C13015_15 [HAMAMATSU]
For CMOS linear image sensor S11639;
| 型号： | C13015_15 |
| 厂家： | 
HAMAMATSU CORPORATION |
| 描述： | For CMOS linear image sensor S11639 |
| 文件： | 总6页 (文件大小：817K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Driver circuit for CMOS linear image sensor
C13015
For CMOS linear image sensor S11639
The C13015 is a driver circuit developed for Hamamatsu CMOS linear image sensor S11639. By connecting the C13015 to a
PC through the USB 2.0 interface, you can control the C13015 from the PC and acquire 16-bit digital output numeric data con-
verted from the sensor’s analog video signal. The C13015 consists of a sensor circuit board that drives the sensor and an in-
terface circuit board that drives the sensor circuit board and performs data communication with the PC. The two circuit boards
are connected via a flexible cable. The sensor circuit board is compact, making it easy to be installed in optical systems. The
interface circuit board has an external trigger I/O connectors that can be used to synchronize with external devices. This
product comes with application software (DcIc-USB) that runs on Windows 7 (32-bit, 64-bit). It can be used to easily control
the C13015 from the PC. The product also includes a DLL that the user can use to create original C13015 control programs.
Features
Application
Built-in 16-bit A/D converter
Spectrometers
Compact sensor circuit board: Easy to install in optical systems
Interface: USB 2.0
CMOS linear image sensor S11639 control and data acquisition
External synchronization capable
Single power supply: USB bus powered (+5 VDC)
The C13015 is compatible with the following CMOS linear image sensor. Note that the C13015 does not include a sensor.
Number of effective
pixels
Pixel size
(μm)
14 × 200
Image size
[mm (H) × mm (V)]
28.672 × 0.200
Type no.
S11639
Number of pixels
2048 × 1
2048 × 1
Structure
Parameter
Specification
Digital
16
USB 2.0
Unit
Output type
-
bit
-
A/D resolution
Interface
Absolute maximum ratings
Parameter
Symbol
Vdd
Vi
Topr
Tstg
Condition
Ta=25 °C
Ta=25 °C
No dew condensation*
No dew condensation*
Value
Unit
V
V
°C
°C
Supply voltage
Input signal voltage*
0 to +6.0
0 to +Vdd
0 to +50
-20 to +70
1
2
2
Operating temperature
Storage temperature
*1: Trigger input
*2: When there is a temperature difference between a product and the surrounding area in high humidity environment, dew condensation
may occur on the product surface. Dew condensation on the product may cause deterioration in characteristics and reliability.
Note: Exceeding the absolute maximum ratings even momentarily may cause a drop in product quality. Always be sure to use the
product within the absolute maximum ratings.
1
www.hamamatsu.com
Driver circuit for CMOS linear image sensor
C13015
Electrical characteristics (Ta=25 °C)
Parameter
Readout frequency
Line rate*
Symbol
fop
-
Condition
Min.
-
-
Typ.
10
-
Max.
-
4
Unit
MHz
kHz
3
Conversion gain
Trigger output
voltage
Gc
Gain=1
-
3.8
-
+3.5
-
28
-
-
-
-
350
-
-
Vdd
0.6
Vdd
1.5
μV/ADU
High level
Low level
High level
Low level
V
V
V
-
-
Vdd=+5 V
Vdd=+5 V
Trigger input
voltage
Current consumption
High start pulse period* *
V
Ic
-
500
mA
clock*
clock*
4
6
5
thp(ST)
tpi(ST)
10
2500
tpi(ST) - 200
4294967295
4
7
5
Start pulse period*
*
-
*3: Theoretical line rate value determined by the internal operation timing of the driver circuit. This is different from the line rate defined
in the sensor specifications. This is also different from the rate (system rate) in a series of processes that acquire data into the PC via
the USB 2.0 port.
*4: thp(ST) < tpi(ST)
*5: 1 clock=1/fop
*6: A maximum value exists when the synchronization mode is internal mode, external edge mode, or external gate mode.
*7: A maximum value exists when the synchronization mode is internal mode or external gate mode.
Electrical and optical characteristics (Ta=25 °C)
Parameter
Readout noise
Symbol
Nr
Min.
-
Typ.
50
Max.
-
Unit
ADU rms
Saturation output
Dynamic range*
Operating voltage
Dsat
DR
-
-
-
-
65535
-
+5.25
ADU
-
V
8
1300
+5.0
+4.75
*8: DR=Dsat/Nr
Functions
Function
Description
The following trigger modes are available. For the detailed timing of each mode, see “Trigger mode”
in “Timing chart” (P.4).
Internal mode
·
·
·
·
Trigger mode change
External edge mode
External level mode
External gate mode
The gain can be set to a value between 1 and 6 with a 6-bit number ranging from 0 to 63. The preset gain
is calculated by the following equation. The default gain is 1.
6
Gain adjustment
Gain=
63 - G
1 + 5
(
)
63
G: 6-bit value
The offset can be set in the range of -255 to +255. The offset increment per step is approximately 1.2
mV. The offset is set by writing a 9-bit value to the C13015 internal register. If the most significant
bit (MSB) of the 9-bit value is zero, the offset is positive. Otherwise, the offset is negative. The bit
values other than the MSB are the magnitude of the offset. Note that because the offset circuit is
arranged before the amplifier stage, the actual offset is equal to the offset value set above × gain.
Offset adjustment
Integration time change
Start pulse period change
The sensor integration time is changed by changing the high period of the ST pulse.
A maximum value exists for internal mode or external gate mode.
2
Driver circuit for CMOS linear image sensor
C13015
Block diagram
[S11639]
[C13015]
Power supply
Level converter
VDD
+5 V
USB bus power
USB
Power supply
START, CLK
CPU&USB
control
⇔
+5.0 V
+3.3 V
VIDEO
Buffer
Trigger IN
Trigger OUT
CMOS sensor
Timing
circuit
16
AFE
(A/D converter)
Sensor circuit board
Interface circuit board
Flexible cable
KACCC0774EA
Timing chart
Sensor drive timing
The two parameters that can be changed for the sensor drive timing are the ST pulse width thp(ST) and the line period tpi(ST). For
the thp(ST) and tpi(ST) setting ranges in internal mode, external edge mode, and external gate mode (explained later), see “Electrical
characteristics” (P.2). The values T1, T2, and T3 in the following figure are fixed. For details, refer to the S11639 CMOS linear image
sensor datasheet.
Integration time
T1
T2
CLK
ST
Video
thp(ST)
tlp(ST)
tpi(ST)
T3
KACCC0780EA
The following condition must be met.
tpi(ST) > thp(ST)
3
Driver circuit for CMOS linear image sensor
C13015
Trigger mode
Internal mode
When a Start command is received from the PC, the C13015 starts sensor integration and outputs acquired image data.
Line period
Start
Stop
Sensor integration
Sensor output
Video data
Video data
Video data
Video data
Video data
Video data
Camera output
KACCC0775EA
External edge mode
The sensor integration is synchronized to the edges of an external input trigger signal. When the circuit receives an external trigger
after having received a Start command, the circuit sends the image data output from the sensor to the PC.
Trigger input
Start
Stop
Sensor integration
Sensor output
Video data
Video data
Video data
Video data
Camera output
KACCC0776EA
External level mode
Integration time and line transmission period are controlled using an external trigger signal.
Start
Stop
Trigger input
Sensor integration
Video data
Video data
Video data
Video data
Sensor output
Camera output
KACCC0777EA
External gate mode
Integration is performed only while the external trigger is valid.
Trigger input
Line period
Start
Stop
Sensor integration
Video data
Video data
Video data
Video data
Video data
Sensor output
Camera output
Video data
KACCC0778EA
4
Driver circuit for CMOS linear image sensor
C13015
Dimensional outline (unit: mm)
Sensor circuit board
[Sensor attachment side]
(4.2)
Index mark
80 0.3
70 0.1
1.6 0.19
(3)
(4×) ϕ3.2
(12.3)
Interface circuit board
(7.1)
80 0.3
70 0.1
1.6 0.19
(2)
(4×) ϕ3.2
(12.3)
Tolerance unless otherwise noted
complies with JIS B 0408-B.
KACCA0359EA
Weight: approx. 40 g (including the flexible cable but not the sensor)
5
Driver circuit for CMOS linear image sensor
C13015
Connection example
USB 2.0
PC
External trigger input
External trigger output
Pulse generator
Laser light source
[C13015]
KACCC0779EA
Accessories
CD-ROM (includes the instruction manual, application software, and DLL file)
USB (Mini B) cable
Flexible cable for connecting sensor circuit board and interface circuit board
·
·
·
Related information
www.hamamatsu.com/sp/ssd/doc_en.html
Precautions
Disclaimer
Image sensor
·
·
Related product datasheet
Available at our website (www.hamamatsu.com)
CMOS linear image sensor S11639
·
Information described in this material is current as of June, 2015.
Product specifications are subject to change without prior notice due to improvements or other reasons. This document has been carefully prepared and the
information contained is believed to be accurate. In rare cases, however, there may be inaccuracies such as text errors. Before using these products, always
contact us for the delivery specification sheet to check the latest specifications.
The product warranty is valid for one year after delivery and is limited to product repair or replacement for defects discovered and reported to us within that
one year period. However, even if within the warranty period we accept absolutely no liability for any loss caused by natural disasters or improper product use.
Copying or reprinting the contents described in this material in whole or in part is prohibited without our prior permission.
www.hamamatsu.com
HAMAMATSU PHOTONICS K.K., Solid State Division
1126-1 Ichino-cho, Higashi-ku, Hamamatsu City, 435-8558 Japan, Telephone: (81) 53-434-3311, Fax: (81) 53-434-5184
U.S.A.: Hamamatsu Corporation: 360 Foothill Road, Bridgewater, N.J. 08807, U.S.A., Telephone: (1) 908-231-0960, Fax: (1) 908-231-1218
Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49) 8152-375-0, Fax: (49) 8152-265-8
France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: 33-(1) 69 53 71 00, Fax: 33-(1) 69 53 71 10
United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44) 1707-294888, Fax: (44) 1707-325777
North Europe: Hamamatsu Photonics Norden AB: Torshamnsgatan 35 16440 Kista, Sweden, Telephone: (46) 8-509-031-00, Fax: (46) 8-509-031-01
Italy: Hamamatsu Photonics Italia S.r.l.: Strada della Moia, 1 int. 6, 20020 Arese (Milano), Italy, Telephone: (39) 02-93581733, Fax: (39) 02-93581741
China: Hamamatsu Photonics (China) Co., Ltd.: B1201, Jiaming Center, No.27 Dongsanhuan Beilu, Chaoyang District, Beijing 100020, China, Telephone: (86) 10-6586-6006, Fax: (86) 10-6586-2866
6
Cat. No. KACC1231E01 Jun. 2015 DN
相关型号：
©2020 ICPDF网 联系我们和版权申明