LCR-8000G [GWINSTEK]
10MHz / 5MHz / 1MHz PRECISION LCR METER;
| 型号： | LCR-8000G |
| 厂家： | 
GWINSTEK |
| 描述： | 10MHz / 5MHz / 1MHz PRECISION LCR METER |
| 文件： | 总2页 (文件大小：703K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
10MHz / 5MHz / 1MHz PRECISION LCR METER
LCR-8000G Series
FEATURES
Wide Test Frequency 20Hz~10/5/1MHz
0.1% Basic Accuracy & 6 Digits
Measurement Resolution
Large LCD Display with Intuitive User
Interface
Full Measuring Functions with DUT V/I
Monitor
PASS/FAIL Function ( abs , % ,
with Judgment Alarm
)
The Smarter Way to Characterize Components
The LCR-8000G Series LCR meter, with test frequency up to 10MHz, provides accuracy, versatility and high
resolution for a wide range of component measurements, even including DC resistance measurement and
Voltage/Current monitoring. The Multi-Step function allows on-screen programming of customized
measurement sequence with Pass/Fail indication. Each program includes 30 test steps and each test step can be
set with selected parameters and test limits. Under Multi-Step operation, a tedious work routine can be done
step by step automatically just at a press of a button. With Graph Mode, LCR-8110G, LCR-8105G and LCR-8101G
display the component impedance response either over a wide range of test frequency sweep or over a wide
range of test voltage sweep in a graph chart. This gives an analysis result of either impedance vs. frequency or
impedance vs. applied voltage all at a glance. GPIB and RS-232C interfaces are available as standard for
instrument control and test result display on the PC. The rich features of LCR-8000G Series easily make your
measurement tasks done at a very competitive price.
Average 1 ~ 256 Times
DC Resistance Measurement
Multi Step Mode
Graph Mode
Standard RS-232C / GPIB Interface
Wide Frequency Range With Friendly
Intuitive User Interface
Graph Mode
The graph function shows the component
characteristics in visual manner. Either voltage sweep
or frequency sweep can be selected for horizontal
scale. Just select the parameter, and set the start/stop
The LCR-8000G Series is designed to perform precision
impedance measurements over a wide frequency range
of 20Hz ~ 10MHz for LCR-8110G, 20Hz ~ 5MHz for
LCR-8105G and 20Hz ~1MHz for LCR-8101G. The
instrument is capable of measuring 11 different
parameters with 0.1% basic accuracy, which meets the
precision measurement requirements of components
and modules used in the RF circuits. The large LCD
display with single-layer operation menu of LCR-8000G
Series provides users with ultimate convenience to
plug and play without much learning time.
Cvo.ltage or the start/stop frequency of the sweep, LCR
-8000G will run through the sequence of
measurements and show the results on a graph.
This graphical parameter measurement performs the
characteristic verification of components and
materials over the response to the changes in AC test
frequency or AC test voltage without the need of
complex programming of an external controller. When
the graph gets out of the vertical range, the LCR-
8000G Series can automatically adjust the scale to
get full test information. On the graph the marker
operation is available for detailed observation.
Multi Step Mode
Pass/fail Function With Judgment Alarm
The Multi-Step mode is capable of running a series of
measurements of a component at a number of user-
defined steps in sequence automatically. Total 64
programs can be saved into the non-volatile memory,
and each program contains up to 30 test steps. The
parameter and Hi/Lo limits can be set respectively for
each test step. After a program being properly edited,
the instrument can run through all the measurement
steps either at a press of the button under the Manual
Trigger selection, or automatically run the program by
detecting the connection of a DUT under the Auto
Trigger selection. When all the test steps are
In the Pass/Fail test, primary parameter measurement
result is compared with user-defined limits and the
pass or fail result is then displayed. Three methods,
including absolute limit, percentage and delta limit,
are available for Hi(high) and Lo(low) limit setting
based on the nominal test value. The Pass/Fail test
checks whether the parameter measurement result
sits within the limits, then display "PASS" for within
the limits, or "LO" for lower than the low limit, or
"HI" For higher than the high limit. A scale and bar
for displaying measurement result is shown at the
center of the screen to give a graphical identification,
which greatly reduces operator's load in a long time
inspection work. This scale and bar also facilitate the
adjustment of the variable components. Either Pass
or Fail result can be set with a buzzer alarm, which
makes component or material sorting easy with
sound identification.
APPLICATIONS
Education Lab and Training Institution
Research & Design
Quality Assurance Verification
completed, the screen shows the measurement
reading of the parameter being selected for each step
with Pass, HI, or LO measurement result.
C.
LCR-8000G Series
Simply Reliable
SPECIFICATIONS
TEST FREQUENCY
INPUT IMPEDANCE
BASIC ACCURACY
TEST SPEED
20Hz ~ 10MHz/5MHz/1MHz, 5 Digits, 0.005%
100Ω
0.1% (R, Z, X, G, Y, B, L, C)
AC (>2kHz) - MAX: 75mS, FAST: 150mS, MEDIUM: 450mS, SLOW: 600mS
DC - MAX: 30mS, FAST: 60mS, MEDIUM: 120mS, SLOW: 900mS
TEST SIGNAL LEVELS
Test Frequency
<_
Test Signal Level (rms)
10mV ~ 2V
10mV ~ 1V
Step
1mV/10mV
1mV/10mV
Accuracy
2% 5mV
2% 5mV
3MHz
> 3MHz
Max. 20mA
SHORT CIRCUIT CURRENT
MEASUREMENT RANGES
Mode
R, Z, X,
Rdc
G, Y, B
L
Measure Range
0.1mΩ ~ 100MΩ
0.01mΩ ~ 100MΩ
10nS ~ 1000S
0.1nH ~ 100kH
0.01pF ~ 1F
C
D
Q
0.00001 ~ 9.9999
0.1 ~ 9999.9
-180 ~ +180
Impedance (Z), Phase Angle ( ), Inductance (L), Capacitance (C), AC Resistance (Rac), Quality Factor (Q),
Dissipation Factor (D), Admittance (Y), Conductance (G), Reactance (X), Susceptance (B), DC Resistance (Rdc)
MEASUREMENT PARAMETERS
C + R, C + D, C + Q, L + R, L + Q, L + D
X + R, X + D, X + Q
SERIES OR PARALLEL EQUIVALENT CIRCUIT
SERIES EQUIVALENT CIRCUIT ONLY
PARALLEL EQUIVALENT CIRCUIT ONLY
POLAR FORM
C + G, B + G, B + D, B + Q, B + R, L + G
Z + Phase Angle, Y + Phase Angle
1 ~256 times
AVERAGE
320 x 240 DOT-MATRIX
LCD DISPLAY
INTERFACE
RS-232C, GPIB
POWER SOURCE
AC 115V (+10%/-25%), AC 230V (+15% / -14%)(Selectable), 50/60Hz
330(W) x 170(H) x 340(D)mm, Approx. 5kg
DIMENSIONS & WEIGHT
Note : Basic accuracy varies with the temperture, frequency, AC signal level and impedance of the device under test.
Specifications subject to change without notice.
CR-8000GGD3DH
ACCESSORIES
User manual x 1 , Power cord x 1 , Test lead LCR-12 x 1
ORDERING INFORMATION
LCR-8110G 10 MHz Precision LCR Meter
LCR-8105G 5 MHz Precision LCR Meter
LCR-8101G 1 MHz Precision LCR Meter
OPTION
Opt. 01 GTL-251
Opt. 02 DC Bias Box (up to 200V)
GPIB-USB-HS(High Speed)
FREE DOWNLOAD
PC Software
LCR. Exe.
OPTIONAL ACCESSORIES SELECTION GUIDE
LCR-8110G
ACCESSORY MODEL
LCR-05
BRIEF DESCRIPTION
LCR-8105G
LCR-8101G
Test Fixture for axial & radial lead components
Test Lead with Kelvin clip (4 wire type)
Test Lead with Alligator clip (2 wire type)
Test Fixture (Tweezers) for SMD/Chip components
Test Fixture for SMD/Chip components
Test Lead with Kelvin clip (4 wire type)
LCR-06B
LCR-07
LCR-08
LCR-09
LCR-12
LCR-13
Test Fixture for SMD/Chip components
RS-232C Cable
GTL-234
GRA-404
Note：" " means the accessories work with a frequency limitation (under 1MHz)
Rack Adapter Panel (19", 4U)
LCR-05
LCR-06B
LCR-07
LCR-08
LCR-09
LCR-13
LCR-12
DC BIAS BOX
Global Headquarters
U.S.A. Subsidiary
GOOD WILL INSTRUMENT CO., LTD.
No.7-1, Jhongsing Road, Tucheng Dist., New Taipei City 236, Taiwan
T +886-2-2268-0389 F +886-2-2268-0639
INSTEK AMERICA CORP.
5198 Brooks Street Montclair, CA 91763, U.S.A.
T +1-909-399-3535 F +1-909-399-0819
E-mail: sales@instekamerica.com
E-mail: marketing@goodwill.com.tw
China Subsidiary
Japan Subsidiary
GOOD WILL INSTRUMENT (SUZHOU) CO., LTD.
No. 521, Zhujiang Road, Snd, Suzhou Jiangsu 215011 China
TEXIO TECHNOLOGY CORPORATION.
7F Towa Fudosan Shin Yokohama Bldg., 2-18-13 Shin
Yokohama, Kohoku-ku, Yokohama, Kanagawa,
222-0033 Japan
T +81-45-620-2305 F +81-45-534-7181
E-mail: info@texio.co.jp
T +86-512-6661-7177 F +86-512-6661-7277
E-mail: marketing@instek.com.cn
Simply Reliable
Malaysia Subsidiary
GOOD WILL INSTRUMENT (SEA) SDN. BHD.
No. 1-3-18, Elit Avenue, Jalan Mayang Pasir 3,
11950 Bayan Baru, Penang, Malaysia
T +604-6111122 F +604-6115225
Korea Subsidiary
GOOD WILL INSTRUMENT KOREA CO., LTD.
Room No.503, Gyeonginro 775 (Mullae-Dong 3Ga,
Ace Hightech-City B/D 1Dong), Yeongduengpo-Gu,
Seoul 150093, Korea.
E-mail: sales@goodwill.com.my
Europe Subsidiary
GOOD WILL INSTRUMENT EURO B.V.
De Run 5427A, 5504DG Veldhoven, THE NETHERLANDS
T +31(0)40-2557790 F +31(0)40-2541194
T +82-2-3439-2205 F +82-2-3439-2207
E-mail : gwinstek@gwinstek.co.kr
www.gwinstek.com
www.facebook.com/GWInstek
相关型号：
©2020 ICPDF网 联系我们和版权申明