GR6953JG

更新时间:2024-09-18 22:16:26
品牌:GRENERGY
描述:Self-oscillating Half-bridge Power IC

GR6953JG 概述

Self-oscillating Half-bridge Power IC

GR6953JG 数据手册

通过下载GR6953JG数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。

PDF下载
GR6953  
Self-oscillating Half-bridge Power IC  
Features  
Description  
Integrated half-bridge 440V power MOSFET  
GR6953 is a high voltage monolithic IC with  
integrated 440V half-bridge power MOSFET.  
Proprietary HVIC and latch immune CMOS  
technologies enable ruggedized monolithic  
Floating channel designed for bootstrap  
operation  
Noise immunity of transient voltage  
Under-voltage lockout  
construction. The front end features  
a
programmable oscillator which is similar to the 555  
timer. The output drivers feature a high pulse  
current buffer stage and an internal dead time  
designed for minimum driver cross-conduction.  
Propagation delays for the two channels are  
matched to simplify use in 50% duty cycle  
applications.  
Programmable oscillator frequency  
Matched propagation delay for both channels  
Ultra low startup current of 75uA  
Shutdown function turns off both channels  
Low side output in phase with RT  
Applications  
Compact fluorescent lamps (CFL)  
Cathode compact fluorescent lamp (CCFL)  
Ordering and Marking Information  
DIP-8  
Grenergy OPTO Inc. reserves the right to make changes to improve reliability or manufacture ability without  
notice, and advise customers to obtain the latest version of relevant information to verify before placing  
orders.  
2010.03 Ver. 1.0 Copyright Grenergy OPTO, Inc. www.grenergy-ic.com  
1
GR6953  
Pin Configuration  
TOP VIEW  
1
2
3
4
8
VB  
VCC  
RT  
7
6
5
HV  
CT  
VS  
SGND  
PGND  
Pin Description  
Pin No.  
Name  
VCC  
RT  
Function  
1
2
Low side and logic fixed supply  
Oscillator timing resistor input, in phase with HO for normal IC operation  
Oscillator timing capacitor input, the oscillator frequency according to the following  
equation: f = 0.7213 / (RT x CT)  
3
CT  
4
5
6
7
8
SGND  
PGND  
VS  
Signal ground  
Low side MOSFET source  
High side floating supply return and power output  
High side MOSFET drain  
HV  
VB  
High side floating supply  
Block Diagram  
2010.03 Ver. 1.0 Copyright Grenergy OPTO, Inc. www.grenergy-ic.com  
2
GR6953  
Absolute Maximum Ratings  
Supply voltage VCC ------------------------------------------------------------------------------------------------------------ 19V  
VB ------------------------------------------------------------------------------------------------------------------- 0.3V ~ 440V  
VS ------------------------------------------------------------------------------------------------------- VB-25V ~ VB+0.3V  
HV -------------------------------------------------------------------------------------------------------- VS-0.3V ~ VB+0.3V  
RT, CT ------------------------------------------------------------------------------------------------  
0.3V ~ VCC+0.3V  
Junction temperature ---------------------------------------------------------------------------------------------------- 150  
Operating ambient temperature --------------------------------------------------------------------------  
Storage temperature range -------------------------------------------------------------------------------  
20  
65  
~ 85  
~ 150  
DIP-8 package thermal resistance ------------------------------------------------------------------------------- 100 /W  
Power dissipation (DIP-8, at ambient temperature = 85 -------------------------------------------------- 650mW  
)
Lead temperature (All Pb free packages, soldering, 10sec) --------------------------------------------------- 260  
ESD voltage protection, human body model -------------------------------------------------------------------------- 2KV  
ESD voltage protection, machine model ------------------------------------------------------------------------------- 200V  
Recommended Operating Conditions  
Item  
Min.  
10  
Max.  
18  
Unit  
V
Supply voltage VCC  
Supply voltage VBS  
Supply voltage HV  
CFL (Input power)  
VCC-0.7  
18  
V
400  
23  
V
W
2010.03 Ver. 1.0 Copyright Grenergy OPTO, Inc. www.grenergy-ic.com  
3
GR6953  
Electrical Characteristics  
(VCC = 12V, HV = 12V, Cboot = 0.1uF, CL = 1nF, CT = 1nF, Dboot is a ultra fast diode, and Ta = 25°C, unless otherwise  
specified. The VIN, VTH and IIN parameters are referenced to SGND = PGND = 0V)  
Parameter  
Conditions  
Symbol  
Min.  
Typ.  
Max.  
Unit  
LOW VOLTAGE SUPPLY CHARACTERISTICS  
Rising VCC under-voltage lockout  
threshold  
VCCUV+  
VCCUV-  
VCCUVH  
IQCCUV  
8.1  
7.2  
0.5  
9.0  
8.0  
1.0  
50  
9.9  
8.8  
1.5  
100  
V
V
Falling VCC under-voltage lockout  
threshold  
VCC under-voltage lockout  
Hysteresis  
V
Micropower startup VCC supply  
µA  
VCC  
VCCUV  
current  
Quiescent VCC supply current  
VCC operating voltage  
IQCC  
Vop  
160  
12  
300  
18  
µA  
V
10  
OSCILLATOR I/O CHARACTERISTICS  
RT = 36k  
19.4  
94  
48  
20  
100  
50  
20.6  
106  
52  
kHz  
kHz  
%
Oscillator frequency (CT=1nF)  
fosc  
RT = 7.2k  
fosc<100kHz  
RT pin duty cycle  
d
CT pin current  
ICT  
0.001  
0.30  
8.0  
4.0  
4.1  
10  
1.0  
0.5  
uA  
UV-mode CT pin pulldown current  
Upper CT ramp voltage threshold  
Lower CT ramp voltage threshold  
CT voltage shutdown threshold  
High-level RT output voltage, VCC  
- VRT  
VCC = 7V  
ICTUV  
VCT+  
VCT-  
VCTSD  
0.25  
mA  
V
V
4.0  
4.2  
50  
V
IRT = 100uA  
IRT = 1mA  
IRT = 100uA  
IRT = 1mA  
mV  
mV  
mV  
mV  
mV  
mV  
mV  
mV  
mV  
VRT+  
100  
10  
300  
50  
Low-level RT output voltage  
VRT-  
100  
0
300  
100  
UV-mode RT output voltage  
VRTUV  
VCC  
IRT = 100uA  
SD-Mode RT output voltage, VCC - VCT = 0V  
VCCUV  
10  
50  
VRTSD  
VRT  
IRT = 1mA  
VCT = 0V  
100  
300  
2010.03 Ver. 1.0 Copyright Grenergy OPTO, Inc. www.grenergy-ic.com  
4
GR6953  
Electrical Characteristics (Cont.)  
BUILT-IN MOSFET CHARACTERISTICS  
Parameter  
Conditions  
Symbol  
Min.  
Typ.  
Max.  
Unit  
Drain – source break down voltage VGS = 0V, ID =250uA  
BVDSS  
ID  
440  
V
A
Peak drain current @ VGS=10V  
Drain - source on state resistance  
Ta = 25  
1.5  
3.5  
VGS =10V, ID=0.2A  
VDS = 400V, VGS = 0V,  
Tj = 25 oC  
Rds(on)  
3.0  
25  
250  
4
Drain – source leakage current  
IDSS  
uA  
VDS = 400V, VGS = 0V,  
Tj = 125oC  
VDS = VGS,  
ID = 250uA  
Gate threshold voltage  
Diode forward voltage  
VTH  
2
3
V
V
VDS = 0V,  
VSD  
1.0  
ID = 0.3A  
Input / Output Timing Diagram  
fosc = 0.7213 / (RT x CT) (kHz)  
2010.03 Ver. 1.0 Copyright Grenergy OPTO, Inc. www.grenergy-ic.com  
5
GR6953  
Typical Performance Characteristics  
1.4  
1.2  
0.9  
0.6  
0.3  
0.1  
120 125  
-40  
0
40  
80  
Temperature (C)  
Fig.3  
Quiescent VCC supply currentvs. Temperature  
2.5  
2
I
D=0.2A  
V
GS=10V  
1.5  
1
0.5  
0
25  
45  
65  
105  
125 135  
Temperature (°C)  
Fig. 5 Rds(on) vs. Temperature  
2010.03 Ver. 1.0 Copyright Grenergy OPTO, Inc. www.grenergy-ic.com  
6
GR6953  
Typical Application Circuit (220~240Vac 23W CFL)  
2010.03 Ver. 1.0 Copyright Grenergy OPTO, Inc. www.grenergy-ic.com  
7
GR6953  
Package Information  
DIP-8  
SYMBOL  
MILLIMETERS  
INCHES  
MIN.  
MAX.  
5.33  
MIN.  
MAX.  
0.210  
A
A1  
A2  
b
0.38  
2.92  
0.36  
1.14  
0.20  
9.01  
0.13  
7.62  
6.10  
0.015  
0.115  
0.014  
0.045  
0.008  
0.355  
0.005  
0.300  
0.240  
4.95  
0.56  
1.78  
0.35  
10.16  
0.195  
0.022  
0.070  
0.014  
0.400  
b2  
c
D
D1  
E
8.26  
7.11  
0.325  
0.280  
E1  
e
2.54 BSC  
7.62 BSC  
0.100 BSC  
0.300 BSC  
eA  
eB  
L
10.92  
3.81  
0.430  
0.150  
2.92  
0.115  
Note : 1. Followed from JEDEC MS-001 BA  
2. Dimension D, D1 and E1 do not include mold flash or protrusions. Mold flash or protrusions shall not exceed 10  
mil.  
________________________________________________________________________  
Grenergy OPTO, Inc. reserves the right to make corrections, modifications, enhancements, improvements, and other changes  
to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the  
latest relevant information before placing orders and should verify that such information is current and complete.  
2010.03 Ver. 1.0 Copyright Grenergy OPTO, Inc. www.grenergy-ic.com  
8

GR6953JG 相关器件

型号 制造商 描述 价格 文档
GR70221X0E102KA01D MURATA Chip Monolithic Ceramic Capacitors 获取价格
GR70221X0ER50KA01D MURATA Chip Monolithic Ceramic Capacitors 获取价格
GR70221X0ER50WA01D MURATA Chip Monolithic Ceramic Capacitors 获取价格
GR70221X0ER50WE01L MURATA Chip Monolithic Ceramic Capacitors 获取价格
GR70221X0GR50 MURATA Chip Monolithic Ceramic Capacitors 获取价格
GR70221X1H102KA01D MURATA Chip Monolithic Ceramic Capacitors 获取价格
GR70221X1HR50KA01D MURATA Chip Monolithic Ceramic Capacitors 获取价格
GR70221X1HR50WE01L MURATA Chip Monolithic Ceramic Capacitors 获取价格
GR70221XR50BE01L MURATA Chip Monolithic Ceramic Capacitors 获取价格
GR70222C1H102KA01D MURATA Chip Monolithic Ceramic Capacitors 获取价格

GR6953JG 相关文章

  • Bourns 密封通孔金属陶瓷微调电位计产品选型手册(英文版)
    2024-09-20
    5
  • Bourns 精密环境传感器产品选型手册(英文版)
    2024-09-20
    8
  • Bourns POWrTher 负温度系数(NTC)热敏电阻手册 (英文版)
    2024-09-20
    8
  • Bourns GMOV 混合过压保护组件产品选型手册(英文版)
    2024-09-20
    6