C8366_15 [HAMAMATSU]

Current-to-voltage conversion amplifier;
C8366_15
型号: C8366_15
厂家: HAMAMATSU CORPORATION    HAMAMATSU CORPORATION
描述:

Current-to-voltage conversion amplifier

文件: 总4页 (文件大小:563K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
Photosensor amplifier  
C8366 series  
Current-to-voltage conversion amplifier  
(C8366: for high-speed Si PIN photodiode  
C8366-01: for high-speed InGaAs PIN photodiode)  
Features  
Applications  
Wide band  
High-speed photometry  
DC to 100 MHz Typ. (-3 dB; varies depending on the  
photodiode used)  
Laser monitors  
Optical power meters  
Easy photodiode connection  
Just inserting the photodiode lead pins makes the connection.  
(Compatible with TO-8, TO-5 and TO-18 packages)  
Adjustable response speed  
Response speed can be adjusted by a trimmer potenti-  
ometer easily.  
Compact size  
Absolute maximum ratings  
Supply voltage  
Operating temperature  
Storage temperature  
Type no.  
Vcc max  
(V)  
Topr*1  
Tstg *1  
(°C)  
(°C)  
C8366  
C8366-01  
±18  
0 to +50  
-0 to +70  
*1: No condensation  
Note: Exceeding the absolute maximum ratings even momentarily may cause a drop in product quality. Always be sure to use the  
product within the absolute maximum ratings.  
Electrical and optical characteristics (Typ. Ta=25 °C, Vcc=±15 V, unless otherwise noted)  
Operating supply voltage  
Current consumption*2  
Frequency bandwidth*3  
Vcc  
(V)  
Icc  
(mA)  
Max.  
Conversion impedance  
fc  
-3 dB  
(MHz)  
Type no.  
Rf  
(V/A)  
Min.  
±15  
Max.  
±18  
C8366  
C8366-01  
±30  
1 × 103  
100  
Maximum output  
amplitude  
VFS  
Output offset voltage*2  
Vos  
(mV)  
Output noise  
voltage*2 *4  
Vn  
Photodiode  
Output resistance reverse bias voltage  
Type no.  
RL=1 k  
(V)  
Ω
Zo  
VR  
Min.  
+3  
Typ.  
Min.  
-1  
Max.  
+1  
(mVp-p)  
( )  
(V)  
-12  
-1.25  
C8366  
C8366-01  
+3.5  
3
50  
*2: When photodiode is not mounted  
*3: C8366 series device  
*4: Within frequency band  
1
www.hamamatsu.com  
Photosensor amplier  
C8366 series  
Connectable Hamamatsu Si PIN photodiodes (sold separately)  
Si PIN photodiode (for C8366)  
Spectral response  
Peak sensitivity  
wavelength  
p  
Cutoff frequency*  
range  
fc  
-3 dB  
(MHz)  
Photosensitive area  
Type no.  
Package  
(nm)  
320 to 1060  
(nm)  
920  
(mm)  
5.0  
3.0  
1.5  
1.2  
1.2  
0.8  
0.4  
S3071  
S3399  
S3883  
S5821 series  
S5971  
TO-8  
TO-5  
30  
100  
20  
320 to 1000  
840  
320 to 1100  
320 to 1060  
960  
900  
800  
760  
TO-18  
100  
S5972  
S5973 series  
320 to 1000  
* Cutoff frequency when combined with C8366  
InGaAs PIN photodiode (for C8366-01)  
Spectral response  
range  
Peak sensitivity  
wavelength  
p  
Cutoff frequency*  
fc  
-3 dB  
(MHz)  
Photosensitive area  
Type no.  
Package  
TO-18  
(nm)  
(nm)  
(mm)  
0.3  
0.5  
0.3  
0.5  
0.3  
0.5  
G8376-03  
900 to 1700  
G8376-05  
G10899-003K  
500 to 1700  
G10899-005K  
G12180-003A  
900 to 1700  
G12180-005A  
100  
80  
100  
80  
100  
80  
1550  
* Cutoff frequency when combined with C8366-01  
Block diagram  
Adjustment trimmer  
Cf  
Rf  
Photodiode (externally connected)  
Cathode  
I/V conversion  
amplifier  
Output Vout  
Power input  
Case  
-V  
+V  
GND  
+Vcc  
GND  
-Vcc  
Anode  
VR  
Power supply circuit  
KACCC0752EA  
2
Photosensor amplier  
C8366 series  
Dimensional outline (unit: mm)  
19 ± 1  
52 ± 1  
Output connector  
BNC-R  
Power connector  
HR10A-7R-4P(73)  
(Hirose Electric, 4-pin, male)  
1.5 ± 0.5  
Photodiode holder  
C±366: Holders for TO-±, TO-5, and TO-1± included  
C±366-01: Holder for TO-1± included  
Photodiode holder mounting screws  
14 ± 0.5  
Mounting screw hole M4, depth 7 max.  
KACCA0335EA  
Connection example  
BNC cable* (2 m or less)  
Readout device (oscilloscope, etc.)  
Input terminal impedance  
1 MΩ or more  
Power cable (30 cm, included)  
(Red) +15 V  
(Black) GND  
(Blue) -15 V  
Dual power supply (±15 to ±1± V, 0.1 A or more)  
Be sure to use the dual power supply with positive  
and negative output.  
Secure with optical bench rod, etc.  
* BNC cable is not included.  
KACCC0754EA  
3
Photosensor amplier  
C8366 series  
Accessories  
Photodiode holder  
·
C8366: One each for TO-5, TO-8 and TO-18  
C8366-01: One for TO-18  
Two photodiode holder mounting screws  
5 mm M3 pan head screws  
·
·
Power cable 30 cm (AWG24 lead wires)  
30 cm  
Connector HR10A-7P-4S  
(Hirose Electric, 4-pin, female)  
KACCC0755EA  
Options (sold separately, unit: mm)  
BNC cable E2573  
This cable can be used to extract signals from the photosensor amplier.  
Specifications  
Cable specifications: 1.5D-QEV  
+50  
-0  
1000  
KACCA0334EA  
Related information  
www.hamamatsu.com/sp/ssd/doc_en.html  
Precautions  
Notice  
·
Information described in this material is current as of November, 2014.  
Product specifications are subject to change without prior notice due to improvements or other reasons. This document has been carefully prepared and the  
information contained is believed to be accurate. In rare cases, however, there may be inaccuracies such as text errors. Before using these products, always  
contact us for the delivery specification sheet to check the latest specifications.  
The product warranty is valid for one year after delivery and is limited to product repair or replacement for defects discovered and reported to us within that  
one year period. However, even if within the warranty period we accept absolutely no liability for any loss caused by natural disasters or improper product  
use.  
Copying or reprinting the contents described in this material in whole or in part is prohibited without our prior permission.  
www.hamamatsu.com  
HAMAMATSU PHOTONICS K.K., Solid State Division  
1126-1 Ichino-cho, Higashi-ku, Hamamatsu City, 435-±55± Japan, Telephone: (±1) 53-434-3311, Fax: (±1) 53-434-51±4  
U.S.A.: Hamamatsu Corporation: 360 Foothill Road, Bridgewater, N.J. 0±±07, U.S.A., Telephone: (1) 90±-231-0960, Fax: (1) 90±-231-121±  
Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-±2211 Herrsching am Ammersee, Germany, Telephone: (49) ±152-375-0, Fax: (49) ±152-265-±  
France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91±±2 Massy Cedex, France, Telephone: 33-(1) 69 53 71 00, Fax: 33-(1) 69 53 71 10  
United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44) 1707-294±±±, Fax: (44) 1707-325777  
North Europe: Hamamatsu Photonics Norden AB: Torshamnsgatan 35 16440 Kista, Sweden, Telephone: (46) ±-509-031-00, Fax: (46) ±-509-031-01  
Italy: Hamamatsu Photonics Italia S.r.l.: Strada della Moia, 1 int. 6, 20020 Arese (Milano), Italy, Telephone: (39) 02-935±1733, Fax: (39) 02-935±1741  
China: Hamamatsu Photonics (China) Co., Ltd.: B1201, Jiaming Center, No.27 Dongsanhuan Beilu, Chaoyang District, Beijing 100020, China, Telephone: (±6) 10-65±6-6006, Fax: (±6) 10-65±6-2±66  
4
Cat. No. KACC1067E06 Nov. 2014 DN  

相关型号:

C8395BH

16-Bit Microcontroller
ETC

C83C152JA

8-Bit Microcontroller
ETC

C83C152JA-1

8-Bit Microcontroller
ETC

C83C152JC

8-Bit Microcontroller
ETC

C83C152JC-1

8-Bit Microcontroller
ETC

C83C152JC-1/ROM

Microcontroller, 8-Bit, MROM, 8051 CPU, 16.5MHz, CMOS, CDIP48
INTEL

C83C251SA

Microcontroller, 8-Bit, MROM, 12MHz, CMOS, CDIP40, CERAMIC, DIP-40
INTEL

C83C251SA16

HIGH-PERFORMANCE CHMOS MICROCONTROLLER
INTEL

C83C251SB-16

Microcontroller, 8-Bit, MROM, 80251 CPU, 16MHz, CMOS, CDIP40, CERAMIC, DIP-40
INTEL

C83C251SB16

HIGH-PERFORMANCE CHMOS MICROCONTROLLER
INTEL

C83C251SP

Microcontroller, 8-Bit, MROM, 12MHz, CMOS, CDIP40, CERAMIC, DIP-40
INTEL

C83C251SP16

HIGH-PERFORMANCE CHMOS MICROCONTROLLER
INTEL