2S8W_1205D3RP [GAPTEC]
2W - Dual/Single Output - Wide Input - Isolated & Regulated;型号: | 2S8W_1205D3RP |
厂家: | GAPTEC |
描述: | 2W - Dual/Single Output - Wide Input - Isolated & Regulated |
文件: | 总4页 (文件大小:849K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
2S8W_1RP series
2W - Dual/Single Output - Wide Input - Isolated & Regulated
DC-DC Converter
DC-DC Converter
2 Watt
8 Pin SIL
Operating Temperature
Range: -40°C to +85°C
Continuous Short Circuit
Protection (SCP)
The 2S8W_1RP series is a family of cost effective 2W single & dual
output DC-Dc converters, specially designed for applications where
a wide range input voltage power supplies are isolated from the input
power supply in a distributed power supply system on a circuit board.
Wide 2:1 input voltage range
Efficiency up to 80%
2W Single and Dual outputs
I/O Isolation 1kVDC and
3kVDC Option
Remote ON/OFF Control
These products apply to:
1) Where the voltage of the input power supply is wide range
(voltage range ≤2:1)
2) Where isolation is necessary between input and output (isolation
voltage ≤1000VDC/3000VDC)
3) Where the regulation of the output voltage and the output ripple
noise are demanded
UL-60950-1 (E347551)
Common specifications
Short circuit protection:
Temperature rise at full load:
Cooling:
Output specifications
Continuous
Item
Test condition
Min
Typ
2
Max
Units
%
15°C TYP
Output voltage
accuracy
Nominal Vin and full
load
Free air convection
-40°C~+85°C
Line regulation
Vin=min to max,full
load
0.5
1
%
Operation temperature range:
Operating case temperature:
Storage temperature range:
Storage humidity range:
Soldering temperature:
Switching frequency:
Temperature coefficient:
Operating Frequency:
Case material:
100°C max.
Load regulation
Cross regulation*
20% to 100% full load
Dual output
%
-40°C ~+125°C
5
%
< 95%
Output Ripple &
Noise
20MHz Bandwidth
80
mVp-p
260°C max, 1.5mm from case for 10 sec
100~650kHz
* One load is 25% to 100% load, ther other load is 100% load, the output voltage
variable rate is within 5%.
0.02%/°C typ.
150kHz min.
EMC specifications
Non-conductive black plastic [UL94-V0]
Epoxy [UL94-V0]
>1.61 Mhours
Radiated emissions
EN55032
EN55032
CLASS A
CLASS A
Potting material:
Conducted emissi-
ons*
MTBF (MIL-HDBK-217F):
Safety standard:
IEC/EN 60950-1
Plastic case: 4.5g (SIP)
ESD
IEC61000-4-2
IEC61000-4-3
IEC61000-4-4
IEC61000-4-5
IEC61000-4-6
IEC61000-4-8
Perfect criteria B
Perfect criteria A
Perfect criteria B
Perfect criteria B
Perfect criteria A
Perfect criteria A
Weight:
RS
EFT**
Surge**
CS
Input specifications
Item
Test condition
Min
Typ
35
Max
Units
PFMF
Input filter
Capacitor
* Input filter components are required to help meet conducted emission Class A,
which application refer to the EMI filter of design & test configuration.
** An external filter capacitor is required if the module has to meet IEC61000-4-4
and IEC61000-4-5.
Input reflected ripple
current*
mA pk-pk
Input surge voltage
• 5VDC
12
VDC
VDC
VDC
VDC
• 12VDC
• 24VDC
• 48VDC
24
40
80
Example:
2S8W_0505S1RP
2 = 2Watt; S8 = SIP8; W = wide input (2:1); 4,5 - 9Vin; 5Vout;
S = Single Output; 1 = 1000VDC isolation; R = Regulated Output
P = Short Circuit Protection
* Measured input reflected ripple current with a simulated source inductance of
12µH.
Isolation specifications
Item
Test condition
Min
Typ
Max
Units
VDC
Note:
Isolation voltage
Tested for 1 second
1000
and
3000
1. All specifications measured at Ta = 25°C, humidity <75%, nominal input voltage
and rated output load unless otherwise specified.
2. Capacitive load: test by nominal input voltage and constant resistor load.
3. Exceeding the absolut ratings of the unit could cause damage. It is not allowed
for continuous operating.
4. In this datasheet, all the test methods of indications are based on corporate
standards.
Metal case
Input & output
1000
1000
VDC
MΩ
Isolation resistance
500VDC, input to
output
Isolation capacitance 100KHz
60
pF
Page 1 of 4
2S8W_1RP – Rev. 2020-1.2
Specifications subject to change without notice.
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
2S8W_1RP series
2W - Dual/Single Output - Wide Input - Isolated & Regulated
DC-DC Converter
Part Number
Input Voltage
[V]
Input Current
[mA, typ]
Output Voltage
[VDC]
Output Current
[mA, max]
Efficiency
[%, typ]
Capacative Load
[µF, max]
2S8W_xx03SXRP
2S8W_xx05SXRP
2S8W_xx09SXRP
2S8W_xx12SXRP
2S8W_xx15SXRP
2S8W_xx24SXRP
2S8W_xx03DXRP
2S8W_xx05DXRP
2S8W_xx09DXRP
2S8W_xx12DXRP
2S8W_xx15DXRP
2S8W_xx24DXRP
4.5-9, 9-18, 18-36, 36-72
4.5-9, 9-18, 18-36, 36-72
4.5-9, 9-18, 18-36, 36-72
4.5-9, 9-18, 18-36, 36-72
4.5-9, 9-18, 18-36, 36-72
4.5-9, 9-18, 18-36, 36-72
4.5-9, 9-18, 18-36, 36-72
4.5-9, 9-18, 18-36, 36-72
4.5-9, 9-18, 18-36, 36-72
4.5-9, 9-18, 18-36, 36-72
4.5-9, 9-18, 18-36, 36-72
4.5-9, 9-18, 18-36, 36-72
492, 205, 98, 48
571, 216, 108, 56
555, 213, 104, 53
555, 208, 104, 53
547, 213, 104, 53
533, 208, 104, 52
471, 188, 94, 47
571, 222, 106, 56
540, 210, 105, 53
533, 208, 104, 53
533, 210, 104, 52
563, 219, 106, 55
3.3
5
500
400
222
167
133
83
67-71
70-77
72-80
72-80
73-80
75-80
70-73
70-78
74-79
75-80
75-80
71-78
3300
3300
470
9
12
15
24
3.3
5
470
470
220
250
200
111
1000
1000
220
9
12
15
24
83
220
67
220
42
100
• X=1 = 1kVDC or X=3 = 3kVDC
• xx=Input Voltage (possible for other input and output voltage combinations on request)
Vin=4.5-9V, xx=05
Vin=9-18V, xx=12
Vin=18-36V, xx=24
Vin=36-72V, xx=48
Typical characteristics
Remote On/Off (CTRL)
MCU (Master cotrol unit)
The MCU pin voltage is referenced to -Vin (Pin 1)
ON: 0~0.8VDC max.
(Short circuit pin 1 and pin 3) or open circuit
OFF: 4.5 to 15VDC max.
(or 3.5mA to 15mA max.) (via R1, D1)
OFF idle current: 5mA typ.
Page 2 of 4
2S8W_1RP – Rev. 2020-1.2
Specifications subject to change without notice.
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
2S8W_1RP series
2W - Dual/Single Output - Wide Input - Isolated & Regulated
DC-DC Converter
Typical characteristics
Lo line
Nominal
Hi line
Lo line
Nominal
Hi line
Lo line
Nominal
Hi line
Test configurations
Input reflected ripple current test step
EMI filter
Input reflected ripple current ist measured through a source indica-
tor Lin (12µH) and a source capacitor Cin (47µF, ESR<1.0Ω at 100kHz)
at nominal input and full load.
Input filter components (C1, L) are used to help meet conducted
emissions requirement for the module. These components should be
mounted as close as possible to the module; and all leads should be
minimized to decrease radiated noise.
C1
L
Output ripple & noise measurement test
The scope measurement bandwidth is 20MHz.
2S8W_RP
100µF/100V
12µH
Page 3 of 4
2S8W_1RP – Rev. 2020-1.2
Specifications subject to change without notice.
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
2S8W_1RP series
2W - Dual/Single Output - Wide Input - Isolated & Regulated
DC-DC Converter
Mechanical specifications
Pin number
Single
-Vin
Dual
-Vin
1
2
3
5
6
7
8
+Vin
N.P.
+Vin
N.C.
2S8W_RP
N.P.
N.C.
+Vout
-Vout
N.C.
+Vout
Common
-Vout
With control pin:
Pin number
Single
-Vin
Dual
-Vin
1
2
3
+Vin
+Vin
Remote On/
Off
Remote On/
Off
5
6
7
N.C.
+Vout
-Vout
N.C.
N.C.
+Vout
Common
-Vout
8
(The pin connections of high isolation are the same
as with the normal one)
Page 4 of 4
2S8W_1RP – Rev. 2020-1.2
Specifications subject to change without notice.
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
相关型号:
©2020 ICPDF网 联系我们和版权申明