GSP-9330 [GWINSTEK]

3.25GHz SPECTRUM ANALYZER;


型号：	GSP-9330
厂家：	GWINSTEK
描述：	3.25GHz SPECTRUM ANALYZER
文件：	总4页 (文件大小：863K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

3.25GHz SPECTRUM ANALYZER

GSP-9330

LXI

TESTS MUST BE FAST!

GSP-9330, a high test speed spectrum analyzer with 3.25 GHz, provides the fastest 204 ms sweep speed. Users,

via high speed sweep time, can easily handle and analyze modulation signals. The keys to handling modulated signals

are fast sweep time and signal demodulation functions. In addition to the analog AM/FM demodulation and analysis

function, GSP-9330 also provides digital signal ASK/FSK, and 2FSK demodulation and analysis capabilities. Nowadays,

EMC issues are very crucial to product's design processes. Therefore, GSP-9330 has incorporated the EMC pretest

solution to facilitate EMC tests. The simple and easy EMC pretest procedures from GSP-9330 can tremendously

shorten users' product launch timebline.

For measuring signals, speed is one of the specifications to be considered. Perhaps, it is the most

important specification. GSP-9330 provides sweep speed up to 204 ms. Users, via high speed sweep

time, can easily capture transient signals such as frequency/amplitude modulation signals, Blue

tooth frequency hopping signals, tuned oscillator or other interfering signals under ISM Band.

Fastest Sweep Speed Up to 204 ms

The keys to handling modulated signals are fast sweep time and

signal demodulation function. In addition to the analog AM/FM

demodulation and analysis function, GSP-9330 also provides

ASK/FSK digital signal demodulation capability. For the widely-

utilized, low-cost and low power consumption 2FSK modulation

signals, GSP-9330 also provides the complete test and analysis

function to address the requirements.

Modulation Signal Analysis

and Processing

GSP-9330 can meet customers' EMC pretest requirements on the product development and

verification stages. Users can detect and resolve problems at the early product development stage

that can save time and money for product development and verification fee. As a result, users can

expedite the process of products launch. GSP-9330 has the built-in EMI dedicated 200/9k/120k/

1MHz filter, 20 dB low noise amplifier and Quasi-Peak/Average detection mode to conduct

radiation and conduction tests after collocating with the probe set. GKT-008, the radiation test

probe set, provides a complete near field test probe set to simplify the complex measurement

procedures and to simulate 3m/10m far field tests from the labs. Using GKT-008 can greatly save

engineers' debugging time and the money for going back and forth

EMC Pretest Solution

to the labs. GKT-008 can collocate with the Tracking Generator

function of GSP-9330 to conduct EMS pretests. For conduction

tests, GKT-008 can collocate with LISN and Isolated Transformer

to conduct electromagnetic conduction tests. If users concern

EUT's large voltage variation or complexity, applying a Transient

Limiter will make test equipment safer.

GSP-9330

Simply Reliable

FEATURES

MAIN FEATURES

FEATURES FOR PRODUCTION LINE APPLICATIONS

Frequency stability of 0.025 ppm allows GSP-9330 to be stable

quickly after powered up

Frequency Range : 9 kHz ~ 3.25 GHz

Fastest sweep speed up to 204 ms

Support modulation signal analysis

Users can set up automatic wake-up time to save time from

manually setting

2FSK digital signal analysis

The sequence function exempts users from writing programs

The limit line function determines whether the tested

signal passes the test

ASK/FSK digital signals demodulation and analysis

AM/FM analog signals demodulation and analysis

Complete EMC pretest solution

USER FRIENDLY DESIGN

EMI Detect mode: Quasi-Peak, Average

EMI Filter(-6dB): 200 Hz, 9 kHz, 120 kHz, 1MHz

Dedicated EMC function key

Built-in Definition Help

Status Icons

Support five languages (English, Simplified Chinese,

Traditional Chinese, Japanese, and Russian)

Speed save function

APPLICABLE TO TESTS AND ANALYSIS FOR VARIOUS

SIGNALS

Signal channel analysis provides Channel Power, OCBW,

ACPR, N-dB bandwidth, SEM

VARIOUS INTERFACE

Support USB Host, RS-232, LXI C (LAN Base),

GPIB (option)

CATV parameter tests focus on CNR, CSO, and CTB

parameters

Support USB Device, MicroSD to save files

Ideal for TV Output's DVI interface

Signal source's stability characteristics can be tested via

Phase Noise and Phase Jitter

SOFTWARE AND DRIVER

Component's or system's linearity test can be confirmed by

TOI and P1dB functions

SpectrumShot PC Software - EMC/Remote Control Mode

IVI Driver (It needs NI VISA)

Other measurement applications include Harmonic,

Frequency Counter, Time Domain Power, and Gated Sweep

Android App – GSP-9330 Remote Control

GRAPHIC PROCESSING OF SIGNAL MONITOR

VARIOUS AUGMENTING OPTIONS

Spectrogram traces changes of frequency and power vs.

time

Tracking Generator analyzes scalar network analysis and

P1dB point measurements

Topographic uses color shade to show the probability

distribution of signal appearance

Battery module and dedicated carrying case are ideal for

Open Site operations

Split-Window allows independent observation and settings

for spectrum with different frequency bandwidths

GKT-008 near field probe set conducts EMI Pretest

GLN-5040A/GIT-5060 conducts EMI Conduction tests

RELATED PRODUCTS INFORMATION :

GLA-5040A LISN

GKT-008 Near Field Probe

GIT-5060 Isolation Transformer

GPL-5010 Transient Limiter

CUSTOMERS

APPLICATIONS

Consumer Electronics

Service and Maintenance

Universities, Graduate Schools

Military Industries

For the Quick Check and Analysis of Spectral Characteristic

EMI Pre-compliance Testing

Analyze ASK, FSK, AM, FM Signal Characteristics

Monitor Satellite Uplink Signals From Satellite Uplink Truck

Test Systems That Require a Very Compact Instrument

Automotive Electronics

Telecom and communications Industries

Measure the Frequency Response of Cable, Attenuator,

Filter and Amplifier

Distributors for RF-Instruments Instrument leasing Companies

SPECIFICATIONS

FREQUENCY

Range

Resolution

9 kHz ~ 3.25 GHz

1 Hz

FREQUENCY REFERENCE

Accuracy

(period since last adꢀustment x aging rate) ꢁ stability over

temperature ꢁ supply voltage stability

1 ppm max.

0.025 ppm

Aging Rate

Frequency Stability Over Temperature

Supply Voltage Stability

1 year after last adꢀustment

0 ~ 50 °C

0.02 ppm

FREQUENCY READOUT ACCURACY

Start, Stop, Center, Marker

(marker frequency indication x frequency reference accuracy

ꢁ 10% x RBW ꢁ frequency resolution)

Max. 601 points, Min. 6 points

Trace Points

MARKER FREQUENCY COUNTER

Resolution

Accuracy

1 Hz, 10 Hz, 100 Hz, 1 kHz

(marker frequency indication X frequency reference accuracy RBW/Span >=0.02 ; Mkr level to DNL>30 dB

ꢁ counter resolution)

FREQUENCY SPAN

Range

Resolution

Accuracy

0 Hz (zero span), 100 Hz ~ 3.25 GHz

1 Hz

frequency resolution

RBW : Auto

PHASE NOISE

Offset from Carrier

10 kHz

100 kHz

Fc=1GHz;RBW=1kHz,VBW=10Hz;Average 40

< -88 dBc/Hz

< -95 dBc/Hz

< -113 dBc/Hz

Typical

1 MHz

RESOLUTION BANDWIDTH (RBW) FILTER

Filter Bandwidth

1 Hz ~ 1 MHz in 1-3-10 sequence

-3dB bandwidth

-6dB bandwidth

Nominal

200 Hz, 9 kHz, 120 kHz, 1MHz

8%, RBW = 1MHz ; 5%, RBW < 1MHz

<4.5 : 1

Accuracy

Shape Factor

Normal Bandwidth ratio: -60dB:-3dB

VIDEO BANDWIDTH (VBW) FILTER

Filter Bandwidth

1 Hz ~ 1 MHz in 1-3-10 sequence

-3dB bandwidth

AMPLITUDE

AMPLITUDE RANGE

Measurement Range

100 kHz ~ 1 MHz

1 MHz ~ 10 MHz

10 MHz ~ 3.25 GHz

Displayed Average Noise Level(DANL)to 18 dBm

DANL to 21 dBm

DANL to 30 dBm

ATTENUATOR

Input Attenuator Range

Auto or manual setup

0 ~ 50 dB, in 1 dB steps

MAXIMUM SAFE INPUT LEVEL

Average Total Power

DC Voltage

ꢁ33 dBm

50 V

Input attenuator 10 dB

1 dB GAIN COMPRESSION

Total Power at 1st Mixer

Total Power at the Preamp

> 0 dBm

> -22 dBm

Typical ; Fc 50 MHz; preamp. off

Typical ; Fc 50 MHz; preamp. on

Mixer power level (dBm) = input power (dBm) attenuation (dB)

DISPLAYED AVERAGE NOISE LEVEL (DANL)

Preamp off

0 dB attenuation; RF Input is terminated with a 50W load. RBW 10 Hz; VBW 10 Hz; span 500 Hz; reference level = - 60 dBm;

trace average 40

9 kHz~100 kHz

100 kHz~1 MHz

1 MHz~10 MHz

2.7 ~ 3.25 GHz

< -93 dBm

Nominal

< -90 dBm - 3 x (f/100 kHz) dB

< -122 dBm

< -116 dBm

Preamp on

0 dB attenuation; RF Input is terminated with a 50W load. RBW 10 Hz; VBW 10 Hz; span 500 Hz; reference level = - 60 dBm;

trace average 40

100 kHz~1 MHz

1 MHz~10 MHz

10 MHz~3.25 GHz

< -108 dBm - 3 x (f/100 kHz) dB

< -142 dBm

< -142 dBm ꢁ 3 x (f/1 GHz) dB

Nominal

LEVEL DISPLAY RANGE

Log, Linear

dBm, dBmV, dBuV, V, W

0.01 dB

0.01 % of reference level

Trace, Topographic, Spectrogram

Scales

Units

Marker Level Readout

Log scale

Linear scale

Single/Split Windows

Level Display Modes

Number of Traces

Detector

Trace Functions

Positive-peak,negative-peak,sample,normal,RMS(not Video),

Quasi-Peak(EMI),Average(EMI),Clear & Write,Max/Min Hold,

View, Blank, Average

ABSOLUTE AMPLITUDE ACCURACY

Absolute Point

Center=160 MHz ; RBW 10 kHz; VBW 1 kHz; span 100 kHz; log scale; 1 dB/div; peak detector; 23°C 1°C; Signal at Reference Level

0.3 dB

0.4 dB

Ref level 0 dBm; 10 dB RF attenuation

Ref level 0 dBm; -30 dB RF attenuation

Preamp Off

Preamp On

FREQUENCY RESPONSE

Preamp Off

Attenuation : 10 dB; Reference: 160 MHz; 20 ~ 30°C

0.5 dB

0.ꢂ dB

Attenuation: 0 dB; Reference: 160 MHz; 20 ~ 30°C

100 kHz ~ 2.0 GHz

2GHz ~ 3.25 GHz

Preamp On

0.6 dB

0.8 dB

1 MHz ~ 2 GHz

2 GHz ~ 3.25 GHz

ATTENUATION SWITCHING UNCERTAINTY

Attenuator Setting

Uncertainty

0 ~ 50 dB in 1 dB step

0.25 dB

Reference : 160 MHz, 10dB attenuation

Reference : 10 kHz RBW

RBW FILTER SWITCHING UNCERTAINTY

1 Hz ~ 1 MHz

0.25 dB

1.5 dB

LEVEL MEASUREMENT UNCERTAINTY

20 ~ 30°C; frequency > 1 MHz; Signal input 0 ~ -50 dBm;

Reference level 0 ~ -50 dBm; Input attenuation 10 dB;

RBW 1 kHz; VBW 1 kHz; after cal; Preamp Off

Typical

Overall Amplitude Accuracy

0.5 dB

SPURIOUS RESPONSE

Second Harmonic Intercept

Preamp off; signal input -30dBm; 0 dB attenuation

Typical; 10 MHz < fc < ꢂꢂ5 MHz

ꢁ35 dBm

ꢁ60 dBm

Typical; ꢂꢂ5 MHz ≤ fc < 1.625 GHz

Third-order Intercept

Preamp off; signal input -30dBm; 0 dB attenuation

300 MHz ~ 3.25 GHz

Input signal level -30 dBm, Att. Mode, Att=0dB; 20-30ºC

> 1dBm

< -60 dBc

<-90 dBm

Input Related Spurious

Residual Response (Inherent)

Input terminated; 0 dB attenuation; Preamp off

SPECIFICATIONS

SWEEP

SWEEP TIME

Range

204 ms ~ 1000 s

50 s ~ 1000 s

Continuous; Single

Free run; Video; External

Positive or negative edge

Span > 0 Hz

Span = 0 Hz; Min resolution=10

Sweep Mode

Trigger Source

Trigger Slope

RF PREAMPLIFIER

Frequency Range

Gain

1 MHz ~ 3.25 GHz

18 dB

Nominal (installed as standard)

FRONT PANEL INPUT/OUTPUT

RF INPUT

Connector Type

Impedance

VSWR

N-type female

<1.6 :1

Nominal

300 kHz ~ 3.25 GHz ; Input attenuator 10 dB

POWER FOR OPTION

Connector Type

Voltage/Current

SMB male

DC ꢁꢂV/500 mA max

With short-circuit protection

USB HOST

Connector Type

Protocol

A plug

Version 2.0

Support Full/High/Low speed

Up to 32GB capacity

MICRO SD SOCKET

SD 1.1

Micro SD, Micro SDHC

Protocol

Support Cards

REAR PANEL INPUT/OUTPUT

REFERENCE OUTPUT

Connector Type

Output Frequency

Output Amplitude

Output Impedance

BNC female

10 MHz

3.3V CMOS

Nominal

REFERENCE INPUT

Connector Type

BNC female

10 MHz

-5 dBm ~ ꢁ10 dBm

Within 5 ppm of the input reference frequency

Input Reference Frequency

Input Amplitude

Frequency Lock Range

ALARM OUTPUT

Connector Type

BNC female

Open-collector

TRIGGER INPUT/GATED SWEEP INPUT

Connector Type

Input Amplitude

Switch

BNC female

3.3V CMOS

Auto selection by function

LAN TCP/IP INTERFACE

Connector Type

Base

RJ-45

10Base-T; 100Base-Tx; Auto-MDIX

USB DEVICE

Connector Type

Protocol

B plug

Version 2.0

For remote control only; supports USB TMC

Supports Full/High/Low speed

IF OUTPUT

Connector Type

Impedance

IF Frequency

SMA female

886 MHz

Nominal

10 dB attenuation; RF input : 0 dBm @ 1 GHz

Output Level

-25 dBm

EARPHONE OUTPUT

Connector Type

3.5mm stereo ꢀack, wired for mono operation

VIDEO OUTPUT

Connector Type

DVI-I (integrated analog and digital), Single Link. Compatible with VGA or HDMI standard through adapter

RS-232C INTERFACE

Connector Type

Tx , Rx , RTS , CTS

D-sub 9-pin female

GPIB INTERFACE (OPTIONAL)

Connector Type

IEEE-488 bus connector

AC 100 V ~ 240 V, 50/60 Hz

AC POWER INPUT

Power Source

Auto range selection

BATTERY PACK (OPTIONAL)

Battery Pack

Voltage

Capacity

6 cells, Li-Ion rechargeable, 3S2P

DC 10.8 V

5200 mAh/56Wh

With UN38.3 Certification

GENERAL

Internal Data Storage

Power Consumption

Warm-up Time

16 MB nominal

< 65 W

< 30 minutes

ꢁ5 °C ~ ꢁ 45 °C

Temperature Range

Operating

Storage

Inc. all options (Basic ꢁ TG ꢁ GPIB ꢁ Battery)

-20 °C ~ ꢁ ꢂ0 °C

350(W) x 210(H) x 100(D) mm, Approx. 4.5kg

13.8(W) x 8.3(H) x 3.9(D) inch, Approx. 9.9lb

Dimensions & Weight

TRACKING GENERATOR (OPTIONAL)

Frequency Range

Output Power

Connector Type

Output VSWR

100 kHz ~ 3.25 GHz

-50 dBm ~ 0 dBm in 0.5 dB steps

N-type female

50 Nominal

300 kHz ~ 3 GHz, source attenuation 12 dB

< 1.6 : 1

Note : The specifications apply when the GSP-9330 is powered on for at least 30 minutes

to warm-up to a temperature of 20 ℃ to 30 ℃, unless specified otherwise.

Specifications subꢀect to change without notice.

GSP-9330GD1DH

OPTIONS

ORDERING INFORMATION

Opt.01 Tracking Generator

Opt.02 Battery Pack

Opt.03 GPIB Interface

GSP-9330

3.25 GHz Spectrum Analyzer

EMC Pretest Solution : GKT-008

EMI Near Field Probe Set

Line Impedance Stabilization Network

Isolation transformer

OPTIONAL ACCESSORIES

GLN-5040A

GIT-5060

GPL-5010

GSC-009

GRA-415

Soft Carrying Case

Rack Adapter Panel

Transient Limiter

FREE DOWNLOAD

SpectrumShot PC Software for Windows System (available on GW Instek website)

IVI Driver Supports LabVIEW/LabWindows/CVI Programming (available on NI website)

ACCESSORIES :

Power Cord, Certificate of Calibration, CD-ROM (with Quick Start Guide, User Manual,

Programming Manual, SpectrumShot Software, SpectrumShot Guide & IVI Driver)

Global Headquarters

U.S.A. Subsidiary

GOOD WILL INSTRUMENT CO., LTD.

T ꢁ886-2-2268-0389 F ꢁ886-2-2268-0639

INSTEK AMERICA CORP.

T ꢁ1-909-399-3535 F ꢁ1-909-399-0819

China Subsidiary

Simply Reliable

Japan Subsidiary

GOOD WILL INSTRUMENT (SUZHOU) CO., LTD.

T ꢁ86-512-6661-ꢂ1ꢂꢂ F ꢁ86-512-6661-ꢂ2ꢂꢂ

TEXIO TECHNOLOGY CORPORATION.

T ꢁ81-45-620-2305 F ꢁ81-45-534-ꢂ181

Malaysia Subsidiary

GOOD WILL INSTRUMENT (M) SDN. BHD.

T ꢁ604-6111122 F ꢁ604-6115225

Korea Subsidiary

GOOD WILL INSTRUMENT KOREA CO., LTD.

T ꢁ82-2-3439-2205 F ꢁ82-2-3439-220ꢂ

Europe Subsidiary

GOOD WILL INSTRUMENT EURO B.V.

T ꢁ31(0)40-255ꢂꢂ90 F ꢁ31(0)40-2541194

www.gwinstek.com

www.facebook.com/GWInstek

GSP-9330 [GWINSTEK]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E