960ACDR [GAPTEC]
960W - Single Output AC-DC Converter - Universal Input - Isolated & Regulated Industrial DIN Rail Power Supply;
| 型号： | 960ACDR |
| 厂家： | 
GAPTEC |
| 描述： | 960W - Single Output AC-DC Converter - Universal Input - Isolated & Regulated Industrial DIN Rail Power Supply |
| 文件： | 总5页 (文件大小：1969K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
960ACDR_SC Series
960W - Single Output AC-DC Converter - Universal Input - Isolated & Regulated
Industrial DIN Rail Power Supply
AC-DC Converter
960 Watt
High efficiency up to 94%
Universal AC input range
(85~264VAC)
Over voltage protection (OVP)
Over load protection (OLP)
Short circuit protection (SCP)
Over temperature prot. (OTP)
Wide operating ambient
temperature (-25°C~70°C)
150% (360W) peak load
capacity
The 960ACDR_SC series features standard rail mounting, energy efficiency
and is highly cost-effective. The series offers stability and high noise
immunity especially for industrial control equipment, machinery and
other demanding environments for industrial equipment. This converter
offers a compact and light weight design with and standard rail installation
(32mm). Furthermore this series offers Easy Fuse Tripping due and a
built-in DC OK relay contact. The converter can be installed on TS-35/7.5
or TS-35/15.
Support 1+1 or N+1
redundant system
Built-in current sharing
function
Built-in current limiting circuit
Easy fuse tripping due to high
overload current
Common specifications
Short circut protection:
Temperature rise at full load:
Cooling:
Input specifications
Long-term mode, automatic recovery
40ꢀC MAX
Input voltage range
Input frequency
Power factor
85~264VAC, 220-370VDC
47~63Hz
100VAC
• 0.99 (typ)
230VAC
• 0.98 (typ)
Free air convection
-25ꢀC~+70ꢀC
Operation temperature range:
Storage temperature range:
Storage humidity range:
Temperature coefficient:
MTBF (using MIL-HDBK-217F):
Safety standards:
AC current
100VAC
• 11A (max)
230VAC
• 5A (max)
-40ꢀC ~+85ꢀC
< 95%
Inrush current
Leakage current
Cold start
100VAC
• 30A (typ)
230VAC
• 60A (typ)
0.03%/ꢀC MAX
≤1.18mA/2.82mA TN- TT-mains/IT-
mains (264Vac input, 50Hz)
+25ꢀC >300,000 hours
meet UL508, UL60950, EN60950
150% of rated current
support
Power boost:
Output specifications
Item
Test conditions
Full load
Min Typ
Max
3
Units
%
Parallel function:
Output voltage
accuracy
DC-OK:
V On: when output voltage is up to 90%
of rated output voltage
V Off: when output voltage is down to
85% of rated output voltage
Voltage adjustment 24~28V
range
DC-OK relay contact rating:
Max 30V/1A or 60V/0.3A or 30Vac/0.3A
resistive load
Line regulation
Load regulation
0.5
1
%
%
DC-OK LED:
Green
Ripple + Noise
Set-up time
see model specifications table
Over load LED:
Red, when output voltage goes down
to 85% of rated voltage, overload LED
flickers.
• @230VAC
• @100VAC
1
s
s
2
When output voltage goes up to 90% of
rated voltage, overload LED goes out.
Hold-up time
@230VAC, full load
20
ms
%
Overshoot and
undershoot
5
Shut down signal:
Remote shut down output voltage
Remote control output voltage:
Case material:
Remote control/adjust output voltage
Switching frequency
100
KHz
Heat-resistant Plastic (UL94-V0) and
metal
Protection specifications
Dimensions (L*W*H):
Weight:
140*124.6*138.2mm
2500g
Over-load
protection
110%~150% of rated current, constant current limiting for
some time (150% of rated current, last 3S) then PS
stop working for 7S, after 7S, if the load <=rated current,
PS will work normally, auto recovery
Example:
960ACDR_24SC
Over-voltage
protection
29~33V, hiccup mode, auto recovery
Over-temperature
protection
115 5ꢀC, detect on temperature controller; shut down
O/P, auto recovery after temperature goes down.
960= 960 Watts
AC= AC/DC
DR= Din Rail
24= Vout
S= Single Output
C= PFC (Power Factor Correction)
Isolation specifications
Item
Test condition
Min
Typ
Max
Units
VAC
Withstand voltage*
• Primary-Sec. ≤20mA
• Primary-PG ≤20mA
• Secondary-PG ≤40mA
3000
2500
500
Note:
1. All parameters NOT specially mentioned are measured at rated input, rated load
and 25ꢀC of ambient temperature.
Isolation resistance
10
MΩ
* Input-Output, tested for 1 minute, 500VDC and leakage current less than 1mA
Page 1 of 5
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
960ACDR_SC – Rev. 2017-1.1
Specifications subject to change without notice.
960ACDR_SC Series
960W - Single Output AC-DC Converter - Universal Input - Isolated & Regulated
Industrial DIN Rail Power Supply
EMC specifications
EMC / Emission
Compliance to EN55022, EN55024, FCC PART 15 Class A
Compliance to EN61000-3-2, CLASS A
EMC / Harmonic current
EMC / Immunity
Compliance to EN61000-4-2, -3, -4, -5, -6, -11; heavy industry level
The power supply is considered as a component which will be installed into a final equipment.
The final equipment must be re-confirmed that it still meets EMC directives.
Approval
Model
Power
[W]
Output
[Vo, VDC]
Rated Current
[A]
Current Range
[A]
Ripple&Noise* [mV, max]
Efficiency
[%, typ]
0~70ꢀC
-25ꢀC
UL (pending)
960ACDR_24SC
960
24
40
0~40
240
480
94.4
* Measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1 uF & 10uF parallel capacitor.
Mechanical dimensions
960ACDR_SC
LED light
LED
DC OK Relay contact
Normal condition
During extra power
Overload(Hiccup mode)
Short circuit
Green
On
On
Off
Off
Off
Green
Red, flicker
Red, flicker
Red, flicker
Over temp. shut down
Active remote shut down Red, flicker
input
Off
Off
No input
OFF
Page 2 of 5
960ACDR_SC – Rev. 2017-1.1
Specifications subject to change without notice.
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
960ACDR_SC Series
960W - Single Output AC-DC Converter - Universal Input - Isolated & Regulated
Industrial DIN Rail Power Supply
Shut down signal input
This function allows a signal or external voltage to shut down output voltage.
Under shut down condition, output voltage<2V and output power<0.5W.
When parallel using, the voltage must be <1V between V- terminal blocks of
different units.
Mark: if select C, please don’t use limited diodes.
Remote control output voltage
This function can adjust output voltage, type: 18~28Vdc.
Input/output terminal
DC-OK,shut-down
Type
Spring connector
0.5-6mm2
0.5-4mm2
AWG20-10
2.8mm
Spring connector
Solid wire
0.15-1.5mm2
0.15-1.5mm2
Strand wire
Wire Spec
AWG26-14
Max wire diameter
Stripping length
Screwdriver
1.5mm
7mm
7mm
/
3mm Straight Screwdriver (open spring)
Page 3 of 5
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
960ACDR_SC – Rev. 2017-1.1
Specifications subject to change without notice.
960ACDR_SC Series
960W - Single Output AC-DC Converter - Universal Input - Isolated & Regulated
Industrial DIN Rail Power Supply
Typical characteristics
Output current vs. ambient temperature – 960ACDR_24SC
Ambient temperature (ꢀC)
Functional block diagram
Functional diagram
Page 4 of 5
960ACDR_SC – Rev. 2017-1.1
Specifications subject to change without notice.
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
960ACDR_SC Series
960W - Single Output AC-DC Converter - Universal Input - Isolated & Regulated
Industrial DIN Rail Power Supply
Mounting method instruction
960ACDR_24SC
A1 is recommended output current.
A2 is the allowed max output current (PSU lifetime is around half of A1).
Mounting A
Mounting B
Mounting C
Mounting D
Mounting E
Page 5 of 5
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
960ACDR_SC – Rev. 2017-1.1
Specifications subject to change without notice.
相关型号：
960ACDR_24SC
960W - Single Output AC-DC Converter - Universal Input - Isolated & Regulated Industrial DIN Rail Power Supply
GAPTEC
960ACDR_SC
960W - Single Output AC-DC Converter - Universal Input - Isolated & Regulated Industrial DIN Rail Power Supply
GAPTEC
©2020 ICPDF网 联系我们和版权申明