Insulation resistance:
Contact resistance:
Hermetic seal:
MIL-STD-202, Method 302, Condition B
50 MOhm min. terminal to case
MIL-STD-202, Method 307
Housing material:
Steel housing with glass-to-metal seal at
terminal junction
°
°
°
°
Operating temperature range:
Environmental exposure range:
Dielectric strength:
-29 C to 177 C [-20 F to 350 F]
50 mOhm max.
°
°
°
°
-62 C to 260 C [-80 F to 500 F]
MIL-STD-202, Method 301
MIL-STD-202, Method 112, Condition A
1 x 10-5 atm cc/s
750 Vac 60 Hz terminal to case (3150, 3156 Series)
1250 Vac 60 Hz terminal to case (3150U, 3156U Series)
1500 Vac 60 Hz terminal to case (3150UX Series)
Moisture resistance:
Vibration (random):
MIL-STD-202, Method 106
MIL-STD-202, Method 214
30 g, 20 Hz to 2,000 Hz
Insulation resistance:
MIL-STD-202, Method 302, Condition B
50 MOhm, 500 Vdc applied
MIL-STD-202, Method 307
25 mOhm (3156 Series)
Vibration (sinusoidal):
MIL-STD-202, Method 204,
Condition D 20 G, 20 Hz to 2,000 Hz
MIL-STD-202, Method 213, 400 G
MIL-STD-202. Method 107, Condition B
MIL-STD-202, Method 212, 20 G
Contact resistance:
Mechanical shock:
Thermal shock:
Acceleration:
50 mOhm (3150 Series)
Hermetic seal:
MIL-STD-202, Method 112, Condition A
1x10-5 atm cc/s
Moisture
Method 106
SERIES NAME
SERIES NAME
3150 Low Silhouette Hermetic Thermostat
3150U Low Silhouette Hermetic Thermostat
3150UX Low Silhouette Hermetic Thermostat
3156 Low Silhouette Hermetic Thermostat
3156U Low Silhouette Hermetic Thermostat
3800 Industrial Grade Thermostat
32
www.honeywell.com/sensing
THERMOSTATS - PRECISION
3000 Series Custom-packaged
Thermostats
The 3000 Series incorporates a Honeywell thermostat assembled in a
custom package for use in a variety of applications that require flexibility
in mounting and terminal configurations. A typical product includes a
3100 hermetic internal thermostat with a terminal selection, housing
selection and customized part number. These custom package devices
operate in extreme environmental conditions, including exposure to
hazardous substances, dust particles and liquid immersion.
Amperage:
Housing material:
Operating temperature range:
Environmental exposure range:
Dielectric strength:
7 A resistive
Stainless steel or brass
Insulation resistance:
Contact resistance:
Hermetic seal:
MIL-STD-202, Method 302
50 MOhm to 500 MOhm
MIL-STD-202, Method 307
50 mOhm max.
°
°
°
°
-29 C to 260 C [-20 F to 500 F]
°
°
°
°
-62 C to 288 C [-80 F to 550 F]
MIL-STD-202, Method 301
MIL-STD-202, Method 112, Condition A
1250 Vac 60 Hz terminal to case
1 x 10-5 atm cc/s
Moisture resistance:
MIL-STD-202 Method 106
Terminations for 3000-45X* and 3000-55X* Housings
Terminations for 3000-53X*
and 3000-141 Housings
1
0
WIRE LEADS,
HERMETIC
LENGTHS
1
CONNECTOR
AS REQ'D.
WIRE LEADS,
LENGTHS
BAYONET
OR THREADED
AS REQ'D.
2a
6,35 [0.25] MALE
QUICK CONNECTS
2a
6,35 [0.25] MALE
QUICK CONNECTS
3
WIRE LEADS,
LENGTHS
AS REQ'D.
2b
60˚
REF.
6,35 [0.25] MALE
QUICK CONNECTS
2b
60˚
REF.
6,35 [0.25] MALE
QUICK CONNECTS
1/2 - 14 NPT
THREAD
Housings
3000-45X*
Housings
25,4 [1.00]
3000-53X*
3/4 - 16 UNF-3A
THREAD
22,26 [0.875]
4a
6,35 [0.25] MALE
QUICK CONNECTS
PROBE
LENGTH
1/2 - 14 NPT
THREAD
1/2 - 14 NPT
THREAD
SENSING SURFACE
SENSING SURFACE
3000-55X*
3000-141
4b
22,26 [0.875]
25,4 [1.00]
60˚
REF.
6,35 [0.25] MALE
QUICK CONNECTS
1/2 - 14 NPT
THREAD
3/4 - 16 UNF - 3A
THREAD
1/2 - 14 NPT
THREAD
PROBE
LENGTH
SENSING SURFACE
SENSING SURFACE
SERIES NAME
3000 Custom-packaged Thermostat
33
www.honeywell.com/sensing
THERMOSTATS - PRECISION
3450R/3450HR/3455R Series Phenolic
Automatic Reset Thermostats
3450RC/3450RCH/3455RC Series
Ceramic Automatic Reset Thermostats
A temperature-sensitive bimetal disc, electrically isolated from the switch,
actuates the normally closed contacts. The contacts open when the
surface or ambient temperatures increase to the operating snap point of
the calibrated disc. Response to temperature changes is extremely rapid
due to the inherently low mass of the disc and the small size of the
product. These products are factory calibrated to the customer’s
specification.
A temperature-sensitive bimetal disc, electrically isolated from the switch,
actuates the normally closed contacts. The contacts open when the
surface or ambient temperatures increase to the operating snap point of
the calibrated disc. Response to temperature changes is extremely rapid
due to the inherently low mass of the disc and the small size of the
product.
Reset type:
Amperage capacity:
Housing material:
Operating temperature range:
Environmental exposure range:
Automatic
15 A resistive max.
Ceramic
Reset type:
Amperage capacity:
Housing material:
Operating temperature range:
Environmental exposure range:
Automatic
15 A resistive max.
Phenolic
°
°
°
°
0 C to 260 C [32 F to 500 F]
°
°
°
°
°
°
°
°
0 C to 150 C [32 F to 302 F]
-20 C to 287 C [0 F to 550 F]
°
°
°
°
0 C to 177 C [32 F to 350 F]
3450R
3450RC
16,00
[0.379]
14,43 DIA.
[0.568]
9,63
[0.379]
16,0 DIA.
[0.630]
0,51
[0.020]
9,63
[0.379]
SERIES NAME
3450R Phenolic Automatic Reset Thermostat
0,51
[0.020]
3450HR
SERIES NAME
3450RC Ceramic Automatic Reset Thermostat
6,73
[0.265]
2,36 [0.093] DIA.
1,57 [0.062] DEEP
3450RCH
13,94
[0.549]
2,36 [0.093] DIA.
1,57 [0.062] DEEP
12,34
14,43 DIA.
[0.568]
[0.486]
9,12
[0.359]
14,48
[0.570]
12,90
[0.508]
16,0 DIA.
[0.630]
14,43 DIA.
[0.568]
9,04
[0.356]
16,0 DIA.
[0.630]
ENCLOSED DISK
SERIES NAME
3450HR Phenolic Automatic Reset Thermostat
SERIES NAME
3450RCH Ceramic Automatic Reset Thermostat
3455R
3455RC
14,43 DIA.
[0.568]
11,91
[0.469]
14,43 DIA.
[0.568]
11,91
[0.469]
16,0 DIA.
[0.630]
0,51
[0.020]
16,0 DIA.
[0.630]
0,51
[0.020]
SERIES NAME
3455RC Ceramic Automatic Reset Thermostat
SERIES NAME
3455R Phenolic Automatic Reset Thermostat
34
www.honeywell.com/sensing
THERMOSTATS - PRECISION
3450CM/3455RM Series Ceramic and
Phenolic Manual Reset Thermostats
3455RBV Series Overmolded Automatic
Reset Thermostats
A temperature-sensitive bimetal disc, electrically isolated from the switch,
actuates the normally closed contacts. The contacts open when the
surface or ambient temperatures increase to the operating snap point of
the calibrated disc. The circuit will stay open above room ambient
temperature until the manual reset button is pressed. Response to
temperature changes is extremely rapid due to the inherently low mass
of the disc and the small size of the product.
A temperature-sensitive bimetal disc, electrically isolated from the switch,
actuates the normally closed contacts. The contacts open when the
surface or ambient temperatures increase to the operating snap point of
the calibrated disc. Response to temperature changes is extremely rapid
due to the inherently low mass of the disc and the small size of the
product.
Reset type:
Amperage capacity:
Automatic
15 A resistive max.
Reset type:
Manual
Amperage capacity:
Housing material:
Operating temperature range:
15 A resistive max.
Housing material:
Operating temperature range:
Environmental exposure range:
Ceramic or phenolic, epoxy overmold
°
°
°
°
Ceramic or phenolic
-12 C to 105 C [10 F to 221 F]
°
°
°
°
°
°
°
°
52 C to 232 C [125 F to 450 F] (ceramic)
-18 C to 121 C [0 F to 250 F]
°
°
°
°
52 C to 150 C [125 F to 302 F] (phenolic)
°
°
°
°
Environmental exposure range: 10 C to 260 C [50 F to 500 F] (ceramic)
°
°
°
°
10 C to 177 C [50 F to 350 F] (phenolic)
AS REQUIRED
3450CM
WIRE GAGE AND
INSULATION AS
REQUIRED
AS REQUIRED
1,04 [0.041] MAX TRAVEL OF
RESET BUTTON
ON CONTACT OPENING
15,98
[0.629]
14,48
18,54
[0.730]
12,90 [0.570]
[0.508]
14,43 DIA.
[0.568]
9,55
9,04
[0.376]
[0.356]
16,0 DIA.
[0.630]
0,51
[0.020]
17,27 DIA.
[0.680]
0,51
[0.020]
SERIES NAME
3455RBV Overmolded Automatic Reset Thermostat
SERIES NAME
3450CM Ceramic Manual Reset Thermostat
3455RM
1,04 [0.041] MAX TRAVEL
OF RESET BUTTON ON
CONTACT OPENING
2,77 DIA. RESET
[0.109] BUTTON
15,88 ON CONTACT
[0.625] CLOSING
14,43 DIA.
[0.568]
11,91
[0.469]
16,0 DIA.
[0.630]
0,51
[0.020]
SERIES NAME
3455RM Phenolic Manual Reset Thermostat
35
www.honeywell.com/sensing
THERMOSTATS - PRECISION
3455R
3450R/3450RC/3450RCH/3455R/3455RC
Series “One-shot” ½ in Thermostats
14,43 DIA.
[0.568]
11,91
[0.469]
Products are designed for high limit applications where automatic reset is
not desired.
Reset type:
None
Amperage capacity:
Housing material:
Operating temperature range:
15 A resistive max.
16,0 DIA.
[0.630]
0,51
[0.020]
Ceramic or phenolic
°
°
°
°
52 C to 260 C [125 F to 500 F] (ceramic)
°
°
°
°
52 C to 150 C [125 F to 302 F] (phenolic)
°
°
°
°
Environmental exposure range:
18 C to 316 C [0 F to 600 F] (ceramic)
SERIES NAME
°
°
°
18 C to 177 °C [0 F to 350 F] (phenolic)
3455R Phenolic “One-shot” ½ in Thermostat
3455RC
3450R
14,43 DIA.
[0.568]
9,63
[0.379]
14,43 DIA.
[0.568]
11,91
[0.469]
16,0 DIA.
[0.630]
0,51
[0.020]
16,0 DIA.
[0.630]
0,51
[0.020]
SERIES NAME
3450R Phenolic “One-shot” ½ in Thermostat
SERIES NAME
3455RC Ceramic “One-shot” ½ in Thermostat
3450RC
16,00
[0.379]
9,63
[0.379]
0,51
[0.020]
SERIES NAME
3450RC Ceramic “One-shot” ½ in Thermostat
3450RCH
2,36 [0.093] DIA.
1,57 [0.062] DEEP
14,48
[0.570]
12,90
[0.508]
14,43 DIA.
[0.568]
9,04
[0.356]
16,0 DIA.
[0.630]
ENCLOSED DISK
SERIES NAME
3450RCH Ceramic “One-shot” ½ in Thermostat
36
www.honeywell.com/sensing
HEATERS
Heaters
Heaters are resistive devices that are used in a variety of applications
such as airborne valves, appliances, satellites and medical electronics.
They are available in flat, molded-to-shape, spiral wrap, transparent,
composite and high temperature configurations. Honeywell uses a
variety of materials to manufacture its heaters. These include silicone,
which can easily be vulcanized to metal parts; Kapton, noted for its
thermal stability over a wide temperature range; as well as other flexible
dielectric materials. Heaters are available with single, multiple or variable
watt densities to customize heat output to unique application needs. They
may also be bonded to other system parts or combined with Honeywell
thermostats, thermistors, thermocouples, temperature sensors and
thermal fuses to form custom-engineered heating systems. Optional PSA
(Pressure Sensitive Adhesive) is available with all series.
NOTE: The products in this section do not follow the “how to use this
catalogue” instructions provided in the catalogue introduction. Specific
reference numbers are not given due to their custom nature. Please
contact your local Honeywell sales office for ordering information.
3200 Series Silicone Chemically-etched
Heaters
The 3200 Series contains resistive foil traces encased between two layers
of fiberglass-supported silicone rubber. All bonding adhesives are
uncured silicone rubber. These heaters are cured under pressure and
temperature during their manufacturing. They are the optimal choice for
multiple watt densities or varying trace geometry requirements.
3100 Series Silicone Wire-wound Heaters
The 3100 Series contains resistive wire encased between two layers of
fiberglass-supported silicone rubber. All bonding adhesives are uncured
silicone rubber. These heaters are cured under pressure and
temperature during manufacturing. The multi-stranded resistance wires
allow wire-wound heaters to conform to three dimensional shapes.
Optional PSA (Pressure Sensitive Adhesive) is available with all series.
Maximum power:
Operating/storage temperature range:
40 W/in2
250 °C [482 °F] max.
200 °C [392 °F] max. (UL)
Maximum power:
Operating/storage temperature range:
40 W/in2
250 °C [482°F] max.
200 °C [392 °F] max. (UL)
Size constraints:
Geometry:
Heater trace pattern:
None, virtually any size and shape
Specific to customer requirements
Specific to customer requirements
Size constraints:
Geometry:
Heater trace pattern:
0,61 m x 0,61 m [24 in x 24 in]
Specific to customer requirements
Specific to customer requirements
WHITE WIRE 2 PLACES
WHITE WIRE 2 PLACES
25,4
[1.00]
44,6
[1.76]
152,4
[6.00]
609,6 ±12,7
[24.0 ±0.50]
25,4
[1.00]
609,6 ±12,7
[24.0 ±0.50]
PATCH (SILICONE)
LEADWIRES
SILICONE
ELEMENT
PATCH (SILICONE)
SILICONE
ELEMENT
SILICONE
HEATER SIDE VIEW
(EXPLODED)
SILICONE
LEADWIRES
HEATER SIDE VIEW
(EXPLODED)
SERIES NAME
3100 Silicone Wire-wound Heater
SERIES NAME
3200 Silicone Chemically-etched Heater
37
www.honeywell.com/sensing
HEATERS
3400 Series Kapton or High Temperature
Insulated Heaters
The 3400 Series contains etched, resistive foil encased between two
layers of Kapton. The Kapton Insulated Heaters use an acrylic thermoset
bonding adhesive, while the Kapton Insulated High Temperature Heaters
use a Teflon™ bonding adhesive. Insulated heaters are used in
applications where thin profile and or low material outgassing are
important considerations.
78000 Series Transparent Heaters
The 78000 Series heater resistive element consists of a very thin layer of
ITO (Indium Tin Oxide) electrically sputtered on PET polyester film. The
electrical connection is made via silver ink or carbon bus bars laid on top
of the ITO. Wire connections are made via ring terminals eyeleted to the
silver or carbon bus bars or flexible tail/connector. Transparent heaters
are used to warm liquid crystal displays (LCDs) in cold, moist
environments.
5 W/in2
-40 °C to 85 °C [-40 °F to 185 °F]
0,60 m x 0,43 m [22 in x 17 in]
Maximum power:
Operating/storage temp. range:
40 W/in2
• Kapton insulated: 177 °C [350 °F] max.
• Kapton high temperature insulated:
260 °C [500 °F] max.
Maximum power:
Operating/storage temp. range:
Size constraints:
Geometry:
Specific to customer requirements within size constraints
Size constraints:
0,61 m x 0,61 m [24 in x 24 in]
Heater trace pattern: Continuous layer of ITO (Indium Tin Oxide) evenly
Geometry:
Specific to customer requirements within size constraints
sputtered across entire surface
Heater trace pattern:
Specific to customer requirements
508,0 ±12,7
[20.00 ±0.50]
6,35
[0.25]
170,2
18,15
[6.70]
[0.714]
257,3
[10.13]
609,0 ±25,4
[24.0 ±1.0]
18,15
[0.714]
159,0 CLEAR
[6.26] VIEW
AREA
ADHESIVE
154,4
[6.08]
THIS SURFACE
SHRINK SLEEVE
INSULATION
2 PLACES
14,95
[0.59]
212,09 CLEAR VIEW AREA
[8.35]
ADHESIVE PATCH
POLYIMIDE
14,95
[0.59]
ELEMENT
220,98
[8.70]
POLYIMIDE
ADHESIVE SIDE
SERIES NAME
SERIES NAME
3400 Kapton or High Temperature Insulated Heater
78000 Transparent Heater
38
www.honeywell.com/sensing
COMBI-SENSOR
Combi-sensor
The Combi-sensor is a liquid pressure/temperature sensor that uses
piezoresistive and thermistor sensing technology to measure water
pressure and temperature. It is designed for use in boiler system water
pressure and inflow temperature measurement applications.
Pressure range:
Accuracy:
0 bar to 3.0 bar relative
±2 % over full range
<3 s
Response time:
Operating temperature:
Overpressure:
Burst pressure:
Power supply:
5 °C to 110 °C [41 °F to 203 °F]
5 bar for 1 hour
9 bar for 1 min
5 Vdc ±10 %
Voltage output:
0.5 Vdc to 4.5 Vdc ratiometric to Vs
Maximum current limit: 250 mA (not self-limiting) (for reverse polarity)
NTC (Negative Temperature Coefficient) characteristics: 10 kOhm
at 25 °C ±3 % beta(25/85) = 3998 K ±2 %
Connection:
Lumberg rast 2.5 edge connector ESL code 312-600
DESCRIPTION
REFERENCE
Combi-sensor
FS300-100
39,0
[1.54]
17,0
[0.67]
41,5
[1.66]
39,0 DIA.
[1.54]
39
www.honeywell.com/sensing
THERMAL CUTOFFS
Thermal Cutoffs
Thermal Cutoffs include products for use in a wide array of small
appliances, major appliances, office copy machines, automotive, and
HVAC equipment. These devices are available in various lead lengths and
configurations.
NOTE: The products in this section do not follow the “how to use this
catalogue” instructions provided in the catalogue introduction. Specific
reference numbers are not given due to their custom nature. Please
contact your local Honeywell sales office for ordering information.
NOTICE
•
To maximize product life, use a 30 °C [86 °F] min. differential
between the operating ambient temperature at the fuse location
and the specified functioning temperature of the fuse being used.
Maintain a 40 °C [104 °F] min. differential between devices with
functioning temperatures above 200 °C [392 °F].
•
Under no condition should the thermal cutoff be exposed to a
continuous normal temperature rating in excess of 200 °C
[392 °F]. Only proper testing of the above will determine the
selected thermal cutoff’s suitability within the application.
D Series
DXXX-002
81,79
The D Series responds to temperature by interrupting an electrical circuit
when the operating and/or environmental temperature exceeds the
thermal rating of the fuse. This is accomplished when the organic pellet
experiences a phase change, allowing the spring activated contacts to
permanently open the circuit.
[3.220]
35,05
[1.380]
46,74
[1.840]
11,61 REF.
[0.457]
SILVER-PLATED
BRASS CASE
Operating temperature range:
Environmental exposure range:
72 °C to 240 °C [162 °F to 464 °F]
see notice
TIN-PLATED
18 AWG 1,02 [0.040]
COPPER WIRE
3,99
[0.157]
SILVER-PLATED
18 AWG 1,02 [0.040]
COPPER WIRE
DXXX-001
NAME
DXXX-002
64,26
[2.530]
DXXX-003
29,21
[1.150 ]
35,05
[1.380 ]
69,09
[2.720]
34,04
[1.340]
35,05
[1.380]
11,61 REF.
[0.457]
SILVER-PLATED
BRASS CASE
11,61 REF.
[0.457]
SILVER-PLATED
BRASS CASE
3,99
[0.157]
TIN-PLATED
18 AWG 1,02 [0.040]
COPPER WIRE
TIN-PLATED
18 AWG 1,02 [0.040]
COPPER WIRE
3,99
[0.157]
SILVER-PLATED
18 AWG 1,02 [0.040]
COPPER WIRE
SILVER-PLATED
18 AWG 1,02 [0.040]
COPPER WIRE
NAME
NAME
DXXX-001
DXXX-003
40
www.honeywell.com/sensing
THERMAL CUTOFFS
RD Series
The RD Series responds to temperature by interrupting an electrical
circuit when the operating and/or environmental temperature exceeds
the thermal rating of the fuse. This is accomplished when the organic
pellet experiences a phase change, allowing the spring activated
contacts to permanently open the circuit.
The electrical resistance of an RD Series thermal cutoff is comparable to
that found in an equal length of 18 gauge solid copper wire. With
proper heat flow, heat generation below 15 A is minimal. Above 15 A,
the upper limit on current capacity will depend on the environment for
each specification
Operating temperature range:
Envirnmental exposure range:
72 °C to 240 °C [162 °F to 464 °F]
see notice
RDXXX-001
NAME
RDXXX-001
RDXXX-002
NAME
RDXXX-002
41
www.honeywell.com/sensing
POSITION SENSORS
POSITION
Honeywell’s Solid State Position Sensor family includes digital and analog Hall-effect position
Position Sensors
sensors, magnetoresistive digital sensors, Hall-effect vane sensors, gear tooth sensors, Hall-effect
basic switches, and magnets. Solid State Position Sensors are reliable, high speed, long life,
sensors and are directly compatible with other electronic circuits.
Position sensors are used in applications which require accurate, reliable outputs. They are found in
brushless dc motors, utility meters, welding equipment, vending machines, home appliances,
computers, etc.
Unipolar - temperature
compensated
SS40/400 Series
Hall effect digital
position sensor
SS400 Series position sensors have a thermally
balanced integrated circuit over full temperature
range. The negative compensation slope is
optimized to match the negative temperature
coefficient of lower cost magnets. Bipolar, latching
and unipolar magnetics are available.
SS49/490 Series
Ratiometric hall effect
linear position sensor
Package style:
OPERATING POINT
(MAXIMUM)
115 Gauss
RELEASE POINT
(MINIMUM)
20 Gauss
REFERENCE
SS441A
SS443A
SS449A
180 Gauss
75 Gauss
Radial lead IC
390 Gauss
235 Gauss
Supply voltage:
Operating temperature:
4.5 to 10.5 Vdc
-40 °C to 150 °C
-40 °F to 302 °F
-670 to 670 Gauss
Bipolar latching- temperature
compensated
Magnetic range:
OPERATING POINT
(MAXIMUM)
85 Gauss
RELEASE POINT
(MINIMUM)
-85 Gauss
REFERENCE
OPTIONS
Band gap regulation provides extremely stable
operation over 3.8 Vdc to 30 Vdc supply voltage
range.
SS461A
SS466A
180 Gauss
-180 Gauss
Temperature compensated
Gate
Package style:
Supply voltage:
Operating temperature:
Radial lead IC
3.8 Vdc to 30 Vdc
-40 °C to 150 °C
-40 °F to 302 °F
3˚ (2)
2X 3˚
2X 48˚
2,54
0.10
4,06
0.16
48˚ (2)
2,5
1,75
0.07
1
0.10
3,0
1.12
4,1
0.16
15,0
0.59
Hall element
centre
3,0
0.12
+
0,76
0.03
-
0
3 x
MAX
0,7
0.025
3 x
MAX
1,7
0.07
14,99
0.59
0,4
0.015
3 x
0
1,3
0.05
2 x
0,43
(3)
+
0.017
_
0,38
(3)
0.015
1,3
(2)
0.05
3,2
0.125
OPTIONS
+
-
0
MAXIMUM Operating Point and MINIMUM
Release Point are specified @ 25 °C
PACKAGE STYLE
REFERENCE
SS495A
Bipolar - temperature compensated
High accuracy
High accuracy Surface mount
Surface mount reel
SS495A1
SS495A1-S
SS495A-SP
OPERATING POINT
(MAXIMUM)
60 Gauss
RELEASE POINT
(MINIMUM)
-60 Gauss
REFERENCE
SS411A
SS413A
140 Gauss
-140 Gauss
Bipolar - non temperature
compensated
Supply voltage:
4.5 to 24 Vdc
Operating temperature:
-55 °C to 150 °C
-67 °F to 302 °F
OPERATING POINT
(MAXIMUM)
RELEASE POINT
(MINIMUM)
REFERENCE
150 Gauss
-140 Gauss
SS41
42
www.honeywell.com/sensing
POSITION SENSORS
POSITION
SS49/490 Series
Ratiometric hall effect
linear position sensor
(Continued)
SS500 Series
Hall effect digital
position sensor
Package style:
Supply voltage:
Operating temperature:
SS94 Series
Ratiometric hall effect
linear position sensor
The SS9 utilizes a Hall effect integrated circuit chip
which provides increased temperature stability
and performance. Laser trimmed thick film
resistors on the ceramic substrate and thin film
resistors on the integrated circuit reduce null and
gain shifts over temperature which results in
consistent sensitivity from one device to the next.
Surface mount
3.8 to 30 Vdc
-40 °C to 150 °C
-40 °F to 302 °F
Non temperature compensated
GATE
2 X 3˚ ± 2˚
2 X 48˚ ± 2˚
NOMINAL
PACKAGE
HALL ELEMENT
(
(
Package style:
Supply voltage:
Operating temperature:
Ceramic
6.6 Vdc to 12.6 Vdc
-40 °C to 125 °C
2,54
0.10
.067
4,1
0.16
.005 MAX FLASH
-40 °F to 257 °F
-500 to 500 Gauss
-100 to 100 Gauss
CATALOG
LISTING
Magnetic range:
SS94A1F
3,0
0.12
.164 ± .003
DATE CODE
2,03
0.08
MAX
1,75
0.07
( - )
( + )
(0)
6
.005 MAX
3X .016
(0)
0,43
0.017
3 x
3 x
+
2X .059 ± .002
_
0,38
0.015
.173
1,27
0.05
2 x
3
3,17
0.125
N
S
+
-
0
Supply voltage:
Operating temperature:
4 to 10 Vdc
-25 °C to 85 °C
-13 °F to 185 °F
.177 ± .004
Magnetic range:
-1000 to 1000 Gauss
OPTIONS
REFERENCE
SS49
MAXIMUM Operating Point and MINIMUM
Release Point are specified @ 25 °C
Miniature Ratiometric hall effect
linear position sensor
SS490 Series MRL (Miniature Ratiometric Linear)
sensors have a ratiometric output voltage, set by
the supply voltage. It varies in proportion to the
strength of the magnetic field.
Bipolar - temperature compensated
OPTIONS
OPERATING POINT
(MAXIMUM)
60 Gauss
RELEASE POINT
(MINIMUM)
-60 Gauss
REFERENCE
Temperature compensated
SS511AT
SS513AT
140 Gauss
-140 Gauss
MAIN FEATURE
General purpose
REFERENCE
SS94A1
High sensitivity (25 mV/Gauss output @ 8 Vdc supply) SS94A1F
Noise shielded SS94A2
Bipolar - non temperature
compensated
Supply voltage:
Temperature compensated
Gate
2X 3˚
4,5 to 24 Vdc
REFERENCE
SS51T
2X 48˚
OPERATING POINT
(MAXIMUM)
RELEASE POINT
(MINIMUM)
2,54
0.10
140 Gauss
-140 Gauss
4,06
0.16
1,75
1
Unipolar - temperature
compensated
0.07
3,0
1.12
15,0
0.59
OPERATING POINT
(MAXIMUM)
115 Gauss
180 Gauss
390 Gauss
RELEASE POINT
(MINIMUM)
20 Gauss
75 Gauss
235 Gauss
REFERENCE
0,76
+
-
0
3 x
MAX
SS541AT
SS543AT
SS549AT
0.03
0,7
0.025
3 x
3 x
MAX
0,4
0.015
1,3
2 x
0.05
Bipolar latching- temperature
compensated
3,2
0.125
OPERATING POINT
(MAXIMUM)
85 Gauss
RELEASE POINT
(MINIMUM)
-85 Gauss
REFERENCE
+
-
0
SS561AT
SS566AT
180 Gauss
-180 Gauss
MAGNETIC RANGE
-670 to 670 Gauss
-840 to 840 Gauss
REFERENCE
SS495B
SS496B
43
www.honeywell.com/sensing
POSITION
POSITION SENSORS
2SS Series
SR13 Series
SR16 Series
Magnetoresistive digital
position sensor
Hall effect digital position
sensor
Cost effective
digital vane sensor
2SS Series position sensors have
SR13 series Hall-effect digital position sensors
permit quick and easy sensor installation, with
snap-in and flat mount sensor packages, and can
house any of the present SS400 series sensors or
any similarly sized sensing elements.
SR16 series competitively priced Hall-effect digital
vane sensors contain an internal magnet and Hall
effect sensor mounted in a twin tower
configuration.
magnetoresistive material integrated on silicon
and encapsulated in a plastic package. The
integrated circuit provides a digital output in
response to very low magnetic fields. Though this
signal is identical to our digital Hall effect sensors,
it can be achieved by magnetoresistive sensors at
much greater sensor-to-magnet distances.
Package style:
Supply voltage:
Operating temperature:
Dual tower
3.8 Vdc to 30 Vdc
-20 °C to 85 °C
-4 °F to 185 °F
Package style:
Plastic snap-in
3.8 Vdc to 30 Vdc
-40 °C to 150 °C
-40 °F to 302 °F
Supply voltage:
Operating temperature:
Supply voltage:
Operating temperature:
3.8 Vdc to 30 Vdc
-40 °C to 150 °C
-40 °F to 302 °F
25 Gauss
OPTIONS
Type J4
Maximum operating point:
Minimum release point:
5 Gauss
2x
5˚ MAX
2x 45
˚
1,6
3,1
0.12
0.06
4,5
0.18
IC CENTER
Type J6
3,1
0.12
2SS
4,5
0.18
OPTIONS
15,0
0.59
MAXIMUM Operating Point and MINIMUM
Release Point are specified @ 25 °C
- O +
Unipolar
OPERATING POINT
(MAXIMUM)
180 Gauss
115 Gauss
390 Gauss
RELEASE POINT
(MINIMUM)
75 Gauss
20 Gauss
235 Gauss
REFERENCE
SR13C-A1
SR13D-A1
SR13F-A1
OPTIONS
Omnipolar
Bipolar latching
PACKAGE STYLE
Radial lead IC
Surface Mount
REFERENCE
2SS52M
2SS52M-S
OPERATING POINT
(MAXIMUM)
RELEASE POINT
(MINIMUM)
REFERENCE
Type N
85 Gauss
-85 Gauss
SR13R-A1
PACKAGE STYLE
PCB/Molex 5557 connector
Wire exit
REFERENCE
SR16C-J4
SR16C-J6
SR16C-N
PCB mount leads
44
www.honeywell.com/sensing
POSITION SENSORS
POSITION
SR17 Series
Cost effective
digital vane sensor
SR17 series competitively priced Hall-effect digital vane sensors are designed for position and speed
sensing and are offered in a side-mount twin tower package.
Package style:
Side looker mounting
Supply voltage:
Operating temperature:
3.8 Vdc to 30 Vdc
-20 °C to 85 °C
-4 °F to 185 °F
OPTIONS
Type J6
Type J7
PACKAGE STYLE
Side mount wire exit
41 in wire leads and connector
REFERENCE
SR17C-J6
SR17C-J7
45
www.honeywell.com/sensing
INFRARED
INFRARED
Optoelectronics is the integration of optical principles and semi-conductor electronics. Optoelectronic
Infrared
Products
components are reliable, cost effective sensors. Standard infrared emitting diodes (IREDs), sensors and
assemblies are covered.
Infrared sensors are used for presence sensing, motion sensing, position encoding, limit sensing, movement
detection and counting.
Plastic package
Infrared emitting diodes
T1, end-emitting - SEP8505/8705
OPTIONS
Metal package, end-emitting
Coaxial, lead case - SE1450/1470(L)
Side-emitting - SEP8506/8706
Miniature pill - SE2460/2470
Side-emitting - SEP8736
TO-46, flat window - SE3455/3470
Operating temperature:
-40 °C to 85 °C (-40 °F to 185 °F)
OUTPUT WAVELENGTH (nm)
BEAM ANGLE (°)
POWER OUTPUT
REFERENCE
935
935
880
880
15
50
15
10
2.0 to 4.0 mW/cm²
0.33 to 0.52 mW/cm² SEP8506-002
2.7 to 7.8 mW/cm²
1.7 to 3.0 mW/cm²
SEP8505-003
SEP8705-003
SEP8736-003
TO-46, dome lensed - SE5455/5470
Ceramic discrete surface mount - glass lens
Operating temperature:
-55 °C to 125 °C (-67 °F to 257 °F)
OUTPUT WAVELENGTH (nm)
BEAM ANGLE (°)
POWER OUTPUT
REFERENCE
935
880
935
880
935
880
935
880
24
24
18
18
90
90
20
20
0.70 mW min.
1.10 to 4.50 mW/cm² SE1470-003L
SE1450-003L
Note:
1.00 mW min.
6.0 mW/sr min.
5.4 mW min.
10.5 mW min.
4.8 mW min.
SE2460-003
SE2470-002
SE3455-004
SE3470-003
SE5455-003
SE5470-004
This device can be mounted with the lens up or down, looking through PCB.
Operating temperature:
-55 °C to 125 °C (-67 °F to 257 °F)
OUTPUT WAVELENGTH (NM)
880
BEAM ANGLE (°)
24
POWER OUTPUT
REFERENCE
3.5 mW/cm² min.
0.60 mW/cm² min.
SME2470-021
46
www.honeywell.com/sensing
INFRARED
INFRARED
Phototransistors
OPTIONS
Metal package
Plastic package
Coaxial, lead case - SD1440(L)
T1, end-looking - SDP8405
Side-looking- SDP8406
Miniature pill - SD2440
TO-46, flat window - SD3443
Side-looking - SDP8436
TO-46, dome lensed - SD5443
Operating temperature:
-40 °C to 85 °C (-40 °F to 185 °F)
ANGULAR RESPONSE (°)
LIGHT CURRENT MINUMUM (mA)
REFERENCE
SDP8405-003
SDP8406-002
SDP8436-003
20
50
18
12.0
1.80
7.0
Ceramic discrete surface mount - glass lens
Top-looking - SMD2420/2440
Operating temperature:
-55 °C to 125 °C (-67 °F to 257 °F)
ANGULAR RESPONSE (°)
LIGHT CURRENT MINUMUM (mA)
REFERENCE
SD1440-003L
SD2440-004
SD3443-003
SD5443-003
24
48
90
18
3.0
7.0
2.0
8.0
Note:
This device can be mounted with the lens up or down, looking through PCB.
Operating temperature:
-55 °C to 125 °C (-67 °F to 257 °F)
ANGULAR RESPONSE (°)
28
LIGHT CURRENT MINUMUM (mA)
3.0
REFERENCE
SMD2440-012
47
www.honeywell.com/sensing
INFRARED
INFRARED
Optoschmitt detectors
Encoder sensors
Operating temperature:
Turn-on threshold irradiance:
Supply voltage:
-40 °C to 85 °C (-40 °F to 185 °F)
0.05 mW/cm² to 2.0 mW/cm²
4.5 Vdc to 5.5 Vdc
OPTIONS
Package style:
Plastic, PC mount
Metal package
TO-46, dome lensed
OPTIONS
Side-looking - HLC2705
Operating temperature:
Supply voltage:
Output:
-40 °C to 100 °C (-40 °F to 212 °F)
16.0 V
10 kOhm Pull-up
12°
Angular response:
PC mount - HOA0901/0902
OUTPUT LOGIC
Buffer
Inverter
Buffer
Inverter
TURN-ON THRESHOLD IRRADIANCE
REFERENCE
SD5600-001
SD5610-001
SD5620-001
SD5630-001
2.5 mW/cm² max.
2.5 mW/cm² max.
0.25 mW/cm²
0.25 mW/cm²
Plastic package
Side-looking
OUTPUT OPTION
Speed and direction
Direction, inverting logic
Speed and direction, 2 tachometer
REFERENCE
HLC2705-001
HOA0901-011
HOA0902-011
Operating temperature:
Supply voltage:
Output:
-40 °C to 85 °C (-40 °F to 185 °F)
16.0 V
10 kOhm Pull-up
50°
Angular response:
OUTPUT LOGIC
TURN-ON THRESHOLD IRRADIANCE
REFERENCE
Buffer
2.5 mW/cm² max.
SDP8600-001
NOTICE
Housings are soluble in chlorinated hydrocarbons and
ketones. Recommended cleaning agents are methanol and
isopropanol.
48
www.honeywell.com/sensing
INFRARED
INFRARED
Reflective sensors
OPTIONS
HOA Series
Metal components
Converging/focused optical axis - HOA0149
Converging/focused optical axis - HOA1180
Converging/focused optical axis - HOA2498
HOA1397
Operating temperature:
Output:
-55 °C to 100 °C (-67 °F to 212 °F)
Transistor
ON-STATE COLLECTOR CURRENT
REFERENCE
0.16 mA
0.16 mA
HOA1180-002
HOA2498-002
Converging/focused optical axis - HOA1405
Plastic package
HLC1395 Series, short distance detection
Operating temperature:
Output:
-40 °C to 85 °C (-40 °F to 185 °F)
Transistor
ON-STATE COLLECTOR CURRENT
REFERENCE
0.60 mA
1.00 mA
0.70 mA
0.80 mA
HLC1395-002
HOA0149-001
HOA1397-002
HOA1405-002
Low profile
NOTICE
Housings are soluble in chlorinated hydrocarbons and
ketones. Recommended cleaning agents are methanol and
isopropanol.
49
www.honeywell.com/sensing
INFRARED
INFRARED
HOA1882
Aperture (emitter and detector):
Transmissive sensors,
Phototransistor output
Ø 1,52 mm (0.060 in)
OPTIONS
Metal components
HOA1877
Aperture (emitter and detector):
Ø 1,27 mm (0.050 in)
Plastic components, wire leads
HOA088X/089X
Wire colour code and functions
Red - IRED Anode
Black - IRED Cathode
White - Detector Collector
Green - Detector Emitter
Operating temperature:
Output:
-55 °C to 100 °C (-67 °F to 212 °F)
Transistor
ON-STATE COLLECTOR CURRENT
REFERENCE
0.1 mA
HOA1877-001
Plastic components
HOA086X/087X
HOA1870
Wire colour code and functions:
Orange - IRED Anode
Green - IRED Cathode
White - Detector Collector
Blue - Detector Emitter
0,15 mm (0.006 in) wide
Aperture (emitter and detector):
HOA1879
Operating temperature:
Output:
-40 °C to 85 °C (-40 °F to 185 °F)
Transistor
ON-STATE COLLECTOR CURRENT
REFERENCE
1.00 mA
HOA0866-T55
HOA0870-N51
HOA0880-P51
HOA0890-L55
HOA1870-031
HOA1879-015
HOA1882-012
NOTICE
Opaque housing
Opaque housing
0.50 mA
0.50 mA
0.50 mA
0.30 mA
0.50 mA
1.80 mA
Housings are soluble in chlorinated hydrocarbons and
ketones. Recommended cleaning agents are methanol and
isopropanol.
50
www.honeywell.com/sensing
INFRARED
INFRARED
Transmissive sensors,
Optoschmitt output
OPTIONS
Plastic components, integral 3 pin connector
Plastic components
HOA7720/30
HOA096X/097X
HOA696X/697X
Operating temperature:
-40 °C to 70 °C (-40 °F to 158 °F)
OUTPUT
OUTPUT LOGIC HYSTERESIS REFERENCE
10 kOhm Pull-up
10 kOhm Pull-up
Open-Collector
Totem-Pole
Open-Collector
Totem-Pole
Buffer
Buffer
Inverter
Inverter
Buffer
Buffer
Inverter
Inverter
10 %
10 %
5 %
5 %
5 %
5 %
5 %
5 %
HOA0961-N51
HOA0971-N51
HOA6963-N51
HOA6972-N55
HOA6981-L51
HOA6990-T51
HOA7720-M22
HOA7730-M22
Opaque housing
Opaque housing
Opaque housing
Totem-Pole
Open-Collector
Plastic components, wire leads
HOA698X/699X
Wire colour code and functions:
Red - IRED Anode
Black - IRED Cathode
White - Detector Vcc
Blue - Detector Output
Green - Detector Ground
NOTICE
Housings are soluble in chlorinated hydrocarbons and
ketones. Recommended cleaning agents are methanol and
isopropanol.
51
www.honeywell.com/sensing
CURRENT
CURRENT
Current sensors monitor ac or dc current. Included are adjustable linear, null balance, digital, and linear current
sensors.
Current
Sensors
Digital current sensors can sound an alarm, start a motor, open a valve or shut down a pump. The linear signal
duplicates the waveform of the current being sensed, and can be used as a feedback element to control a motor or
regulate the amount of work being done by a machine.
OPTIONS
CSN Series
Closed Loop Current Sensors
Multi turn PCB mounted
Housing material:
Mounting:
Bayblend KU2-1468 (UL94-V0)
PCB on 13 pins
SENSED CURRENT RANGE COIL TURNS
SUPPLY VOLTAGE
REFERENCE
± 36 A
1000 (110 Ohm coil)
± 15 Vdc
CSNE151
DIRECTION
OF CURRENT
12,7 (0.50)
I +
31,8 (1.25)
Closed loop current sensors measure ac, dc and impulse currents over 0-25,
0-50, 0-100, 0-600 and 0-1200 Amp ranges. The CSN series is based on the
Hall effect principle and the null balance or zero magnetic flux method
(feedback system). The magnetic flux in the sensor core is constantly
controlled at zero. The amount of current required to balance zero flux is the
measure of the primary current flowing through the conductor, multiplied by
the ratio of the primary to secondary windings. This closed loop current is the
output from the device and presents an image of the primary current reduced
by the number of secondary turns at any time. This current can be expressed
as a voltage by passing it through a resistor.
4,0 (0.16)
20,3 (0.80)
-
+ 0
Ø 0,80 (0.03)
Secondary pin)
PIN 1
Ø 1,25 (0.05)
(Primary pin)
DIRECTION
OF CURRENT
I +
PIN 1
2,54 (0.100)
1,60 (0.06)
7,7 (0.27)
The CSN Series has a high overload capacity, a high level of electrical
insulation between primary and secondary circuits and a rapid response rate.
Lightweight and compact, and with no restriction on input current waveform,
the sensors are ideal for variable speed drives, power supplies, feedback
control systems, robotics/welding equipment and general overcurrent
protection.
2,9 (0.114)
7,75 (0.305)
2,54 (0.100)
9,50 (0.37)
Sensed current type:
EMC:
Accuracy:
ac or dc
EN 50082-2, EN 50081-2
± 0.5 %
SENSED
CURRENT RANGE
± 90 A
NOMINAL
CURRENT
25 A
COIL TURNS
SUPPLY VOLTAGE
REFERENCE
1000 (66 Ohm coil)± 12 Vdc to 15 Vdc
1000 (66 Ohm coil)± 12 Vdc to 15 Vdc
CSNE151-100
CSNE151-200
± 90 A
50 A
52
www.honeywell.com/sensing
CURRENT
CURRENT
Small housed style
Housing material:
Mounting:
Pinout style ‘B’
Bayblend FR 1440 (UL94-V0)
PCB on 3 pins
SENSED CURRENT RANGE COIL TURNS
SUPPLY VOLTAGE
± 12 to ± 15 Vdc
± 12 to ± 15 Vdc
± 12 to ± 15 Vdc
± 12 to ± 15 Vdc
REFERENCE
CSNF161
CSNF151
CSNR151
CSNR161
± 150 A
± 180 A
± 200 A
± 200 A
1000 (30 Ohm coil)
SENSED CURRENT RANGE COIL TURNS
SUPPLY VOLTAGE
REFERENCE
CSNA111
CSNC241-500
CSNB121
2000 (100 Ohm coil)
2000 (100 Ohm coil)
1000 (30 Ohm coil)
± 70 A
± 90 A
± 100 A
± 100 A
1000 (90 Ohm coil)
± 15 Vdc
± 13 Vdc
± 15 Vdc
± 15 Vdc
1000 (50 Ohm coil)
2000 (160 Ohm coil)
2000 (130 Ohm coil)
CSNB131
Small housed family
Housing material:
Mounting:
Bayblend KU2-1468 (UL94-V0)
PCB on 3 pins
Pinout style ‘A’
SENSED CURRENT RANGE COIL TURNS
SUPPLY VOLTAGE
± 12 to ± 15 Vdc
± 12 to ± 15 Vdc
± 12 to ± 15 Vdc
REFERENCE
CSNF161-002
CSNR151-002
CSNR161-002
± 150 A
± 200 A
± 200 A
1000 (30 Ohm coil)
2000 (100 Ohm coil)
1000 (30 Ohm coil)
SENSED CURRENT RANGE COIL TURNS
SUPPLY VOLTAGE
REFERENCE
CSNP661
CSNT651
CSNG251
± 90 A
1000 (30 Ohm coil)
± 12 to ± 15 Vdc
± 12 to ± 15 Vdc
± 15 Vdc
± 150 A
± 180 A
2000 (100 Ohm coil)
2000 (100 Ohm coil)
SENSED CURRENT RANGE COIL TURNS
SUPPLY VOLTAGE
± 12 to ± 15 Vdc
± 12 to ± 15 Vdc
REFERENCE
CSNP661-002
CSNT651-001
± 90 A
1000 (30 Ohm coil)
2000 (100 Ohm coil)
± 150 A
53
www.honeywell.com/sensing
CURRENT
CURRENT
CSN Series
CSLA Series
Closed Loop Current Sensors (Continued)
Open Loop Current Sensors
Mid range housed style
Housing material:
Mounting:
Bayblend KU2-1468 (UL94-V0)
Panel, spade terminals x 3
CS series linear current sensors incorporate our 91SS12-2 and SS94A1linear
output Hall effect transducer (LOHET™). These sensors cover measuring
ranges from 0-950 Amps. The sensing element is assembled in a printed
circuit board mountable housing. This housing is available in four
configurations. Normal mounting is with 0.375 inch long 4-40 screw and
square nut (not provided) inserted in the housing or a 6-20 self-tapping
screw. The combination of the sensor, flux collector, and housing comprises
the holder assembly. These sensors are ratiometric.
Sensed current type:
Housing:
ac or dc
PBT Polyester
OPTIONS
PCB bottom mount
SENSED CURRENT RANGE COIL TURNS
SUPPLY VOLTAGE
± 12 to ± 18 Vdc
± 12 to ± 18 Vdc
REFERENCE
CSNJ481
CSNJ481-001
± 600 A
2000 (25 Ohm coil)
± 600 A (fitted with busbar) 2000 (25 Ohm coil)
Large housed style
Housing material:
Mounting:
Bayblend KU2-1468 (UL94-V0)
Panel, spade terminals x 3
SENSED CURRENT RANGE
0 to 75 A
0 to 92 A
0 to 150 A
0 to 225 A
0 to 225 A
0 to 325 A
0 to 400 A
SUPPLY VOLTAGE
8 to 16 Vdc
6 to 12 Vdc
6 to 12 Vdc
8 to 16 Vdc
6 to 12 Vdc
8 to 16 Vdc
6 to 12 Vdc
REFERENCE
CSLA1DE
CSLA2DE
CSLA2DG
CSLA1DJ
CSLA2DJ
CSLA1DK
CSLA2DK
SENSED CURRENT RANGE COIL TURNS
SUPPLY VOLTAGE
± 15 to ± 24 Vdc
± 15 to ± 24 Vdc
REFERENCE
CSNK591
CSNK591-001
± 1200 A
5000 (50 Ohm coil)
± 1200 A (fitted with busbar) 5000 (50 Ohm coil)
54
www.honeywell.com/sensing
CURRENT
CURRENT
PCB bottom mount
PCB side mount
SENSED CURRENT RANGE
SUPPLY VOLTAGE
REFERENCE
± 45 A
4.5 to 10.5 Vdc
CSLH3A45
Digital current sensor
SENSED CURRENT RANGE
0 to 57 A
0 to 72 A
0 to 100 A
0 to 150 A
SUPPLY VOLTAGE
8 to 16 Vdc
6 to 12 Vdc
8 to 16 Vdc
8 to 16 Vdc
REFERENCE
CSLA1CD
CSLA2CD
CSLA1CF
CSLA1CH
PCB bottom mount
SENSED CURRENT RANGE
0 to 310 A
0 to 550 A
0 to 625 A
0 to 765 A
SUPPLY VOLTAGE
6 to 12 Vdc
6 to 12 Vdc
8 to 16 Vdc
6 to 12 Vdc
6 to 12 Vdc
REFERENCE
CSLA2EJ
CSLA2EL
CSLA1EL
CSLA2EM
CSLA2EN
0 to 950 A
PCB side mount
OPERATE CURRENT
SUPPLY VOLTAGE
REFERENCE
3.5 A.t Nominal
6 to 16 Vdc
CSDA1BC
SENSED CURRENT RANGE
0 to 57 A
0 to 72 A
SUPPLY VOLTAGE
8 to 16 Vdc
6 to 12 Vdc
REFERENCE
CSLA1GD
CSLA2GD
55
www.honeywell.com/sensing
LIQUID LEVEL
Honeywell liquid level sensor components incorporate a voltage level switch which provides a digital
output that denotes the presence or absence of liquid.
Liquid Level
Sensors
The mode of operation is derived from the principle of total internal reflection. An LED and detector are
housed within a plastic dome at the head of the device. When no liquid is present, all light from the LED is
totally internally reflected from the dome boundary to the detector. When liquid covers the dome, the
effective refractive index at the dome/liquid boundary changes, allowing some light from the LED to
escape. Thus the amount of light received by the voltage level switch is reduced and the output switches,
denoting the presence of liquid. This method of liquid level sensing is very fast, and instantaneous for
water.
The LL Series is a basic component which requires external circuit protection; this protection is
incorporated in the LLE Series.
Housing:
Polysulphone
250 mm lead wires
+5 Vdc
Termination:
Supply voltage:
Pressure range:
0 to 5 bar
Type 5
LL Series
LLE Series
Operating temperature:
Standard
Operating temperature:
-25 °C to 80 °C
-13 °F to 176 °F
-30 °C to 85 °C
-22 °F to 185 °F
-20 °C to 85 °C
-4 °F to 185 °F
-40 °C to 125 °C
-40 °F to 257 °F
Storage temperature:
High temperature
Vcc
RED
Storage temperature:
Standard
-40 °C to 100 °C
-40 °F to 212 °F
-50 °C to 150 °C
-58 °F to 302 °F
VOLTAGE
REGULATOR
SEAL WASHER
Nitrile rubber
REFERENCE
LL105100
High temperature
High temperature
OUTPUT
GREEN
SCHMITT
TRIGGER
IRED
PHOTO
TRANSISTOR
0 V
BLUE
OPTIONS
Type 2
OPTIONS
Type 2
22,49
(0.89)
19,40
(0.76)
12,45
(0.49)
19,00
(0.75)
4,70
(0.19)
(0.01 in2
)
0,22 mm2
Tinned Ends
SEAL WASHER
Vamac
REFERENCE
LL102101
SEAL WASHER
Nitrile rubber
REFERENCE
LLE102000
High temperature
Type 3
Type 5
+0.004
-0
(0.39
)
+0,10
-0
16,12
(0.63)
Ø10,00
2,3
(0.09)
4,1
(0.16)
(0.01 in2 ) 0,22 mm 2
Tinned Ends
SEAL WASHER
Nitrile rubber
Vamac
REFERENCE
LL103000
LL103101
Standard
High temperature
13,0
(0.51)
SEAL WASHER
Nitrile rubber
REFERENCE
LLE105000
56
www.honeywell.com/sensing
BASIC SWITCHES
BASIC SWITCHES
These listings include standard size basics, miniature, subminiature, switches. The precision snap-
action mechanisms are offered with a wide variety of actuators and operating characteristics. Basic
switches are ideal for applications requiring compactness, light weight, accurate repeatability and
long life.
Basic Switches
They are best used for presence/absence detection where physical contact with object is
permissible. Very economical.
Overtravel plunger - standard
Overtravel plunger (splash resistant)
BA/BE/BZ Series
Basic Switches
BA/BE/BZ Series Standard Basic Switches are
used for simple or precision on/off application
needs.
As well as the catalogue listings presented here,
we offer other versions with higher temperature
ratings, different termination options, different
electrical ratings and Single Pole, Single Throw
(SPST) circuitry. Refer to our website for details.
Voltage:
Electrical rating:
Operating temperature:
250 Vac
16 A
-55 °C to 85 °C
-67 ° F to 185 °F
Screw
ELECTRICAL RATING
REFERENCE
BZ-2RD-A2
BA-2RB-A2
20 A
Termination:
Contact type:
Approvals:
Panel mount overtravel plunger
Silver
CE, CSA, UL
SPDT
REFERENCE
BZ-2RDS-A2
Switching options:
Stainless steel spring
BZ-2RDS-A2S
Single Pole, Double Throw
Overtravel roller plunger
OPTIONS
Note: BA/BE plunger position distance from
mounting hole = 19 mm (0.75 in)
Top pin plunger
ELECTRICAL
RATING
APPROVALS
REFERENCE
BZ-2RQ1-A2
BA-2RQ1-A2
20 A
DEMKO
REFERENCE
BZ-2RQ18-A2
Approvals:
BE-2R-A4
CSA, UL
ELECTRICALRATING
TERMINATION
Solder
REFERENCE
BZ-R
Screw
Solder
Screw
Screw
BZ-R-A2
BZ-R169
BZ-2R-A2
BE-2R-A4
25 A
57
www.honeywell.com/sensing
BASIC SWITCHES
BA/BE/BZ Series
Basic Switches
(Continued)
DT Series Basic Switch
TB Series
Miniature Double-break
Basic Switch
TB Series Miniature Double-break Basic Switches
are basic double-break units that offer a means of
controlling isolated circuits. Each circuit may be
driven by an independent voltage source.
DT Series Standard Basic Switches consist of
two independent single-pole double throw
circuits in one housing actuated by one
actuator. The terminals are separated by a non-
conductive shield to reduce shorting.
Overtravel roller plunger,
perpendicular
Voltage:
Electrical rating:
Operating temperature:
250 Vac
10 A
-55 °C to 85 °C
-67 ° F to 185 °F
Screw
Voltage:
Electrical rating:
Operating temperature:
250 Vac
10 A
-55 °C to 125 °C
-67 ° F to 257 °F
Solder
Termination:
Contact type:
Approvals:
Silver
CSA, UL
Termination:
Contact type:
Approvals:
Switching options:
DPDT
Silver
CSA, UL
Double Pole, Double Throw
Switching options:
(SPDT DB)
Single Pole, Double Throw, Double Break
REFERENCE
BZ-2RQ181-A2
OPTIONS
OPTIONS
Top pin plunger
Top pin plunger
Straight lever
Dimensions in inches
1.825 REF
1.57
0.87 DIA HOLE IN TERMINALS (4)
0.53
0.13
0.50
0.20
0.24
0.15
PLASTIC PLUNGER
0.260
0.22
0.113 ± .002 DIA
0.16 R
0.06 MAX PRETRAVEL
0.101 -+.002
.001
REFERENCE
DT-2R-A7
0.46
OPERATING
POSITION
4
1
3
2
0.312 ± .003
0.50
0.25
0.03
0.09
ELECTRICAL APPROVALS LEVER RADIUS
RATING
REFERENCE
0.365
0.532 ± .003
0.101 -+..000021DIA HOLE
20 A
DEMKO
BA-2RV-A2
BZ-2RW80-A2
No return spring BZ-2RW84-A2
1.25
NOTE-
1 - TERMINALS 1 & 2 NORMALLY CLOSED CIRCUIT
2 - TERMINALS 3 & 4 NORMALLY OPEN CIRCUIT
3 - TERMINALS ARE PLATED FOR SOLDERING
Basic Switch Accessories
A range of accessories is available for BA, BE, BZ
and DT switches, such as the 5PA2 terminal
enclosure. For more information please contact
your local sales office.
152,4 mm
BZ-2RW863-A2
Roller lever
REFERENCE
1TB1-2
TERMINATION LEVER
RADIUS
REFERENCE
BZ-2RW822-A2
BZ-2RW822
Solder
Splash resistant
BZ-2RW8225551-A2
One way, BZ-2RW826-A2
32,1 mm
48,3 mm BZ-2RW82-A2
58
www.honeywell.com/sensing
BASIC SWITCHES
SM and SX Series
Subminiature
Basic Switches
SM Series
Approvals:
SX Series
Approvals:
CE, CSA, UL
5 A
CE, CSA, UL
5 A
Ampere rating:
Ampere rating:
OPTIONS
OPTIONS
SM and SX Series Subminiature Basic Switches
are used for simple or precision on/off application
needs. These switches combine small size and
light weight with ample electrical capacity,
precision operation and long life. The SX Series
are small, precision, snap-action switches that are
ideal where savings in space and weight are
important.
Top pin plunger
Top pin plunger
Voltage:
Operating temperature:
250 Vac
-55 °C to 125 °C
-67 ° F to 257 °F
Solder
Termination:
Approvals: 11SM601-H4
TERMINATION
UL, CSA
Approvals:
6SX7-T
UL, CSA
Contact type:
Switching options:
Silver
SPDT
REFERENCE
CONTACTS
Silver
Silver
AMPERE RATING
REFERENCE
11SM1
7 A
3 A
1 A
1SX1-T
11SX1-T
6SX7-T
Single Pole, Double Throw
Quick connect
11SM601-H4
Gold
Straight lever
Straight lever
REFERENCE
Lever length 4,83 mm
111SM1
REFERENCE
311SX2-T
311SX3-T
Roller lever
Lever length ‘A’ 12,8 mm
Lever length ‘A’ 24,5 mm
Simulated roller
REFERENCE
111SM2-T
REFERENCE
311SX5-T
59
www.honeywell.com/sensing
BASIC SWITCHES
Straight lever
ZM, ZX, ZV and ZW Series Subminiature
Basic Switches
ZM, ZX, ZV and ZW Series Subminiature Basic Switches are cost-
effective devices used for simple on/off applications. These switches
combine small size and light weight with ample electrical capability and
long life. Plastic lever capability is available on the ZV Series.
Electrical rating:
Voltage:
0.1 A, 3 A, 5 A or 10.1 A
125/250 Vac
Operating temperature:
Termination:
Contact type:
25 °C to 85 °C [-13 °F to 185 °F]
Quick connect, solder, PCB
Gold or silver
Switching options:
SPDT
ZM Series
Approvals:
UL/CSA
Electrical rating:
0.1 A, 5 A or 10.1 A
TERMINATION
Quick connect
Solder
ELECTRICAL RATING
5 A
5 A
CONTACT TYPE
silver
silver
REFERENCE
ZM50E70D01
ZM50E10D01
OPTIONS
Top pin plunger
Simulated roller lever
TERMINATION
Quick connect
Solder
ELECTRICAL RATING
5 A
5 A
CONTACT TYPE
silver
silver
REFERENCE
ZM50E70E01
ZM50E10E01
TERMINATION
Quick connect
Solder
PCB
Solder
ELECTRICAL RATING
5 A
5 A
10.1 A
0.1 A
CONTACT TYPE
silver
silver
silver
gold
REFERENCE
ZM50E70A01
ZM50E10A01
ZM90G20A01
ZM10B10A01
60
www.honeywell.com/sensing
BASIC SWITCHES
Simulated roller lever
ZX Series
Approvals:
UL/CSA
Electrical rating:
0.1 A or 3 A
5.7
0.224
OPTIONS
12.7
0.5
2.9
0.114
Top pin plunger
1.12
0.044
3.4
5.2
0.134
0.205
12.7
0.5
5.7
0.224
5.2
0.205
2.9
1.12
0.114
0.044
é2.05
é2.2
é0.081
é0.087
0.9
6.5
3.15
0.4
0.035
0.256
0.124
0.016
1.24
5.08
0.2
5.08
0.2
0.049
5.8
12.8
0.228
0.504
é2.05
é2.2
é0.081
é0.087
TERMINATION
PCB
Solder
ELECTRICAL RATING
3 A
3 A
CONTACT TYPE
silver
silver
REFERENCE
ZX40E30E01
ZX40E10E01
0.9
6.5
3.15
0.4
0.035
5.08
0.256
0.124
0.016
1.24
5.08
0.2
0.049
5.8
0.2
12.8
0.228
0.504
ZV Series
Approvals:
Electrical rating:
UL/ENEC
0.1 A, 5 A or 10.1 A
TERMINATION
PCB
Solder
ELECTRICAL RATING
3 A
0.1 A
CONTACT TYPE
silver
gold
REFERENCE
ZX40E30A01
ZX10C10A01
OPTIONS
Straight lever
Top pin plunger
12.7
0.5
5.7
0.224
2.9
0.114
1.12
0.044
3.4
5.2
0.134
0.205
é2.05
é2.2
é0.081
é0.087
0.9
0.035
5.08
6.5
0.256
3.15
0.124
0.4
0.016
1.24
5.08
0.2
0.049
5.8
0.2
12.8
0.228
0.504
TERMINATION
PCB
Solder
ELECTRICAL RATING
3 A
3 A
CONTACT TYPE
silver
silver
REFERENCE
ZX40E30C01
ZX40E10C01
TERMINATION
PCB
Solder
ELECTRICAL RATING
5 A
5 A
0.1 A
CONTACT TYPE
silver
silver
REFERENCE
ZV50E20A01
ZV50E10A01
ZV10B70A01
Quick connect
gold
61
www.honeywell.com/sensing
BASIC SWITCHES
Straight lever
BASIC SWITCHES
ZW Sealed Series
Approvals:
UL/ENEC
Electrical rating:
0.1 A or 5 A
OPTIONS
Top pin plunger
TERMINATION
Solder
Quick connect
ELECTRICAL RATING
5 A
5 A
CONTACT TYPE
silver
silver
REFERENCE
ZV50E10B01
ZV50E70C01
Roller lever
TERMINATION
ELECTRICAL RATING
CONTACT TYPE
REFERENCE
Solder
5 A
silver
ZW50F15AD1
Straight lever
TERMINATION
PCB
Quick connect
ELECTRICAL RATING
5 A
5 A
CONTACT TYPE
silver
silver
REFERENCE
ZV50E20F01
ZV50E70F01
TERMINATION
ELECTRICAL RATING
CONTACT TYPE
REFERENCE
Solder
0.1 A
gold
ZW10E15CD1
62
www.honeywell.com/sensing
BASIC SWITCHES
Roller lever
BASIC SWITCHES
TERMINATION
Wire leads
ELECTRICAL RATING
0.1 A
CONTACT TYPE
gold
REFERENCE
ZW10E90FW1
63
www.honeywell.com/sensing
BASIC SWITCHES
Straight lever
Type B
Roller lever
Type D
V5 Series
Miniature Basic Switches
V5 Series Basic Switches are used for simple or
precision on/off, end of limit, presence/absence,
pressure, temperature and manual operator
interface application needs.
1,6
(P.T.)
20,6
1,6
(P.T.)
22
8,1
8,1
20,6
(O.P.)
15,3
(O.P.)
Voltage:
Operating temperature:
Standard
250 Vac
-55 °C to 85 °C
-67 °F to 185 °F
-55 °C to 150 °C
-67 °F to 302 °F
High temperature
APPROVALS
CE, CSA, ENEC, UL
CE, CSA, ENEC, UL
REFERENCE
V5B210CB3D
V5C010BB3D
Termination:
6,3 mm x 0,8 mm Quick connect
(QC)
High temperature
APPROVALS
CE, CSA, ENEC, UL
REFERENCE
V5C010BB3B
Contact type:
Silver/silver cadmium oxide
Electrical rating:
V5A
V5B/P/R
V5C/D
V5S
20 A
16 A
10 A
22 A
SPDT
Type E
Type C
3,2
(P.T.)
3,2
(P.T.)
34
Switching options:
35,6
Single Pole Double Throw
8,1
8,1
20,6
(O.P.)
15,3
(O.P.)
OPTIONS
Top pin plunger
22,2
20,2
2,8
Ø3,1
APPROVALS
CE, CSA, ENEC, UL
CE, ENEC
REFERENCE
V5A010CB4E
V5B210CB1E
14,7
Operating
position
APPROVALS
CE, ENEC
REFERENCE
V5B210CB1C
3,1
Lever position 2
High temperature
10,3
NC 2
NO 4
High temperature
2,8 15,9
C1
Type G
3,4
28,8
6,4
(P.T.)
Lever slot position 2
4,4
Lever slot position 1
59,5
8,1
10,3
8,1
14,1
15,3
(O.P.)
2,8
APPROVALS
CE, ENEC
CE, CSA, ENEC, UL
CE, CSA, UL
CE, ENEC
CE, ENEC
CE, ENEC
CE, CSA, ENEC, UL
CE, CSA, ENEC, UL
CE, ENEC
REFERENCE
V5A010CB
V5B010CB3
V5B010FB3
V5B010TB
V5B210CB
V5C010BB
V5C010EB3
V5C010TB3
V5P010CB
APPROVALS
REFERENCE
4,8 mm x 0,5 mm QC
Solder terminals
High temperature
CE, ENEC
V5C010BB1G
4,8 mm x 0,5 mm QC
Solder terminals
APPROVALS
CE, ENEC
CE, ENEC
CE, BEAB
CE, BEAB
SWITCHING OPTIONS
REFERENCE
V5D030BB
V5R030CB
V5S020CB
V5S030CB
SPNO
SPNO
SPNC
SPNO
64
www.honeywell.com/sensing
BASIC SWITCHES
AVAILABLE TERMINALS
Quick Connect (QC)
OPTIONS
V7 Series
Miniature Basic Switches
V5 and V7 Series Basic Switches are used for
simple or precision on/off, end of limit, presence/
absence, pressure, temperature and manual
operator interface application needs.
Top pin plunger
10,2
.40
6,4
.25
20,2
.80
2,8
.11
2,8
.11
1,0
.04
2,90
The V7 Series also offers listings with Single Pole,
Single Throw circuitry (available in either normally
open (NO) or normally closed (NC)
Ø hole (3,10/.122 option)
.114
10,3
.41
D8 terminals are European approved when used
with electrical ratings A, B, D, E or S. International
approving agencies require that switches with
these terminals have insulated receptacles or
connector.
2,8
.11
1,5
0.06
8,9
.35
configurations). Refer to our website for details.
NC
NO
18,2
.72
Operating temperature:
COM
MAX
Standard
-40 °C to 82 °C
-40 °F to 180 °F
-40 °C to 200 °C
-40 °F to 350 °F
Quick connect (QC)
2,90
.114
3,10
.122
OPT
0,8
(3)
3,20
.126
3,46
.134
OPT
2,4
.10
14,4
.57
DIA
DIA
.03
22,2
.88
28,8
1.14
High temperature
Termination:
Note: The optional mounting hole dimensions
shown above are standard on V5/V7 International
Series switches.
D8, E8 - 4,8 mm (0.187 in) x 0.5 mm (0.02 in)
E9 - 6,35 mm (0.25 in) x 0,80 mm (0.032 in)
Printed circuit board (PCB)
Electrical rating
5 A
Contact Type
Silver
E8 terminals are European approved when used
with electrical ratings A, B, D, E or S.
VOLTAGE
250 Vac
250 Vac
250 Vac
250 Vac
250 Vac
277 Vac
277 Vac
125 Vac
277 Vac
277 Vac
277 Vac
125 Vac
277 Vac
250 Vac
250 Vac
250 Vac
277 Vac
277 Vac
125 Vac
250 Vac
277 Vac
277 Vac
277 Vac
277 Vac
277 Vac
125 Vac
250 Vac
250 Vac
125 Vac
125 Vac
277 Vac
277 Vac
277 Vac
TERMINATION
REFERENCE
V7-1A17D8
V7-1A17P02
V7-1B17D8
V7-1B19E9
V7-1C17D8
V7-1C17E9
V7-1C18E9
V7-1D10D8
V7-1E10D8
V7-1E17P02
V7-1E19E9
V7-1S17D8
V7-1V19E9
V7-1Z19E9
V7-2A17E9
V7-2B17D8
V7-2B17E9
V7-2B17P02
V7-2S17D8
V7-3A17D8
V7-3E10E8
V7-3E10E9
V7-3E17D8
V7-3E17E9
V7-3E19E9
V7-3S17E9
V7-4A17D8
V7-4A18E9
V7-4S17D8
V7-5D17E9
V7-6B19D8
V7-6C17D8
V7-7A19D8
V7-*A
V7-*B
V7-*C/W
V7-*D
V7-*E
V7-*S
V7-*V
V7-*Z
11 A
15 A
1 A
10 A
Silver
Silver
Gold alloy
Silver
Gold alloy
Silver alloy
PCB
100 mA
21 A
25 A Silver cadmium oxide
CSA, UL, ENEC
PCB
PCB
Approvals:
V7-*C/D/W
Switching options:
E9 terminals are European approved when used
with electrical ratings A, B, D, E, S, V or Z.
CSA, UL
SPDT
Single Pole Double Throw
Printed circuit board (PO2)
Straight lever
Type -002
These terminals interface with snap-on receptacles
and other components from AMPNODU
interconnection system.
PCB terminals are European approved when used
with electrical ratings A, B, D, E, S.
VOLTAGE
277 Vac
277 Vac
277 Vac
277 Vac
REFERENCE
V7-1C17D8-002
V7-1C17E9-002
V7-2B17E9-002
V7-6C18D8-002
65
www.honeywell.com/sensing
BASIC SWITCHES
Roller lever
Type -201
V7 Series
Miniature Basic Switches
(Continued)
Straight lever
Type -022
VOLTAGE
277 Vac
277 Vac
125 Vac
277 Vac
125 Vac
277 Vac
REFERENCE
V7-1C17D8-201
V7-1C17E9-201
V7-1S17D8-201
V7-2B17D8-201
V7-2S17D8-201
V7-7B17D8-201
VOLTAGE
250 Vac
277 Vac
277 Vac
277 Vac
125 Vac
250 Vac
277 Vac
125 Vac
277 Vac
125 Vac
125 Vac
REFERENCE
Type -207
V7-1A17D8-022
V7-1B19D8-022
V7-1C17D8-022
V7-1C18E9-022
V7-1S17D8-022
V7-2A17D8-022
V7-2B17D8-022
V7-2S17D8-022
V7-3E17E9-022
V7-3S17D8-022
V7-3S17E9-022
VOLTAGE
277 Vac
277 Vac
277 Vac
125 Vac
277 Vac
250 Vac
277 Vac
125 Vac
REFERENCE
Type -048
V7-1B10E9-207
V7-1C17D8-207
V7-1C17E9-207
V7-1S17D8-207
V7-1V19E9-207
V7-2A17D8-207
V7-2B17D8-207
V7-7D17D8-207
Simulated roller lever
Type -263
VOLTAGE
277 Vac
277 Vac
277 Vac
277 Vac
277 Vac
125 Vac
277 Vac
250 Vac
REFERENCE
V7-1B17D8-048
V7-1C17D8-048
V7-1V19E9-048
V7-2B17D8-048
V7-2B19E9-048
V7-3S17D8-048
V7-6C18D8-048
V7-9W1AE9-048
High temperature
VOLTAGE
277 Vac
277 Vac
125 Vac
125 Vac
125 Vac
277 Vac
277 Vac
REFERENCE
V7-1B17D8-263
V7-1C17D8-263
V7-1S17D8-263
V7-2S17D8-263
V7-3S17E9-263
V7-6C17D8-263
V7-7B19D8-263
66
www.honeywell.com/sensing
INDEX
Index
111-103EAJ-H01 ...................................... 22
111-104HAK-H01 ..................................... 22
111-202CAK-B01 ..................................... 22
111-202CAK-H01 ..................................... 22
111-303EAK-B01 ..................................... 22
111-802EAJ-B01 ...................................... 22
111-802EAJ-H01 ...................................... 22
111SM1 .................................................... 59
111SM2-T ................................................ 59
11SM1 ...................................................... 59
11SM601-H4 ............................................ 59
11SX1-T ................................................... 59
112-102EAJ-B01 ...................................... 21
112-103FAJ-B01 ...................................... 21
112-103FAJ-H01 ...................................... 21
112-104KAJ-B01 ...................................... 21
112-104KAJ-H01 ...................................... 21
112-105PAJ-B01 ...................................... 21
112-201BAJ-B01 ...................................... 21
112-202EAJ-B01 ...................................... 21
112-202EAJ-H01 ...................................... 21
112-203HAJ-B01 ...................................... 21
112-204KAJ-B01 ...................................... 21
112-502EAJ-B01 ...................................... 21
112-502EAJ-H01 ...................................... 21
112-503JAJ-B01 ...................................... 21
112-504NAJ-B01 ...................................... 21
112-604NAJ-H01 ...................................... 21
115-202CDK-801 ..................................... 23
115-802EDJ-801 ...................................... 23
120-102EAJ-Q01 ...................................... 22
120-103FAJ-Q01 ...................................... 22
120-104KAJ-Q01 ...................................... 22
120-202EAJ-Q01 ...................................... 22
120-502JAJ-Q01 ...................................... 22
121-102EAJ-Q01 ...................................... 22
121-103FAJ-Q01 ...................................... 22
121-104KAJ-Q01 ...................................... 22
121-105PAJ-Q01 ...................................... 22
121-106QAJ-Q01 ...................................... 22
121-202EAJ-Q01 ...................................... 22
121-202KAJ-Q01 ...................................... 22
121-502EAJ-Q01 ...................................... 22
121-502JAJ-Q01 ...................................... 22
121-504NAJ-Q01 ...................................... 22
135-102DAG-J01 ...................................... 18
135-103FAF-J01 ....................................... 18
135-103FAG-J01 ...................................... 18
135-103LAF-J01 ....................................... 18
135-103LFW-J01 ...................................... 18
135-104LAF-J01 ....................................... 18
135-104LAG-J01 ...................................... 18
135-104LFW-J01 ...................................... 18
135-105QAG-J01 ...................................... 18
135-202FAG-J01 ...................................... 18
135-203LAG-J01 ...................................... 18
135-203LFW-J01 ...................................... 18
135-204QAG-J01 ...................................... 18
135-302FAG-J01 ...................................... 18
135-303KAG-J01 ...................................... 18
135-303LFW-J01 ...................................... 18
135-502FAF-J01 ....................................... 18
135-502FAG-J01 ...................................... 18
135-503LAF-J01 ....................................... 18
135-503LAG-J01 ...................................... 18
135-503LFW-J01 ...................................... 18
135-504QAG-J01 ...................................... 18
140-102FAG-RB1 ..................................... 20
140-103LAG-RB1 ..................................... 20
140-104QAG-RB1 ..................................... 20
140-302LAG-RB1 ..................................... 20
140-501FAG-RB1 ..................................... 20
140-502LAG-RB1 ..................................... 20
140-503QAG-RB1 ..................................... 20
141PC15G .................................................. 9
142-102FAG-RB1 ..................................... 21
142-103LAG-RB1 ..................................... 21
142-104QAG-RB1 ..................................... 21
142-302LAG-RB1 ..................................... 21
142-501FAG-RB1 ..................................... 21
142-502LAG-RB1 ..................................... 21
142-503QAG-RB1 ..................................... 21
142PC01D .................................................. 9
142PC01G .................................................. 9
142PC02G .................................................. 9
142PC05D .................................................. 9
142PC05D97 .............................................. 9
142PC05G .................................................. 9
142PC15A .................................................. 9
142PC15AW95 ........................................... 9
142PC15G .................................................. 9
143-101FAG-RC1 ..................................... 20
143-102LAG-RC1 ..................................... 20
143-103QAG-RC1 ..................................... 20
143-201FAG-RC1 ..................................... 20
143-302LAG-RC1 ..................................... 20
143-303QAG-RC1 ..................................... 20
143-501FAG-RC1 ..................................... 20
143-502LAG-RC1 ..................................... 20
143-503QAG-RC1 ..................................... 20
143PC03D .................................................. 9
143PC05DW ............................................... 9
145-101FAG-RC1 ..................................... 21
145-102LAG-RC1 ..................................... 21
145-103QAG-RC1 ..................................... 21
145-201FAG-RC1 ..................................... 21
145-301FAG-RC1 ..................................... 21
145-302LAG-RC1 ..................................... 21
145-303QAG-RC1 ..................................... 21
145-501FAG-RC1 ..................................... 21
145-502LAG-RC1 ..................................... 21
145-503QAG-RC1 ..................................... 21
162PC01D .................................................. 9
163PC01D36 .............................................. 9
163PC01D48 .............................................. 9
163PC01D61 .............................................. 9
163PC01D75 .............................................. 9
164PC01D37 .............................................. 9
164PC01D76 .............................................. 9
1865-01G-L-N .......................................... 14
1865-02G-L-N .......................................... 14
1865-03G-L-N .......................................... 14
1865-04G-L-N .......................................... 14
1865-05G-L-N .......................................... 14
1865-01G-K-N .......................................... 14
1865-02G-K-N .......................................... 14
1865-03G-K-N .......................................... 14
1865-04G-K-N .......................................... 14
1865-05G-K-N .......................................... 14
192-102DET-A01. ..................................... 20
192-102DEV-A01 ..................................... 20
192-102DEW-A01 .................................... 20
192-103LET-A01 ...................................... 20
192-103LEV-A01 ...................................... 20
192-103LEW-A01 ..................................... 20
192-104QET-A01 ...................................... 20
192-104QEV-A01 ..................................... 20
192-104QEW-A01 .................................... 20
192-222LET-A01 ...................................... 20
192-222LEV-A01 ...................................... 20
192-222LEW-A01 ..................................... 20
192-302LET-A01 ...................................... 20
192-302LEV-A01 ...................................... 20
192-302LEW-A01 ..................................... 20
192-303KET-A01 ...................................... 20
192-303KEV-A01 ..................................... 20
192-303KEW-A01 .................................... 20
192-303QET-A01 ...................................... 20
192-303QEV-A01 ..................................... 20
192-303QEW-A01 .................................... 20
192-502LET-A01 ...................................... 20
192-502LEV-A01 ...................................... 20
192-502LEW-A01 ..................................... 20
192-503QET-A01 ...................................... 20
192-503QEV-A01 ..................................... 20
192-503QEW-A01 .................................... 20
195-101CAG-A01 ..................................... 19
195-102DAG-A01 ..................................... 19
195-103LAG-A01 ..................................... 19
195-104QAG-A01 ..................................... 19
195-202LAG-A01 ..................................... 19
195-203LAG-A01 ..................................... 19
195-301CAG-A01 ..................................... 19
195-302LAG-A01 ..................................... 19
195-303KAG-A01 ..................................... 19
195-501DAG-A01 ..................................... 19
195-502LAG-A01 ..................................... 19
195-503QAG-A01 ..................................... 19
197-101CAG-A01 ..................................... 19
197-102DAG-A01 ..................................... 19
197-103LAG-A01 ..................................... 19
197-104QAG-A01 ..................................... 19
197-202LAG-A01 ..................................... 19
197-203LAG-A01 ..................................... 19
197-301CAG-A01 ..................................... 19
197-302LAG-A01 ..................................... 19
197-303KAG-A01 ..................................... 19
197-501DAG-A01 ..................................... 19
197-502LAG-A01 ..................................... 19
197-503QAG-A01 ..................................... 19
198-101CAG-A01 ..................................... 19
198-102DAG-A01 ..................................... 19
198-103LAG-A01 ..................................... 19
67
www.honeywell.com/sensing
INDEX
CPXL04DF ..................................................5
CSDA1BC .................................................55
CSLA1CD .................................................55
CSLA1CF .................................................. 55
CSLA1CH .................................................55
CSLA1DE .................................................. 54
CSLA1DJ .................................................. 54
CSLA1DK .................................................54
CSLA1EL .................................................. 55
CSLA1GD .................................................55
CSLA2CD .................................................55
CSLA2DE ..................................................54
CSLA2DG .................................................54
CSLA2DJ ..................................................54
CSLA2DK .................................................54
CSLA2EJ ..................................................55
CSLA2EL ..................................................55
CSLA2EM .................................................55
CSLA2EN ..................................................55
CSLA2GD .................................................55
CSLH3A45 ................................................55
CSNA111 ..................................................53
CSNB121 ..................................................53
CSNB131 ..................................................53
CSNC241-500 ..........................................53
CSNE151 ..................................................52
CSNE151-100 ...........................................52
CSNE151-200 ...........................................52
CSNF151 ..................................................53
CSNF161 ..................................................53
CSNF161-002 ...........................................53
CSNG251 ..................................................53
CSNJ481 ..................................................54
CSNJ481-001 ...........................................54
CSNK591 ..................................................54
CSNK591-001 ..........................................54
CSNP661 ..................................................53
CSNP661-002 ..........................................53
CSNR151 ..................................................53
CSNR151-002 ..........................................53
CSNR161 ..................................................53
CSNR161-002 ..........................................53
CSNT651 ..................................................53
CSNT651-001 ...........................................53
DC001NDC4 ...............................................6
DC005NDR4 ...............................................6
DCXL01DN .................................................6
DCXL10DN .................................................6
DT-2R-A7 ..................................................58
DUXL01D ....................................................6
DUXL10D ....................................................6
DXXX-001 ................................................40
DXXX-002 ................................................40
DXXX-003 ................................................40
FS300-100 ................................................39
FSG15N1A ................................................13
FSL05N2C ................................................13
Heaters
198-104QAG-A01 ..................................... 19
198-202LAG-A01 ..................................... 19
198-203LAG-A01 ..................................... 19
198-301CAG-A01 ..................................... 19
198-302LAG-A01 ..................................... 19
198-303KAG-A01 ..................................... 19
198-501DAG-A01 ..................................... 19
198-502LAG-A01 ..................................... 19
198-503QAG-A01 ..................................... 19
199-101CAG-A01 ..................................... 19
199-102DAG-A01 ..................................... 19
199-103LAG-A01 ..................................... 19
199-104QAG-A01 ..................................... 19
199-202LAG-A01 ..................................... 19
199-203LAG-A01 ..................................... 19
199-301CAG-A01 ..................................... 19
199-302LAG-A01 ..................................... 19
199-303KAG-A01 ..................................... 19
199-501DAG-A01 ..................................... 19
199-502LAG-A01 ..................................... 19
199-503QAG-A01 ..................................... 19
1SX1-T ..................................................... 59
1TB1-2 ..................................................... 58
24PC01SMT ............................................... 5
24PC05SMT ............................................... 5
24PC15SMT ............................................... 5
24PCAFA6G ................................................ 4
24PCBFA6D ................................................ 4
24PCBFA6G ................................................ 4
24PCCFA6D ................................................ 4
24PCCFA6G ................................................ 4
24PCCFG6G ................................................ 4
24PCDFA6D ................................................ 4
24PCDFA6G ................................................ 4
24PCDFG6G ................................................ 4
24PCEFA6D ................................................ 4
24PCEFA6G ................................................ 4
24PCFFA6D ................................................ 4
24PCFFA6G ................................................ 4
26PC01SMT ............................................... 5
26PC05SMT ............................................... 5
26PC15SMT ............................................... 5
26PCAFA6D ................................................ 4
26PCAFA6G ................................................ 4
26PCAFG6G ................................................ 4
26PCBFA6D ................................................ 4
26PCBFA6G ................................................ 4
26PCCFA6D ................................................ 4
26PCCFA6G ................................................ 4
26PCCFG6G ................................................ 4
26PCDFA6D ................................................ 4
26PCDFA6G ................................................ 4
26PCDFG2G ................................................ 5
26PCFFA6G ................................................ 4
26PCFFG6G ................................................ 4
26PCFFU5G ................................................ 5
26PCGFA6D ................................................ 4
2SS52M ................................................... 44
2SS52M-S ................................................ 44
311SX2-T ................................................. 59
311SX3-T ................................................. 59
311SX5-T ................................................. 59
40PC001B1A.............................................. 8
40PC006G1A .............................................. 8
40PC015G1A .............................................. 8
40PC015V1A .............................................. 8
40PC030G1A .............................................. 8
40PC100G1A .............................................. 8
40PC150G1A .............................................. 8
40PC250G1A .............................................. 8
40PC500G1A .............................................. 8
6SX7-T ..................................................... 59
ASDX001D44R ........................................... 8
ASDX001G24R ........................................... 8
ASDX005D44R ........................................... 8
ASDX005G24R ........................................... 8
ASDX015A24R ........................................... 8
ASDX015D44R ........................................... 8
ASDX015G24R ........................................... 8
ASDX030A24R ........................................... 8
ASDX030D44R .......................................... 8
ASDX030G24R ........................................... 8
ASDX100A24R ........................................... 8
ASDX100D44R ........................................... 8
ASDX100G24R .......................................... 8
AWM2100V .............................................. 10
AWM2200V .............................................. 10
AWM2300V .............................................. 10
AWM3100V .............................................. 10
AWM3200V .............................................. 10
AWM3300V .............................................. 10
AWM42150VH .......................................... 10
AWM42300V ............................................ 10
AWM43300V ............................................ 10
AWM43600V ............................................ 10
AWM5101VN ............................................ 11
AWM5102VN ............................................ 11
AWM5104VC ............................................ 11
AWM5104VN ............................................ 11
AWM720P1 .............................................. 11
AWM92100V ............................................ 12
AWM92200V ............................................ 12
BA-2RB-A2 ............................................... 57
BA-2RQ1-A2 ............................................. 57
BA-2RV-A2 ............................................... 58
BE-2R-A4 .................................................57
BZ-2R-A2 .................................................57
BZ-2RD-A2 ............................................... 57
BZ-2RDS-A2 .............................................57
BZ-2RDS-A2S .......................................... 57
BZ-2RQ181-A2 .........................................58
BZ-2RQ18-A2 ........................................... 57
BZ-2RQ1-A2 .............................................57
BZ-2RW80-A2 .......................................... 58
BZ-2RW822 .............................................. 58
BZ-2RW8225551-A2 ................................58
BZ-2RW822-A2 ........................................58
BZ-2RW826-A2 ........................................58
BZ-2RW82-A2 .......................................... 58
BZ-2RW84-A2 .......................................... 58
BZ-2RW863-A2 ........................................58
BZ-R .........................................................57
BZ-R169 ................................................... 57
BZ-R-A2 ................................................... 57
CPCL04DFC ................................................ 5
CPCL04GFC ................................................ 5
CPCL10DF .................................................. 5
CPCL10DFC ................................................ 5
3100 Silcone Wire-wound...................... 37
3200 Silicone Chemically-etched............37
3400 Kapton or High Temperature .......... 38
78000 Transparent.................................. 38
HEL-700-T-0-A .........................................16
HEL-700-T-0-B .........................................16
68
www.honeywell.com/sensing
INDEX
HEL-700-T-1-A .........................................16
HEL-700-T-1-B .........................................16
HEL-700-U-0-A .........................................16
HEL-700-U-0-B .........................................16
HEL-700-U-0-C .........................................16
HEL-700-U-1-A .........................................16
HEL-700-U-1-B .........................................16
HEL-700-U-1-C .........................................16
HEL-705-T-0-12-00 .................................. 17
HEL-705-T-1-12-00 .................................. 17
HEL-705-U-0-12-00 .................................. 17
HEL-705-U-1-12-00 .................................. 17
HEL-707-T-0-12-00 .................................. 17
HEL-707-T-1-12-00 .................................. 17
HEL-707-U-0-12-00 .................................. 17
HEL-707-U-1-12-00 .................................. 17
HEL-711-T-0-12-00 .................................. 17
HEL-711-T-1-12-00 .................................. 17
HEL-711-U-0-12-00 .................................. 17
HEL-711-U-1-12-00 .................................. 17
HEL-712-T-0-12-00 .................................. 17
HEL-712-T-1-12-00 .................................. 17
HEL-712-U-0-12-00 .................................. 17
HEL-712-U-1-12-00 .................................. 17
HEL-716-T-0-12-00 .................................. 17
HEL-716-T-1-12-00 .................................. 17
HEL-716-U-0-12-00 .................................. 17
HEL-716-U-1-12-00 .................................. 17
HEL-716-U-1-12-C2 .................................17
HEL-717-T-0-12-00 .................................. 17
HEL-717-T-1-12-00 .................................. 17
HEL-717-U-0-12-00 .................................. 17
HEL-717-U-1-12-00 .................................. 17
HIH-3602-A .............................................. 15
HIH-3602-C .............................................. 15
HIH-3602-L ............................................... 15
HIH-3610-001 ........................................... 15
HIH-3610-002 ........................................... 15
HIH-3610-003 ........................................... 15
HIH-3610-004 ........................................... 15
HLC1395-002 ........................................... 49
HLC2705-001 ........................................... 48
HOA0149-001 ........................................... 49
HOA0866-T55 ........................................... 50
HOA0870-N51 .......................................... 50
HOA0880-P51 .......................................... 50
HOA0890-L55 ........................................... 50
HOA0901-011 ........................................... 48
HOA0902-011 ........................................... 48
HOA0961-N51 .......................................... 51
HOA0971-N51 .......................................... 51
HOA1180-002 ........................................... 49
HOA1397-002 ........................................... 49
HOA1405-002 ........................................... 49
HOA1870-031 ........................................... 50
HOA1877-001 ........................................... 50
HOA1879-015 ........................................... 50
HOA1882-012 ........................................... 50
HOA2498-002 ........................................... 49
HOA6963-N51 .......................................... 51
HOA6972-N55 .......................................... 51
HOA6981-L51 ........................................... 51
HOA6990-T51 ........................................... 51
HOA7720-M22 .......................................... 51
HOA7730-M22 ..........................................51
ICL1010002-01 ........................................23
ICL1010004-01 ........................................23
ICL1210005-01 ........................................23
ICL1220002-01 ........................................23
ICL122R508-01 ....................................... 23
ICL1240002-01 ....................................... 23
ICL1250002-01 ....................................... 23
ICL1510006-01 ....................................... 23
ICL1512004-01 ....................................... 23
ICL1516004-01 ....................................... 23
ICL1522102-01 ....................................... 23
ICL152R508-01 ....................................... 23
ICL155R006-01 ....................................... 23
ICL155R007-01 ....................................... 23
ICL1580003-01 ....................................... 23
ICL2210008-01 ....................................... 23
ICL2212103-01 ....................................... 23
ICL221R020-01 ....................................... 23
ICL222R018-01 ....................................... 23
ICL222R515-01 ....................................... 23
ICL32OR530-01 ....................................... 23
ICL321R030-01 ....................................... 23
LL102101 ................................................ 56
LL103000 ................................................56
LL103101 ................................................56
LL105100 ................................................56
LLE102000 ..............................................56
LLE105000 ..............................................56
RDXXX-001 .............................................41
RDXXX-002 .............................................41
SD1440-003L ..........................................47
SD2440-004 ............................................47
SD3443-003 ............................................47
SD5443-003 ............................................47
SD5600-001 ............................................48
SD5610-001 ............................................48
SD5620-001 ............................................48
SD5630-001 ............................................48
SDP8405-003 ..........................................47
SDP8406-002 ..........................................47
SDP8436-003 ..........................................47
SDP8600-001 ..........................................48
SE1450-003L ..........................................46
SE1470-003L ..........................................46
SE2460-003 ............................................46
SE2470-002 ............................................46
SE3455-004 ............................................46
SE3470-003 ............................................46
SE5455-003 ............................................46
SE5470-004 ............................................46
SEP8505-003 ..........................................46
SEP8506-002 ..........................................46
SEP8705-003 ..........................................46
SEP8736-003 ..........................................46
SMD2440-012 .........................................47
SME2470-021 .........................................46
SR13C-A1 ...............................................44
SR13D-A1 ...............................................44
SR13F-A1 ................................................44
SR13R-A1 ...............................................44
SR16C-J4 ................................................44
SR16C-J6 ................................................. 44
SR16C-N .................................................. 44
SR17C-J6 ................................................. 45
SR17C-J7 ................................................. 45
SS41 ........................................................ 42
SS411A .................................................... 42
SS413A .................................................... 42
SS441A .................................................... 42
SS443A .................................................... 42
SS449A .................................................... 42
SS461A .................................................... 42
SS466A .................................................... 42
SS49 ........................................................ 43
SS495A .................................................... 42
SS495A1 .................................................. 42
SS495A1-S .............................................. 42
SS495A-SP .............................................. 42
SS495B ....................................................43
SS496B ....................................................43
SS511AT .................................................. 43
SS513AT .................................................. 43
SS51T ...................................................... 43
SS541AT .................................................. 43
SS543AT .................................................. 43
SS549AT .................................................. 43
SS561AT .................................................. 43
SS566AT .................................................. 43
SS94A1 ....................................................43
SS94A1F .................................................. 43
SS94A2 ....................................................43
TD4A ........................................................17
TD5A ........................................................17
Temperature - Probes
Air Conditioning.....................................25
Air/Gas ................................................... 26
Earth Return (Ground) ............................25
ES110 Inlet Air ....................................... 24
ES120 Coolant/Oil .................................. 24
Immersion .............................................. 26
Refrigerant.............................................. 25
Surface ................................................... 25
Thermostats - Commercial
2450A Heat Detection .............................29
2450CM Ceramic Manual Reset .............. 28
2450HR Phenolic Automatic Reset .........27
2450R Fully Sealed.................................30
2450R Phenolic Annular Automatic Reset ....30
2450R Phenolic Automatic Reset............27
2450R Phenolic “One-shot” ½ in ........... 29
2450R Protected.....................................30
2450RC Ceramic Automatic Reset .......... 28
2450RCH Ceramic Automatic Reset ........28
2450RCH Ceramic “One-shot” ½ in........29
2455A Heat Detection .............................29
2455R Phenolic Automatic Reset............27
2455R Phenolic “One-shot” ½ in .......... 29
2455R Protected.....................................30
2455RBV Overmolded Automatic Reset .. 29
2455RC Ceramic Automatic Reset .......... 28
2455RC Ceramic “One-shot” ½ in .........29
2455RM Phenolic Manual Reset .............28
Thermostats - Precision
3000 Custom-packaged .......................... 33
3100 Hermetic ........................................31
3100U Hermetic...................................... 31
3100UX Hermetic ................................... 31
69
www.honeywell.com/sensing
INDEX
3106 Hermetic ........................................ 31
3150 Low Silhouette Hermetic................ 32
3150U Low Silhouette Hermetic ............. 32
3150UX Low Silhouette Hermetic ........... 32
3156 Low Silhouette Hermetic................ 32
3156U Low Silhouette Hermetic ............. 32
3450CM Ceramic Manual Reset .............. 35
3450HR Phenolic Automatic Reset ......... 34
3450R Phenolic Automatic Reset............ 34
3450R Phenolic “One-shot” ½ in ........... 36
3450RC Ceramic Automatic Reset .......... 34
3450RC Ceramic “One-shot” ½ in .......... 36
3450RCH Ceramic Automatic Reset ........ 34
3450RCH Ceramic “One-shot” ½ in....... 36
3455R Phenolic Automatic Reset............ 34
3455R Phenolic “One-shot” ½ in .......... 36
3455RBV Overmolded Automatic Reset .. 35
3455RC Ceramic Automatic Reset .......... 34
3455RC Ceramic “One-shot” ½ in .............. 36
3455RM Phenolic Manual Reset ............. 35
3800 Industrial Grade ............................. 32
V5A010CB................................................ 64
V5A010CB4E............................................ 64
V5B010CB3 .............................................. 64
V5B010FB3 .............................................. 64
V5B010TB ................................................ 64
V5B210CB................................................ 64
V5B210CB1C ........................................... 64
V5B210CB1E............................................ 64
V5B210CB3D ........................................... 64
V5C010BB................................................ 64
V5C010BB1G ........................................... 64
V5C010BB3B ........................................... 64
V5C010BB3D ........................................... 64
V5C010EB3 .............................................. 64
V5C010TB3 .............................................. 64
V5D030BB ................................................ 64
V5P010CB................................................ 64
V5R030CB ................................................ 64
V5S020CB................................................ 64
V5S030CB................................................ 64
V7-1A17D8 ............................................... 65
V7-1A17D8-022 ....................................... 66
V7-1A17P02 ............................................. 65
V7-1B10E9-207 ........................................ 66
V7-1B17D8 ............................................... 65
V7-1B17D8-048 ....................................... 66
V7-1B17D8-263 ....................................... 66
V7-1B19D8-022 ....................................... 66
V7-1B19E9 ............................................... 65
V7-1C17D8 ............................................... 65
V7-1C17D8-002 ....................................... 65
V7-1C17D8-022 ....................................... 66
V7-1C17D8-048 ....................................... 66
V7-1C17D8-201 ....................................... 66
V7-1C17D8-207 ....................................... 66
V7-1C17D8-263 ....................................... 66
V7-1C17E9 ............................................... 65
V7-1C17E9-002 ........................................ 65
V7-1C17E9-201 ........................................ 66
V7-1C17E9-207 ........................................ 66
V7-1C18E9 ............................................... 65
V7-1C18E9-022 ........................................ 66
V7-1D10D8 ............................................... 65
V7-1E10D8 ............................................... 65
V7-1E17P02 .............................................65
V7-1E19E9 ............................................... 65
V7-1S17D8 ............................................... 65
V7-1S17D8-022 ....................................... 66
V7-1S17D8-201 ....................................... 66
V7-1S17D8-207 ....................................... 66
V7-1S17D8-263 ....................................... 66
V7-1V19E9 ............................................... 65
V7-1V19E9-048 ........................................66
V7-1V19E9-207 ........................................66
V7-1Z19E9 ............................................... 65
V7-2A17D8-022 ....................................... 66
V7-2A17D8-207 ....................................... 66
V7-2A17E9 ............................................... 65
V7-2B17D8 ............................................... 65
V7-2B17D8-022 ....................................... 66
V7-2B17D8-048 ....................................... 66
V7-2B17D8-201 ....................................... 66
V7-2B17D8-207 ....................................... 66
V7-2B17E9 ............................................... 65
V7-2B17E9-002 ........................................65
V7-2B17P02 .............................................65
V7-2B19E9-048 ........................................66
V7-2S17D8 ............................................... 65
V7-2S17D8-022 ....................................... 66
V7-2S17D8-201 ....................................... 66
V7-2S17D8-263 ....................................... 66
V7-3A17D8 ............................................... 65
V7-3E10E8 ............................................... 65
V7-3E10E9 ............................................... 65
V7-3E17D8 ............................................... 65
V7-3E17E9 ............................................... 65
V7-3E17E9-022 ........................................66
V7-3E19E9 ............................................... 65
V7-3S17D8-022 ....................................... 66
V7-3S17D8-048 ....................................... 66
V7-3S17E9 ............................................... 65
V7-3S17E9-022 ........................................66
V7-3S17E9-263 ........................................66
V7-4A17D8 ............................................... 65
V7-4A18E9 ............................................... 65
V7-4S17D8 ............................................... 65
V7-5D17E9 ............................................... 65
V7-6B19D8 ............................................... 65
V7-6C17D8 ............................................... 65
V7-6C17D8-263 ....................................... 66
V7-6C18D8-002 ....................................... 65
V7-6C18D8-048 ....................................... 66
V7-7A19D8 ............................................... 65
V7-7B17D8-201 ....................................... 66
V7-7B19D8-263 ....................................... 66
V7-7D17D8-207 ....................................... 66
V7-9W1AE9-048 ...................................... 66
XCA415AN ................................................. 7
XCX01DNC ................................................. 7
XCX01DNH ................................................. 7
XCX15DNC ................................................. 7
XPC01DFC .................................................. 7
XPC15DTC ................................................. 7
XSXL04GF .................................................. 7
ZM10B10A01 ........................................... 60
ZM50E10A01 ............................................60
ZM50E10D01 ............................................60
ZM50E10E01 ............................................60
ZM50E70A01 ............................................60
ZM50E70D01 ............................................60
ZM50E70E01 ............................................60
ZM90G20A01 ...........................................60
ZV10B70A01 ............................................61
ZV50E10A01 ............................................61
ZV50E10B01 ............................................62
ZV50E20A01 ............................................61
ZV50E20F01 .............................................62
ZV50E70C01 ............................................62
ZV50E70F01 .............................................62
ZW10E15CD1 ...........................................62
ZW10E90FW1 ...........................................63
ZW50F15AD1 ...........................................62
ZX10C10A01 ............................................61
ZX40E10C01 ............................................61
ZX40E10E01 .............................................61
ZX40E30A01 ............................................61
ZX40E30C01 ............................................61
ZX40E30E01 .............................................61
70
www.honeywell.com/sensing
Inside back
cover - blank
Warranty/Remedy
Sales and Service
Honeywell warrants goods of its manufacture as being free of defective
material and faulty workmanship. Contact your local sales office for warranty
information. If warranted goods are returned to Honeywell during that period
of coverage, Honeywell will repair or replace without charge those items it
finds defective. The foregoing is Buyer’s sole remedy and is in lieu of
all other warranties, expressed or implied, including those of
merchantability and fitness for a particular purpose.
While we provide application assistance, personally, through our literature
and the Honeywell web site, it is up to the customer to determine the suitability
of the product in the application.
Honeywell serves its customers through a worldwide network of sales
offices, representatives and distributors. For application assistance,
current specifications, pricing or name of the nearest Authorised
Distributor, contact your local sales office or:
INTERNET: www.honeywell.com/sensing
E-mail: info.sc@honeywell.com
Specifications may change at any time without notice. The information
we supply is believed to be accurate and reliable as of this printing. However,
we assume no responsibility for its use.
Spain
Honeywell S.A.
Phone: +(34) 91 313 6100
FAX: +(34) 91 313 6129
South Korea
Italy
ASIA PACIFIC
EUROPE
LATIN AMERICA
Honeywell Korea Co Ltd
Phone: +(822) 799-6167
Fax: +(822) 792-9013
Honeywell S.p.A.
Phone: +(39) 02 92146 450/
456
Control Products
Austria
Honeywell Latin
Asia Pacific Headquarters
Phone: +(65) 6355-2828
Fax: +(65) 6445-3033
Honeywell Austria GmbH
Phone: +(43) 1 727 80 366/
246
America Headquarters
Phone: 1-305-805-8188
FAX: 1-305-883-8257
FAX: +(39) 02 92146 490
Sweden
Honeywell AB
Phone: +(46) 8 775 55 00
FAX: +(46) 8 775 56 00
Malaysia
Honeywell Engineering Sdn
Bhd
Phone: +(60-3) 7958-4988
Fax: +(60-3) 7958-8922
The Netherlands
Honeywell B.V.
Phone: +(31) 20 565 69 11
FAX: +(31) 20 565 66 00
FAX: +(43) 1 727 80 337
Australia
Honeywell Limited
Phone: +(61) 2-9370-4500
FAX: +(61) 2-9370-4525
Toll Free 1300-36-39-36
Toll Free Fax: 1300-36-04-70
Argentina
Honeywell S.A.I.C.
Phone: +(54-11) 4383-3637
FAX: +(54-11) 4325-6470
Belgium
Honeywell SA/NV
Phone: +(32) 2 728 2522
FAX: +(32) 2 728 2502
Switzerland
Honeywell AG
Phone: +(41) 1 855 24 40
FAX: +(41) 1 855 24 45
New Zealand
Honeywell Limited
Phone: +(64-9) 623-5050
Fax: +(64-9) 623-5060
Toll Free (0800) 202-088
Norway
Honeywell A/S
Phone: +(47) 66 76 20 00
FAX: +(47) 66 76 20 90
Brazil
Bulgaria
Honeywell EOOD
Phone: +(359) 2 979 00 23
FAX: +(359) 2 979 00 24
Honeywell Do Brasil & Cia
Phone: +(55-11) 4166-1900
FAX: +(55-11) 4166-1901
China – PRC - Beijing
Honeywell China Inc.
Phone: +(86-10) 8458-3280
Fax: +(86-10) 8458-3102
Turkey
Honeywell Turkey A.S.
Phone: +(90) 216 5756620
FAX: +(90) 216 5756637
Poland
Philippines
Honeywell Sp. zo.o
Phone: +(48) 606 09 64
FAX: +(48) 606 09 01
Chile
Honeywell Systems
(Philippines) Inc.
Phone: +(63-2) 636-1661/
1662
Czech Republic
Honeywell Chile, S.A.
Phone: +(56-2) 425-8400
FAX: +(56-2) 425-8410
China – PRC - Shanghai
Honeywell China Inc.
Phone: (86-21) 6237-0237
Fax: (86-21) 6237-1237
Honeywell spol. s.r.o.
Phone: +(420) 242 442 111
FAX: +(420) 242 442 182
Ukraine
Honeywell
Phone: +(380) 44 201 44 74
FAX: +(380) 44 201 44 75
Portugal
Fax: +(63-2) 638-4013
Honeywell Portugal Lda
Phone: +(351 21) 424 50 00
FAX: +(351 21) 424 50 99
Mexico
Denmark
Honeywell A/S
Phone: +(45) 39 55 55 55
FAX: +(45) 39 55 55 58
Honeywell S.A. de C.V.
Phone: +(52) 55 5081-0200
FAX: +(52) 55 5081-0202
Singapore
China - Hong Kong S.A.R.
Honeywell Ltd.
Phone: +(852) 2953-6412
Fax: +(852) 2953-6767
United Kingdom
Honeywell Control Systems
Ltd
Phone: +(44) 1698 481481
FAX: +(44) 1698 481676
Honeywell South East Asia
Phone: +(65) 6355-2828
Fax: +(65) 6445-3033
Romania
Honeywell Bucharest
Phone: +(40) 21 231 64 37/
38
Puerto Rico, Caribbean
Honeywell Inc.
Phone: +(787) 792-7075
FAX: +(787) 792-0053
Finland
Honeywell OY
Phone: +(358) 9 3480101
FAX: +(358) 9 34801375
Thailand
Honeywell Systems (Thailand)
Ltd.
Phone: +(662) 693-3099
FAX: +(662) 693-3085
Indonesia
FAX: +(40) 21 231 6439
Honeywell Indonesia Pte Ltd.
Phone: +(62) 21-535-8833
FAX: +(62) 21-5367 1008
Mediterranean & African
Distributors
Honeywell SpA
Phone: +(39) 2 921 46 232
FAX: +(39) 2 921 46 233
Commonwealth of
Independent States (CIS)
Z.A.O. Honeywell
Phone: +(7 095) 796 98 36
FAX: +(7 095) 797 99 06
Venezuela
Honeywell C.A.
Phone: +(58-212) 273-0511
FAX: +(58-212) 273-0599
France
Honeywell SA
Phone: +(33) 1 60 19 80 40
FAX: +(33) 1 60 19 81 73
India
Taiwan R.O.C.
TATA Honeywell Ltd.
Phone: +(91) 20 6870 445/
446
Fax: +(91) 20 681 2243/ 687
5992
Honeywell Taiwan Ltd.
Phone: +(886-2) 2245-1000
FAX: +(886-2) 2245-3241
Middle East Headquarters
Honeywell Middle East Ltd.
Phone: +(9712) 443 2119
FAX +(9712) 443 2536
Slovak Republic
Honeywell s.r.o.
Phone: +(421 2) 58 247 403
FAX: +(421 2) 58 247 415
Germany
Honeywell AG
Phone: +(49) 69 8064 444
FAX: +(49) 69 8064 442
Japan
Honeywell Inc
Phone: +(81) 3 5440 1425
Fax: +(81) 3 5440 1368
South Africa (Republic of)
Honeywell Southern Africa
Honeywell S.A. Pty. Ltd
Phone: +(27) 11 695 8000
FAX +(27) 11 805 1504
NORTH AMERICA
Hungary
Honeywell Kft.
Phone: +(361) 451 43 00
FAX: +(361) 451 43 43
USA/Canada
Honeywell
Sensing and Control
Phone: 1-800-537-6945
1-815-235-6847
FAX: 1-815-235-6545
E-mail:
info.sc@honeywell.com
This publication does not constitute a contract between Honeywell and its customers. The contents may be changed at any time without notice. It is
the customer’s responsibility to ensure safe installation and operation of the products. Detailed mounting drawings of all products illustrated are
available on request. Copyright 2004 Honeywell International Inc. All Rights Reserved.
Sensing and Control
www.honeywell.com/sensing
Newhouse Industrial Estate
Motherwell ML1 5SB
Scotland, UK
100455-EN Issue 2 2/04 UK07 GLO Printed on environmentally friendly paper.
S p in e La yo u t :
Issue 2/February 2004
Commercial Switches and Sensors
相关型号:
©2020 ICPDF网 联系我们和版权申明