487LP5E [HITTITE]
SURFACE MOUNT PHEMT 2 WATT POWER AMPLIFIER, 9 - 12 GHz; 表面贴装PHEMT 2瓦功率的功放， 9 - 12 GHz的
| 型号： | 487LP5E |
| 厂家： | 
HITTITE MICROWAVE CORPORATION |
| 描述： | SURFACE MOUNT PHEMT 2 WATT POWER AMPLIFIER, 9 - 12 GHz |
| 文件： | 总6页 (文件大小：242K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
HMC487LP5 / 487LP5E
v01.0705
SURFACE MOUNT PHEMT 2 WATT POWER
AMPLIFIER, 9 - 12 GHz
Typical Applications
Features
The HMC487LP5 / HMC487LP5E is ideal for use as a
power amplifier for:
Saturated Power: +33 dBm @ 20% PAE
Output IP3: +36 dBm
• Point-to-Point Radios
• Point-to-Multi-Point Radios
• Test Equipment and Sensors
• Military End-Use
Gain: 20 dB
+7V @ 1300 mA Supply
50 Ohm Matched Input/Output
25 mm2 Leadless SMT Package
11
Functional Diagram
General Description
The HMC487LP5 & HMC487LP5E are high dynamic
range GaAs PHEMT MMIC 2 Watt Power Amplifiers
housed in leadless 5 x 5 mm surface mount packages.
Operating from 9 to 12 GHz, the amplifier provides
20 dB of gain, +33 dBm of saturated power and 20%
PAE from a +7V supply voltage. Output IP3 is +36 dBm
typical. The RF I/Os are DC blocked and matched
to 50 Ohms for ease of use. The HMC487LP5(E)
eliminate the need for wire bonding, allowing use of
surface mount manufacturing techniques.
Electrical Specifications, TA = +25° C, Vdd1, 2, 3, 4, 5 = +7V, Idd = 1300 mA*
Parameter
Min.
Typ.
9 - 11
20
Max.
Min.
Typ.
11 - 12
22
Max.
0.07
Units
GHz
dB
Frequency Range
Gain
17
19
Gain Variation Over Temperature
Input Return Loss
0.05
7
0.07
0.05
15
dB/ °C
dB
Output Return Loss
7
15
dB
Output Power for 1 dB Compression (P1dB)
Saturated Output Power (Psat)
Output Third Order Intercept (IP3)
Noise Figure
29
32
28
31
dBm
dBm
dBm
dB
33
32
36
35
9
8
Supply Current (Idd)(Vdd = +7V, Vgg = -0.3V Typ.)
1300
1300
mA
* Adjust Vgg between -2 to 0V to achieve Idd = 1300 mA typical.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
11 - 270
HMC487LP5 / 487LP5E
v01.0705
SURFACE MOUNT PHEMT 2 WATT POWER
AMPLIFIER, 9 - 12 GHz
Broadband Gain and Return Loss
Gain vs. Temperature
25
15
5
30
25
20
S21
S11
S22
15
-5
+25 C
+85 C
-40 C
10
5
11
-15
-25
0
6
7
8
9
10
11
12
13
14
15
13
13
8
9
10
11
12
13
13
13
FREQUENCY (GHz)
FREQUENCY (GHz)
Input Return Loss vs. Temperature
Output Return Loss vs. Temperature
0
0
-5
-5
-10
-10
-15
+25 C
+85 C
-40 C
-15
-20
+25 C
+85 C
-40 C
-20
-25
8
9
10
11
12
8
9
10
11
12
FREQUENCY (GHz)
FREQUENCY (GHz)
P1dB vs. Temperature
Psat vs. Temperature
36
36
34
32
30
28
26
24
34
32
30
28
26
24
+25 C
+85 C
-40 C
+25 C
+85 C
-40 C
8
9
10
11
12
8
9
10
11
12
FREQUENCY (GHz)
FREQUENCY (GHz)
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
11 - 271
HMC487LP5 / 487LP5E
v01.0705
SURFACE MOUNT PHEMT 2 WATT POWER
AMPLIFIER, 9 - 12 GHz
Output IP3 vs.Temperature
Power Compression @ 10.5 GHz
42
38
34
30
26
36
30
24
18
22
Pout
+25 C
12
Gain
+85 C
11
PAE
-40 C
18
6
14
10
0
8
9
10
11
12
13
-10
-6
-2
2
6
10
14
18
FREQUENCY (GHz)
INPUT POWER (dBm)
Gain Power and OIP3
Gain, Power and OIP3
vs. Supply Voltage @10.5 GHz
vs. Supply Current @ 10.5 GHz
40
42
38
36
34
32
30
38
34
30
28
Gain
Gain
P1dB
26
24
P1dB
Psat
IP3
26
Psat
IP3
22
20
18
22
18
6.5
7
7.5
800
900
1000
1100
1200
1300
Vdd Supply Voltage (Vdc)
Idd Supply Current (mA)
Noise Figure vs.Temperature
Reverse Isolation vs.Temperature
15
0
-10
-20
12
9
-30
+25 C
+85 C
-40 C
-40
6
-50
-60
-70
+25 C
+85 C
-40 C
3
0
8
9
10
11
12
13
8
9
10
11
12
13
FREQUENCY (GHz)
FREQUENCY (GHz)
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
11 - 272
HMC487LP5 / 487LP5E
v01.0705
SURFACE MOUNT PHEMT 2 WATT POWER
AMPLIFIER, 9 - 12 GHz
Typical Supply Current vs. Vdd
Power Dissipation*
11
Vdd (Vdc)
Idd (mA)
+6.5
1330
Max Pdiss @ +85C
10
9
+7.0
1300
+7.5
1285
Note: Amplifier will operate over full voltage ranges shown
above. Vgg adjusted to achieve Idd= 1300 mA at +7.0V.
8
11 GHz
7
Absolute Maximum Ratings
11
Drain Bias Voltage (Vdd1, 2, 3, 4, 5)
+8 Vdc
6
Gate Bias Voltage (Vgg)
-2.0 to 0 Vdc
5
RF Input Power (RFIN)(Vdd = +7.0 Vdc) +20 dBm
-10 -8 -6 -4 -2
0
2
4
6
8
10 12 14 16
Channel Temperature
150 °C
10 W
INPUT POWER (dBm)
Continuous Pdiss (T= 85 °C)
(derate 154 mW/°C above 85 °C)
* Refer to “Thermal Management for Surface Mount
Components” application note herein.
Thermal Resistance
(channel to ground paddle)
6.5 °C/W
Storage Temperature
Operating Temperature
-65 to +150 °C
-40 to +85 °C
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Outline Drawing
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE
SOLDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED
LAND PATTERN.
Package Information
Part Number
Package Body Material
Lead Finish
MSL Rating
MSL1 [1]
Package Marking [3]
H487
XXXX
HMC487LP5
Low Stress Injection Molded Plastic
Sn/Pb Solder
H487
XXXX
MSL1 [2]
HMC487LP5E
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
11 - 273
HMC487LP5 / 487LP5E
v01.0705
SURFACE MOUNT PHEMT 2 WATT POWER
AMPLIFIER, 9 - 12 GHz
Pin Descriptions
Pin Number
Function
Description
Interface Schematic
1 - 3, 5 - 8, 10 - 12,
14, 15, 17 - 20, 22 -
24, 26, 27, 29 - 31
No connection required. These pins may be connected to
RF/DC ground without affecting performance.
N/C
This pin is AC coupled and
matched to 50 Ohms.
4
RFIN
11
Gate control for amplifier. Adjust to achieve Idd of 1300 mA.
Please follow “MMIC Amplifier Biasing Procedure”
Application Note. External bypass capacitors of 100 pF and
2.2 μF are required.
9
Vgg
This pin is AC coupled and
matched to 50 Ohms.
21
RFOUT
Vdd1, Vdd2,
Vdd3, Vdd4,
Vdd5
Power Supply Voltage for the amplifier. External bypass
capacitors of 100 pF and 2.2 μF are required.
32, 28, 25,
13, 16
Ground: Backside of package has exposed metal ground
slug that must be connected to ground through a short path.
Vias under the device are required
GND
Application Circuit
Component Value
C1
C2
100 pF
2.2 μF
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
11 - 274
HMC487LP5 / 487LP5E
v01.0705
SURFACE MOUNT PHEMT 2 WATT POWER
AMPLIFIER, 9 - 12 GHz
Evaluation PCB
11
List of Materials for Evaluation PCB 108190 [1]
The circuit board used in this application should use
RF circuit design techniques. Signal lines should
have 50 ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown.
A sufficient number of via holes should be used to
connect the top and bottom ground planes. Copper
filled vias under the device are recommended. The
evaluation board should be mounted to an appro-
priate heat sink. The evaluation circuit board shown
is available from Hittite upon request.
Item
Description
SRI PC Mount SMA Connector
2mm DC Header
J1, J2
J3, J4
C1 - C6
C7 - C12
U1
100 pF capacitor, 0402 pkg.
2.2μF Capacitor, Tantalum
HMC487LP5 / HMC487LP5E Amplifier
108188 Evaluation PCB
[2]
PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
11 - 275
相关型号：
488-3312-500
Board Connector, 72 Contact(s), 6 Row(s), Straight, 0.079 inch Pitch, Press Fit Terminal, Locking
AMPHENOL
488-3412-250
Board Connector, 72 Contact(s), 6 Row(s), Straight, 0.079 inch Pitch, Press Fit Terminal, Locking
AMPHENOL
488-3412-350
Board Connector, 72 Contact(s), 6 Row(s), Straight, 0.079 inch Pitch, Press Fit Terminal, Locking
AMPHENOL
488-3412-400
Board Connector, 72 Contact(s), 6 Row(s), Straight, 0.079 inch Pitch, Press Fit Terminal, Locking
AMPHENOL
488-3412-500
Board Connector, 72 Contact(s), 6 Row(s), Straight, 0.079 inch Pitch, Press Fit Terminal, Locking
AMPHENOL
488-3412-600
Board Connector, 72 Contact(s), 6 Row(s), Straight, 0.079 inch Pitch, Press Fit Terminal, Locking
AMPHENOL
488-3424-250
Board Connector, 144 Contact(s), 6 Row(s), Straight, 0.079 inch Pitch, Press Fit Terminal, Locking
AMPHENOL
488-3424-300
Board Connector, 144 Contact(s), 6 Row(s), Straight, 0.079 inch Pitch, Press Fit Terminal, Locking
AMPHENOL
488-3424-350
Board Connector, 144 Contact(s), 6 Row(s), Straight, 0.079 inch Pitch, Press Fit Terminal, Locking
AMPHENOL
©2020 ICPDF网 联系我们和版权申明