ER9.5-3C94-A160-S [FERROXCUBE]
Planar ER cores and accessories; 平面ER内核及配件
| 型号： | ER9.5-3C94-A160-S |
| 厂家： | 
FERROXCUBE INTERNATIONAL HOLDING B.V. |
| 描述： | Planar ER cores and accessories |
| 文件： | 总6页 (文件大小：59K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
FERROXCUBE
DATA SHEET
ER9.5/2.5/5
Planar ER cores and accessories
Supersedes data of September 2004
2008 Sep 01
Ferroxcube
Planar ER cores and accessories
ER9.5/2.5/5
CORE SETS
Effective core parameters
handbook, halfpage
+0.15
1.6
0
2.45
0.05
SYMBOL
PARAMETER
core factor (C1)
VALUE UNIT
Σ(I/A)
Ve
1.67
120
mm−1
mm3
mm
mm2
mm2
g
effective volume
effective length
effective area
0
9.5
−0.3
Ie
14.2
8.47
7.60
≈ 0.35
+0.25
0
+0.2
0
0
−0.2
7.5
7.1
3.5
Ae
Amin
m
minimum area
mass of core half
0
5
−0.2
CBW092
Dimensions in mm.
Fig.1 ER9.5/2.5/5 core half.
Core sets for general purpose transformers and power applications
Clamping force for AL measurements, 10 5 N.
AL
(nH)
AIR GAP
(µm)
GRADE
3C92
µe
TYPE NUMBER
750 25%
850 25%
63 3%
≈ 1000
≈ 1130
≈ 84
≈ 0
≈ 0
ER9.5/2.5/5-3C92-S
3C93
3C94
ER9.5/2.5/5-3C93-S
≈ 200
≈ 120
≈ 70
≈ 0
ER9.5/2.5/5-3C94-A63-S
ER9.5/2.5/5-3C94-A100-S
ER9.5/2.5/5-3C94-A160-S
ER9.5/2.5/5-3C94-S
100 5%
160 8%
1000 25%
1150 25%
900 25%
63 3%
≈ 133
≈ 213
≈ 1330
≈ 1540
≈ 1200
≈ 84
3C95
3C96
3F3
≈ 0
ER9.5/2.5/5-3C95-S
≈ 0
ER9.5/2.5/5-3C96-S
≈ 200
≈ 120
≈ 70
≈ 0
ER9.5/2.5/5-3F3-A63-S
ER9.5/2.5/5-3F3-A100-S
ER9.5/2.5/5-3F3-A160-S
ER9.5/2.5/5-3F3-S
100 5%
160 8%
850 25%
700 25%
40 3%
≈ 133
≈ 213
≈ 1130
≈ 930
≈ 53
3F35
3F4
≈ 0
ER9.5/2.5/5-3F35-S
≈ 340
≈ 190
≈ 100
≈ 0
ER9.5/2.5/5-3F4-A40-S
ER9.5/2.5/5-3F4-A63-S
ER9.5/2.5/5-3F4-A100-S
ER9.5/2.5/5-3F4-S
63 5%
≈ 84
100 5%
525 25%
525 25%
≈ 133
≈ 700
≈ 700
3F45
≈ 0
ER9.5/2.5/5-3F45-S
2008 Sep 01
2
Ferroxcube
Planar ER cores and accessories
ER9.5/2.5/5
Core sets of high permeability grades
Clamping force for AL measurements, 10 5 N.
AL
(nH)
AIR GAP
(µm)
GRADE
µe
TYPE NUMBER
3E5
3E6
3600 +40/−30%
4800 +40/−30%
≈ 4800
≈ 6400
≈ 0
≈ 0
ER9.5/2.5/5-3E5-S
ER9.5/2.5/5-3E6-S
Properties of core sets under power conditions
B (mT) at
CORE LOSS (W) at
f = 100 kHz;
H = 250 A/m;
f = 25 kHz;
T = 100 °C
f = 100 kHz;
B = 100 mT;
T = 100 °C
f = 100 kHz;
B = 200 mT;
T = 25 °C
f = 400 kHz;
B = 50 mT;
f = 500 kHz;
B = 50 mT;
GRADE
ˆ
ˆ
ˆ
ˆ
ˆ
B = 200 mT;
T = 100 °C
T = 100 °C
T = 100 °C
3C92
3C93
3C94
3C95
3C96
3F3
≥370
≥320
≥320
≥320
≥340
≥300
≥300
≥250
≤ 0.011
≤ 0.011(1)
≤ 0.011
−
−
≤ 0.072
≤ 0.072(1)
≤ 0.072
≤ 0.07
≤ 0.058
−
−
−
−
−
−
−
−
−
≤ 0.07
−
−
≤ 0.045
−
≤ 0.0085
≤ 0.015
−
−
−
−
−
≤ 0.018
≤ 0.025
≤ 0.011
−
3F35
3F4
−
≤ 0.016
−
−
−
1. Measured at 140 °C.
Properties of core sets under power conditions (continued)
B (mT) at
CORE LOSS (W) at
H = 250 A/m;
f = 25 kHz;
T = 100 °C
f = 500 kHz;
B = 100 mT;
T = 100 °C
f = 1 MHz;
B = 30 mT;
T = 100 °C
f = 1 MHz;
B = 50 mT;
T = 100 °C
f = 3 MHz;
B = 10 mT;
T = 100 °C
GRADE
ˆ
ˆ
ˆ
ˆ
3F35
3F4
≥300
≥250
≥250
≤ 0.13
−
−
−
−
−
−
≤ 0.036
≤ 0.027
≤ 0.056
≤ 0.048
3F45
≤ 0.1
2008 Sep 01
3
Ferroxcube
Planar ER cores and accessories
ER9.5/2.5/5
COIL FORMERS
General data
PARAMETER
SPECIFICATION
Coil former material
liquid crystal polymer (LCP), glass reinforced, flame retardant
in accordance with “UL 94V-0”; UL file number E54705(M)
Pin material
copper-tin alloy (CuSn), tin (Sn) plated
Maximum operating temperature
Resistance to soldering heat
Solderability
155 °C, “IEC 60085”, class F
“IEC 60068-2-20”, Part 2, Test Tb, method 1B: 350 °C, 3.5 s
“IEC 60068-2-20”, Part 2, Test Ta, method 1: 235 °C, 2 s
∅7.3 0.1
∅4.45
1.6
1.7
0.08
∅3.6
0.08
2.05
min.
2.95
0.1
4.4
max.
9.1
8.1
2
6
0.7
0.25
11.7 max.
8.6 max.
2
CBW093
Dimensions in mm.
Fig.2 ER9.5/2.5/5 coil former (SMD); 8-solder pads.
Winding data and area product for ER9.5/2.5/5 coil former (SMD) with 8 solder pads
MINIMUM
WINDING
WIDTH
AVERAGE
LENGTH OF
TURN
AREA
PRODUCT
Ae x Aw
(mm4)
WINDING
AREA
(mm2)
NUMBER OF
SECTIONS
TYPE NUMBER
(mm)
(mm)
1
2.8
2.05
18.4
23.7
CPVS-ER9.5-1S-8P-Z
2008 Sep 01
4
Ferroxcube
Planar ER cores and accessories
ER9.5/2.5/5
MOUNTING PARTS
General data and ordering information
ITEM
Clamp
REMARKS
FIGURE
TYPE NUMBER
stainless steel (CrNi); clamping force ≈ 20 N
3
CLM-ER9.5
9.8
handbook, halfpage
4
5.5
CBW094
Dimensions in mm.
Fig.3 ER9.5/2.5/5 clamp.
2008 Sep 01
5
Ferroxcube
Planar ER cores and accessories
ER9.5/2.5/5
DATA SHEET STATUS DEFINITIONS
DATA SHEET
STATUS
PRODUCT
STATUS
DEFINITIONS
Preliminary
specification
Development This data sheet contains preliminary data. Ferroxcube reserves the right to
make changes at any time without notice in order to improve design and
supply the best possible product.
Product specification
Production
This data sheet contains final specifications. Ferroxcube reserves the right
to make changes at any time without notice in order to improve design and
supply the best possible product.
DISCLAIMER
Life support applications These products are not designed for use in life support appliances, devices, or systems
where malfunction of these products can reasonably be expected to result in personal injury. Ferroxcube customers
using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Ferroxcube
for any damages resulting from such application.
PRODUCT STATUS DEFINITIONS
STATUS
INDICATION
DEFINITION
These are products that have been made as development samples for the purposes of
technical evaluation only. The data for these types is provisional and is subject to
change.
Prototype
Design-in
Preferred
These products are recommended for new designs.
These products are recommended for use in current designs and are available via our
sales channels.
These products are not recommended for new designs and may not be available
through all of our sales channels. Customers are advised to check for availability.
Support
2008 Sep 01
6
相关型号：
©2020 ICPDF网 联系我们和版权申明