15DMW4_D [GAPTEC]

15W - Single/Dual Output - Wide Input - Isolated & Regulated;
15DMW4_D
型号: 15DMW4_D
厂家: GAPTEC    GAPTEC
描述:

15W - Single/Dual Output - Wide Input - Isolated & Regulated

文件: 总3页 (文件大小:463K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
15DMW4_S & 15DMW4_D Series  
15W - Single/Dual Output - Wide Input - Isolated & Regulated  
1“ x 1“ DC-DC Converter  
DC-DC Converter  
15 Watt  
The 15DMW4_S & 15DMW4_D series are isolated 15W DC/DC conver-  
ters. Designed with high efficiency, they allow the operating temperature  
range of these units to be -40°C to +85°C (with derating) in a 6 pin DIP  
package with industry-standard footprint. Further features include wide  
4:1 input voltage range, remote on/off control, trimmable output, short-  
circuit protection and over voltage protection.  
Wide 4:1 input voltage range  
High efficiency up to 88%  
Remote On/Off  
Input/output isolation voltage:  
1.5K VDC  
Operating temperature range:  
-40°C to +85°C  
100% burned in  
15W DIL package  
RoHS compliant  
Short circuit protection (SCP)  
Customer design available  
These converters are well suitable for battery operated equipment, mea-  
surement equipment, telecom, wireless network, Industry control sys-  
tem, everywhere where isolated, tightly regulated voltages and compact  
size are required.  
Common specifications  
Short circuit protection:  
Cooling:  
Input specifications  
Hiccup, continuous, automatic recovery  
Free air convection  
-40°C~+85°C (with derating)  
-55°C~+125°C  
Item  
Test condition  
Pi Type  
Min  
Typ  
Max  
Units  
Input filter  
Protection  
Starting voltage  
Operation temperature range:  
Storage temperature range:  
Maximum case temperature:  
Switching frequency (fixed):  
Storage humidity range:  
Case material:  
Fuse recommended  
• 24VDC input  
• 48VDC input  
8.7  
16.9  
9
18  
VDC  
VDC  
105°C MAX  
Under-voltage turn-off • 24VDC input  
• 48VDC input  
8.3  
16.2  
9
18  
VDC  
VDC  
400kHz TYP  
95ꢀ MAX  
Surge voltage  
(100msec. max.)  
• 24VDC input  
• 48VDC input  
50  
100  
V
V
Nickel-coated copper (six-sided)  
Non-conductive FR4  
Epoxy (UL94V-0)  
Remote ON/OFF  
• Converter: ON  
• Converter: OFF  
Open or 3.0V<Vr<15V  
Base material:  
Short circuit pin 6 and pin 2  
or 0V<Vr<1.2V  
Potting material:  
• Off idle current  
2.5  
mA  
MTBF (MIL-HDBK-217F @25°C):  
Weight:  
560,000 hours  
Reflected input ripple  
current  
30  
mA  
16.5g  
Conducted noise  
(input)  
EN 55022 level A, FCC part 15, level A with  
external capacitor  
Isolation specifications  
Output specifications  
Item  
Test condition  
Input to output  
Test at 500VDC  
Min  
Typ  
Max  
Units  
Item  
Test condition  
Min  
Typ  
Max  
2
Units  
Isolation voltage  
Isolation resistance  
Isolation capacitance  
1500 VDC  
Voltage tolerance  
Line regulation  
Load regulation  
1000  
MΩ  
Vmin - Vmax  
0.5  
1000  
pF  
• 25ꢀ load to full load  
• Balanced load (dual)  
0.5  
1
Model selection:  
WCTV_xxyyN##  
Load variation  
Dual models  
unbalanced load  
5
W= Watt; C=Case; T= Type; V= Voltage Variation (omitted 10ꢀ);  
xx= Vin; yy= Vout; N= Numbers of Output; ##= Isolation (kVDC)  
Output voltage  
adjustment range  
only for single output  
models  
10  
Example:  
15DMW4_2415S1.5  
15= 15Watt; D= DIP; M=series; W4= wide input (4:1) 9-36Vin;  
15Vout; S= single output; 1.5=1500VDC  
Temperature drift  
Ripple and noise  
Vout  
0.02 ꢀ/°C  
20MHz Bandwidth  
100  
mVp-p  
Output current  
limitation  
at 150 ꢀ typ.of Iout  
max., constant current  
Transient response 25ꢀ load step change  
setting time  
300  
µs  
Note:  
1. Only typical model listed. Non-standard models will be different from the above,  
please contact us for more details.  
Transient response di/dt=0.8A/µs  
over shoot  
5ꢀ of Vo  
(6ꢀ for 3.3Vout)  
2. All specifications are measured at TA=25°C, humidity<75ꢀ, nominal input  
voltage and rated output load unless otherwise specified.  
3. In this datasheet, all the test methods of indications are based on corporate  
standards.  
Start-up time  
Nominal Vin and  
450  
ms  
constant resistive load  
Over load  
protection  
ꢀ of full load at  
nominal input  
110  
Over voltage  
protection  
• 3.3V output  
• 5V output  
• 12V output  
• 15V output  
3.7  
5.6  
13.5  
16.8  
5.4  
7
19.6  
20.5  
VDC  
VDC  
VDC  
VDC  
Page 1 of 3  
GAPTEC-Electronic GmbH & Co. KG  
sales@gaptec-electronic.com – www.gaptec-electronic.com  
15DMW4_S & 15DMW4_D – Rev. 2016-1.0  
Specifications subject to change without notice.  
15DMW4_S & 15DMW4_D Series  
15W - Single/Dual Output - Wide Input - Isolated & Regulated  
1“ x 1“ DC-DC Converter  
Part Number  
Input Voltage [VDC]  
Output Voltage [VDC]  
Output Current [mA]  
Input Current [mA]  
Efficiency [%, Typ.]  
Capacitive load  
F, Max.]  
Nominal  
Range  
Full load  
No load  
Full load  
639  
718  
710  
710  
319  
359  
355  
355  
710  
710  
355  
355  
15DMW_2403S1.5  
15DMW_2405S1.5  
15DMW_2412S1.5  
15DMW_2415S1.5  
15DMW_4803S1.5  
15DMW_4805S1.5  
15DMW_4812S1.5  
15DMW_4815S1.5  
15DMW_2412D1.5  
15DMW_2415D1.5  
15DMW_4812D1.5  
15DMW_4815D1.5  
24  
24  
24  
24  
48  
48  
48  
48  
24  
24  
48  
48  
9-36  
3.3  
5
4000  
3000  
1250  
1000  
4000  
3000  
1250  
1000  
625  
50  
86  
87  
88  
88  
86  
87  
88  
88  
88  
88  
88  
88  
1000  
1000  
330  
9-36  
40  
9-36  
12  
15  
3.3  
5
20  
9-36  
20  
220  
18-75  
18-75  
18-75  
18-75  
9-36  
30  
1000  
1000  
330  
40  
12  
15  
12  
15  
12  
15  
10  
10  
220  
20  
150  
9-36  
500  
20  
100  
18-75  
18-75  
625  
10  
150  
500  
10  
100  
Typical characteristics  
Output voltage adjustment  
Control pin suggest circuit  
Page 2 of 3  
GAPTEC-Electronic GmbH & Co. KG  
sales@gaptec-electronic.com – www.gaptec-electronic.com  
15DMW4_S & 15DMW4_D – Rev. 2016-1.0  
Specifications subject to change without notice.  
15DMW4_S & 15DMW4_D Series  
15W - Single/Dual Output - Wide Input - Isolated & Regulated  
1“ x 1“ DC-DC Converter  
EMC considerations  
Suggested Schematic to comply with EN55022 Conducted Noise emission Class B  
Following components are needed to comply with EN55022 Class B conducted noise:  
15DMW_24xxS1.5  
Component  
C2, C3  
C5, C6  
L1  
Value  
6.8µF  
Voltage  
50V  
Reference  
1812 MLCC  
1000pF  
325µH  
2KV  
1206 MLCC  
Common Mode Choke  
15DMW_48xxS1.5  
Component  
C2, C3, C4  
C5, C6  
Value  
2.2µF  
Voltage  
100V  
2KV  
Reference  
1812 MLCC  
Recommended Layout with input Filter  
1000pF  
325µH  
1206 MLCC  
L1  
Common Mode Choke  
Mechanical dimensions  
Note:  
Unit: mm  
General tolerances: 0.5mm  
Pin size tolerances: 0.35mm  
Pin connection  
Pin  
Single  
Dual  
1
2
3
4
5
6
+Vin  
+Vin  
-Vin  
-Vin  
+Vout  
+Vout  
Trim  
-Vout  
-Vout  
Ctrl On/Off  
Ctrl On/Off  
COM  
Page 3 of 3  
GAPTEC-Electronic GmbH & Co. KG  
sales@gaptec-electronic.com – www.gaptec-electronic.com  
15DMW4_S & 15DMW4_D – Rev. 2016-1.0  
Specifications subject to change without notice.  

相关型号:

15DMW4_S

15W - Single/Dual Output - Wide Input - Isolated & Regulated
GAPTEC

15DMWE

15W - Single Output - Wide Input - Isolated & Regulated
GAPTEC

15DMWE4

15W - Single Output - Wide Input - Isolated & Regulated
GAPTEC

15DMWE4-1.5

15W - Single Output - Wide Input - Isolated & Regulated
GAPTEC

15DMWE4_1.5

15W - Single Output - Wide Input - Isolated & Regulated
GAPTEC

15DMWE4_2403S1.5

15W - Single Output - Wide Input - Isolated & Regulated
GAPTEC

15DMWE4_2405D1.5

15W - Single Output - Wide Input - Isolated & Regulated
GAPTEC

15DMWE4_2405S1.5

15W - Single Output - Wide Input - Isolated & Regulated
GAPTEC

15DMWE4_2412D1.5

15W - Single Output - Wide Input - Isolated & Regulated
GAPTEC

15DMWE4_2412S1.5

15W - Single Output - Wide Input - Isolated & Regulated
GAPTEC

15DMWE4_2415D1.5

15W - Single Output - Wide Input - Isolated & Regulated
GAPTEC

15DMWE4_2415S1.5

15W - Single Output - Wide Input - Isolated & Regulated
GAPTEC