CM0504F [FENGJUI]
EMI SOLOTION PRODUCTS-RoHS;型号: | CM0504F |
厂家: | FENGJUI TECHNOLOGY CO., LTD. |
描述: | EMI SOLOTION PRODUCTS-RoHS |
文件: | 总2页 (文件大小:203K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
FENG-JUI TECHNOLOGY CO., LTD EMI SOLOTION PRODUCTS-RoHS
CM0504F TYPE
●FEATURE
1. Capable of handling the highest current(up to 5A) of any chip-type common mode filter
2. Noise is greatly suppressed.
●Applications
1. Used for power line noise suppression for any electroic devices.Used to counter adapter/battery line noise
for relatively large electronic devices such as notebook , stand-alone word processor, etc.
●Shape and Dimension
●Schematics and Land Patterns(mm)
A=4.800.30 m/m ; B=5.000.30 m/m ; C=4.50 m/m Max ; D=3.50 m/m Ref.
E=2.20 m/m Ref. ; F=1.10 m/m Ref.
●Specification
Part number
Common mode Impedance DC Resistance
Rated
Rated
Insulation
Z(Ω) at 100MHz
typical
190
(mΩ)±40%
Current(A) Voltage(V)
Resistance
(MΩ)Min
10
CM0504F-191
CM0504F-251
CM0504F-501
CM0504F-102
CM0504F-152
CM0504F-202
10
14
15
16
20
35
5.0
5.0
5.0
4.5
4.0
3.5
50
50
50
50
50
50
250
10
500
10
1000
10
1500
10
2000
10
Note1. Measurement ambient temperature of Impedance, DCR and IDC : at 25℃
Note2. Packing: reel ; Quantity: 1500pcs/reel
Your Perfect Inductor
Rev.1801
FENG-JUI TECHNOLOGY CO., LTD EMI SOLOTION PRODUCTS-RoHS
GENERAL CHARACTERISTICS
1. Operating temperature range: -40 TO + 105℃(Includes temperature when the coil is heated)
2. External appearance: On visual inspection, the coil has no external defects.
3. Terminal strength: After soldering. Between copper plate and terminals of coil. Push in two directions of X.Y
withstanding at below conditions.
Terminal should not peel off. (refer to figure at right) 5. 0N 60 sec.
4. Insulating resistance: Over 100MΩ at 100V D.C. between coil and core.
5. Dielectric strength: No dielectric breakdown at 100V D.C. for 1 minute between coil and core.
6. Temperature characteristics: Inductance coefficient (0~2,000)x10-6/℃(-25~+80℃ degree Celsius),
inductance deviation within±5.0%, after 96 hours.
7. Humidity characteristics(Moisture Resistance): Inductance deviation within ±5%, after 96 hours in 90~95%
relative humidity at 40 ±2℃and 1 hour drying under normal condition.
8. Vibration resistance: Inductance deviation within ±5%, after vibration for 1 hour. In each of three orientations
at sweep vibration (10~55~10 Hz) with 1.5mm P-P amplitudes.
9. Shock resistance: Inductance deviation within ±5%, after being dropped once with 981m/s2 (100G) shock
attitude upon a rubber block method shock testing machine, in three different orientations.
10. Resistance to Soldering Heat: 260℃, 10 seconds(See attached recommend reflow)
11. Storage condition: Temperature Range: 0℃ ~ 35℃;-40℃ ~ 105℃ (after PCB),Humidity Range: 50% ~
70% RH
12. Use components within 12 months. If 12 months or more have elapsed, check solderability before use.
13. Reflow profile recommend:
Lead-free heat en duran ce test
Lead-free the recommended reflow condition
T( ℃ )
T(℃)
3 0 0
2 5 0
2 0 0
1 5 0
300
26 0 ℃
23 0℃
245℃ Peak
250
230℃
200
40
10
150
6 0
170±10℃,60-120S
1 0 0
5 0
0
100
50
T(s
0
T(s)
0
6 0
1 20
18 0
24 0
3 0 0
0
60
120
180
240
300
Your Perfect Inductor
Rev.1801
相关型号:
©2020 ICPDF网 联系我们和版权申明