NC7SV57P6X [FAIRCHILD]
TinyLogic. ULP-A Universal Configurable 2-Input Logic Gates; TinyLogic 。 ULP -A通用可配置2输入逻辑门
| 型号： | NC7SV57P6X |
| 厂家： | 
FAIRCHILD SEMICONDUCTOR |
| 描述： | TinyLogic. ULP-A Universal Configurable 2-Input Logic Gates |
| 文件： | 总11页 (文件大小：197K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
June 2002
Revised January 2003
NC7SV57 • NC7SV58
TinyLogic ULP-A Universal Configurable
2-Input Logic Gates
General Description
Features
The NC7SV57 and NC7SV58 are universal configurable
2-input logic gates from Fairchild’s Ultra Low Power
(ULP-A) Series of TinyLogic . ULP-A is ideal for applica-
tions that require extreme high speed, high drive and low
power. This product is designed for a wide low voltage
operating range (0.9V to 3.6V VCC) and applications that
■ 0.9V to 3.6V VCC supply operation
■ 3.6V overvoltage tolerant I/O’s at VCC from 0.9V to 3.6V
■ Extremely High Speed tPD
2.5 ns typ for 2.7V to 3.6V VCC
3.1 ns typ for 2.3V to 2.7V VCC
require more drive and speed than the TinyLogic ULP
series, but still offer best in class low power operation.
Each device is capable of being configured for 1 of 5
unique 2-input logic functions. Any possible 2-input combi-
natorial logic function can be implemented as shown in the
Function Selection Table. Device functionality is selected
by how the device is wired at the board level. Figure 1
through Figure 10 illustrate how to connect the NC7SV57
and NC7SV58 respectively for the desired logic function.
All inputs have been implemented with hysteresis.
4.0 ns typ for 1.65V to 1.95V VCC
6.0 ns typ for 1.4V to 1.6V VCC
8.0 ns typ for 1.1V to 1.3V VCC
23.0 ns typ for 0.9V VCC
■ Power-Off high impedance inputs and outputs
■ High Static Drive (IOH/IOL
±24 mA @ 3.00V VCC
±18 mA @ 2.30V VCC
±6 mA @ 1.65V VCC
±4 mA @ 1.4V VCC
)
The NC7SV57 and NC7SV58 are uniquely designed for
optimized power and speed, and are fabricated with an
advanced CMOS technology to achieve high-speed opera-
tion while maintaining low CMOS power dissipation.
±2 mA
@ 1.1V VCC
±0.1 mA @ 0.9V VCC
■ Uses patented Quiet Series noise/EMI reduction
circuitry
■ Ultra small MicroPak leadfree package
■ Ultra low Dynamic Power
Ordering Code:
Package
Number
MAA06A
MAC06A
MAA06A
MAC06A
Product Code
Order Number
Package Description
Supplied As
Top Mark
V57
NC7SV57P6X
NC7SV57L6X
NC7SV58P6X
NC7SV58L6X
6-Lead SC70, EIAJ SC88, 1.25mm Wide
6-Lead MicroPak, 1.0mm Wide
3k Units on Tape and Reel
5k Units on Tape and Reel
3k Units on Tape and Reel
5k Units on Tape and Reel
H3
V58
6-Lead SC70, EIAJ SC88, 1.25mm Wide
6-Lead MicroPak, 1.0mm Wide
H4
Battery Life vs. V Supply Voltage
CC
TinyLogic ULP and ULP-A with up to 50% less power consumption can
extend your battery life significantly.
Battery Life = (Vbattery *Ibattery*.9)/(Pdevice)/24hrs/day
Where, Pdevice = (ICC * VCC) + (CPD + CL) * VCC2 * f
Assumes ideal 3.6V Lithium Ion battery with current rating of 900mAH and
derated 90% and device frequency at 10MHz, with CL = 15 pF load
TinyLogic , MicroPak , and Quiet Series are trademarks of Fairchild Semiconductor Corporation.
© 2003 Fairchild Semiconductor Corporation
DS500671
www.fairchildsemi.com
Pin Descriptions
Connection Diagrams
Pin Name
I0, I1, I2
Y
Description
Data Inputs
Output
Pin Assignments for SC70
Function Table
Inputs
I1
NC7SV57
NC7SV58
I2
I0 Y = (I0)•(I2)+(I1)•(I2) Y = (I0)•(I2)+(I1)•(I2)
L
L
L
L
L
H
L
H
L
L
H
L
L
H
H
L
H
L
(Top View)
L
H
L
H
H
H
L
Pin One Orientation Diagram
H
H
H
H
L
L
H
L
L
H
H
H
H
H
L
H = HIGH Logic Level
L = LOW Logic Level
Function Selection Table
AAA represents Product Code Top Mark - see ordering code
Device
2-Input Logic Function
Selection
Connection
Configuration
Figure 1
Note: Orientation of Top Mark determines Pin One location. Read the top
product code mark left to right, Pin One is the lower left pin (see diagram).
2-Input AND
NC7SV57
NC7SV58
Pad Assignments for MicroPak
2-Input AND
Figures 7, 8
with inverted input
2-Input AND
NC7SV57
Figure 4
with both inputs inverted
2-Input NAND
NC7SV58
NC7SV57
Figure 6
2-Input NAND
Figures 2, 3
with inverted input
2-Input NAND
with both inputs inverted
NC7SV58
Figure 9
(Top Thru View)
2-Input OR
NC7SV58
NC7SV57
Figure 9
2-Input OR
Figures 2, 3
with inverted input
2-Input OR
NC7SV58
Figure 6
with both inputs inverted
2-Input NOR
NC7SV57
NC7SV58
Figure 4
2-Input NOR
Figures 7, 8
with inverted input
2-Input NOR
NC7SV57
Figure 1
with both inputs inverted
2-Input XOR
NC7SV58
NC7SV57
Figure 10
Figure 5
2-Input XNOR
www.fairchildsemi.com
2
Logic Configurations NC7SV57
Figure 1 through Figure 5 show the logical functions that can be implemented using the NC7SV57. The diagrams show the
DeMorgan’s equivalent logic duals for a given 2-input function. Next to the logical implementation is the board level physical
implementation of how the pins of the function should be connected.
FIGURE 1. 2-Input AND Gate
FIGURE 2. 2-Input NAND with Inverted A Input
FIGURE 3. 2-Input NAND with Inverted B Input
FIGURE 4. 2-Input NOR Gate
FIGURE 5. 2-Input XNOR Gate
3
www.fairchildsemi.com
Logic Configurations NC7SV58
Figure 6 through Figure 10 show the logical functions that can be implemented using the NC7SV58. The diagrams show
the DeMorgan’s equivalent logic duals for a given 2-input function. Next to the logical implementation is the board level
physical implementation of how the pins of the function should be connected.
FIGURE 6. 2-Input NAND Gate
FIGURE 7. 2-Input AND with Inverted A Input
FIGURE 8. 2-Input AND with Inverted B Input
FIGURE 9. 2-Input OR Gate
FIGURE 10. 2-Input XOR Gate
www.fairchildsemi.com
4
Absolute Maximum Ratings(Note 1)
Recommended Operating
Conditions (Note 3)
−0.5V to +4.6V
Supply Voltage (VCC
DC Input Voltage (VIN
DC Output Voltage (VOUT
HIGH or LOW State (Note 2)
CC = 0V
DC Input Diode Current (IIK) VIN < 0V
DC Output Diode Current (IOK
)
)
−0.5V to +4.6V Supply Voltage
0.9V to 3.6V
0V to 3.6V
)
Input Voltage (VIN
)
−0.5V to VCC +0.5V
−0.5V to +4.6V
±50 mA
Output Voltage (VOUT
)
V
V
CC = 0.0V
0V to 3.6V
0V to VCC
HIGH or LOW State
)
Output Current in IOH/IOL
V
V
OUT < 0V
−50 mA
+50 mA
± 50 mA
V
V
V
V
V
V
CC = 3.0V to 3.6V
CC = 2.3V to 2.7V
CC = 1.65V to 1.95V
CC = 1.4V to 1.6V
CC = 1.1V to 1.3V
CC = 0.9V
±24 mA
±18 mA
OUT > VCC
DC Output Source/Sink Current (IOH/IOL
DC VCC or Ground Current per
Supply Pin (ICC or Ground)
)
±6 mA
±4 mA
± 50 mA
±2 mA
Storage Temperature Range (TSTG
)
−65°C to +150°C
±0.1 mA
Free Air Operating Temperature (TA)
−40°C to +85°C
Minimum Input Edge Rate (∆t/∆V)
V
IN = 0.8V to 2.0V, VCC = 3.0V
10 ns/V
Note 1: Absolute Maximum Ratings: are those values beyond which the
safety of the device cannot be guaranteed. The device should not be oper-
ated at these limits. The parametric values defined in the Electrical Charac-
teristics tables are not guaranteed at the absolute maximum ratings. The
“Recommended Operating Conditions” table will define the conditions for
actual device operation.
Note 2: IO Absolute Maximum Rating must be observed.
Note 3: Unused inputs must be held HIGH or LOW. They may not float.
DC Electrical Characteristics
VCC
T
A = +25°C
TA = −40°C to +85°C
Symbol
Parameter
Units
Conditions
(V)
Min
Max
Min
0.3
Max
0.7
1.0
1.4
1.5
1.8
2.2
0.6
0.7
0.8
0.9
1.15
1.5
0.5
0.6
0.8
1.0
1.1
1.2
VP
Positive Threshold Voltage
0.90
1.10
1.40
1.65
2.30
2.70
0.90
1.10
1.40
1.65
2.30
2.70
0.90
1.10
1.40
1.65
2.30
2.70
0.3
0.4
0.7
1.0
1.4
1.5
1.8
2.2
0.6
0.7
0.8
0.9
1.15
1.5
0.5
0.6
0.8
1.0
1.1
1.2
0.4
0.5
0.5
V
0.7
0.7
1.0
1.0
1.3
1.3
VN
Negative Threshold Voltage
0.10
0.15
0.2
0.1
0.15
0.2
V
V
0.25
0.4
0.25
0.4
0.6
0.6
VH
Hysteresis Voltage
0.07
0.08
0.1
0.07
0.08
0.1
0.15
0.25
0.40
0.15
0.25
0.40
5
www.fairchildsemi.com
DC Electrical Characteristics (Continued)
VCC
T
A = +25°C
TA = −40°C to +85°C
Symbol
Parameter
HIGH Level
Units
Conditions
(V)
Min
Max
Min
Max
VOH
0.90
V
V
V
V
V
V
CC − 0.1
CC − 0.1
CC − 0.2
CC − 0.2
CC − 0.2
CC − 0.2
VCC − 0.1
VCC − 0.1
VCC − 0.2
VCC − 0.2
VCC − 0.2
VCC − 0.2
Output Voltage
1.10 ≤ VCC ≤ 1.30
1.40 ≤ VCC ≤ 1.60
1.65 ≤ VCC ≤ 1.95
2.30 ≤ VCC < 2.70
2.70 ≤ VCC ≤ 3.60
I
OH = −100 µA
1.10 ≤ VCC ≤ 1.30 0.75 x VCC
1.40 ≤ VCC ≤ 1.60 0.75 x VCC
0.75 x VCC
0.75 x VCC
1.25
I
I
OH = −2 mA
OH = −4 mA
V
1.65 ≤ VCC ≤ 1.95
2.30 ≤ VCC < 2.70
2.30 ≤ VCC < 2.70
2.70 ≤ VCC ≤ 3.60
2.30 ≤ VCC < 2.70
2.70 ≤ VCC ≤ 3.60
2.70 ≤ VCC ≤ 3.60
0.90
1.25
2.0
1.8
2.2
1.7
2.4
2.2
I
I
OH = −6 mA
2.0
1.8
OH = −12 mA
2.2
1.7
I
I
OH = −18 mA
OH = −24 mA
2.4
2.2
VOL
LOW Level
0.1
0.1
0.1
Output Voltage
1.10 ≤ VCC ≤ 1.30
1.40 ≤ VCC ≤ 1.60
1.65 ≤ VCC ≤ 1.95
2.30 ≤ VCC < 2.70
2.70 ≤ VCC ≤ 3.60
1.10 ≤ VCC ≤ 1.30
1.40 ≤ VCC ≤ 1.60
1.65 ≤ VCC ≤ 1.95
2.30 ≤ VCC < 2.70
2.70 ≤ VCC ≤ 3.60
2.30 ≤ VCC < 2.70
2.70 ≤ VCC ≤ 3.60
2.70 ≤ VCC ≤ 3.60
0.90 to 3.60
0.1
0.2
0.2
I
OL = 100 µA
0.2
0.2
0.2
0.2
0.2
0.2
0.25 x VCC
0.25 x VCC
0.3
0.25 x VCC
I
I
I
OL = 2 mA
OL = 4 mA
OL = 6 mA
V
0.25 x VCC
0.3
0.4
0.4
0.6
0.4
0.55
±0.9
5
0.4
I
OL = 12 mA
0.4
0.6
I
I
OL = 18 mA
OL = 24 mA
0.4
0.55
±0.1
1
IIN
Input Leakage Current
µA
µA
0 ≤ VI ≤ 3.6V
IOFF
ICC
Power Off Leakage Current
Quiescent Supply Current
0
0 ≤ (VI, VO) ≤ 3.6V
VI = VCC or GND
0.90 to 3.60
0.9
5
µA
0.90 to 3.60
±5
VCC ≤ VI ≤ 3.6V
AC Electrical Characteristics
VCC
T
A = +25°C
TA = −40°C to +85°C
Figure
Number
Symbol
Parameter
Units
Conditions
(V)
Min
Typ
15
8
Max
Min
Max
tPHL
tPLH
Propagation Delay
0.90
C
L = 15 pF, RL = 1 MΩ
L = 15 pF, RL = 2 kΩ
1.10 ≤ VCC ≤ 1.30
1.40 ≤ VCC ≤ 1.60
1.65 ≤ VCC ≤ 1.95
2.30 ≤ VCC < 2.70
2.70 ≤ VCC ≤ 3.60
0
4.0
2.0
2.0
1.5
1.2
16.5
10.0
9.1
3.3
2.0
1.9
1.4
1.2
31.0
12.0
10.0
6.7
C
6
Figures
11, 12
ns
4
C
L = 30 pF
L = 500Ω
3.1
2.5
8.0
12.0
6.2
R
5.4
6.1
CIN
Input Capacitance
Output Capacitance
Power Dissipation
Capacitance
pF
pF
COUT
CPD
0
VI = 0V or VCC
f = 10 MHz
0.90 to 3.60
10
pF
www.fairchildsemi.com
6
AC Loading and Waveforms
FIGURE 11. AC Test Circuit
FIGURE 12. AC Waveforms
VCC
Symbol
3.3V ± 0.3V
1.5V
2.5V ± 0.2V
1.8V ± 0.15V
VCC/2
1.5V ± 0.10V
1.2V ± 0.10V
VCC/2
0.9V
VCC/2
VCC/2
Vmi
VCC/2
VCC/2
VCC/2
VCC/2
Vmo
1.5V
VCC/2
VCC/2
7
www.fairchildsemi.com
Tape and Reel Specification
TAPE FORMAT for SC70
Package
Tape
Section
Number
Cavities
125 (typ)
3000
Cavity
Status
Empty
Filled
Cover Tape
Status
Designator
Leader (Start End)
Carrier
Sealed
P6X
Sealed
Trailer (Hub End)
75 (typ)
Empty
Sealed
TAPE DIMENSIONS inches (millimeters)
www.fairchildsemi.com
8
Tape and Reel Specification (Continued)
TAPE FORMAT for MicroPak
Package
Tape
Section
Number
Cavities
125 (typ)
5000
Cavity
Status
Empty
Filled
Cover Tape
Status
Designator
Leader (Start End)
Carrier
Sealed
L6X
Sealed
Trailer (Hub End)
75 (typ)
Empty
Sealed
TAPE DIMENSIONS inches (millimeters)
REEL DIMENSIONS inches (millimeters)
Tape
Size
A
B
C
D
N
W1
W2
W3
7.0
0.059
0.512
0.795
2.165 0.331 + 0.059/−0.000
0.567
W1 + 0.078/−0.039
(W1 + 2.00/−1.00)
8 mm
(177.8) (1.50) (13.00) (20.20) (55.00) (8.40 + 1.50/−0.00)
(14.40)
9
www.fairchildsemi.com
Physical Dimensions inches (millimeters) unless otherwise noted
6-Lead SC70, EIAJ SC88, 1.25mm Wide
Package Number MAA06A
www.fairchildsemi.com
10
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
6-Lead MicroPak, 1.0mm Wide
Package Number MAC06A
Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and
Fairchild reserves the right at any time without notice to change said circuitry and specifications.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD
SEMICONDUCTOR CORPORATION. As used herein:
1. Life support devices or systems are devices or systems
which, (a) are intended for surgical implant into the
body, or (b) support or sustain life, and (c) whose failure
to perform when properly used in accordance with
instructions for use provided in the labeling, can be rea-
sonably expected to result in a significant injury to the
user.
2. A critical component in any component of a life support
device or system whose failure to perform can be rea-
sonably expected to cause the failure of the life support
device or system, or to affect its safety or effectiveness.
www.fairchildsemi.com
11
www.fairchildsemi.com
相关型号：
©2020 ICPDF网 联系我们和版权申明