GPY0029B-HE011 [GENERALPLUS]
Linear Regulator;
| 型号： | GPY0029B-HE011 |
| 厂家： | 
Generalplus Technology Inc. |
| 描述： | Linear Regulator |
| 文件： | 总15页 (文件大小：537K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
GPY0029B
Linear Regulator
JAN. 19, 2010
Version 1.4
GENERALPLUS TECHNOLOGY INC. reserves the right to change this documentation without prior notice. Information provided by GENERALPLUS
TECHNOLOGY INC. is believed to be accurate and reliable. However, GENERALPLUS TECHNOLOGY INC. makes no warranty for any errors which may
appear in this document. Contact GENERALPLUS TECHNOLOGY INC. to obtain the latest version of device specifications before placing your order. No
responsibility is assumed by GENERALPLUS TECHNOLOGY INC. for any infringement of patent or other rights of third parties which may result from its use.
In addition, GENERALPLUS products are not authorized for use as critical components in life support devices/systems or aviation devices/systems, where a
malfunction or failure of the product may reasonably be expected to result in significant injury to the user, without the express written approval of Generalplus.
GPY0029B
Table of Contents
PAGE
1. GENERAL DESCRIPTION.......................................................................................................................................................................... 3
2. APPLICATION............................................................................................................................................................................................. 3
3. FEATURES.................................................................................................................................................................................................. 3
4. BLOCK DIAGRAM ...................................................................................................................................................................................... 3
5. SIGNAL DESCRIPTIONS............................................................................................................................................................................ 4
5.1. 4 PIN ONLY FOR CHIP ON BOARD (COB)............................................................................................................................................... 4
5.2. 3 PIN (SOT-89) .................................................................................................................................................................................... 4
5.3. PIN CONFIGURATION ............................................................................................................................................................................. 4
5.4. PAD ASSIGNMENT AND LOCATIONS......................................................................................................................................................... 5
6. ELECTRICAL SPECIFICATIONS ............................................................................................................................................................... 6
6.1. ABSOLUTE MAXIMUM RATINGS ............................................................................................................................................................... 6
6.2. DC CHARACTERISTIC............................................................................................................................................................................. 6
6.3. TYPICAL OPERATING CHARACTERISTICS ................................................................................................................................................. 7
6.3.1.
6.3.2.
6.3.3.
6.3.4.
6.3.5.
6.3.6.
Output voltage vs. output current (VOUT = 3.3V) ................................................................................................................... 7
Output voltage vs. input voltage (VOUT = 3.3V)..................................................................................................................... 7
Load transient response; IOUT = 10mA to 150mA.................................................................................................................. 7
Load transient response; IOUT = 1mA to 50mA...................................................................................................................... 7
Line transient response; IOUT=150mA(VIN=4 to 5V) .............................................................................................................. 7
Line transient response; IOUT=10mA (VIN=4 to 5V) ............................................................................................................... 7
6.4. APPLICATION CIRCUIT ............................................................................................................................................................................ 8
6.4.1.
6.4.2.
PIN (with Reset Function)..................................................................................................................................................... 8
PIN (no Reset Function)....................................................................................................................................................... 8
6.5. RESET TIMING DIAGRAM ........................................................................................................................................................................ 9
7. PACKAGE/PAD LOCATIONS ................................................................................................................................................................... 10
7.1. ORDERING INFORMATION ..................................................................................................................................................................... 10
7.2. PACKAGE INFORMATION ........................................................................................................................................................................11
7.2.1.
7.2.2.
3 PIN SOT89 package size .................................................................................................................................................11
4-PIN Chip On Board (COB) bonding diagram .................................................................................................................. 12
7.3. STORAGE CONDITION AND PERIOD FOR PACKAGE................................................................................................................................. 12
7.4. RECOMMENDED SMT TEMPERATURE PROFILE...................................................................................................................................... 12
8. HTOL TEST RESULT ................................................................................................................................................................................ 13
9. DISCLAIMER............................................................................................................................................................................................. 14
10.REVISION HISTORY ................................................................................................................................................................................. 15
© Generalplus Technology Inc.
Proprietary & Confidential
2
JAN. 19, 2010
Version: 1.4
GPY0029B
LINEAR REGULATOR
1. GENERAL DESCRIPTION
3. FEATURES
The GPY0029B is a voltage regulator IC with ultra-low quiescent
current and low voltage detection by CMOS process. It operates
to +7.0V input range and delivers up to 150mA.
Low Quiescent Current (Typ. 3μA @ VOUT = 3.0V/3.3V, VIN = 5.0V)
High Current Driving Capability
(Typ. 150mA @ VOUT = 3.0V/3.3V, VIN = 5.0V)
Over Current Limitation (Typ. 300mA @ VOUT = 3.0V/3.3V, VIN = 5.0V )
Small Dropout Voltage (Typ. 40mV @ VOUT = 3.0V/3.3V, IOUT = 1.0mA)
Low Temperature-Drift Coefficient of Output Voltage
(Typ. ±50ppm/0C)
2. APPLICATION
Battery-powered equipment
Hand-held communication equipment
Audio/Video system
Excellent Line Regulation (Typ. 0.15%/V)
High Accuracy Output Voltage (±3%)
RESET output pin for low VIN and low VOUT detection
Only One 10μF Capacitor Required (ESR Range : 0.5 ~ 5 Ω)
Toys
Three pin Types of Package or Dice Form
4. BLOCK DIAGRAM
VIN
Vref1
Voltage
Vref
reference
OP1
PMOS
OP2
C1
FB
R1
R3
R4
VOUT
85%Vref
RESET
C2
COMP1
R2
NMOS
COMP2
GND
© Generalplus Technology Inc.
Proprietary & Confidential
3
JAN. 19, 2010
Version: 1.4
GPY0029B
5. SIGNAL DESCRIPTIONS
5.1. 4 PIN Only For Chip On Board (COB)
Mnemonic
PIN No. PAD No.
Type
Description
Open Drain Reset Output, Low Reset
RESET
GND
VOUT
VIN
1
2
3
4
3
5
4
2
1
3
O
G
O
I
Chip Ground
Output Regulated Voltage
Input Voltage
FB
I
Regulator Feedback Input. FB pad must be bonded to VOUT pin
5.2. 3 PIN (SOT-89)
Mnemonic
PIN No.
Type
Description
GND
VIN
1
2
3
G
I
Chip Ground
Input Voltage
VOUT
O
Output Regulated Voltage
5.3. PIN Configuration
Customize COB-4pin
SOT-89
4
3
GPY0029B / 29B-30
COB
GPY0029B / 29B-30
1
2
1
2
3
Customize COB-4pin
/ 29B-30
© Generalplus Technology Inc.
Proprietary & Confidential
4
JAN. 19, 2010
Version: 1.4
GPY0029B
5.4. PAD Assignment and Locations
1
2
VIN
3
VOUT
FB
RESET
5
GND
4
( 0 , 0 )
This IC substrate should be connected to VSS
Note1: To ensure IC functions properly, please bond all of VDD and VSS pins.
Note2: FB pad must be bonded to VOUT pin in COB or SOT89 package.
© Generalplus Technology Inc.
Proprietary & Confidential
5
JAN. 19, 2010
Version: 1.4
GPY0029B
6. ELECTRICAL SPECIFICATIONS
6.1. Absolute Maximum Ratings
Characteristic
Input Voltage
Symbol
VIN
Rating
+7.0V
Unit
V
V
Output Voltage
VOUT
TOPT
-0.3 ~ (VIN + 0.3)
0 - 70
℃
℃
Operating Temperature
Storage Temperature
Power Consumption (#)
TSTG
-40 - 125
500
PWATT
mW
Note1: Stresses beyond those given in the “Absolute Maximum Ratings” table may cause operational errors or damage to the device. For normal operational
conditions, see Electrical Characteristic.
Note2: (#) applied to SOT-89 package.
Note3: For bonding-wire current density & package power dissipation issues, we highly recommend that the power consumption should not exceed “Absolute
Maximum Ratings”; it may cause device damage or affect device reliability.
6.2. DC Characteristic
(VIN = 5.0V, VOUT (target) = 3.0V / 3.3V, CIN = COUT = 10μF, Typical values are at TOPT = 25ºC)
Item
Test Conditions
Symbol
Min.
3.0
2.7
3.2
2.91
150
200
-
Typ.
-
Max.
7.0
7.0
3.4
3.09
-
Unit
V
GPY0029B
Input Voltage
VIN
GPY0029B-30
GPY0029B
-
V
3.3
3.0
-
V
10μA≦ IOUT ≦150mA
Output Voltage
VOUT
GPY0029B-30
V
Output Current
Current Limit
VIN = 3.6V
IOUT
ILIM
mA
mA
mV
300
40
-
VIN = 5.0V, 1mA ≦ IOUT ≦ 150mA
△VOUT
Load Regulation
60
ΔVout
IOUT = 1mA, VOUT + 0.5V ≦ VIN ≦ 7.0V
Line Regulation
-
0.15
-
%/V
ΔVin × Vout
I
OUT = 1mA, Vin = VOUT (normal),
Dropout Voltage
VDIF
-
-
40
3.0
±50
60
mV
μA
VDIF = VIN - VOUT , VOUT = 3.3V
IOUT = 0
Quiescent Current
ISS
6.0
ΔVout
IOUT = 10mA,
0OC ≦ TOPT ≦ 70OC , VOUT = 3.3V
ppm/℃
Temperature Coefficient
-
-
ΔT
Reset Function
RESET Output Low Voltage
Output High Leakage Current
RESET Output Sinking 2mA
VRESET = 5V
VOL
-
-
-
-
-
-
-
50
-
100
mV
nA
V
IRESET
100
Threshold to
GPY0029B
2.87
2.65
2.90
2.65
22
-
-
-
-
-
VTHVOUT
Rising edge, referred to VOUT
Falling edge of VIN
Output Voltage
GPY0029B-30
GPY0029B
V
Threshold to
Input Voltage
V
VTHVIN
GPY0029B-30
V
TDPOR
TDLVIN
Power-ON Reset Delay Time
VIN Reset Delay Time
See Timing Diagram
See Timing Diagram
See Timing Diagram
mS
mS
mS
-
-
100
1
8
VOUT Reset Delay Time
TDLVOUT
-
Note1: VOUT (normal) @ VIN = 5.0V, IOUT = 1mA, Vout = 3.0V / 3.3V, TOPT = 25 OC
Note2: Pwatt = (VIN - VOUT)* IOUT; SOT-89 package maximum power dissipation is 500mW for GPY0029B.
© Generalplus Technology Inc.
Proprietary & Confidential
6
JAN. 19, 2010
Version: 1.4
GPY0029B
6.3. Typical Operating Characteristics
6.3.4. Load transient response; IOUT = 1mA to 50mA
6.3.1. Output voltage vs. output current (VOUT = 3.3V)
(ΔVOUT = 30mV)
VIN=3.6V
VIN=5.0V
VIN=6.0V
CH2: VOUT
3.324
3.322
3.320
3.318
3.316
3.314
3.312
3.310
3.308
(ΔVOUT = 45mV)
CH1: IOUT
VIN = 5.0V; IOUT =1mA to 50mA & tr=tf=10μs; COUT=10μF
CH1: 200mV CH2: 50.0mV M 100μs
0
20
40
60
80
100
120
140
160
Output Current (mA)
6.3.5. Line transient response; IOUT=150mA(VIN=4 to 5V)
6.3.2. Output voltage vs. input voltage (VOUT = 3.3V)
Iout=1mA
Iout=50mA
Iout=150mA
(ΔVOUT = 8mV)
CH2: VOUT
3.350
3.300
3.250
3.200
3.150
3.100
3.050
3.000
2.950
(ΔVOUT = 8mV)
CH1: VIN
VIN =4.0V to 5.0V & tr=tf=10μs; IOUT =150mA; COUT=10μF
CH1: 500mV CH2: 20.0mV M 100μs
2.90
3.30
3.70
4.10
4.50
4.90
5.30
5.70
6.10
Intput Voltage (V)
6.3.6. Line transient response; IOUT=10mA (VIN=4 to 5V)
6.3.3. Load transient response; IOUT = 10mA to 150mA
(ΔVOUT = 3mV)
(ΔVOUT = 32mV)
CH2: VOUT
CH2: VOUT
(ΔVOUT = 5mV)
(ΔVOUT = 46mV)
CH1: VIN
CH1: IOUT
VIN =4.0V to 5.0V & tr=tf=10μs; IOUT =10mA; COUT=10μF
VIN = 5.0V; IOUT =10mA to 150mA & tr=tf=10μs; COUT=10μF
CH1: 500mV CH2: 50.0mV M 100μs
CH1: 500mV CH2: 20.0mV M 100μs
© Generalplus Technology Inc.
Proprietary & Confidential
7
JAN. 19, 2010
Version: 1.4
GPY0029B
6.4. Application Circuit
6.4.1. PIN (with Reset Function)
VOUT
/ FB
VIN
GND
RESET
Note: FB pad must be bonded to VOUT pin in COB.
6.4.2. PIN (no Reset Function)
VIN
VOUT
VOUT
/ FB
VIN
VIN
VOUT
GPY0029B / 29B-30
10μF
10μF
GND
GND
GND
Note: FB pad must be bonded to VOUT pin in COB or SOT89 package.
© Generalplus Technology Inc.
Proprietary & Confidential
8
JAN. 19, 2010
Version: 1.4
GPY0029B
6.5. Reset Timing Diagram
VIN
VTHVIN+0.15V
VTHVIN
t
t
t
VOUT
3.3V
VTHVOUT+0.05V
VTHVOUT
RESET
TDLVIN
TDLVIN
TDLVOUT
TDPOR
Note: When power on, Low VIN threshold voltage is VTHVIN
.
© Generalplus Technology Inc.
Proprietary & Confidential
9
JAN. 19, 2010
Version: 1.4
GPY0029B
7. PACKAGE/PAD LOCATIONS
7.1. Ordering Information
Output
Product Number
Package Type
Chip form (VOUT = 3.3V ±3%)
Package Marking
Voltage (V)
GPY0029B - C
3.3
3.0
3.3
3.0
3.3
3.0
N/A
GPY0029B - 30 - C
Chip form (VOUT = 3.0V ±3%)
N/A
GPY0029B - HE011
GPY0029B - 30 - HE011
GPY0029B - EE011
GPY0029B - 30 - EE011
Package form - SOT89 (VOUT = 3.3V ±3%)
Package form - SOT89 (VOUT = 3.0V ±3%)
Package form (Tape & reel) - SOT89 (VOUT = 3.3V ±3%)
Package form (Tape & reel) - SOT89 (VOUT = 3.0V ±3%)
Y0029B
Y29B30
Y0029B
Y29B30
© Generalplus Technology Inc.
Proprietary & Confidential
10
JAN. 19, 2010
Version: 1.4
GPY0029B
7.2. Package Information
7.2.1. 3 PIN SOT89 package size
D
D1
POLISHED(2X)
B1
C
B
100(2X)
e
e1
Symbol
Min.
1.40
0.44
0.36
0.35
4.40
1.35
2.29
3.94
Max.
1.60
0.56
0.48
0.44
4.60
1.83
2.60
4.25
Unit
A
B
Millimeter
Millimeter
Millimeter
Millimeter
Millimeter
Millimeter
Millimeter
Millimeter
Millimeter
Millimeter
Millimeter
B1
C
D
D1
E
H
e
1.50 BSC
3.00 BSC
e1
L
0.89
1.2
© Generalplus Technology Inc.
Proprietary & Confidential
11
JAN. 19, 2010
Version: 1.4
GPY0029B
7.2.2. 4-PIN Chip On Board (COB) bonding diagram
Pin: 4
(VIN)
Pin: 3
(VOUT)
1
2
3
4
GPY0029B / 29B-30
5
Pin: 1
Pin: 2
(GND)
(RESET)
7.3. Storage Condition and Period for Package
Package
Moisture sensitivity level
Max. Reflow temperature
Floor life storage condition
N/A
Dry pack
SOT
LEVEL 3
220 +5/-0℃
No
Note1: Please refer to IPC/JEDEC standard J-STD-020A and EIA JEDEC stand JFSD22-A112.
Note2: or refer to the “CAUTION Note” on dry pack bag.
7.4. Recommended SMT Temperature Profile
This “Recommended” temperature profile is a rough guideline for
SMT process reference. Most of GENERALPLUS lead-frame
base products choose Matte Tin and Sn/Bi for plating recipe. For
PPF (Pre-Plated Frame) product with 63/37 solder paste, we
recommend 240℃~245℃ for peak temperature.
© Generalplus Technology Inc.
Proprietary & Confidential
12
JAN. 19, 2010
Version: 1.4
GPY0029B
8. HTOL TEST RESULT
Package
Type
Check Point ( 168hrs; 500hrs; 1000hrs )
500hrs
168hrs
1000hrs
COB4
77pcs sample are all passed
77pcs sample are all passed
77pcs sample are all passed
77pcs sample are all passed
77pcs sample are all passed
77pcs sample are all passed
SOT89
Note1: Testing Conditions: VIN=5.0V, VOUT=3.3V, IOUT=150mA, Temp=125℃.
Note2: Testing Method: Reference to MIL-STD-883E method 1005.8.
Note3: COB Material: Hysol EO1016.
© Generalplus Technology Inc.
Proprietary & Confidential
13
JAN. 19, 2010
Version: 1.4
GPY0029B
9. DISCLAIMER
The information appearing in this publication is believed to be accurate.
Integrated circuits sold by Generalplus Technology are covered by the warranty and patent indemnification provisions stipulated in the
terms of sale only. GENERALPLUS makes no warranty, express, statutory implied or by description regarding the information in this
publication or regarding the freedom of the described chip(s) from patent infringement. FURTHERMORE, GENERALPLUS MAKES NO
WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY PURPOSE. GENERALPLUS reserves the right to halt production or alter
the specifications and prices at any time without notice. Accordingly, the reader is cautioned to verify that the data sheets and other
information in this publication are current before placing orders. Products described herein are intended for use in normal commercial
applications. Applications involving unusual environmental or reliability requirements, e.g. military equipment or medical life support
equipment, are specifically not recommended without additional processing by GENERALPLUS for such applications. Please note that
application circuits illustrated in this document are for reference purposes only.
© Generalplus Technology Inc.
Proprietary & Confidential
14
JAN. 19, 2010
Version: 1.4
GPY0029B
10. REVISION HISTORY
Date
Revision #
Description
Page
1. Modify Block Diagram in section 4.
3
4
8
JAN. 19, 2010
JUN. 29, 2007
1.4
1.3
2. Modify Signal Descriptions in section 5.1. and 5.3.
3. Modify Application Circuit in section 6.4.
1. Modify Ordering Information in section 7.2.
9
1. Modify the diagram in section 5.3.
4
5
2. Add VOUT = 3.0V specification in section 6.2.
3. Modify the diagram in section 6.4.1 and 6.4.2.
4. Modify Order Information in section 7.2.
JUN. 20, 2007
1.2
7
9
5. Modify HTOL TEST RESULT in section 8.
1. Modify the figure in section 6.3.2.
12
6
DEC. 26, 2006
NOV. 15, 2006
1.1
1.0
2. Add “4 PIN Chip On Board (COB) Bonding Diagram” in section 7.3.2.
11
Original
14
© Generalplus Technology Inc.
Proprietary & Confidential
15
JAN. 19, 2010
Version: 1.4
相关型号：
©2020 ICPDF网 联系我们和版权申明