首页 |元器件品牌

60DAW4_2412D1.6 [GAPTEC]

60W - Single/Dual Output - Wide Input - Isolated & Regulated;
60DAW4_2412D1.6
型号： 60DAW4_2412D1.6
厂家： GAPTEC    GAPTEC
描述：

60W - Single/Dual Output - Wide Input - Isolated & Regulated
文件： 总5页 (文件大小：1265K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
60DAW4_1.6 Series  
60W - Single/Dual Output - Wide Input - Isolated & Regulated  
DIP DC-DC Converter  
DC-DC Converter  
60 Watt  
The 60DAW4_1.6 series offers 60W of output, wide input voltage of  
9-36VDC, 18-75VDC and features 1600VDC isolation, six-sided metal  
shield over current and short circuit protection.  
High efficiency up to 93%  
4:1 wide input voltage range  
Isolation voltage 1600VDC  
Six-sided metal shield  
Short circuit protection (SCP)  
(automatic recovery)  
Operating temperature:  
-40°C to +85°C  
Over temperature protection  
Industry standard pinout  
Under voltage lockout  
All models are particularly suited to industry control systems, semicon-  
ductor equipment, wireless network, telecom/datacom, measurement  
etc.  
Common specifications  
Cooling:  
Output specifications  
Nature convection  
Item  
Test condition  
Min Typ  
Max  
1
Units  
ꢀ
Short circuit protection:  
Operation temperature range:  
Storage temperature range:  
Case temperature:  
Continuous, auto-recovery  
-40°C~+100°C  
Voltage accuracy  
External trim adj.  
range  
of output  
10  
ꢀ
-55°C~+125°C  
Over load  
protection  
Input voltage range  
150  
ꢀIo  
110°C  
Lead temperature range:  
260°C MAX, 1.5mm from case for 10 sec  
Line regulation  
0.5  
ꢀ
Thermal impedance:  
(Mounting at FR4 (5.9*2.75inch% PCB%  
without heatsink: 9.5°C/W, min.  
with heatsink: 8.5°C/W, min.  
Load regulation  
(0ꢀ-100ꢀ%  
• Single  
• Dual  
0.5  
1
ꢀ
ꢀ
Switching frequency:  
Humidity:  
225kHz TYP  
Cross regulation  
Ripple and noise  
Dual, 25ꢀ-100ꢀ load  
5
ꢀ
non-condensing, 5ꢀ-95ꢀ MAX  
Copper  
20MHz Bandwidth, 1.0µF  
ceramic capacitor  
100  
mVpk-pk  
Case material:  
Over voltage  
protection  
(Zener diode  
clamp%  
• 5VDC  
• 12VDC  
• 15VDC  
6.2  
15  
20  
V
V
V
Potting material:  
Design meets safety:  
MTBF (MIL-HDBK-217F @25°C%:  
Weight:  
Epoxy (UL94V-0 rated%  
IEC60950-1/EN60950-1  
>210,000 hours  
45g  
Over load  
protection  
of Iout  
120~  
140  
ꢀ
Temperature  
coefficient  
0.02  
ꢀ/°C  
µs  
Input specifications  
Transient recovery 25ꢀ load step change  
time  
250  
Item  
Test condition  
Min  
Typ  
Max  
Units  
Transient response 25ꢀ load step change  
deviation  
3
ꢀ
Under voltage lockout • 24Vin  
8.6/7.9  
17.8/16  
VDC  
VDC  
Module ON/OFF  
Start-Up time1%  
Filter  
• 48Vin  
60  
mS  
Isolation specifications  
Pi type  
Item  
Test condition  
for 10 seconds  
Test at 500VDC  
Min  
Typ  
Max  
Units  
VDC  
MΩ  
pF  
Input reflected ripple  
current2%  
Nominal Vin  
and full load  
20  
mAp-p  
Isolation voltage  
Isolation resistance  
Isolation capacitance  
1600  
Remote ON/OFF3%  
• ON  
• OFF  
• Off idle current  
3.0 ... 12VDC or open circuit  
0 ... 1.2VDC or Short circuit pins 2, 3  
mA  
1000  
5
2200  
1% Nominal Vin and constant resistive load  
2% Measured with a simulated source inductance of 1µH  
3% The ON/OFF control pin is referenced to -Vin (pin2%.  
Note:  
Model selection:  
1. Input voltage can’t exceed this value, or will cause the permanent damage.  
2. The load shouldn‘t be less than 5ꢀ, otherwise ripple will increase dramatically.  
3. Max. Capacitive Load is tested on Vin-nominal and full load.  
4. All specifications measured at Ta=25°C, humidity<75ꢀ, nominal input voltage  
and rated output load unless otherwise specified.  
5. In this datasheet, all the test methods of indications are based on corporate  
standards.  
6. Only typical models listed, other models may be different, please contact our  
technical person for more details.  
WCTV_xxyyN##  
W= Watt; C=Case; T= Type; V= Voltage Variation (omitted 10ꢀ%;  
xx= Vin; yy= Vout; N= Numbers of Output; ##= Isolation (kVDC%  
Example:  
60DAW4_2415S1.6  
60= 60Watt; D= DIP; A= series; W4= wide input (4:1) 9-36Vin;  
15Vout; S= single output; 1.6= 1600VDC  
7. Specifications subject to change without notice.  
Page 1 of 5  
60DAW4_1.6 – Rev. 2017-1.0  
GAPTEC-Electronic GmbH & Co. KG  
sales@gaptec-electronic.com – www.gaptec-electronic.com  
Specifications subject to change without notice.  
60DAW4_1.6 Series  
60W - Single/Dual Output - Wide Input - Isolated & Regulated  
DIP DC-DC Converter  
EMC specifications  
Radiated emissions*  
Conducted emissions*  
ESD  
EN55032 Class A  
EN55032 Class A  
IEC/EN61000-4-2  
Air  
8KV  
perf. Criteria A  
RS  
IEC/EN61000-4-3  
10V/m  
perf. Criteria A  
EFT  
IEC/EN61000-4-4  
IEC/EN61000-4-5  
IEC/EN61000-4-6  
IEC/EN61000-4-8  
2KV  
perf. Criteria B  
perf. Criteria B  
perf. Criteria A  
perf. Criteria A  
Surge  
CS  
1KV  
10 Vr.m.s  
10 Vr.m.s  
PFMF  
* The 60DAW4_1.6 series can meet EN55032 Class A with an external filter in parallel with the input pins.  
** An external filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5.  
Part Number  
Input Voltage Range  
[VDC]  
Input current [mA, typ]  
Output Voltage  
[VDC]  
Output Current  
[mA]  
Output Ripple &  
Noise [mVp-p, max.]  
Efficiency  
[%, Typ.]  
Capacitive load*  
[µF, max.]  
no load  
full load  
2703  
2703  
2688  
1344  
1351  
1344  
2747  
2747  
1373  
1373  
60DAW4_2405S1.6  
60DAW4_2412S1.6  
60DAW4_2415S1.6  
60DAW4_4805S1.6  
60DAW4_4812S1.6  
60DAW4_4815S1.6  
60DAW4_2412D1.6  
60DAW4_2415D1.6  
60DAW4_4812D1.6  
60DAW4_4815D1.6  
9-36  
9-36  
25  
5
12000  
5000  
4000  
12000  
5000  
4000  
2500  
2000  
2500  
2000  
100  
100  
100  
100  
100  
100  
100  
100  
100  
100  
92.5  
92.5  
93  
30000  
5850  
3900  
30000  
5850  
3900  
3900  
2400  
3900  
2400  
25  
12  
15  
5
9-36  
25  
18-75  
18-75  
18-75  
9-36  
25  
93  
25  
12  
15  
12  
15  
12  
15  
92.5  
93  
25  
40  
91  
9-36  
50  
91  
18-75  
18-75  
40  
91  
50  
91  
* Test by normal Vin and constant resistive load.  
Typical characteristics  
Temperature derating curves  
60DAW4_2405S1.6  
All other types  
60DAW4_4812D1.6, 60DAW4_4815D1.6  
Page 2 of 5  
GAPTEC-Electronic GmbH & Co. KG  
sales@gaptec-electronic.com – www.gaptec-electronic.com  
60DAW4_1.6 – Rev. 2017-1.0  
Specifications subject to change without notice.  
60DAW4_1.6 Series  
60W - Single/Dual Output - Wide Input - Isolated & Regulated  
DIP DC-DC Converter  
Test configurations  
Input reflected ripple current test step  
Output ripple & noise measurement test  
To reduce ripple and noise, it is recommended to use a 1µF  
ceramic disk capacitor and a 10µF ceramic disk capacitor  
at the output.  
Input reflected ripple current is measured though a source  
indicator Lin (1µH% and a source capacitor Cin (22µF,  
ESR<1.0Ω at 100KHz% at nominal input and full load.  
Design and feature configurations  
Over voltage protection  
Over current protection  
The module includes an internal output over voltage pro-  
tection circuit, which monitors the voltage on the output  
terminals. If this voltage exceeds the over voltage set point,  
the module will activate the control loop of internal circuit  
to clamp the output voltage.  
The module includes an internal over current protection  
circuit, which will endure current limiting for an unlimited  
duration during output over load condition. If the output  
current exceeds the OCP set point, the module will shut  
down autmatically (hiccup%.  
The module will restart after shut down. If the over load  
condition still exists, the module will shut down again.  
Over temperature protection  
The over temperature protection consists of circuitry that  
provides protection from thermal damage. If the tempera-  
ture exceeds the over temperature threshold the module will  
shut down.  
CTRL module ON/OFF  
Positive logic turns on the mofule during high logic and off  
during low logic. Ctrl module on/off can be controlled by an  
external switch between the ctrl terminal and -Vin terminal.  
The switch can be an open collector or open drain. For  
positive logic if the ctrl feature ist not used, please leave  
the ctrl pin floating.  
The module will try to restart after shut down. If the over  
temperature condition still exists during restart, the module  
will shut down again. This restart trial will continue until  
the temperature is within specification.  
EMI filter  
Input filter components (C1~C5, L1/L2% are used to help meet  
conducted emissions.  
These components should be mounted as close as possible to  
the module; and all leads should be minimized to decrease  
radiated noise.  
Single  
C1  
L1/L2  
12µH  
12µH  
C2  
C3  
C4  
C5  
60DAW4_24xx  
60DAW4_48xx  
1812, 4.7µF, 50V  
1812, 1.5µF, 100V  
1812, 4.7µF, 50V  
1812, 1.5µF, 100V  
1206, 470pF, 2KV  
1206, 470pF, 2KV  
1206, 1000pF, 2KV  
1206, 1000pF, 2KV  
1206, 1000pF, 2KV  
1206, 1000pF, 2KV  
Dual  
C1  
C2  
C3  
C4  
60DAW4_24xx  
60DAW4_48xx  
1812, 4.7µF, 50V  
1812, 1.5µF, 100V  
1812, 4.7µF, 50V  
1812, 1.5µF, 100V  
1206, 220pF, 2KV  
1206, 220pF, 2KV  
1206, 1500pF, 2KV  
1206, 1500pF, 2KV  
Page 3 of 5  
GAPTEC-Electronic GmbH & Co. KG  
sales@gaptec-electronic.com – www.gaptec-electronic.com  
60DAW4_1.6 – Rev. 2017-1.0  
Specifications subject to change without notice.  
60DAW4_1.6 Series  
60W - Single/Dual Output - Wide Input - Isolated & Regulated  
DIP DC-DC Converter  
Efficiency  
60DAW4_2405S1.6  
60DAW4_4812S1.6  
60DAW4_2412D1.6  
60DAW4_4815D1.6  
Mechanical dimensions  
Without heatsink  
External output trimming  
Output can be externally trimmed by using the method as  
below (single output models only%  
Top view  
PIN connections  
PIN  
1
Single  
+Vin  
Dual  
+Vin  
-Vin  
2
-Vin  
3
CTRL  
+Vout  
-Vout  
Trim  
CTRL  
+Vout  
Com  
Note:  
Unit: mm[inch]  
Pin diameter: 1.0 0.05mm [0.04 0.002inch]  
Pin pitch and length tolerance: 0.35mm [ 0.014inch]  
Case tolerance: 0.5mm [ 0.02inch]  
4
5
6
-Vout  
Stand-off tolerance: 0.1mm [ 0.004inch]  
Page 4 of 5  
60DAW4_1.6 – Rev. 2017-1.0  
Specifications subject to change without notice.  
GAPTEC-Electronic GmbH & Co. KG  
sales@gaptec-electronic.com – www.gaptec-electronic.com  
60DAW4_1.6 Series  
60W - Single/Dual Output - Wide Input - Isolated & Regulated  
DIP DC-DC Converter  
Mechanical dimensions with heatsink  
With heatsink  
Note:  
Material: Aluminium  
Finish: Anodic treatment (black%  
Weight: 11g (without converter%  
Converters will be supplied with heat-sinks already  
mounted. Please contact factory for quotation.  
Page 5 of 5  
GAPTEC-Electronic GmbH & Co. KG  
60DAW4_1.6 – Rev. 2017-1.0  
sales@gaptec-electronic.com – www.gaptec-electronic.com  
Specifications subject to change without notice.  

相关型号：

60DAW4_2412S1.6

 60W - Single/Dual Output - Wide Input - Isolated & Regulated
GAPTEC

60DAW4_2415D1.6

 60W - Single/Dual Output - Wide Input - Isolated & Regulated
GAPTEC

60DAW4_2415S1.6

 60W - Single/Dual Output - Wide Input - Isolated & Regulated
GAPTEC

60DAW4_4805S1.6

 60W - Single/Dual Output - Wide Input - Isolated & Regulated
GAPTEC

60DAW4_4812D1.6

 60W - Single/Dual Output - Wide Input - Isolated & Regulated
GAPTEC

60DAW4_4812S1.6

 60W - Single/Dual Output - Wide Input - Isolated & Regulated
GAPTEC

60DAW4_4815D1.6

 60W - Single/Dual Output - Wide Input - Isolated & Regulated
GAPTEC

60DAW4_4815S1.6

 60W - Single/Dual Output - Wide Input - Isolated & Regulated
GAPTEC

60DAW_1.6

 60W - Single Output - Wide Input - Isolated & Regulated
GAPTEC

60DAW_2403S1.6

 60W - Single Output - Wide Input - Isolated & Regulated
GAPTEC

60DAW_2405S1.6

 60W - Single Output - Wide Input - Isolated & Regulated
GAPTEC

60DAW_2412S1.6

 60W - Single Output - Wide Input - Isolated & Regulated
GAPTEC
©2020 ICPDF网 联系我们和版权申明