首页 |元器件品牌

P1A [GOOD-ARK]

Surface Mount Glass Passivated Standard Rectifier;
P1A
型号： P1A
厂家： GOOD-ARK ELECTRONICS    GOOD-ARK ELECTRONICS
描述：

Surface Mount Glass Passivated Standard Rectifier
文件： 总5页 (文件大小：384K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
P1A thru P7A  
Surface Mount Glass Passivated Standard Rectifier  
Reverse Voltage 50~1000V Forward Current 1A  
Features  
• Glass passivated Standard Rectifiers  
• Low profile, typical thickness 0.8mm  
• Low forward voltage drop  
• Low leakage current  
• Moisture sensitivity: level 1, per J-STD-020  
• Heatsink structure  
iSGA  
(SOD-123HS)  
• High temperature soldering guaranteed: 260℃/10 seconds  
Typical Applications  
For use of general purpose rectification in lighting, cellular phone, portable device, power supplie  
and other consumer applications.  
Maximum Ratings (TA = 25 °C unless otherwise noted)  
P1A P2A P3A P4A P5A P6A P7A Unit  
Parameter  
Symbol  
Maximum repetitive peak reverse voltage  
Maximum RMS voltage  
Maximum DC blocking voltage  
50  
35  
50  
100 200 400 600 800 1000  
70 140 280 420 560 700  
V
V
V
VRRM  
VRMS  
VDC  
100 200 400 600 800 1000  
1.0  
Maximum average forward rectified current  
A
IF(AV)  
Peak forward surge current 8.3 ms single half sine-  
wave superimposed on rated load  
40  
A
IFSM  
A2sec  
°C  
I2t  
TJ,  
7
Rating for fusing(t＜8.3ms)  
- 55 to + 150  
Operating junction and storage temperature range  
TSTG  
Electrical Characteristics (TA = 25 °C unless otherwise noted)  
P1A P2A P3A P4A P5A P6A P7A Unit  
Parameter  
Test Conditions  
Symbol  
400 1000  
VBR  
600  
Minimum Breakdown voltage  
Ta=25℃,IR=100uA  
Ta=25℃,IF=1.0A  
1.0  
Volts  
µA  
Maximum instantaneous forward  
voltage  
VF  
IR  
0.88  
5
Ta=125℃,IF=1.0A  
Ta=25℃  
Ta=125℃  
Maximum DC reverse current at  
rated DC blocking voltage  
50  
IF=0.5A,IR=1.0A,  
trr  
1.5  
uS  
pF  
Typical reverse recovery time  
Typical junction capacitance  
Irr=0.25A  
6.5  
63  
9
CJ  
4.0 V, 1 MHz  
1)  
juntion to ambient  
juntion to lead  
juntion to case  
RθJA  
1)  
℃/W  
Typical thermal resistance  
RθJL  
2)  
39  
RθJC  
Note:1),The thermal resistance from junction to ambient or lead, mounted on P.C.B with 5×5mm copper pads,2 OZ,FR4 PCB  
2),The thermal resistance from junction to case, mounted on P.C.B with recommended copper pads,2 OZ,FR4 PCB  
www.goodark.com  
1/5  
2016.03-Rev.A  
P1A thru P7A  
Surface Mount Glass Passivated Standard Rectifier  
Reverse Voltage 50~1000V Forward Current 1A  
Ratings and Characteristics Curves  
(TA = 25℃ unless otherwise noted)  
1.5  
40  
30  
20  
10  
0
Ta=25℃  
8.3ms single  
half sine-wave  
1.2  
0.9  
0.6  
0.3  
0
1
10  
100  
0
25 50 75 100 125 150  
Lead temperature（℃）  
Number of Cycles at 60Hz  
Figure 2.Maximum Non-Repetitive  
Peak Forward Surge Current  
Figure 1.Forward Current Derating Curve  
10000  
1000  
100  
100  
10  
1
25℃  
85℃  
125℃  
150℃  
Tj=25℃  
f=1.0MHZ  
Vsig=50mVp-p  
10  
1
0.1  
0.01  
0.001  
0 20 40 60 80 100 120  
Percent of Rated Peak Reverse Voltage (%)  
Figure 3. Typical Reverse Characteristics  
0.1  
1
10  
Reverse Voltage (V)  
Figure 4. Typical Junction Capacitance  
10  
25℃  
85℃  
125℃  
150℃  
1
0.1  
0.01  
0 0.3 0.6 0.9 1.2 1.5 1.8  
Instantaneous Forward Voltage (V)  
Figure 5. Typical Instantaneous Forward Characteristics  
www.goodark.com  
2/5  
2016.03-Rev.A  
P1A thru P7A  
Surface Mount Glass Passivated Standard Rectifier  
Reverse Voltage 50~1000V Forward Current 1A  
Package Outline Dimensions  
iSGA  
Package  
Unit:mm  
A
B
B1  
C
D
MIN  
0.75  
0.85  
0.85  
0.1  
MAX  
0.90  
1.05  
1.05  
0.25  
2.1  
1.9  
E
2.9  
3.1  
L1  
L2  
L3  
HE  
2.0  
0.4  
1.3  
3.5  
2.45  
0.85  
1.7  
3.9  
Soldering footprint  
Packing Information  
Packing quantities:  
Reel size  
7"  
Quantity/reel  
3K  
Quantity/inner Box  
30K  
Quantity/Carton  
120K  
Tape & Reel Specification  
www.goodark.com  
3/5  
2016.03-Rev.A  
P1A thru P7A  
Surface Mount Glass Passivated Standard Rectifier  
Reverse Voltage 50~1000V Forward Current 1A  
Disclaimers  
These materials are intended as a reference to assist our customers in the selection of the  
Suzhou Good-Ark product best suited to the customer’s application; they do not convey any  
license under any intellectual property rights, or any other rights, belonging to Suzhou Good-  
Ark Electronics Co., Ltd.or a third party.  
Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, or  
infringement of any third-party’s rights, originating in the use of any product data, diagrams,  
charts, programs, algorithms, or circuit application examples contained in these materials.  
All information contained in these materials, including product data, diagrams, charts,  
programs and algorithms represents information on products at the time of publication of these  
materials, and are subject to change by Suzhou Good-Ark Electronics Co., Ltd. without notice  
due to product improvements or other reasons. It is therefore recommended that customers  
contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized Suzhou Good-Ark Electronics  
Co., Ltd. for the latest product information before purchasing a product listed herein. The  
information described here may contain technical inaccuracies or typographical errors. Suzhou  
Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, liability, or other  
loss rising from these inaccuracies or errors. Please also pay attention to information  
published by Suzhou Good-Ark Electronics Co., Ltd. by various means, including our website  
home page.  
(http://www.goodark.com)  
When using any or all of the information contained in these materials, including product data,  
diagrams, charts, programs, and algorithms, Please be sure to evaluate all information as a  
total system before making a final decision on the applicability of the information and products.  
Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, liability or  
other loss resulting from the information contained herein.  
The prior written approval of Suzhou Good-Ark Electronics Co., Ltd. is necessary to reprint or  
reproduce in whole or in part these materials.  
Please contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized distributor for further  
details on these materials or the products contained herein.  
www.goodark.com  
4/5  
2016.03-Rev.A  
P1A thru P7A  
Surface Mount Glass Passivated Standard Rectifier  
Reverse Voltage 50~1000V Forward Current 1A  
es  
www.goodark.com  
5/5  
2016.03-Rev.A  

相关型号：

P1A105035KW0DE3

 CAPACITOR, TANTALUM, SOLID, POLARIZED, 35 V, 1 uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS COMPLIANT
VISHAY

P1A105035MV2D

 CAPACITOR, TANTALUM, SOLID, POLARIZED, 35V, 1uF, THROUGH HOLE MOUNT, RADIAL LEADED
VISHAY

P1A105035MW0D

 CAPACITOR, TANTALUM, SOLID, POLARIZED, 35V, 1uF, THROUGH HOLE MOUNT, RADIAL LEADED
VISHAY

P1A105035MW0DE3

 CAPACITOR, TANTALUM, SOLID, POLARIZED, 35 V, 1 uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS COMPLIANT
VISHAY

P1A154035K08DE3

 CAPACITOR, TANTALUM, SOLID, POLARIZED, 35 V, 0.15 uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS COMPLIANT
VISHAY

P1A154035M08DE3

 CAPACITOR, TANTALUM, SOLID, POLARIZED, 35 V, 0.15 uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS COMPLIANT
VISHAY

P1A154050KT0DE3

 CAPACITOR, TANTALUM, SOLID, POLARIZED, 50V, 0.15uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS COMPLIANT
VISHAY

P1A155025KC0DE3

 CAPACITOR, TANTALUM, SOLID, POLARIZED, 25V, 1.5uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS COMPLIANT
VISHAY

P1A155025MH0D

 CAPACITOR, TANTALUM, SOLID, POLARIZED, 25V, 1.5uF, THROUGH HOLE MOUNT, RADIAL LEADED
VISHAY

P1A155025MT0DE3

 CAPACITOR, TANTALUM, SOLID, POLARIZED, 25V, 1.5uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS COMPLIANT
VISHAY

P1A224035KT0DE3

 CAPACITOR, TANTALUM, SOLID, POLARIZED, 35V, 0.22uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS COMPLIANT
VISHAY

P1A224035KV0DE3

 CAPACITOR, TANTALUM, SOLID, POLARIZED, 35V, 0.22uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS COMPLIANT
VISHAY
©2020 ICPDF网 联系我们和版权申明