首页 |元器件品牌

FAR-F1DA-12M624-G205 [FUJITSU]

TIMING EXTRACTION BANDPASS FILTER (1.5 to 100MHz); 时序萃取带通滤波器（1.5至100MHz ）
FAR-F1DA-12M624-G205
型号： FAR-F1DA-12M624-G205
厂家： FUJITSU    FUJITSU
描述：

TIMING EXTRACTION BANDPASS FILTER (1.5 to 100MHz)
时序萃取带通滤波器（1.5至100MHz ）

LTE
文件： 总8页 (文件大小：40K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
FUJITSU SEMICONDUCTOR  
DATA SHEET  
DS04-20100-3E  
ASSP  
TIMING EXTRACTION BANDPASS FILTER  
(1.5 to 100MHz)  
F1/F2/F3 SERIES  
■ DESCRIPTION  
The F1, F2 and F3 Series were developed as timing extraction filters for primary, secondary, and tertiary digital  
communication devices.  
This new all-solid-state bandpass filter (BPF) uses a piezoelectric with a large electromechanical coefficient  
(lithium tantalate: LiTaO3). The filter has a wide bandwidth, and is very stable.  
■ FEATURES  
• Wide frequency range 1.5 to 100MHz  
• Wide fractional bandwidth (%): 0.1 to 2.5  
• Low insertion loss: 6dB or less  
• Excellent temperature characteristics: 1.5 to 35MHz: ±400ppm or less (0 to 60°C)  
36 to 100MHz: –30ppm/°C (0 to 60°C)  
• Small frequency deviation ∆fO < ±500ppm eliminating the need for adjustment  
• Highly reliable hermetically sealed package  
• Compatible with small 14-pin DIP IC  
■ PACKAGE  
14-PIN DIP SIZE METAL CASE  
F1/F2/F3 SERIES  
■ PIN ASSIGNMENT  
(BOTTOM VIEW)  
1
7
8
14  
Pin No.  
Pin name  
Description  
1
7
IN  
Input pin  
GND  
NC  
Ground pin  
No connection  
Output pin  
8
14  
OUT  
■ MAXIMUM RATINGS  
Item  
Symbol  
Rating  
Unit  
°C  
Operating temperature  
Storage temperature  
Insulation resistance  
Frequency range  
Ta  
Tstg  
IR  
–20 to 80  
–40 to 80  
°C  
100 (100V DC)  
1.5 to 100  
MΩ  
MHz  
––  
■ RECOMMENDED OPERATING CONDITIONS  
Item  
Symbol  
Rating  
Unit  
°C  
Operating temperature  
Ta  
0 to 70  
2
F1/F2/F3 SERIES  
■ STANDARD FREQUENCY  
Series  
Standard frequency  
1.544MHz  
Application  
Remarks  
For the U.S. and Japan (primary group)  
For Europe (primary group)  
2.048MHz  
3.088MHz  
For the U.S. and Japan (primary group)  
For the U.S. and Japan (primary group)  
For Europe (primary group)  
1.544 × 2  
2.048 × 2  
3.152MHz  
4.096MHz  
F1  
6.312MHz  
For the U.S. and Japan (secondary group)  
For the U.S. and Japan (secondary group)  
For Europe (secondary group)  
8.192MHz  
8.448MHz  
12.624MHz  
16.384MHz  
16.896MHz  
32.064MHz  
34.368MHz  
44.736MHz  
For the U.S. and Japan (secondary group)  
For the U.S. and Japan (secondary group)  
For Europe (secondary group)  
6.312 × 2  
8.192 × 2  
8.448 × 2  
F2  
F3  
For Japan (tertiary group)  
For Europe (tertiary group)  
For the U.S. (tertiary group)  
3
F1/F2/F3 SERIES  
■ ELECTRICAL CHARACTERISTICS  
F1 Series  
Rating  
Item  
Symbol Condition  
Unit  
Remarks  
Min.  
–500  
1000  
––  
Typical Max.  
Frequency deviation  
Load Q  
∆fO  
Q
––  
––  
––  
––  
––  
––  
+500  
40  
ppm  
––  
fO standard  
Insertion loss  
IL  
––  
6
dB  
Stop band attenuation  
AOUT  
fO ± 10MHz  
20  
––  
dB  
Frequency stability with  
temperature  
25°C standard,  
Ta = 0 to 70°C  
∆f (Ta)  
––  
–400  
––  
+400  
ppm  
F2 Series  
Rating  
Item  
Symbol Condition  
Unit  
Remarks  
Min.  
–500  
1000  
––  
Typical Max.  
Frequency deviation  
Load Q  
∆fO  
Q
––  
––  
––  
––  
––  
––  
+500  
40  
ppm  
––  
fO standard  
Insertion loss  
IL  
––  
6
dB  
Stop band attenuation  
AOUT  
fO ± 10MHz  
20  
––  
dB  
Frequency stability with  
temperature  
25°C standard,  
Ta = 0 to 70°C  
∆f (Ta)  
––  
–400  
––  
+400  
ppm  
F3 Series  
Rating  
Item  
Symbol Condition  
Unit  
Remarks  
Min.  
–500  
200  
––  
Typical Max.  
Frequency deviation  
Load Q  
∆fO  
Q
––  
––  
––  
––  
––  
––  
+500  
50  
ppm  
––  
fO standard  
Insertion loss  
IL  
––  
6
dB  
Stop band attenuation  
AOUT  
fO ± 10MHz  
20  
––  
dB  
Frequency stability with  
temperature  
25°C standard,  
Ta = 0 to 70°C  
∆f (Ta)  
––  
–1350  
––  
750  
ppm  
4
F1/F2/F3 SERIES  
■ ELECTRICAL CHARACTERISTICS  
Specification  
Standard  
frequency  
(MHz)  
No.  
Part number  
Phase  
rotation θ  
(degree)  
Terminating  
impedance  
Z (Ω)  
Insertion  
loss, IL (dB)  
Load Q  
1
2
1.544  
1.544  
1.544  
1.544  
2.048  
2.048  
3.088  
3.152  
4.096  
6.312  
6.312  
8.192  
8.448  
12.624  
16.384  
16.896  
32.064  
34.368  
44.736  
FAR-F1DA-1M5440-G201  
FAR-F1DA-1M5440-G202  
FAR-F1DA-1M5440-G203  
FAR-F1DA-1M5440-G205  
FAR-F1DA-2M0480-G201  
FAR-F1DA-2M0480-G202  
FAR-F1DA-3M0880-G201  
FAR-F1DA-3M1520-G201  
FAR-F1DA-4M0960-G201  
FAR-F1DA-6M3120-G201  
FAR-F1DA-6M3120-G202  
FAR-F1DA-8M1920-G201  
FAR-F1DA-8M4480-G201  
FAR-F1DA-12M624-G201  
FAR-F1DA-16M384-G201  
FAR-F1DA-16M896-G201  
FAR-F2DA-32M064-G201  
FAR-F2DA-34M368-G201  
FAR-F3DA-44M736-G201  
110 ±20  
110 ±20  
60 ±10  
3 or less  
3 or less  
3 or less  
3 or less  
3 or less  
3 or less  
3 or less  
3 or less  
3 or less  
3 or less  
3 or less  
3 or less  
3 or less  
3 or less  
3 or less  
3 or less  
3 or less  
3 or less  
6 or less  
–90±20  
–90±20  
–95±10  
–90±20  
–90±10  
–90±20  
–90±20  
–90±15  
–90±20  
–90±20  
–90±20  
–90±20  
–90±20  
–90±20  
–90±20  
–90±20  
–90±15  
–90±15  
38±10  
790  
1000  
2035/20pF  
2000  
2035  
1000  
640  
3
4
110 ±20  
40 ±10  
5
6
100 ±20  
150 ±20  
85 ±15  
7
8
1285  
750  
9
110 ±20  
110 ±20  
110 ±20  
100 ±20  
110 ±20  
100 ±20  
100 ±20  
100 ±20  
100 ±10  
100 ±10  
65 ±15  
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
985  
1000  
980  
980  
590  
410  
390  
100  
100  
105  
■ TEST CIRCUIT  
50Ω  
Z
Z
OSC  
50Ω  
LM  
5
F1/F2/F3 SERIES  
■ CHARACTERISTICS SAMPLE  
Pass band characteristic  
Stop band characteristic  
A : T/R (dB) B :  
θ
0 MKR  
1544000.000Hz  
–724.276mdB  
deg  
A : T/R (dB) B :  
θ
0 MKR  
1544000.000Hz  
–722.721mdB  
–93.1330deg  
A
B
MAX 0.000 dB GAIN  
MAX 180.0 deg PHASE  
A
B
MAX 0.000 dB GAIN  
MAX 180.0 deg PHASE  
A/DIV 5.000  
B MIN –180.0  
dB CENTER  
deg SPAN  
1544000.000Hz  
200000.000Hz  
dB CENTER  
deg SPAN  
1544000.000Hz  
50000.000Hz  
1.000  
–180.0  
A/DIV  
B MIN  
Temperature characteristic  
F3 Series  
F2 Series  
1000  
F1 Series  
–1000  
–20  
0
20  
40  
60  
80  
Temperature (°C)  
■ PART NUMBERING SYSTEM  
[Example]  
FAR–F1DA–  
–G  
➀
➁
➂
➀ Series designation  
➁ Frequency designation: The standard frequency is designated in six alphanumeric characters. M is used  
to designate the decimal point in MHz. Refer to “ELECTRIC CHARACTERISTICS”  
in detail  
Example: 1.544MHz: 1M5440  
➂ Serial number:  
The serial number is assigned from 201 to 999 (201 is normal).  
6
F1/F2/F3 SERIES  
■ MARKING  
Standard frequency  
Fujitu logo  
F
F-1M5440  
G201××××××  
Lot number  
No. 1 pin position  
■ DIMENSIONS  
Unit: mm (in.)  
20.8 max (0.819)  
18.3 (0.720)  
10.7 (0.421)  
ø0.5 (0.020)  
15.2 (0.598)  
7
1
Series  
F1 < 3 MHz  
F1 ≥ 3 MHz  
F2  
H
8.5 (0.335)  
5.8 (0.228)  
5.8 (0.228)  
5.8 (0.228)  
8
14  
F3  
7
FUJITSU LIMITED  
For further information please contact:  
Japan  
FUJITSU LIMITED  
Corporate Global Business Support Division  
Electronic Devices  
KAWASAKI PLANT, 4-1-1, Kamikodanaka  
Nakahara-ku, Kawasaki-shi  
Kanagawa 211-88, Japan  
Tel: (044) 754-3763  
All Rights Reserved.  
The contents of this document are subject to change without  
notice. Customers are advised to consult with FUJITSU sales  
representatives before ordering.  
Fax: (044) 754-3329  
The information and circuit diagrams in this document presented  
as examples of semiconductor device applications, and are not  
intended to be incorporated in devices for actual use. Also,  
FUJITSU is unable to assume responsibility for infringement of  
any patent rights or other rights of third parties arising from the  
use of this information or circuit diagrams.  
North and South America  
FUJITSU MICROELECTRONICS, INC.  
Semiconductor Division  
3545 North First Street  
San Jose, CA 95134-1804, U.S.A.  
Tel: (408) 922-9000  
FUJITSU semiconductor devices are intended for use in  
standard applications (computers, office automation and other  
office equipment, industrial, communications, and measurement  
equipment, personal or household devices, etc.).  
CAUTION:  
Customers considering the use of our products in special  
applications where failure or abnormal operation may directly  
affect human lives or cause physical injury or property damage,  
or where extremely high levels of reliability are demanded (such  
as aerospace systems, atomic energy controls, sea floor  
repeaters, vehicle operating controls, medical devices for life  
support, etc.) are requested to consult with FUJITSU sales  
representatives before such use. The company will not be  
responsible for damages arising from such use without prior  
approval.  
Fax: (408) 432-9044/9045  
Europe  
FUJITSU MIKROELEKTRONIK GmbH  
Am Siebenstein 6-10  
63303 Dreieich-Buchschlag  
Germany  
Tel: (06103) 690-0  
Fax: (06103) 690-122  
Asia Pacific  
FUJITSU MICROELECTRONICS ASIA PTE. LIMITED  
#05-08, 151 Lorong Chuan  
New Tech Park  
Singapore 556741  
Tel: (65) 281-0770  
Fax: (65) 281-0220  
Any semiconductor devices have inherently a certain rate of  
failure. You must protect against injury, damage or loss from  
such failures by incorporating safety design measures into your  
facility and equipment such as redundancy, fire protection, and  
prevention of over-current levels and other abnormal operating  
conditions.  
If any products described in this document represent goods or  
technologies subject to certain restrictions on export under the  
Foreign Exchange and Foreign Trade Control Law of Japan, the  
prior authorization by Japanese government should be required  
for export of those products from Japan.  
F9703  
FUJITSU LIMITED Printed in Japan  

相关型号：

FAR-F1DA-12M624-G999

 TIMING EXTRACTION BANDPASS FILTER (1.5 to 100MHz)
FUJITSU

FAR-F1DA-16M384-G201

 TIMING EXTRACTION BANDPASS FILTER (1.5 to 100MHz)
FUJITSU

FAR-F1DA-16M384-G2012

 Band Pass Filter
FUJITSU

FAR-F1DA-16M384-G202

 TIMING EXTRACTION BANDPASS FILTER (1.5 to 100MHz)
FUJITSU

FAR-F1DA-16M384-G203

 TIMING EXTRACTION BANDPASS FILTER (1.5 to 100MHz)
FUJITSU

FAR-F1DA-16M384-G204

 TIMING EXTRACTION BANDPASS FILTER (1.5 to 100MHz)
FUJITSU

FAR-F1DA-16M384-G205

 TIMING EXTRACTION BANDPASS FILTER (1.5 to 100MHz)
FUJITSU

FAR-F1DA-16M384-G999

 TIMING EXTRACTION BANDPASS FILTER (1.5 to 100MHz)
FUJITSU

FAR-F1DA-1M5440-G201

 TIMING EXTRACTION BANDPASS FILTER (1.5 to 100MHz)
FUJITSU

FAR-F1DA-1M5440-G202

 TIMING EXTRACTION BANDPASS FILTER (1.5 to 100MHz)
FUJITSU

FAR-F1DA-1M5440-G203

 TIMING EXTRACTION BANDPASS FILTER (1.5 to 100MHz)
FUJITSU

FAR-F1DA-1M5440-G2032

 Band Pass Filter
FUJITSU
©2020 ICPDF网 联系我们和版权申明