FS7SHALM25.0 [FOX]
XO, Clock,;型号: | FS7SHALM25.0 |
厂家: | FOX ELECTRONICS |
描述: | XO, Clock, 石英晶振 |
文件: | 总3页 (文件大小:227K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
7x5mm Spread Spectrum SMD Oscillator
S7SH
(former FSS72S Series)
DATASHEET
•
•
•
EMI Reduction
Temperature Ranges to -40ºC to +85ºC
Supply Voltage: 2.5V
ELECTRICAL CHARACTERISTICS
PARAMETERS
MAX (unless otherwise noted)
1 ~ 166MHz
Frequency Range (FO)
Operating Temperature Range
-40 ~ +85ºC
Storage Temperature Range (TSTG
Supply Voltage (VDD
Frequency Stability2
Input Current (IDD
1 ~ <50MHz
)
-55 ~ +125°C
2.5V±5%
±50PPM (Standard)
)
)
20mA
25mA
30mA
80 ~ <100MHz
100 ~ <166MHz
Standby Input Current
10µA
Output Symmetry (50% VDD level)
40% ~ 60%
Rise/Fall Time (10%/90% VDD Levels) (TR/TF)
1 ~ <50MHz
50 ~ <80MHz
80 ~ 166MHz
5nS
4nS
3nS
Output Voltage
(VOL
(VOH
)
10% VDD
90% VDD Min
)
Spread Spectrum Function
Center Spread
Down Spread
±0.125% ~ ±2%
-0.5% ~ 4%
30 ~ 40kHz
15pF
Modulation Frequency
Output Load
Start-up Time
Output Disable Time 1
Output Enable Time 1
(HCMOS)
(TS)
10mS
100nS
10mS
ENABLE / DISABLE FUNCTION
Pin1
Output (pin 3)
OPEN 1
Active
Active
High Z
‘1’ Level VIH 70%VDD
‘0’ Level VIL 30%VDD
• Available Options by Stability & Operating Temp
Frequency
Operating
Temperature (ºC)
Frequency Range (MHz)
2
Stability
±50PPM
±25PPM
±25PPM
-40 ~ +85
0 ~ +70
-40 ~ +85
1 ~ 166.000
1 ~ 166.000
1 ~ 166.000
1 An internal pull-up resistor from pin 1 to pin 4 allows active output if pin 1 is left open.
2 Inclusive of 25°C tolerance, operating temperature range.
Title / Description: S7SH SERIES STANDARD SPECIFICATIONS
Drawing Number: S7SH-DOC-1
Size: A
Part Number:
Cage: 61429
Draftsperson: BEC
Approved: MAJ
Revision Date: 09/10/2019
© Copyright 2019 Fox Electronics. All rights reserved
Page 1 of 3
7x5mm Spread Spectrum SMD Oscillator
S7SH
(former FSS72S Series)
DATASHEET
DIMENSIONS / MECHANICAL SPECIFICATIONS
Maximum Soldering Temp / Time
Moisture Sensitivity Level (MSL)
Termination Finish
260°C / 10 Seconds x 2
1
Au over Ni
Seam
Yes
Seal Method
Lead (Pb) Free
ROHS/REACH Compliant
Yes
Notes:
*A 0.01μF capacitor should be placed between VDD (Pin 4) and GND (Pin2) to minimize power supply line noise.
*Dimensional drawing is for reference to critical specifications defined by size measurements.
Certain non-critical visual attributes, such as side castellations, reference pin shape, etc. may vary.
Title / Description: S7SH SERIES STANDARD SPECIFICATIONS
Drawing Number: S7SH-DOC-1
Part Number:
Size: A
Cage: 61429
Draftsperson: BEC
Approved: MAJ
Revision Date: 09/10/2019
© Copyright 2019 Fox Electronics. All rights reserved
Page 2 of 3
7x5mm Spread Spectrum SMD Oscillator
S7SH
(former FSS72S Series)
DATASHEET
Tape Specifications (millimeters)
Reel Specifications (millimeters)
A
Ø1.5
B
4.0
C
8.0
D
7.5
E
F
Reel Qty
-T1 = 1,000
-T2 = 2,000
G
2.0
H
I
J
K
L
M
2.0
16.0 2.15
Ø13 Ø21 Ø80 Ø255 17.5
Available Options & Part Identification*
Example: F S7S H B M 25.0
F
S7S
H
B
M
25.0
Fox
Model Number
Voltage
H = 2.5V±5%
Center Spread
N = ±0.125%
A = ±0.25%
B = ±0.5%
C = ±0.75%
D = ±1%
Down Spread
P = -0.25%
G = -0.5%
H = -1%
Operating
Frequency
Temperature
C = 0 to +70ºC
M = -40 to +85°C
J = -1.5%
K = -2%
E = ±1.5%
F = ±2%
L = -3%
M = -4%
*Not all frequencies in the frequency range available.
Corporate Headquarters
5570 Enterprise Parkway
Fort Myers, FL 33905
Sales
Tech Support
http://www.FOXONLINE.com/email
1-888-GET-2-FOX (1-888-438-2369)
or
1-239-693-0099
http://www.FOXONLINE.com
http://www.FOXONLINE.com/repdisty
Product use: Fox Electronics reserves the right to modify the products and/or specifications described herein at any time and at Fox Electronics'
sole discretion. All information in this document, including descriptions of product features and performance, is subject to change without notice.
Performance specifications and the operating parameters of the described products are determined in the independent state and are not
guaranteed to perform the same way when installed in customer products. The information contained herein is provided without representation or
warranty of any kind, whether express or implied, including, but not limited to, the suitability of Fox Electronics' products for any particular purpose,
an implied warranty of merchantability, or non-infringement of the intellectual property rights of others. This document is presented only as a guide
and does not convey any license under intellectual property rights of Fox Electronics or any third parties.
Fox Electronics' products are not intended for use in applications involving extreme environmental conditions or in life support systems or
similar devices where the failure or malfunction of a Fox Electronics product can be reasonably expected to significantly affect the health or
safety of users. Anyone using a Fox Electronics product in such a manner does so at their own risk, absent an express, written agreement by
Fox Electronics.
Fox Electronics and the Fox logo are registered trademarks of Fox Electronics. Product specification is subject to change without notice.
Other trademarks and service marks used herein, including protected names, logos and designs, are the property of Fox Electronics or their
respective third-party owners.
Title / Description: S7SH SERIES STANDARD SPECIFICATIONS
Drawing Number: S7SH-DOC-1
Part Number:
Size: A
Cage: 61429
Draftsperson: BEC
Approved: MAJ
Revision Date: 09/10/2019
© Copyright 2019 Fox Electronics. All rights reserved
Page 3 of 3
相关型号:
©2020 ICPDF网 联系我们和版权申明