5KP180A [GOOD-ARK]
Transient Voltage Suppressors Peak Pulse Power 5000W Stand-off Voltage 5.0 to 250V; 瞬态电压抑制器峰值脉冲功率5000W对峙电压5.0〜 250V型号: | 5KP180A |
厂家: | GOOD-ARK ELECTRONICS |
描述: | Transient Voltage Suppressors Peak Pulse Power 5000W Stand-off Voltage 5.0 to 250V |
文件: | 总4页 (文件大小:182K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
5KP5.0 thru 5KP250CA
Transient Voltage Suppressors
Peak Pulse Power 5000W Stand-off Voltage 5.0 to 250V
Features
ꢀ Plastic package has Underwriters Laboratory Flammability
Classification 94V-0
ꢀ Glass passivated junction
ꢀ 5000W peak pulse power capability with a 10/1000ms
waveform, repetition rate (duty cycle): 0.05%
ꢀ Excellent clamping capability
ꢀ Low incremental surge resistance
ꢀ Fast response time: theoretically (with no parisitic inductance)
less than 1ps from 0 Volts to V(BR) for unidirectional and 5ns for
bidirectional types.
ꢀ Devices with V(BR) > 10V ID are typically ID less than 1.0mA
ꢀ High temperature soldering guaranteed:
265oC/10 seconds, 0.375" (9.5mm) lead length,
5lbs. (2.3 kg) tension
Mechanical Data
ꢀ Case: Molded plastic body over glass passivated junction
ꢀ Terminals: Solder plated axial leads, solderable per
MIL-STD-750, Method 2026
ꢀ Polarity: The color band denotes the cathode, which is positive
with respect to the anode under normal TVS operation
ꢀ Mounting Position: Any
ꢀ Weight: 0.07 ounce, 2.1 grams
Devices for Bidirectional Applications
For bi-directional, use C or CA suffix for types 5KP5.0 thru types 5KP110A (e.g. 5KP5.0C, 1.5KP5.0CA). Electrical
characteristics apply in both directions.
Maximum Ratings and Thermal Characteristics
Ratings at 25oC ambient temperature unless otherwise specified.
Parameter
Symbol
Value
Unit
Peak pulse power dissipation with a 10/1000us waveform (1)
Peak pulse current with a 10/1000us waveform (1)
PPPM
IPPM
Minimum 5000
See Next Table
8.0
W
A
Steady state power dissipation
PM(AV)
W
at TL=75oC, lead lengths 0.375" (9.5mm) (2)
Peak forward surge current, 8.3ms single half sine-wave (3)
IFSM
VF
500
3.5
Amps
Volts
oC
(3)
Instantaneous forward voltage at 100A
Operating junction and storage temperature range
TJ, TSTG
-55 to +175
Notes:
1. Non-repetitive current pulse, per Fig.3 and derated above TA=25oC per Fig. 2
2. Mounted on copper pad area of 1.6 x 1.6" (40 x 40 mm) per Fig. 5.
3. Measured on 8.3ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum.
610
Electrical Characteristics
(TA=25oC unless otherwise noted.)
Maximum
reverse
leakage
at VWM
ID
Breakdown voltage
V(BR)
Maximum
peak pulse
current
Maximum
clamping
voltage
at IPPM
VC (Volts)
Maximum
temperature
coefficient
of V(BR)
Test
current
at IT
Stand-off
voltage
VWM
(Volts) (1)
(2)
IPPM
Device type
5KP5.0
5KP5.0A
5KP6.0
5KP6.0A
5KP6.5
5KP6.5A
5KP7.0
5KP7.0A
5KP7.5
5KP7.5A
5KP8.0
5KP8.0A
5KP8.5
5KP8.5A
5KP9.0
5KP9.0A
5KP10
Min.
6.40
6.40
6.67
6.67
7.22
7.22
7.78
7.78
8.33
8.33
8.89
8.89
9.44
9.44
10.0
10.0
11.1
11.1
12.2
12.2
13.3
13.3
14.4
14.4
15.6
15.6
16.7
16.7
17.8
17.8
18.9
18.9
20.0
20.0
22.2
22.2
24.4
24.4
26.7
26.7
28.9
28.9
31.1
31.1
33.3
33.3
Max.
7.30
7.00
8.15
7.37
8.82
7.98
9.51
8.60
10.2
9.21
10.9
9.83
11.5
10.4
12.2
11.1
13.6
12.3
14.9
13.5
16.3
14.7
17.6
15.9
19.1
17.2
20.4
18.5
21.8
19.7
23.1
20.9
24.4
22.1
27.1
24.5
29.8
26.9
32.6
29.5
35.3
31.9
38.0
34.4
40.7
36.8
(mA)
(Volts)
(uA)
(A)
521
543
439
485
407
446
376
417
350
388
333
368
314
347
296
325
266
294
249
275
227
251
210
233
194
216
186
205
174
192
164
181
155
171
140
154
127
141
116
129
107
119
100
110
93.5
103
(% / oC)
50
50
5.0
5.0
2000
2000
5000
5000
2000
2000
1000
1000
250
250
150
150
50
9.6
0.057
0.057
0.061
0.061
0.065
0.065
0.068
0.068
0.073
0.073
0.075
0.075
0.078
0.078
0.081
0.081
0.084
0.084
0.086
0.086
0.088
0.088
0.090
0.090
0.092
0.092
0.094
0.094
0.096
0.096
0.097
0.097
0.098
0.098
0.099
0.099
0.100
0.100
0.101
0.101
0.101
0.101
0.102
0.102
0.103
0.103
9.2
50
6.0
11.4
10.3
12.3
11.2
13.3
12.0
14.3
12.9
15.0
13.6
15.9
14.4
16.9
15.4
18.8
17.0
20.1
18.2
22.0
19.9
23.8
21.5
25.8
23.2
26.9
24.4
28.8
26.0
30.5
27.6
32.2
29.2
35.8
32.4
39.4
35.5
43.0
38.9
46.6
42.1
50.0
45.4
53.5
48.4
50
6.0
50
6.5
50
6.5
50
7.0
50
7.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
7.5
7.5
8.0
8.0
8.5
8.5
50
9.0
20
9.0
20
10.0
10.0
11.0
11.0
12.0
12.0
13.0
13.0
14.0
14.0
15.0
15.0
16.0
16.0
17.0
17.0
18.0
18.0
20.0
20.0
22.0
22.0
24.0
24.0
26.0
26.0
28.0
28.0
30.0
30.0
15
5KP10A
5KP11
15
10
5KP11A
5KP12
10
5.0
5.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
5KP12A
5KP13
5KP13A
5KP14
5KP14A
5KP15
5KP15A
5KP16
5KP16A
5KP17
5KP17A
5KP18
5KP18A
5KP20
5KP20A
5KP22
5KP22A
5KP24
5KP24A
5KP26
5KP26A
5KP28
5KP28A
5KP30
5KP30A
611
Electrical Characteristics
(TA=25oC unless otherwise noted.)
Maximum
reverse
leakage
at VWM
ID
Maximum
clamping
voltage
at IPPM
VC
(Volts)
Breakdown voltage
V(BR)
Maximum
peak pulse
current
IPPM
(A)
Maximum
temperature
coefficient
of V(BR)
Test
current
at IT
Stand-off
voltage
VWM
(Volts) (1)
(2)
Device type
5KP33
Min.
36.7
36.7
40.0
40.0
44.4
44.4
47.8
47.8
50.0
50.0
53.3
53.3
56.7
56.7
60.0
60.0
64.4
64.4
66.7
66.7
71.1
71.1
77.8
77.8
83.3
83.3
86.7
86.7
94.4
94.4
100
100
111
Max.
44.9
40.6
48.9
44.2
54.3
49.1
58.4
52.8
61.1
55.3
65.2
58.9
69.3
62.7
73.3
66.3
78.7
71.2
81.5
73.7
86.9
78.6
95.1
86.0
102
92.1
106
95.8
115
(mA)
(Volts)
(uA)
(% / oC)
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
33.0
33.0
36.0
36.0
40.0
40.0
43.0
43.0
45.0
45.0
48.0
48.0
51.0
51.0
54.0
54.0
58.0
58.0
60.0
60.0
64.0
64.0
70.0
70.0
75.0
75.0
78.0
78.0
85.0
85.0
90.0
90.0
100
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
84.7
93.8
77.8
86.1
70.0
77.5
65.2
72.0
62.3
68.8
58.5
64.6
54.9
60.7
51.9
57.4
48.5
53.4
46.7
51.7
43.9
48.5
40.0
44.2
37.3
41.3
36.0
39.7
33.1
36.5
31.3
34.2
27.9
30.9
25.5
28.2
26.4
24.4
21.0
19.7
18.5
17.5
16.5
15.5
14.6
13.7
12.0
59.0
53.3
64.3
58.1
71.4
64.5
76.7
69.4
80.3
72.7
85.5
77.4
91.1
82.4
96.3
87.1
103
94
0.104
0.104
0.104
0.104
0.105
0.105
0.105
0.105
0.106
0.106
0.106
0.106
0.107
0.107
0.107
0.107
0.107
0.107
0.108
0.108
0.108
0.108
0.108
0.108
0.108
0.108
0.108
0.108
0.108
0.110
0.110
0.110
0.110
0.110
0.112
0.112
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
5KP33A
5KP36
5KP36A
5KP40
5KP40A
5KP43
5KP43A
5KP45
5KP45A
5KP48
5KP48A
5KP51
5KP51A
5KP54
5KP54A
5KP58
5KP58A
5KP60
107
97
5KP60A
5KP64
114
5KP64A
5KP70
103
125
113
5KP70A
5KP75
134
121
139
126
151
137
160
146
179
162
196
177
193
209
243
259
275
292
310
329.2
349.5
371.1
425
5KP75A
5KP78
5KP78A
5KP85
5KP85A
5KP90
104
122
111
5KP90A
5KP100
5KP100A
5KP110
5KP110A
5KP120A
5KP130A
5KP150A
5KP160A
5KP170A
5KP180A
5KP190A
5KP200A
5KP210A
5KP220A
5KP250A
136
123
149
135
147
159
185
197
209
221
233
246
258
270
306
111
100
122
122
133
144
167
178
189
200
211
110
110
120
130
150
160
170
180
190
222
233
244
277
200
210
220
250
Notes:
1. V(BR) measured after IT applied for 300us, IT=square wave pulse or equivalent
2. Surge current waveform per Fig. 3 and derate per Fig. 2
3. All terms and symbols are consistent with ANSI/IEEE CA62.35
4. For parts without A, the VBR is +10%
Application:
The 5KP series of high power transient voltage suppressors were designed to be used on the output of switching power supplies. These devices may be used to
replace crowbar circuits. Both the 5 and 10 percent voltage tolerances are referenced to the power supply output voltage level.
They are able to withstand high levels of peak current while allowing a circuit breaker to trip or a fuse blow before shorting. This will enable the user to reset the
breaker or replace the fuse and continue operation. For this type operation, it is recommended that a sufficient mounting surface be used for dissipating the heat
generated by the Transient Voltage Suppressor during the transient or over-voltage condition.
Transient Voltage Suppressors are Silicon PN Junction devices designed for absorption of high voltage transients associated with power disturbances, switching and
induced lighting effects. This series is available from 5.0 volts thru 110 volts.
612
RATINGS AND CHARACTERISTIC CURVES
(TA = 25oC unless otherwise noted)
613
相关型号:
5KP180A-HR
The 5KP-HR High Reliability Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events
LITTELFUSE
5KP180A-HRA
The 5KP-HRA High Reliability Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events
LITTELFUSE
5KP180A-T3
Trans Voltage Suppressor Diode, 5000W, 180V V(RWM), Unidirectional, 1 Element, Silicon, PLASTIC, P-600, 2 PIN
WTE
5KP180AB
5000W, UNIDIRECTIONAL, SILICON, TVS DIODE, HALOGEN FREE AND ROHS COMPLIANT, PLASTIC PACKAGE-2
LITTELFUSE
©2020 ICPDF网 联系我们和版权申明