E8-3C90-A250 [FERROXCUBE]
E cores and accessories; E形磁芯及配件
| 型号： | E8-3C90-A250 |
| 厂家： | 
FERROXCUBE INTERNATIONAL HOLDING B.V. |
| 描述： | E cores and accessories |
| 文件： | 总6页 (文件大小：63K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
FERROXCUBE
DATA SHEET
E16/8/5
E cores and accessories
Supersedes data of September 2004
2008 Sep 01
Ferroxcube
E cores and accessories
E16/8/5
CORE SETS
Effective core parameters
+0.7
−0.5
16
handbook, halfpage
SYMBOL
PARAMETER
core factor (C1)
VALUE UNIT
+0.6
11.3
4.7
0
Σ(I/A)
Ve
1.87
750
mm−1
mm3
mm
mm2
mm2
g
0
−0.3
effective volume
effective length
effective area
Ie
37.6
20.1
19.3
≈ 2.0
Ae
+0.4
0
5.7
0
8.2
Amin
m
minimum area
mass of core half
−0.3
R ≤ 1
0
−0.4
4.7
CBW009
Dimensions in mm.
Fig.1 E16/8/5 core half.
Core halves
AL measured in combination with a non-gapped core half, clamping force for AL measurements, 20 10 N.
AL
(nH)
AIR GAP
(µm)
GRADE
3C90
µe
TYPE NUMBER
E16/8/5-3C90-A63
63 5%
100 8%
≈ 95
≈ 150
≈ 240
≈ 370
≈ 470
≈1640
≈ 1250
≈ 1640
≈ 1460
≈ 95
≈ 570
≈ 310
≈ 170
≈ 95
≈ 70
≈ 0
E16/8/5-3C90-A100
E16/8/5-3C90-A160
E16/8/5-3C90-A250
E16/8/5-3C90-A315
E16/8/5-3C90
160 8%
250 15%
315 15%
1100 25%
840 25%
1100 25%
980 25%
63 5%
3C92
3C94
3C96
3F3
≈ 0
E16/8/5-3C92
≈ 0
E16/8/5-3C94
≈ 0
E16/8/5-3C96
≈ 570
≈ 310
≈ 170
≈ 95
≈ 70
≈ 0
E16/8/5-3F3-A63
E16/8/5-3F3-A100
E16/8/5-3F3-A160
E16/8/5-3F3-A250
E16/8/5-3F3-A315
E16/8/5-3F3
100 8%
≈ 150
≈ 240
≈ 370
≈ 470
≈ 1460
≈ 1130
160 8%
250 15%
315 15%
980 25%
760 25%
3F35
≈ 0
E16/8/5-3F35
2008 Sep 01
327
Ferroxcube
E cores and accessories
E16/8/5
Core halves of high permeability grades
Clamping force for AL measurements, 20 10 N.
AL
AIR GAP
(µm)
GRADE
(nH)
µe
≈ 3300
TYPE NUMBER
E16/8/5-3E27
3E27
2200 25%
≈ 0
Properties of core sets under power conditions
B (mT) at
CORE LOSS (W) at
H = 250 A/m;
f = 25 kHz;
T = 100 °C
f = 25 kHz;
f = 100 kHz;
f = 100 kHz;
= 200 mT;
B
T = 100 °C
f = 400 kHz;
GRADE
ˆ
ˆ
ˆ
ˆ
= 200 mT;
= 100 mT;
= 50 mT;
B
B
B
T = 100 °C
T = 100 °C
T = 100 °C
3C90
≥320
≥370
≥320
≥340
≥320
≥300
≤ 0.1
≤ 0.1
≤ 0.075
≤ 0.075
≤ 0.055
≤ 0.1
−
≤ 0.38
≤ 0.38
≤ 0.3
−
−
3C92
3C94
3C96
3F3
−
−
−
−
−
−
−
−
≤ 0.15
−
3F35
−
−
Properties of core sets under power conditions (continued)
B (mT) at
CORE LOSS (W) at
H = 250 A/m;
f = 25 kHz;
T = 100 °C
f = 500 kHz;
f = 500 kHz;
f = 1 MHz;
f = 3 MHz;
GRADE
ˆ
ˆ
ˆ
ˆ
= 10 mT;
B
= 50 mT;
= 100 mT;
= 30 mT;
B
B
B
T = 100 °C
T = 100 °C
T = 100 °C
T = 100 °C
3C90
3C92
3C94
3C96
3F3
≥320
≥370
≥320
≥340
≥315
≥300
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
≤ 0.28
−
−
−
3F35
≤ 0.1
≤ 0.8
2008 Sep 01
328
Ferroxcube
E cores and accessories
E16/8/5
COIL FORMER
General data for 6-pins E16/8/5 coil former
PARAMETER
SPECIFICATION
Coil former material
polyamide (PA6.6), glass reinforced, flame retardant in accordance with
“UL 94V-0”; UL file number E41871(M)
Pin material
copper-tin alloy (CuSn), tin (Sn) plated
Maximum operating temperature
Resistance to soldering heat
Solderability
130 °C, “IEC 60085”, class B
“IEC 60068-2-20”, Part 2, Test Tb, method 1B, 350 °C, 3.5 s
“IEC 60068-2-20”, Part 2, Test Ta, method 1, 235 °C, 2 s
0
−0.2
11.1
2.5
9.4 min.
+0.2
0
4.9
+0.2
0
11
max.
6.1 0.1
4.9
2.2
13.45
max.
3
0
10.9
∅0.6
7.5 0.1
13.5 max.
−0.2
CBW010
+0.15
0
1
12.5 0.15
16.15 max.
Dimensions in mm.
Fig.2 E16/8/5 coil former; 6-pins.
Winding data and area product for 6-pins E16/8/5 coil former
MINIMUM
WINDING
WIDTH
AVERAGE
LENGTH OF
TURN
AREA
WINDING
AREA
(mm2)
NUMBER OF
SECTIONS
PRODUCT
Ae x Aw
(mm4)
TYPE NUMBER
(mm)
(mm)
1
21.6
9.4
33
434
CPH-E16/8/5-1S-6P-Z
2008 Sep 01
329
Ferroxcube
E cores and accessories
E16/8/5
COIL FORMER
General data for 9-pins E16/8/5 coil former
PARAMETER
SPECIFICATION
Coil former material
phenolformaldehyde (PF), glass reinforced, flame retardant in accordance with
“UL 94V-0”; UL file number E41429 (M)
Pin material
copper-clad steel, tin (Sn) plated
Maximum operating temperature
Resistance to soldering heat
Solderability
180 °C, “IEC 60085”, class H
“IEC 60068-2-20”, Part 2, Test Tb, method 1B, 350 °C, 3.5 s
“IEC 60068-2-20”, Part 2, Test Ta, method 1, 235 °C, 2 s
15
11.1 0.2
5
11.15 0.2
6.4 0.2
4.9 0.15
9.5 0.2
14.9 0.3
4.9 0.15
2.5 0.2
0.64 0.05
4
0.3
17 0.3
23.8 0.4
0.64 0.05
19.8 0.3
7
14
MFW047
Dimensions in mm.
Fig.3 E16/8/5 coil former; 9-pins.
Winding data and area product for 9-pins E16/8/5 coil former; note 1
MINIMUM
WINDING
WIDTH
AVERAGE
LENGTH OF
TURN
AREA
PRODUCT
Ae x Aw
(mm4)
WINDING
AREA
(mm2)
NUMBER OF
SECTIONS
TYPE NUMBER
(mm)
(mm)
1
20.2
9.6
35
406
CSH-E16/8/5-1S-9P
Note
1. This coil former is optimized for the use of triple-isolated wire. This wire is approved for safety isolation without the
usual creepage distance.
2008 Sep 01
330
Ferroxcube
E cores and accessories
E16/8/5
DATA SHEET STATUS DEFINITIONS
DATA SHEET
STATUS
PRODUCT
STATUS
DEFINITIONS
Preliminary
specification
Development This data sheet contains preliminary data. Ferroxcube reserves the right to
make changes at any time without notice in order to improve design and
supply the best possible product.
Product specification
Production
This data sheet contains final specifications. Ferroxcube reserves the right
to make changes at any time without notice in order to improve design and
supply the best possible product.
DISCLAIMER
Life support applications These products are not designed for use in life support appliances, devices, or systems
where malfunction of these products can reasonably be expected to result in personal injury. Ferroxcube customers
using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Ferroxcube
for any damages resulting from such application.
PRODUCT STATUS DEFINITIONS
STATUS
INDICATION
DEFINITION
These are products that have been made as development samples for the purposes of
technical evaluation only. The data for these types is provisional and is subject to
change.
Prototype
Design-in
Preferred
These products are recommended for new designs.
These products are recommended for use in current designs and are available via our
sales channels.
These products are not recommended for new designs and may not be available
through all of our sales channels. Customers are advised to check for availability.
Support
2008 Sep 01
331
相关型号：
©2020 ICPDF网 联系我们和版权申明