09062482835 [HARTING]
DIN-Power F048FS-4,5C1-1;型号: | 09062482835 |
厂家: | HARTING Technology Group |
描述: | DIN-Power F048FS-4,5C1-1 PC 连接器 |
文件: | 总4页 (文件大小:668K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Product data sheet
09 06 248 2835
DIN-Power F048FS-4,5C1-1
DIN-Power F048FS-4,5C1-1
Part number
Specification
09 06 248 2835
DIN-Power F048FS-4,5C1-1
HARTING eCatalogue https://b2b.harting.com/09062482835
Image is for illustration purposes only. Please refer to product description.
Identification
Category
Connectors
Series
DIN 41612
Type F
Identification
Element
Female connector
Straight
Description of the contact
Features
lead-free
Version
Termination method
Wave soldering termination
Motherboard to daughtercard
Mezzanine
Connection type
PCB to cable
Number of contacts
Contact configuration
Termination length
48
Rows z, d and b, positions 2, 4, ... , 30, 32
4.5 mm
Hole coding
Coding
Coding with loss of contacts
Shroud coding
PCB fixing
With fixing flange
Technical characteristics
Contact rows
3
5.08 mm
5.08 mm
Contact spacing (termination side)
Page 1 / 4 | Creation date 2021-08-27 | Please note that the data specified here were taken as extracts from the online catalogue. Please refer to
the user documentation for the complete and up-to-date information and data. Please also note that the user is responsible for validating functionality,
conformity with applicable laws and directives, as well as for the electrical safety in the particular application.
HARTING Electronics GmbH | Marienwerderstraße 3 | 32339 Espelkamp | Germany
Phone +49 5772 47-97200 | electronics@HARTING.com | www.HARTING.com
Product data sheet
09 06 248 2835
DIN-Power F048FS-4,5C1-1
Technical characteristics
3.81 mm
5.08 mm
Contact spacing (mating side)
Rated current
6 A
Rated current
Rated current measured at 20 °C, see derating curve for details
Clearance distance
Creepage distance
≥1.6 mm
≥3 mm
12
Insulation resistance
>10
Ω
Contact resistance
≤15 mΩ
Limiting temperature
-55 ... +125 °C
≤75 N
Insertion and withdrawal force
1
Performance level
Mating cycles
acc. to IEC 60603-2
≥500
1.55 kV (contact-contact)
2.5 kV (contact-ground)
Test voltage U
r.m.s.
Isolation group
Hot plugging
IIIa (175 ≤ CTI < 400)
No
Material properties
Material (insert)
Thermoplastic resin, glass-fibre filled
RAL 7032 (pebble grey)
Copper alloy
Colour (insert)
Material (contacts)
Noble metal over Ni Mating side
Sn over Ni Termination side
Surface (contacts)
Material flammability class acc. to UL 94
RoHS
V-0
compliant
ELV status
compliant
China RoHS
e
REACH Annex XVII substances
REACH ANNEX XIV substances
REACH SVHC substances
California proposition 65
No
No
No
Yes
Nickel
Antimony trioxide
California proposition 65 substances
Page 2 / 4 | Creation date 2021-08-27 | Please note that the data specified here were taken as extracts from the online catalogue. Please refer to
the user documentation for the complete and up-to-date information and data. Please also note that the user is responsible for validating functionality,
conformity with applicable laws and directives, as well as for the electrical safety in the particular application.
HARTING Electronics GmbH | Marienwerderstraße 3 | 32339 Espelkamp | Germany
Phone +49 5772 47-97200 | electronics@HARTING.com | www.HARTING.com
Product data sheet
09 06 248 2835
DIN-Power F048FS-4,5C1-1
Specifications and approvals
Specifications
IEC 60603-2
UL 1977 ECBT2.E102079
CSA-C22.2 No. 182.3 ECBT8.E102079
UL / CSA
Railway classification
F4/I3 acc. to NFF 16-101/102
Commercial data
Packaging size
20
Net weight
29.42 g
Country of origin
European customs tariff number
eCl@ss
Romania
85366990
27460201 PCB connector (board connector)
Current carrying capacity
The current carrying capacity of the connectors is
limited by the thermal load capability of the contact
element material including the connections and the
insulating parts. The derating curve is therefore
valid for currents which flow constantly (non-
intermittent) through each contact element of the
connector evenly, without exceeding the allowed
maximum temperature.
Measuring and testing techniques acc. to IEC
60512-5-2
Ambient temperature (°C)
Soldering instructions
The connectors should be protected when being soldered. Otherwise, they might become contaminated as a result of
soldering operations or deformed as a result of overheating.
1) For prototypes and short runs protect the connectors with an industrial adhesive tape, e.g. Tesaband 4331
(www.tesa.de). Cover the underside of the connector moulding and the adjacent parts of the pcb as well as the open
sides of the connector. This will prevent heat and gases of the soldering apparatus from damaging the connector.
About 140 + 5 mm of the tape should suffice.
2) For large series a jig is recommended. Its protective cover with a fast action mechanical locking devie shields the
connectors from gas and heat generated by the soldering apparatus. As an additional protection a foil can be used for
covering the parts that should not be soldered.
Page 3 / 4 | Creation date 2021-08-27 | Please note that the data specified here were taken as extracts from the online catalogue. Please refer to
the user documentation for the complete and up-to-date information and data. Please also note that the user is responsible for validating functionality,
conformity with applicable laws and directives, as well as for the electrical safety in the particular application.
HARTING Electronics GmbH | Marienwerderstraße 3 | 32339 Espelkamp | Germany
Phone +49 5772 47-97200 | electronics@HARTING.com | www.HARTING.com
Product data sheet
09 06 248 2835
DIN-Power F048FS-4,5C1-1
Mating conditions
To ensure reliable connections and prevent unnecessary damage, please refer to the application data diagrams.
These recommendations are set out in IEC 60603-2.
The connectors should not be coupled and decoupled under electrical load.
Page 4 / 4 | Creation date 2021-08-27 | Please note that the data specified here were taken as extracts from the online catalogue. Please refer to the
user documentation for the complete and up-to-date information and data. Please also note that the user is responsible for validating functionality,
conformity with applicable laws and directives, as well as for the electrical safety in the particular application.
HARTING Electronics GmbH | Marienwerderstraße 3 | 32339 Espelkamp | Germany
Phone +49 5772 47-97200 | electronics@HARTING.com | www.HARTING.com
相关型号:
090627-0134
2.54mm (.100") Pitch C-Grid III Header, Single Row, Vertical, with Kinked PC Tail, 14 Circuits, Tin (Sn) Plating
MOLEX
0906270124
2.54mm (.100") Pitch C-Grid III Header, Single Row, Vertical, with Kinked PC Tail, 4 Circuits, Tin (Sn) Plating
MOLEX
0906270128
2.54mm (.100") Pitch C-Grid III Header, Single Row, Vertical, with Kinked PC Tail, 8 Circuits, Tin (Sn) Plating
MOLEX
0906270130
2.54mm (.100") Pitch C-Grid III Header, Single Row, Vertical, with Kinked PC Tail, 10 Circuits, Tin (Sn) Plating
MOLEX
0906270131
2.54mm (.100") Pitch C-Grid III Header, Single Row, Vertical, with Kinked PC Tail, 11 Circuits, Tin (Sn) Plating
MOLEX
0906270132
2.54mm (.100") Pitch C-Grid III Header, Single Row, Vertical, with Kinked PC Tail, 12 Circuits, Tin (Sn) Plating
MOLEX
0906270134
2.54mm (.100") Pitch C-Grid III Header, Single Row, Vertical, with Kinked PC Tail, 14 Circuits, Tin (Sn) Plating
MOLEX
©2020 ICPDF网 联系我们和版权申明