434-FREQ-BF0 [FOX]
HCMOS Output Clock Oscillator, 1MHz Min, 66.6667MHz Max, PLASTIC, SMD, 4 PIN;
| 型号： | 434-FREQ-BF0 |
| 厂家： | 
FOX ELECTRONICS |
| 描述： | HCMOS Output Clock Oscillator, 1MHz Min, 66.6667MHz Max, PLASTIC, SMD, 4 PIN 机械 振荡器 |
| 文件： | 总1页 (文件大小：89K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
5.0V/3.3V PLASTIC HCMOS SMD CLOCK OSCILLATOR
MODEL: FSO SERIES
FEATURES
• 5.0V / 3.3V Operation
• HCMOS/TTL Output
• Tri-State Enable/Disable
• Extended Temperature Range
• Tape and Reel (1,000 pcs. STD)
Learn more about:
Part Marking Identification
Tape and Reel Specification
• PART NUMBER SELECTIONLearn More - Internet Required
Mechanical Specification
Frequency
Operating
Frequency
Internet required
Model
VDD (V)
Part Number
Stability1 Temperature (ºC) Range (MHz)
Number
259-Frequency-xxxxxFSO-2 3
547-Frequency-xxxxxFSO-2R
432-Frequency-xxxxxFSO-25
433-Frequency-xxxxxFSO-3 3
543-Frequency-xxxxxFSO-3R
434-Frequency-xxxxxFSO-35
5.0 ± 0.5
±100PPM
±100PPM
±50PPM
±100PPM
±100PPM
±50PPM
-20 ~ +70
-40 ~ +85
-20 ~ +70
-20 ~ +70
-40 ~ +85
-20 ~ +70
1.000 ~ 66.6667
1.000 ~ 66.6667
1.000 ~ 66.6667
1.000 ~ 66.6667
1.000 ~ 66.6667
1.000 ~ 66.6667
3.3 ± 0.3
• ELECTRICAL CHARACTERISTICS
FSO-2 Series FSO-3 Series
PARAMETERS
Frequency Range (FO)
MAX (unless otherwise noted)
1.000 ~ 66.6667 MHz
Input Current
1.000 ~ 30.000 MHz
(IDD)
23mA
35mA
9mA
20mA
30.000+ ~ 66.6667 MHz
Output Symmetry (50% VDD)
Rise Time (20% ~ 80% VDD) (TR)
1.000 ~ 30.000 MHz
30.000+ ~ 66.6667 MHz
Fall Time (80% ~ 20% VDD) (TF)
1.000 ~ 30.000 MHz
40% ~ 60%
8nS
7nS
6nS
6nS
8nS
7nS
6nS
6nS
30.000+ ~ 66.6667 MHz
0.4V
0.4V
Output Voltage
Output Current
Output Load
(VOL)
(VOH)
(IOL)
4.6V Min
16mA Min
-16mA Min
10TTL
2.9V Min
4mA Min
-4mA Min
---
(IOH)
(TTL)
(HCMOS)
(TS)
50pF
30pF
Start-up Time
4mS
10mS
100nS
1.000 ~ 30.000 MHz
30.000+ ~ 66.6667 MHz
Enable/Disable Time 2
1 Inclusive of 25ºC tolerance, operating temperature range, input voltage change, aging, and load
change.
2 An internal pullup resistor from pin 1 to pin 4 allows active output if pin 1 is left open.
3 The FSO-2 and FSO-3 models will also operate over -40ºC ~ +85ºC, but with a
stability of ±200 PPM.
Note: A 0.01µF bypass capacitor should be placed between VDD (Pin 4) and GND (Pin 2) to
minimize power supply line noise.
All specifications subject to change without notice. Rev. 6/1/04
All dimensions are in millimeters.
• ENABLE / DISABLE FUNCTION
INH (Pin 1)
OPEN 2
OUTPUT (Pin 3)
ACTIVE
'1' Level VIH ≥ 2.4 V
'0' Level VIL ≤ 0.6 V
ACTIVE
High Z
FOXElectronics 5570 Enterprise Parkway Fort Myers, Florida 33905 USA +1(239)693-0099 FAX +1(239)693-1554 http://www.foxonline.com
63
© 2004 FOX ELECTRONICS
相关型号：
©2020 ICPDF网 联系我们和版权申明