790-024PF-15P2M [GLENAIR]
D Microminiature Connector, 15 Contact(s), Male, Crimp Terminal, Receptacle;型号: | 790-024PF-15P2M |
厂家: | Glenair |
描述: | D Microminiature Connector, 15 Contact(s), Male, Crimp Terminal, Receptacle |
文件: | 总3页 (文件大小:739K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Series 79 Micro-Crimp
Section D: Cable Connectors, Crimp Termination
CABLE RECEPtACLES WIth PIN CꢀNtACtS, CRIMP tERMINAtIꢀN, 790-024P
Rugged, lightweight 790-024P connectors feature machined aluminum shells,
fluorosilicone face seals and wire grommets for environmental protection. Contacts are
rear-release snap-in crimp type. Connectors are supplied with crimp contacts packaged
separately. Size #23 signal pins accept up to #22 AWG wire. Size #16 contacts accept
#16-18 AWG wire. Size #12 contacts accept #12-14 AWG wire. Size 12 and 16 cavities
also accept coaxial contacts purchased separately. Connector shell features a groove
for attachment of a low-profile EMI backshell adapter 799-015, ordered separately.
A
B
C
D
E
F
HOW TO ORDER
Sample Part Number
790-024P
C-13
M
P
Base Part
Number
Shell Size -
Insert Arr.
Shell Finish
Hardware Option
See Table 1 for
Available Insert
Arrangements
790-024P
Cable Receptacle
with Pin Contacts
M
Electroless Nickel
general purpose
applications
. To order a connector
without size #16 or #12
power pins, substitute
“W” instead of “P” in the
insert arrangement.
MT
N
P
Nickel-PTFE
Thru-Hole
No Hardware
Female Jackpost
1000 Hour Grey™
maximum corrosion
protection and durability
(non-reflective grey)
Example:
ZNU
36P2 is supplied with 2
Zinc-Nickel with Black
Chromate
power pins.
36W2 is supplied less
tactical applications
(non-reflective black)
L
K
the power pins.
Low-Profile Captivated
Jackscrew, Hex Head
Slot-Head Extended
Jackscrew
See Section B for
coaxial contacts
purchased separately.
Additional shell
finishes are listed on
page C-9.
G
H
S
T
Low-Profile Captivated
Screwlock, Hex Head
Slot-Head Extended
Captivated Screwlock
SPECIFICATIONS
MATERIALS AND FINISHES
Current Rating
#23 5 AMPS, #16 13 A., #12 23 A.
Shell
Aluminum alloy
Dielectric Withstanding
Voltage
#23 500 VAC RMS, #12 and #16
1800 VAC RMS
Copper alloy, 50 microinches gold
plated
Contacts
Insulation Resistance
Operating Temperature -65° C. to +150° C.
5000 megohms minimum
Insulators
Retention Clips
Liquid crystal polymer (LCP)
Beryllium copper alloy
Shock
Vibration
300 g.
37 g.
Interfacial Seal, Grommet Flourosilicone rubber
Hardware 300 series stainless steel
Dimensions in inches (millimeters) and are subject to change without notice.
CAGE Code 06324
© 2009 Glenair, Inc.
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: sales@glenair.com
D-1
Rev. 04-July-2009
Series 79 Micro-Crimp
Section D: Cable Connectors, Crimp Termination
Table 1 Contact Arrangements
CRꢀSS-SECtIꢀNAL vIEW ꢀF 790-024P
Contact
Quantity
REAR INSULATOR
RETAINING CLIP
GROMMET
A
B
C
D
E
F
Layout #23#16#12
Face View
INTERFACIAL SEAL
POTTING
5
A-5
WIRE (REF.)
2
B-2P2
B-9
PIN CONTACT
FRONT INSULATOR
9
13
15
C-13
GROOVE FOR
SHELL
EMI ADAPTER
D-15
TABLE 2 HARDWARE OPTION
3
2
2
D-3P3
D-7P2
E-11P2
E-19
.190 (4.83)
MAX
5
9
19
4
3
2
E-7P3
F-15P2
F-23
N
P
13
23
No Mating Hardware
Connector is supplied with thru-holes. Shell
sizes H and L are .148" (3.76) diameter, other shell Shell sizes H and L have #4-40 UNC thread, other
sizes are .092" (2.34) diameter. Accepts standard
Micro-D M83513 hardware.
Jackposts
Connector is supplied with removable jackposts.
sizes have #2-56 thread. Stainless steel. Conforms
to M83513/05.
5
F-5P5
G-33
.155
(3.94)
MAX
33
6
.925
(23.5)
MAX
4
2
5
h-10P4
h-29P7
H-36P2
h-54P2
H-5P5
H-66
22
34
52
7
L
K
2
Extended Jackscrews
Connector is supplied with stainless steel slot
head non-removable jackscrews. Shell sizes H
and L have #4-40 UNC thread, other sizes have
#2-56 thread.
Hex Head Jackscrews
Connector is supplied with stainless steel non-
removable low profile jackscrews. Shell sizes H
and L have #4-40 UNC thread, other sizes have
#2-56 thread.
66
13
23
33
4
G
H
J-17P4
J-25P2
J-33
2
.925
(23.50)
MAX
.290 (7.37)
MAX
7
4
2
J-7P7
K-27P4
K-35P2
K-43
23
33
43
S
T
Hex Head Screwlocks
Extended Screwlocks
Connector is supplied with stainless steel non-
removable low profile screwlocks. Shell sizes H
and L have #4-40 UNC thread, other sizes have
#2-56 thread. Screwlocks allow the connector to
be mated before the screws are fastened.
Connector is supplied with stainless steel non-
removable slot head screwlocks. Shell sizes H
and L have #4-40 UNC thread, other sizes have
#2-56 thread. Screwlocks allow the connector to
be mated before the screws are fastened.
9
K-9P9
L-6P6
6
Dimensions in inches (millimeters) and are subject to change without notice.
CAGE Code 06324
© 2009 Glenair, Inc.
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: sales@glenair.com
D-2
Rev. 04-July-2009
Series 79 Micro-Crimp
Section D: Cable Connectors, Crimp Termination
790-024P DIMENSIꢀNS
1.435 (1.80) MAX
A MAX
B BASIC
C MAX
A
B
C
D
E
F
1.215 (30.86) BASIC
1.079 (27.41) MAX
.395
(10.03)
MAX
.308 (7.82) MAX
.096/.088 (2.44/2.24)
DIA 2 PLACES
.096/.088 (2.44/2.24)
DIA 2 PLACES
.195 ± .003
(4.95 ± 0.08)
.195 ± .003
(4.95 ± 0.08)
.760
(19.30)
MAX
.093 ± .005
(2.36 ± 0.13)
.760 (19.30)
MAX
.093 ± .005
(2.36 ± 0.13)
1.055 (26.80)
MAX
GROOVE FOR
ATTACHMENT OF
EMI ADAPTER
799-015
D MAX
SHELL SIZE G
E MAX
F BASIC
G MAX
SHELL SIZES A, B, C, D, E, F, J, K
.410 (10.41)
MAX
.152/.145 (3.86/3.68)
DIA 2 PLACES
.195 ± .003
(4.95 ± 0.08)
.760 (19.30)
MAX
.093 ± .005
(2.36 ± 0.13)
H MAX
SHELL SIZE H AND L
G
H
790-024P DIMENSIꢀNS
A Max.
In. mm. In . mm.
.785 19.94
.935 23.75
1.085 27.65
1.185 30.10
B Basic
C Max.
In. mm.
D Max.
In. mm.
E Max.
F Basic
In. mm.
G Max.
H Max.
Shell
Size
In.
mm.
—
In.
mm.
—
In.
—
—
—
—
—
—
mm.
.565 14.35
.715 18.16
.865 21.97
.965 24.51
.400 10.16
.551 14.00
.701 17.81
.801 20.35
.951 24.16
.390
9.91
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
A
B
C
D
E
F
.540 13.72
.690 17.53
.790 20.07
.940 23.88
—
—
—
—
—
—
1.335 33.91 1.115 28.32
—
—
1.485 37.72 1.265 32.13 1.101 27.96 1.090 27.69
—
—
—
—
—
—
—
—
—
—
2.175 55.25 1.800 45.72 1.450 36.83 1.440 36.58
H
J
K
L
1.845 46.86 1.615 41.02 1.460 37.08 1.450 36.83
2.240 56.90 2.015 51.18 1.860 47.24 1.840 46.74
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
2.420 61.47 2.036 51.71 1.686 42.82 1.675 42.55
Dimensions in inches (millimeters) and are subject to change without notice.
CAGE Code 06324
© 2009 Glenair, Inc.
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: sales@glenair.com
D-3
Rev. 04-July-2009
相关型号:
790-024PF-15P2MK
D Microminiature Connector, 15 Contact(s), Female, Crimp Terminal, Receptacle
GLENAIR
790-024PF-15P2ML
D Microminiature Connector, 15 Contact(s), Female, Crimp Terminal, Receptacle
GLENAIR
790-024PF-15P2MS
D Microminiature Connector, 15 Contact(s), Female, Crimp Terminal, Receptacle
GLENAIR
790-024PF-15P2MTK
D Microminiature Connector, 15 Contact(s), Female, Crimp Terminal, Receptacle, ROHS COMPLIANT
GLENAIR
790-024PF-15P2MTL
D Microminiature Connector, 15 Contact(s), Female, Crimp Terminal, Receptacle, ROHS COMPLIANT
GLENAIR
790-024PF-15P2MTN
D Microminiature Connector, 15 Contact(s), Female, Crimp Terminal, Receptacle, ROHS COMPLIANT
GLENAIR
790-024PF-15P2MTT
D Microminiature Connector, 15 Contact(s), Female, Crimp Terminal, Receptacle, ROHS COMPLIANT
GLENAIR
790-024PF-15P2ZNUK
D Microminiature Connector, 15 Contact(s), Female, Crimp Terminal, Receptacle
GLENAIR
790-024PF-15P2ZNUS
D Microminiature Connector, 15 Contact(s), Female, Crimp Terminal, Receptacle
GLENAIR
790-024PF-15P2ZNUT
D Microminiature Connector, 15 Contact(s), Female, Crimp Terminal, Receptacle
GLENAIR
790-024PF-23MN
D Microminiature Connector, 23 Contact(s), Female, Crimp Terminal, Receptacle
GLENAIR
790-024PF-23MP
D Microminiature Connector, 23 Contact(s), Female, Crimp Terminal, Receptacle
GLENAIR
©2020 ICPDF网 联系我们和版权申明