JS-9D-K-V3 [FUJITSU]
Power/Signal Relay, SPDT, Momentary, 0.025A (Coil), 9VDC (Coil), 225mW (Coil), 10A (Contact), 150VDC (Contact), DC Input, AC/DC Output, Through Hole-Straight Mount, ROHS COMPLIANT;
| 型号： | JS-9D-K-V3 |
| 厂家： | 
FUJITSU |
| 描述： | Power/Signal Relay, SPDT, Momentary, 0.025A (Coil), 9VDC (Coil), 225mW (Coil), 10A (Contact), 150VDC (Contact), DC Input, AC/DC Output, Through Hole-Straight Mount, ROHS COMPLIANT 光电二极管 继电器 |
| 文件： | 总8页 (文件大小：837K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
POWER RELAY
1 POLE - 8A Medium Load Control
JS Series
n FEATURES
l UL class B (130°C) coil wire insulation
l 1 form A (SPST-NO) or 1 form C (SPDT) contact
l Low profile and space saving
- Height: 12.5 mm - Mounting space: 290 mm2
l High sensitivity in small package
- Operating power 110 to 140 mW
- Nominal power 220 to 290 mW
l High insulation in small package
- Insulation distance : 8.0 mm (between coil and contacts)
- Dielectric strength : 5,000 VAC - Surge strength : 10,000 V
l Plastic materials
- UL 94 flame class V-0 - UL CTI level class 2
l Plastic sealed type
l Various contact material options
l RoHS compliant. Please see page 7 for more information
n PARTNUMBER INFORMATION
JS
-
12
M
E
-
K
T
- V3 *
(g)
[Example]
(a)
(b) (c) (d)
(e) (f)
(a)
(b)
Relay type
Coil rated voltage
JS
12
: JS Series
: 5.....60 VDC
Coil rating table at page 3
(c)
(d)
Contact configuration
Contact material
Nil
M
: 1 form C (SPDT)
: 1 form A (SPST-NO)
Nil
D
E
F
N
: Gold plate silver cadmium oxide
: Silver nickel
: Silver cadmium oxide
: Gold plate silver nickel
: Gold plate silver tin oxide
(e)
(f)
Enclosure
K
: Plastic sealed type
Construction
Nil
T
: 3.2mm
: 5.0mm (only JS-MN, MD, MF)
(g)
Gold plating
Nil
V3
: 0.3μ gold overlay (available with Nil, N and F contact)
: 3.0μ gold overlay for lower current applications (available with Nil
and N) (not available for T , 5.0mm type)
Note: Actual marking omits the hyphen (-) or (*)
*: V3 is marked at different position on the relay
1
E.g.: Ordering code: JS-12E-K
Actual marking: JS12E-K
JS SERIES
n SPECIFICATION
Item
Non V3 type
JS - ( ) - K
V3 type
JS - ( ) - K
JS - ( ) D/E/F/N - K
JS - ( ) N - K
Contact
Data
Configuration
1 form A (SPST-NO), 1 form C (SPDT)
Single
Construction
Material (see part number information)
Resistance (initial)
Contact rating
0.3μ Ag plated
3μ Ag plated
≤ 100 mΩ at 6VDC, 1A
8A, 250VAC / 24VDC
10A
≤ 30 mΩ at 6VDC, 1A
Max. carrying current
Max. switching voltage
Max. switching power
Min. switching load *
Mechanical
400VAC / 150VDC
2,000VA / 192W
100mA, 5VDC
10mA, 5VDC
Life
20 x 106 operations minimum
100 x 103 operations minimum
AC contact rating
Electrical
(JS-( ) N-K 50 x 103 operations minimum)
100 x 103 operations minimum
DC contact rating
(JS-( ) N-K 50 x 103 operations minimum)
Coil Data
Rated power (at 20 °C)
220 - 290mW
Operate power (at 20 °C)
Operating temperature range
110 - 140mW
-40 °C to +85 °C (no frost)
Timing Data Operate (at nominal voltage)
Release (at nominal voltage)
≤ 10ms (no bounce)
≤ 5ms (no diode, no bounce)
Insulation
Resistance (initial)
Dielectric strength
≥ 1,000MΩ at 500VDC
Open contacts
Contacts to coil
Coil to contacts
1,000VAC (50/60Hz) 1min
5,000VAC (50/60Hz) 1min
Surge strength
Clearance
10,000V / 1.2 x 50µs standard wave
8 mm
Creepage
8 mm
EN61810-1, VDE0435
Voltage
250V
Pollution degree
Material group
Category
3
III a
C / 250V (reference voltage) (VDE 01106)
Other
Misoperation>1us 10 to 55Hz double amplitude 1.65mm
Endurance 10 to 55Hz double amplitude 3.3mm
Misoperation>1us Min. 100m/s² (11 ± 1ms)
Vibration resistance
Shock
Endurance
Min. 1,000m/s² (6 ± 1ms)
Approximately 8.0 g
Weight
* Minimum switching loads mentioned above are reference values. Please perform the confirmation test with actual
load before production since reference values may vary according to switching frequencies, environmental contions
and expected reliability levels.
2
JS SERIES
n COIL RATING
Rated Coil
Coil
Must Operate Must Release-
Coil Resistance
+/- 10% (Ohm)
Max. Coil Voltage Rated Power
Voltage
Voltage
(VDC) *
Voltage
(VDC) *
Code
(VDC)
(mW)
(VDC)
5
5
112
160
3.5
4.2
0.5
0.6
0.9
1.2
1.8
2.4
4.8
6.0
11.8
14.1
21.2
28.3
42.4
56.6
105.6
132.0
225
6
6
9
9
360
6.3
12
18
24
48
60
12
18
24
48
60
660
8.5
220
225
245
1,455
2,350
8,000
12,500
12.7
16.8
33.4
41.7
290
Note: All values in the table are valid for 20°C and zero contact current.
* Specified operate values are valid for pulse wave voltage.
n SAFETY STANDARDS
Type
UL
Compliance
UL 508
Contact rating
Flammability: UL 94-V0 (plastics)
Contact material: Nil, E
N
E 56140
8A 24VDC (resistive) 100k
8A, 250VAC (resistive) 100k
10A, 30VDC (resistive)
10A, 250VAC (resistive)
1/4HP, 125VAC / 250VAC
1/3HP, 125VAC
8A 24VDC (resistive) 100k
8A, 250VAC (resistive) 100k
10A, 30VDC (resistive)
10A, 250VAC (resistive)
1/4HP, 125VAC / 250VAC
CSA
C22.2 No. 14
LR 35579
1/3HP, 125VAC
1/2HP, 250VAC
Pilot duty: A300, B300
1/2HP, 250VAC
Pilot duty: C150, B300
Pilot duty: 0.27A, 250VDC
VDE
0435, 0631, 0700,
40013847
8A 250VAC (cos Ø=1)
8A 24VDC (0 ms)
SEMKO EN 61058-1 + A1: 1993
EN 61095:1993 + A11
Rated Voltage (V): 250
Rated Current (A): 8 (2) or 8
Also complies with SEV, ÖVE, FIMKO, BSI, CQC, NEMKO, DEMKO
3
JS SERIES
n CHARACTERISTIC DATA
4
JS SERIES
n REFERENCE DATA
5
JS SERIES
nDIMENSIONS
l
Dimensions
l
PC board mounting
hole layout
l
Schematics
(BOTTOM VIEW)
(BOTTOM VIEW)
JS-MK type
JS-K type
JS-MN( )-KT type
6
JS SERIES
RoHS Compliance and Lead Free Information
1. General Information
l
l
l
l
All signal and power relays produced by Fujitsu Components are compliant with RoHS directive 2002/95EC
including amendments.
Cadmium as used in electrical contacts is exempted from the RoHS directives on October 21st, 2005.
(Amendment to Directive 2002/95/EC)
All of our signal and power relays are lead-free. Please refer to Lead-Free Status Info for older date codes
at: http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf
Lead free solder plating on relay terminals is Sn-3.0Ag-0.5Cu, unless otherwise specified.
This material has been verified to be compatible with PbSn assembly process.
2. Recommended Lead Free Solder Profile
l
Recommended solder Sn-3.0Ag-0.5Cu.
Flow Solder condition:
Pre-heating:
Soldering:
maximum 120˚C
dip within 5 sec. at
260˚C solder bath
Solder by Soldering Iron:
Soldering Iron
Temperature: maximum 360˚C
Duration:
maximum 3 sec.
We highly recommend that you confirm your actual solder conditions
3. Moisture Sensitivity
l
Moisture Sensitivity Level standard is not applicable to electromechanical relays, unless otherwise indicated.
4. Tin Whiskers
l
Dipped SnAgCu solder is known as presenting a low risk to tin whisker development. No considerable length
whisker was found by our in house test.
7
JS SERIES
Fujitsu Components International Headquarter Offices
Japan
Europe
Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141, Japan
Fujitsu Components Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Tel: (81-3) 5449-7010
Tel: (31-23) 5560910
Fax: (81-3) 5449-2626
Email: promothq@ft.ed.fujitsu.com
Web: www.fcl.fujitsu.com
Fax: (31-23) 5560950
Email: info@fceu.fujitsu.com
Web: emea.fujitsu.com/components/
North and South America
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: (1-408) 745-4900
Asia Pacific
Fujitsu Components Asia Ltd.
102E Pasir Panjang Road
#01-01 Citilink Warehouse Complex
Singapore 118529
Fax: (1-408) 745-4970
Tel: (65) 6375-8560
Email: components@us.fujitsu.com
Web: http://us.fujitsu.com/components
Fax: (65) 6273-3021
Email: fcal@fcal.fujitsu.com
Web: http://www.fujitsu.com/sg/services/micro/components/
©2010 Fujitsu Components Europe B.V. All rights reserved. All trademarks or registered trademarks are the property of their respective
owners.
The contents, data and information in this datasheet are provided by Fujitsu Component Ltd. as a service only to its user and only for gen-
eral information purposes.
The use of the contents, data and information provided in this datasheet is at the users’ own risk.
Fujitsu has assembled this datasheet with care and will endeavor to keep the contents, data and information correct, accurate, comprehen-
sive, complete and up to date.
Fujitsu Components Europe B.V. and affiliated companies do however not accept any responsibility or liability on their behalf, nor on behalf
of its employees, for any loss or damage, direct, indirect or consequential, with respect to this datasheet, its contents, data, and information
and related graphics and the correctness, reliability, accuracy, comprehensiveness, usefulness, availability and completeness thereof.
Nor do Fujitsu Components Europe B.V. and affiliated companies accept on their behalf, nor on behalf of its employees, any responsibility
or liability for any representation or warrant of any kind, express or implied, including warranties of any kind for merchantability or fitness for
particular use, with respect to these datasheets, its contents, data, information and related graphics and the correctness, reliability, accuracy,
comprehensiveness, usefulness, availability and completeness thereof. Rev. November 30, 2010
8
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明