HMC1055LP2CE [HITTITE]
Automotive Telematics; 汽车远程信息处理
| 型号： | HMC1055LP2CE |
| 厂家： | 
HITTITE MICROWAVE CORPORATION |
| 描述： | Automotive Telematics |
| 文件： | 总6页 (文件大小：830K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
HMC1055LP2CE
V00.0912
GaAs MMIC SPST
FAILSAFE SWITCH, DC - 4 GHz
Typical Applications
Features
Failsafe Operation - “On” When Unpowered
Wide Vdd Range: 1.2V to 5V
Very Low On State Current: 200 nA
Low Insertion Loss: 0.7 dB
The HMC1055LP2CE is ideal for:
• RFID & Electronic Toll Collection (ETC)
• Tags, Handsets & Portables
• ISM, WLAN, WiMAX & WiBro
• Automotive Telematics
High IP3: +52 dBm
Compact SOT26 SMT Package
• Test Equipment
General Description
Functional Diagram
The HMC1055LP2CE is low-cost SPST Failsafe
switch in 2x2mm,8 lead DFN plastic package for
use in switching application which require low
insertion loss and very low current consumption.
With 0.7 dB typical loss, these devices can control
signals from DC to 4 GHz and are especially suited
for IF and RF applications including RFID, ISM,
automotive and battery powered tags and portables.
RF1 and is reflective open while RF2 is terminated in
50 OHMs when “Off”. The switch requires a minimal
amount of DC current in the “On” state, and offers
compatibility with CMOS and some TTL logic families.
The failsafe topology results in the switch being
normally “On”, i.e. low insertion loss from RF1 to RF2,
when no DC bias is applied.
Electrical Specifications
TA = +25° C, Vdd = +3.3 Vdc, Vctl = 0/+3.3 Vdc (Unless Otherwise Stated), 50 Ohm System
Parameter
Frequency
Min.
Typ.
Max.
Units
DC - 3.0 GHz
DC- 4.0 GHz
0.6
1.8
Insertion Loss
dB
DC - 2.0 GHz
DC - 4.0 GHz
36
28
dB
dB
Isolation
Return Loss
DC - 4.0 GHz
0.5 - 4.0 GHz
25
dB
Input Power for 0.1 dB Compression
Vctl = 0/+3.3V
Vctl = 0/+3.3V
28
dBm
Input Third Order Intercept
(Two-tone Input Power = +15 dBm Each Tone)
0.5 - 4.0 GHz
DC - 4.0 GHz
63
dBm
Switching Characteristics
tRISE, tFALL (10/90% RF)
tON, tOFF (50% CTL to 10/90% RF)
40
50
ns
ns
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
1
HMC1055CLP2CE
V00.0912
GaAs MMIC SPST
FAILSAFE SWITCH, DC - 4 GHz
Isolation Vctl=3V VDD=3V
Insertion Loss Vctl=3V VDD=3V
0
-1
-2
-3
-4
-5
0
-10
-20
-30
-40
-50
+25C
+85C
-40C
+25C
+85C
-40C
-60
-70
0
1
2
3
4
5
0
1
2
3
4
5
FREQUENCY (GHz)
FREQUENCY (GHz)
Return Loss Vctl=3V RF1
Return Loss Vctl=3V RF2
0
0
+25C
+85C
-40C
-5
-5
-10
-15
-20
-25
-30
-35
+25C
+85C
-40C
-10
-15
-20
-25
-30
-35
0
1
2
3
4
5
0
1
2
3
4
5
FREQUENCY (GHz)
FREQUENCY (GHz)
Return Loss Vctl=0V RF1
Return Loss Vctl=0V RF2
0
-2
-4
-6
0
-5
-10
-15
-20
-25
+25C
+85C
-40C
-8
+25C
+85C
-40C
-30
-10
-35
0
1
2
3
4
5
0
1
2
3
4
5
FREQUENCY (GHz)
FREQUENCY (GHz)
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
2
HMC1055LP2CE
v00.0912
GaAs MMIC SPST
FAILSAFE SWITCH, DC - 4 GHz
Input P0.1dB vs. Temperature
Input IP3 vs. Temperature
80
35
30
25
20
15
+25C
+85C
-40C
75
70
65
60
55
50
10
+25C
+85C
-40C
5
0
1
2
3
4
0.5
1
1.5
2
2.5
3
3.5
4
FREQUENCY (GHz)
FREQUENCY (GHz)
Operating Conditions
Vdd & Vctl = 0 Vdc to +3 Vdc; Vctl_max = Vdd + 0.2 Vdc; Idd & Ictl = 0.1 µA, Typical
Conditions
Vdd - Vctl ≥ + 1.2 Vdc
-0.2 Vdc < Vdd - Vctl < +0.4 Vdc
RF1 - RF2
OFF
ON
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
3
HMC1055LP2CE
v00.0912
GaAs MMIC SPST
FAILSAFE SWITCH, DC - 4 GHz
Absolute Maximum Ratings
RF Input Power (Vctl = 0/+3.3V)
+34 dBm
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Supply Voltage (Vdd)
+6.0 Vdc
Control Voltage Range (Vctl)
Channel Temperature
-0.2 to +(Vdd + 0.2) Vdc
150 °C
Continuous Pdiss (T= 85 °C)
(derate 6.67 mW/ °C above 85°C)
0.88 W
Thermal Resistance
Storage Temperature
Operating Temperature
ESD Sensitivity (HBM)
74 °C/W
-65 to +150 °C
-40 to +85 °C
Class 1A
DC blocks are required at ports RF1 and RF2.
Outline Drawing
NOTES:
1. PACKAGE BODY MATERIAL: LOW STRESS INJECTION MOLDED PLASTIC SILICA AND SILICON
IMPREGNATED.
2. LEAD AND GROUND PADDLE MATERIAL: COPPER ALLOY.
3. LEAD AND GROUND PADDLE PLATING: 100% MATTE TIN.
4. DIMENSIONS ARE IN INCHES [MILLIMETERS].
5. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
6. CHARACTERS TO BE HELVETICA MEDIUM, .016 HIGH, OR LASER MARK LOCATED APPROX. AS
SHOWN.
7. PAD BURR LENGTH SHALL BE 0.15mm MAX. PAD BURR HEIGHT SHALL BE 0.05mm MAX.
8. PACKAGE WARP SHALL NOT EXCEED 0.05mm
9. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND.
10. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED PCB LAND PATTE
Package Information
Part Number
Package Body Material
Lead Finish
MSL Rating
MSL1 [1]
Package Marking
1055
HMC1055
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
[[1] Max peak reflow temperature of 260 °C
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
4
HMC1055LP2CE
v00.0912
GaAs MMIC SPST
FAILSAFE SWITCH, DC - 4 GHz
Pin Descriptions
Pin Number
Function
Description
Interface Schematic
1, 4
N/C
These pins and the exposed ground paddle must be
2, 3
GND
connected to RF ground.
These pins are DC coupled and matched to 50 Ohms.
Blocking capacitors are required.
5,8
RF1,RF2
6
Vdd
Supply Voltage
7
Vctl
See truth and control voltage tables.
Typical Application Circuit
Note:
1. DC Blocking capacitors are required for each RF port as shown. Capacitor value determines lowest frequency of operation.
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
5
Application Support: Phone: 978-250-3343 or apps@hittite.com
HMC1055LP2CE
v00.0912
GaAs MMIC SPST
FAILSAFE SWITCH, DC - 4 GHz
Evaluation PCB
List of Materials for Evaluation
EVAL01-HMC1055LP2C
The circuit board used in the final application
should be generated with proper RF circuit design
techniques. Signal lines at the RF port should
have 50 Ohm impedance and the package ground
leads should be connected directly to the ground
plane similar to that shown above. The evalua-
tion circuit board shown above is available from
Hittite Microwave Corporation upon request.
Item
Description
J1 - J2
J3 - J4
C1
PCB Mount SMA RF Connector
DC Pin
1,000 pF Capacitor, 0402 Pkg.
330 pF capacitor, 0402 Pkg.
HMC1055LP2CE SPST Switch
600-00215-00 Evaluation PCB
C2 - C3
U1
[2]
PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
6
相关型号：
HMC1060LP3ETR
Analog Circuit, 1 Func, BICMOS, PQCC16, 3 X 3 MM, ROHS COMPLIANT, PLASTIC, QFN-16
HITTITE
©2020 ICPDF网 联系我们和版权申明