61SS64-1-040 [GRAYHILL]
Rotary Position Encoder, Single, 2 Channels,;型号: | 61SS64-1-040 |
厂家: | GRAYHILL, INC |
描述: | Rotary Position Encoder, Single, 2 Channels, 编码器 光电 |
文件: | 总2页 (文件大小:233K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Optical Encoders
SERIES 61S
High Resolution, 5/8" Package
FEATURES
APPLICATIONS
• Compact,5/8"Package
• .125" or .250" Shaft Diameter
• 10MillionRotationalCycles
• Compatible with CMOS, TTL and
HCMOSLogic
• AudioMixingConsoles
• MedicalEquipment
• TestandMeasurementEquipment
• Available in 50 and 64
Quadrature Cycles per Revolution
• Choices of Cable Length and
Terminations
• Drop-InIndustryReplacement
DIMENSIONS In inches (and millimeters)
Pin Version: .125" Shaft
Cable Version: .125" Shaft
Pin Version: .250" Shaft
Cable Version: .250" Shaft
I-35
Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com
Optical Encoders
CIRCUITRY AND WAVEFORM Standard Quadrature 2-Bit Code
Rotational Torque: 1.5 in. oz. max.
Terminal Strength:5lbsterminalpull-out
force minimum (pinned version)
Environmental Ratings
Shaft: Stainless steel
Code Rotor:Chemicallyetchedstainlesssteel/
electroformed nickel
SPECIFICATIONS
ElectricalRatings
Operating Voltage:5.0±.25Vdc
Supply Current: 50 mA maximum at 5 Vdc
LogicOutputCharacteristics:
Output Type: 2-bit gray code with channel A
leading channel B by 90° ± 45°whentheshaft is
turned clockwise
PowerConsumption:250mWmaximum
Rise/Fall Times: (25"standardcableASM/
13.3 PF measurement probe)
RiseTime:1.0microsecondstypical
Fall Time: .440microsecondstypical
Mechanical Ratings
Mechanical Life: 10millionrevolutions
MountingTorque:20in-lbsmaximum
Operating Torque: 1.5in-ozmaximumShaft
Push Out Force: 50 lbs minimum
PrintedCircuitBoard:NEMAGradeFR-4.
Fivemicroinchesminimumgoldover100
microinchesminimumnickelovercopper
Backplate: Nylon(Hiloy610B)
Header: Phosphorbronze,200microinchestin
over50microinchesnickel(pinnedversion)
RetainingRingandThrustWashers:
Stainless steel
OperatingTemperatureRange:-40°Cto85°C
StorageTemperatureRange:-55°Cto100°C
Relative Humidity:90-95%at40°Cfor96hours
Vibration Resistance: Harmonic motion with
amplitude of 15g, within a varied 10 to 2000 Hz
frequencyfor12hoursperMIL-STD-202,Method
204
MechanicalShock:Test1:100gfor6mS,half-
sinewavewithvelocitychangeof12.3ft/s. Test
2: 100g for 6 mS, sawtooth wave with velocity
change of 9.7 ft/s.
Photo Sensor: Planarsilicon
Infrared Emitter: Gallium aluminum arsenide
Cable: 26 AWG, stranded/tinned wire, PVC
coatedon.100(2,54)centers(cabledversion)
Connector:
Housing: glass-filled polyester 94V-0,black
Terminals: 15 microinches gold in select area
over50microinchesminimum
Materials and Finishes
Bushing: Zincplatedbrass
Housing:Nylon(Hiloy610B)
ORDERING INFORMATION
Series
Style: S = unsealed, SS = sealed
Cycles: per channel per revolution = 50 or 64
61S128-2-025
Termination: Blank (no dash or numbers): pins as described in drawing.
Cable Termination: 020 = 2.0" minimum to 250 = 25" maximum. Provided in increments of 1/2".
Example: 035 = 3.5", 060 = 6". Cable is terminated with standard Molex part no. 14-56-3056.
Use any standard .100 center 5-pin header to interface with cable.
Shaft/Bushing: 1 = 0.125"shaftand0.250" bushing; 2 = 0.250" shaft and 0.375" bushing
Available from your local Grayhill Component Distributor. For prices and discounts, contact a local Sales Office, an authorized local
Distributor, or Grayhill.
to .040", when the switch is mounted. The
panelsealissiliconrubber.Theshaftsealisan
o-ring per MIL–P–5516B.
Part Number SHH694-11: 302-2Bstainless
steel, no plating
ACCESSORIES
Non-turn Washers
TheSeries61Sbushinghasanon-turnkeyway
topreventrotationoftheswitchbodywhenthe
panel is cut to fit. Another way to keep the
switchfromturningistouseanonturnwasher.
PartNumber50J1066:302-2Bstainlesssteel
Part number 12C1087-1:cadium-plated
Shaft and Panel Seal
OPTIONS
For shaft and panel seal version, the shaft is
sealed by an o-ring inside the bushing. The
panel is sealed by a flat gasket .045" thick at
the base of the bushing. The panel seals will
increasethebehindpaneldimensionby.020"
ContactGrayhillforcustomterminations,shaft
and bushing configurations, and resolutions.
Control knobs are also available.
DIMENSIONS In inches (and millimeters)
Part Number: 50J1066 (.125" shaft)
Part Number: SHH694-11 (.250" shaft)
Part Number: 12C1087-1 (.250" shaft)
Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com
I-36
相关型号:
©2020 ICPDF网 联系我们和版权申明