KBU4BE4 [GOOD-ARK]
Bridge Rectifier Diode, 4A, 100V V(RRM),;型号: | KBU4BE4 |
厂家: | GOOD-ARK ELECTRONICS |
描述: | Bridge Rectifier Diode, 4A, 100V V(RRM), 二极管 |
文件: | 总2页 (文件大小:143K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
KBU4A thru KBU4M
Single-Phase Bridge Rectifiers
Reverse Voltage 50 to 1000 Volts Forward Current 4.0 Amperes
Features
ꢀ Ideal for printed circuit boards
ꢀ High surge current capability
ꢀ High case dielectric strength of 1500 VRMS
ꢀ Solder Dip 260 °C, 40 seconds
Mechanical Data
ꢀ Case: KBU
Epoxy meets UL-94V-0 Flammability rating
ꢀ Terminals: Silver plated (E4 Suffix) leads, solderable per
J-STD-002B and JESD22-B102D
ꢀ Polarity: As marked on body
ꢀ Mounting Torque: 10 cm-kg (8.8 inches-lbs) max.
ꢀ Recommended Torque: 5.7 cm-kg (5 inches-lbs)
Typical Applications
General purpose use in ac-to-dc bridge full wave rectification for
Monitor, TV, Printer, SMPS, Adapter, Audio equipment, and Home
Appliances applications
Maximum Ratings and Electrical Characteristics
Package outline dimensions in inches (millimeters)
Ratings at 25 oC ambient temperature unless otherwise specified.
Parameter
Symbols
KBU4A KBU4B KBU4D KBU4G
KBU4J
KBU4K KBU4M
Units
Maximum repetitive peak reverse voltage
Maximum RMS voltage
VRRM
VRMS
VDC
50
35
50
100
70
200
140
200
400
280
400
600
420
600
800
560
800
1000
700
Volts
Volts
Volts
Maximum DC blocking voltage
100
1000
(1)
Maximum average forward
rectified output current at
TC=100oC
4.0
4.0
IF(AV)
Amps
(2)
TA=30oC
Peak forward surge current, 8.3ms single half sine-wave
superimposed on rated load (JEDEC Method)
IFSM
VF
IR
200.0
1.0
Amps
Volt
Maximum instantaneous forward voltage drop per leg at 4.0A
Maximum DC reverse current
at rated DC blocking voltage per leg
TA=25oC
5.0
1.0
uA
mA
TA=125oC
(2)
RθJA
RθJC
19
4.0
Typical thermal resistance per leg
oC/W
oC
(1)
Operating junction and storage temperature range
TJ, TSTG
-55 to +150
Notes:
1. Units mounted on a 5.1 x 5.1 x 0.15 cm thick Al. Plate
2. Units mounted on P.C.B. with 0.5 x 0.5" (13 x 13 mm) copper pads and 0.375" (9.5 mm) lead length
3. Recommended mounting position is to bolt down on heatsink with silicone thermal compound for maximum heat transfer with #6 screw
446
RATINGS AND CHARACTERISTIC CURVES
(TA = 25oC unless otherwise noted)
447
相关型号:
KBU4D-BP
Bridge Rectifier Diode, 1 Phase, 4A, 200V V(RRM), Silicon, ROHS COMPLIANT, PLASTIC, KBU, 4 PIN
MCC
©2020 ICPDF网 联系我们和版权申明