112-104KAJ-B01_技术文档

Commercial

Switches and Sensors

Pressure

Mass Airflow

Force

Humidity

Product solutions on the Interactive Catalogue

Temperature - RTDs

Temperature - Thermistors

Temperature - Probes

Thermostats - Commercial

Thermostats - Precision

Heaters

Combi-sensor

Thermal Cutoffs

Position

Infrared

Current

Liquid Level

Basic Switches

February 2004

INTRODUCTION

COMMERCIAL SWITCHES AND SENSORS

Honeywell’s Commercial Switches and Sensors offer a wide selection of products and technology capability for applications in medical devices and equipment;

heating, ventilation, air-conditioning and refrigeration; information technology; home appliances; motor control and automotive passenger cars. This catalogue

contains a selection of our most popular, established product listings – all tried and tested in field applications. To view our complete range of products, visit our

website at www.honeywell.com/sensing.

How to use this catalogue

System critical sensing solutions

For each referenced listing, key specification parameters, descriptions and

mounting drawing information are presented. These listings illustrate our

capabilities while the specifications included allow easy differentiation between

similar products. For products with no specific reference numbers,

please contact your local Honeywell sales office.

A system is critical if the quality, reliability, delivery and customer service

associated with a component part is essential to the performance of the

operation or end product. If a sensor or switch is critical to the performance,

cost effectiveness, delivery or safety of a product or operation, then it is

system critical. It is therefore a defining element in the performance of the

system under whatever conditions apply. Failure of the component – or failure

of delivery of the component – results in lost productivity, increased costs or a

catastrophic event such as a shutdown. Therefore selecting the right product

is essential. It can make the difference between success and failure.

There are, of course, many more product options available. Full product

specification information may be accessed on our website

(www.honeywell.com/sensing). At the Home page enter the catalogue listing

reference in the SEARCH box and click GO! This will take you directly to the

interactive catalogue/specification search tables for this listing. Alternatively,

select and click the interactive catalogue icon on the Home page and then

choose a product category against which to do a specification search.

Honeywell – delivering excellence

To deliver the right products for our customers’ applications we listen to them

to understand their needs. Using techniques such as “Voice of the Customer”

and “Concept Engineering” we make sure that the products and solutions we

deliver are the right ones. As part of Honeywell we can use local knowledge

and understanding combined with global expertise and resources to achieve

this. We can deploy many key technologies to bring innovative solutions to

customers’ problems.

Also on the website you can access installation instructions, application notes,

Frequently Asked Questions (FAQs), selection guides and additional technical

information.

Mounting dimensions

Our products are manufactured to work well and to last. We use Six Sigma

Plus productivity to ensure this is the case. We have award winning

manufacturing facilities around the world and recognised world class

business excellence in manufacturing and supply chain management to

deliver on time, anywhere in the world.

Mounting dimensions shown in each product section are for reference only.

For exacting layout work, request an engineering drawing from your nearest

Honeywell sales office. Where dual dimensions are shown on mounting

drawings, the first or upper one is millimetres (mm) and the second or lower

is inches (in). Where single dimensions are shown, they are millimetres

(mm), unless otherwise stated.

Our e-business approach offers instant access to product information,

technical support and application knowledge through our Internet site. Check

out our powerful new interactive catalogue that can search and find the right

products for customers’ needs and deliver a drawing ready for incorporation

in a CAD system direct to your desk.

To order these products

Simply contact your local Honeywell Distributor or your local Honeywell office.

More information on Honeywell products and how to contact us can be found

at http://locator.micro.honeywell.com/

And of course, we manage our whole business for the benefit of our

customers, using an acknowledged world-class business excellence approach

that incorporates Six Sigma principles.

2

www.honeywell.com/sensing

CONTENTS

Pressure Sensors

Page 4 Thermostats - Precision

Page 31

Absolute, differential, gauge, and vacuum gauge pressure sensors for

media that are compatible with a silicon diaphragm. These sensors are

ideal for low-cost commercial grade applications, such as printed circuit

boards. Small and reliable, they offer excellent repeatability and high

accuracy under varying environmental conditions.

Hermetic and non-hermetic thermostats in standard and custom

packages for use in a wide variety of precision applications.

Heaters

Page 37

Wire-wound, chemically-etched, high temperature and transparent

heaters in a variety of sizes and geometries.

Mass Airflow Sensors

Page 10

Amplified and unamplified microbridge mass airflow sensors provide a

sensitive and fast response and high accuracy over a broad range of gas

and air flows.

Combi-sensor

Page 39

Liquid pressure/temperature sensor that uses piezoresistive and

thermistor sensing technology to measure water pressure and

temperature.

Force Sensors

Page 13

Compact, extremely sensitive devices for precise, reliable performance in

any application that requires precision force measurement.

Thermal Cutoffs

Page 40

Dependable organic thermal cutoffs in temperatures ranging from 72 °C

to 240 °C [162 °F to 464 °F]. They are available in various lead lengths

and configurations.

Humidity Sensors

Page 15

Relative humidity sensors with on-chip signal conditioning. Chemically

resistant packaging to accommodate harsh environments. Sensor

construction consists of a planar capacitor with a second polymer layer

to protect against dirt, dust, oils and other hazards.

Position Sensors

Page 42

Hall effect and magnetoresistive sensors for all applications that require

accurate, reliable outputs.

Temperature Sensors - RTDs

Page 16

Infrared Products

Page 46

Platinum and silicon-based thin film resistance temperature devices

(RTDs) for applications that require small package size, accuracy and

linear outputs.

Optoelectronic standard infrared emitting diodes (IREDs), sensors and

assemblies for object presence, limit and motion sensing, position

encoding and movement encoding.

Temperature Sensors - Thermistors

Page 18

Current Sensors

Page 52

Precision Hi-Rel negative temperature coefficient (NTC) thermistors and

positive temperature coefficient (PTC) thermistors for use in a broad

variety of temperature measurement and control applications.

Adjustable linear null balance, digital and linear output current sensors

for monitoring ac or dc current.

Liquid Level Sensors

Page 56

Temperature Sensors - Probes

Page 24

Sensitive sensors in a variety of housing types for detecting the presence

or absence of a wide range of liquids.

A variety of customized probes for use in the automotive and other

industries.

Basic Switches

Page 57

Thermostats - Commercial

Page 27

Standard, miniature and subminiature switches, available in a range of

enclosures and with a variety of actuators. They are ideal for use alone or

built into assemblies.

Dependable bimetal thermostats include choice of automatic or manual

reset, phenolic or ceramic housings, and a variety of mounting brackets

and terminal options.

WARNING

!

MISUSE OF DOCUMENTATION

• The information presented in this product sheet (or

catalogue) is for reference only. DO NOT USE this

document as product installation information.

• Complete installation, operation and maintenance

information is provided in the instructions supplied with

each product.

WARNING

!

PERSONAL INJURY

DO NOT USE these products as safety or emergency stop

devices, or in any other application where failure of the

product could result in personal injury

Failure to comply with these instructions could result in

death or serious injury.

Failure to comply with these instructions could result in

death or serious injury.

3

www.honeywell.com/sensing

PRESSURE

Honeywell pressure sensors are small, low cost and reliable. They feature excellent repeatability,

high accuracy, and reliability under varying environmental conditions. In addition, they feature

highly consistent operating characteristics from one sensor to the next and interchangeability

without recalibration.

Pressure Sensors

We offer three pressure sensor measurement types—absolute, differential and gauge—including

vacuum gauge and bidirectional types. A wide variety of pressure ranges, along with both amplified

and unamplified versions, are available.

Honeywell pressure sensors are best used in applications which require precision pressure

measurement.

Gauge

Flow Through

Type 6

24PC/26PC Series

Signal conditioning:

Unamplified

MOUNTING DIMENSIONS (for reference only) mm/in

noncompensated- (24PC Series)

GAUGE SENSOR

compensated - (26 PC Series)

10 Vdc typ.

1 x 4 Termination (Style 6) Port Style A, Straight

Pin 1 is notched, Pin 2 is next to Pin 1, etc.

Supply voltage:

12 Vdc max. (24PC Series)

16 Vdc max. (26PC Series)

Operating temperature:

-40 °C to 85 °C

-40 °F to 185 °F

Port style:

Termination:

Straight or Flow Through

PCB; 1 x 4; 0.600 in (Type 6)

PCB; 2 x 2; (Type 2)

1 x 4 with connector (Type 5)

OPTIONS

Differential

MOUNTING DIMENSIONS (for reference only) mm/in

DIFFERENTIAL SENSOR

1 X 4 Termination (Style 6) Port Style A, Straight (Only)

24PC Series

MEASUREMENT TYPE

Gauge/Vacuum Gauge

PRESSURE RANGE REFERENCE

1.0 psi

24PCAFA6G

MEASUREMENT TYPE

PRESSURE RANGE REFERENCE

Flow Through/Vacuum Gauge 15.0 psi

24PCCFG6G

Differential/Vacuum Gauge

Gauge/Vacuum Gauge

5.0 psi

24PCBFA6D

24PCBFA6G

Flow Through/Vacuum Gauge 30.0 psi

24PCDFG6G

Differential/Vacuum Gauge

Gauge/Vacuum Gauge

15.0 psi

24PCCFA6D

24PCCFA6G

26PC Series

Differential/Vacuum Gauge

Gauge/Vacuum Gauge

30.0 psi

24PCDFA6D

24PCDFA6G

MEASUREMENT TYPE

Flow Through/Vacuum Gauge 1.0 psi

PRESSURE RANGE REFERENCE

26PCAFG6G

26PCCFG6G

26PCFFG6G

Differential

Gauge

0.5 psi

24PCEFA6D

24PCEFA6G

Flow Through

15.0 psi

100 psi

Gauge/Vacuum Gauge

Differential

Gauge

100 psi

24PCFFA6D

24PCFFA6G

26PC Series

MEASUREMENT TYPE

Differential/Vacuum Gauge

Gauge/Vacuum Gauge

PRESSURE RANGE REFERENCE

1.0 psi

26PCAFA6D

26PCAFA6G

Differential

Gauge

5.0 psi

26PCBFA6D

26PCBFA6G

Differential/Vacuum Gauge

Gauge/Vacuum Gauge

15.0 psi

26PCCFA6D

26PCCFA6G

Differential

Gauge

30.0 psi

26PCDFA6D

26PCDFA6G

Gauge

100 psi

250 psi

26PCFFA6G

26PCGFA6D

Differential

4

www.honeywell.com/sensing

PRESSURE

24PC/26PC Series

(Continued)

24PC/26PC SMT

(Surface Mount Technology) Low Pressure

CPC/CPX Series

Signal conditioning:

Unamplified

Signal conditioning:

Unamplified

compensated - (CPC Series)

Type 2

noncompensated- (24PC SMT Series)

compensated - (26 PC SMT Series)

noncompensated - (CPX Series)

12 Vdc typ.

Supply voltage:

10 Vdc typ.

12 Vdc max. (24PC SMT Series)

16 Vdc max. (26PC SMT Series)

Supply voltage:

16 Vdc max.

Operating temperature:

-25 °C to 85 °C

-13 °F to 185 °F

Barbed

Operating temperature:

-40 °C to 85 °C

-40 °F to 185 °F

Port style:

Termination:

Straight, 1,88 mm Ø (0.74 in)

SMT solder

Termination:

Accuracy grade:

PCB

Commercial (1.0 %)

Measurement type:

Gauge, Vacuum Gauge,

Differential, Wet/Wet Differential

OPTIONS

26PC Series

CPC Series

MEASUREMENT TYPE

Flow Through

PRESSURE RANGE REFERENCE

30.0 psi 26PCDFG2G

MEASUREMENT TYPE

Differential

Gauge

PRESSURE RANGE

REFERENCE

CPCL04DFC

CPCL04GFC

(1.0 psi) 4.0 in H O

2

Type 5

(1.0 psi) 4.0 in H O

2

Differential

(1.0 psi) 10.0 in H O CPCL10DFC

2

CPX Series

OPTIONS

MEASUREMENT TYPE

PRESSURE RANGE

REFERENCE

Differential

4.0 in H O

CPXL04DF

24PC SMT Series

2

Differential

10.0 in H O

CPCL10DF

PRESSURE RANGE

REFERENCE

2

0 psi to 1.0 psi

24PC01SMT

0 psi to 5.0 psi

0 psi to 15.0 psi

24PC05SMT

24PC15SMT

26PC SMT Series

PRESSURE RANGE

REFERENCE

0 psi to 1.0 psi

26PC01SMT

26PC Series

0 psi to 5.0 psi

0 psi to 15.0 psi

26PC05SMT

26PC15SMT

MEASUREMENT TYPE

Flow Through/Vacuum Gauge 100 psi

PRESSURE RANGE REFERENCE

26PCFFU5G

5

www.honeywell.com/sensing

PRESSURE

DC Series, Low Pressure

DCXL/DUXL Series, Low Pressure

Signal conditioning:

Amplified compensated

unregulated (DC001NDC4)

regulated (DC005NDR4)

Signal conditioning:

Unamplified

compensated (DCXL)

noncompensated (DUXL)

12 Vdc typ., 16 Vdc max. (DCXL)

4.5 Vdc min., 8 Vdc max. (DUXL)

-25 °C to 85 °C

Supply voltage:

5 Vdc typ., 5.1 Vdc max. (DC001NDC4)

Supply voltage:

7 Vdc to 35 Vdc (DC005NDR4)

-25 °C to 85 °C

-13 °F to 185 °F

Barbed

Operating temperature:

-13 °F to 185 °F

Port style:

Barbed

Termination:

PCB

Termination:

PCB

OPTIONS

DC001NDC4

DCXL Series

MEASUREMENT TYPE

Differential

PRESSURE RANGE

REFERENCE

DCXL01DN

DCXL10DN

1.0 in H O

MEASUREMENT TYPE

Differential

PRESSURE RANGE

REFERENCE

DC001NDC4

2

10.0 in H O

1.0 in H O

2

DUXL Series

DC005NDR4

MEASUREMENT TYPE

PRESSURE RANGE

REFERENCE

Differential

5.0 in H O

DC005NDR4

2

MEASUREMENT TYPE

Differential

PRESSURE RANGE

REFERENCE

DUXL01D

DUXL10D

1.0 in H O

2

10.0 in H O

2

6

www.honeywell.com/sensing

PRESSURE

XCA Series

XPC Series

Signal conditioning:

Supply voltage:

Operating temperature:

Amplified compensated

5 Vdc typ., 16 Vdc max.

-25 °C to 85 °C

-13 °F to 185 °F

Barbed

Signal conditioning:

Supply voltage:

Operating temperature:

Unamplified compensated

12 Vdc typ., 16 Vdc max.

-25 °C to 85 °C

-13 °F to 185 °F

Barbed

Port style:

Termination:

PCB

Termination:

Accuracy grade:

PCB

Commercial (1.0 %)

MEASUREMENT TYPE

PRESSURE RANGE

REFERENCE

Absolute

15.0 psia

XCA415AN

XCX Series

Signal conditioning:

Supply voltage:

Operating temperature:

Unamplified compensated

12 Vdc typ., 16 Vdc max.

-25 °C to 85 °C

-13 °F to 185 °F

Barbed

Port style:

Termination:

Accuracy grade:

PCB

MEASUREMENT TYPE

Differential

PRESSURE RANGE

1.0 psi

15.0 psi

PORT STYLE

Axial

Radial

REFERENCE

XPC01DFC

XPC15DTC

Commercial (1.0 %)

XSX Series, Low pressure

Signal conditioning:

Supply voltage:

Unamplified uncompensated

12 Vdc typ., 16 Vdc max.

Operating temperature:

Port style:

Termination:

-25 °C to 85 °C [-13 °F to 185 °F]

Button

PCB

Accuracy grade:

Commercial (1.0 %)

MEASUREMENT

TYPE

Differential

PRESSURE

ACCURACY

GRADE

REFERENCE

RANGE

1.0 psi

15.0 psi

XCX01DNC

XCX01DNH

XCX15DNC

High (0.50 %)

MEASUREMENT TYPE

Gauge

PRESSURE RANGE

4.0 in H O

REFERENCE

XSXL04GF

2

7

www.honeywell.com/sensing

PRESSURE

ASDX Series

Signal conditioning:

Supply voltage:

Operating temperature:

Port style:

40PC Series, Miniature Signal

Conditioned

Signal conditioning:

Supply voltage:

Amplified compensated

4.75 Vdc to 5.25 Vdc

-20 °C to 105 °C [-4 °F to 221 °F]

Taper 2,29 mm [0.090 in]

PCB

Amplified

5 Vdc ± 0.25 Vdc

-45 °C to 125 °C

-49 °F to 257 °F

Operating temperature:

Termination:

Accuracy grade:

±2.0 %

Port style:

Termination:

Straight for O-ring interface

PCB, unformed

A2 Package

MEASUREMENT TYPE

Absolute

PRESSURE RANGE

REFERENCE

0 psi to 15 psi

0 psi to 30 psi

0 psi to 100 psi

ASDX015A24R

ASDX030A24R

ASDX100A24R

Absolute

D4 Package

MEASUREMENT TYPE

Bi-Directional Gauge/Vacuum Gauge

PRESSURE RANGE

± 50 MM HG

0 to 300 mm HG

0 to -15.0 psi

15.0 psi

30.0 psi

100 psi

150 psi

250 psi

REFERENCE

40PC001B1A

40PC006G1A

40PC015V1A

40PC015G1A

40PC030G1A

40PC100G1A

40PC150G1A

40PC250G1A

40PC500G1A

Gauge

Vacuum

Gauge

500 psi

MEASUREMENT TYPE

Differential/gauge

PRESSURE RANGE

0 psi to 1 psi

0 psi to 5 psi

0 psi to 15 psi

0 psi to 30 psi

0 psi to 100 psi

REFERENCE

ASDX001D44R

ASDX005D44R

ASDX015D44R

ASDX030D44R

ASDX100D44R

G2 Package

MEASUREMENT TYPE

Guage

PRESSURE RANGE

0 psi to 1 psi

0 psi to 5 psi

0 psi to 15 psi

0 psi to 30 psi

0 psi to 100 psi

REFERENCE

ASDX001G24R

ASDX005G24R

ASDX015G24R

ASDX030G24R

ASDX100G24R

Guage

8

www.honeywell.com/sensing

PRESSURE

140PC Series

160PC Series, Low Pressure

Signal conditioning:

Supply voltage:

Operating temperature:

Amplified

8 Vdc typ., 16 Vdc max.

-40 °C to 85 °C

-40 °F to 185 °F

Straight

Signal conditioning:

Supply voltage:

Operating temperature:

Amplified

8 Vdc typ., 16 Vdc max.

-40 °C to 85 °C

-40 °F to 185 °F

Straight

Port style:

Termination:

PCB

Termination:

PCB

Note: Dimensions shown apply to Differential and Absolute versions.

Gauge units are identical, except the P1 port is absent.

MEASUREMENT

TYPE

Gauge/Vacuum Gauge

PRESSURE

RANGE

-15 psi

TERMINATION

REFERENCE

MEASUREMENT

TYPE

Differential/Vacuum Gauge 0 to 27.68 in H O

PRESSURE

RANGE

SUPPLY

VOLTAGE

REFERENCE

162PC01D

141PC15G

2

Differential/Vacuum Gauge 1.0 psi

142PC01D

142PC01G

Differential/Vacuum Gauge ± 5.0 in H O

163PC01D36

2

Gauge

1.0 psi

Differential/Vacuum Gauge -20 cm to 120 cm H O

163PC01D48

163PC01D61

2

Gauge

2.0 psi

142PC02G

Differential/Vacuum Gauge -20 cm to 120 cm H O

5 Vdc

2

Differential/Vacuum Gauge 5.0 psi

Differential/Vacuum Gauge -39 in H O to 55 in H O

142PC05D

142PC05D97

142PC05G

Differential/Vacuum Gauge ± 2,5 in H O

163PC01D75

164PC01D37

164PC01D76

2

Gauge

5.0 psi

Differential/Vacuum Gauge 10.0 in H O

2

Absolute

Gauge

15 psia

15 psi

142PC15A

142PC15AW95

142PC15G

Differential/Vacuum Gauge 5,0 in H O

2

Leadwire

Differential/Vacuum Gauge ± 2.5 psi

Differential/Vacuum Gauge ± 5.0 psi

143PC03D

143PC05DW

9

www.honeywell.com/sensing

MASS AIRFLOW

Mass Airflow sensors contain a thin-film, thermally isolated bridge structure containing heater and

temperature sensing elements. The bridge structure provides a sensitive and fast response to the flow of

air or other gas over the chip.

Mass Airflow

Sensors

State-of-the-art chip design and manufacturing techniques allow the microbridge to be remarkably

sensitive, fast, small. Used wherever airflow needs to be measured.

Supply voltage:

Operating temperature:

Media compatibility:

8 Vdc to 15 Vdc

-25 °C to 85 °C (-13 °F to 185 °F)

Dry gas only

AWM2000 Series

AWM3000 Series

AWM40000 Series

The AWM2000 Series microbridge mass airflow

sensor is a passive device comprised of two

Wheatstone bridges and has bidirectional sensing

capability. The heater control circuit is required for

operation per specifications. The sensing bridge

supply circuit is also required for operation per

specifications. These two circuits are not on board

the package and must be supplied in the

application. The differential amplifier is a useful

interface for the sensing bridge. It can be used to

introduce gain and to voltage offsets to the sensor

output.

Like the AWM2000 Series, the dual Wheatstone

bridges control airflow measurement. The

AWM3000 Series is amplified; therefore, it can be

used to increase the gain and to introduce voltage

offsets to the sensor output. The heater control

circuit and the sensing bridge supply circuit are on

board the package.

The microbridge mass airflow sensor operates

on the theory of heat transfer. Mass airflow is

directed across the surface of the sensing

elements. Output voltage varies in proportion

to the mass air or other gas flow through the

inlet and outlet ports of the package. The

specially designed housing precisely directs

and controls the airflow across the

Signal conditioning:

Am-

plified (1 Vdc to 5 Vdc)

Straight

microstructure sensing element. Mechanical

design of the package allows it to be easily

mounted to printed circuit boards.

Port style:

The microbridge mass airflow sensor has a

unique silicon chip based on advanced

microstructure technology. It consists of a

thin-film, thermally isolated bridge structure

containing heater and temperature sensing

elements. The bridge structure provides a

sensitive and fast response to the flow of air or

other gas over the chip. Dual sensing elements

positioned on both sides of a central heating

element indicate flow direction as well as flow

rate. Laser trimmed thick film and thin film

resistors provide consistent interchangeability

from one device to the next.

Signal conditioning: Unamplified (-44,5 mVdc to

44,5 mVdc)

Port style:

Sensor resistance:

Straight

5 kOhm

Port style:

Manifold

FLOW/PRESSURE RANGE

± 200 sccm

REFERENCE

AWM3100V

AWM3200V

AWM3300V

+ 2.0 in H 0 (5 mBar)

2

± 1000 sccm (1 SLPM)

FLOW/PRESSURE RANGE

± 200 sccm

REFERENCE

AWM2100V

AWM2200V

AWM2300V

± 4.0 in H O (10 mBar)

2

± 1000 sccm (1 SLPM)

SIGNAL

FLOW/

REFERENCE

CONDITIONING

PRESSURE RANGE

Unamplified (8.5 mV) ± 25 sccm

AWM42150VH

Unamplified (54.7 mV) ± 1000 sccm (1 SLPM) AWM42300V

Amplified

(1 Vdc to 5 Vdc)

Amplified

± 1000 sccm (1 SLPM) AWM43300V

+ 6 SLPM AWM43600V

(1 Vdc to 5 Vdc)

10

www.honeywell.com/sensing

MASS AIRFLOW

AWM5000 Series - High flow

AWM5000 Series Microbridge Mass Airflow Sensors feature a Venturi type flow housing. They

measure flow as high as 20 standard liters per minute (SLPM) while inducing a maximum pressure

drop of 2.25 inches H O. The microbridge chip is in direct contact with the flow stream, greatly

2

reducing error possibilities due to orifice or bypass channel clogging.

The rugged plastic package has been designed to withstand common mode pressures up to 50

psi, and the small sensing element allows 100 g of shock without compromising performance. The

included “AMP” compatible connector provides reliable connection in demanding applications.

Each AWM5000 sensor contains circuitry which performs amplification, linearization, temperature

compensation, and gas calibration. A 1 to 5 Vdc linear output is possible for all listings regardless of flow

range (5, 10, 15, or 20 SLPM) or calibration gas (nitrogen, carbon dioxide, nitrous oxide, or argon). All

calibration is performed by active laser.

Signal conditioning:

Port style:

Amplified (1 Vdc to 5 Vdc)

Threaded, ¼¨ NPT

FLOW/PRESSURE RANGE

REFERENCE

0 SLPM to 5 SLPM (N calibration)

AWM5101VN

AWM5102VN

AWM5104VC

AWM5104VN

2

0 SLPM TO 10 SLPM (N calibration)

2

0 SLPM to 20 SLPM (CO calibration)

2

0 SLPM to 20 SLPM (N calibration)

2

AWM700 Series

AWM700 Series microbridge mass airflow sensors provide in-line flow measurement with a specially

designed bypass flow housing. The sensors measure flow as high as 200 standard liters per minute

(SLPM) while inducing a pressure drop of 1 inch H O, typically. The AWM700 has a high flow range

2

capability in a small package.

Signal conditioning:

Port style:

Amplified (1 Vdc to 5 Vdc)

Tapered, 22 mm

CAUTION

PRODUCT DAMAGE

AWM Series Microbridge Mass Airflow

Sensors are not designed to sense

liquid flow and will be damaged by

liquid flow through the sensor.

Failure to comply with these

instructions could result in product

FLOW/PRESSURE RANGE

+ 200 SLPM

REFERENCE

AWM720P1

11

www.honeywell.com/sensing

MASS AIRFLOW

AWM90000 Series

NOTICE

The AWM90000 Series microbridge mass airflow sensors are available in

two versions, mass flow and differential pressure. The AWM92100V has

a flow range of ±200 sccm with a pressure drop of only 0.49 mBar,

typically. The AWM92200V is a differential pressure version that has a

LAMINAR FLOW

Due to the fast response time of the sensor, these

specifications were generated using laminar flow. Airflow

instability or “turbulence” present in the airstream will

result in an increase in measurement uncertainty.

range of ±2 in H O.

2

The AWM90000 Series has a 1 ms response time, operates with a

supply voltage from 8.0 Vdc to 15.0 Vdc, while consuming only 50 mW

of power. The compact plastic package will withstand a maximum

overpressure of 25 psi without compromising performance.

The turbulent flow problem can be corrected by either

straightening the airflow using flow laminarizing or by

slowing the response of the sensor using a simple RC

time constant on the output of the sensor. This, of course,

slows down the sensor response time. The values needed

depend on the amount of turbulence present in the

application.

Signal Conditioning:

Port Style:

Unamplified

Straight

Several techniques for laminarizing the flow include

adding hex shaped honeycombs, foam, screen materials

or adding constrictors (frits) to the flow stream. There are

various commercial laminar flow elements that can be

purchased. Unfortunately the greater the efficiency of the

laminarizer, the greater the increase in pressure drop in

order to establish a given flow rate. Plastic honeycomb

material probably gives the most improvement for the

least pressure drop. In any test fixture, the avoidance of

sharp radii is an absolute requirement.

FLOW RANGE (FULL SCALE)

±200 sccm

—

PRESSURE RANGE

—

REFERENCE

AWM92100V

AWM92200V

±2.0 H O (5 mBar)

2

CAUTION

PRODUCT DAMAGE

AWM Series Microbridge Mass Airflow

Sensors are not designed to sense

liquid flow and will be damaged by

liquid flow through the sensor.

Failure to comply with these

instructions could result in product

12

www.honeywell.com/sensing

FORCE

Force sensors operate on the principle that the resistance of silicon implanted piezoresistors will increase when

the resistors flex under any applied force. The sensor concentrates force from the application, through the

stainless steel plunger, directly to the silicon sensing element. The amount of resistance changes in proportion

to the amount of force being applied. This change in circuit resistance results in a corresponding mV output

level.

Force Sensors

FSG Series

FSL Series

Plunger actuator - Force range 1500 g

Ball bearing actuator - Force range 500 g

Supply voltage:

360 mV span @ 10 Vdc

Supply voltage:

60 mV span @ 5 Vdc

Operating temperature:

-40 °C to 85 °C

-40 °F to 185 °F

Operating temperature:

-40 °C to 85 °C

-40 °F to 185 °F

Sensitivity:

Overforce:

0.20 mV/g min., 0.24 mV/g typ., 0.28 mV/g max.

5500 g

Sensitivity:

Overforce:

0.10 mV/g min., 0.12 mV/g typ., 0.14 mV/g max.

4500 g

REFERENCE

Non-compensated

FSG15N1A

Non-compensated

FSL05N2C

13

www.honeywell.com/sensing

FORCE

Model 1865 Force/Pressure Transducer

The Model 1865 is a high-performance transducer specifically designed

to address the needs of medical and specialized OEM applications.

Offering laser-trimmed compensation, the Model 1865 may be specified

to operate with either a constant current or voltage supply.

The Model 1865 employs a solid state piezoresistive pressure

transducer mounted in a plastic package. For applications where force is

applied by a flexible membrane to the sensor, such as found in infusion

pumps, the Model 1865’s precision height silicone diaphragm provides

long life and is a reliable replacement for older force or load cell

transducers. Utilizing a silicon rubber diaphragm, the 1865 is compatible

with some liquid media applications. The Model 1865 may be operated

in either current or voltage excitation, and its output may be amplified or

signal conditioned, as required. The semiconductor-based sensor offers

high resolution using its Wheatstone Bridge strain gauge design. The

height of the unit’s patented, poured-in-place silicon rubber diaphragm

is controlled to ensure sensitivity to low pressure. This diaphragm is

bonded to a plastic header and transmits force applied through a special

silicone gel to the diaphragm of a silicon peizoresistive die. The back of

the die is exposed to atmospheric pressure, which results in a gauge

pressure output.

Pressure over-range protection: 3X span or 60 psi, whichever is least

Media/materials compatibility

Top side:

Room atmosphere, directly applied force, and liquids

compatible with dimethyl silicon, polyetherimide (Ultem)

Non-corrosive dry gasses and fluids compatible with

silicon, pyrex, RTV silicone, and ceramic

Gauge pressure

Bottom side:

Sensor:

Diaphragm:

Compensation:

Dimethyl silicone

Laser trimmed normalised output

OPTIONS

Excitation 1.5 mA

PRESSURE

REFERENCE

0 psi to 5 psi

0 psi to 10 psi

0 psi to 15 psi

0 psi to 25 psi

0 psi to 30 psi

1865-01G-L-N

1865-02G-L-N

1865-03G-L-N

1865-04G-L-N

1865-05G-L-N

Excitation 10 Vdc

PRESSURE

REFERENCE

0 psi to 5 psi

0 psi to 10 psi

0 psi to 15 psi

0 psi to 25 psi

0 psi to 30 psi

1865-01G-K-N

1865-02G-K-N

1865-03G-K-N

1865-04G-K-N

1865-05G-K-N

14

www.honeywell.com/sensing

HUMIDITY

Relative Humidity/Temperature and Relative Humidity sensors are configured with integrated circuitry to provide

on-chip signal conditioning. These sensors contain a capacitive sensing die set in thermoset polymers that

interacts with platinum electrodes. The laser trimmed sensors have an interchangeability of + 5%RH, with stable,

low drift performance.

Humidity

Sensors

Absorption based humidity sensors provide both temperature and %RH (Relative Humidity) outputs. On-chip signal

processing ensures linear voltage output versus %RH. Sensor laser trimming offers + 5%RH accuracy, and achieves

2%RH accuracy with calibration. Packages are chemically resistant and operate in ranges of -40 °C to 85 °C (-40 °F to

185 °F) to accommodate harsh environments.

Supply voltage:

Operating humidity range:

Operating temperature range:

4.0 Vdc to 5.8 Vdc

0 to 100% RH, non-condensing

-40 °C to 85 °C (-40 °F to 185 °F)

HIH Series

OPTIONS

HIH-3610 Monolithic integrated circuit

HIH-3602 Monolithic integrated circuit

HIH-3602-A and HIH-3602-C Relative Humidity (RH) sensors combine both

relative humidity and temperature sensing in a TO-5 housing with a

hydrophobic sintered stainless steel filter.

The HIH-3610 humidity sensor is designed specifically for high volume OEM

(Original Equipment Manufacturer) users. Direct input to a controller or other

device is made possible by this sensor’s linear voltage output. With a typical

current draw of only 200 µA, the HIH-3610 is ideally suited for low drain,

battery powered systems. Tight sensor interchangeability reduces or

eliminates OEM production calibration costs. Individual sensor calibration data

is available.

The temperature sensor is thermally connected with the RH sensor making the

HIH-3602-A/C ideal for measuring dew point and other absolute moisture

terms.

Package style:

Termination:

TO-5 can

0,46 mm (0.18 in)

The HIH-3610 delivers instrumentation quality RH sensing performance in a

low cost, solderable SIP (Single In-line Package). Available in two lead spacing

configurations, the RH sensor is a laser trimmed thermoset polymer capacitive

sensing element with on-chip integrated signal conditioning.

Nist Certification:

NIST Calibration sensor-specific printout

Package style:

Solderable SIP

4,27

(0.168)

4,27

(0.168)

2,03

(0.080)

9,47

(0.373)

9,47

(0.373)

1,90

(0.075)

12,19 MIN

(0.480)

12,70 MIN

(0.50)

TEMPERATURE SENSOR

100 kOhm ± 5 % @ 25 °C, NTC 0-50 C

1000 Ohm ± 0.2 % @ 0 °C, platinum RTD

REFERENCE

HIH-3602-A

HIH-3602-C

-

+

OUT

-

3X 0,38

(0.015)

+

OUT

2,54

(0.100)

3X 0,38

(0.015)

5,08

(0.200)

1,27

(0.050)

2,54

(0.100)

HIH-3602-L Integrated circuit

The HIH-3602-L Relative Humidity (RH) sensor delivers instrumentation

quality RH sensing performance in a rugged, low cost, slotted TO-39 housing.

On-board signal conditioning reduces product development times while a

typical current draw of only 200 µA makes the HIH-3602-L perfect for

battery powered systems. This sensor should be shielded from bright

light.

TERMINATION

NIST CERTIFICATION

None

NIST Calibration sensor-specific printout HIH-3610-003

NIST Calibration sensor-specific printout HIH-3610-004

REFERENCE

HIH-3610-001

HIH-3610-002

2,54 mm (0.100 in) Lead Pitch

1,27 mm (0.050 in) Lead Pitch

2,54 mm (0.100 in) Lead Pitch

1,27 mm (0.050 in) Lead Pitch

Package style:

Termination:

T0-39 can

0,46 mm (0.18 in)

None

Nist Certification:

CAUTION

PRODUCT DAMAGE

The inherent design of this component causes it to be

sensitive to the electrostatic discharge (ESD). To prevent

ESD-induced damage and/or degradation, take normal ESD

precautions when handling this product.

Failure to comply with these instructions could result in

product damage

REFERENCE

HIH-3602-L

15

www.honeywell.com/sensing

TEMPERATURE - RTDS

Honeywell’s thin film RTD (Resistance Temperature Detector) temperature sensors feature two distinct series.

These sensors are laser trimmed for accuracy and interchangeability. Linear outputs are stable and fast.

Temperature

Sensors -

RTDs

The TD Series Temperature Sensors are silicon-based RTDs. They offer 2000 Ohm nominal resistance at 20 °C.

Temperature range of -40 °C to 150 °C.

The HEL Series Temperature Sensors are platinum RTDs, offering 100 Ohm or 1000 Ohm versions and temperature

ranges of -200 °C to 540 °C.

HEL-700 Series

100/1000 Ohm platinum RTD

Supply voltage:

Base resistance

and interchangeability:

4 Vdc to 9 Vdc

1000 ± 2 Ohm (± 0.2 %) @ 0 °C (Standard)

1000 ± 1 Ohm (± 0.1 %) @ 0 °C (Optional)

100 Ohm

(0.00385 Ohm/Ohm/°C DIN standard)

PACKAGING STYLE

Type A

BASE RESISTANCE AND INTERCHANGEABILITY

Standard

Optional

REFERENCE

HEL-700-T-0-A

HEL-700-T-1-A

OPTIONS

HEL-700

Temperature range:

Type B

Standard

Optional

HEL-700-T-0-B

HEL-700-T-1-B

-200 °C to 540 °C

-300 °F to 1000 °F

Packaging style/Termination:

Radial chip/ribbon leads (Type A)

Radial chip/no leads (Type B)

SMT (Axial) flip chip/no leads (Type C)

1000 Ohm

(0.00375 Ohm/Ohm/°C)

PACKAGING STYLE

Type A

BASE RESISTANCE AND INTERCHANGEABILITY

Standard

Optional

REFERENCE

HEL-700-U-0-A

HEL-700-U-1-A

Type A

Type B

Standard

Optional

HEL-700-U-0-B

HEL-700-U-1-B

Type C

Standard

Optional

HEL-700-U-0-C

HEL-700-U-1-C

Type B

Centre lead

not connected

Type C

CAUTION

PRODUCT DAMAGE

The inherent design of this component causes it to be

sensitive to the electrostatic discharge (ESD). To prevent

ESD-induced damage and/or degradation, take normal ESD

precautions when handling this product.

Failure to comply with these instructions could result in

product damage

16

www.honeywell.com/sensing

TEMPERATURE- RTDS

HEL-700 Series

TD Series

100/1000 Ohm platinum RTD (Continued)

2000 Ohm silicon RTD

Supply voltage:

Temperature range:

10 Vdc

-40 °C to 150 °C

-40 °F to 302 °F

HEL-705/707/711/712/716/717

Temperature range:

HEL-705/711/716

-200 °C to 260 °C

-320 °F to 500 °F

-75 °C to 540 °C

-100 °F to 1000 °F

Ceramic case

HEL-707/712/717

OPTIONS

Packaging style:

Termination:

NIST calibration:

TD4A Liquid temperature sensor

12 in leadwires

None

PACKAGING STYLE

TERMINATION

REFERENCE

Threaded aluminium case

Leadwires

TD4A

TD5A Subminiature temperature sensor

100 Ohm

(0.00385 Ohm/Ohm/°C DIN standard)

BASE RESISTANCE AND INTERCHANGEABILITY

REFERENCE

Standard

Optional

HEL-705-T-0-12-00

HEL-705-T-1-12-00

Standard

Optional

HEL-707-T-0-12-00

HEL-707-T-1-12-00

Standard

Optional

HEL-711-T-0-12-00

HEL-711-T-1-12-00

Standard

Optional

HEL-712-T-0-12-00

HEL-712-T-1-12-00

PACKAGING STYLE

TERMINATION

REFERENCE

Plastic case

SIP

TD5A

Standard

Optional

HEL-716-T-0-12-00

HEL-716-T-1-12-00

Standard

Optional

HEL-717-T-0-12-00

HEL-717-T-1-12-00

1000 Ohm

(0.00375 Ohm/Ohm/°C)

BASE RESISTANCE

AND INTERCHANGEABILITY

Standard

NIST CALIBRATION

REFERENCE

HEL-705-U-0-12-00

HEL-705-U-1-12-00

Optional

Standard

Optional

HEL-707-U-0-12-00

HEL-707-U-1-12-00

Standard

Optional

HEL-711-U-0-12-00

HEL-711-U-1-12-00

Standard

Optional

HEL-712-U-0-12-00

HEL-712-U-1-12-00

Standard

Optional

HEL-716-U-0-12-00

HEL-716-U-1-12-00

HEL-716-U-1-12-C2

NIST @ 0 and 100 °C

Standard

Optional

HEL-717-U-0-12-00

HEL-717-U-1-12-00

17

www.honeywell.com/sensing

TEMPERATURE - THERMISTORS

Temperature Sensors -

Thermistors

Thermistors change resistance with a change in temperature. They do

not amplify, rectify, polarize or generate a signal. The thermistor

temperature may be changed by the surrounding temperature or by

self-heating the thermistor by passing a current through it.

Most applications such as temperature measurement and control or

copper coil compensation require that the power dispersed in a

thermistor be kept to a minimum so as not to perceptibly self-heat the

thermistor. Other applications depend entirely on the self-heating effect.

When the surrounding temperature is fixed, the resistance of a thermistor

is largely a function of power being dispersed within it, raising its

temperature above its environment. Under these operating conditions,

the temperature may rise 100 °C to 200 °C [121 °F to 392 °F] and the

resistance may be lowered to 1/1000^thof its original value at low current.

This self-heating characteristic provides a whole field of uses for the

thermistor. In the self-heat state it is thermally sensitive (its resistance will

be changed) to any condition, changing the rate at which heat is

conducted away from it. If the rate of heat removal is ideally fixed, then

the thermistor is sensitive to power input and suited for use in voltage or

power level control applications.

Glass Encapsulated Chip (GEC)

Thermistors

OPTIONS

At 25 °C [77 °F]

The GECs are high-quality, hermetically-sealed, glass-encapsulated chip

thermistors in an axial lead package. They cover the full temperature

range of -60 °C to 300 °C [-76 °F to 572 °F]. These rugged sensors are

designed for applications which demand reliability at low cost. The

uniform dimensions are ideally suited for automated assembly.

OHM

1,000

2,000

3,000

5,000

% TOLERANCE

R/T CURVE

REFERENCE

10

5

10

5

10

5

10

5

10

5

10

10A

10

16

1

135-102DAG-J01

135-202FAG-J01

135-302FAG-J01

135-502FAF-J01

135-502FAG-J01

135-103FAF-J01

135-103FAG-J01

135-103LAF-J01

135-203LAG-J01

135-303KAG-J01

135-503LAF-J01

135-503LAG-J01

135-104LAF-J01

135-104LAG-J01

135-204QAG-J01

135-504QAG-J01

135-105QAG-J01

5,000

10,000

20,000

30,000

50,000

100,000

200,000

500,000

1 M

Operating temperature:

Encapsulation:

-60 °C to 300 °C [-76 °F to 572 °F]

DO-35 glass

Lead material:

Dissipation constant (DC):

Time constant (TC):

Tinned copper-clad steel

2.5 mW/°C in still air min.

4 s in still air max.

Resistance range at 25 °C [77 °F]:

1 kOhm to 1 MOhm

1

CHIP

Interchangeable R/T curve matched

±1 °C from 0 °C to 100 °C [32 °F to 212 °F]

THERMISTOR

2,0 DIA.

[0.08]

GLASS

ENCAPSULATION

28,6

[1.125]

OHM

10,000

20,000

30,000

50,000

100,000

R/T CURVE

REFERENCE

16

135-103LFW-J01

135-203LFW-J01

135-303LFW-J01

135-503LFW-J01

135-104LFW-J01

4,6

[0.81]

0,51 DIA. TINNED COPPER CLAD STEEL

[0.020]

18

www.honeywell.com/sensing

TEMPERATURE - THERMISTORS

Uncoated chip

Epoxy-coated or Uncoated Chip

Thermistors

0,76 MAX

[0.030]

Epoxy-coated or Uncoated Chip thermistors are available in a broad

range of custom resistance values and R/T curves. They are also

available in two lead types:

• Uninsulated: 0,2032 mm [0.008 in] diameter, tinned copper for

1 kOhm or less, and tinned copper alloy for greater than 1 kOhm.

1,40 ±0,51

[0.055 ±0.020]

1,40 ±0,51

[0.055 ±0.020]

• Insulated: 0,254 mm [0.010 in] diameter, nickel wire, Teflon-insulated,

38,1 mm [1.5 in] long and furnished with 6,35 mm [0.25 in] stripped

ends of 0,4064 mm [0.016 in] and 0,508 mm [0.020 in] tin-plated

copper leads.

10 % Tolerance at 25 °C [77 °F], uninsulated leads

OHM

100

R/T CURVE

REFERENCE

17

10A

16

18

1

195-101CAG-A01

195-301CAG-A01

195-501DAG-A01

195-102DAG-A01

195-202LAG-A01

195-302LAG-A01

195-502LAG-A01

195-103LAG-A01

195-203LAG-A01

195-303KAG-A01

195-503QAG-A01

195-104QAG-A01

300

500

Operating temperature range: -40 °C to 125 °C* [-40 °F to 257 °F]*

1,000

2,000

3,000

5,000

10,000

20,000

30,000

50,000

100,000

Encapsulation:

Lead material:

Epoxy-coated or uncoated

• Uninsulated: tinned copper/copper alloy

• Insulated: tinned copper/copper alloy

with nickel wire Teflon

Dissipation constant (DC):

Time constant (TC):

0.75 mW/°C in still air min.

15 s in still air max.

1

Resistance range at 25 °C [77 °F]:

100 Ohm to 100 kOhm

*Very accurate (±0.2 °C) when used between 0 °C to 70 °C [32 °F to

158 °F]. Other ranges and tolerances are available.

10 % Tolerance at 25 °C [77 °F], insulated leads

OPTIONS

OHM

100

R/T CURVE

REFERENCE

17

10A

16

18

1

198-101CAG-A01

198-301CAG-A01

198-501DAG-A01

198-102DAG-A01

198-202LAG-A01

198-302LAG-A01

198-502LAG-A01

198-103LAG-A01

198-203LAG-A01

198-303KAG-A01

198-503QAG-A01

198-104QAG-A01

Epoxy-coated chip

300

500

38,1

[1.50]

1,000

2,000

3,000

5,000

10,000

20,000

30,000

50,000

100,000

2,54 MAX

[0.10]

1

10 % Tolerance at 25 °C [77 °F], uninsulated leads

OHM

100

300

R/T CURVE

REFERENCE

17

10A

16

18

1

197-101CAG-A01

197-301CAG-A01

197-501DAG-A01

197-102DAG-A01

197-202LAG-A01

197-302LAG-A01

197-502LAG-A01

197-103LAG-A01

197-203LAG-A01

197-303KAG-A01

197-503QAG-A01

197-104QAG-A01

500

1,000

2,000

3,000

5,000

10,000

20,000

30,000

50,000

100,000

1

10 % Tolerance at 25 °C [77 °F], insulated leads

OHM

100

300

R/T CURVE

REFERENCE

17

10A

16

18

1

199-101CAG-A01

199-301CAG-A01

199-501DAG-A01

199-102DAG-A01

199-202LAG-A01

199-302LAG-A01

199-502LAG-A01

199-103LAG-A01

199-203LAG-A01

199-303KAG-A01

199-503QAG-A01

199-104QAG-A01

500

1,000

2,000

3,000

5,000

10,000

20,000

30,000

50,000

100,000

1

19

www.honeywell.com/sensing

TEMPERATURE - THERMISTORS

Disc Thermistors

UNI-CURVE Interchangeable Thermistors

Uncoated or epoxy-coated Disc thermistors are available in a broad

range of custom resistance values and R/T curves. They are only

available with uninsulated leads. Diameters range from 2,54 mm [0.1 in]

to 10,16 mm [0.4 in]. They are ideally suited for low cost applications

with a maximum temperature of 150 °C [302 °F]. They are also well

suited for PC board mount and are available on tape and reel.

The UNI-CURVE Interchangeable thermistors are temperature-matched.

They offer additional cost savings by eliminating the need for individual

resistance temperature calibration, as well as standardization of circuit

components and simplification of design and replacement problems.

Operating temperature range:

Encapsulation:

-40 °C to 150 °C* [-40 °F to 302 °F]*

Epoxy-coated

Operating temperature range:

Encapsulation:

Lead material:

-60 °C to 150 °C [-76 °F to 302 °F]

Epoxy-coated or uncoated

Uninsulated: tinned copper/copper alloy

Varies with size,

Lead material:

Dissipation constant (DC):

Time constant (TC):

Tinned copper alloy

0.75 mW/°C in still air min.

15 s in still air max.

Dissipation constant (DC):

Resistance range at 25 °C [77 °F]:

1 kOhm to 100 kOhm

ranges from 3 mW/°C to 8 mW/°C

Varies with size,

*Very accurate (±0.2 °C) when used between 0 °C to 70 °C [32 °F to

158 °F]. Other ranges and tolerances are available.

Time constant (TC):

ranges from 10 s to 32 s

Resistance range at 25 °C [77 °F]:

100 Ohm to 100 kOhm

38,1

[1.50]

OPTIONS

2,4

[0.095]

Epoxy-coated chip

6,35

[0.25]

0,2032 DIA. TINNED COPPER ALLOY

[0.008]

OPTIONS

38,1

[1.50]

±0,2 °C Tolerance at 25 °C [77 °F]

0 °C to 70 °C [32 °F to 158 °F]

OHM

1,000

2,252

3,000

5,000

10,000

30,000

50,000

100,000

R/T CURVE

REFERENCE

10A

16

18

1

192-102DET-A01

192-222LET-A01

192-302LET-A01

192-502LET-A01

192-103LET-A01

192-303KET-A01

192-303QET-A01

192-503QET-A01

192-104QET-A01

LEAD SPACING

10 % Tolerance at 25 °C [77 °F]

Lead diameter 0,4064 mm [0.016 in]

Lead spacing 2,54 mm [0.1 in]

1

OHM

500

1,000

3,000

5,000

10,000

50,000

100,000

R/T CURVE

DC MIN.

TC MAX.

10

REFERENCE

10

16

1

3

4

3

4

3

140-501FAG-RB1

140-102FAG-RB1

140-302LAG-RB1

140-502LAG-RB1

140-103LAG-RB1

140-503QAG-RB1

140-104QAG-RB1

±0,5 °C Tolerance at 25 °C [77 °F]

0 °C to 70 °C [32 °F to 158 °F]

OHM

1,000

2,252

3,000

5,000

10,000

30,000

50,000

100,000

R/T CURVE

REFERENCE

1

10A

16

18

1

192-102DEV-A01

192-222LEV-A01

192-302LEV-A01

192-502LEV-A01

192-103LEV-A01

192-303KEV-A01

192-303QEV-A01

192-503QEV-A01

192-104QEV-A01

10 % Tolerance at 25 °C [77 °F]

Lead diameter 0,508 mm [0.020 in]

Lead spacing 5,08 mm [0.2 in]

1

OHM

100

200

R/T CURVE

DC MIN.

TC MAX.

16

18

20

22

35

20

25

REFERENCE

10

16

1

4

5

6

7

4

6

7

143-101FAG-RC1

143-201FAG-RC1

143-501FAG-RC1

143-102LAG-RC1

143-302LAG-RC1

143-502LAG-RC1

143-103QAG-RC1

143-303QAG-RC1

143-503QAG-RC1

±1,0 °C Tolerance at 25 °C [77 °F]

0 °C to 70 °C [32 °F to 158 °F]

300

1,000

3,000

5,000

10,000

30,000

50,000

OHM

1,000

2,252

3,000

5,000

10,000

30,000

50,000

100,000

R/T CURVE

REFERENCE

10A

16

18

1

192-102DEW-A01

192-222LEW-A01

192-302LEW-A01

192-502LEW-A01

192-103LEW-A01

192-303KEW-A01

192-303QEW-A01

192-503QEW-A01

192-104QEW-A01

1

30

1

20

www.honeywell.com/sensing

TEMPERATURE - THERMISTORS

Uncoated chip

Standard Bead Thermistors

2,54

[0.10]

Standard Bead thermistors are hermetically-sealed in glass. These small

units provide maximum stability when used to 300 °C [572 °F] for high

temperature design requirements. They are ideally suited for the most

stringent military, aerospace and oceanographic applications.

38,1

[1.50]

Operating temperature range:

Encapsulation:

-60 °C to 300 °C [-76 °F to 572 °F]

Glass hermetic seal

Lead material:

Platinum iridium

Dissipation constant (DC):

Time constant (TC):

0.4 mW/°C in still air min.

4 s in still air max.

Resistance range at 25 °C [77 °F]:

200 Ohm to 1 MOhm

LEAD SPACING

OPTIONS

10 % Tolerance at 25 °C [77 °F]

Lead diameter 0,4064 mm [0.016 in]

Lead spacing 2,54 mm [0.1 in]

Adjacent leads

2,29

[0.09]

9,5

[0.375]

1,14 DIA.

[0.045]

OHM

500

1,000

3,000

5,000

10,000

50,000

100,000

R/T CURVE

DC MIN.

TC MAX.

10

REFERENCE

10

16

1

3

4

3

4

3

142-501FAG-RB1

142-102FAG-RB1

142-302LAG-RB1

142-502LAG-RB1

142-103LAG-RB1

142-503QAG-RB1

142-104QAG-RB1

0,1016 DIA.

[0.004]

20 % Tolerance at 25 °C [77 °F]

1

OHM

200

1,000

2,000

5,000

10,000

20,000

50,000

100,000

200,000

500,000

1 M

R/T CURVE

RATIO 0 °C/50 °C

4.80

7.04

7.59

9.11

9.53

10.45

11.78

13.12

REFERENCE

8

11

12

13

14

15

4

112-201BAJ-B01

112-102EAJ-B01

112-202EAJ-B01

112-502EAJ-B01

112-103FAJ-B01

112-203HAJ-B01

112-503JAJ-B01

112-104KAJ-B01

112-204KAJ-B01

112-504NAJ-B01

112-105PAJ-B01

10 % Tolerance at 25 °C [77 °F]

Lead diameter 0,508 mm [0.020 in]

Lead spacing 5,08 mm [0.2 in]

OHM

100

200

300

500

1,000

3,000

5,000

10,000

30,000

50,000

R/T CURVE

DC MIN.

TC MAX.

16

18

20

25

20

22

35

20

REFERENCE

10

16

1

4

5

6

7

4

7

8

145-101FAG-RC1

145-201FAG-RC1

145-301FAG-RC1

145-501FAG-RC1

145-102LAG-RC1

145-302LAG-RC1

145-502LAG-RC1

145-103QAG-RC1

145-303QAG-RC1

145-503QAG-RC1

5

Axial leads

1

28

32

0,1016 DIA.

[0.004]

1,14 DIA

[0.045]

2,29

[0.090]

9,5

[0.375]

20 % Tolerance at 25 °C [77 °F]

OHM

2,000

5,000

10,000

100,000

600,000

R/T CURVE

RATIO 0 °C/50 °C

7.04

7.59

10.45

11.78

REFERENCE

11

12

15

4

112-202EAJ-H01

112-502EAJ-H01

112-103FAJ-H01

112-104KAJ-H01

112-604NAJ-H01

21

www.honeywell.com/sensing

TEMPERATURE - THERMISTORS

Small Bead Thermistors

Glass Probe Thermistors

Small Bead thermistors feature relatively uniform size, offer ultra-fast time

response and are highly sensitive to electric power. They are ideally

suited for use in low heat capacity applications and their micro size

makes them perfect for use in extremely small assemblies such as

catheters and hypodermic needles. They are also used in self-heat

applications such as gas analysis, gas flow measurement and thermal

conductivity analysis.

Glass Probe thermistors are shock resistant, rugged, glass-encapsulated

units that are ideally suited for immersion in fluid and convenient for

mounting in air sensor assemblies. They are available in two

configurations: standard and mini.

Operating temperature range:

Encapsulation:

-60 °F to 300 °C [-72 °F to 572 °F]

Glass

Lead material:

Dissipation constant (DC):

Dumet (copper-clad Ni-Fe wire)

• Standard: 1.0 mW/°C in still air min.

• Mini: 0.7 mW/°C in still air min.

• Standard: 22 s in still air max.

• Mini: 10 s in still air max.

1 kOhm to 10 MOhm

Operating temperature range:

Encapsulation:

-60 °C to 300 °C [-76 °F to 572 °F]

Glass hermetic seal

Lead material:

Platinum iridium

Time constant (TC):

Dissipation constant (DC):

Time constant (TC):

0.1 mW/°C in still air min.

1 s in still air max.

Resistance range at 25 °C [77 °F]:

2 kOhm to 100 kOhm

OPTIONS

Standard

OPTIONS

Adjacent leads

50,8

[2.00]

12,7

[0.50]

2,51

[0.020]

9,5

[0.375]

2,54

[0.10]

0,36 DIA.

[0.014]

0,3048 DIA. DUMET

[0.012]

0,0254 DIA.

[0.001]

20 % Tolerance at 25 °C [77 °F]

At 25 °C [77 °F]

dc 1.0 mW/°C min., TC 22 s max.

OHM % TOLERANCE R/T CURVE RATIO 0 °C/50 °C [32 °F/122 °F]

REFERENCE

2,000

8,000

30,000

25

20

25

9

11

5.50

7.04

111-202CAK-B01

111-802EAJ-B01

111-303EAK-B01

OHM

1,000

2,000

R/T CURVE

RATIO

7.04

7.59

REFERENCE

11

12

14

15

4

121-102EAJ-Q01

121-202EAJ-Q01

121-502EAJ-Q01

121-103FAJ-Q01

121-502JAJ-Q01

121-104KAJ-Q01

121-202KAJ-Q01

121-504NAJ-Q01

121-105PAJ-Q01

121-106QAJ-Q01

5,000

10,000

50,000

100,000

200,000

500,000

1 M

9.53

Axial leads

10.45

11.89

13.12

15.65

5

6

10 M

0,0254 DIA.

[0.001]

0,36 DIA

[0.014]

Mini

0,51

[0.020]

9,5

[0.375]

12,7

[0.50]

31,5

[1.25]

1,5

[0.06]

At 25 °C [77 °F]

0,2032 DIA. DUMET

[0.008]

OHM % TOLERANCE R/T CURVE RATIO 0 °C/50 °C [32 °F/122 °F]

REFERENCE

2,000 25

8,000 20

10,000 20

100,000 25

9

11

13

5.50

7.04

9.11

111-202CAK-H01

111-802EAJ-H01

111-103EAJ-H01

111-104HAK-H01

20 % Tolerance at 25 °C [77 °F]

dc 0.7 mW/°C min., TC 10 s max.

OHM

1,000

2,000

10,000

50,000

100,000

R/T CURVE

RATIO

7.04

7.59

9.53

REFERENCE

11

12

14

15

120-102EAJ-Q01

120-202EAJ-Q01

120-103FAJ-Q01

120-502JAJ-Q01

120-104KAJ-Q01

10.45

22

www.honeywell.com/sensing

TEMPERATURE - THERMISTORS

E-I Matched Bead Thermistors

ICL Inrush Current Limiter Thermistors

E-I Matched Bead thermistors are designed for use in gas

chromatography and other thermal conductivity gas analysis

instruments. Each bead is mounted to a special hermetically-sealed

header. For maximum sensitivity, the higher resistance units should be

used at higher ambient temperatures.

ICL Inrush Current Limiter thermistors are a cost-effective way of limiting

the inrush of current that may damage components in a switching

power supply and in other power devices when the equipment is turned

on. These devices have solderable leads and are PC board mountable.

Operating temperature range:

Maximum steady state current:

Encapsulation:

Lead material:

Dissipation constant (DC):

Time constant (TC):

-40 °C to 185 °C [-40 °F to 365 °F]

1 A to 30 A

Operating temperature range:

Encapsulation:

Lead material:

-60 °C to 300 °C [-76 °F to 572 °F]

Glass hermetic seal

Black silicone

Tinned copper

12.7 mW/°C to 23 mW/°C

32 s to 93 s

0.5 Ohm to 220 Ohm ±20 %

Tinned Ni-Fe

THERMISTOR

BEAD

12,7

[0.50]

Resistance range at 25 °C [77 °F]:

Resistance at max. steady state current:

0.01 Ohm to 2.34 Ohm

Max. diameter

Max. thickness

Lead diameter

9,5 mm [0.374 in] to 32.0 mm [1.260 in]

5,0 mm [0.204 in] to 8.0 mm [0.327 in]

0,8 mm [0.032 in] to 1.0 mm [0.040 in]

9,65

[0.38]

31,75

[1.25]

0,76 DIA.TINNED Ni-Fe

[0.03]

THICKNESS

DIA.

OPTIONS

Helium-matched assembly

Characteristics

115-802EDJ-801

8000 Ohm ±25 %

23,200 Ohm

3,200 Ohm

6.56 to 7.99

3495 K

Resistance at 25 °C [77 °F]

Resistance at 0 °C [32 °F] (approx.)

Resistance at 50 °C [122 °F] (approx.)

Ratio of resisistance 0 °C/50 °C

Beta nominal at 25 °C

25,4 MIN.

[1.00]

7,87 NOM.

[0.310]

2.54 NOM.

[0.10]

Temperature coefficient at 25 °C

Time constant (TC) still air max.

Dissipation constant (DC) still air min.

DC helium

Power rating (air)

Power rating (helium)

Max. ambient temperature

Max. operating temperature (including self-heat) 300 °C [572 °F]

Resisistance at max. operating temperature

-3.9 %/°C

1 s

0.16 mW/°C

0.5 mW/°C

45 mW

OHM

MAX. STEADY

STATE CURRENT (A)

RESISTANCE AT MAX.

STEADY STATE CURRENT (OHM)

REFERENCE

140 mW

250 °C [482 °F]

0.5

1

30

20

30

18

8

15

6

7

2

3.2

5

6

8

4

2

2.5

3

2

0.01

0.02

0.03

0.07

0.06

0.03

0.1

0.07

0.3

0.18

0.13

0.15

0.1

ICL32OR530-01

ICL221R020-01

ICL321R030-01

ICL222R018-01

ICL152R508-01

ICL122R508-01

ICL222R515-01

ICL155R006-01

ICL155R007-01

ICL1010002-01

ICL1010004-01

ICL1210005-01

ICL1510006-01

ICL2210008-01

ICL1512004-01

ICL1516004-01

ICL1220002-01

ICL1240002-01

ICL1250002-01

ICL1580003-01

ICL2212103-01

ICL1522102-01

2

25 Ohm

2.5

5

2 % resistance at 25 °C [77 °F]

5

DESCRIPTION

REFERENCE

115-802EDJ-801

10

12

16

20

40

50

80

120

220

Two 111-802EAJ-H01 each mounted on a glass hermetic seal and matched in

helium to within 30 mV, 25 mV and 20 mV of each other at 2 mA, 5 mA,

10 mA and 15 mA.

Air-matched assembly

Characteristics

Resistance at 25 °C [77 °F]

Resistance at 0 °C [32 °F] (approx.)

Resistance at 50 °C [122 °F] (approx.)

Ratio of resistance 0 °C/50 °C

Beta nominal at 25 °C

0.26

0.27

0.5

115-202CDK-801

2000 Ohm ±25 %

4900 Ohm

890 Ohm

0.6

0.72

0.75

0.9

4.95 to 6.95

3000 K

0.8

Temperature coefficient at 25 °C

Time constant (TC) still air max.

Dissipation constant (DC) still air min.

DC helium

-3.4 %/°C

1 s

0.16 mW/°C

0.5 mW/°C

15 mW

Power rating (air)

Power rating (helium)

60 mW

Max. ambient temperature

Max. operating temperature (including self-heat)

Resisistance at max. operating temperature

100 °C [212 °F]

150 °C [302 °F]

88 Ohm

5 % resistance at 25 °C [77 °F]

DESCRIPTION

REFERENCE

Two 111-202CAK-H01 each mounted on a glass hermetic seal and matched in

air to within 15 mV of each other at 5 mA, 10 mA and 15 mA.

115-202CDK-801

23

www.honeywell.com/sensing

TEMPERATURE - PROBES

Temperature Sensors - Probes

Temperature Sensor Probes are finished thermister assemblies complete

with thermister housing, extension leads and sometimes a connector. A

variety of customized packages are available.

NOTE: The products in this section do not follow the “how to use this

catalogue” instructions provided in the catalogue introduction. Specific

reference numbers are not given due to their custom nature. Please

contact your local Honeywell sales office for ordering information.

ES110 Series Inlet Air Temperature

Sensor Probes

ES120 Series Coolant/Oil Temperature

Sensor Probes

The ES110 probe is a thermistor mounted into a plastic lead frame and

assembled into a metal body. This subassembly is then overmolded to

produce both the electrical connection system and the hexagonal shape

for easy installation. Two end configurations are available depending

upon response required or degree of protection. The all-plastic design

reduces heat loss through the sensor, thereby reducing wind chill effects.

The ES120 probe is a thermistor mounted into a plastic lead frame and

assembled into a metal body. This subassembly is then overmolded to

produce both the electrical connection system and the hexagonal shape

for easy installation. The all-plastic design reduces heat loss through the

sensor, thereby reducing wind chill effects.

Operating temperature range:

-40 °C to 155 °C [-40 °F to 311 °F]

Encapsulation:

NTC (Negative Temperature Coefficient) encapsulated

in thermal epoxy

Operating temperature range:

-40 °C to 155 °C [-40 °F to 311 °F]

Encapsulation:

Standard NTC (Negative Temperature Coefficient) epoxy

protection

Lead material:

Terminals are 2,8 mm x 0,8 mm [0.11 in x 0.03 in] brass

with a copper flash protection layer with final plating to

customer requirement (silver, tin, gold, etc.)

Tor values (time to reach 63.2 % of the difference

between two temperatures) are typically 19 s rising

temperature and 14 s falling temperature

None

Lead material:

Terminals are 2,8 mm x 0,8 mm [0.11 in x 0.03 in]

brass with a copper flash protection layer with final plating

to customer requirement (silver, tin, gold, etc.)

0.85 mW/°C in still air at 25 °C [77 °F]

Dissipation constant:

Time constant:

Dissipation constant:

Time constant:

1 s in liquids, 12 s max. in still air

2.5 kOhm at 20 °C [68 °F] ±5 %

Resistance range at 25 °C [77 °F]

2.5 kOhm at 20 °C [68 °F] ±5 %

SERIES NAME

ES110 Inlet Air Temperature Sensor Probe

ES120 Coolant/Oil Temperature Sensor Probe

24

www.honeywell.com/sensing

TEMPERATURE - PROBES

Air Conditioning Temperature Sensor

Probes

Earth Return (Ground) Temperature

Sensor Probes

A fully overmolded and protected sensor incorporating a specially

developed NTC (Negative Temperature Coefficient) to withstand very

aggressive, damp operating conditions. The housing is snap fit for easy

assembly.

An all-metal temperature sensor, with the body being the ground,

incorporating a flat disc thermistor held flush on the base of the body by

a spring-loaded pressure pad. This sensor provides a quick response to

small variations in high temperature changes.

Operating temperature range:

Encapsulation:

-30 °C to 100 °C [-22 °F to 212 °F]

Special NTC epoxy coating

Operating Temperature Range:

Encapsulation:

-40 °C to 155 °C [-40 °F to 311 °F]

NTC (negative temperature coefficient)

encapsulated in a silicone paste

Standard Lucar type or other variations

3 mW/°C in still air

Lead material:

Terminals are 2,8 mm x 0,8 mm [0.11 in x 0.03 in]

brass with a copper flash protection layer with

Lead Material:

Dissipation Constant:

Time Constant:

final plating to customer requirement (silver, tin, gold, etc.)

Dissipation constant:

Time constant:

2.5 mW/°C in still air

2 s in water, 15 s max. in still air

9 kOhm at 0 °C [32 °F] ±1.5 %

10 s in automotive coolant

Per customer requirements

Resistance Range at 25 °C [77 °F]

Resistance range at 25 °C [77 °F]

NAME

Air Conditioning Temperature Sensor Probe

Earth Return (Ground) Temperature Sensor Probe

Surface Temperature Sensor Probes

Refrigerant Temperature Sensor Probes

Sensor assembly is designed to have good heat conductivity between the

thermistor element and the area to be monitored. Time response is

consistent with the thermal conductivity of the surface being measured.

Multiple configurations allow sensor to be mounted, bolted, riveted or

attached adhesively.

A fully sealed, quick response temperature sensor suitable for use in

HVAC systems.

Operating temperature range:

-40 °C to 140 °C [-40 °F to 284 °F]

Encapsulation:

NTC (Negative Temperature Coefficient) encapsulated in a

thermal heat paste

Operating temperature range:

Encapsulation:

-60 °C to 150 °C [-76 °F to 302 °F]

Thermally conductive epoxy used to pot

discrete component into surface-style housing

Lead material:

Terminals are 1,5 mm x 0,6 mm [0.06 in x 0.02 in]

brass with a copper flash protection layer with final

plating to customer requirement (silver, tin, gold, etc.)

Lead material:

Insulated lead wires and terminals when required, other

options available

Dissipation constant:

Time constant:

Tor values (time to reach 63.2 % of the difference

between two temperatures) are typically 10 s

rising temperature and 6 s falling temperature

None

Dissipation constant:

Time constant:

3.3 mW/°C to 12 mW/°C

(varies with size and housing style)

1 s to 40 s (application dependent)

Resistance range at 25 °C [77 °F]

2.5 kOhm at 20 °C [68 °F],

Resistance range at 25 °C [77 °F]

Per customer requirements

calibrated at ±3 % at 100 °C [212 °F]

NAME

Surface Temperature Sensor Probe

Refrigerant Temperature Sensor Probe

25

www.honeywell.com/sensing

TEMPERATURE - PROBES

Immersion Temperature Sensor Probes

Air/Gas Temperature Sensor Probes

Custom designed and application specific, immersion probes are

designed to be directly placed in the liquid medium to be measured. A

large variety of housing alloys are available. Multiple configurations allow

easy mounting.

Air/Gas probes contain an exposed thermistor element because gas is

not as good a heat conductor or thermal sink as a liquid, and because

time response is normally an important consideration. The sensor

housing may be composed of plastic or other thermally conductive

materials to reduce conduction and heat from the gas circulating around

the thermistor. Multiple configurations allow easy mounting.

Operating temperature range:

-60 °C to 300 °C [-76 °F to 572 °F]

Encapsulation:

NTC (Negative Temperature Coefficient) encapsulated in

housing appropriate to the application

Insulated lead wires and terminals when required,

other options available

Operating temperature range:

Encapsulation:

-60 °C to 150 °C [-76 °F to 302 °F]

None, sensing element is exposed

Lead material:

Insulated lead wires and terminals when required,

other options available

Dissipation constant:

Time constant:

5 mW/°C to 10 mW/°C (varies with size

and housing style)

Dissipation constant:

Time constant:

0.1 mW/°C to 3 mW/°C (design specific)

4 s to 150 s (application and design dependent)

1 s to 12 s (design dependent)

Resistance range at 25 °C [77 °F]

Per customer requirements

Resistance range at 25 °C [77 °F]

Per customer requirements

NAME

Air/Gas Temperature Sensor Probe

Immersion Temperature Sensor Probe

26

www.honeywell.com/sensing

THERMOSTATS - COMMERCIAL

Thermostats - Commercial

Commercial thermostats include products for use in a wide array of small

and major appliances, automotive applications, office copy machines,

heat and smoke detectors and HVAC equipment. These snap-action

thermostats include automatic or manual reset options, phenolic or

ceramic housings, and a variety of mounting brackets and terminal

options.

NOTE: The products in this section do not follow the “how to use this

catalogue” instructions provided in the catalogue introduction. Specific

reference numbers are not given due to their custom nature. Please

contact your local Honeywell sales office for ordering information.

2450HR

2450R/2450HR/2455R Series Phenolic

Automatic Reset Thermostats

6,73

[0.265]

2,36 [0.093] DIA.

1,57 [0.062] DEEP

A temperature-sensitive bimetal disc, electrically isolated from the switch,

actuates the normally closed contacts. The contacts open when the

surface or ambient temperatures increase to the operating snap point of

the calibrated disc. Response to temperature changes is extremely rapid

due to the inherently low mass of the disc and the small size of the

product. These products are factory calibrated to the customer’s

specification.

13,94

[0.549]

12,34

14,43 DIA.

[0.568]

[0.486]

9,12

[0.359]

16,0 DIA.

[0.630]

Reset type:

Amperage capacity:

Automatic

15 A resistive max.

Housing material:

Operating temperature range:

Environmental exposure range:

Phenolic

0 °C to 150 °C [32 °F to 302 °F]

0 °C to 177 °C [32 °F to 350 °F]

SERIES NAME

2450HR Phenolic Automatic Reset Thermostat

2450R

2455R

14,43 DIA.

[0.568]

9,63

[0.379]

14,43 DIA.

[0.568]

11,91

[0.469]

16,0 DIA.

[0.630]

0,51

[0.020]

16,0 DIA.

[0.630]

0,51

[0.020]

SERIES NAME

2455R Phenolic Automatic Reset Thermostat

SERIES NAME

2450R Phenolic Automatic Reset Thermostat

27

www.honeywell.com/sensing

THERMOSTATS - COMMERCIAL

2450CM/2455RM Series Ceramic and

Phenolic Manual Reset Thermostats

2450RC/2450RCH/2455RC Series

Ceramic Automatic Reset Thermostats

A temperature-sensitive bimetal disc, electrically isolated from the switch,

actuates the normally closed contacts. The contacts open when the

surface or ambient temperatures increase to the operating snap point of

the calibrated disc. The circuit will stay open above room ambient

temperature until the manual reset button is pressed. Response to

temperature changes is extremely rapid due to the inherently low mass

of the disc and the small size of the product.

A temperature-sensitive bimetal disc, electrically isolated from the switch,

actuates the normally closed contacts. The contacts open when the

surface or ambient temperatures increase to the operating snap point of

the calibrated disc. Response to temperature changes is extremely rapid

due to the inherently low mass of the disc and the small size of the

product.

Reset type:

Amperage capacity:

Housing material:

Operating temperature range:

Environmental exposure range:

Automatic

15 A resistive max.

Reset type:

Amperage capacity:

Housing material:

Operating temperature range: 52 °C to 232 °C [125 °F to 450 °F] (ceramic)

52 °C to 150 °C [125 °F to 302 °F] (phenolic)

Manual

15 A resistive max.

Ceramic or phenolic

Ceramic

0 °C to 260 °C [32 °F to 500 °F]

–20 °C to 287 °C [0 °F to 550 °F]

Environmental exposure range: 10 °C to 260 °C [50 °F to 500 °F] (ceramic)

10 °C to 177 °C [50 °F to 350 °F] (phenolic)

2450RC

16,00

[0.379]

2450CM

1,04 [0.041] MAX TRAVEL OF

RESET BUTTON

ON CONTACT OPENING

15,98

[0.629]

9,63

14,48

[0.379]

12,90 [0.570]

[0.508]

14,43 DIA.

[0.568]

9,55

[0.376]

9,04

[0.356]

0,51

[0.020]

16,0 DIA.

[0.630]

0,51

[0.020]

SERIES NAME

2450RC Ceramic Automatic Reset Thermostat

SERIES NAME

2450CM Ceramic Manual Reset Thermostat

2450RCH

2,36 [0.093] DIA.

1,57 [0.062] DEEP

2455RM

1,04 [0.041] MAX TRAVEL

OF RESET BUTTON ON

CONTACT OPENING

14,48

2,77 DIA. RESET

[0.109] BUTTON

[0.570]

12,90

[0.508]

14,43 DIA.

[0.568]

9,04

[0.356]

15,88 ON CONTACT

[0.625] CLOSING

16,0 DIA.

[0.630]

ENCLOSED DISK

14,43 DIA.

[0.568]

11,91

[0.469]

SERIES NAME

2450RCH Ceramic Automatic Reset Thermostat

16,0 DIA.

[0.630]

0,51

[0.020]

2455RC

SERIES NAME

2455RM Phenolic Manual Reset Thermostat

14,43 DIA.

[0.568]

11,91

[0.469]

16,0 DIA.

[0.630]

0,51

[0.020]

SERIES NAME

2455RC Ceramic Automatic Reset Thermostat

28

www.honeywell.com/sensing

THERMOSTATS - COMMERCIAL

2450A/2455A Series Heat Detection

2450R/2450RCH/2455R/2455RC Series

“One-shot” ½ in Thermostats

Products are designed for high limit applications where automatic reset

is not desired.

Thermostats

°

The gold contacts open or close on a temperature rise of 47 C to 107 C

°

[117 F to 225 F].

Reset type:

Amperage capacity:

Housing material:

Operating temperature range:

Environmental exposure range:

Automatic

15 A resistive max.

Reset type:

Amperage capacity:

Housing material:

None

15 A resistive max.

ceramic or phenolic

Phenolic, epoxy-sealed cap and terminal

°

47 C to 107 C [117 F to 225 F]

Operating temperature range: 52 C to 260 C [125 F to 500 F] (ceramic)

°

0 C to 150 C [32 F to 302 ^°F]

52 C to 150 C [125 F to 302 F] (phenolic)

°

Environmental exposure range:

18 ^°C to 316 C [0 °F to 600 F] (ceramic)

°

18 C to 177 C [0 °F to 350 F] (phenolic)

2450A

2450R

9,63

[0.379]

14,43 DIA.

[0.568]

9,63

[0.379]

0,51

[0.020]

16,0 DIA.

[0.630]

0,51

[0.020]

SERIES NAME

2450A Heat Detection Thermostat

2455A

SERIES NAME

2450R Phenolic “One-shot” ½ in Thermostat

11,91

[0.469]

2450RCH

2,36 [0.093] DIA.

1,57 [0.062] DEEP

0,51

[0.020]

14,48

[0.570]

12,90

[0.508]

SERIES NAME

2455A Heat Detection Thermostat

14,43 DIA.

[0.568]

9,04

[0.356]

2455RBV Series Overmolded Automatic

Reset Thermostats

A temperature-sensitive bimetal disc, electrically isolated from the switch,

actuates the normally closed contacts. The contacts open when the

surface or ambient temperatures increase to the operating snap point of

the calibrated disc. Response to temperature changes is extremely rapid

due to the inherently low mass of the disc and the small size of the

product.

16,0 DIA.

[0.630]

ENCLOSED DISK

SERIES NAME

2450RCH Ceramic “One-shot” ½ in Thermostat

2455R

Reset type:

Amperage capacity:

Automatic

15 A resistive max.

14,43 DIA.

[0.568]

11,91

[0.469]

Housing material:

Operating temperature range:

Environmental exposure range:

Ceramic or phenolic, epoxy overmold

°

-12 C to 105 C [10 F to 221 F]

°

-18 ^°C to 121 C [0 F to 250 ^°F]

16,0 DIA.

[0.630]

0,51

[0.020]

2455RBV

AS REQUIRED

SERIES NAME

2455R Phenolic “One-shot” ½ in Thermostat

WIRE GAGE AND

INSULATION AS

REQUIRED

2455RC

AS REQUIRED

14,43 DIA.

[0.568]

11,91

[0.469]

18,54

[0.730]

16,0 DIA.

[0.630]

0,51

[0.020]

17,27 DIA.

[0.680]

0,51

[0.020]

SERIES NAME

2455RBV Overmolded Automatic Reset Thermostat

SERIES NAME

2455RC Ceramic “One-shot” ½ in Thermostat

29

www.honeywell.com/sensing

THERMOSTATS - COMMERCIAL

2450R Series Annular Ring Cap

Automatic Reset Thermostats

A temperature-sensitive bimetal disc, electrically isolated from the switch,

actuates the normally closed contacts. The contacts open when the

surface or ambient temperatures increase to the operating snap point of

the calibrated disc. Response to temperature changes is extremely rapid

due to the inherently low mass of the disc and the small size of the

product.

2450R Series Fully Sealed Thermostats

A temperature-sensitive bimetal disc, electrically isolated from the switch,

actuates the normally closed contacts. The contacts open when the

surface or ambient temperatures increase to the operating snap point of

the calibrated disc. Response to temperature changes is extremely rapid

due to the inherently low mass of the disc and the small size of the

product.

Reset type:

Amperage capacity:

Housing material:

Automatic

15 A resistive, 12 Vdc

Reset type:

Amperage capacity:

Housing material:

Automatic

15 A resistive, 12 Vdc

Phenolic, can be partially or totally sealed

against water ingress

Phenolic housing, aluminium cap totally

encapsulated in water resistant epoxy

°

Operating temperature range:

Environmental exposure range:

Life cycle capability:

Low temperature differential:

Switch temperature tolerance:

-10 ^°C to 55 ^°C [14 F to 131 F]

°

Operating temperature range:

Environmental exposure range:

Life Cycle Capability:

Low Temperature Differential:

Switch Temperature Tolerance:

-10 C to 55 C [14 F to 131 F]

-40 ^°C to 130 C [-40 ^°F to 266 ^°F]

°

-40 C to 130 C [-40 F to 266 F]

300 K at 12 Vdc, 10 A

°

Down to 8 C [46 ^°F]

°

Down to 8 C [46 F]

°

±3 C

°

±3 C

16,1 MAX.

[0.63]

14,43 DIA.

[0.568]

9,63

[0.379]

11,5

[0.45]

16,0 DIA.

[0.630]

0,51

[0.020]

SERIES NAME

2450R Phenolic Annular Ring Cap Automatic Reset Thermostat

2450R/2455R Series Protected

Thermostats

A temperature-sensitive bimetal disc, electrically isolated from the switch,

actuates the normally closed contacts. The contacts open when the

surface or ambient temperatures increase to the operating snap point of

the calibrated disc. Basic thermostat is protected from the environment

by sealing it in a metal housing or encapsulating it in epoxy.

SERIES NAME

2450R Fully Sealed Thermostat

Reset type:

Amperage capacity:

Automatic

15 A resistive, 12 Vdc

Housing material:

Operating temperature range:

Environmental exposure range:

Brass, aluminium, stainless steel and epoxy

°

15 C to 130 C [59 F to 266 F]

°

-40 C to 155 C [-40 ^°F to 311 ^°F]

SERIES NAME

2450R Protected Thermostat

2455R Protected Thermostat

30

www.honeywell.com/sensing

THERMOSTATS - PRECISION

Thermostats - Precision

Precision snap-action thermostats include both hermetic and non-

hermetic devices for use in a wide array of applications including

computers, copy machines, aircraft, radar equipment, medial equipment

and electronic control systems. We also offer custom-packaged

thermostats for application flexibility and industrial-grade thermostats

designed to operate in extreme environmental conditions.

NOTE: The products in this section do not follow the “how to use this

catalogue” instructions provided in the catalogue introduction. Specific

reference numbers are not given due to their custom nature. Please

contact your local Honeywell sales office for ordering information.

3100/3106 Series Hermetic Thermostats

The 3100/3106 Series is a single pole, single throw switch activated by a

snap-action bimetal disc. Temperature calibrations are pre-set at the

factory and each unit is 100 % thermally and mechanically inspected. It is

available to open or close on temperature rise. The case is laser welded to

form a hermetically-sealed steel housing with a glass-to-metal seal at the

terminal junction. It is manufactured and tested to meet or exceed critical

commercial and industrial specifications. The 3106 Series has gold alloy

contacts for low voltage applications.

Amperage:

0.5 A resistive (3106 Series)

7 A resistive (3100 Series)

Housing material:

Operatingtemperaturerange:

Steel housing with glass-to-metal

seal at terminal junction

°

-29 C to 260 C [-20 F to 500 F] (3100 Series)

°

-29 C to 204 C [-20 F to 400 ^°F] (3106 Series)

°

Environmental exposure range:

Dielectric strength:

-62 C to 288 C [-80 ^°F to 550 ^°F]

MIL-STD-202, Method 301

1250 Vac 60 Hz terminal to case (3100, 3100U, 3106 Series)

1500 Vac 60 Hz terminal to case (3100UX Series)

SERIES NAME

3100 Hermetic Thermostat

3100U Hermetic Thermostat

3100UX Hermetic Thermostat

3106 Hermetic Thermostat

Insulation resistance:

MIL-STD-202, Method 302, Condition B

50 MOhm, 500 Vdc applied

MIL-STD-202, Method 307

25 mOhm (3106 Series)

Contact resistance:

50 mOhm (3100 Series)

Hermetic seal:

MIL-STD-202, Method 112, Condition A

1x10^-5atm cc/s

Moisture resistance:

MIL-STD-202 Method 106

31

www.honeywell.com/sensing

THERMOSTATS - PRECISION

3150/3156 Series Low Silhouette

Hermetic Thermostats

3800 Series Industrial-Grade Thermostats

for Severe Duty Applications

The 3150/3156 Series is a single pole, single throw switch activated by a

snap-action bimetal disc. Temperature calibrations are pre-set at the

factory and each unit is 100% thermally and mechanically inspected. It is

available to open or close on temperature rise. The case is laser welded to

form a hermetically-sealed steel housing with a glass-to-metal seal at the

terminal junction. The low silhouette and compact design make it

especially well suited for applications that require miniaturization. The

3156 Series has gold alloy contacts for low voltage applications.

The 3800 Series is used where high levels of vibration and mechanical

shock are common but a military device is not required. It is easily

customized for use in a variety of applications.

Amperage:

7 A resistrive

Housing material:

Steel housing with glass-to-metal seal at terminal junction

°

Operating temperature range:

Environmental exposure range:

Dielectric strength:

-29 ^°C to 260 C [-20 ^°F to 500 F]

°

-62 ^°C to 260 C [-80 ^°F to 500 F]

MIL-STD-202, Method 301

Amperage:

0.5 A resistive (3156 Series)

7 A resistive (3150 Series)

1250 Vac terminal to case

Insulation resistance:

Contact resistance:

Hermetic seal:

MIL-STD-202, Method 302, Condition B

50 MOhm min. terminal to case

MIL-STD-202, Method 307

Housing material:

Steel housing with glass-to-metal seal at

terminal junction

°

Operating temperature range:

Environmental exposure range:

Dielectric strength:

-29 C to 177 C [-20 F to 350 F]

50 mOhm max.

°

-62 C to 260 C [-80 F to 500 F]

MIL-STD-202, Method 301

MIL-STD-202, Method 112, Condition A

1 x 10^-5atm cc/s

750 Vac 60 Hz terminal to case (3150, 3156 Series)

1250 Vac 60 Hz terminal to case (3150U, 3156U Series)

1500 Vac 60 Hz terminal to case (3150UX Series)

Moisture resistance:

Vibration (random):

MIL-STD-202, Method 106

MIL-STD-202, Method 214

30 g, 20 Hz to 2,000 Hz

Insulation resistance:

MIL-STD-202, Method 302, Condition B

50 MOhm, 500 Vdc applied

MIL-STD-202, Method 307

25 mOhm (3156 Series)

Vibration (sinusoidal):

MIL-STD-202, Method 204,

Condition D 20 G, 20 Hz to 2,000 Hz

MIL-STD-202, Method 213, 400 G

MIL-STD-202. Method 107, Condition B

MIL-STD-202, Method 212, 20 G

Contact resistance:

Mechanical shock:

Thermal shock:

Acceleration:

50 mOhm (3150 Series)

Hermetic seal:

MIL-STD-202, Method 112, Condition A

1x10^-5atm cc/s

Moisture resistance:

MIL-STD-202 Method 106

SERIES NAME

3150 Low Silhouette Hermetic Thermostat

3150U Low Silhouette Hermetic Thermostat

3150UX Low Silhouette Hermetic Thermostat

3156 Low Silhouette Hermetic Thermostat

3156U Low Silhouette Hermetic Thermostat

3800 Industrial Grade Thermostat

32

www.honeywell.com/sensing

THERMOSTATS - PRECISION

3000 Series Custom-packaged

Thermostats

The 3000 Series incorporates a Honeywell thermostat assembled in a

custom package for use in a variety of applications that require flexibility

in mounting and terminal configurations. A typical product includes a

3100 hermetic internal thermostat with a terminal selection, housing

selection and customized part number. These custom package devices

operate in extreme environmental conditions, including exposure to

hazardous substances, dust particles and liquid immersion.

Amperage:

Housing material:

Operating temperature range:

Environmental exposure range:

Dielectric strength:

7 A resistive

Stainless steel or brass

Insulation resistance:

Contact resistance:

Hermetic seal:

MIL-STD-202, Method 302

50 MOhm to 500 MOhm

MIL-STD-202, Method 307

50 mOhm max.

°

-29 C to 260 C [-20 F to 500 F]

°

-62 C to 288 C [-80 F to 550 F]

MIL-STD-202, Method 301

MIL-STD-202, Method 112, Condition A

1250 Vac 60 Hz terminal to case

1 x 10^-5atm cc/s

Moisture resistance:

MIL-STD-202 Method 106

Terminations for 3000-45X* and 3000-55X* Housings

Terminations for 3000-53X*

and 3000-141 Housings

1

0

WIRE LEADS,

HERMETIC

LENGTHS

1

CONNECTOR

AS REQ'D.

WIRE LEADS,

LENGTHS

BAYONET

OR THREADED

AS REQ'D.

2a

6,35 [0.25] MALE

QUICK CONNECTS

2a

6,35 [0.25] MALE

QUICK CONNECTS

3

WIRE LEADS,

LENGTHS

AS REQ'D.

2b

60˚

REF.

6,35 [0.25] MALE

QUICK CONNECTS

2b

60˚

REF.

6,35 [0.25] MALE

QUICK CONNECTS

1/2 - 14 NPT

THREAD

Housings

3000-45X*

Housings

25,4 [1.00]

3000-53X*

3/4 - 16 UNF-3A

THREAD

22,26 [0.875]

4a

6,35 [0.25] MALE

QUICK CONNECTS

PROBE

LENGTH

1/2 - 14 NPT

THREAD

1/2 - 14 NPT

THREAD

SENSING SURFACE

3000-55X*

3000-141

4b

22,26 [0.875]

25,4 [1.00]

60˚

REF.

6,35 [0.25] MALE

QUICK CONNECTS

1/2 - 14 NPT

THREAD

3/4 - 16 UNF - 3A

THREAD

1/2 - 14 NPT

THREAD

PROBE

LENGTH

SENSING SURFACE

SERIES NAME

3000 Custom-packaged Thermostat

33

www.honeywell.com/sensing

THERMOSTATS - PRECISION

3450R/3450HR/3455R Series Phenolic

Automatic Reset Thermostats

3450RC/3450RCH/3455RC Series

Ceramic Automatic Reset Thermostats

A temperature-sensitive bimetal disc, electrically isolated from the switch,

actuates the normally closed contacts. The contacts open when the

surface or ambient temperatures increase to the operating snap point of

the calibrated disc. Response to temperature changes is extremely rapid

due to the inherently low mass of the disc and the small size of the

product. These products are factory calibrated to the customer’s

specification.

A temperature-sensitive bimetal disc, electrically isolated from the switch,

actuates the normally closed contacts. The contacts open when the

surface or ambient temperatures increase to the operating snap point of

the calibrated disc. Response to temperature changes is extremely rapid

due to the inherently low mass of the disc and the small size of the

product.

Reset type:

Amperage capacity:

Housing material:

Operating temperature range:

Environmental exposure range:

Automatic

15 A resistive max.

Ceramic

Reset type:

Amperage capacity:

Housing material:

Operating temperature range:

Environmental exposure range:

Automatic

15 A resistive max.

Phenolic

°

0 C to 260 C [32 F to 500 F]

°

0 C to 150 C [32 F to 302 F]

-20 C to 287 C [0 F to 550 F]

°

0 C to 177 C [32 F to 350 F]

3450R

3450RC

16,00

[0.379]

14,43 DIA.

[0.568]

9,63

[0.379]

16,0 DIA.

[0.630]

0,51

[0.020]

9,63

[0.379]

SERIES NAME

3450R Phenolic Automatic Reset Thermostat

0,51

[0.020]

3450HR

SERIES NAME

3450RC Ceramic Automatic Reset Thermostat

6,73

[0.265]

2,36 [0.093] DIA.

1,57 [0.062] DEEP

3450RCH

13,94

[0.549]

2,36 [0.093] DIA.

1,57 [0.062] DEEP

12,34

14,43 DIA.

[0.568]

[0.486]

9,12

[0.359]

14,48

[0.570]

12,90

[0.508]

16,0 DIA.

[0.630]

14,43 DIA.

[0.568]

9,04

[0.356]

16,0 DIA.

[0.630]

ENCLOSED DISK

SERIES NAME

3450HR Phenolic Automatic Reset Thermostat

SERIES NAME

3450RCH Ceramic Automatic Reset Thermostat

3455R

3455RC

14,43 DIA.

[0.568]

11,91

[0.469]

14,43 DIA.

[0.568]

11,91

[0.469]

16,0 DIA.

[0.630]

0,51

[0.020]

16,0 DIA.

[0.630]

0,51

[0.020]

SERIES NAME

3455RC Ceramic Automatic Reset Thermostat

SERIES NAME

3455R Phenolic Automatic Reset Thermostat

34

www.honeywell.com/sensing

THERMOSTATS - PRECISION

3450CM/3455RM Series Ceramic and

Phenolic Manual Reset Thermostats

3455RBV Series Overmolded Automatic

Reset Thermostats

A temperature-sensitive bimetal disc, electrically isolated from the switch,

actuates the normally closed contacts. The contacts open when the

surface or ambient temperatures increase to the operating snap point of

the calibrated disc. The circuit will stay open above room ambient

temperature until the manual reset button is pressed. Response to

temperature changes is extremely rapid due to the inherently low mass

of the disc and the small size of the product.

A temperature-sensitive bimetal disc, electrically isolated from the switch,

actuates the normally closed contacts. The contacts open when the

surface or ambient temperatures increase to the operating snap point of

the calibrated disc. Response to temperature changes is extremely rapid

due to the inherently low mass of the disc and the small size of the

product.

Reset type:

Amperage capacity:

Automatic

15 A resistive max.

Reset type:

Manual

Amperage capacity:

Housing material:

Operating temperature range:

15 A resistive max.

Housing material:

Operating temperature range:

Environmental exposure range:

Ceramic or phenolic, epoxy overmold

°

Ceramic or phenolic

-12 C to 105 C [10 F to 221 F]

°

52 C to 232 C [125 F to 450 F] (ceramic)

-18 C to 121 C [0 F to 250 F]

°

52 C to 150 C [125 F to 302 F] (phenolic)

°

Environmental exposure range: 10 C to 260 C [50 F to 500 F] (ceramic)

°

10 C to 177 C [50 F to 350 F] (phenolic)

AS REQUIRED

3450CM

WIRE GAGE AND

INSULATION AS

REQUIRED

AS REQUIRED

1,04 [0.041] MAX TRAVEL OF

RESET BUTTON

ON CONTACT OPENING

15,98

[0.629]

14,48

18,54

[0.730]

12,90 [0.570]

[0.508]

14,43 DIA.

[0.568]

9,55

9,04

[0.376]

[0.356]

16,0 DIA.

[0.630]

0,51

[0.020]

17,27 DIA.

[0.680]

0,51

[0.020]

SERIES NAME

3455RBV Overmolded Automatic Reset Thermostat

SERIES NAME

3450CM Ceramic Manual Reset Thermostat

3455RM

1,04 [0.041] MAX TRAVEL

OF RESET BUTTON ON

CONTACT OPENING

2,77 DIA. RESET

[0.109] BUTTON

15,88 ON CONTACT

[0.625] CLOSING

14,43 DIA.

[0.568]

11,91

[0.469]

16,0 DIA.

[0.630]

0,51

[0.020]

SERIES NAME

3455RM Phenolic Manual Reset Thermostat

35

www.honeywell.com/sensing

THERMOSTATS - PRECISION

3455R

3450R/3450RC/3450RCH/3455R/3455RC

Series “One-shot” ½ in Thermostats

14,43 DIA.

[0.568]

11,91

[0.469]

Products are designed for high limit applications where automatic reset is

not desired.

Reset type:

None

Amperage capacity:

Housing material:

Operating temperature range:

15 A resistive max.

16,0 DIA.

[0.630]

0,51

[0.020]

Ceramic or phenolic

°

52 C to 260 C [125 F to 500 F] (ceramic)

°

52 C to 150 C [125 F to 302 F] (phenolic)

°

Environmental exposure range:

18 C to 316 C [0 F to 600 F] (ceramic)

SERIES NAME

°

18 C to 177 ^°C [0 F to 350 F] (phenolic)

3455R Phenolic “One-shot” ½ in Thermostat

3455RC

3450R

14,43 DIA.

[0.568]

9,63

[0.379]

14,43 DIA.

[0.568]

11,91

[0.469]

16,0 DIA.

[0.630]

0,51

[0.020]

16,0 DIA.

[0.630]

0,51

[0.020]

SERIES NAME

3450R Phenolic “One-shot” ½ in Thermostat

SERIES NAME

3455RC Ceramic “One-shot” ½ in Thermostat

3450RC

16,00

[0.379]

9,63

[0.379]

0,51

[0.020]

SERIES NAME

3450RC Ceramic “One-shot” ½ in Thermostat

3450RCH

2,36 [0.093] DIA.

1,57 [0.062] DEEP

14,48

[0.570]

12,90

[0.508]

14,43 DIA.

[0.568]

9,04

[0.356]

16,0 DIA.

[0.630]

ENCLOSED DISK

SERIES NAME

3450RCH Ceramic “One-shot” ½ in Thermostat

36

www.honeywell.com/sensing

HEATERS

Heaters

Heaters are resistive devices that are used in a variety of applications

such as airborne valves, appliances, satellites and medical electronics.

They are available in flat, molded-to-shape, spiral wrap, transparent,

composite and high temperature configurations. Honeywell uses a

variety of materials to manufacture its heaters. These include silicone,

which can easily be vulcanized to metal parts; Kapton, noted for its

thermal stability over a wide temperature range; as well as other flexible

dielectric materials. Heaters are available with single, multiple or variable

watt densities to customize heat output to unique application needs. They

may also be bonded to other system parts or combined with Honeywell

thermostats, thermistors, thermocouples, temperature sensors and

thermal fuses to form custom-engineered heating systems. Optional PSA

(Pressure Sensitive Adhesive) is available with all series.

NOTE: The products in this section do not follow the “how to use this

catalogue” instructions provided in the catalogue introduction. Specific

reference numbers are not given due to their custom nature. Please

contact your local Honeywell sales office for ordering information.

3200 Series Silicone Chemically-etched

Heaters

The 3200 Series contains resistive foil traces encased between two layers

of fiberglass-supported silicone rubber. All bonding adhesives are

uncured silicone rubber. These heaters are cured under pressure and

temperature during their manufacturing. They are the optimal choice for

multiple watt densities or varying trace geometry requirements.

3100 Series Silicone Wire-wound Heaters

The 3100 Series contains resistive wire encased between two layers of

fiberglass-supported silicone rubber. All bonding adhesives are uncured

silicone rubber. These heaters are cured under pressure and

temperature during manufacturing. The multi-stranded resistance wires

allow wire-wound heaters to conform to three dimensional shapes.

Optional PSA (Pressure Sensitive Adhesive) is available with all series.

Maximum power:

Operating/storage temperature range:

40 W/in²

250 °C [482 °F] max.

200 °C [392 °F] max. (UL)

Maximum power:

Operating/storage temperature range:

40 W/in²

250 °C [482°F] max.

200 °C [392 °F] max. (UL)

Size constraints:

Geometry:

Heater trace pattern:

None, virtually any size and shape

Specific to customer requirements

Size constraints:

Geometry:

Heater trace pattern:

0,61 m x 0,61 m [24 in x 24 in]

Specific to customer requirements

WHITE WIRE 2 PLACES

25,4

[1.00]

44,6

[1.76]

152,4

[6.00]

609,6 ±12,7

[24.0 ±0.50]

25,4

[1.00]

609,6 ±12,7

[24.0 ±0.50]

PATCH (SILICONE)

LEADWIRES

SILICONE

ELEMENT

PATCH (SILICONE)

SILICONE

ELEMENT

SILICONE

HEATER SIDE VIEW

(EXPLODED)

SILICONE

LEADWIRES

HEATER SIDE VIEW

(EXPLODED)

SERIES NAME

3100 Silicone Wire-wound Heater

SERIES NAME

3200 Silicone Chemically-etched Heater

37

www.honeywell.com/sensing

HEATERS

3400 Series Kapton or High Temperature

Insulated Heaters

The 3400 Series contains etched, resistive foil encased between two

layers of Kapton. The Kapton Insulated Heaters use an acrylic thermoset

bonding adhesive, while the Kapton Insulated High Temperature Heaters

use a Teflon™ bonding adhesive. Insulated heaters are used in

applications where thin profile and or low material outgassing are

important considerations.

78000 Series Transparent Heaters

The 78000 Series heater resistive element consists of a very thin layer of

ITO (Indium Tin Oxide) electrically sputtered on PET polyester film. The

electrical connection is made via silver ink or carbon bus bars laid on top

of the ITO. Wire connections are made via ring terminals eyeleted to the

silver or carbon bus bars or flexible tail/connector. Transparent heaters

are used to warm liquid crystal displays (LCDs) in cold, moist

environments.

5 W/in²

-40 °C to 85 °C [-40 °F to 185 °F]

0,60 m x 0,43 m [22 in x 17 in]

Maximum power:

Operating/storage temp. range:

40 W/in²

• Kapton insulated: 177 °C [350 °F] max.

• Kapton high temperature insulated:

260 °C [500 °F] max.

Maximum power:

Operating/storage temp. range:

Size constraints:

Geometry:

Specific to customer requirements within size constraints

Size constraints:

0,61 m x 0,61 m [24 in x 24 in]

Heater trace pattern: Continuous layer of ITO (Indium Tin Oxide) evenly

Geometry:

Specific to customer requirements within size constraints

sputtered across entire surface

Heater trace pattern:

Specific to customer requirements

508,0 ±12,7

[20.00 ±0.50]

6,35

[0.25]

170,2

18,15

[6.70]

[0.714]

257,3

[10.13]

609,0 ±25,4

[24.0 ±1.0]

18,15

[0.714]

159,0 CLEAR

[6.26] VIEW

AREA

ADHESIVE

154,4

[6.08]

THIS SURFACE

SHRINK SLEEVE

INSULATION

2 PLACES

14,95

[0.59]

212,09 CLEAR VIEW AREA

[8.35]

ADHESIVE PATCH

POLYIMIDE

14,95

[0.59]

ELEMENT

220,98

[8.70]

POLYIMIDE

ADHESIVE SIDE

SERIES NAME

3400 Kapton or High Temperature Insulated Heater

78000 Transparent Heater

38

www.honeywell.com/sensing

COMBI-SENSOR

Combi-sensor

The Combi-sensor is a liquid pressure/temperature sensor that uses

piezoresistive and thermistor sensing technology to measure water

pressure and temperature. It is designed for use in boiler system water

pressure and inflow temperature measurement applications.

Pressure range:

Accuracy:

0 bar to 3.0 bar relative

±2 % over full range

<3 s

Response time:

Operating temperature:

Overpressure:

Burst pressure:

Power supply:

5 °C to 110 °C [41 °F to 203 °F]

5 bar for 1 hour

9 bar for 1 min

5 Vdc ±10 %

Voltage output:

0.5 Vdc to 4.5 Vdc ratiometric to Vs

Maximum current limit: 250 mA (not self-limiting) (for reverse polarity)

NTC (Negative Temperature Coefficient) characteristics: 10 kOhm

at 25 °C ±3 % beta(25/85) = 3998 K ±2 %

Connection:

Lumberg rast 2.5 edge connector ESL code 312-600

DESCRIPTION

REFERENCE

Combi-sensor

FS300-100

39,0

[1.54]

17,0

[0.67]

41,5

[1.66]

39,0 DIA.

[1.54]

39

www.honeywell.com/sensing

THERMAL CUTOFFS

Thermal Cutoffs

Thermal Cutoffs include products for use in a wide array of small

appliances, major appliances, office copy machines, automotive, and

HVAC equipment. These devices are available in various lead lengths and

configurations.

NOTE: The products in this section do not follow the “how to use this

catalogue” instructions provided in the catalogue introduction. Specific

reference numbers are not given due to their custom nature. Please

contact your local Honeywell sales office for ordering information.

NOTICE

•

To maximize product life, use a 30 °C [86 °F] min. differential

between the operating ambient temperature at the fuse location

and the specified functioning temperature of the fuse being used.

Maintain a 40 °C [104 °F] min. differential between devices with

functioning temperatures above 200 °C [392 °F].

•

Under no condition should the thermal cutoff be exposed to a

continuous normal temperature rating in excess of 200 °C

[392 °F]. Only proper testing of the above will determine the

selected thermal cutoff’s suitability within the application.

D Series

DXXX-002

81,79

The D Series responds to temperature by interrupting an electrical circuit

when the operating and/or environmental temperature exceeds the

thermal rating of the fuse. This is accomplished when the organic pellet

experiences a phase change, allowing the spring activated contacts to

permanently open the circuit.

[3.220]

35,05

[1.380]

46,74

[1.840]

11,61 REF.

[0.457]

SILVER-PLATED

BRASS CASE

Operating temperature range:

Environmental exposure range:

72 °C to 240 °C [162 °F to 464 °F]

see notice

TIN-PLATED

18 AWG 1,02 [0.040]

COPPER WIRE

3,99

[0.157]

SILVER-PLATED

18 AWG 1,02 [0.040]

COPPER WIRE

DXXX-001

NAME

DXXX-002

64,26

[2.530]

DXXX-003

29,21

[1.150 ]

35,05

[1.380 ]

69,09

[2.720]

34,04

[1.340]

35,05

[1.380]

11,61 REF.

[0.457]

SILVER-PLATED

BRASS CASE

11,61 REF.

[0.457]

SILVER-PLATED

BRASS CASE

3,99

[0.157]

TIN-PLATED

18 AWG 1,02 [0.040]

COPPER WIRE

TIN-PLATED

18 AWG 1,02 [0.040]

COPPER WIRE

3,99

[0.157]

SILVER-PLATED

18 AWG 1,02 [0.040]

COPPER WIRE

SILVER-PLATED

18 AWG 1,02 [0.040]

COPPER WIRE

NAME

DXXX-001

DXXX-003

40

www.honeywell.com/sensing

THERMAL CUTOFFS

RD Series

The RD Series responds to temperature by interrupting an electrical

circuit when the operating and/or environmental temperature exceeds

the thermal rating of the fuse. This is accomplished when the organic

pellet experiences a phase change, allowing the spring activated

contacts to permanently open the circuit.

The electrical resistance of an RD Series thermal cutoff is comparable to

that found in an equal length of 18 gauge solid copper wire. With

proper heat flow, heat generation below 15 A is minimal. Above 15 A,

the upper limit on current capacity will depend on the environment for

each specification

Operating temperature range:

Envirnmental exposure range:

72 °C to 240 °C [162 °F to 464 °F]

see notice

RDXXX-001

NAME

RDXXX-001

RDXXX-002

NAME

RDXXX-002

41

www.honeywell.com/sensing

POSITION SENSORS

POSITION

Honeywell’s Solid State Position Sensor family includes digital and analog Hall-effect position

Position Sensors

sensors, magnetoresistive digital sensors, Hall-effect vane sensors, gear tooth sensors, Hall-effect

basic switches, and magnets. Solid State Position Sensors are reliable, high speed, long life,

sensors and are directly compatible with other electronic circuits.

Position sensors are used in applications which require accurate, reliable outputs. They are found in

brushless dc motors, utility meters, welding equipment, vending machines, home appliances,

computers, etc.

Unipolar - temperature

compensated

SS40/400 Series

Hall effect digital

position sensor

SS400 Series position sensors have a thermally

balanced integrated circuit over full temperature

range. The negative compensation slope is

optimized to match the negative temperature

coefficient of lower cost magnets. Bipolar, latching

and unipolar magnetics are available.

SS49/490 Series

Ratiometric hall effect

linear position sensor

Package style:

OPERATING POINT

(MAXIMUM)

115 Gauss

RELEASE POINT

(MINIMUM)

20 Gauss

REFERENCE

SS441A

SS443A

SS449A

180 Gauss

75 Gauss

Radial lead IC

390 Gauss

235 Gauss

Supply voltage:

Operating temperature:

4.5 to 10.5 Vdc

-40 °C to 150 °C

-40 °F to 302 °F

-670 to 670 Gauss

Bipolar latching- temperature

compensated

Magnetic range:

OPERATING POINT

(MAXIMUM)

85 Gauss

RELEASE POINT

(MINIMUM)

-85 Gauss

REFERENCE

OPTIONS

Band gap regulation provides extremely stable

operation over 3.8 Vdc to 30 Vdc supply voltage

range.

SS461A

SS466A

180 Gauss

-180 Gauss

Temperature compensated

Gate

Package style:

Supply voltage:

Operating temperature:

Radial lead IC

3.8 Vdc to 30 Vdc

-40 °C to 150 °C

-40 °F to 302 °F

3˚ (2)

2X 3˚

2X 48˚

2,54

0.10

4,06

0.16

48˚ (2)

2,5

1,75

0.07

1

0.10

3,0

1.12

4,1

0.16

15,0

0.59

Hall element

centre

3,0

0.12

+

0,76

0.03

-

0

3 x

MAX

0,7

0.025

3 x

MAX

1,7

0.07

14,99

0.59

0,4

0.015

3 x

0

1,3

0.05

2 x

0,43

(3)

+

0.017

_

0,38

(3)

0.015

1,3

(2)

0.05

3,2

0.125

OPTIONS

+

-

0

MAXIMUM Operating Point and MINIMUM

Release Point are specified @ 25 °C

PACKAGE STYLE

REFERENCE

SS495A

Bipolar - temperature compensated

High accuracy

High accuracy Surface mount

Surface mount reel

SS495A1

SS495A1-S

SS495A-SP

OPERATING POINT

(MAXIMUM)

60 Gauss

RELEASE POINT

(MINIMUM)

-60 Gauss

REFERENCE

SS411A

SS413A

140 Gauss

-140 Gauss

Bipolar - non temperature

compensated

Supply voltage:

4.5 to 24 Vdc

Operating temperature:

-55 °C to 150 °C

-67 °F to 302 °F

OPERATING POINT

(MAXIMUM)

RELEASE POINT

(MINIMUM)

REFERENCE

150 Gauss

-140 Gauss

SS41

42

www.honeywell.com/sensing

POSITION SENSORS

POSITION

SS49/490 Series

Ratiometric hall effect

linear position sensor

(Continued)

SS500 Series

Hall effect digital

position sensor

Package style:

Supply voltage:

Operating temperature:

SS94 Series

Ratiometric hall effect

linear position sensor

The SS9 utilizes a Hall effect integrated circuit chip

which provides increased temperature stability

and performance. Laser trimmed thick film

resistors on the ceramic substrate and thin film

resistors on the integrated circuit reduce null and

gain shifts over temperature which results in

consistent sensitivity from one device to the next.

Surface mount

3.8 to 30 Vdc

-40 °C to 150 °C

-40 °F to 302 °F

Non temperature compensated

GATE

2 X 3˚ ± 2˚

2 X 48˚ ± 2˚

NOMINAL

PACKAGE

HALL ELEMENT

(

Package style:

Supply voltage:

Operating temperature:

Ceramic

6.6 Vdc to 12.6 Vdc

-40 °C to 125 °C

2,54

0.10

.067

4,1

0.16

.005 MAX FLASH

-40 °F to 257 °F

-500 to 500 Gauss

-100 to 100 Gauss

CATALOG

LISTING

Magnetic range:

SS94A1F

3,0

0.12

.164 ± .003

DATE CODE

2,03

0.08

MAX

1,75

0.07

( - )

( + )

(0)

6

.005 MAX

3X .016

(0)

0,43

0.017

3 x

+

2X .059 ± .002

_

0,38

0.015

.173

1,27

0.05

2 x

3

3,17

0.125

N

S

+

-

0

Supply voltage:

Operating temperature:

4 to 10 Vdc

-25 °C to 85 °C

-13 °F to 185 °F

.177 ± .004

Magnetic range:

-1000 to 1000 Gauss

OPTIONS

REFERENCE

SS49

MAXIMUM Operating Point and MINIMUM

Release Point are specified @ 25 °C

Miniature Ratiometric hall effect

linear position sensor

SS490 Series MRL (Miniature Ratiometric Linear)

sensors have a ratiometric output voltage, set by

the supply voltage. It varies in proportion to the

strength of the magnetic field.

Bipolar - temperature compensated

OPTIONS

OPERATING POINT

(MAXIMUM)

60 Gauss

RELEASE POINT

(MINIMUM)

-60 Gauss

REFERENCE

Temperature compensated

SS511AT

SS513AT

140 Gauss

-140 Gauss

MAIN FEATURE

General purpose

REFERENCE

SS94A1

High sensitivity (25 mV/Gauss output @ 8 Vdc supply) SS94A1F

Noise shielded SS94A2

Bipolar - non temperature

compensated

Supply voltage:

Temperature compensated

Gate

2X 3˚

4,5 to 24 Vdc

REFERENCE

SS51T

2X 48˚

OPERATING POINT

(MAXIMUM)

RELEASE POINT

(MINIMUM)

2,54

0.10

140 Gauss

-140 Gauss

4,06

0.16

1,75

1

Unipolar - temperature

compensated

0.07

3,0

1.12

15,0

0.59

OPERATING POINT

(MAXIMUM)

115 Gauss

180 Gauss

390 Gauss

RELEASE POINT

(MINIMUM)

20 Gauss

75 Gauss

235 Gauss

REFERENCE

0,76

+

-

0

3 x

MAX

SS541AT

SS543AT

SS549AT

0.03

0,7

0.025

3 x

MAX

0,4

0.015

1,3

2 x

0.05

Bipolar latching- temperature

compensated

3,2

0.125

OPERATING POINT

(MAXIMUM)

85 Gauss

RELEASE POINT

(MINIMUM)

-85 Gauss

REFERENCE

+

-

0

SS561AT

SS566AT

180 Gauss

-180 Gauss

MAGNETIC RANGE

-670 to 670 Gauss

-840 to 840 Gauss

REFERENCE

SS495B

SS496B

43

www.honeywell.com/sensing

POSITION

POSITION SENSORS

2SS Series

SR13 Series

SR16 Series

Magnetoresistive digital

position sensor

Hall effect digital position

sensor

Cost effective

digital vane sensor

2SS Series position sensors have

SR13 series Hall-effect digital position sensors

permit quick and easy sensor installation, with

snap-in and flat mount sensor packages, and can

house any of the present SS400 series sensors or

any similarly sized sensing elements.

SR16 series competitively priced Hall-effect digital

vane sensors contain an internal magnet and Hall

effect sensor mounted in a twin tower

configuration.

magnetoresistive material integrated on silicon

and encapsulated in a plastic package. The

integrated circuit provides a digital output in

response to very low magnetic fields. Though this

signal is identical to our digital Hall effect sensors,

it can be achieved by magnetoresistive sensors at

much greater sensor-to-magnet distances.

Package style:

Supply voltage:

Operating temperature:

Dual tower

3.8 Vdc to 30 Vdc

-20 °C to 85 °C

-4 °F to 185 °F

Package style:

Plastic snap-in

3.8 Vdc to 30 Vdc

-40 °C to 150 °C

-40 °F to 302 °F

Supply voltage:

Operating temperature:

Supply voltage:

Operating temperature:

3.8 Vdc to 30 Vdc

-40 °C to 150 °C

-40 °F to 302 °F

25 Gauss

OPTIONS

Type J4

Maximum operating point:

Minimum release point:

5 Gauss

2x 5˚ MAX

2x 45

˚

1,6

3,1

0.06

4,5

0.12

0.18

IC CENTER

Type J6

3,1

0.12

2SS

4,5

0.18

OPTIONS

15,0

0.59

MAXIMUM Operating Point and MINIMUM

Release Point are specified @ 25 °C

- O +

Unipolar

OPERATING POINT

(MAXIMUM)

180 Gauss

115 Gauss

390 Gauss

RELEASE POINT

(MINIMUM)

75 Gauss

20 Gauss

235 Gauss

REFERENCE

SR13C-A1

SR13D-A1

SR13F-A1

OPTIONS

Omnipolar

Bipolar latching

PACKAGE STYLE

Radial lead IC

Surface Mount

REFERENCE

2SS52M

2SS52M-S

OPERATING POINT

(MAXIMUM)

RELEASE POINT

(MINIMUM)

REFERENCE

Type N

85 Gauss

-85 Gauss

SR13R-A1

PACKAGE STYLE

PCB/Molex 5557 connector

Wire exit

REFERENCE

SR16C-J4

SR16C-J6

SR16C-N

PCB mount leads

44

www.honeywell.com/sensing

POSITION SENSORS

POSITION

SR17 Series

Cost effective

digital vane sensor

SR17 series competitively priced Hall-effect digital vane sensors are designed for position and speed

sensing and are offered in a side-mount twin tower package.

Package style:

Side looker mounting

Supply voltage:

Operating temperature:

3.8 Vdc to 30 Vdc

-20 °C to 85 °C

-4 °F to 185 °F

OPTIONS

Type J6

Type J7

PACKAGE STYLE

Side mount wire exit

41 in wire leads and connector

REFERENCE

SR17C-J6

SR17C-J7

45

www.honeywell.com/sensing

INFRARED

Optoelectronics is the integration of optical principles and semi-conductor electronics. Optoelectronic

Infrared

Products

components are reliable, cost effective sensors. Standard infrared emitting diodes (IREDs), sensors and

assemblies are covered.

Infrared sensors are used for presence sensing, motion sensing, position encoding, limit sensing, movement

detection and counting.

Plastic package

Infrared emitting diodes

T1, end-emitting - SEP8505/8705

OPTIONS

Metal package, end-emitting

Coaxial, lead case - SE1450/1470(L)

Side-emitting - SEP8506/8706

Miniature pill - SE2460/2470

Side-emitting - SEP8736

TO-46, flat window - SE3455/3470

Operating temperature:

-40 °C to 85 °C (-40 °F to 185 °F)

OUTPUT WAVELENGTH (nm)

BEAM ANGLE (°)

POWER OUTPUT

REFERENCE

935

880

15

50

15

10

2.0 to 4.0 mW/cm²

0.33 to 0.52 mW/cm² SEP8506-002

2.7 to 7.8 mW/cm²

1.7 to 3.0 mW/cm²

SEP8505-003

SEP8705-003

SEP8736-003

TO-46, dome lensed - SE5455/5470

Ceramic discrete surface mount - glass lens

Operating temperature:

-55 °C to 125 °C (-67 °F to 257 °F)

OUTPUT WAVELENGTH (nm)

BEAM ANGLE (°)

POWER OUTPUT

REFERENCE

935

880

935

880

935

880

935

880

24

18

90

20

0.70 mW min.

1.10 to 4.50 mW/cm² SE1470-003L

SE1450-003L

Note:

1.00 mW min.

6.0 mW/sr min.

5.4 mW min.

10.5 mW min.

4.8 mW min.

SE2460-003

SE2470-002

SE3455-004

SE3470-003

SE5455-003

SE5470-004

This device can be mounted with the lens up or down, looking through PCB.

Operating temperature:

-55 °C to 125 °C (-67 °F to 257 °F)

OUTPUT WAVELENGTH (NM)

880

BEAM ANGLE (°)

24

POWER OUTPUT

REFERENCE

3.5 mW/cm² min.

0.60 mW/cm² min.

SME2470-021

46

www.honeywell.com/sensing

INFRARED

Phototransistors

OPTIONS

Metal package

Plastic package

Coaxial, lead case - SD1440(L)

T1, end-looking - SDP8405

Side-looking- SDP8406

Miniature pill - SD2440

TO-46, flat window - SD3443

Side-looking - SDP8436

TO-46, dome lensed - SD5443

Operating temperature:

-40 °C to 85 °C (-40 °F to 185 °F)

ANGULAR RESPONSE (°)

LIGHT CURRENT MINUMUM (mA)

REFERENCE

SDP8405-003

SDP8406-002

SDP8436-003

20

50

18

12.0

1.80

7.0

Ceramic discrete surface mount - glass lens

Top-looking - SMD2420/2440

Operating temperature:

-55 °C to 125 °C (-67 °F to 257 °F)

ANGULAR RESPONSE (°)

LIGHT CURRENT MINUMUM (mA)

REFERENCE

SD1440-003L

SD2440-004

SD3443-003

SD5443-003

24

48

90

18

3.0

7.0

2.0

8.0

Note:

This device can be mounted with the lens up or down, looking through PCB.

Operating temperature:

-55 °C to 125 °C (-67 °F to 257 °F)

ANGULAR RESPONSE (°)

28

LIGHT CURRENT MINUMUM (mA)

3.0

REFERENCE

SMD2440-012

47

www.honeywell.com/sensing

INFRARED

Optoschmitt detectors

Encoder sensors

Operating temperature:

Turn-on threshold irradiance:

Supply voltage:

-40 °C to 85 °C (-40 °F to 185 °F)

0.05 mW/cm² to 2.0 mW/cm²

4.5 Vdc to 5.5 Vdc

OPTIONS

Package style:

Plastic, PC mount

Metal package

TO-46, dome lensed

OPTIONS

Side-looking - HLC2705

Operating temperature:

Supply voltage:

Output:

-40 °C to 100 °C (-40 °F to 212 °F)

16.0 V

10 kOhm Pull-up

12°

Angular response:

PC mount - HOA0901/0902

OUTPUT LOGIC

Buffer

Inverter

Buffer

Inverter

TURN-ON THRESHOLD IRRADIANCE

REFERENCE

SD5600-001

SD5610-001

SD5620-001

SD5630-001

2.5 mW/cm² max.

0.25 mW/cm²

Plastic package

Side-looking

OUTPUT OPTION

Speed and direction

Direction, inverting logic

Speed and direction, 2 tachometer

REFERENCE

HLC2705-001

HOA0901-011

HOA0902-011

Operating temperature:

Supply voltage:

Output:

-40 °C to 85 °C (-40 °F to 185 °F)

16.0 V

10 kOhm Pull-up

50°

Angular response:

OUTPUT LOGIC

TURN-ON THRESHOLD IRRADIANCE

REFERENCE

Buffer

2.5 mW/cm² max.

SDP8600-001

NOTICE

Housings are soluble in chlorinated hydrocarbons and

ketones. Recommended cleaning agents are methanol and

isopropanol.

48

www.honeywell.com/sensing

INFRARED

Reflective sensors

OPTIONS

HOA Series

Metal components

Converging/focused optical axis - HOA0149

Converging/focused optical axis - HOA1180

Converging/focused optical axis - HOA2498

HOA1397

Operating temperature:

Output:

-55 °C to 100 °C (-67 °F to 212 °F)

Transistor

ON-STATE COLLECTOR CURRENT

REFERENCE

0.16 mA

HOA1180-002

HOA2498-002

Converging/focused optical axis - HOA1405

Plastic package

HLC1395 Series, short distance detection

Operating temperature:

Output:

-40 °C to 85 °C (-40 °F to 185 °F)

Transistor

ON-STATE COLLECTOR CURRENT

REFERENCE

0.60 mA

1.00 mA

0.70 mA

0.80 mA

HLC1395-002

HOA0149-001

HOA1397-002

HOA1405-002

Low profile

NOTICE

Housings are soluble in chlorinated hydrocarbons and

ketones. Recommended cleaning agents are methanol and

isopropanol.

49

www.honeywell.com/sensing

INFRARED

HOA1882

Aperture (emitter and detector):

Transmissive sensors,

Phototransistor output

Ø 1,52 mm (0.060 in)

OPTIONS

Metal components

HOA1877

Aperture (emitter and detector):

Ø 1,27 mm (0.050 in)

Plastic components, wire leads

HOA088X/089X

Wire colour code and functions

Red - IRED Anode

Black - IRED Cathode

White - Detector Collector

Green - Detector Emitter

Operating temperature:

Output:

-55 °C to 100 °C (-67 °F to 212 °F)

Transistor

ON-STATE COLLECTOR CURRENT

REFERENCE

0.1 mA

HOA1877-001

Plastic components

HOA086X/087X

HOA1870

Wire colour code and functions:

Orange - IRED Anode

Green - IRED Cathode

White - Detector Collector

Blue - Detector Emitter

0,15 mm (0.006 in) wide

Aperture (emitter and detector):

HOA1879

Operating temperature:

Output:

-40 °C to 85 °C (-40 °F to 185 °F)

Transistor

ON-STATE COLLECTOR CURRENT

REFERENCE

1.00 mA

HOA0866-T55

HOA0870-N51

HOA0880-P51

HOA0890-L55

HOA1870-031

HOA1879-015

HOA1882-012

NOTICE

Opaque housing

0.50 mA

0.30 mA

0.50 mA

1.80 mA

Housings are soluble in chlorinated hydrocarbons and

ketones. Recommended cleaning agents are methanol and

isopropanol.

50

www.honeywell.com/sensing

INFRARED

Transmissive sensors,

Optoschmitt output

OPTIONS

Plastic components, integral 3 pin connector

Plastic components

HOA7720/30

HOA096X/097X

HOA696X/697X

Operating temperature:

-40 °C to 70 °C (-40 °F to 158 °F)

OUTPUT

OUTPUT LOGIC HYSTERESIS REFERENCE

10 kOhm Pull-up

Open-Collector

Totem-Pole

Open-Collector

Totem-Pole

Buffer

Inverter

Buffer

Inverter

10 %

HOA0961-N51

HOA0971-N51

HOA6963-N51

HOA6972-N55

HOA6981-L51

HOA6990-T51

HOA7720-M22

HOA7730-M22

Opaque housing

10

%

5 %

Totem-Pole

Open-Collector

Plastic components, wire leads

HOA698X/699X

Wire colour code and functions:

Red - IRED Anode

Black - IRED Cathode

White - Detector Vcc

Blue - Detector Output

Green - Detector Ground

NOTICE

Housings are soluble in chlorinated hydrocarbons and

ketones. Recommended cleaning agents are methanol and

isopropanol.

51

www.honeywell.com/sensing

CURRENT

Current sensors monitor ac or dc current. Included are adjustable linear, null balance, digital, and linear current

sensors.

Current

Sensors

Digital current sensors can sound an alarm, start a motor, open a valve or shut down a pump. The linear signal

duplicates the waveform of the current being sensed, and can be used as a feedback element to control a motor or

regulate the amount of work being done by a machine.

OPTIONS

CSN Series

Closed Loop Current Sensors

Multi turn PCB mounted

Housing material:

Mounting:

Bayblend KU2-1468 (UL94-V0)

PCB on 13 pins

SENSED CURRENT RANGE COIL TURNS

SUPPLY VOLTAGE

REFERENCE

± 36 A

1000 (110 Ohm coil)

± 15 Vdc

CSNE151

DIRECTION

OF CURRENT

12,7 (0.50)

I +

31,8 (1.25)

Closed loop current sensors measure ac, dc and impulse currents over 0-25,

0-50, 0-100, 0-600 and 0-1200 Amp ranges. The CSN series is based on the

Hall effect principle and the null balance or zero magnetic flux method

(feedback system). The magnetic flux in the sensor core is constantly

controlled at zero. The amount of current required to balance zero flux is the

measure of the primary current flowing through the conductor, multiplied by

the ratio of the primary to secondary windings. This closed loop current is the

output from the device and presents an image of the primary current reduced

by the number of secondary turns at any time. This current can be expressed

as a voltage by passing it through a resistor.

4,0 (0.16)

20,3 (0.80)

-

+ 0

Ø 0,80 (0.03)

Secondary pin)

PIN 1

Ø 1,25 (0.05)

(Primary pin)

DIRECTION

OF CURRENT

I +

PIN 1

2,54 (0.100)

1,60 (0.06)

7,7 (0.27)

The CSN Series has a high overload capacity, a high level of electrical

insulation between primary and secondary circuits and a rapid response rate.

Lightweight and compact, and with no restriction on input current waveform,

the sensors are ideal for variable speed drives, power supplies, feedback

control systems, robotics/welding equipment and general overcurrent

protection.

2,9 (0.114)

7,75 (0.305)

2,54 (0.100)

9,50 (0.37)

Sensed current type:

EMC:

Accuracy:

ac or dc

EN 50082-2, EN 50081-2

± 0.5 %

SENSED

CURRENT RANGE

± 90 A

NOMINAL

CURRENT

25 A

COIL TURNS

SUPPLY VOLTAGE

REFERENCE

1000 (66 Ohm coil)± 12 Vdc to 15 Vdc

CSNE151-100

CSNE151-200

± 90 A

50 A

52

www.honeywell.com/sensing

CURRENT

Small housed style

Housing material:

Mounting:

Pinout style ‘B’

Bayblend FR 1440 (UL94-V0)

PCB on 3 pins

SENSED CURRENT RANGE COIL TURNS

SUPPLY VOLTAGE

± 12 to ± 15 Vdc

REFERENCE

CSNF161

CSNF151

CSNR151

CSNR161

± 150 A

± 180 A

± 200 A

1000 (30 Ohm coil)

SENSED CURRENT RANGE COIL TURNS

SUPPLY VOLTAGE

REFERENCE

CSNA111

CSNC241-500

CSNB121

2000 (100 Ohm coil)

1000 (30 Ohm coil)

± 70 A

± 90 A

± 100 A

1000 (90 Ohm coil)

± 15 Vdc

± 13 Vdc

± 15 Vdc

1000 (50 Ohm coil)

2000 (160 Ohm coil)

2000 (130 Ohm coil)

CSNB131

Small housed family

Housing material:

Mounting:

Bayblend KU2-1468 (UL94-V0)

PCB on 3 pins

Pinout style ‘A’

SENSED CURRENT RANGE COIL TURNS

SUPPLY VOLTAGE

± 12 to ± 15 Vdc

REFERENCE

CSNF161-002

CSNR151-002

CSNR161-002

± 150 A

± 200 A

1000 (30 Ohm coil)

2000 (100 Ohm coil)

1000 (30 Ohm coil)

SENSED CURRENT RANGE COIL TURNS

SUPPLY VOLTAGE

REFERENCE

CSNP661

CSNT651

CSNG251

± 90 A

1000 (30 Ohm coil)

± 12 to ± 15 Vdc

± 15 Vdc

± 150 A

± 180 A

2000 (100 Ohm coil)

SENSED CURRENT RANGE COIL TURNS

SUPPLY VOLTAGE

± 12 to ± 15 Vdc

REFERENCE

CSNP661-002

CSNT651-001

± 90 A

1000 (30 Ohm coil)

2000 (100 Ohm coil)

± 150 A

53

www.honeywell.com/sensing

CURRENT

CSN Series

CSLA Series

Closed Loop Current Sensors (Continued)

Open Loop Current Sensors

Mid range housed style

Housing material:

Mounting:

Bayblend KU2-1468 (UL94-V0)

Panel, spade terminals x 3

CS series linear current sensors incorporate our 91SS12-2 and SS94A1linear

output Hall effect transducer (LOHET™). These sensors cover measuring

ranges from 0-950 Amps. The sensing element is assembled in a printed

circuit board mountable housing. This housing is available in four

configurations. Normal mounting is with 0.375 inch long 4-40 screw and

square nut (not provided) inserted in the housing or a 6-20 self-tapping

screw. The combination of the sensor, flux collector, and housing comprises

the holder assembly. These sensors are ratiometric.

Sensed current type:

Housing:

ac or dc

PBT Polyester

OPTIONS

PCB bottom mount

SENSED CURRENT RANGE COIL TURNS

SUPPLY VOLTAGE

± 12 to ± 18 Vdc

REFERENCE

CSNJ481

CSNJ481-001

± 600 A

2000 (25 Ohm coil)

± 600 A (fitted with busbar) 2000 (25 Ohm coil)

Large housed style

Housing material:

Mounting:

Bayblend KU2-1468 (UL94-V0)

Panel, spade terminals x 3

SENSED CURRENT RANGE

0 to 75 A

0 to 92 A

0 to 150 A

0 to 225 A

0 to 325 A

0 to 400 A

SUPPLY VOLTAGE

8 to 16 Vdc

6 to 12 Vdc

8 to 16 Vdc

6 to 12 Vdc

8 to 16 Vdc

6 to 12 Vdc

REFERENCE

CSLA1DE

CSLA2DE

CSLA2DG

CSLA1DJ

CSLA2DJ

CSLA1DK

CSLA2DK

SENSED CURRENT RANGE COIL TURNS

SUPPLY VOLTAGE

± 15 to ± 24 Vdc

REFERENCE

CSNK591

CSNK591-001

± 1200 A

5000 (50 Ohm coil)

± 1200 A (fitted with busbar) 5000 (50 Ohm coil)

54

www.honeywell.com/sensing

CURRENT

PCB bottom mount

PCB side mount

SENSED CURRENT RANGE

SUPPLY VOLTAGE

REFERENCE

± 45 A

4.5 to 10.5 Vdc

CSLH3A45

Digital current sensor

SENSED CURRENT RANGE

0 to 57 A

0 to 72 A

0 to 100 A

0 to 150 A

SUPPLY VOLTAGE

8 to 16 Vdc

6 to 12 Vdc

8 to 16 Vdc

REFERENCE

CSLA1CD

CSLA2CD

CSLA1CF

CSLA1CH

PCB bottom mount

SENSED CURRENT RANGE

0 to 310 A

0 to 550 A

0 to 625 A

0 to 765 A

SUPPLY VOLTAGE

6 to 12 Vdc

8 to 16 Vdc

6 to 12 Vdc

REFERENCE

CSLA2EJ

CSLA2EL

CSLA1EL

CSLA2EM

CSLA2EN

0 to 950 A

PCB side mount

OPERATE CURRENT

SUPPLY VOLTAGE

REFERENCE

3.5 A.t Nominal

6 to 16 Vdc

CSDA1BC

SENSED CURRENT RANGE

0 to 57 A

0 to 72 A

SUPPLY VOLTAGE

8 to 16 Vdc

6 to 12 Vdc

REFERENCE

CSLA1GD

CSLA2GD

55

www.honeywell.com/sensing

LIQUID LEVEL

Honeywell liquid level sensor components incorporate a voltage level switch which provides a digital

output that denotes the presence or absence of liquid.

Liquid Level

Sensors

The mode of operation is derived from the principle of total internal reflection. An LED and detector are

housed within a plastic dome at the head of the device. When no liquid is present, all light from the LED is

totally internally reflected from the dome boundary to the detector. When liquid covers the dome, the

effective refractive index at the dome/liquid boundary changes, allowing some light from the LED to

escape. Thus the amount of light received by the voltage level switch is reduced and the output switches,

denoting the presence of liquid. This method of liquid level sensing is very fast, and instantaneous for

water.

The LL Series is a basic component which requires external circuit protection; this protection is

incorporated in the LLE Series.

Housing:

Polysulphone

250 mm lead wires

+5 Vdc

Termination:

Supply voltage:

Pressure range:

0 to 5 bar

Type 5

LL Series

LLE Series

Operating temperature:

Standard

Operating temperature:

-25 °C to 80 °C

-13 °F to 176 °F

-30 °C to 85 °C

-22 °F to 185 °F

-20 °C to 85 °C

-4 °F to 185 °F

-40 °C to 125 °C

-40 °F to 257 °F

Storage temperature:

High temperature

Vcc

RED

Storage temperature:

Standard

-40 °C to 100 °C

-40 °F to 212 °F

-50 °C to 150 °C

-58 °F to 302 °F

VOLTAGE

REGULATOR

SEAL WASHER

Nitrile rubber

REFERENCE

LL105100

High temperature

OUTPUT

GREEN

SCHMITT

TRIGGER

IRED

PHOTO

TRANSISTOR

0 V

BLUE

OPTIONS

Type 2

OPTIONS

Type 2

22,49

(0.89)

19,40

(0.76)

12,45

(0.49)

19,00

(0.75)

4,70

(0.19)

(0.01 in²

)

0,22 mm²

Tinned Ends

SEAL WASHER

Vamac

REFERENCE

LL102101

SEAL WASHER

Nitrile rubber

REFERENCE

LLE102000

High temperature

Type 3

Type 5

+0.004

-0

(0.39

)

+0,10

-0

16,12

(0.63)

Ø10,00

2,3

(0.09)

4,1

(0.16)

(0.01 in²) 0,22 mm ²

Tinned Ends

SEAL WASHER

Nitrile rubber

Vamac

REFERENCE

LL103000

LL103101

Standard

High temperature

13,0

(0.51)

SEAL WASHER

Nitrile rubber

REFERENCE

LLE105000

56

www.honeywell.com/sensing

BASIC SWITCHES

These listings include standard size basics, miniature, subminiature, switches. The precision snap-

action mechanisms are offered with a wide variety of actuators and operating characteristics. Basic

switches are ideal for applications requiring compactness, light weight, accurate repeatability and

long life.

Basic Switches

They are best used for presence/absence detection where physical contact with object is

permissible. Very economical.

Overtravel plunger - standard

Overtravel plunger (splash resistant)

BA/BE/BZ Series

Basic Switches

BA/BE/BZ Series Standard Basic Switches are

used for simple or precision on/off application

needs.

As well as the catalogue listings presented here,

we offer other versions with higher temperature

ratings, different termination options, different

electrical ratings and Single Pole, Single Throw

(SPST) circuitry. Refer to our website for details.

Voltage:

Electrical rating:

Operating temperature:

250 Vac

16 A

-55 °C to 85 °C

-67 ° F to 185 °F

Screw

ELECTRICAL RATING

REFERENCE

BZ-2RD-A2

BA-2RB-A2

20 A

Termination:

Contact type:

Approvals:

Panel mount overtravel plunger

Silver

CE, CSA, UL

SPDT

REFERENCE

BZ-2RDS-A2

Switching options:

Stainless steel spring

BZ-2RDS-A2S

Single Pole, Double Throw

Overtravel roller plunger

OPTIONS

Note: BA/BE plunger position distance from

mounting hole = 19 mm (0.75 in)

Top pin plunger

ELECTRICAL

RATING

APPROVALS

REFERENCE

BZ-2RQ1-A2

BA-2RQ1-A2

20 A

DEMKO

REFERENCE

BZ-2RQ18-A2

Approvals:

BE-2R-A4

CSA, UL

ELECTRICALRATING

TERMINATION

Solder

REFERENCE

BZ-R

Screw

Solder

Screw

BZ-R-A2

BZ-R169

BZ-2R-A2

BE-2R-A4

25 A

57

www.honeywell.com/sensing

BASIC SWITCHES

BA/BE/BZ Series

Basic Switches

(Continued)

DT Series Basic Switch

TB Series

Miniature Double-break

Basic Switch

TB Series Miniature Double-break Basic Switches

are basic double-break units that offer a means of

controlling isolated circuits. Each circuit may be

driven by an independent voltage source.

DT Series Standard Basic Switches consist of

two independent single-pole double throw

circuits in one housing actuated by one

actuator. The terminals are separated by a non-

conductive shield to reduce shorting.

Overtravel roller plunger,

perpendicular

Voltage:

Electrical rating:

Operating temperature:

250 Vac

10 A

-55 °C to 85 °C

-67 ° F to 185 °F

Screw

Voltage:

Electrical rating:

Operating temperature:

250 Vac

10 A

-55 °C to 125 °C

-67 ° F to 257 °F

Solder

Termination:

Contact type:

Approvals:

Silver

CSA, UL

Termination:

Contact type:

Approvals:

Switching options:

DPDT

Silver

CSA, UL

Double Pole, Double Throw

Switching options:

(SPDT DB)

Single Pole, Double Throw, Double Break

REFERENCE

BZ-2RQ181-A2

OPTIONS

Top pin plunger

Straight lever

Dimensions in inches

1.825 REF

1.57

0.87 DIA HOLE IN TERMINALS (4)

0.53

0.13

0.50

0.20

0.24

0.15

PLASTIC PLUNGER

0.260

0.22

0.113 ± .002 DIA

0.16 R

0.06 MAX PRETRAVEL

0.101 _-^+.002

.001

REFERENCE

DT-2R-A7

0.46

OPERATING

POSITION

4

1

3

2

0.312 ± .003

0.50

0.25

0.03

0.09

ELECTRICAL APPROVALS LEVER RADIUS

RATING

REFERENCE

0.365

0.532 ± .003

0.101 _-^+._.⁰₀⁰₀²₁DIA HOLE

20 A

DEMKO

BA-2RV-A2

BZ-2RW80-A2

No return spring BZ-2RW84-A2

1.25

NOTE-

1 - TERMINALS 1 & 2 NORMALLY CLOSED CIRCUIT

2 - TERMINALS 3 & 4 NORMALLY OPEN CIRCUIT

3 - TERMINALS ARE PLATED FOR SOLDERING

Basic Switch Accessories

A range of accessories is available for BA, BE, BZ

and DT switches, such as the 5PA2 terminal

enclosure. For more information please contact

your local sales office.

152,4 mm

BZ-2RW863-A2

Roller lever

REFERENCE

1TB1-2

TERMINATION LEVER

RADIUS

REFERENCE

BZ-2RW822-A2

BZ-2RW822

Solder

Splash resistant

BZ-2RW8225551-A2

One way, BZ-2RW826-A2

32,1 mm

48,3 mm BZ-2RW82-A2

58

www.honeywell.com/sensing

BASIC SWITCHES

SM and SX Series

Subminiature

Basic Switches

SM Series

Approvals:

SX Series

Approvals:

CE, CSA, UL

5 A

CE, CSA, UL

5 A

Ampere rating:

OPTIONS

SM and SX Series Subminiature Basic Switches

are used for simple or precision on/off application

needs. These switches combine small size and

light weight with ample electrical capacity,

precision operation and long life. The SX Series

are small, precision, snap-action switches that are

ideal where savings in space and weight are

important.

Top pin plunger

Voltage:

Operating temperature:

250 Vac

-55 °C to 125 °C

-67 ° F to 257 °F

Solder

Termination:

Approvals: 11SM601-H4

TERMINATION

UL, CSA

Approvals:

6SX7-T

UL, CSA

Contact type:

Switching options:

Silver

SPDT

REFERENCE

CONTACTS

Silver

AMPERE RATING

REFERENCE

11SM1

7 A

3 A

1 A

1SX1-T

11SX1-T

6SX7-T

Single Pole, Double Throw

Quick connect

11SM601-H4

Gold

Straight lever

REFERENCE

Lever length 4,83 mm

111SM1

REFERENCE

311SX2-T

311SX3-T

Roller lever

Lever length ‘A’ 12,8 mm

Lever length ‘A’ 24,5 mm

Simulated roller

REFERENCE

111SM2-T

REFERENCE

311SX5-T

59

www.honeywell.com/sensing

BASIC SWITCHES

Straight lever

ZM, ZX, ZV and ZW Series Subminiature

Basic Switches

ZM, ZX, ZV and ZW Series Subminiature Basic Switches are cost-

effective devices used for simple on/off applications. These switches

combine small size and light weight with ample electrical capability and

long life. Plastic lever capability is available on the ZV Series.

Electrical rating:

Voltage:

0.1 A, 3 A, 5 A or 10.1 A

125/250 Vac

Operating temperature:

Termination:

Contact type:

25 °C to 85 °C [-13 °F to 185 °F]

Quick connect, solder, PCB

Gold or silver

Switching options:

SPDT

ZM Series

Approvals:

UL/CSA

Electrical rating:

0.1 A, 5 A or 10.1 A

TERMINATION

Quick connect

Solder

ELECTRICAL RATING

5 A

CONTACT TYPE

silver

REFERENCE

ZM50E70D01

ZM50E10D01

OPTIONS

Top pin plunger

Simulated roller lever

TERMINATION

Quick connect

Solder

ELECTRICAL RATING

5 A

CONTACT TYPE

silver

REFERENCE

ZM50E70E01

ZM50E10E01

TERMINATION

Quick connect

Solder

PCB

Solder

ELECTRICAL RATING

5 A

10.1 A

0.1 A

CONTACT TYPE

silver

gold

REFERENCE

ZM50E70A01

ZM50E10A01

ZM90G20A01

ZM10B10A01

60

www.honeywell.com/sensing

BASIC SWITCHES

Simulated roller lever

ZX Series

Approvals:

UL/CSA

Electrical rating:

0.1 A or 3 A

5.7

0.224

OPTIONS

12.7

0.5

2.9

0.114

Top pin plunger

1.12

0.044

3.4

5.2

0.134

0.205

12.7

0.5

5.7

0.224

5.2

0.205

2.9

1.12

0.114

0.044

é2.05

é2.2

é0.081

é0.087

0.9

6.5

3.15

0.4

0.035

0.256

0.124

0.016

1.24

5.08

0.2

5.08

0.2

0.049

5.8

12.8

0.228

0.504

é2.05

é2.2

é0.081

é0.087

TERMINATION

PCB

Solder

ELECTRICAL RATING

3 A

CONTACT TYPE

silver

REFERENCE

ZX40E30E01

ZX40E10E01

0.9

6.5

3.15

0.4

0.035

5.08

0.256

0.124

0.016

1.24

5.08

0.2

0.049

5.8

0.2

12.8

0.228

0.504

ZV Series

Approvals:

Electrical rating:

UL/ENEC

0.1 A, 5 A or 10.1 A

TERMINATION

PCB

Solder

ELECTRICAL RATING

3 A

0.1 A

CONTACT TYPE

silver

gold

REFERENCE

ZX40E30A01

ZX10C10A01

OPTIONS

Straight lever

Top pin plunger

12.7

0.5

5.7

0.224

2.9

0.114

1.12

0.044

3.4

5.2

0.134

0.205

é2.05

é2.2

é0.081

é0.087

0.9

0.035

5.08

6.5

0.256

3.15

0.124

0.4

0.016

1.24

5.08

0.2

0.049

5.8

0.2

12.8

0.228

0.504

TERMINATION

PCB

Solder

ELECTRICAL RATING

3 A

CONTACT TYPE

silver

REFERENCE

ZX40E30C01

ZX40E10C01

TERMINATION

PCB

Solder

ELECTRICAL RATING

5 A

0.1 A

CONTACT TYPE

silver

REFERENCE

ZV50E20A01

ZV50E10A01

ZV10B70A01

Quick connect

gold

61

www.honeywell.com/sensing

BASIC SWITCHES

Straight lever

BASIC SWITCHES

ZW Sealed Series

Approvals:

UL/ENEC

Electrical rating:

0.1 A or 5 A

OPTIONS

Top pin plunger

TERMINATION

Solder

Quick connect

ELECTRICAL RATING

5 A

CONTACT TYPE

silver

REFERENCE

ZV50E10B01

ZV50E70C01

Roller lever

TERMINATION

ELECTRICAL RATING

CONTACT TYPE

REFERENCE

Solder

5 A

silver

ZW50F15AD1

Straight lever

TERMINATION

PCB

Quick connect

ELECTRICAL RATING

5 A

CONTACT TYPE

silver

REFERENCE

ZV50E20F01

ZV50E70F01

TERMINATION

ELECTRICAL RATING

CONTACT TYPE

REFERENCE

Solder

0.1 A

gold

ZW10E15CD1

62

www.honeywell.com/sensing

BASIC SWITCHES

Roller lever

BASIC SWITCHES

TERMINATION

Wire leads

ELECTRICAL RATING

0.1 A

CONTACT TYPE

gold

REFERENCE

ZW10E90FW1

63

www.honeywell.com/sensing

BASIC SWITCHES

Straight lever

Type B

Roller lever

Type D

V5 Series

Miniature Basic Switches

V5 Series Basic Switches are used for simple or

precision on/off, end of limit, presence/absence,

pressure, temperature and manual operator

interface application needs.

1,6

(P.T.)

20,6

1,6

(P.T.)

22

8,1

20,6

(O.P.)

15,3

(O.P.)

Voltage:

Operating temperature:

Standard

250 Vac

-55 °C to 85 °C

-67 °F to 185 °F

-55 °C to 150 °C

-67 °F to 302 °F

High temperature

APPROVALS

CE, CSA, ENEC, UL

REFERENCE

V5B210CB3D

V5C010BB3D

Termination:

6,3 mm x 0,8 mm Quick connect

(QC)

High temperature

APPROVALS

CE, CSA, ENEC, UL

REFERENCE

V5C010BB3B

Contact type:

Silver/silver cadmium oxide

Electrical rating:

V5A

V5B/P/R

V5C/D

V5S

20 A

16 A

10 A

22 A

SPDT

Type E

Type C

3,2

(P.T.)

3,2

(P.T.)

34

Switching options:

35,6

Single Pole Double Throw

8,1

20,6

(O.P.)

15,3

(O.P.)

OPTIONS

Top pin plunger

22,2

20,2

2,8

Ø3,1

APPROVALS

CE, CSA, ENEC, UL

CE, ENEC

REFERENCE

V5A010CB4E

V5B210CB1E

14,7

Operating

position

APPROVALS

CE, ENEC

REFERENCE

V5B210CB1C

3,1

Lever position 2

High temperature

10,3

NC 2

NO 4

High temperature

2,8 15,9

C1

Type G

3,4

28,8

6,4

(P.T.)

Lever slot position 2

4,4

Lever slot position 1

59,5

8,1

10,3

8,1

14,1

15,3

(O.P.)

2,8

APPROVALS

CE, ENEC

CE, CSA, ENEC, UL

CE, CSA, UL

CE, ENEC

CE, CSA, ENEC, UL

CE, ENEC

REFERENCE

V5A010CB

V5B010CB3

V5B010FB3

V5B010TB

V5B210CB

V5C010BB

V5C010EB3

V5C010TB3

V5P010CB

APPROVALS

REFERENCE

4,8 mm x 0,5 mm QC

Solder terminals

High temperature

CE, ENEC

V5C010BB1G

4,8 mm x 0,5 mm QC

Solder terminals

APPROVALS

CE, ENEC

CE, BEAB

SWITCHING OPTIONS

REFERENCE

V5D030BB

V5R030CB

V5S020CB

V5S030CB

SPNO

SPNC

SPNO

64

www.honeywell.com/sensing

BASIC SWITCHES

AVAILABLE TERMINALS

Quick Connect (QC)

OPTIONS

V7 Series

Miniature Basic Switches

V5 and V7 Series Basic Switches are used for

simple or precision on/off, end of limit, presence/

absence, pressure, temperature and manual

operator interface application needs.

Top pin plunger

10,2

.40

6,4

.25

20,2

.80

2,8

.11

2,8

.11

1,0

.04

2,90

The V7 Series also offers listings with Single Pole,

Single Throw circuitry (available in either normally

open (NO) or normally closed (NC)

Ø hole (3,10/.122 option)

.114

10,3

.41

D8 terminals are European approved when used

with electrical ratings A, B, D, E or S. International

approving agencies require that switches with

these terminals have insulated receptacles or

connector.

2,8

.11

1,5

0.06

8,9

.35

configurations). Refer to our website for details.

NC

NO

18,2

.72

Operating temperature:

COM

MAX

Standard

-40 °C to 82 °C

-40 °F to 180 °F

-40 °C to 200 °C

-40 °F to 350 °F

Quick connect (QC)

2,90

.114

3,10

.122

OPT

0,8

(3)

3,20

.126

3,46

.134

OPT

2,4

.10

14,4

.57

DIA

.03

22,2

.88

28,8

1.14

High temperature

Termination:

Note: The optional mounting hole dimensions

shown above are standard on V5/V7 International

Series switches.

D8, E8 - 4,8 mm (0.187 in) x 0.5 mm (0.02 in)

E9 - 6,35 mm (0.25 in) x 0,80 mm (0.032 in)

Printed circuit board (PCB)

Electrical rating

5 A

Contact Type

Silver

E8 terminals are European approved when used

with electrical ratings A, B, D, E or S.

VOLTAGE

250 Vac

277 Vac

125 Vac

277 Vac

125 Vac

277 Vac

250 Vac

277 Vac

125 Vac

250 Vac

277 Vac

125 Vac

250 Vac

125 Vac

277 Vac

TERMINATION

REFERENCE

V7-1A17D8

V7-1A17P02

V7-1B17D8

V7-1B19E9

V7-1C17D8

V7-1C17E9

V7-1C18E9

V7-1D10D8

V7-1E10D8

V7-1E17P02

V7-1E19E9

V7-1S17D8

V7-1V19E9

V7-1Z19E9

V7-2A17E9

V7-2B17D8

V7-2B17E9

V7-2B17P02

V7-2S17D8

V7-3A17D8

V7-3E10E8

V7-3E10E9

V7-3E17D8

V7-3E17E9

V7-3E19E9

V7-3S17E9

V7-4A17D8

V7-4A18E9

V7-4S17D8

V7-5D17E9

V7-6B19D8

V7-6C17D8

V7-7A19D8

V7-*A

V7-*B

V7-*C/W

V7-*D

V7-*E

V7-*S

V7-*V

V7-*Z

11 A

15 A

1 A

10 A

Silver

Gold alloy

Silver

Gold alloy

Silver alloy

PCB

100 mA

21 A

25 A Silver cadmium oxide

CSA, UL, ENEC

PCB

Approvals:

V7-*C/D/W

Switching options:

E9 terminals are European approved when used

with electrical ratings A, B, D, E, S, V or Z.

CSA, UL

SPDT

Single Pole Double Throw

Printed circuit board (PO2)

Straight lever

Type -002

These terminals interface with snap-on receptacles

and other components from AMPNODU

interconnection system.

PCB terminals are European approved when used

with electrical ratings A, B, D, E, S.

VOLTAGE

277 Vac

REFERENCE

V7-1C17D8-002

V7-1C17E9-002

V7-2B17E9-002

V7-6C18D8-002

65

www.honeywell.com/sensing

BASIC SWITCHES

Roller lever

Type -201

V7 Series

Miniature Basic Switches

(Continued)

Straight lever

Type -022

VOLTAGE

277 Vac

125 Vac

277 Vac

125 Vac

277 Vac

REFERENCE

V7-1C17D8-201

V7-1C17E9-201

V7-1S17D8-201

V7-2B17D8-201

V7-2S17D8-201

V7-7B17D8-201

VOLTAGE

250 Vac

277 Vac

125 Vac

250 Vac

277 Vac

125 Vac

277 Vac

125 Vac

REFERENCE

Type -207

V7-1A17D8-022

V7-1B19D8-022

V7-1C17D8-022

V7-1C18E9-022

V7-1S17D8-022

V7-2A17D8-022

V7-2B17D8-022

V7-2S17D8-022

V7-3E17E9-022

V7-3S17D8-022

V7-3S17E9-022

VOLTAGE

277 Vac

125 Vac

277 Vac

250 Vac

277 Vac

125 Vac

REFERENCE

Type -048

V7-1B10E9-207

V7-1C17D8-207

V7-1C17E9-207

V7-1S17D8-207

V7-1V19E9-207

V7-2A17D8-207

V7-2B17D8-207

V7-7D17D8-207

Simulated roller lever

Type -263

VOLTAGE

277 Vac

125 Vac

277 Vac

250 Vac

REFERENCE

V7-1B17D8-048

V7-1C17D8-048

V7-1V19E9-048

V7-2B17D8-048

V7-2B19E9-048

V7-3S17D8-048

V7-6C18D8-048

V7-9W1AE9-048

High temperature

VOLTAGE

277 Vac

125 Vac

277 Vac

REFERENCE

V7-1B17D8-263

V7-1C17D8-263

V7-1S17D8-263

V7-2S17D8-263

V7-3S17E9-263

V7-6C17D8-263

V7-7B19D8-263

66

www.honeywell.com/sensing

INDEX

Index

111-103EAJ-H01 ...................................... 22

111-104HAK-H01 ..................................... 22

111-202CAK-B01 ..................................... 22

111-202CAK-H01 ..................................... 22

111-303EAK-B01 ..................................... 22

111-802EAJ-B01 ...................................... 22

111-802EAJ-H01 ...................................... 22

111SM1 .................................................... 59

111SM2-T ................................................ 59

11SM1 ...................................................... 59

11SM601-H4 ............................................ 59

11SX1-T ................................................... 59

112-102EAJ-B01 ...................................... 21

112-103FAJ-B01 ...................................... 21

112-103FAJ-H01 ...................................... 21

112-104KAJ-B01 ...................................... 21

112-104KAJ-H01 ...................................... 21

112-105PAJ-B01 ...................................... 21

112-201BAJ-B01 ...................................... 21

112-202EAJ-B01 ...................................... 21

112-202EAJ-H01 ...................................... 21

112-203HAJ-B01 ...................................... 21

112-204KAJ-B01 ...................................... 21

112-502EAJ-B01 ...................................... 21

112-502EAJ-H01 ...................................... 21

112-503JAJ-B01 ...................................... 21

112-504NAJ-B01 ...................................... 21

112-604NAJ-H01 ...................................... 21

115-202CDK-801 ..................................... 23

115-802EDJ-801 ...................................... 23

120-102EAJ-Q01 ...................................... 22

120-103FAJ-Q01 ...................................... 22

120-104KAJ-Q01 ...................................... 22

120-202EAJ-Q01 ...................................... 22

120-502JAJ-Q01 ...................................... 22

121-102EAJ-Q01 ...................................... 22

121-103FAJ-Q01 ...................................... 22

121-104KAJ-Q01 ...................................... 22

121-105PAJ-Q01 ...................................... 22

121-106QAJ-Q01 ...................................... 22

121-202EAJ-Q01 ...................................... 22

121-202KAJ-Q01 ...................................... 22

121-502EAJ-Q01 ...................................... 22

121-502JAJ-Q01 ...................................... 22

121-504NAJ-Q01 ...................................... 22

135-102DAG-J01 ...................................... 18

135-103FAF-J01 ....................................... 18

135-103FAG-J01 ...................................... 18

135-103LAF-J01 ....................................... 18

135-103LFW-J01 ...................................... 18

135-104LAF-J01 ....................................... 18

135-104LAG-J01 ...................................... 18

135-104LFW-J01 ...................................... 18

135-105QAG-J01 ...................................... 18

135-202FAG-J01 ...................................... 18

135-203LAG-J01 ...................................... 18

135-203LFW-J01 ...................................... 18

135-204QAG-J01 ...................................... 18

135-302FAG-J01 ...................................... 18

135-303KAG-J01 ...................................... 18

135-303LFW-J01 ...................................... 18

135-502FAF-J01 ....................................... 18

135-502FAG-J01 ...................................... 18

135-503LAF-J01 ....................................... 18

135-503LAG-J01 ...................................... 18

135-503LFW-J01 ...................................... 18

135-504QAG-J01 ...................................... 18

140-102FAG-RB1 ..................................... 20

140-103LAG-RB1 ..................................... 20

140-104QAG-RB1 ..................................... 20

140-302LAG-RB1 ..................................... 20

140-501FAG-RB1 ..................................... 20

140-502LAG-RB1 ..................................... 20

140-503QAG-RB1 ..................................... 20

141PC15G .................................................. 9

142-102FAG-RB1 ..................................... 21

142-103LAG-RB1 ..................................... 21

142-104QAG-RB1 ..................................... 21

142-302LAG-RB1 ..................................... 21

142-501FAG-RB1 ..................................... 21

142-502LAG-RB1 ..................................... 21

142-503QAG-RB1 ..................................... 21

142PC01D .................................................. 9

142PC01G .................................................. 9

142PC02G .................................................. 9

142PC05D .................................................. 9

142PC05D97 .............................................. 9

142PC05G .................................................. 9

142PC15A .................................................. 9

142PC15AW95 ........................................... 9

142PC15G .................................................. 9

143-101FAG-RC1 ..................................... 20

143-102LAG-RC1 ..................................... 20

143-103QAG-RC1 ..................................... 20

143-201FAG-RC1 ..................................... 20

143-302LAG-RC1 ..................................... 20

143-303QAG-RC1 ..................................... 20

143-501FAG-RC1 ..................................... 20

143-502LAG-RC1 ..................................... 20

143-503QAG-RC1 ..................................... 20

143PC03D .................................................. 9

143PC05DW ............................................... 9

145-101FAG-RC1 ..................................... 21

145-102LAG-RC1 ..................................... 21

145-103QAG-RC1 ..................................... 21

145-201FAG-RC1 ..................................... 21

145-301FAG-RC1 ..................................... 21

145-302LAG-RC1 ..................................... 21

145-303QAG-RC1 ..................................... 21

145-501FAG-RC1 ..................................... 21

145-502LAG-RC1 ..................................... 21

145-503QAG-RC1 ..................................... 21

162PC01D .................................................. 9

163PC01D36 .............................................. 9

163PC01D48 .............................................. 9

163PC01D61 .............................................. 9

163PC01D75 .............................................. 9

164PC01D37 .............................................. 9

164PC01D76 .............................................. 9

1865-01G-L-N .......................................... 14

1865-02G-L-N .......................................... 14

1865-03G-L-N .......................................... 14

1865-04G-L-N .......................................... 14

1865-05G-L-N .......................................... 14

1865-01G-K-N .......................................... 14

1865-02G-K-N .......................................... 14

1865-03G-K-N .......................................... 14

1865-04G-K-N .......................................... 14

1865-05G-K-N .......................................... 14

192-102DET-A01. ..................................... 20

192-102DEV-A01 ..................................... 20

192-102DEW-A01 .................................... 20

192-103LET-A01 ...................................... 20

192-103LEV-A01 ...................................... 20

192-103LEW-A01 ..................................... 20

192-104QET-A01 ...................................... 20

192-104QEV-A01 ..................................... 20

192-104QEW-A01 .................................... 20

192-222LET-A01 ...................................... 20

192-222LEV-A01 ...................................... 20

192-222LEW-A01 ..................................... 20

192-302LET-A01 ...................................... 20

192-302LEV-A01 ...................................... 20

192-302LEW-A01 ..................................... 20

192-303KET-A01 ...................................... 20

192-303KEV-A01 ..................................... 20

192-303KEW-A01 .................................... 20

192-303QET-A01 ...................................... 20

192-303QEV-A01 ..................................... 20

192-303QEW-A01 .................................... 20

192-502LET-A01 ...................................... 20

192-502LEV-A01 ...................................... 20

192-502LEW-A01 ..................................... 20

192-503QET-A01 ...................................... 20

192-503QEV-A01 ..................................... 20

192-503QEW-A01 .................................... 20

195-101CAG-A01 ..................................... 19

195-102DAG-A01 ..................................... 19

195-103LAG-A01 ..................................... 19

195-104QAG-A01 ..................................... 19

195-202LAG-A01 ..................................... 19

195-203LAG-A01 ..................................... 19

195-301CAG-A01 ..................................... 19

195-302LAG-A01 ..................................... 19

195-303KAG-A01 ..................................... 19

195-501DAG-A01 ..................................... 19

195-502LAG-A01 ..................................... 19

195-503QAG-A01 ..................................... 19

197-101CAG-A01 ..................................... 19

197-102DAG-A01 ..................................... 19

197-103LAG-A01 ..................................... 19

197-104QAG-A01 ..................................... 19

197-202LAG-A01 ..................................... 19

197-203LAG-A01 ..................................... 19

197-301CAG-A01 ..................................... 19

197-302LAG-A01 ..................................... 19

197-303KAG-A01 ..................................... 19

197-501DAG-A01 ..................................... 19

197-502LAG-A01 ..................................... 19

197-503QAG-A01 ..................................... 19

198-101CAG-A01 ..................................... 19

198-102DAG-A01 ..................................... 19

198-103LAG-A01 ..................................... 19

67

www.honeywell.com/sensing

INDEX

CPXL04DF ..................................................5

CSDA1BC .................................................55

CSLA1CD .................................................55

CSLA1CF .................................................. 55

CSLA1CH .................................................55

CSLA1DE .................................................. 54

CSLA1DJ .................................................. 54

CSLA1DK .................................................54

CSLA1EL .................................................. 55

CSLA1GD .................................................55

CSLA2CD .................................................55

CSLA2DE ..................................................54

CSLA2DG .................................................54

CSLA2DJ ..................................................54

CSLA2DK .................................................54

CSLA2EJ ..................................................55

CSLA2EL ..................................................55

CSLA2EM .................................................55

CSLA2EN ..................................................55

CSLA2GD .................................................55

CSLH3A45 ................................................55

CSNA111 ..................................................53

CSNB121 ..................................................53

CSNB131 ..................................................53

CSNC241-500 ..........................................53

CSNE151 ..................................................52

CSNE151-100 ...........................................52

CSNE151-200 ...........................................52

CSNF151 ..................................................53

CSNF161 ..................................................53

CSNF161-002 ...........................................53

CSNG251 ..................................................53

CSNJ481 ..................................................54

CSNJ481-001 ...........................................54

CSNK591 ..................................................54

CSNK591-001 ..........................................54

CSNP661 ..................................................53

CSNP661-002 ..........................................53

CSNR151 ..................................................53

CSNR151-002 ..........................................53

CSNR161 ..................................................53

CSNR161-002 ..........................................53

CSNT651 ..................................................53

CSNT651-001 ...........................................53

DC001NDC4 ...............................................6

DC005NDR4 ...............................................6

DCXL01DN .................................................6

DCXL10DN .................................................6

DT-2R-A7 ..................................................58

DUXL01D ....................................................6

DUXL10D ....................................................6

DXXX-001 ................................................40

DXXX-002 ................................................40

DXXX-003 ................................................40

FS300-100 ................................................39

FSG15N1A ................................................13

FSL05N2C ................................................13

Heaters

198-104QAG-A01 ..................................... 19

198-202LAG-A01 ..................................... 19

198-203LAG-A01 ..................................... 19

198-301CAG-A01 ..................................... 19

198-302LAG-A01 ..................................... 19

198-303KAG-A01 ..................................... 19

198-501DAG-A01 ..................................... 19

198-502LAG-A01 ..................................... 19

198-503QAG-A01 ..................................... 19

199-101CAG-A01 ..................................... 19

199-102DAG-A01 ..................................... 19

199-103LAG-A01 ..................................... 19

199-104QAG-A01 ..................................... 19

199-202LAG-A01 ..................................... 19

199-203LAG-A01 ..................................... 19

199-301CAG-A01 ..................................... 19

199-302LAG-A01 ..................................... 19

199-303KAG-A01 ..................................... 19

199-501DAG-A01 ..................................... 19

199-502LAG-A01 ..................................... 19

199-503QAG-A01 ..................................... 19

1SX1-T ..................................................... 59

1TB1-2 ..................................................... 58

24PC01SMT ............................................... 5

24PC05SMT ............................................... 5

24PC15SMT ............................................... 5

24PCAFA6G ................................................ 4

24PCBFA6D ................................................ 4

24PCBFA6G ................................................ 4

24PCCFA6D ................................................ 4

24PCCFA6G ................................................ 4

24PCCFG6G ................................................ 4

24PCDFA6D ................................................ 4

24PCDFA6G ................................................ 4

24PCDFG6G ................................................ 4

24PCEFA6D ................................................ 4

24PCEFA6G ................................................ 4

24PCFFA6D ................................................ 4

24PCFFA6G ................................................ 4

26PC01SMT ............................................... 5

26PC05SMT ............................................... 5

26PC15SMT ............................................... 5

26PCAFA6D ................................................ 4

26PCAFA6G ................................................ 4

26PCAFG6G ................................................ 4

26PCBFA6D ................................................ 4

26PCBFA6G ................................................ 4

26PCCFA6D ................................................ 4

26PCCFA6G ................................................ 4

26PCCFG6G ................................................ 4

26PCDFA6D ................................................ 4

26PCDFA6G ................................................ 4

26PCDFG2G ................................................ 5

26PCFFA6G ................................................ 4

26PCFFG6G ................................................ 4

26PCFFU5G ................................................ 5

26PCGFA6D ................................................ 4

2SS52M ................................................... 44

2SS52M-S ................................................ 44

311SX2-T ................................................. 59

311SX3-T ................................................. 59

311SX5-T ................................................. 59

40PC001B1A.............................................. 8

40PC006G1A .............................................. 8

40PC015G1A .............................................. 8

40PC015V1A .............................................. 8

40PC030G1A .............................................. 8

40PC100G1A .............................................. 8

40PC150G1A .............................................. 8

40PC250G1A .............................................. 8

40PC500G1A .............................................. 8

6SX7-T ..................................................... 59

ASDX001D44R ........................................... 8

ASDX001G24R ........................................... 8

ASDX005D44R ........................................... 8

ASDX005G24R ........................................... 8

ASDX015A24R ........................................... 8

ASDX015D44R ........................................... 8

ASDX015G24R ........................................... 8

ASDX030A24R ........................................... 8

ASDX030D44R .......................................... 8

ASDX030G24R ........................................... 8

ASDX100A24R ........................................... 8

ASDX100D44R ........................................... 8

ASDX100G24R .......................................... 8

AWM2100V .............................................. 10

AWM2200V .............................................. 10

AWM2300V .............................................. 10

AWM3100V .............................................. 10

AWM3200V .............................................. 10

AWM3300V .............................................. 10

AWM42150VH .......................................... 10

AWM42300V ............................................ 10

AWM43300V ............................................ 10

AWM43600V ............................................ 10

AWM5101VN ............................................ 11

AWM5102VN ............................................ 11

AWM5104VC ............................................ 11

AWM5104VN ............................................ 11

AWM720P1 .............................................. 11

AWM92100V ............................................ 12

AWM92200V ............................................ 12

BA-2RB-A2 ............................................... 57

BA-2RQ1-A2 ............................................. 57

BA-2RV-A2 ............................................... 58

BE-2R-A4 .................................................57

BZ-2R-A2 .................................................57

BZ-2RD-A2 ............................................... 57

BZ-2RDS-A2 .............................................57

BZ-2RDS-A2S .......................................... 57

BZ-2RQ181-A2 .........................................58

BZ-2RQ18-A2 ........................................... 57

BZ-2RQ1-A2 .............................................57

BZ-2RW80-A2 .......................................... 58

BZ-2RW822 .............................................. 58

BZ-2RW8225551-A2 ................................58

BZ-2RW822-A2 ........................................58

BZ-2RW826-A2 ........................................58

BZ-2RW82-A2 .......................................... 58

BZ-2RW84-A2 .......................................... 58

BZ-2RW863-A2 ........................................58

BZ-R .........................................................57

BZ-R169 ................................................... 57

BZ-R-A2 ................................................... 57

CPCL04DFC ................................................ 5

CPCL04GFC ................................................ 5

CPCL10DF .................................................. 5

CPCL10DFC ................................................ 5

3100 Silcone Wire-wound...................... 37

3200 Silicone Chemically-etched............37

3400 Kapton or High Temperature .......... 38

78000 Transparent.................................. 38

HEL-700-T-0-A .........................................16

HEL-700-T-0-B .........................................16

68

www.honeywell.com/sensing

INDEX

HEL-700-T-1-A .........................................16

HEL-700-T-1-B .........................................16

HEL-700-U-0-A .........................................16

HEL-700-U-0-B .........................................16

HEL-700-U-0-C .........................................16

HEL-700-U-1-A .........................................16

HEL-700-U-1-B .........................................16

HEL-700-U-1-C .........................................16

HEL-705-T-0-12-00 .................................. 17

HEL-705-T-1-12-00 .................................. 17

HEL-705-U-0-12-00 .................................. 17

HEL-705-U-1-12-00 .................................. 17

HEL-707-T-0-12-00 .................................. 17

HEL-707-T-1-12-00 .................................. 17

HEL-707-U-0-12-00 .................................. 17

HEL-707-U-1-12-00 .................................. 17

HEL-711-T-0-12-00 .................................. 17

HEL-711-T-1-12-00 .................................. 17

HEL-711-U-0-12-00 .................................. 17

HEL-711-U-1-12-00 .................................. 17

HEL-712-T-0-12-00 .................................. 17

HEL-712-T-1-12-00 .................................. 17

HEL-712-U-0-12-00 .................................. 17

HEL-712-U-1-12-00 .................................. 17

HEL-716-T-0-12-00 .................................. 17

HEL-716-T-1-12-00 .................................. 17

HEL-716-U-0-12-00 .................................. 17

HEL-716-U-1-12-00 .................................. 17

HEL-716-U-1-12-C2 .................................17

HEL-717-T-0-12-00 .................................. 17

HEL-717-T-1-12-00 .................................. 17

HEL-717-U-0-12-00 .................................. 17

HEL-717-U-1-12-00 .................................. 17

HIH-3602-A .............................................. 15

HIH-3602-C .............................................. 15

HIH-3602-L ............................................... 15

HIH-3610-001 ........................................... 15

HIH-3610-002 ........................................... 15

HIH-3610-003 ........................................... 15

HIH-3610-004 ........................................... 15

HLC1395-002 ........................................... 49

HLC2705-001 ........................................... 48

HOA0149-001 ........................................... 49

HOA0866-T55 ........................................... 50

HOA0870-N51 .......................................... 50

HOA0880-P51 .......................................... 50

HOA0890-L55 ........................................... 50

HOA0901-011 ........................................... 48

HOA0902-011 ........................................... 48

HOA0961-N51 .......................................... 51

HOA0971-N51 .......................................... 51

HOA1180-002 ........................................... 49

HOA1397-002 ........................................... 49

HOA1405-002 ........................................... 49

HOA1870-031 ........................................... 50

HOA1877-001 ........................................... 50

HOA1879-015 ........................................... 50

HOA1882-012 ........................................... 50

HOA2498-002 ........................................... 49

HOA6963-N51 .......................................... 51

HOA6972-N55 .......................................... 51

HOA6981-L51 ........................................... 51

HOA6990-T51 ........................................... 51

HOA7720-M22 .......................................... 51

HOA7730-M22 ..........................................51

ICL1010002-01 ........................................23

ICL1010004-01 ........................................23

ICL1210005-01 ........................................23

ICL1220002-01 ........................................23

ICL122R508-01 ....................................... 23

ICL1240002-01 ....................................... 23

ICL1250002-01 ....................................... 23

ICL1510006-01 ....................................... 23

ICL1512004-01 ....................................... 23

ICL1516004-01 ....................................... 23

ICL1522102-01 ....................................... 23

ICL152R508-01 ....................................... 23

ICL155R006-01 ....................................... 23

ICL155R007-01 ....................................... 23

ICL1580003-01 ....................................... 23

ICL2210008-01 ....................................... 23

ICL2212103-01 ....................................... 23

ICL221R020-01 ....................................... 23

ICL222R018-01 ....................................... 23

ICL222R515-01 ....................................... 23

ICL32OR530-01 ....................................... 23

ICL321R030-01 ....................................... 23

LL102101 ................................................ 56

LL103000 ................................................56

LL103101 ................................................56

LL105100 ................................................56

LLE102000 ..............................................56

LLE105000 ..............................................56

RDXXX-001 .............................................41

RDXXX-002 .............................................41

SD1440-003L ..........................................47

SD2440-004 ............................................47

SD3443-003 ............................................47

SD5443-003 ............................................47

SD5600-001 ............................................48

SD5610-001 ............................................48

SD5620-001 ............................................48

SD5630-001 ............................................48

SDP8405-003 ..........................................47

SDP8406-002 ..........................................47

SDP8436-003 ..........................................47

SDP8600-001 ..........................................48

SE1450-003L ..........................................46

SE1470-003L ..........................................46

SE2460-003 ............................................46

SE2470-002 ............................................46

SE3455-004 ............................................46

SE3470-003 ............................................46

SE5455-003 ............................................46

SE5470-004 ............................................46

SEP8505-003 ..........................................46

SEP8506-002 ..........................................46

SEP8705-003 ..........................................46

SEP8736-003 ..........................................46

SMD2440-012 .........................................47

SME2470-021 .........................................46

SR13C-A1 ...............................................44

SR13D-A1 ...............................................44

SR13F-A1 ................................................44

SR13R-A1 ...............................................44

SR16C-J4 ................................................44

SR16C-J6 ................................................. 44

SR16C-N .................................................. 44

SR17C-J6 ................................................. 45

SR17C-J7 ................................................. 45

SS41 ........................................................ 42

SS411A .................................................... 42

SS413A .................................................... 42

SS441A .................................................... 42

SS443A .................................................... 42

SS449A .................................................... 42

SS461A .................................................... 42

SS466A .................................................... 42

SS49 ........................................................ 43

SS495A .................................................... 42

SS495A1 .................................................. 42

SS495A1-S .............................................. 42

SS495A-SP .............................................. 42

SS495B ....................................................43

SS496B ....................................................43

SS511AT .................................................. 43

SS513AT .................................................. 43

SS51T ...................................................... 43

SS541AT .................................................. 43

SS543AT .................................................. 43

SS549AT .................................................. 43

SS561AT .................................................. 43

SS566AT .................................................. 43

SS94A1 ....................................................43

SS94A1F .................................................. 43

SS94A2 ....................................................43

TD4A ........................................................17

TD5A ........................................................17

Temperature - Probes

Air Conditioning.....................................25

Air/Gas ................................................... 26

Earth Return (Ground) ............................25

ES110 Inlet Air ....................................... 24

ES120 Coolant/Oil .................................. 24

Immersion .............................................. 26

Refrigerant.............................................. 25

Surface ................................................... 25

Thermostats - Commercial

2450A Heat Detection .............................29

2450CM Ceramic Manual Reset .............. 28

2450HR Phenolic Automatic Reset .........27

2450R Fully Sealed.................................30

2450R Phenolic Annular Automatic Reset ....30

2450R Phenolic Automatic Reset............27

2450R Phenolic “One-shot” ½ in ........... 29

2450R Protected.....................................30

2450RC Ceramic Automatic Reset .......... 28

2450RCH Ceramic Automatic Reset ........28

2450RCH Ceramic “One-shot” ½ in........29

2455A Heat Detection .............................29

2455R Phenolic Automatic Reset............27

2455R Phenolic “One-shot” ½ in .......... 29

2455R Protected.....................................30

2455RBV Overmolded Automatic Reset .. 29

2455RC Ceramic Automatic Reset .......... 28

2455RC Ceramic “One-shot” ½ in .........29

2455RM Phenolic Manual Reset .............28

Thermostats - Precision

3000 Custom-packaged .......................... 33

3100 Hermetic ........................................31

3100U Hermetic...................................... 31

3100UX Hermetic ................................... 31

69

www.honeywell.com/sensing

INDEX

3106 Hermetic ........................................ 31

3150 Low Silhouette Hermetic................ 32

3150U Low Silhouette Hermetic ............. 32

3150UX Low Silhouette Hermetic ........... 32

3156 Low Silhouette Hermetic................ 32

3156U Low Silhouette Hermetic ............. 32

3450CM Ceramic Manual Reset .............. 35

3450HR Phenolic Automatic Reset ......... 34

3450R Phenolic Automatic Reset............ 34

3450R Phenolic “One-shot” ½ in ........... 36

3450RC Ceramic Automatic Reset .......... 34

3450RC Ceramic “One-shot” ½ in .......... 36

3450RCH Ceramic Automatic Reset ........ 34

3450RCH Ceramic “One-shot” ½ in....... 36

3455R Phenolic Automatic Reset............ 34

3455R Phenolic “One-shot” ½ in .......... 36

3455RBV Overmolded Automatic Reset .. 35

3455RC Ceramic Automatic Reset .......... 34

3455RC Ceramic “One-shot” ½ in .............. 36

3455RM Phenolic Manual Reset ............. 35

3800 Industrial Grade ............................. 32

V5A010CB................................................ 64

V5A010CB4E............................................ 64

V5B010CB3 .............................................. 64

V5B010FB3 .............................................. 64

V5B010TB ................................................ 64

V5B210CB................................................ 64

V5B210CB1C ........................................... 64

V5B210CB1E............................................ 64

V5B210CB3D ........................................... 64

V5C010BB................................................ 64

V5C010BB1G ........................................... 64

V5C010BB3B ........................................... 64

V5C010BB3D ........................................... 64

V5C010EB3 .............................................. 64

V5C010TB3 .............................................. 64

V5D030BB ................................................ 64

V5P010CB................................................ 64

V5R030CB ................................................ 64

V5S020CB................................................ 64

V5S030CB................................................ 64

V7-1A17D8 ............................................... 65

V7-1A17D8-022 ....................................... 66

V7-1A17P02 ............................................. 65

V7-1B10E9-207 ........................................ 66

V7-1B17D8 ............................................... 65

V7-1B17D8-048 ....................................... 66

V7-1B17D8-263 ....................................... 66

V7-1B19D8-022 ....................................... 66

V7-1B19E9 ............................................... 65

V7-1C17D8 ............................................... 65

V7-1C17D8-002 ....................................... 65

V7-1C17D8-022 ....................................... 66

V7-1C17D8-048 ....................................... 66

V7-1C17D8-201 ....................................... 66

V7-1C17D8-207 ....................................... 66

V7-1C17D8-263 ....................................... 66

V7-1C17E9 ............................................... 65

V7-1C17E9-002 ........................................ 65

V7-1C17E9-201 ........................................ 66

V7-1C17E9-207 ........................................ 66

V7-1C18E9 ............................................... 65

V7-1C18E9-022 ........................................ 66

V7-1D10D8 ............................................... 65

V7-1E10D8 ............................................... 65

V7-1E17P02 .............................................65

V7-1E19E9 ............................................... 65

V7-1S17D8 ............................................... 65

V7-1S17D8-022 ....................................... 66

V7-1S17D8-201 ....................................... 66

V7-1S17D8-207 ....................................... 66

V7-1S17D8-263 ....................................... 66

V7-1V19E9 ............................................... 65

V7-1V19E9-048 ........................................66

V7-1V19E9-207 ........................................66

V7-1Z19E9 ............................................... 65

V7-2A17D8-022 ....................................... 66

V7-2A17D8-207 ....................................... 66

V7-2A17E9 ............................................... 65

V7-2B17D8 ............................................... 65

V7-2B17D8-022 ....................................... 66

V7-2B17D8-048 ....................................... 66

V7-2B17D8-201 ....................................... 66

V7-2B17D8-207 ....................................... 66

V7-2B17E9 ............................................... 65

V7-2B17E9-002 ........................................65

V7-2B17P02 .............................................65

V7-2B19E9-048 ........................................66

V7-2S17D8 ............................................... 65

V7-2S17D8-022 ....................................... 66

V7-2S17D8-201 ....................................... 66

V7-2S17D8-263 ....................................... 66

V7-3A17D8 ............................................... 65

V7-3E10E8 ............................................... 65

V7-3E10E9 ............................................... 65

V7-3E17D8 ............................................... 65

V7-3E17E9 ............................................... 65

V7-3E17E9-022 ........................................66

V7-3E19E9 ............................................... 65

V7-3S17D8-022 ....................................... 66

V7-3S17D8-048 ....................................... 66

V7-3S17E9 ............................................... 65

V7-3S17E9-022 ........................................66

V7-3S17E9-263 ........................................66

V7-4A17D8 ............................................... 65

V7-4A18E9 ............................................... 65

V7-4S17D8 ............................................... 65

V7-5D17E9 ............................................... 65

V7-6B19D8 ............................................... 65

V7-6C17D8 ............................................... 65

V7-6C17D8-263 ....................................... 66

V7-6C18D8-002 ....................................... 65

V7-6C18D8-048 ....................................... 66

V7-7A19D8 ............................................... 65

V7-7B17D8-201 ....................................... 66

V7-7B19D8-263 ....................................... 66

V7-7D17D8-207 ....................................... 66

V7-9W1AE9-048 ...................................... 66

XCA415AN ................................................. 7

XCX01DNC ................................................. 7

XCX01DNH ................................................. 7

XCX15DNC ................................................. 7

XPC01DFC .................................................. 7

XPC15DTC ................................................. 7

XSXL04GF .................................................. 7

ZM10B10A01 ........................................... 60

ZM50E10A01 ............................................60

ZM50E10D01 ............................................60

ZM50E10E01 ............................................60

ZM50E70A01 ............................................60

ZM50E70D01 ............................................60

ZM50E70E01 ............................................60

ZM90G20A01 ...........................................60

ZV10B70A01 ............................................61

ZV50E10A01 ............................................61

ZV50E10B01 ............................................62

ZV50E20A01 ............................................61

ZV50E20F01 .............................................62

ZV50E70C01 ............................................62

ZV50E70F01 .............................................62

ZW10E15CD1 ...........................................62

ZW10E90FW1 ...........................................63

ZW50F15AD1 ...........................................62

ZX10C10A01 ............................................61

ZX40E10C01 ............................................61

ZX40E10E01 .............................................61

ZX40E30A01 ............................................61

ZX40E30C01 ............................................61

ZX40E30E01 .............................................61

70

www.honeywell.com/sensing

Inside back

cover - blank

Warranty/Remedy

Sales and Service

Honeywell warrants goods of its manufacture as being free of defective

material and faulty workmanship. Contact your local sales office for warranty

information. If warranted goods are returned to Honeywell during that period

of coverage, Honeywell will repair or replace without charge those items it

finds defective. The foregoing is Buyer’s sole remedy and is in lieu of

all other warranties, expressed or implied, including those of

merchantability and fitness for a particular purpose.

While we provide application assistance, personally, through our literature

and the Honeywell web site, it is up to the customer to determine the suitability

of the product in the application.

Honeywell serves its customers through a worldwide network of sales

offices, representatives and distributors. For application assistance,

current specifications, pricing or name of the nearest Authorised

Distributor, contact your local sales office or:

INTERNET: www.honeywell.com/sensing

E-mail: info.sc@honeywell.com

Specifications may change at any time without notice. The information

we supply is believed to be accurate and reliable as of this printing. However,

we assume no responsibility for its use.

Spain

Honeywell S.A.

Phone: +(34) 91 313 6100

FAX: +(34) 91 313 6129

South Korea

Italy

ASIA PACIFIC

EUROPE

LATIN AMERICA

Honeywell Korea Co Ltd

Phone: +(822) 799-6167

Fax: +(822) 792-9013

Honeywell S.p.A.

Phone: +(39) 02 92146 450/

456

Control Products

Austria

Honeywell Latin

Asia Pacific Headquarters

Phone: +(65) 6355-2828

Fax: +(65) 6445-3033

Honeywell Austria GmbH

Phone: +(43) 1 727 80 366/

246

America Headquarters

Phone: 1-305-805-8188

FAX: 1-305-883-8257

FAX: +(39) 02 92146 490

Sweden

Honeywell AB

Phone: +(46) 8 775 55 00

FAX: +(46) 8 775 56 00

Malaysia

Honeywell Engineering Sdn

Bhd

Phone: +(60-3) 7958-4988

Fax: +(60-3) 7958-8922

The Netherlands

Honeywell B.V.

Phone: +(31) 20 565 69 11

FAX: +(31) 20 565 66 00

FAX: +(43) 1 727 80 337

Australia

Honeywell Limited

Phone: +(61) 2-9370-4500

FAX: +(61) 2-9370-4525

Toll Free 1300-36-39-36

Toll Free Fax: 1300-36-04-70

Argentina

Honeywell S.A.I.C.

Phone: +(54-11) 4383-3637

FAX: +(54-11) 4325-6470

Belgium

Honeywell SA/NV

Phone: +(32) 2 728 2522

FAX: +(32) 2 728 2502

Switzerland

Honeywell AG

Phone: +(41) 1 855 24 40

FAX: +(41) 1 855 24 45

New Zealand

Honeywell Limited

Phone: +(64-9) 623-5050

Fax: +(64-9) 623-5060

Toll Free (0800) 202-088

Norway

Honeywell A/S

Phone: +(47) 66 76 20 00

FAX: +(47) 66 76 20 90

Brazil

Bulgaria

Honeywell EOOD

Phone: +(359) 2 979 00 23

FAX: +(359) 2 979 00 24

Honeywell Do Brasil & Cia

Phone: +(55-11) 4166-1900

FAX: +(55-11) 4166-1901

China – PRC - Beijing

Honeywell China Inc.

Phone: +(86-10) 8458-3280

Fax: +(86-10) 8458-3102

Turkey

Honeywell Turkey A.S.

Phone: +(90) 216 5756620

FAX: +(90) 216 5756637

Poland

Philippines

Honeywell Sp. zo.o

Phone: +(48) 606 09 64

FAX: +(48) 606 09 01

Chile

Honeywell Systems

(Philippines) Inc.

Phone: +(63-2) 636-1661/

1662

Czech Republic

Honeywell Chile, S.A.

Phone: +(56-2) 425-8400

FAX: +(56-2) 425-8410

China – PRC - Shanghai

Honeywell China Inc.

Phone: (86-21) 6237-0237

Fax: (86-21) 6237-1237

Honeywell spol. s.r.o.

Phone: +(420) 242 442 111

FAX: +(420) 242 442 182

Ukraine

Honeywell

Phone: +(380) 44 201 44 74

FAX: +(380) 44 201 44 75

Portugal

Fax: +(63-2) 638-4013

Honeywell Portugal Lda

Phone: +(351 21) 424 50 00

FAX: +(351 21) 424 50 99

Mexico

Denmark

Honeywell A/S

Phone: +(45) 39 55 55 55

FAX: +(45) 39 55 55 58

Honeywell S.A. de C.V.

Phone: +(52) 55 5081-0200

FAX: +(52) 55 5081-0202

Singapore

China - Hong Kong S.A.R.

Honeywell Ltd.

Phone: +(852) 2953-6412

Fax: +(852) 2953-6767

United Kingdom

Honeywell Control Systems

Ltd

Phone: +(44) 1698 481481

FAX: +(44) 1698 481676

Honeywell South East Asia

Phone: +(65) 6355-2828

Fax: +(65) 6445-3033

Romania

Honeywell Bucharest

Phone: +(40) 21 231 64 37/

38

Puerto Rico, Caribbean

Honeywell Inc.

Phone: +(787) 792-7075

FAX: +(787) 792-0053

Finland

Honeywell OY

Phone: +(358) 9 3480101

FAX: +(358) 9 34801375

Thailand

Honeywell Systems (Thailand)

Ltd.

Phone: +(662) 693-3099

FAX: +(662) 693-3085

Indonesia

FAX: +(40) 21 231 6439

Honeywell Indonesia Pte Ltd.

Phone: +(62) 21-535-8833

FAX: +(62) 21-5367 1008

Mediterranean & African

Distributors

Honeywell SpA

Phone: +(39) 2 921 46 232

FAX: +(39) 2 921 46 233

Commonwealth of

Independent States (CIS)

Z.A.O. Honeywell

Phone: +(7 095) 796 98 36

FAX: +(7 095) 797 99 06

Venezuela

Honeywell C.A.

Phone: +(58-212) 273-0511

FAX: +(58-212) 273-0599

France

Honeywell SA

Phone: +(33) 1 60 19 80 40

FAX: +(33) 1 60 19 81 73

India

Taiwan R.O.C.

TATA Honeywell Ltd.

Phone: +(91) 20 6870 445/

446

Fax: +(91) 20 681 2243/ 687

5992

Honeywell Taiwan Ltd.

Phone: +(886-2) 2245-1000

FAX: +(886-2) 2245-3241

Middle East Headquarters

Honeywell Middle East Ltd.

Phone: +(9712) 443 2119

FAX +(9712) 443 2536

Slovak Republic

Honeywell s.r.o.

Phone: +(421 2) 58 247 403

FAX: +(421 2) 58 247 415

Germany

Honeywell AG

Phone: +(49) 69 8064 444

FAX: +(49) 69 8064 442

Japan

Honeywell Inc

Phone: +(81) 3 5440 1425

Fax: +(81) 3 5440 1368

South Africa (Republic of)

Honeywell Southern Africa

Honeywell S.A. Pty. Ltd

Phone: +(27) 11 695 8000

FAX +(27) 11 805 1504

NORTH AMERICA

Hungary

Honeywell Kft.

Phone: +(361) 451 43 00

FAX: +(361) 451 43 43

USA/Canada

Honeywell

Sensing and Control

Phone: 1-800-537-6945

1-815-235-6847

FAX: 1-815-235-6545

E-mail:

info.sc@honeywell.com

This publication does not constitute a contract between Honeywell and its customers. The contents may be changed at any time without notice. It is

the customer’s responsibility to ensure safe installation and operation of the products. Detailed mounting drawings of all products illustrated are

Sensing and Control

www.honeywell.com/sensing

Newhouse Industrial Estate

Motherwell ML1 5SB

Scotland, UK

100455-EN Issue 2 2/04 UK07 GLO Printed on environmentally friendly paper.


型号：	112-104KAJ-B01
厂家：	Honeywell
描述：	NTC Thermistor, 100000ohm, Through Hole Mount 温度传感电阻器
文件：	总73页 (文件大小：3657K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

112-104KAJ-B01 [HONEYWELL]

相关型号：

112-13:

112-187-760-X

112-201-2

112-202EAJ-B01

112-203-2

112-25

112-251-6

112-253-6

112-2611-Z-F1-F2-F3-F4

112-2612-Z-F1-F2-F3-F4

112-2613-Z-F1-F2-F3-F4

112-2614-Z-F1-F2-F3-F4