首页 |元器件品牌

FH19C-50S-0.5SH [HRS]

0.5 mm Pitch, 0.9 mm Height, FPC/FFC Connectors;
FH19C-50S-0.5SH
型号： FH19C-50S-0.5SH
厂家： HRS    HRS
描述：

0.5 mm Pitch, 0.9 mm Height, FPC/FFC Connectors

PC
文件： 总12页 (文件大小：348K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
0.5 mm Pitch, 0.9 mm Height, FPC/FFC Connectors  
FH19C Series/FH19SC Series  
FH19C – FPC/FFC thickness: 0.2 0.03mm  
Actuator color: Brown  
FH19SC – FPC/FFC thickness: 0.3 0.03mm  
Actuator color: Black  
●
0.9mm high (30 pos. shown)  
■Features  
1. Low-profile 0.5mm pitch FPC/FFC Connectors  
Miniaturization of portable equipment and personal  
mobile devices has created increased demand for a low  
profile, high density, and high reliability connectors.  
*The design of this connector has been made thinner and  
smaller, with a height of 0.9mm and width of 3mm.  
*PCB footprint: Reduced approximately 48% (as compared  
with Hirose Electric's 0.5mm pitch FH12 Series  
connectors)  
0.9mm  
● Can be mounted over conductive traces  
*Connector weight: Reduced approximately 78% (as compared  
with Hirose Electric's 0.5mm pitch FH12 Series connectors)  
2. Conductive traces on the PCB can run under  
the connector  
All bottom surface of the connector is solid, without any  
exposure of the contact.  
3. Proven Flip-Lock Actuator System assures  
easy and reliable operation  
Enclosed construction  
(No exposed contacts)  
Metal fittings  
Rotating actuator permits easy insertion and reliable  
connection with the FPC & FFC.  
(Leadless)  
Tactile sensation confirms complete mechanical locking of  
the actuator and the electrical connection.  
● Metal Fittings (Leadless Type)  
4. Accepts 0.2mm & 0.3mm thick FPC/FFC  
No exposed contacts on the bottom of the connector.  
The connector will also terminate with 0.2mm thick Flat  
Flexible Cable (FFC).  
No protrusions on  
the sides allows  
close side-by-side  
board placement.  
5. Board placement with automatic equipment  
Flat upper surface and tape and reel packaging facilitate  
vacuum pick-up and placement. Standard reel packaging  
contains 5000 connectors.  
● Actuator Temporary Hold Mechanism  
6. Wide range of contact counts  
The contact positions available range from 4 to 50.  
7. Satisfies Halogen-free requirements  
All materials and substances used in this product comply  
with the Halogen-free standards.  
* Defined according to IEC61249-2-21  
Br: 900ppm max, Cl: 900ppm max, Br+Cl: 1,500ppm max  
Actuator stays open during insertion of the FPC/FFC.  
1
2013.11w  
FH19C & FH19SC Series●0.5mm pitch, 0.9mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors  
■Product Specifications  
Operating temperature range  
Storage temperature range  
(
)
Note1  
Current rating 0.5 A  
+
+
-55ç to 85ç (Note 2)  
-10ç to 50ç (Note 3)  
Rating  
Operating humidity range  
Relative humidity 90% max. (No condensation)  
Storage humidity range  
Relative humidity 90% max. (No condensation)  
Voltage rating 50 V AC  
Thickness: = 0.2 0.03mm Gold plated  
Thickness: = 0.3 0.03mm Gold plated  
Recommended  
FPC, FFC  
FH19C Series  
FH19SC Series  
Item  
Specification  
Conditions  
1. Insulation resistance 500 M ohms min.  
100 V DC  
2. Withstanding voltage No flashover or insulation breakdown  
150 V AC/1 minute  
100 m ohms max.  
*Including FPC/FFC conductor resistance  
3. Contact resistance  
1 mA  
4. Durability  
Contact resistance: 100 m ohms max.  
20 cycles  
(insertion/ withdrawal) No damage, cracks, or parts dislocation.  
No electrical discontinuity of 1 μs or more.  
Contact resistance: 100 m ohms max.  
No damage, cracks, or parts dislocation.  
Frequency: 10 to 55 Hz, single amplitude of  
0.75mm, 10 cycles in each of the 3 directions  
5. Vibration  
6. Shock  
No electrical discontinuity of 1 μs. min.  
Contact resistance: 100 m ohms max.  
No damage, cracks, or parts dislocation.  
Acceleration of 981 m/s2, 6 ms duration, sine half-  
wave waveform, 3 cycles in each of the 3 axis.  
Contact resistance: 100 m ohms max.  
Insulation resistance: 100 M ohms min.  
No damage, cracks, or parts dislocation.  
96 hours at temperature of 40ç and humidity of  
90 to 95%  
7. Humidity  
(Steady state)  
+
+
+
+
+ +  
15ç to 35ç  
2 to 3(Minutes)  
Temperature: -55ç  
15ç to 35ç  
85ç  
30  
Contact resistance: 100 m ohms max.  
Insulation resistance: 100 M ohms min.  
No damage, cracks, or parts dislocation.  
/
/
/
/
/
/
Time  
: -30  
2 to 3  
8. Temperature cycle  
5 cycles  
9. Resistance to  
soldering heat  
Reflow: At the recommended temperature profile  
Manual soldering: 350ç 5ç for 5 seconds  
No deformation of components affecting performance.  
Note 1: When passing the current through all of the contacts, use 70% of the current rating.  
Note 2: Includes temperature rise caused by current flow.  
Note 3: The term “storage” refers to products stored for long period of time prior to mounting and use. Operating Temperature  
Range and Humidity range covers non- conducting condition of installed connectors in storage, shipment or during  
transportation.Information  
■Materials  
Part  
Material  
LCP  
Finish  
Remarks  
UL94V-0  
Color: Beige  
Color: Brown (FH19C Series)  
Color: Black (FH19SC Series)  
Gold plated  
Insulator  
Contacts  
Metal fittings  
Phosphor bronze  
Phosphor bronze  
-------  
-------  
Pure tin reflow plated  
■Ordering information  
FH 19 C - 30S - 0.5 SH (05)  
1
2
3
4
5
6
7
1 Series name :  
2 Series No. :  
FH  
19  
5 Contact pitch : 0.5mm  
Terminal type  
6
SH: SMT horizontal mounting type  
C
:
FPC thickness : 0.2mm  
FPC/FFC thickness : 0.3mm  
3
SC :  
Material and plating specifications :  
7
FH19C : (10)...Gold plating with nickel barrier 5,000pieces/reel  
(99)...Gold plating with nickel barrier 500pieces/reel  
4 No. of contacts : 4 to 50  
FH19SC : (09)...Gold plating with nickel barrier 5,000pieces/reel  
(99)...Gold plating with nickel barrier 500pieces/reel  
2
FH19C & FH19SC Series●0.5mm pitch, 0.9mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors  
■Connector Dimension  
[
FH19C Series]  
A
0.15  
B
G
∞Number of contacts  
0.15  
0.5  
(0.15)  
G
A
(130°)  
Polarizing mark indicator  
Number of contacts indicator  
(0.15)  
(C: FPC insertion slot dimension)  
0.1  
2
0.15MAX  
2.15 0.2  
1
1
2
0.15MAX  
S
D
(1.3)  
Notes  
1
2
3
4
5
6
The coplanarity of each terminal lead and metal fitting is within 0.1mm.  
The contact terminal lead position indicates the dimension from the bottom surface of the insulator body.  
Difference between terminal contact to be max. 0.1mm.  
Packaged on tape and reel only. Check packaging specification.  
Any discoloration of the plastic compound will NOT AFFECT form, fit or function of the connector.  
After reflow, the terminal plating may change color, however this does not represent a quality issue.  
Unit: mm  
D
Part Number  
CL No.  
Number of Contacts  
A
4
B
1.5  
2
C
FH19C-04S-0.5SH(**)  
FH19C-05S-0.5SH(**)  
FH19C-06S-0.5SH(**)  
FH19C-07S-0.5SH(**)  
FH19C-08S-0.5SH(**)  
FH19C-09S-0.5SH(**)  
FH19C-10S-0.5SH(**)  
FH19C-12S-0.5SH(**)  
FH19C-13S-0.5SH(**)  
FH19C-15S-0.5SH(**)  
FH19C-17S-0.5SH(**)  
FH19C-20S-0.5SH(**)  
FH19C-21S-0.5SH(**)  
FH19C-24S-0.5SH(**)  
FH19C-27S-0.5SH(**)  
FH19C-30S-0.5SH(**)  
FH19C-34S-0.5SH(**)  
FH19C-40S-0.5SH(**)  
FH19C-50S-0.5SH(**)  
580-0410-1-**  
580-0418-3-**  
580-0409-2-**  
580-0411-4-**  
580-0404-9-**  
580-0403-6-**  
580-0412-7-**  
580-0413-0-**  
580-0405-1-**  
580-0406-4-**  
580-0408-0-**  
580-0402-3-**  
580-0414-2-**  
580-0407-7-**  
580-0401-0-**  
580-0400-8-**  
580-0419-6-**  
580-0416-8-**  
580-0417-0-**  
4
2.57  
3.35  
5
4.5  
5
3.07  
3.57  
3.85  
6
2.5  
3
4.35  
7
5.5  
6
4.07  
4.85  
8
3.5  
4
4.57  
5.35  
9
6.5  
7
5.07  
5.85  
10  
12  
13  
15  
17  
20  
21  
24  
27  
30  
34  
40  
50  
4.5  
5.5  
6
5.57  
6.35  
8
6.57  
7.35  
8.5  
9.5  
10.5  
12  
12.5  
14  
15.5  
17  
19  
22  
27  
7.07  
7.85  
7
8.07  
8.85  
8
9.07  
9.85  
9.5  
10  
10.57  
11.07  
12.57  
14.07  
15.57  
17.57  
20.57  
25.57  
11.35  
11.85  
13.35  
14.85  
16.35  
18.35  
21.35  
26.35  
11.5  
13  
14.5  
16.5  
19.5  
24.5  
Note1: Embossed tape reel packaging (5,000 pieces/reel, 500 pieces/reel).  
Order by number of reels.  
3
FH19C & FH19SC Series●0.5mm pitch, 0.9mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors  
[
FH19SC Series]  
A
0.15  
B
G
∞Number of contacts  
0.5  
(0.15)  
0.15  
G
A
5
(130°)  
Polarizing mark indicator  
Number of contacts indicator  
(0.15)  
(C: FPC insertion slot dimension)  
0.1  
2
1
0.15MAX  
2.15 0.2  
0.15MAX  
S
1
2
D
(1.3)  
Notes  
1
2
3
4
5
6
7
The coplanarity of each terminal lead and metal fitting is within 0.1mm.  
The contact terminal lead position indicates the dimension from the bottom surface of the insulator body.  
Difference between terminal contact to be max. 0.1mm.  
Any discoloration of the plastic compound will NOT AFFECT form, fit or function of the connector.  
The contacts are protruding. 0.03mm max. from the housing top surface.  
Packaged on tape and reel only. Check packaging specification.  
After reflow, the terminal plating may change color, however this does not represent a quality issue.  
Unit: mm  
D
Part Number  
CL No.  
Number of Contacts  
A
8
B
5.5  
6
C
FH19SC-12S-0.5SH(**)  
FH19SC-13S-0.5SH(**)  
FH19SC-14S-0.5SH(**)  
FH19SC-15S-0.5SH(**)  
FH19SC-16S-0.5SH(**)  
FH19SC-17S-0.5SH(**)  
FH19SC-18S-0.5SH(**)  
FH19SC-20S-0.5SH(**)  
FH19SC-21S-0.5SH(**)  
FH19SC-22S-0.5SH(**)  
FH19SC-24S-0.5SH(**)  
FH19SC-26S-0.5SH(**)  
FH19SC-27S-0.5SH(**)  
FH19SC-28S-0.5SH(**)  
FH19SC-30S-0.5SH(**)  
FH19SC-32S-0.5SH(**)  
580-0512-1-**  
580-0518-8-**  
580-0509-7-**  
580-0503-0-**  
580-0521-2-**  
580-0504-3-**  
580-0519-0-**  
580-0502-8-**  
580-0505-6-**  
580-0506-9-**  
580-0511-9-**  
580-0510-6-**  
580-0516-2-**  
580-0513-4-**  
580-0500-2-**  
580-0514-7-**  
12  
13  
14  
15  
16  
17  
18  
20  
21  
22  
24  
26  
27  
28  
30  
32  
6.57  
7.35  
8.5  
9
7.07  
7.57  
7.85  
6.5  
7
8.35  
9.5  
10  
8.07  
8.85  
7.5  
8
8.57  
9.35  
10.5  
11  
9.07  
9.85  
8.5  
9.5  
10  
9.57  
10.35  
11.35  
11.85  
12.35  
13.35  
14.35  
14.85  
15.35  
16.35  
17.35  
12  
10.57  
11.07  
11.57  
12.57  
13.57  
14.07  
14.57  
15.57  
16.57  
12.5  
13  
10.5  
11.5  
12.5  
13  
14  
15  
15.5  
16  
13.5  
14.5  
15.5  
17  
18  
Note1: Embossed tape reel packaging (5,000 pieces/reel, 500pieces/reel) .  
Order by number of reels.  
4
FH19C & FH19SC Series●0.5mm pitch, 0.9mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors  
■Recommended PCB Land and Metal Mask Dimensions  
[Common to FH19C & FH19SC Series]  
Recommended metal mask thickness: 0.10 mm.  
B
H
∞Number of contacts  
0.5  
0.3 0.05 (Land)  
0.1 H  
0.25 0.05 (Metal mask)  
(0.05)  
J
0.1  
0.1  
(0.2)  
K
(A)  
■Recommended FPC, FFC Dimensions  
[
Common to FH19C & FH19SC Series]  
L
0.05  
0.03  
0.5 0.07  
B
FH19C Series  
0.2 0.03  
FH19SC Series  
0.3 0.03  
0.35 0.03(FPC)  
0.3 0.03(FFC)  
0.5 0.03  
Note 1: Stiffener dimension should be 3.5mm min., and X dimension should be 0.5mm for improved flexibility of FPC.  
Unit: mm  
Unit: mm  
Number of Contacts  
A
B
J
K
L
Number of Contacts  
A
B
J
K
L
4
5
4.0  
4.5  
5.0  
5.5  
6.0  
6.5  
7.0  
8.0  
8.5  
9.0  
9.5  
10.0  
10.5  
11.0  
1.5  
2.0  
2.5  
3.0  
3.5  
4.0  
4.5  
5.5  
6.0  
6.5  
7.0  
7.5  
8.0  
8.5  
3.1  
3.6  
4.1  
4.6  
5.1  
5.6  
6.1  
7.1  
7.6  
8.1  
8.6  
9.1  
9.6  
10.1  
3.9  
4.4  
4.9  
5.4  
5.9  
6.4  
6.9  
7.9  
8.4  
8.9  
9.4  
9.9  
10.4  
10.9  
2.5  
3.0  
3.5  
4.0  
4.5  
5.0  
5.5  
6.5  
7.0  
7.5  
8.0  
8.5  
9.0  
9.5  
20  
21  
22  
24  
26  
27  
28  
30  
32  
34  
40  
45  
50  
12.0  
12.5  
13.0  
14.0  
15.0  
15.5  
16.0  
17.0  
18.0  
19.0  
22.0  
24.5  
27.0  
9.5  
11.1  
11.6  
12.1  
13.1  
14.1  
14.6  
15.1  
16.1  
17.1  
18.1  
21.1  
23.6  
26.1  
11.9  
12.4  
12.9  
13.9  
14.9  
15.4  
15.9  
16.9  
17.9  
18.9  
21.9  
24.4  
26.9  
10.5  
11.0  
11.5  
12.5  
13.5  
14.0  
14.5  
15.5  
16.5  
17.5  
20.5  
23.0  
25.5  
10.0  
10.5  
11.5  
12.5  
13.0  
13.5  
14.5  
15.5  
16.5  
19.5  
22.0  
24.5  
6
7
8
9
10  
12  
13  
14  
15  
16  
17  
18  
5
FH19C & FH19SC Series●0.5mm pitch, 0.9mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors  
■
FH19C & FH19SC Series FPC/FFC Construction (Recommended Specifications)  
FPC : Flexible Printed Circuit  
1. Using Single-sided FPC  
Thickness (μm)  
FH19C FH19SC  
Material Name  
Material  
Covering layer film  
Cover adhesive  
Polyimide 1 mil thick  
(25)  
(25)  
(25)  
(25)  
Nickel under plated 1 to 5μm /  
Gold plated 0.2μm  
Surface treatment  
3
3
Copper foil  
Base adhesive  
Base film  
Cu  
Thermosetting adhesive  
Polyimide 1 mil thick  
1oz  
35  
25  
25  
30  
35  
25  
25  
30  
Reinforcement material adhesive Thermosetting adhesive  
Polyimide  
FH19C :3mil  
FH19SC:7mil  
75  
175  
Stiffener  
Total  
193  
293  
FPC : Flexible Printed Circuit  
2. Using Double-sided FPC  
Thickness (μm)  
FH19C FH19SC  
Material Name  
Material  
Polyimide 1 mil thick  
(25)  
(25)  
Covering layer film  
Cover adhesive  
(25)  
(25)  
Nickel under plated 1 to 5μm /  
Gold plated 0.2μm  
Surface treatment  
3
3
Through-hole copper  
Copper foil  
Cu  
15  
18  
18  
25  
18  
18  
25  
25  
25  
15  
18  
18  
25  
18  
18  
25  
25  
50  
Cu  
1/2oz  
Base adhesive  
Base film  
Thermosetting adhesive  
Polyimide  
Cu  
1 mil thick  
Base adhesive  
Copper foil  
1/2oz  
Cover adhesive  
Covering layer film  
Reinforcement material adhesive  
Thermosetting adhesive  
Polyimide 1 mil thick  
Thermosetting adhesive  
Polyimide  
FH19C :1mil  
FH19SC:4mil  
25  
100  
Stiffener  
Total  
197  
297  
FFC : Flexible Flat Cable  
3. Using FFC (Flexible Flat Cable)  
Thickness (μm)  
Material Name  
Material  
FH19C FH19SC  
(12)  
(30)  
35  
(12)  
(30)  
35  
Polyester film  
Adhesive  
Polyester thermoplastic type  
(Nickel under plated / Gold plated), soft copper film  
30  
30  
Adhesive  
Polyester  
Adhesive  
Stiffener  
Polyester  
12  
12  
30  
30  
Polyester  
Polyester  
Total  
100  
207  
188  
295  
* Practical tolerance of thickness dimension is 20μm (i.e., 187 to 227μm).  
1. This specification is a recommendation for the construction of the  
FH19C/FH19SC Series FPC and FFC (t=0.2/0.3 0.03).  
2. For details about the construction, please contact the FPC/FFC  
manufacturers.  
4. Precautions  
6
FH19C & FH19SC Series●0.5mm pitch, 0.9mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors  
■Packaging Specifications  
[Common to FH19C & FH19SC Series]  
● Embossed Carrier Tape Dimensions  
(1.7)  
2
0.15  
4
0.1  
8
0.1  
(0.3)  
(3.3)  
(4.3)  
Flat surface for placement  
with automatic equipment  
Unreeling direction  
(1)  
●Reel Dimensions  
(R:INSIDE)  
(T:OUTSIDE)  
End cection  
Mounting cection  
Lead cection (400 mm min.)  
Embossed carrier tape  
Blank cection  
Blank cection  
Top cover tape  
(10 pockets min.)  
(10 pockets min.)  
Unit: mm  
Unit: mm  
Number of Contacts  
M
N
Q
R
T
Number of Contacts  
M
N
Q
R
T
4
5
6
7
8
16  
16  
16  
16  
16  
16  
16  
16  
16  
16  
16  
24  
24  
24  
7.5  
7.5  
7.5  
7.5  
7.5  
7.5  
7.5  
7.5  
7.5  
7.5  
7.5  
11.5  
11.5  
11.5  
4.3  
4.8  
5.3  
5.8  
6.3  
6.8  
7.3  
8.3  
8.8  
9.3  
9.8  
10.3  
10.8  
11.3  
17.4  
17.4  
17.4  
17.4  
17.4  
17.4  
17.4  
17.4  
17.4  
17.4  
17.4  
25.4  
25.4  
25.4  
21.4  
21.4  
21.4  
21.4  
21.4  
21.4  
21.4  
21.4  
21.4  
21.4  
21.4  
29.4  
29.4  
29.4  
20  
21  
22  
24  
26  
27  
28  
30  
32  
34  
40  
45  
50  
24  
24  
24  
24  
24  
24  
24  
24  
32  
32  
44  
44  
44  
11.5  
11.5  
11.5  
11.5  
11.5  
11.5  
11.5  
11.5  
14.2  
14.2  
20.2  
20.2  
20.2  
12.3  
12.8  
13.3  
14.3  
15.3  
15.8  
16.3  
17.3  
18.3  
19.3  
22.3  
24.8  
27.3  
25.4  
25.4  
25.4  
25.4  
25.4  
25.4  
25.4  
25.4  
33.4  
33.4  
45.4  
45.4  
45.4  
29.4  
29.4  
29.4  
29.4  
29.4  
29.4  
29.4  
29.4  
37.4  
37.4  
49.4  
49.4  
49.4  
9
10  
12  
13  
14  
15  
16  
17  
18  
Note: Embossed tape 32 mm or wider will have perforated feed holes on two sides.  
7
FH19C & FH19SC Series●0.5mm pitch, 0.9mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors  
■Recommended Temperature Profile  
[For FH19C & FH19SC Series]  
MAX 250ç  
HRS test condition  
Solder method  
Solder composition :Paste,  
96.5%Sn/3.0%Ag/0.5%Cu  
:Reflow, IR/hot air  
250  
200  
150  
100  
50  
230ç  
200ç  
(Senju Metal Industry, Co.,  
Ltd.’s Part  
Number:M705-221CM5-32-  
10.5)  
150ç  
Test board  
:Glass epoxy  
45mm∞100mm∞1.6mm thick  
Land dimensions  
Metal mask  
:0.3mm∞0.8mm  
:0.25mm∞0.8mm∞0.1mm  
This temperature profile is based on the above  
conditions.  
25ç  
(60 sec.) 90 sec. to 120 sec.  
(60 sec.)  
0
In individual applications the actual temperature may  
vary, depending on solder paste type,  
volume/thickness and board size/thickness. Consult  
tour solder paste and equipment manufacturer for  
specific recommendations.  
Start  
Preheating  
Soldering  
Time (Seconds)  
8
FH19C & FH19SC Series●0.5mm pitch, 0.9mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors  
■Connector Operation and Precautions  
Operation  
Precautions  
1) Do not apply excessive force or use any type  
of tool to operate the actuator.  
1. FPC/FFC Termination procedure.  
Connector installed on the board.  
1) Lift up the actuator. Use thumb or index fin-  
ger.  
2) The connector will assure reliable performance  
when the actuator is open to 130° maximum.  
Do not exceed this angle, as this may cause  
permanent damage to the connector.  
2) Assure that the FPC/FFC is fully inserted  
parallel to mounting surface, with the  
exposed conductive traces facing down.  
FPC conductor surface  
(Bottom side)  
3) Insert the FPC/FFC straight into the insertion open-  
ing. Failing to follow this precaution can lead to  
damaging the FPC/FFC and altering its connectivity.  
3) Rotate down the actuator until firmly closed.  
It is critical that the inserted FPC/FFC is not  
moved and remains fully inserted. Should  
the FPC/FFC be moved, open the actuator  
and repeat the process, starting with Step 1  
above.  
4) When you insert the FPC into the insertion open-  
ing, do not apply excessive pressure or scrape  
the FPC on the bottom of the opening. Doing so  
can lead to deformities of the contacts and can  
hinder the performance of the connector.  
2. FPC/FFC Removal  
1) Lift up the actuator.  
2) Carefully remove the FPC/FFC.  
5) Application of excessive force to the inserted  
FPC/FFC may cause damage to connector  
and may affect the reliability of electrical con-  
nection.  
If specific applica-  
tion requires con-  
tinuous or repeated  
pull or bend of the  
inserted FPC/FFC,  
assure that the  
forces are NOT  
transmitted directly  
to the connector.  
9
FH19C & FH19SC Series●0.5mm pitch, 0.9mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors  
:
NOTES  
10  
FH19C & FH19SC Series●0.5mm pitch, 0.9mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors  
:
NOTES  
11  
FH19C & FH19SC Series●0.5mm pitch, 0.9mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors  
USA:  
USA:  
USA:  
HIROSE ELECTRIC (U.S.A.), INC. Headquarters  
HIROSE ELECTRIC (U.S.A.), INC. North California Office HIROSE ELECTRIC (U.S.A.), INC. Detroit Office (Automotive)  
2688 Westhills Court, Simi Valley, CA 93065-6235 20400 Stevens Creek Blvd., Ste 250, Cupertino, CA 37677 Professional Center Drive, Suite #100C  
Phone : 1-805-522-7958  
Fax : 1-805-522-3217  
http://www.hiroseusa.com  
95014  
Livonia, MI 48154  
Phone : 1-408-253-9640  
Fax : 1-408-253-9641  
http://www.hiroseusa.com  
Phone : 1-734-542-9963  
Fax : 1-734-542-9964  
http://www.hiroseusa.com  
GERMANY:  
THE NETHERLANDS:  
UK:  
HIROSE ELECTRIC EUROPE B.V. GERMAN BRANCH  
Herzog-Carl-Strasse 4 D-73760 Ostfildern  
(Scharnhauser Park)  
Phone : 49-711-4560-02-1  
Fax : 49-711-4560-02-299  
http://www.hirose.de  
HIROSE ELECTRIC EUROPE B.V.  
Hogehillweg #8 1101 CC Amsterdam Z-O  
Phone : 31-20-6557460  
Fax : 31-20-6557469  
http://www.hiroseeurope.com  
HIROSE ELECTRIC EUROPE B.V. UK BRANCH  
First Floor, St Andrews House, Caldecotte Lake  
Business Park, Milton Keynes MK7 8LE  
Phone : 44-1908-369060  
Fax : 44-1908-369078  
http://www.hirose.co.uk  
CHINA:  
CHINA:  
CHINA:  
HIROSE ELECTRIC CO., LTD. BEIJING REPRESENTATIVE OFFICE HIROSE ELECTRIC (SHANGHAI) CO., LTD.  
HIROSE ELECTRIC CO., LTD. SHENZHEN OFFICE  
A1001, Ocean International Center, Building 56# East 4th 1501-02, Cross Tower Building, 318 Fuzhou Road, Room 09-13, 19/F, Office Tower Shun Hing Square, Di Wang Commercial Centre  
Ring Middle Road, Chao Yang District, Beijing, 100025  
Phone : 86-10-5165-9332  
Huang Pu District, Shanghai 200001  
Phone : 86-21-6391-3355  
5002, ShenNanDong Road, ShenZhen City, Guangdong Province, 518008  
Phone : 86-755-8207-0851  
Fax : 86-10-5908-1381  
Fax : 86-21-6335-0767  
Fax : 86-755-8207-0873  
http://www.hirose-china.com.cn  
http://www.hirose-china.com.cn  
http://www.hirose-china.com.cn  
HONG KONG:  
TAIWAN:  
SINGAPORE:  
HIROSE ELECTRIC HONGKONG TRADING CO., LTD.  
Unit 1102 A&B, Energy Plaza, 92 Granville Road, 103 8F, No.87, Zhengzhou Rd., Taipei  
Tsim Sha Tsui East, Kowloon  
Phone : 852-2803-5338  
Fax : 852-2591-6560  
HIROSE ELECTRIC TAIWAN CO., LTD.  
HIROSE ELECTRIC CO., LTD.  
10 Anson Road #26-16 International Plaza 079903  
Phone : 65-6324-6113  
65-6324-6123  
Fax :  
http://www.hirose-singapore.com.sg  
Phone : 886-2-2555-7377  
Fax : 886-2-2555-7350  
http://www.hirose-taiwan.com.tw  
http://www.hirose-hongkong.com.hk  
KOREA:  
HIROSE KOREA CO., LTD.  
1261-10, Jeoungwhang-Dong, Shihung-City,  
Kyunggi-Do 429-450  
Phone : 82-31-496-7000,7124  
Fax : 82-31-496-7100  
http://www.hirose.co.kr  
®
6-3,Nakagawa Chuoh-2-Chome,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN  
TEL: 81-45-620-3526 Fax: 81-45-591-3726  
http://www.hirose.com  
+
+
http://www.hirose-connectors.com  
The contents of this catalog are current as of date of 11/2013. Contents are subject to change without notice for the purpose of improvements.  
12  

相关型号：

SI9130DB

 5- and 3.3-V Step-Down Synchronous Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1-E3

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135_11

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9136_11

 Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130CG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130LG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130_11

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137DB

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137LG

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9122E

 500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification Drivers

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明