LB1201S [GOOD-ARK]
Bridge Rectifier Diode,;
| 型号： | LB1201S |
| 厂家： | 
GOOD-ARK ELECTRONICS |
| 描述： | Bridge Rectifier Diode, |
| 文件： | 总5页 (文件大小：599K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
LB1201S thru LB1210S
Low Profile Miniature Single Phase Surface Mount Bridge Rectifiers
Reverse Voltage 100~1000V Output Current 1.2A
Features
• Case:ABF
• Glass passivated Fast Recovery bridge rectifiers
• Ideal for automated placement
• Moisture sensitivity: level 1, per J-STD-020
• Solder dip 260 °C, 10 s
• Plastic package has Underwriters Laboratory Flammability
Classification 94V-0
• Halogen-free according to IEC 61249-2-21 definition
Typical Applications
For use of general purpose AC to DC bridge rectification in power supply，charger，office appliance，
home appliance and telecome device.
Maximum Ratings (TA = 25 °C unless otherwise noted)
LB1201S LB1202S LB1204S LB1206S LB1208S LB1210S
Unit
Parameter
Symbol
200
140
200
400
280
400
600
420
600
800
560
800
1000
700
V
V
V
A
Maximum repetitive peak reverse voltage
Maximum RMS voltage
VRRM
VRMS
VDC
100
70
1000
Maximum DC blocking voltage
100
1.2
50
Maximum average output rectified current
Io(AV)
Peak forward surge current 8.3 ms single half
sine-wave superimposed on rated load
A
IFSM
A2sec
°C
I2t
1.0
Rating for fusing(t<8.3ms)
Operating junction and storage temperature
range
- 55 to + 150
TJ, TSTG
Electrical Characteristics (TA = 25 °C unless otherwise noted)
LB1201S LB1202S LB1204S LB1206S LB1208S LB1210S
Unit
Parameter
Test Conditions Symbol
IF=1.2A
VF
Maximum instantaneous
forward voltage
1.1
Volts
TA=25℃
TA=25℃
Maximum DC reverse
current at rated DC
blocking voltage
Typical junction
capacitance
5.0
500
15
IR
µA
pF
TA=125℃
CJ
4.0 V, 1 MHz
Thermal Characteristics
LBR1201S LBR1202S LBR1204S LBR1206S LBR1208S LBR1210S
Unit
Parameter
Symbol
80
25
30
RθJA
RθJC
RθJL
Typical thermal resistance(1)
Notes:
℃/W
1. Mounted on FR-4 P.C.B Board
www.goodark.com
1/5
2016.03-Rev.B
LB1201S thru LB1210S
Low Profile Miniature Single Phase Surface Mount Bridge Rectifiers
Reverse Voltage 100~1000V Output Current 1.2A
Ratings and Characteristics Curves
(TA = 25℃ unless otherwise noted)
www.goodark.com
2/5
2016.03-Rev.B
LB1201S thru LB1210S
Low Profile Miniature Single Phase Surface Mount Bridge Rectifiers
Reverse Voltage 100~1000V Output Current 1.2A
Package Outline Dimensions
DIM
Unit: mm
MIN
Unit: inch
MIN
MAX
1.35
0.15
0.70
0.30
4.20
4.60
5.20
0.65
6.40
1.30
MAX
0.053
0.006
0.028
0.012
0.165
0.181
0.205
0.026
0.252
0.051
A
A1
B
C
D
E1
E2
L
HE
H
1.25
0.00
0.50
0.15
3.80
4.40
5.00
0.25
6.00
1.20
0.049
0.000
0.020
0.006
0.150
0.173
0.197
0.010
0.236
0.047
TAPING ORIENTATION
www.goodark.com
3/5
2016.03-Rev.B
LB1201S thru LB1210S
Low Profile Miniature Single Phase Surface Mount Bridge Rectifiers
Reverse Voltage 100~1000V Output Current 1.2A
Soldering Parameters
Reflow Soldering
Pre Heat
Sn-Pb Eutectic Assembly
100°C
Pb-Free assembly
150°C
- Temperature Min
(Ts(min))
- Temperature Max
(Ts(max))
150°C
200°C
- Time (min to max) (ts)
60 – 120 secs
3°C/second max
3°C/second max
60 – 180 secs
3°C/second max
3°C/second max
Average ramp up rate (Liquidus Temp (TL) to peak)
TS(max) to TL - Ramp-up Rate
- Temperature (TL)
183°C
217°C
(Liquidus)
Reflow
- Time (min to max) (ts)
60 – 150 seconds
240+0/-5 °C
10 –30 seconds
6°C/second max
6 minutes Max.
260°C
60 – 150 seconds
240+0/-5°C
20 – 40 seconds
6°C/second max
8 minutes Max.
260°C
Peak Temperature (TP)
Time within 5°C of actual peak Temperature (tp)
Ramp-down Rate
Time 25°C to peak Temperature (TP)
Do not exceed
Wave Soldering
Peak Temperature :
Dipping Time :
Soldering :
260+0/-5°C
10 seconds
1 time
www.goodark.com
4/5
2016.03-Rev.B
LB1201S thru LB1210S
Low Profile Miniature Single Phase Surface Mount Bridge Rectifiers
Reverse Voltage 100~1000V Output Current 1.2A
Disclaimers
These materials are intended as a reference to assist our customers in the selection of the Suzhou Good-
Ark product best suited to the customer’s application; they do not convey any license under any intellectual
property rights, or any other rights, belonging to Suzhou Good-Ark Electronics Co., Ltd.or a third party.
Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, or infringement of any
third-party’s rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or
circuit application examples contained in these materials.
All information contained in these materials, including product data, diagrams, charts, programs and
algorithms represents information on products at the time of publication of these materials, and are subject
to change by Suzhou Good-Ark Electronics Co., Ltd. without notice due to product improvements or other
reasons. It is therefore recommended that customers contact Suzhou Good-Ark Electronics Co., Ltd. or an
authorized Suzhou Good-Ark Electronics Co., Ltd. for the latest product information before purchasing a
product listed herein. The information described here may contain technical inaccuracies or typographical
errors. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, liability, or other
loss rising from these inaccuracies or errors. Please also pay attention to information published by Suzhou
Good-Ark Electronics Co., Ltd. by various means, including our website home page.
(http://www.goodark.com)
When using any or all of the information contained in these materials, including product data, diagrams,
charts, programs, and algorithms, Please be sure to evaluate all information as a total system before making
a final decision on the applicability of the information and products. Suzhou Good-Ark Electronics Co., Ltd.
assumes no responsibility for any damage, liability or other loss resulting from the information contained
herein.
The prior written approval of Suzhou Good-Ark Electronics Co., Ltd. is necessary to reprint or reproduce in
whole or in part these materials.
Please contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized distributor for further details on these
materials or the products contained herein.
www.goodark.com
5/5
2016.03-Rev.B
相关型号：
©2020 ICPDF网 联系我们和版权申明