JS60MKV3 [FUJITSU]
POWER/SIGNAL RELAY, SPST, MOMENTARY, 0.005A (COIL), 60VDC (COIL), 290mW (COIL), 8A (CONTACT), 24VDC (CONTACT), THROUGH HOLE-STRAIGHT MOUNT, ROHS COMPLIANT;型号: | JS60MKV3 |
厂家: | FUJITSU |
描述: | POWER/SIGNAL RELAY, SPST, MOMENTARY, 0.005A (COIL), 60VDC (COIL), 290mW (COIL), 8A (CONTACT), 24VDC (CONTACT), THROUGH HOLE-STRAIGHT MOUNT, ROHS COMPLIANT 继电器 |
文件: | 总7页 (文件大小:231K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
POWER RELAY
1 POLE - 8A Medium Load Control
JS Series
n FEATURES
l UL class B (130°C) coil wire insulation
l 1 form A (SPST-NO) or 1 form C (SPDT) contact
l Low profile and space saving
- Height: 12.5 mm - Mounting space: 290 mm2
l High sensitivity in small package
- Operating power 110 to 140 mW
- Nominal power 220 to 290 mW
l High insulation in small package
- Insulation distance : 8.0 mm (between coil and contacts)
- Dielectric strength : 5,000 VAC - Surge strength : 10,000 V
l Plastic materials
- UL 94 flame class V-0 - UL CTI level class 2
l Plastic sealed type
l Various contact material options
l RoHS compliant. Please see page 6 for more information
n PARTNUMBER INFORMATION
JS
-
12
M
E
-
K
T
- V3 *
(g)
[Example]
(a)
(b) (c) (d)
(e) (f)
(a)
(b)
Relay type
Coil rated voltage
JS
: JS-Series
12
: 5.....60 VDC
Coil rating table at page 3
(c)
Contact configuration
Contact material
Nil
M
: 1 form C (SPDT)
: 1 form A (SPST-NO)
(d)
Nil
D
E
F
N
: Gold plate silver cadmium oxide
: Silver nickel
: Silver cadmium oxide
: Gold plate silver nickel
: Gold plate silver tin oxide
(e)
(f)
Enclosure
K
: Plastic sealed type
Construction
Nil
T
: 3.2mm
: 5.0mm (only JS-MN)
(g)
Gold plating
Nil
V3
: 0.3µ gold overlay (available with Nil, N and F contact)
: 3.0µ gold overlay for lower current applications (available with
Nil and N contact, not available for T, 5.0mm type)
Note: Actual marking omits the hyphen (-) or (*)
*: V3 is marked at different position on the relay
E.g.: Ordering code: JS-12E-K
Actual marking: JS12E-K
1
JS SERIES
n SPECIFICATION
Item
Non V3 type
JS - ( ) - K
V3 type
JS - ( ) - K
JS - ( ) D/E/F/N - K
JS - ( ) N - K
Contact Data Configuration
1 form A (SPST-NO), 1 form C (SPDT)
Single
Construction
Material (see part number information)
0.3µ Au plated
3µ Au plated
Resistance (initial)
Contact rating
Max. 100 mΩ at 6VDC, 1A Max. 30 mΩ at 6VDC, 1A
8A, 250VAC / 24VDC
10A
Max. carrying current
Max. switching voltage
Max. switching power
Min. switching load *
Mechanical
400VAC / 300VDC
2,000VA / 192W
100mA, 5VDC
10mA, 5VDC
Life
Min. 20 x 106 operations
Min. 100 x 103 operations (AgCd)
Min. 50 x 103 operations (AgSnO2)
Min. 20 x 103 operations (AgNi)
Min. 100 x 103 operations (AgCd)
Min. 50 x 103 operations (AgSnO2)
Min. 20 x 103 operations (AgNi)
AC contact rating
(resistive load)
Electrical
DC contact rating
(resistive load)
Coil Data
Rated power (at 20 °C)
Operate power (at 20 °C)
220 - 290mW
110 - 140mW
Operating temperature range
-40 °C to +85 °C (no frost)
Timing Data Operate (at nominal voltage)
Release (at nominal voltage)
Max. 10ms (no bounce)
Max. 5ms (no diode, no bounce)
Insulation
Resistance (initial)
Min. 1,000MΩ at 500VDC
Dielectric strength
Open contacts
Contacts to coil
Coil to contacts
1,000VAC (50/60Hz) 1min
5,000VAC (50/60Hz) 1min
Surge strength
Clearance
10,000V / 1.2 x 50µs standard wave
8 mm
Creepage
8 mm
EN61810-1, VDE0435
Voltage
250V
Pollution degree
Material group
Category
3
III a
C / 250V (reference voltage) (VDE 01106)
Other
Misoperation>1us 10 - 55 - 10 Hz double amplitude 1.65mm
Vibration resistance
Endurance
10 - 55 - 10 Hz double amplitude 3.3mm
Min. 100m/s² (11 ± 1ms) 3 directions; 36 shocks (18
with coil energizing, 18 no coil energizing)
Misoperation>1us
Shock
Min. 1,000m/s² (6 ± 1ms) 3 directions, no coil
energizing 18 shocks
Endurance
Weight
Approximately 8.0 g
* Minimum switching loads mentioned above are reference values. Please perform the confirmation test with actual
load before production since reference values may vary according to switching frequencies, environmental conditions
and expected reliability levels.
2
JS SERIES
n COIL RATING
Rated Coil
Voltage
(VDC)
Must Operate
Voltage
Must Release
Voltage
Coil
Code
Coil Resistance
+/- 10% (Ohm)
Max. Coil Voltage
(VDC)
Rated Power
(mW)
(VDC) *
(VDC) *
5
5
112
160
3.5
4.2
0.5
0.6
0.9
1.2
1.8
2.4
4.8
6.0
11.8
14.1
21.2
28.3
42.4
56.6
105.6
132.0
225
6
6
9
9
360
6.3
12
18
24
48
60
12
18
24
48
60
660
8.5
220
225
245
1,455
2,350
8,000
12,500
12.7
16.8
33.4
41.7
290
Note: All values in the table are valid for 20°C and zero contact current.
* Specified operate values are valid for pulse wave voltage.
n SAFETY STANDARDS
Type
Compliance
Contact rating
UL
UL 508
Flammability: UL 94-V0 (plastics)
Contact material: Nil, E
N
D, F
8A, 24VDC
E 56140
8A 24VDC (resistive) 100k
8A, 250VAC (resistive) 100k 8A, 250VAC (resistive) 100k 8A, 250VAC
10A, 30VDC (resistive)
10A, 250VAC (resistive)
1/4HP, 125VAC / 250VAC
1/3HP, 125VAC
1/2HP, 250VAC
Pilot duty: C150, B300
Pilot duty: 0.27A, 250VDC
8A 24VDC (resistive) 100k
CSA
C22.2 No. 14
LR 35579
10A, 30VDC (resistive)
10A, 250VAC (resistive)
1/4HP, 125VAC / 250VAC
1/3HP, 125VAC
1/2HP, 250VAC
Pilot duty: A300, B300
C150, R300
VDE
0435, 0631, 0700,
40013847
8A 250VAC (cos φ=1)
8A 24VDC (0 ms)
JS-( )D-K, JS-( )F-K:
6A, 250VAC, (cos φ=1)
JS-( )MD-K, JS-( )MF-K:
8A, 250VAC
SEMKO
EN 61058-1 + A1: 1993
EN 61095:1993 + A11
Rated voltage (V): 250
Rated current (A): 8 (2) or 8
-
-
Also complies with SEV, ÖVE, FIMKO, BSI, CQC, NEMKO, DEMKO
3
JS SERIES
n CHARACTERISTIC DATA
4
JS SERIES
n DIMENSIONS
Unit: mm
JS-MK
l
Schematics
l
PC board mounting
hole layout
l
Dimensions
(BOTTOM VIEW)
JS-K
l
Schematics
l
PC board mounting
hole layout
l
Dimensions
(BOTTOM VIEW)
JS-MN-KT
l
Schematics
l
PC board mounting
hole layout
l
Dimensions
(BOTTOM VIEW)
5
JS SERIES
RoHS Compliance and Lead Free Information
1. General Information
l
l
l
l
All relays produced by Fujitsu Components are compliant with RoHS directive 2011/65/EU including
amendments.
Cadmium as used in electrical contacts is exempted from the RoHS directives.
As per Annex III of directive 2011/65/EU.
All relays are lead-free. Please refer to Lead-Free Status Info for older date codes at:
http://www.fujitsu.com/downloads/MICRO/fcai/relays/lead-free-letter.pdf
Lead free solder plating on relay terminals is Sn-3.0Ag-0.5Cu, unless otherwise specified.
This material has been verified to be compatible with PbSn assembly process.
2. Recommended Lead Free Solder Condition
l
Recommended solder Sn-3.0Ag-0.5Cu.
Flow Solder condition:
Pre-heating:
Soldering:
maximum 120˚C
dip within 5 sec. at
260˚C solder bath
Solder by Soldering Iron:
Soldering Iron
Temperature:
Duration:
maximum 360˚C
maximum 3 sec.
We highly recommend that you confirm your actual solder conditions
3. Moisture Sensitivity
l
Moisture Sensitivity Level standard is not applicable to electromechanical relays, unless otherwise indicated.
4. Tin Whiskers
l
Dipped SnAgCu solder is known as presenting a low risk to tin whisker development. No considerable length
whisker was found by our in house test.
6
JS SERIES
Fujitsu Components International Headquarter Offices
Japan
Europe
Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141, Japan
Fujitsu Components Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Tel: (81-3) 5449-7010
Tel: (31-23) 5560910
Fax: (81-3) 5449-2626
Email: promothq@ft.ed.fujitsu.com
Web: www.fcl.fujitsu.com
Fax: (31-23) 5560950
Email: info@fceu.fujitsu.com
Web: emea.fujitsu.com/components/
North and South America
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Asia Pacific
Fujitsu Components Asia Ltd.
102E Pasir Panjang Road
Sunnyvale, CA 94089 U.S.A.
Tel: (1-408) 745-4900
#01-01 Citilink Warehouse Complex
Singapore 118529
Fax: (1-408) 745-4970
Tel: (65) 6375-8560
Email: components@us.fujitsu.com
Web: http://us.fujitsu.com/components
Fax: (65) 6273-3021
Email: fcal@fcal.fujitsu.com
Web: http://www.fujitsu.com/sg/services/micro/components/
©2013 Fujitsu Components Europe B.V. All rights reserved. All trademarks or registered trademarks are the property of their respective owners.
The contents, data and information in this datasheet are provided by Fujitsu Component Ltd. as a service only to its user and only for general
information purposes.
The use of the contents, data and information provided in this datasheet is at the users’ own risk.
Fujitsu has assembled this datasheet with care and will endeavor to keep the contents, data and information correct, accurate, comprehensive,
complete and up to date.
Fujitsu Components Europe B.V. and affiliated companies do however not accept any responsibility or liability on their behalf, nor on behalf of its
employees, for any loss or damage, direct, indirect or consequential, with respect to this datasheet, its contents, data, and information and related
graphics and the correctness, reliability, accuracy, comprehensiveness, usefulness, availability and completeness thereof.
Nor do Fujitsu Components Europe B.V. and affiliated companies accept on their behalf, nor on behalf of its employees, any responsibility or liability
for any representation or warrant of any kind, express or implied, including warranties of any kind for merchantability or fitness for particular use,
with respect to these datasheets, its contents, data, information and related graphics and the correctness, reliability, accuracy, comprehensiveness,
usefulness, availability and completeness thereof. Rev. July 03, 2013
7
相关型号:
JS60MNK
POWER/SIGNAL RELAY, SPST, MOMENTARY, 0.005A (COIL), 60VDC (COIL), 290mW (COIL), 8A (CONTACT), 24VDC (CONTACT), THROUGH HOLE-STRAIGHT MOUNT, ROHS COMPLIANT
FUJITSU
JS60MNKT
POWER/SIGNAL RELAY, SPST, MOMENTARY, 0.005A (COIL), 60VDC (COIL), 290mW (COIL), 8A (CONTACT), 24VDC (CONTACT), THROUGH HOLE-STRAIGHT MOUNT, ROHS COMPLIANT
FUJITSU
JS60MNKTV3
Power/Signal Relay, 1 Form A, SPST, Momentary, 0.005A (Coil), 60VDC (Coil), 290mW (Coil), 8A (Contact), 24VDC (Contact), DC Input, AC/DC Output, Through Hole-Straight Mount, ROHS COMPLIANT
FUJITSU
JS60NK
POWER/SIGNAL RELAY, SPDT, MOMENTARY, 0.005A (COIL), 60VDC (COIL), 290mW (COIL), 8A (CONTACT), 24VDC (CONTACT), THROUGH HOLE-STRAIGHT MOUNT, ROHS COMPLIANT
FUJITSU
JS63R-10MHZ
HCMOS Output Clock Oscillator, 10MHz Nom, HERMETIC SEALED, METAL, WELDED, DIP-8/4
CONNOR-WINFIE
JS63R-16.384MHZ
HCMOS Output Clock Oscillator, 16.384MHz Nom, HERMETIC SEALED, METAL, WELDED, DIP-8/4
CONNOR-WINFIE
JS63R-16MHZ
HCMOS Output Clock Oscillator, 16MHz Nom, HERMETIC SEALED, METAL, WELDED, DIP-8/4
CONNOR-WINFIE
©2020 ICPDF网 联系我们和版权申明