FID-550 [FUJITSU]

Resistive Touch Panel Specification; 电阻式触摸屏规格


型号：	FID-550
厂家：	FUJITSU
描述：	Resistive Touch Panel Specification 电阻式触摸屏规格
文件：	总7页 (文件大小：322K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

STANDARD

Resistive Touch Panel Specification

FID-550 7-Wire Series

Panel Drive

change over

switch

MCU

Input Panel

Interface

Control

Section

A/D

converter

Noise Filter

■ FEATURES

• Superior long life, using a unique construction method offering improved life over typical

technologies; by sensing data input only on the glass layer, typically a 10x improvement in

product life is achived.

• Excellent specification and high quality

- Anti-Newton ring technology

- High reliability materials

• Pen/Finger, Pen Only, Finger Only,

Light Touch types available

• Transparency 80% - typical

■ PART NUMBERS

Controller Boards:

■ PART NUMBERS

Touch Panels:

Part Number

Type

Part Number

Size

Type

N010-0510-T302 17"

N010-0510-T211 15"

N010-0550-T913 13.3"

N010-0550-T711 12.1"

Pen/Finger

N16B-0558-B240

N16B-0558-B720

7-Wire, RS232

7-Wire, USB

■ PART NUMBERS

Interface Controller Chips:

N010-0551-T242 12.1" Pen/Finger (light touch type)

Part Number

Type

N010-0550-T811 11.3

N010-0550-T601 10.4"

N010-0550-T611 10.4"

Pen/Finger

Pen only

N010-0559-V022

NC41120-0015

7-Wire, RS232

7-Wire, USB

Pen/Finger

N010-0550-T621 10.4" Pen/Finger (light touch type)

N010-0550-T511 9.5"

N010-0550-T341 8.4"

Pen/Finger

FID-550 SERIES

■ DIMENSION EXAMPLE (10.4” SHOWN)

2.0

243.80

236.80

(3.50)

±1.0

(11.50)

217.10 (transparent area)

215.10

213.10 (input area)

±1.0

123.75

±1.0

Top

(8.00)

Left

Unit: mm

Bottom

■ DETAILED SPECIFICATION

■ 1.0 APPLICATION

This specification applies to the 10.4" (inch) standard Touch Panel (Pen/Finger type). P/N is N010-0550-T611.

■ 2.0 ADDITIONAL APPLICATIONS

Control IC specifications and Control PCB, complete Touch Panel Specifications are also applicable.

■ 3.0 DISCRIPTION AND BLOCK DIAGRAM

This panel in combination with a control IC chip is used to transfer the co-ordinates of the touched position to

the host system (see block diagram above).

■ 4.0 DRAWING (Please see the diagram above.)

Definitions of the major dimensions indicated on this diagram:

Effective Input Area (A)

Area guaranteed to meet all the

characteristics detailed in this specification

View / Transparent Area (B) The area inside the adhesive zone

or electrode pattern.

Anti-input Area (C)

An insulating area allowed to protect

the touch panel from giving false

readings when an enclosure touches

the panel.

■ 5.0 CHARACTERISTICS

■ 5.1 MECHANICAL

Operating Force

Force

0.05~0.49 N (5 ~ 50gF) Measured with

a Silicon Measurement Rod R 8

(Round type 8mm) Silicon Rubber

Hardness 60˚C

Hardness of Surface Pencil hardness 3H minimum against

specification JIS K-5400

Silicon Rubber Rod

■ 5.2 OPTICAL

Transparency

78% min measured in the effective input area to JIS K 7105 using a

MURAKAMI SHIKISAI KENKYUSHO type IIR 100 meter. Typically 80%.

5% measured in the effective input area using a MURAKAMI

SHIKISAI KENKYUSHO type IIR 100 meter with an Anti Glare treated

surface.

Haze

FID-550 SERIES

■ 5.3 ELECTRICAL

Location Accuracy:

±2.5mm Measured over 9 points (See note 1)

Linearity:

1.5%

Current Consumption:

20mA max at DC 5V when applying 5VDC between pins 3 & 5

Switch Bounce (Chattering): 10ms min when using the silicon rubber measurement rod.

Insulation resistance:

10MΩ minimum at 25KV DC applied between pins 3 & 7 or

between 5 and 7

Dielectric Strength:

25KV DC for 1 minute

Note 1:

Measurement condition of linearity is corrected within the

control IC. In general the location accuracy is specified

as follows:

Actual co-ordinate point - theoretical co-ordinate point

= location accuracy.

Theoretical

Error

In general a 9 point co-ordinate calibration system is used

to adjust the micro controller accuracy. (20 point can be

used in combination with an EEPROM design).

Note 2:

Actual

Distance

Pins 3, 5 and 7 are the glass and film connection points.

■ 5.4 ENVIRONMENTAL

Operating Temperature (*):

Storage Temperature:

Operating Humidity:

Storage Humidity:

-5˚C to 60˚C

-30˚C to 70˚C

20% to 90% RH with a Maximum wet bulb temperature of 38˚C

10% ~ 90% RH with a Maximum wet bulb temperature of 38˚C

Coating with the following chemicals and storing at room temperature for 2

hours gives no problems. 10% NaCl-water solution, ethyl-acetate, ethyl-

alcohol, toluene, methyl-ethyl-ketone.

Chemical Resistance:

■ 5.5 PEN LIFE

Character Writing life:

Touch Input life :

Note 1:

1,000,000 words minimum

10,000,000 times minimum

Effective input area

Words are written in the notes area and the size of the word is

7.5mm x 6.75mm. A word is any Alphabet / Number / Mark.

The pen is as shown below and applies a force of 250g.

A failure is judged to happen when the current consumption or

insulation resistance or dielectric strength are not met as

shown in 5.3. The location accuracy with 9 point calibration

must be ±4.4 mm max.

Notes

9 mm

9.0

1.0

3.0

1.5

3.5

110.0±1.0

FID-550 SERIES

■ 5.6 FINGER LIFE

A finger is simulated by a silicon rubber plunger

R8 (Round type 8mm size) hardness 60˚C at 200g

at frequency 5Hz.

A failure is judged to happen when the current

consumption or insulation resistance or dielectric

strength are not met as shown in 5.3. The location

accuracy with 9 point calibration must be ±4.4 mm max.

Typical operating force is 150g max.

■ 5.7 INFORMATION ON THE PANEL

The panel part number is visible from the film side

The production information is visible from the glass side.

Production year 99 00 etc.

1 2 3 4 5 6 7 8 9 X Y Z or 1 2 3 4 5 6 7 8 9 X Y Z

2 3 4 5 6 7 8 9 X Y Z or 2 3 4 5 6 7 8 9 X Y Z

Z or 1 2 3 4 5 6 7 8 9 Y Z

January Production

February Production

December Production

■ 6 PACKAGING

■ 6.1 PACKING SPECIFICATION

Vibration:

Drop test:

10~55 Hz at 1 Octave per minute 10G 20 cycles with one side 0.75mm

60cm Drop 1 corner, 3 crease lines and 6 faces. 1 each 1 time

After the test no glass: flaw or crack is seen, and no dent or scratch on the film.

Also glass and film must not separate.

■ 6.1 PACKING DETAILS

Each touch panel is placed into a plastic bag and is

held in place by a slit cut into the side of the card-

board. A second insertion piece is placed into the

carton to again add stability. The qty is written on

the side of the box. For example the T611 has 26

pieces per box.

Insert

Touch panel with bag

Slit in cardboard

FID-550 SERIES

■ 7.0 REJECT CRITERIA

Description

Reject Criteria

≥

Area 0.1mm

Area

: to be zero

: to be max. 5 points

: none specified

Film Dent

0.05mm²& area < 0.1mm²

Area < 0.05mm²

Area > 0.1mm²

: to be zero

: to be max. 5 points

: none specified

Dot type Area

≥

0.05mm²& area < 0.1mm²

Foreign

material

Area < 0.05mm²

between

glass and film

≥

Area

Line type Area

0.1mm

: to be zero

0.03mm & width <0.1mm and length < 10mm : to be max. 1 point

Area < 0.05mm

: none specified

≥

Area

0.1mm

: to be zero

Scratch

0.03mm & width <0.1mm with length < 80mm : to be max. 1 point

Area < 0.03mm & width <0.1mm with length < 30mm : none specified

Area 0.5mm²

Area

: to be zero

: to be max. 5 points

: none specified

≥

Dot blur or hard coat

missing

0.03mm²& area < 0.5mm²

Area < 0.05mm²

These must not be seen from Panel film side under a fluorescent lamp (3

wavelength type lamp). Not to be verified form glass side.

Newton Ring

Glass flaw

To be no flaw which is bigger than that shown in the following diagram. The

number of flaws is not specified.

3mm

5mm

2mm

■ 8.0 GENERAL POINTS OF CAUTION

Touch panels are made of glass, so care must be taken in handling them. Do not stress, pile, bend, lift by the

cable or put any stress on the film, for example moving by film face vacuum. In order to clean wring dry a

cloth which has been emersed in a natural detergent. DO NOT use any organic solvent, acid or alkali solu-

tion. Watch the edge of the panel when cleaning, again for safety reasons.

FID-550 SERIES

■ 9.0 CONNECTION AND MOUNTING

The details below indicate the recommended mounting structure for panel and enclosure. The enclosure

support to fix the touch panel must be over 1.0mm I width and must be outside the view (Transparent area).

Also ensure that the enclosure does not cause miss input by touching the view area.

The following diagram shows that the enclosure edge must be between the View area and the guaranteed

active area. Ensure space is allocated for the diodes, and we recommend that the material to fix the panel

and enclosure is elastic. Special design would be required to stop water ingress. The corners of the touch

panel are conductive so do not touch any metal parts after mounting.

Top View (Picture, with conductive

side down)

Location

Detect

Right/ Upper

Each side

Left/ Lower

Each side

Glass

0.7

3.35

Stiffener Board

Left/ Lower

All

Film

Laminate Film

Conductive Face

FPC-type cable

Contact Section View

Bottom View (Drawing, with conductive side up)

(Mating connector type FCI or equivalent SFW15R-1ST: for FPC)

Transparent Area

Anit-input Area

0.8 mm min.

Cut-out / avoidance of

550 surface mount diodes

Input Area

Upper Case

Wiring Area

Shock absorber to protect

the panel (eg rubber)

Input Panel

View Area

0.3 to 0.1 mm

Shock absorber

for protection

LCD

Connector

Circuit Board

FID-550 SERIES

■ 10.0 PANEL THICKNESS

Stiffener Board

Conductive Face

Thickness of glass 1.1mm

Europe

Japan

Fujitsu Components Europe B.V.

Diamantlaan 25

2132 WV Hoofddorp

Netherlands

Fujitsu Component Limited

Gotanda-Chuo Building

3-5, Higashigotanda 2-chome, Shinagawa-ku

Tokyo 141, Japan

Fujitsu Components

International

Headquarter

Offices

Tel: (31-23) 5560910

Fax: (31-23) 5560950

Email: info@fceu.fujitsu.com

Web: www.fceu.fujitsu.com

Tel: (81-3) 5449-7010

Fax: (81-3) 5449-2626

Email: promothq@ft.ed.fujitsu.com

Web: www.fcl.fujitsu.com

Asia Pacific

North and South America

Fujitsu Components America, Inc.

250 E. Caribbean Drive

Sunnyvale, CA 94089 U.S.A.

Tel: (1-408) 745-4900

Fujitsu Components Asia Ltd.

102E Pasir Panjang Road

#04-01 Citilink Warehouse Complex

Singapore 118529

Tel: (65) 375-8560

Fax: (1-408) 745-4970

Fax: (65) 273-3021

Email: fcal@fcal.fujitsu.com

www.fcal.fujitsu.com

Email: marcom@fcai.fujitsu.com

Web: www.fcai.fujitsu.com

trademarks of their respective owners. Rev. 11/02/2004.

FID-550 [FUJITSU]

相关型号：

FID-550_06

FID08G-80

FID1018

FID1208

FID1208M

FID1210M

FID1406

FID1418

FID1610M

FID1618

FID16G-80

FID1808GRB