DAPS-0120-090-RS4-F0710 [FESTO]
Quarter turn actuator;
| 型号： | DAPS-0120-090-RS4-F0710 |
| 厂家： | 
Festo |
| 描述： | Quarter turn actuator |
| 文件： | 总2页 (文件大小：100K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Quarter turn actuator
DAPS-0120-090-RS4-F0710
Part number: 533446
Data sheet
Feature
Value
Size of valve actuator
Flange hole pattern
0120
F07
F10
Swivel angle
90 deg
End-position adjusting range at 0°
End-position adjusting range at nominal swivel angle
Depth shaft connection
Type code
-1 deg ... 9 deg
81 deg ... 91 deg
24.8 mm
DAPS
Information on the end-position adjusting range
Standard connection for valve
Cushioning
One end position optionally adjustable
ISO 5211
No cushioning
Any
Mounting position
Mode of operation
Single-acting
Scotch yoke system
None
Design
Position sensing
Closing direction
Clockwise closing
00991266
Symbol
Valve connection conforms to standard
Safety integrity level (SIL)
VDI/VDE 3845 (NAMUR)
Up to SIL 2 high demand mode
Up to SIL 2 low demand mode
Connection pressure for spring force
Connection pressure for spring force
Operating pressure
0.56 MPa
5.6 bar
0.56 MPa ... 0.84 MPa
Operating pressure
5.6 bar ... 8.4 bar
Nominal operating pressure
0.56 MPa
Nominal operating pressure
5.6 bar
CE marking (see declaration of conformity)
Explosion prevention and protection
as per EU explosion protection directive (ATEX)
Zone 1 (ATEX)
Zone 2 (ATEX)
Zone 21 (ATEX)
Zone 22 (ATEX)
ATEX category gas
II 2G
ATEX category for dust
II 2D
Type of ignition protection for gas
Type of (ignition) protection for dust
Explosive ambient temperature
Operating medium
Ex h IIC T6...T3 Gb X
Ex h IIIC T85°C...T200°C Db X
-20°C <= Ta <= +60°C
Compressed air as per ISO 8573-1:2010 [7:4:4]
8/6/21 - Subject to change - Festo AG & Co. KG
1/2
Feature
Value
Information on operating and pilot media
Corrosion resistance class (CRC)
Operation with oil lubrication possible (required for further use)
3 - High corrosion stress
-20 °C ... 80 °C
120 Nm
Ambient temperature
Torque at nominal operating pressure and 0° swivel angle
Torque at nominal operating pressure and 50° swivel angle
Torque at nominal operating pressure and 90° swivel angle
Note about the torque
60 Nm
80 Nm
The actuator's operating torque must not be higher than the maximum
permissible torque listed in ISO 5211, based on the size of the mounting
flange and the coupling.
Spring return torque at 0° swivel angle
Spring return torque with 50° swivel angle
Spring return torque with 90° swivel angle
Spring force
80 Nm
60 Nm
120 Nm
4
Air consumption at 6 bar per cycle 0°-nominal swivel angle-0°
Product weight
5.6 l
6800 g
Shaft connection
T22
Pneumatic connection
G1/8
Note on materials
RoHS-compliant
Wrought aluminum alloy
Cover material
Seals material
FPM
NBR
PUR
Housing material
Material of screws
Shaft material
Wrought aluminum alloy
High-alloy steel
High-alloy steel
1.4305
Material number for shaft
8/6/21 - Subject to change - Festo AG & Co. KG
2/2
相关型号：
©2020 ICPDF网 联系我们和版权申明