HMC332 [HITTITE]
GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 2.0 - 2.8 GHz; 砷化镓MMIC混频器瓦特/集成LO放大器， 2.0 - 2.8 GHz的
| 型号： | HMC332 |
| 厂家： | 
HITTITE MICROWAVE CORPORATION |
| 描述： | GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 2.0 - 2.8 GHz |
| 文件： | 总6页 (文件大小：249K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
HMC332
v00.0901
MICROWAVE CORPORATION
GaAs MMIC MIXER w/ INTEGRATED
LO AMPLIFIER, 2.0 - 2.8 GHz
Typical Applications
The HMC332 is ideal for:
• MMDS
Features
Integrated LO Amplifier w/ Pdiss: < 20 mW
Conversion Loss / Noise Figure: 8.0 dB
Low LO Drive Level: 0 dBm
• PCMCIA
Input IP3: +10 dBm
• WirelessLAN
Single Positive Supply: 3V to 5V
• WCDMA micro-BTS
General Description
Functional Diagram
The HMC332 is a single balanced mixer IC with an
integrated LO amplifier. This converter IC can oper-
ate as an upconverter or downconverter between
2.0 GHz and 2.8 GHz.With the integrated LO ampli-
fier, the mixer requires an LO drive level of only 0
dBm, and requires only 6 mA from a single positive
+3V rail. The mixer has 8 dB of conversion loss, an
input P1dB of 0 dBm, and an input third order inter-
cept point of +10 dBm.
12
Electrical Specifications,TA = +25° C
IF = 100 MHz
LO = 0 dBm & Vdd = +3V
Parameter
Units
Min.
Typ.
Max.
Frequency Range, RF & LO
Frequency Range, IF
Conversion Loss
2.0 - 2.8
GHz
GHz
dB
DC - 1.0
8
8
10
10
Noise Figure (SSB)
LO to RF Isolation
LO to IF Isolation
dB
11
2
20
5
dB
dB
RF to IF Isolation
11
4
17
10
0
dB
IP3 (Input)
dBm
dBm
mA
1 dB Compression (Input)
Supply Current (Idd)
-4
6
* Unless otherwise noted, all measurements performed as downconverter, IF= 100 MHz.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
12 - 148
HMC332
v00.0901
MICROWAVE CORPORATION
GaAs MMIC MIXER w/ INTEGRATED
LO AMPLIFIER, 2.0 - 2.8 GHz
Conversion Gain vs.
Temperature @ LO = 0 dBm
Isolation @ LO = 0 dBm
0
0
+25 C
-40 C
+85 C
-5
-10
-15
-5
-10
-15
-20
-20
RF/IF
LO/RF
LO/IF
-25
-30
1.4 1.6 1.8
2
2.2 2.4 2.6 2.8
FREQUENCY (GHz)
3
3.2 3.4
1.4 1.6 1.8
2
2.2 2.4 2.6 2.8
FREQUENCY (GHz)
3
3.2 3.4
12
Conversion Gain vs. LO Drive
Return Loss @ LO = 0 dBm
0
0
LO = -6 dBm
LO = -4 dBm
LO = -2 dBm
LO = 0 dBm
LO = +2 dBm
LO = +4 dBm
-5
-10
-15
-5
-10
-15
-20
-20
-25
RF
LO
-30
1.4 1.6 1.8
2
2.2 2.4 2.6 2.8
FREQUENCY (GHz)
3
3.2 3.4
0
0.5
1
1.5
2
2.5
3
3.5
4
FREQUENCY (GHz)
Conversion Gain vs. Vdd @ LO = 0 dBm
IF Bandwidth @ LO = 0 dBm
0
0
+2.7V
+3.0V
+3.3V
-5
-10
-15
-20
-5
-10
-15
CONVERSION GAIN
RETURN LOSS
-20
1.4 1.6 1.8
2
2.2 2.4 2.6 2.8
FREQUENCY (GHz)
3
3.2 3.4
0
0.3
0.5
0.8
1
1.3
1.5
FREQUENCY (GHz)
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
12 - 149
HMC332
v00.0901
MICROWAVE CORPORATION
GaAs MMIC MIXER w/ INTEGRATED
LO AMPLIFIER, 2.0 - 2.8 GHz
Upconverter Performance
Input P1dB vs.
Conversion Gain @ LO = 0 dBm
Temperature @ LO = 0 dBm
0
10
8
+25 C
-40 C
6
4
+85 C
-5
-10
-15
-20
2
0
-2
-4
-6
-8
-10
1.7
1.9
2.1
2.3
2.5
2.7
2.9
3.1
3.3
1.9
2
2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9
FREQUENCY (GHz)
12
FREQUENCY (GHz)
Input IP3 vs.
Temperature @ LO = 0 dBm*
Input IP3 vs. LO Drive*
20
20
15
10
5
-2 dBm
0 dBm
+2 dBm
+25 C
-40 C
+85 C
15
10
5
0
0
1.9
2
2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9
FREQUENCY (GHz)
1.9
2
2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9
FREQUENCY (GHz)
Input IP3 vs. Vdd @ LO = 0 dBm*
Input P1dB vs. Vdd @ LO = 0 dBm
20
10
8
+2.7V
+2.7V
+3.0V
+3.3V
+3.0V
+3.3V
6
4
15
10
5
2
0
-2
-4
-6
-8
-10
0
1.9
2
2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9
FREQUENCY (GHz)
1.9
2
2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9
FREQUENCY (GHz)
* Two-tone input power= -10 dBm each tone, 1 MHz spacing.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
12 - 150
HMC332
v00.0901
MICROWAVE CORPORATION
GaAs MMIC MIXER w/ INTEGRATED
LO AMPLIFIER, 2.0 - 2.8 GHz
MxN Spurious @ IF Port
Harmonics of LO
nLO
nLO Spur @ RF Port
mRF
0
1
-11
0
2
8
3
4
LO Freq. (GHz)
1
2
6
3
4
0
1
2
3
4
xx
8
43
48
45
67
67
2
24
20
20
19
14
11
19
18
22
18
21
24
32
44
43
40
38
39
12
31
39
>74
>74
34
32
50
71
2.2
2.4
2.6
2.8
3
7
41
35
64
>74
9
>74
>74
13
18
15
RF = 2.5 GHz @ -10 dBm
LO = 2.4 GHz @ 0 dBm
All values in dBc below IF power level.
LO = 0 dBm
All values in dBc below input LO level @ RF port.
12
Absolute Maximum Ratings
RF / IF Input (Vdd = +3V)
LO Drive (Vdd = +3V)
Vdd
+13 dBm
+13 dBm
5.5V
Continuous Pdiss (Ta = 85 °C)
(derate 2.64 mW/°C above 85 °C)
238 mW
IF DC Current
3 mA
Storage Temperature
Operating Temperature
-65 to +150 °C
-40 to +85 °C
Outline Drawing
NOTES:
1. PACKAGE BODY MATERIAL: LOW STRESS INJECTION MOLDED
PLASTIC SILICA AND SILICON IMPREGNATED.
2. LEADFRAME MATERIAL: COPPER ALLOY
3. LEADFRAME PLATING: Sn/Pb SOLDER
4. DIMENSIONS ARE IN INCHES [MILLIMETERS].
5. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE.
6. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE.
7. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
12 - 151
HMC332
v00.0901
MICROWAVE CORPORATION
GaAs MMIC MIXER w/ INTEGRATED
LO AMPLIFIER, 2.0 - 2.8 GHz
Pin Descriptions
Pin Number
Function
Description
Interface Schematic
Power supply for the LO Amplifier. Two external RF bypass capaci-
tors (10 pF & 10,000 pF) and an external inductor (4.7 nH) are
required.
1
Vdd
2, 5
GND
Ground: Pin must connect to RF ground.
IF Port: This pin is DC coupled. For applications not requiring
operation to DC, this port should be DC blocked externally using
a series capacitor whose value have been chosen to pass the
necessary IF frequency range. For operation to DC, this pin must
not source/sink more than 3mA of current or die non-function and
possible die failure will result.
12
3
IF Port
RF Port: This pin is AC coupled and matched to 50 Ohm from 2.0
- 2.8 GHz.
4
RF Port
LO Port: This pin is AC coupled and matched to 50 Ohm from 2.0
- 2.8 GHz.
6
LO Port
Application Circuit
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
12 - 152
HMC332
v00.0901
MICROWAVE CORPORATION
GaAs MMIC MIXER w/ INTEGRATED
LO AMPLIFIER, 2.0 - 2.8 GHz
Evaluation PCB
12
List of Materials
The circuit board used in the final application should use
RF circuit design techniques. Signal lines should have
50 ohm impedance while the package ground leads
should be connected directly to the ground plane similar
to that shown. A sufficient number of VIA holes should
be used to connect the top and bottom ground planes.
The evaluation circuit board shown is available from Hit-
tite upon request.
Item
J1 - J4
C1
Description
PC Mount SMA RF Connector
10 pF Capacitor, 0603 Pkg.
.01 µF Capacitor, 0603 Pkg.
4.7 nH Inductor, 0805 Pkg.
HMC332 Mixer
C2
L1
U1
PCB*
103927 Evaluation Board
* Circuit Board Material: Rogers 4350
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
12 - 153
相关型号：
©2020 ICPDF网 联系我们和版权申明