H10723_15 [HAMAMATSU]
Metal Package PMT;
| 型号： | H10723_15 |
| 厂家： | 
HAMAMATSU CORPORATION |
| 描述： | Metal Package PMT |
| 文件： | 总2页 (文件大小：84K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Metal Package PMT
Photosensor Modules H10723 Series
The H10723 series is a photosensor module containing a metal package PMT, a
low-power consumption high-voltage power supply circuit, and a low-noise
amplifier. The amplifier converts the PMT current output to a voltage output so
that signal can be easily processed. Also, the amplifier is connected close to the
PMT anode output pin to make the signal less affected by external noise. The
H10723 series covers a frequency bandwidth from DC to 200 kHz, which is wider
than that for the H10722 series.
Four types of photocathodes are available, including a super bialkali
photocathode that has higher sensitivity than conventional bialkali photocathodes,
an ultra bialkali photocathode that offers even higher sensitivity, a multialkali
photocathode with sensitivity extending to the near infrared region, and a red
sensitivity enhanced multialkali photocathode.
Product Variations
Current-to-Voltage Frequency
Parameter
Spectral Response
Features
Conversion Factor* Bandwidth*
H10723-110
H10723-210
H10723-01
H10723-20
230 nm to 700 nm
230 nm to 700 nm
230 nm to 870 nm
230 nm to 920 nm
Super bialkali photocathode, high sensitivity in visible range
Ultra bialkali photocathode, high sensitivity in visible range
For visible to near IR range
0.1 V/µA
DC to 200 kHz
Infrared-extended multialkali photocathode with enhanced sensitivity
* The amplifier specification can be changed upon request. Feel free to contact our sales office.
This product can't be used at vacuum environment or reduced pressure environment.
Specifications
(at +25 °C)
Parameter
H10723-110
H10723-210
H10723-01
H10723-20
Unit
V
Input Voltage
4.5 to 5.5
Max. Input Voltage
Max. Input Current *1
Max. Output Signal Voltage *2
5.5
+6.2 / -3.5
V
mA
V
+4 (Load resistance 10 kΩ)
+1.1 (Input Impedance 1 MΩ)
+0.5 to +1.1 (Input Impedance 1 MΩ)
8
Max. Control Voltage
V
Recommended Control Voltage Adjustment Range
Effective Area
V
mm
nm
Peak Sensitivity Wavelength
400
80
400
100
400
100
630
350
Min.
Luminous Sensitivity
µA/lm
Typ.
105
135
200
500
Blue Sensitivity Index (CS 5-58) Typ.
13.5
—
15.5
—
—
—
—
—
Red / White Ratio
Typ.
Typ.
Min.
Typ.
Typ.
Typ.
Max.
0.2
0.45
78
3.5 × 107
1.0 × 108
15
Radiant Sensitivity *3
110
130
77
mA/W
8.0 × 106
2.1 × 107
22
1.0 × 107
2.7 × 107
26
1.0 × 107
4.0 × 107
15
4
Luminous Sensitivity
*
V/lm
V/nW
mV
Radiant Sensitivity *3 *4
Voltage Output Depending
on PMT Dark Current *4 *5
0.1
0.1
0.1
1
1
1
1
10
Current-to-Voltage Conversion Factor
0.1
V/µA
mV
mV
s
Output Offset Voltage
Ripple Noise *4 *6 (peak to peak)
Settling Time *7
Typ.
1
0.5
Max.
Max.
10
Operating Ambient Temperature *8
Storage Temperature *8
Weight
+5 to +50
°C
°C
g
-20 to +50
90
Typ.
*1: At 5 V input voltage, +1.0 V control voltage, and output current equal to dark current
*3: Measured at the peak sensitivity wavelength *4: Control voltage = +1.0 V
*2: At 5 V input voltage
*5: After 30 minutes storage in darkness. The actual output value in darkness is the sum of dark current and offset voltage.
*6: Cable RG-174/U, Cable length 450 mm, Load resistance = 1 MΩ, Load capacitance = 22 pF
*7: The time required for the output to reach a stable level following a change in the control voltage from +1.0 V to +0.5 V.
*8: No condensation
34
Voltage Output Type Photosensor Modules
Characteristics (Anode radiant sensitivity, PMT gain)
PMT GAIN: 105
PMT GAIN: 105
TPMOB0227EB
TPMOB0228EB
TPMOB0226EA
107
10
10
-210
-20
106
1
1
0.1
0.1
105
-110
-01
104
0.01
0.001
0.01
0.001
103
0.5
0.6
0.7
0.8
0.9 1.0 1.1 1.2
200 300 400 500 600 700 800 900 1000
200 300 400 500 600 700 800 900 1000
CONTROL VOLTAGE (V)
WAVELENGTH (nm)
WAVELENGTH (nm)
Sensitivity Adjustment Method
VOLTAGE PROGRAMMING
RESISTANCE PROGRAMMING
PHOTOSENSOR MODULE
POWER SUPPLY
PHOTOSENSOR MODULE
POWER SUPPLY
SIGNAL OUTPUT
LOW VOLTAGE INPUT (RED)
LOW VOLTAGE INPUT (GREEN)
GND (BLACK)
SIGNAL OUTPUT
LOW VOLTAGE INPUT (RED)
LOW VOLTAGE INPUT (GREEN)
GND (BLACK)
+5 V
-5 V
GND
+5 V
-5 V
GND
Vref OUTPUT (BLUE)
Vref OUTPUT (BLUE)
Vcont INPUT (WHITE)
Vcont INPUT (WHITE)
MONITOR
+0.5 V to
+1.1 V
• Adjust the control voltage to
adjust the sensitivity.
POTENTIOMETER (10 kΩ)
• Electrically insulate the
reference voltage output.
* When using a potentiometer, adjust sensitivity while monitoring
the control voltage so it does not exceed +1.1 V.
GND
TPMOC0232EA
Options (Optical Fiber Adapter)
Dimensional Outlines (Unit: mm)
(Unit: mm)
THREADED HOLE for OPTION
E5776 (FC Type)
(4-M2 DEPTH: 4)
22.0 0.5
14.0 0.2
EFFECTIVE AREA ( 8)
14.0 0.2
12.0 0.2
0.5
GASKET
(Supplied)
MOUNTING THREADED HOLE
(2-M2.6 DEPTH: 3)
11
26
21
FRONT VIEW
4-M2
FC-R
10
FRONT VIEW
SIDE VIEW
16.2 0.2
LOW VOLTAGE INPUT (+5 V) : AWG26 (RED)
LOW VOLTAGE INPUT (-5 V) : AWG26 (GREEN)
TACCA0055EB
GND
: AWG26 (BLACK)
: AWG26 (BLUE)
E5776-51 (SMA Type)
Vref OUTPUT (+1.2 V)
WINDOW
Vcont INPUT (+0.5 V to +1.1 V): AWG26 (WHITE)
SIGNAL OUTPUT
: RG-174/U
22.0 0.5
14.0 0.2
0.5
51.0 0.5
450 20
SIDE VIEW
GASKET
(Supplied)
TPMOA0064EA
SMA
3.18
4-M2
FRONT VIEW
SIDE VIEW
TACCA0239EB
35
©2020 ICPDF网 联系我们和版权申明