GLS85LS1016C-M-I-1S-ED114 [GREENLIANT]
Industrial Temp SATA NANDrive;型号: | GLS85LS1016C-M-I-1S-ED114 |
厂家: | Greenliant |
描述: | Industrial Temp SATA NANDrive |
文件: | 总8页 (文件大小:159K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
GLS85LS1008C / 1016C / 1032C / 1064C / 1128C
Industrial Temp SATA NANDrive™ MX Series
Preliminary Factsheet 02.100
January 2020
Features
• Industry Standard SATA Host Interface
• Expanded Data Protection
–
–
–
–
–
SATA 1.5Gb/s, 3Gb/s and 6Gb/s
SATA Revision 3.2
ATA/ATAPI-8 compliant
Supports 48-bit address feature set
Native Command Queuing (NCQ)
up to 32 commands
–
Added data security through user-selectable
protection zones
–
Secure Erase (data sanitization)
• 20-Byte Serial Number
–
Factory pre-programmed 10-Byte unique ID
–
User-programmable 10-Byte ID
• Performance
• Supports SMART and TRIM Commands
• Robust Built-in ECC
• Thermal Throttling
–
Sequential data read: Up to 410 MByte/sec
–
Sequential data write: Up to 115 MByte/sec
(128KB transfer size tested in VDBench on Linux)
• NAND Configuration
• Power Management
–
2 bits per cell (3D MLC NAND)
–
–
–
3.3V and 1.0V power supply
Host initialized power management (HIPM)
Device initialized power management (DIPM)
• Endurance
–
Program/Erase (P/E) Cycles: 5K
• Operating Temperature Range
• Power Specifications
–
Industrial: -40°C to 85°C
–
Active mode:
• BGA package
128GB: Up to 2860mW
64GB: Up to 1980mW
32GB: Up to 1540mW
16GB: Up to 1200mW
8GB: Up to 1200mW
Idle / Standby mode: <355mW
DevSleep mode: <70mW
–
–
14.0 mm x 24.0 mm x 1.40 mm, 145-ball,
1.0 mm ball pitch, LBJE (8GB, 16GB, 32GB,
64GB)
14.0 mm x 24.0 mm x 1.95 mm, 145-ball,
1.0 mm ball pitch, FZJE (128GB)
–
–
• All Devices are RoHS Compliant
Product Description
The GLS85LS1008C / 1016C / 1032C / 1064C /
1128C Industrial Temperature SATA NANDrive™
devices (referred to as “SATA NANDrive” in this
factsheet) are fully integrated solid state drives. They
combine an advanced Greenliant NAND controller
and 8, 16, 32, 64 or 128 GBytes of NAND flash in a
multi-chip package. These products are ideal for
embedded and portable applications that require small
form factor and reliable data storage.
The integrated NAND flash controller with built-in
advanced
NAND
management
firmware
communicates with the host through the standard
SATA protocol. It does not require any additional or
proprietary software such as the Flash File System
(FFS) and Memory Technology Driver (MTD).
SATA NANDrive is pre-programmed with a 10-Byte
unique serial ID and has the option of programming
an additional 10-Byte serial ID for even greater
system security.
Serial ATA (SATA)-interface solid state mass storage
technology is widely used in industrial PCs, single
board computers, servers, networking appliances,
HMI and digital signage displays, test and
SATA NANDrive’s advanced NAND management
technology enhances data reliability and security,
improves endurance and accurately estimates the
remaining life of the NAND flash devices. This
innovative technology combines robust NAND
controller hardware error correction capabilities with
advanced wear-leveling algorithms and bad block
management to significantly extend the life of the
product.
measurement
instrumentation,
multi-functional
printers, robotics, video equipment and security
systems.
SATA NANDrive is a single device, solid state drive
(SSD) that provides the functionality and compatibility
of a complete SATA hard disk drive (HDD) in a 14 mm
x 24 mm BGA package for easy, space saving
mounting to a system motherboard. These products
surpass traditional storage in their small size, security,
reliability, ruggedness and low power consumption.
SATA NANDrive devices are offered in a 145-ball
BGA, 1 mm ball pitch package.
These specifications are subject to change without notice.
© 2020 Greenliant
01/03/2020
S71451-01
1
GLS FS0019 Rev. 00
GLS85LS1008C / 1016C / 1032C / 1064C / 1128C
Industrial Temp SATA NANDrive™ MX Series
Preliminary Factsheet 02.100
January 2020
1.0 GENERAL DESCRIPTION
Each SATA NANDrive contains an integrated SATA NAND flash memory controller and discrete NAND flash die
in a BGA package. Refer to Figure 2-1 for the SATA NANDrive block diagram.
1.1.5 Error Correction Code (ECC)
1.1 Optimized SATA NANDrive
The ECC technology uses advanced algorithms to
detect and correct errors, ensuring data integrity and
extending the SSD lifespan.
The heart of SATA NANDrive is the SATA NAND flash
memory controller which translates standard SATA
signals into flash media data and control signals. The
following components contribute to SATA NANDrive’s
operation.
1.1.6 Serial Communication Interface (SCI)
The Serial Communication Interface (SCI) is designed
for error reporting. During the product development
stage, it is recommended to provide the SCI port on
the PCB to aid in design validation.
1.1.1 Microcontroller Unit (MCU)
The MCU translates SATA commands into data and
control signals required for flash media operation.
1.1.7 Multi-tasking Interface
1.1.2 Internal Direct Memory Access (DMA)
The multi-tasking interface enables fast, sequential
write performance by allowing concurrent Read,
Program and Erase operations to multiple flash media.
SATA NANDrive uses internal DMA allowing instant
data transfer from/to buffer to/from flash media. This
implementation eliminates microcontroller overhead
associated with the traditional, firmware-based
approach, thereby increasing the data transfer rate.
1.2 SMT Reflow Consideration
Preprogrammed NAND devices have temperature
limits due to data retention. Using Greenliant’s
recommended reflow profile during production will
help prevent damage to the device and ensure better
retention of any preprogrammed data through the
surface-mount soldering process. See the relevant
datasheet section describing the recommended reflow
temperature limits.
1.1.3 Power Management Unit (PMU)
The PMU controls the power consumption of SATA
NANDrive. The PMU dramatically reduces the power
consumption of SATA NANDrive by putting the part of
the circuitry that is not in operation into sleep mode.
The Flash File System handles inadvertent power
interrupts and has auto-recovery capability to ensure
SATA NANDrive firmware integrity. For regular power
1.3 Advanced NAND Management
management,
the
host
must
send
a
SATA NANDrive’s integrated controller uses
advanced wear-leveling algorithms to substantially
increase the longevity of NAND flash media. Wear
caused by data writes is evenly distributed across all
or select blocks in the device to prevent “hot spots” in
locations that are programmed and erased extensively.
This effective wear-leveling technique results in
optimized device endurance, enhanced data retention
and higher reliability required by long-life applications.
STANDBY_IMMEDIATE (E0h), IDLE_IMMEDIATE
(E1h), STANDBY (E2h) or IDLE (E3h) command and
wait for the command-ready before powering down
SATA NANDrive.
1.1.4 Embedded Flash File System
The embedded flash file system is an integral part of
SATA NANDrive. It contains MCU firmware that
performs the following tasks:
1. Translates host side signals into flash media
writes and reads
2. Provides flash media wear leveling to spread
flash writes across all memory address space to
increase the longevity of flash media
3. Keeps track of the data file structure
4. Manages system security for the selected
protection zones
These specifications are subject to change without notice.
© 2020 Greenliant
01/03/2020
S71451-01
2
GLS FS0019 Rev. 00
GLS85LS1008C / 1016C / 1032C / 1064C / 1128C
Industrial Temp SATA NANDrive™ MX Series
Preliminary Factsheet 02.100
January 2020
2.0
FUNCTIONAL BLOCKS
Figure 2-1: SATA NANDrive Block Diagram
These specifications are subject to change without notice.
© 2020 Greenliant
01/03/2020
S71451-01
3
GLS FS0019 Rev. 00
GLS85LS1008C / 1016C / 1032C / 1064C / 1128C
Industrial Temp SATA NANDrive™ MX Series
Preliminary Factsheet 02.100
January 2020
2.0 APPENDIX
2.1 Product Ordering Information
GLS 85 LS 1 xxxC - M - C - xxJE - NDxxx
XX XX X XXXX - X - X - XXXX - XXXXX
Ordering Code 1)
NDxxx = NANDrive Revision
EDxxx = Evaluation Board Revision
Environmental Attribute
E = non-Pb solder (RoHS Compliant)
Package Modifier
BJ / ZJ = 145-ball positions
Package Type
L = LBGA
F = FBGA
Operating Temperature
I = Industrial: -40°C to +85°C
NAND Configuration
M = 2 bits per cell
Product Generation
C = Generation
Capacity
008 = 8 GByte
016 = 16 GByte
032 = 32 GByte
064 = 64 GByte
128 = 128 GByte
GByte Designator
1 = GByte
Interface
S = SATA
Voltage
L = 3.3V
Product Family
85 = NANDrive
1) Note that the top side marking on the package typically does not include ordering codes (e.g. NDxxx), unless it is a special C-SPEC
(custom specification) which is required by the end-customer to be marked on the device.
These specifications are subject to change without notice.
© 2020 Greenliant
01/03/2020
S71451-01
4
GLS FS0019 Rev. 00
GLS85LS1008C / 1016C / 1032C / 1064C / 1128C
Industrial Temp SATA NANDrive™ MX Series
Preliminary Factsheet 02.100
January 2020
Valid Combinations
Valid product combinations are those that are in the mass production, or will be in the mass production. Consult
your Greenliant sales representative to confirm availability of the valid combinations and to determine availability
of new product combinations.
Table 12-1: SATA NANDrive Product Valid Ordering Numbers
Capacity Operating Temperature
Part Number
Package
8GB
Industrial (-40°C to 85°C) GLS85LS1008C-M-I-LBJE-ND114
Industrial (-40°C to 85°C) GLS85LS1016C-M-I-LBJE-ND114
Industrial (-40°C to 85°C) GLS85LS1032C-M-I-LBJE-ND114
Industrial (-40°C to 85°C) GLS85LS1064C-M-I-LBJE-ND114
Industrial (-40°C to 85°C) GLS85LS1128C-M-I-FZJE-ND114
LBJE, 14x24x1.40mm
LBJE, 14x24x1.40mm
LBJE, 14x24x1.40mm
LBJE, 14x24x1.40mm
FZJE, 14x24x1.95mm
16GB
32GB
64GB
128GB
Table 12-2: SATA NANDrive Evaluation Board Valid Ordering Numbers
Capacity Operating Temperature Part Number
Form Factor
8GB
Industrial (-40°C to 85°C) GLS85LS1008C-M-I-1S-ED114
Industrial (-40°C to 85°C) GLS85LS1016C-M-I-1S-ED114
Industrial (-40°C to 85°C) GLS85LS1032C-M-I-1S-ED114
Industrial (-40°C to 85°C) GLS85LS1064C-M-I-1S-ED114
Industrial (-40°C to 85°C) GLS85LS1128C-M-I-1S-ED114
Module with SATA connector
Module with SATA connector
Module with SATA connector
Module with SATA connector
Module with SATA connector
16GB
32GB
64GB
128GB
These specifications are subject to change without notice.
© 2020 Greenliant
01/03/2020
S71451-01
5
GLS FS0019 Rev. 00
GLS85LS1008C / 1016C / 1032C / 1064C / 1128C
Industrial Temp SATA NANDrive™ MX Series
Preliminary Factsheet 02.100
January 2020
2.2
ackage Diagrams
P
TOP VIEW
11
10
9
8
7
6
5
4
3
2
1
14.0
+/- 0.1
A
B
C
D
E
F
G
H
J
K
L
M
N
P
R
T
U
V
W
Y
AA AB AC
24.0 ±0.1
A1
CORNER
BOTTOM VIEW
0.5 +/- 0.05
(145x)
14.0
3.0
1
2
3
4
5
6
1.0
8.0
7
8
9
10
11
1.0
A
B
C
D
E
F
G
H
J
K
L
M
N
P
R
T
U
V
W
Y
AA AB AC
SIDE VIEW
1mm
DETAIL
Note: All linear dimensions are in millimeters.
Untoleranced dimensions are nominal target values.
Coplanarity: 0.15 mm.
0.40 ±0.05
Ball opening size is 0.40 mm (± 0.05 mm).
1.25 ± 0.15
0.15
SEATING PLANE
Figure 12-2: SATA NANDrive 145-Ball, Ball Grid Array (BGA) Greenliant Package Code: LBJ
These specifications are subject to change without notice.
© 2020 Greenliant
01/03/2020
S71451-01
6
GLS FS0019 Rev. 00
GLS85LS1008C / 1016C / 1032C / 1064C / 1128C
Industrial Temp SATA NANDrive™ MX Series
Preliminary Factsheet 02.100
January 2020
TOP VIEW
11
10
9
8
7
6
5
4
3
2
1
14.0
+/- 0.1
A
B
C
D
E
F
G
H
J
K
L
M
N
P
R
T
U
V
W
Y
AA AB AC
24.0 ±0.1
A1
CORNER
BOTTOM VIEW
0.5 +/- 0.05
(145x)
14.0
3.0
1
2
3
4
5
6
1.0
8.0
7
8
9
10
11
1.0
A
B
C
D
E
F
G
H
J
K
L
M
N
P
R
T
U
V
W
Y
AA AB AC
SIDE VIEW
1mm
DETAIL
Note: All linear dimensions are in millimeters.
Untoleranced dimensions are nominal target values.
Coplanarity: 0.15 mm.
0.40 ±0.05
Ball opening size is 0.40 mm (± 0.05 mm).
1.80 ± 0.15
0.15
SEATING PLANE
Figure 12-2: SATA NANDrive 145-Ball, Ball Grid Array (BGA) Greenliant Package Code: FZJ
These specifications are subject to change without notice.
© 2020 Greenliant
01/03/2020
S71451-01
7
GLS FS0019 Rev. 00
GLS85LS1008C / 1016C / 1032C / 1064C / 1128C
Industrial Temp SATA NANDrive™ MX Series
Preliminary Factsheet 02.100
January 2020
Revision History
Revision
02.000
Description
Initial release as Preliminary Factsheet
Updated height of LBJE package
Date
December 06, 2019
January 03, 2020
02.100
© 2020 Greenliant. All rights reserved.
Greenliant and the Greenliant logo are registered trademarks, and NANDrive is a trademark of Greenliant. All
other trademarks and registered trademarks are the property of their respective owners.
Specifications are subject to change without notice. Memory sizes denote raw storage capacity; actual usable
capacity may be less.
Greenliant makes no warranty for the use of its products other than those expressly contained in the Greenliant
Terms and Conditions of Sale.
www.greenliant.com
These specifications are subject to change without notice.
© 2020 Greenliant
01/03/2020
S71451-01
8
GLS FS0019 Rev. 00
相关型号:
©2020 ICPDF网 联系我们和版权申明