C12492-210_15 [HAMAMATSU]

Infrared detector modules with preamp;


型号：	C12492-210_15
厂家：	HAMAMATSU CORPORATION
描述：	Infrared detector modules with preamp
文件：	总5页 (文件大小：406K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Infrared detector modules with preamp

Thermoelectrically cooled type

Easy-to-use detector modules with built-in

preamps

Infrared detector modules operate just by connecting to DC power supplies. The detector is selectable from among InAs

and MCT, which are all combined with a thermoelectric cooler. We welcome requests for custom devices that suit your

application.

Features

Applications

Infrared detection

Accessories

High S/N

Compact size

Easy to use

Operates just by connecting to DC power supply

Circuit design optimized for detector characteristics

6-conductor cable for TE-cooled type (for DC power

supply) A4372-07: 2 m (connector installed at one end)

Built-in temperature control circuit

(fixed control temperature)

Instruction manual

Structure / Absolute maximum ratings

Absolute maximum ratings

Photosensitive

Operating temperature Storage temperature

Supply voltage

area

Type no.

Detector

Topr

(°C)

Tstg

(°C)

Vcc

(V)

Vp*¹

(V)

(mm)

C12492-210

C12495-211S

C12495-311M

C12495-111L

InAs (P10090-21)

MCT (P3981)

MCT (P2750)

1

0 to +40

-20 to +50

±18

MCT (P3257-101)

*1: Power supply for TE-cooled detector

Note: Exceeding the absolute maximum ratings even momentarily may cause a drop in product quality. Always be sure to use the

product within the absolute maximum ratings.

www.hamamatsu.com

Infrared detector modules with preamp

Thermoelectrically cooled type

Electrical and optical characteristics (Typ. Ta=25 °C, Vcc=±15 V, Vp=+2.5 V *², unless otherwise noted)

Noise

Frequency

response

-3 dB

Maximum

output

voltage

RL=1 k

Element

temper- sensitivity

ature wavelength

Peak

Current

consumption

Supply voltage*³

Photosensitivity equivalent

Output

impe-

dance

Cutoff

wave-

length

=p

power

NEP

(W/Hz^1/2

Type no.

(Hz)

(V)

(mA)

Vcc=±15V



(V/W)

)

fcL

fcH

(V)

Vcc, Vee

(°C) (μm)

Min. Typ. Typ. Max. Typ. Max. Min. Typ. () Min. Typ. Min. Typ. Max. Min. Typ. Max. Typ. Max. Typ. Max.

C12492-210 -28

C12495-211S -25

C12495-311M -58

3.25 3.45 0.8 10⁷1.0 10⁷4.0 10^-121.0 10^-11

10 80 k 100 k 50 ±12 ±13 ±14.5 ±15 ±15.5 2.4 2.5 3.5 +60,-20 +80,-30 600 1100

10 7 k 15 k 50 ±12 ±13 ±14.5 ±15 ±15.5 2.4 2.5 3.5 +60,-16 +80,-25 600 1100

10 20 k 35 k 50 ±12 ±13 ±14.5 ±15 ±15.5 4.25 4.5 4.75 +60,-16 +80,-25 600 1100

3.6

4.8

6.5

4.3 1.3 10⁷2.0 10⁷2.0 10^-121.0 10^-11

5.5 0.8 10⁷1.0 10⁷5.0 10^-123.0 10^-11

C12495-111L

-3

11.5 1.3

2.0 10^-71.2 10^-6

350 k 500 k 50 12 13 ±14.5 ±15 ±15.5 2.4 2.5 3.5 +130,-20 +150,-30 800 1400

*2: Vp=+2.5 V (C12492-210, C12495-211S), +4.5 V (C12495-311M)

*3: Vcc=±15 V, Vp =2.5 V or Vp =4.5 V

Recommended DC power supply (analog power supply): E3630A (Agilent Technologies)

Current capacity: More than 1.5 times the maximum current consumption

Ripple noise: 5 mVp-p or less (±15 V power supply)

5 mVp-p or less (+2.5 V, +4.5 V power supply)

Spectral response

(Typ.)

10¹²

C12495-211S (Td=-25 °C)

10¹¹

C12495-311M (Td=-58 °C)

10¹⁰

10⁹

C12492-210 (Td=-28 °C)

10⁸

C12495-111L (Td=-3 °C)

10⁷

10⁶

10⁵

10 11 12

Wavelength (µm)

KIRDB0551EA

Infrared detector modules with preamp

Thermoelectrically cooled type

Dimensional outlines (unit: mm)

C12492-210/C12495-211S

(4×) 3.2 depth 14.5 + M3 depth 5

(for M3 countersunk screw)

3.3 0.2

Photosensitive

area

Photosensitive

surface

26 0.3

75.2

Cooling fin

(front side)

(4 ×) M3 depth 5 (threaded hole)

BNC connector (signal output)

46 0.3

6-pin connector (voltage input)

Tolerance unless otherwise noted:

0.8

KIRDA00232EA

Note: The cooling fin (front side) is removable. The cooling performance is not guaranteed if removed.

C12495-311M

(4×) 3.2 depth 24.5 + M3 depth 5

(for M3 countersunk screw)

Photosensitive

area

4.6 0.5 (photosensitive surface)

Photosensitive

surface

66.5

31 0.3

0.2

116.5

46 0.3

Cooling fin (front side)

BNC connector

(signal output)

6-pin connector

(voltage input)

(4 ×) M3 depth 5 (threaded hole)

Tolerance unless otherwise noted:

KIRDA0233EA

Note: The cooling fin (front side) is removable. The cooling performance is not guaranteed if removed.

Infrared detector modules with preamp

Thermoelectrically cooled type

C12495-111L

(4×) 3.2 depth 14.5 + M3 depth 5

(for M3 countersunk screw)

4.85 0.2

Photosensitive

area

Photosensitive

surface

26 0.3

Cooling fin

(front side)

(4 ×) M3 Depth 5 (threaded hole)

BNC connector (signal output)

6-pin connector (voltage input)

27.2

62.8 0.3

0.7 0.4

Offset voltage adjustment screw

Tolerance unless otherwise noted:

KIRDA00235EA

Note: The cooling fin (front side) is removable. The cooling performance is not guaranteed if removed.

Cable (for DC power supply) A4372-07

Solder

processing

90 10

1900 10

Connector: LF07WBP-6P

(made by Hirose Electric)

Tolerance unless otherwise noted:

Pin no.

Pin connection

Lead color

Red

+2.5 V or +4.5 V

Power supply for cooling controller

GND

Blue

Power supply for cooling controller

Output for temperature monitor

Light green

Yellow

+15 V

-15 V

GND

White

Black

Plug (looking into the plug)

Note: With shield wire

KIRDA0241EA

Note: Remove the braid from the shield cable and keep the wires together.

Infrared detector modules with preamp

Thermoelectrically cooled type

Precautions

· This detector will not operate without cooling. Always supply +2.5 V or +4.5 V to cool the detector element.

· Always use a dual-polarity (±15 V) power supply to operate this detector. Never use a single-polarity (+15 V or -15 V only) power

supply. Using a single-polarity power supply may cause the ampliﬁer in the detector module to break down.

· Be careful not to apply excessive force to the detector element surface. Applying excessive force may damage the light input window.

Do not directly touch the light input window with bare hands. If dust or dirt gets on the window, wipe it gently using ethyl alcohol.

· Do not drop this product or do not apply excessive shock to it.

Related information

http://www.hamamatsu.com/sp/ssd/doc_en.html

Precautions

∙ Notice

Technical information

∙ Infrared detectors / Technical information

Information described in this material is current as of February, 2014.

Product specifications are subject to change without prior notice due to improvements or other reasons. This document has been carefully prepared and the

information contained is believed to be accurate. In rare cases, however, there may be inaccuracies such as text errors. Before using these products, always

The product warranty is valid for one year after delivery and is limited to product repair or replacement for defects discovered and reported to us within that

one year period. However, even if within the warranty period we accept absolutely no liability for any loss caused by natural disasters or improper product

use.

Copying or reprinting the contents described in this material in whole or in part is prohibited without our prior permission.

www.hamamatsu.com

HAMAMATSU PHOTONICS K.K., Solid State Division

1126-1 Ichino-cho, Higashi-ku, Hamamatsu City, 435-8558 Japan, Telephone: (81) 53-434-3311, Fax: (81) 53-434-5184

U.S.A.: Hamamatsu Corporation: 360 Foothill Road, Bridgewater, N.J. 08807, U.S.A., Telephone: (1) 908-231-0960, Fax: (1) 908-231-1218

Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49) 8152-375-0, Fax: (49) 8152-265-8

France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: 33-(1) 69 53 71 00, Fax: 33-(1) 69 53 71 10

United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44) 1707-294888, Fax: (44) 1707-325777

North Europe: Hamamatsu Photonics Norden AB: Torshamnsgatan 35 16440 Kista, Sweden, Telephone: (46) 8-509-031-00, Fax: (46) 8-509-031-01

Italy: Hamamatsu Photonics Italia S.r.l.: Strada della Moia, 1 int. 6, 20020 Arese (Milano), Italy, Telephone: (39) 02-93581733, Fax: (39) 02-93581741

China: Hamamatsu Photonics (China) Co., Ltd.: B1201, Jiaming Center, No.27 Dongsanhuan Beilu, Chaoyang District, Beijing 100020, China, Telephone: (86) 10-6586-6006, Fax: (86) 10-6586-2866

Cat. No. KIRD1122E01 Feb. 2014 DN

C12492-210_15 [HAMAMATSU]

相关型号：

C12495-111L

C12495-211S

C12495-311M

C12496-046

C12496-046_15

C124C

C124C-K-G

C124C102D1G5CA

C124C102D1R5CA

C124C102D2G5CA

C124C102D2R5CA

C124C102D5G5CA