KA317L_12 [FAIRCHILD]

3-Terminal 0.1A Positive Adjustable Regulator; 三端0.1A正,可调式稳压器
KA317L_12
型号: KA317L_12
厂家: FAIRCHILD SEMICONDUCTOR    FAIRCHILD SEMICONDUCTOR
描述:

3-Terminal 0.1A Positive Adjustable Regulator
三端0.1A正,可调式稳压器

稳压器
文件: 总5页 (文件大小:157K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
December 2012  
KA317L  
3-Terminal 0.1A Positive Adjustable Regulator  
Description  
Features  
The KA317L is a 3-terminal, adjustable, positive-volt-  
age regulator capable of supplying in excess of 100 mA  
over an output voltage range of 1.2 V to 37 V. This volt-  
age regulator requires only two external resistors to set  
the output voltage.  
• Output Current in Excess of 100 mA  
• Output Adjustable Between 1.2 V and 37 V  
• Internal Thermal Overload Protection  
• Internal Short Circuit Current Limiting  
• Output Transistor Safe Area Compensation  
• Floating Operation for High-Voltage Applications  
TO-92  
1
1. Adj 2. Output 3. Input  
Ordering Information  
Part Number Operating Temperature Range  
Top Mark  
Package  
Packing Method  
KA317LZTA  
0°C to +125°C  
KA317LZ  
TO-92  
Ammo  
Block Diagram  
Input  
3
+
-
P rote ction  
Circ uitry  
V olta ge  
R e fe re nce  
R LIMIT
2
Output  
1
V
ADJ  
Figure 1. Block Diagram  
© 2002 Fairchild Semiconductor Corporation  
KA317L Rev. 1.1.0  
www.fairchildsemi.com  
1
Absolute Maximum Ratings  
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be opera-  
ble above the recommended operating conditions and stressing the parts to these levels is not recommended. In addi-  
tion, extended exposure to stresses above the recommended operating conditions may affect device reliability. The  
absolute maximum ratings are stress ratings only. Values are at TA = 25°C unless otherwise noted.  
Symbol  
VI - VO  
PD  
Parameter  
Input-Output Voltage Differential  
Value  
40  
Unit  
V
Power Dissipation  
Internally limited  
0 ~ +125  
W
TJ  
Operating Junction Temperature Range  
Storage Temperature Range  
°C  
°C  
TSTG  
-65 ~ +125  
Electrical Characteristics  
VI - VO = 5 V, IO = 40 mA, 0°C TJ +125°C, PD(MAX) = 625 mW, unless otherwise specified.  
Symbol  
Parameter  
Line Regulation(1)  
Conditions  
Min. Typ. Max. Unit  
TA = +25°C, 3 V VI VO 40 V  
3 V VI VO 40 V  
0.01  
0.02  
0.04  
0.07  
%/V  
%/V  
RLINE  
TA = +25°C, 10 mA IO 100 mA,  
VO 5 V  
5
25  
mV  
TA = +25°C, 10 mA IO 100 mA,  
VO 5 V  
Load Regulation(1)  
0.1  
0.5  
%/VO  
RLOAD  
10 mA IO 100 mA, VO 5 V  
10 mA IO 100 mA, VO 5 V  
20  
0.3  
50  
70  
1.5  
100  
mV  
%/VO  
μA  
IADJ  
Adjustment Pin Current  
3 V VI - VO 40 V,  
10 mA IO 100 mA,  
PD < PDMAX  
Adjustment Pin Current  
Change  
ΔIADJ  
0.2  
5
μA  
3 V < VI - VO < 40 V,  
10 mA IO 100 mA,  
PD PDMAX  
VREF  
Reference Voltage  
1.20  
1.25  
1.30  
V
STT  
Temperature Stability  
0.7  
3.5  
200  
50  
%
Minimum Load Current to  
Maintain Regulation  
IL(MIN)  
VI - VO = 40 V  
10  
mA  
mA  
mA  
VI - VO 15V, PD < PDMAX  
100  
25  
IO(MAX)  
Maximum Output Current  
RMS Noise, %/VOUT  
VI - VO 40 V,  
PD < PDMAX, TA = +25°C  
TA = +25°C,  
10 Hz < f < 10 kHz  
eN  
0.003  
65  
%/VO  
dB  
VO = 10 V, f = 120 Hz,  
without CADJ  
RR  
ST  
Ripple Rejection  
VO = 10 V, f = 120 Hz,  
CADJ = 10 μF  
TJ = +125°C, 1000 Hours  
66  
80  
dB  
%
Long-Term Stability  
0.3  
Note:  
1. Load and Line regulation are specified at constant junction temperature. Change in VO due to heating effects must be taken  
into account separately. Pulse testing with low duty cycle is used.  
© 2002 Fairchild Semiconductor Corporation  
KA317L Rev. 1.1.0  
www.fairchildsemi.com  
2
Typical Application  
D1  
1N4002  
VO  
Input  
KA317L  
Output  
+
120  
1.0 F  
μ
VADJ  
1K  
720  
KSP2222  
TTL CONTROL  
MINIMUM VO = 1.25V  
Figure 2. 5V Electronic Shutdown Regulator  
D1 protects the device during an input short circuit.  
VO  
KA317L  
Output  
1N4001  
Input  
240  
50K  
VADJ  
KSP2907  
+
R2  
1.0 F  
μ
Figure 3. Slow Turn-On Regulator  
IO  
R1  
R2  
VO  
Input  
KA317L  
Output  
VADJ  
IADJ  
Figure 4. Current Regulator  
V
REF  
R1  
1.25V  
R1  
I
=
+ I  
@ ---------------  
----------------  
OMAX  
=
ADJ  
V
REF  
1.25V  
I
+ I  
@ ----------------------  
----------------------  
OMAX  
ADJ  
R1 + R2  
R1 + R2  
5mA < I < 500mA  
O
© 2002 Fairchild Semiconductor Corporation  
KA317L Rev. 1.1.0  
www.fairchildsemi.com  
3
Physical Dimensions  
TO-92 Ammo Type  
D
Figure 6. 3-Lead, TO-92, Molded, 0.200 in Line Spacing Lead Form  
Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner  
without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or  
obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the  
warranty therein, which covers Fairchild products.  
Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:  
http://www.fairchildsemi.com/packaging/.  
For current tape and reel specifications, visit Fairchild Semiconductor’s online packaging area:  
http://www.fairchildsemi.com/products/discrete/pdf/to92_tr.pdf.  
© 2002 Fairchild Semiconductor Corporation  
KA317L Rev. 1.1.0  
www.fairchildsemi.com  
4
TRADEMARKS  
The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not  
intended to be an exhaustive list of all such trademarks.  
PowerTrench®  
PowerXS™  
Programmable Active Droop¥  
QFET®  
The Power Franchise®  
2Cool¥  
F-PFS¥  
FRFET®  
AccuPower¥  
AX-CAP¥*  
Global Power ResourceSM  
GreenBridge¥  
Green FPS¥  
Green FPS¥ e-Series¥  
Gmax¥  
BitSiC¥  
TinyBoost¥  
TinyBuck¥  
QS¥  
Build it Now¥  
CorePLUS¥  
CorePOWER¥  
CROSSVOLT¥  
CTL¥  
Quiet Series¥  
RapidConfigure¥  
¥
TinyCalc¥  
TinyLogic®  
GTO¥  
IntelliMAX¥  
TINYOPTO¥  
TinyPower¥  
TinyPWM¥  
TinyWire¥  
Saving our world, 1mW/W/kW at a time™  
SignalWise¥  
SmartMax¥  
ISOPLANAR¥  
Making Small Speakers Sound Louder  
and Better™  
Current Transfer Logic¥  
DEUXPEED®  
Dual Cool™  
EcoSPARK®  
EfficientMax¥  
SMART START¥  
Solutions for Your Success¥  
SPM®  
TranSiC¥  
MegaBuck¥  
TriFault Detect¥  
TRUECURRENT®*  
PSerDes¥  
MICROCOUPLER¥  
MicroFET¥  
ESBC¥  
STEALTH¥  
®
SuperFET®  
MicroPak¥  
MicroPak2¥  
Fairchild®  
SuperSOT¥-3  
MillerDrive¥  
UHC®  
Ultra FRFET¥  
UniFET¥  
VCX¥  
VisualMax¥  
VoltagePlus¥  
XS™  
Fairchild Semiconductor®  
FACT Quiet Series¥  
FACT®  
SuperSOT¥-6  
SuperSOT¥-8  
SupreMOS®  
MotionMax¥  
mWSaver¥  
OptoHiT¥  
FAST®  
SyncFET¥  
Sync-Lock™  
OPTOLOGIC®  
OPTOPLANAR®  
FastvCore¥  
FETBench¥  
FPS¥  
®
*
®
* Trademarks of System General Corporation, used under license by Fairchild Semiconductor.  
DISCLAIMER  
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE  
RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT  
OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE  
SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN,  
WHICH COVERS THESE PRODUCTS.  
LIFE SUPPORT POLICY  
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE  
EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.  
As used herein:  
1. Life support devices or systems are devices or systems which, (a) are  
intended for surgical implant into the body or (b) support or sustain  
life, and (c) whose failure to perform when properly used in  
accordance with instructions for use provided in the labeling, can be  
reasonably expected to result in a significant injury of the user.  
2. A critical component in any component of a life support, device, or  
system whose failure to perform can be reasonably expected to  
cause the failure of the life support device or system, or to affect its  
safety or effectiveness.  
ANTI-COUNTERFEITING POLICY  
Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website, www.fairchildsemi.com,  
under Sales Support.  
Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their  
parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed  
applications, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the  
proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild  
Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors  
are genuine parts, have full traceability, meet Fairchild's quality standards for handling and storage and provide access to Fairchild's full range of up-to-date technical  
and product information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address any warranty issues that may arise.  
Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global  
problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors.  
PRODUCT STATUS DEFINITIONS  
Definition of Terms  
Datasheet Identification  
Product Status  
Definition  
Datasheet contains the design specifications for product development. Specifications may change  
in any manner without notice.  
Advance Information  
Formative / In Design  
Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild  
Semiconductor reserves the right to make changes at any time without notice to improve design.  
Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make  
changes at any time without notice to improve the design.  
Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor.  
The datasheet is for reference information only.  
Preliminary  
No Identification Needed  
Obsolete  
First Production  
Full Production  
Not In Production  
Rev. I63  
© Fairchild Semiconductor Corporation  
www.fairchildsemi.com  

相关型号:

KA317M

3-Terminal 0.5A Positive Adjustable Regulator
FAIRCHILD

KA317MI

Adjustable Positive Standard Regulator, 1.2V Min, 37V Max, BIPolar, PSIP3, IPAK-3
FAIRCHILD

KA317MR

3-Terminal 0.5A Positive Adjustable Regulator
FAIRCHILD

KA317MRTF

1.2 V-37V ADJUSTABLE POSITIVE REGULATOR, PSSO2, TO-252, DPAK-3
ROCHESTER

KA317MRTM

3-Terminal 0.5A Positive Adjustable Regulator
FAIRCHILD

KA317MRTM

1.2 V-37V ADJUSTABLE POSITIVE REGULATOR, PSSO2, TO-252, DPAK-3
ROCHESTER

KA317MTU

Adjustable Positive Standard Regulator, 1.2V Min, 37V Max, BIPolar, PSFM3, TO-220, 3 PIN
FAIRCHILD

KA317T

暂无描述
FAIRCHILD

KA317TU

3-Terminal Positive Adjustable Regulator
FAIRCHILD

KA317TU_NL

Adjustable Positive Standard Regulator, 1.2V Min, 37V Max, PSFM3, LEAD FREE, TO-220, 3 PIN
FAIRCHILD

KA317_09

3-Terminal Positive Adjustable Regulator
FAIRCHILD

KA319

Dual Comparator
FAIRCHILD