FHP3350IM14X [FAIRCHILD]
Triple and Quad Voltage Feedback Amplifiers; 三人间和四电压反馈放大器器![FHP3350IM14X](http://pdffile.icpdf.com/pdf1/p00106/img/icpdf/FHP3350_576321_icpdf.jpg)
型号: | FHP3350IM14X |
厂家: | ![]() |
描述: | Triple and Quad Voltage Feedback Amplifiers |
文件: | 总19页 (文件大小:750K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
![](http://public.icpdf.com/style/img/ads.jpg)
June 2006
FHP3350, FHP3450
tm
Triple and Quad Voltage Feedback Amplifiers
Features at ±5V
Description
■ 0.1dB gain flatness to 30MHz
The FHP3350 and FHP3450 are low cost, high performance,
voltage feedback amplifiers designed for video applications.
These triple and quad amplifiers consume only 3.6mA of supply
current per channel and are capable of driving dual (75Ω) video
loads while providing 0.1dB of gain flatness to 30MHz.
Consumer video applications will also benefit from their low
0.07% differential gain and 0.03˚ differential phase errors. The
FHP3350 offers three outputs that can be put into a high
impedance disable state to allow for video multiplexing or
minimize power consumption.
■ 0.07%/0.03˚ differential gain/phase error
■ 210MHz full power -3dB bandwidth at G = 2
■ 1,100V/µs slew rate
■ ±55mA output current (drives dual video load)
■ ±83mA output short circuit current
■ Output swings to within 1.3V of either rail
■ 3.6mA supply current per amplifier
■ Minimum stable gain of 3dB or 1.5V/V
■ FHP3350 - improved replacement for RC6333
■ FHP3450 - improved replacement for RC6334
■ Fully specified at +5V, and ±5V supplies
These amplifiers are designed to operate from 5V (±2.5V) to
12V (±6V) supplies. The outputs swing to within 1.3V of either
supply rail to accommodate video signals on a single 5V supply.
The FHP3350 and FHP3450 are designed on a complementary
bipolar process. They provide 210MHz of full power bandwidth
and 1,100V/µs of slew rate at a supply voltage of ±5V. The
combination of high performance, low power, and excellent
video performance make these amplifiers well suited for use in
many digital consumer video appliances as well as many
general purpose high speed applications.
Applications
■ Video driver
■ RGB driver
■ ADC buffer
■ S-video amp
■ Active Filters
Typical Application – Driving Dual Video Loads
+V
s
75Ω
Cable
75Ω
+IN
Cable
75Ω
75Ω
OUT
OUT
75Ω
75Ω
R
f
75Ω
Cable
R
g
75Ω
-V
s
Ordering Information
Operating Temp
Range
Packaging
Method
Part Number
Package
Lead Free
Yes
FHP3350IMTC14X
FHP3350IM14X
TSSOP-14
SOIC-14
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
Reel
Reel
Reel
Reel
Yes
FHP3450IMTC14X
FHP3450IM14X
TSSOP-14
SOIC-14
Yes
Yes
Moisture sensitivity level for all parts is MSL-1.
FHP3350, FHP3450 Rev. 1A
1
www.fairchildsemi.com
FHP3350 Pin Configurations
FHP3350 Pin Assignments
Pin#
Pin
Description
1
2
3
14
13
12
NC or DISABLE1
NC or DISABLE2
NC or DISABLE3
OUT2
-IN2
1
NC or DISABLE1
Channel 1 ENABLED if pin is left open or
pulled above V , DISABLED if pin is
ON
grounded or pulled below V
OFF
+IN2
2
3
NC or DISABLE2
NC or DISABLE3
Channel 2 ENABLED if pin is left open or
pulled above V , DISABLED if pin is
FHP3350
TSSOP-14
ON
4
11
+Vs
+IN1
-IN1
-Vs
grounded or pulled below V
OFF
Channel 3 ENABLED if pin is left open or
pulled above V , DISABLED if pin is
5
6
7
10
9
+IN3
-IN3
OUT3
ON
grounded or pulled below V
OFF
4
5
+Vs
+IN1
-IN1
Positive supply
8
OUT1
Positive Input, channel 1
Negative Input, channel 1
Output, channel 1
6
7
OUT1
OUT3
-IN3
8
Output, channel 3
9
Negative Input, channel 3
Positive Input, channel 3
Negative supply
10
11
12
13
14
+IN3
-Vs
+IN2
-IN2
Positive Input, channel 2
Negative Input, channel 2
Output, channel 2
OUT2
FHP3450 Pin Configurations
FHP3450 Pin Assignments
Pin#
1
Pin
OUT1
-IN1
Description
14
13
12
11
1
2
3
4
OUT1
-IN1
OUT4
-IN4
+IN4
-Vs
Output, channel 1
2
Negative Input, channel 1
Positive Input, channel 1
Positive supply
3
+IN1
+Vs
+IN1
+Vs
FHP3450
TSSOP
4
5
+IN2
-IN2
Positive Input, channel 2
Negative Input, channel 2
Output, channel 2
6
10
9
5
6
7
+IN2
-IN2
+IN3
-IN3
7
OUT2
OUT3
-IN3
8
Output, channel 3
8
OUT2
OUT3
9
Negative Input, channel 3
Positive Input, channel 3
Negative supply
10
11
12
13
14
+IN3
-Vs
+IN4
-IN4
Positive Input, channel 4
Negative Input, channel 4
Output, channel 4
OUT4
www.fairchildsemi.com
2
FHP3350, FHP3450 Rev. 1A
Absolute Maximum Ratings
The “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. The device should
not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the
absolute maximum ratings. The “Recommended Operating Conditions” table defines the conditions for actual device operation.
Parameter
Min.
Max.
Unit
Supply Voltage
0
12.6
V
V
Input Voltage Range
-V - 0.5V
+V +0.5V
s
s
Reliability Information
Parameter
Min.
Typ.
Max.
Unit
Junction Temperature
150
150
300
˚C
˚C
Storage Temperature Range
Lead Temperature (Soldering, 10s)
-65
˚C
1
14-Lead TSSOP
160
148
˚C/W
˚C/W
1
14-Lead SOIC
Note:
1. Package thermal resistance (θ ), JDEC standard, multi-layer test boards, still air. Assumed power is concentrated in one channel θ will be lower,
JA
JA
if power is distributed in all channels.
ESD Protection
ESD Protection
FHP3350
FHP3450
Package
SOIC
TSSOP
1500V
1500V
SOIC
2000V
2000V
TSSOP
2000V
1500V
Human Body Model (HBM)
Charged Device Model (CDM)
1500V
2000V
Recommended Operating Conditions
Parameter
Operating Temperature Range
Supply Voltage Range
Min.
-40
3
Typ.
Max.
+85
12
Unit
˚C
V
FHP3350, FHP3450 Rev. 1A
3
www.fairchildsemi.com
Electrical Characteristics at +5V
T = 25˚C, V = 5V, R = 249Ω, R = 150Ω to V /2, G = 2; unless otherwise noted.
c
s
f
L
s
Symbol
Parameter
Conditions
Min
Typ
Max
Units
Frequency Domain Response
-3dB Bandwidth
BW
BW
BW
No Peaking, G = +2, V
No Peaking, G = +2, V
= 0.2V
pp
190
190
35
MHz
MHz
MHz
ss
OUT
Full Power Bandwidth
= 2V
pp
Ls
OUT
0.1dB Gain Flatness - Large Signal G = +2, V
= 2V
pp
0.1dB
OUT
Time Domain Response
t , t
Rise and Fall Time
Settling Time to 0.1%
Overshoot
V
V
V
= 0.2V step
= 2V step
2.0
20
ns
ns
R
F
OUT
OUT
OUT
t
S
OS
SR
= 0.2V step
2.5
800
%
Slew Rate
2V step. G = -1
V/µs
Distortion / Noise Response
2nd Harmonic Distortion
3rd Harmonic Distortion
Total Harmonic Distortion
Differential Gain
HD2
HD3
THD
DG
V
V
V
= 2V , 5MHz
-70
-80
-69
0.08
0.02
8.5
1
dBc
dBc
dB
OUT
OUT
OUT
pp
= 2V , 5MHz
pp
= 2V , 5MHz
pp
NTSC (3.58MHz); AC coupled
NTSC (3.58MHz); AC coupled
> 100kHz
%
DP
Differenital Phase
˚
e
Input Voltage Noise
Input Current Noise
Crosstalk
nV/Hz
pA/Hz
dB
n
i
> 100kHz
n
X
at 5MHz
-70
TALK
IO
DC Performance
V
Input Offset Voltage
Average Drift
1
mV
µV/˚C
nA
dV
10
IO
I
Input Bias Current
Average Drift
±50
0.33
±50
75
bn
dI
nA/˚C
nA
bn
I
Input Offset Current
Power Supply Rejection Ratio
Open Loop Gain
IO
PSRR
DC
DC
dB
A
55
dB
OL
I
I
Supply Current per Amplifier
Disable Supply Current per Amp
Disable Characteristics
Off Isolation
3.0
35
mA
µA
S
Disable Mode
5MHz
SD
OFF
-60
3
dB
pF
dB
ns
ns
ISO
OFFC
Off Output Capacitance
Channel-to-Channel Isolation
Turn on time
OUT
ISO
CH
5MHz
-85
300
80
T
ON
T
Turn off time
OFF
DISABLE pins; disabled if pin is
V
Power Down Input Voltage
Enable Input Voltage
+V - 3.1
V
V
OFF
s
grounded or pulled below V
OFF
DISABLE pins; enabled if pin is left
V
+V - 1.9
ON
s
open or pulled above V
ON
www.fairchildsemi.com
4
FHP3350, FHP3450 Rev. 1A
Electrical Characteristics at +5V (Continued)
T = 25˚C, V = 5V, R = 249Ω, R = 150Ω to V /2, G = 2; unless otherwise noted.
c
s
f
L
s
Symbol
Parameter
Conditions
Min
Typ
Max
Units
Input Characteristics
Input Resistance
R
C
70
1
MΩ
pF
V
IN
IN
Input Capacitance
CMIR
Input Common Mode Voltage Range
1.2 to
3.8
CMRR
Common Mode Rejection Ratio
DC, V
= 1.5V to 3.5V
90
dB
CM
Output Characteristics
R = 2kΩ to V /2
1 to 4
V
V
L
s
V
Output Voltage Swing
O
R = 150Ω to V /2
1.1 to
3.9
L
s
I
I
Linear Output Current
V
V
= +V /2
±50
±75
mA
mA
OUT
SC
O
s
Short Circuit Output Current
= shorted to +V or GND
O
s
FHP3350, FHP3450 Rev. 1A
5
www.fairchildsemi.com
Electrical Characteristics at ±5V
T = 25˚C, V = ±5V, R = 249Ω, R = 150Ω to GND, G = 2; unless otherwise noted.
c
s
f
L
Symbol
Parameter
Conditions
Min
Typ
Max
Units
Frequency Domain Response
-3dB Bandwidth
BW
BW
BW
BW
No Peaking, G = +2, V
No Peaking, G = +2, V
= 0.2V
pp
210
210
30
MHz
MHz
MHz
MHz
ss
OUT
Full Power Bandwidth
= 2V
pp
Ls
OUT
0.1dB Gain Flatness - Large Signal G = +2, V
0.1dB Gain Flatness - Small Signal G = +2, V
Time Domain Response
= 2V
pp
0.1dB
0.1dBss
OUT
OUT
= 0.2V
50
pp
t , t
Rise and Fall Time
Settling Time to 0.1%
Overshoot
V
V
V
= 0.2V step
= 2V step
2
20
ns
ns
R
F
OUT
OUT
OUT
t
S
OS
SR
= 0.2V step
1
%
Slew Rate
2V step. G = -1
1100
V/µs
Distortion / Noise Response
2nd Harmonic Distortion
3rd Harmonic Distortion
Total Harmonic Distortion
Differential Gain
HD2
HD3
THD
DG
V
V
V
= 2V , 5MHz
-70
-74
-68
0.07
0.03
9
dBc
dBc
dB
OUT
OUT
OUT
pp
= 2V , 5MHz
pp
= 2V , 5MHz
pp
NTSC (3.58MHz); AC coupled
NTSC (3.58MHz); AC coupled
> 100kHz
%
DP
Differenital Phase
Input Voltage Noise
Input Current Noise
Crosstalk
˚
e
nV/Hz
pA/Hz
dB
n
i
> 100kHz
1
n
X
at 5MHz
-71
TALK
IO
DC Performance
1
V
Input Offset Voltage
-7
1
15
7
mV
µV/˚C
nA
dV
Average Drift
IO
1
I
Input Bias Current
-500
±100
0.3
±50
75
500
500
bn
dI
Average Drift
nA/˚C
nA
bn
1
I
Input Offset Current
-500
58
IO
1
PSRR
Power Supply Rejection Ratio
DC
DC
dB
1
A
Open Loop Gain
52
58
dB
OL
1
I
I
Supply Current per Amplifier
3.6
45
5
mA
µA
S
1
Disable Supply Current per Amp
Disable Characteristics
Off Isolation
Disable Mode
5MHz
100
SD
OFF
-65
3
dB
pF
dB
ns
ns
ISO
OFFC
Off Output Capacitance
Channel-to-Channel Isolation
Turn on time
OUT
ISO
CH
5MHz
-85
300
80
T
ON
T
Turn off time
OFF
DISABLE pins; disabled if pin is
V
Power Down Input Voltage
Enable Input Voltage
+V - 3.1
V
V
OFF
s
grounded or pulled below V
OFF
DISABLE pins; enabled if pin is left
V
+V - 1.9
ON
s
open or pulled above V
ON
Notes:
1. 100% tested at 25˚C
www.fairchildsemi.com
6
FHP3350, FHP3450 Rev. 1A
Electrical Characteristics at ±5V (Continued)
T = 25˚C, V = ±5V, R = 249Ω, R = 150Ω to GND, G = 2; unless otherwise noted.
c
s
f
L
Symbol
Parameter
Conditions
Min
Typ
Max
Units
Input Characteristics
Input Resistance
R
C
70
MΩ
pF
V
IN
IN
Input Capacitance
0.6
CMIR
Input Common Mode Voltage Range
-3.8 to
3.8
1
CMRR
Common Mode Rejection Ratio
DC, V
= -3.5V to 3.5V
58
98
dB
CM
Output Characteristics
R = 2kΩ
±4
V
V
L
V
Output Voltage Swing
O
1
R = 150Ω
±3.2
±3.7
±55
±83
L
I
I
Linear Output Current
V = 0V
mA
mA
OUT
SC
o
Short Circuit Output Current
V
shorted to GND
O
Notes:
1. 100% tested at 25˚C
FHP3350, FHP3450 Rev. 1A
7
www.fairchildsemi.com
Typical Performance Characteristics
T = 25˚C, V = 5V, R = 249Ω, R = 150Ω to V /2, G = 2; unless otherwise noted.
c
s
f
L
s
Figure 1. Non-Inverting Freq. Response (±5V)
Figure 2. Inverting Freq. Response (±5V)
4
1
2
0
G = -1
G = 1.5
0
-1
G = 10
G = -10
-2
-2
G = 5
G = -5
-4
-3
G = 2
G = -2
-6
-8
-4
-5
-6
-10
V
o
= 0.2V
V = 0.2V
o
pp
pp
-12
-7
0.1
1
10
100
1000
0.1
1
10
100
1000
Frequency (MHz)
Frequency (MHz)
Figure 3. Non-Inverting Freq. Response (+5V)
Figure 4. Inverting Freq. Response (+5V)
3
1
G = 1.5
0
0
G = -1
-3
-1
G = 10
G = -10
-6
-2
G = 5
G = -5
-9
-3
G = 2
G = -2
-12
-15
-18
-4
-5
-6
V
o
= 0.2V
V = 0.2V
o
pp
pp
-21
-7
0.1
1
10
100
1000
0.1
1
10
100
1000
Frequency (MHz)
Frequency (MHz)
Figure 5. Frequency Response vs. C (+5V)
Figure 6. Frequency Response vs. R (+5V)
L
L
3
1
0
CL = 100pF
V
o
= 0.2V
pp
RS = 20Ω
0
-3
CL = 500pF
CL = 50pF
-1
RS = 10Ω
RS = 30Ω
RL = 50
CL = 1000pF
-2
-6
RS = 7Ω
RL = 150
-3
CL = 2000pF
RL = 1k
-9
RS = 5Ω
-4
-5
-6
-7
-12
-15
-18
-21
+
-
Rs
CL RL
1kΩ
1kΩ
V
o
= 0.2V
pp
-8
0.1
1
10
100
1000
0.1
1
10
100
1000
Frequency (MHz)
Frequency (MHz)
www.fairchildsemi.com
8
FHP3350, FHP3450 Rev. 1A
Typical Performance Characteristics
T = 25˚C, V = 5V, R = 249Ω, R = 150Ω to V /2, G = 2; unless otherwise noted.
c
s
f
L
s
Figure 7. Large Signal Freq. Response (±5V)
Figure 8. Gain Flatness vs. Frequency
1
0
1.0
0.75
0.50
-1
VS = 5V
= 0.2V
VS
= 5V
= 0.2V
pp
V
o
pp
V
-2
0.25
0
o
VO = 1Vpp
0.1dB
-3
VO = 4Vpp
-0.1dB
-4
-0.25
-0.50
-0.75
-1.0
VS
= 5V
V
= 2V
o
pp
-5
VO = 2Vpp
-6
-7
0.1
1
10
100
1000
0.1
1
10
100
1000
Frequency (MHz)
Frequency (MHz)
Figure 9. HD2 vs. Frequency (±5V)
Figure 10. HD3 vs. Frequency (±5V)
-45
-45
VO = 2Vpp
VO = 2Vpp
-50
-50
-55
-60
-65
-70
-55
-60
-65
-70
-75
-75
RL = 150
RL = 150
-80
-80
-85
-85
RL = 1k
RL = 1k
-90
-90
-95
-95
0.1
1
10
0.1
1
10
Frequency (MHz)
Frequency (MHz)
Figure 11. HD2 vs. V (±5V)
Figure 12. HD3 vs. V (±5V)
o
o
-45
-50
-45
-50
30MHz
30MHz
-55
-55
-60
-60
10MHz
-65
-65
10MHz
-70
-70
5MHz
5MHz
-75
-75
-80
-80
1MHz
-85
-90
-95
-85
1MHz
-90
-95
0.5 0.7 0.9 1.1 1.3 1.5 1.7 1.9 2.1 2.3 2.5
0.5 0.7 0.9 1.1 1.3 1.5 1.7 1.9 2.1 2.3 2.5
Output Amplitude (Vpp
)
Output Amplitude (Vpp)
FHP3350, FHP3450 Rev. 1A
9
www.fairchildsemi.com
Typical Performance Characteristics
T = 25˚C, V = 5V, R = 249Ω, R = 150Ω to V /2, G = 2; unless otherwise noted.
c
s
f
L
s
Figure 13. CMRR vs. Frequency
Figure 14. PSRR vs. Frequency
90
90
80
+5V
5V
80
+5V, 5V
70
60
50
40
30
20
70
60
50
40
30
10k
100k
1
10
100
10k
100k
1
10
100
Frequency (MHz)
Frequency (MHz)
Figure 15. Open Loop Gain & Phase vs. Freq.
Figure 16. Input Voltage Noise (+5V)
80
70
60
50
40
30
20
10
0
0
100
90
80
70
60
50
40
30
20
10
0
-20
Phase
-40
-60
-80
-100
-120
-140
-160
-180
-200
Gain
-10
-20
V
s
= +5V + 5V
10k
100k
1
10
100
1000
0.0001 0.001
0.01
0.1
1
10
100
Frequency (MHz)
Frequency (MHz)
Figure 17. Crosstalk vs. Frequency (+5V)
Figure 18. Small Signal Pulse Response (+5V)
-35
-40
-45
-50
-55
-60
0.25
0.20
0.15
0.10
0.05
0
+5V
-65
-70
5V
-75
-80
-85
-0.05
0.1
1
10
100
0
1
2
3
4
5
6
7
8
9
10
Frequency (MHz)
Time (ns)
www.fairchildsemi.com
10
FHP3350, FHP3450 Rev. 1A
Typical Performance Characteristics
T = 25˚C, V = 5V, R = 249Ω, R = 150Ω to V /2, G = 2; unless otherwise noted.
c
s
f
L
s
Figure 19. Large Signal Pulse Response (+5V)
Figure 20. Small Signal Pulse Response (±5V)
2.5
2.0
1.5
1.0
0.5
0
0.25
0.20
0.15
0.10
0.05
0
-0.5
-0.05
0
1
2
3
4
5
6
7
8
9
10
0
1
2
3
4
5
6
7
8
9
10
Time (ns)
Time (ns)
Figure 21. Large Signal Pulse Response (±5V)
Figure 22. Large Signal Pulse Response (±5V)
2.25
4.5
2.0
1.75
1.50
1.25
1.0
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0
0.75
0.50
0.25
0
-0.25
-0.5
0
1
2
3
4
5
6
7
8
9
10
0
1
2
3
4
5
6
7
8
9
10
Time (ns)
Time (ns)
Figure 23. Differential Gain and Phase (±2.5V)
Figure 24. Differential Gain and Phase (±2.5V)
0.04
0.03
0.02
0.01
0
0.04
0.08
0.06
0.04
0.02
0
0.08
0.06
0.04
0.02
0
0.03
0.02
0.01
0
Gain
Phase
Gain
Phase
-0.01
-0.02
-0.01
-0.02
-0.02
-0.04
-0.02
-0.04
-0.03
-0.04
-0.03
-0.04
-0.06
-0.08
-0.06
-0.08
NTSC - AC Coupled into 220µF
NTSC - DC Coupled
-0.35 -0.25 -0.15 -0.05 0.05 0.15 0.25 0.35
-0.35 -0.25 -0.15 -0.05 0.05 0.15 0.25 0.35
Input Voltage (V)
Input Voltage (V)
FHP3350, FHP3450 Rev. 1A
11
www.fairchildsemi.com
Typical Performance Characteristics
T = 25˚C, V = 5V, R = 249Ω, R = 150Ω to V /2, G = 2; unless otherwise noted.
c
s
f
L
s
Figure 25. Differential Gain and Phase (±5V)
Figure 26. Differential Gain and Phase (±5V)
0.06
0.04
0.02
0
0.06
0.06
0.04
0.02
0
0.06
0.04
0.02
0
Gain
0.04
0.02
0
Gain
Phase
Phase
-0.02
-0.04
-0.02
-0.04
-0.02
-0.04
-0.02
-0.04
-0.06
-0.08
-0.06
-0.08
-0.06
-0.08
-0.06
-0.08
NTSC - AC Coupled
NTSC - DC Coupled
-0.7
-0.5
-0.3
-0.1
0.1
0.3
0.5
0.7
-0.7
-0.5
-0.3
-0.1
0.1
0.3
0.5
0.7
Input Voltage (V)
Input Voltage (V)
Figure 27. Enable/Disable Response (±2.5V)
Figure 28. Channel-to-Channel Isolation (+5V)
3
0.15
-40
-45
-50
-55
2
0.1
Measuring CH3 with 0.2V on Ch1
1
0.05
0
pp
-60
-65
-70
-75
-80
-85
-90
Output
0
-1
-0.05
-2
-3
-0.1
Disable
Measuring CH1 with 0.2V on Ch3
pp
-0.15
0
2
4
6
8
10 12 14 16 18 20
0.1
1
10
100
Time (µs)
Frequency (MHz)
Figure 29. Off Isolation (+5V)
Figure 30. Off Output Impedance (+5V)
-35
210
Any Channel
V = 5V & 5V
s
-40
190
170
150
130
110
90
(120dBΩ = 1MΩ)
-45
-50
-55
-60
-65
-70
-75
-80
-85
70
50
30
10
0.1
1
10
100
10k
100k
1
10
100
Frequency (MHz)
Frequency (MHz)
www.fairchildsemi.com
12
FHP3350, FHP3450 Rev. 1A
Where I is the supply current, V + is the positive supply pin
s
s
Applications Information
voltage, V - is the negative supply pin voltage, V
is the
s
o(RMS)
RMS output voltage and I
delivered to the load. Follow the maximum power derating
curves shown in Figure 32 below to ensure proper operation.
is the RMS output current
General Description
OUT(RMS)
The FHP3350 and FHP3450 are low cost, high performance,
voltage feedback amplifiers designed for video applications.
These triple and quad amplifiers consume only 3.6mA of supply
current per channel and are capable of driving dual (75Ω) video
loads while providing 0.1dB of gain flatness to 30MHz.
Consumer video applications will also benefit from their low
0.07% differential gain and 0.03˚ differential phase errors. The
FHP3350 offers three outputs that can be put into a high
impedance disable state to allow for video multiplexing or
minimize power consumption.
1.4
TSSOP-14
1.2
SOIC-14
1.0
0.8
0.6
0.4
0.2
0
These amplifiers are designed to operate from 5V (±2.5V) to
12V (±6V) supplies. The outputs swing to within 1.3V of either
supply rail to accommodate video signals on a single 5V supply.
The FHP3350 and FHP3450 are designed on a complementary
bipolar process. They provide 210MHz of full power bandwidth
and 1,100V/µs of slew rate at a supply voltage of ±5V. The
combination of high performance, low power, and excellent
video performance make these amplifiers well suited for use in
many digital consumer video appliances as well as many
general purpose high speed applications.
-40
-20
0
20
40
60
80
Ambient Temperature (°C)
Figure 32. Maximum Power Derating
Overdrive Recovery
Driving Capacitive Loads
The Frequency Response vs. C plot on page 8, illustrates the
response of the FHP3350 Family. A small series resistance
For an amplifier, an overdrive condition occurs when the output
and/or input ranges are exceeded. The recovery time varies
based on whether the input or output is overdriven and by how
much the ranges are exceeded. The FHP3350/3450 will
typically recover in less than 50ns from an overdrive condition.
Figure 33 shows the FHP3350 in an overdriven condition.
L
(R ) at the output of the amplifier, illustrated in Figure 1, will
s
improve stability and settling performance. R values in the
s
Frequency Response vs. C plot were chosen to achieve
L
maximum bandwidth with less than 1dB of peaking. For
maximum flatness, use a larger R .
s
2
Vs = 2.5V
Output
G = +5
1.5
R
1
s
Input
0.5
C
R
L
L
0
-0.5
-1
R
f
R
g
-1.5
-2
0
0.1 02 0.3 0.4 0.5 0.6 0.7 0.8 0.9
1
Time (µs)
Figure 31.Typical Topology for driving
capacitive loads
Figure 33. Overdrive Recovery
Power Dissipation
The maximum internal power dissipation allowed is directly
related to the maximum junction temperature. If the maximum
junction temperature exceeds 150˚C for an extended time,
device failure may occur. The FHP3350 and FHP3450 are short
circuit protected. However, this may not guarantee that the
maximum junction temperature (+150˚C) is not exceeded under
all conditions. RMS Power Dissipation can be calculated using
the following equation:
Power Dissipation = I * (V + - V -) + (V + - V
) * I
OUT(RMS)
s
s
s
s
o(RMS)
FHP3350, FHP3450 Rev. 1A
13
www.fairchildsemi.com
Layout Considerations
General layout and supply bypassing play major roles in high
frequency performance. Fairchild has evaluation boards to use
as a guide for high frequency layout and as aid in device testing
and characterization. Follow the steps below as a basis for high
frequency layout:
• Include 6.8µF and 0.01µF ceramic capacitors
• Place the 6.8µF capacitor within 0.75 inches of the power pin
• Place the 0.01µF capacitor within 0.1 inches of the power pin
• Remove the ground plane under and around the part,
especially near the input and output pins to reduce parasitic
capacitance
• Minimize all trace lengths to reduce series inductances
Refer to the evaluation board layouts shown below for more
information.
Evaluation Board Information
The following evaluation boards are available to aid in the
testing and layout of thes devices:
Evaluation
Board #
Products
KEB019
FHP3350IM14X
KEB020
KEB012
KEB018
FHP3350IMTC14X
FHP3450IMTC14X
FHP3450IM14X
Figure 35. FHP3350 KEB019 (top side)
Evalutaion Board Schematics
DISABLE 1
1
IN1
RIN1
RF1
ROUT1
ROUT2
ROUT3
OUT1
OUT2
OUT3
RG1
DISABLE 2
2
IN2
RIN2
RF2
RG2
DISABLE 3
3
IN3
RIN3
RF3
RG3
Figure 36. FHP3350 KEB019 (bottom side)
Figure 34. FHP3350 KEB019/KEB020 schematic
www.fairchildsemi.com
14
FHP3350, FHP3450 Rev. 1A
Figure 37. FHP3350 KEB020 (top side)
Figure 39. FHP3450 KEB012/KEB018 schematic
Figure 38. FHP3350 KEB020 (bottom side)
Figure 40. FHP3450 KEB012 (top side)
FHP3350, FHP3450 Rev. 1A
15
www.fairchildsemi.com
Figure 41. FHP3450 KEB012 (bottom side)
Figure 43. FHP3450 KEB018 (bottom side)
Figure 42. FHP3450 KEB018 (top side)
www.fairchildsemi.com
16
FHP3350, FHP3450 Rev. 1A
Mechanical Dimensions
14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Package
Number MTC14
7
6
– B –
e
N
5
(b)
2X E/2
TSSOP-14
MIN NOM
8
1.0 DIA
SYMBOL
MAX
1.10
0.15
0.95
0.75
–
E1 E
c
c1
A
A1
A2
L
–
–
0.05
0.85
0.50
0.09
0.09
0.19
0.19
0.09
0.09
0°
–
0.90
0.60
–
1.0
b1
1
2
3
ddd C B A
SECTION AA
2X
6
R
e /2
9
N/2 TIPS
1.0
R1
b
–
–
–
0.30
0.25
0.20
0.16
8°
b1
c
0.22
–
ccc
D
c1
01
L1
aaa
bbb
ccc
ddd
e
–
A2
A
8
3
7
– A –
–
aaa C
1.0 REF
0.10
0.10
0.05
0.20
0.65 BSC
12° REF
– C –
b
NX A1
(02)
(0.20)
M
bbb C B A
R1
02
– H –
03
D
12° REF
5.00
R
GAGE
4.90
4.30
5.10
4.50
PLANE
E1
E
4.40
6.4 BSC
0.65 BSC
14
10
(03)
A
A
0.25
01
L
e
N
(L1)
NOTES:
1
2
3
4
5
All dimensions are in millimeters (angle in degrees).
Dimensioning and tolerancing per ASME Y14.5–1994.
Dimensions "D" does not include mold flash, protusions or gate burrs. Mold flash protusions or gate burrs shall not exceed 0.15 per side .
Dimension "E1" does not include interlead flash or protusion. Interlead flash or protusion shall not exceed 0.25 per side.
Dimension "b" does not include dambar protusion. Allowable dambar protusion shall be 0.08mm total in excess of the "b" dimension at maximum
material condition. Dambar connot be located on the lower radius of the foot. Minimum space between protusion and adjacent lead is 0.07mm
for 0.5mm pitch packages.
6
7
8
9
Terminal numbers are shown for reference only.
Datums – A – and – B – to be determined at datum plane – H – .
Dimensions "D" and "E1" to be determined at datum plane – H – .
This dimensions applies only to variations with an even number of leads per side. For variation with an odd number of leads per side, the "center"
lead must be coincident with the package centerline, Datum A.
10 Cross sections A – A to be determined at 0.10 to 0.25mm from the leadtip.
FHP3350, FHP3450 Rev. 1A
17
www.fairchildsemi.com
14-Lead Small Outline Package (SOIC)
SOIC-14
MIN
.0040
.014
.0075
.337
.150
SYMBOL
MAX
.0098
.018
.0098
.344
A1
B
C
D
E
e
D
7°
e
ZD
C
L
.157
.050 BSC
H
h
L
.2284
.0099
.016
.060
0
.2440
.0196
.050
.068
8
C
E
H
L
A
ZD
A2
0.20 ref
.062
.054
Pin No. 1
B
DETAIL-A
L
NOTE:
1. All dimensions are in inches.
h x 45°
DETAIL-A
2. Lead coplanarity should be 0 to 0.10mm (.004") max.
3. Package surface finishing:
A1
A
A2
α
(2.1) Top: matte (charmilles #18~30).
(2.2) All sides: matte (charmilles #18~30).
(2.3) Bottom: smooth or matte (charmilles #18~30).
C
4. All dimensions excluding mold flashes and end flash
from the package body shall not exceed o.152mm (.006)
per side (d).
www.fairchildsemi.com
18
FHP3350, FHP3450 Rev. 1A
TRADEMARKS
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not
intended to be an exhaustive list of all such trademarks.
®
ACEx™
FAST
ISOPLANAR™
LittleFET™
MICROCOUPLER™
MicroFET™
MicroPak™
MICROWIRE™
MSX™
PowerEdge™
PowerSaver™
SuperFET™
SuperSOT™-3
SuperSOT™-6
SuperSOT™-8
SyncFET™
TCM™
ActiveArray™
Bottomless™
Build it Now™
CoolFET™
CROSSVOLT™
DOME™
FASTr™
FPS™
FRFET™
GlobalOptoisolator™
GTO™
®
PowerTrench
®
QFET
QS™
QT Optoelectronics™
Quiet Series™
RapidConfigure™
RapidConnect™
µSerDes™
ScalarPump™
SILENT SWITCHER
SMART START™
SPM™
®
HiSeC™
TinyLogic
2
EcoSPARK™
I C™
MSXPro™
OCX™
TINYOPTO™
TruTranslation™
UHC™
2
E CMOS™
i-Lo™
ImpliedDisconnect™
IntelliMAX™
EnSigna™
FACT™
FACT Quiet Series™
OCXPro™
OPTOLOGIC
®
UniFET™
®
®
OPTOPLANAR™
PACMAN™
POP™
UltraFET
Across the board. Around the world.™
VCX™
Wire™
®
The Power Franchise
Programmable Active Droop™
Power247™
Stealth™
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY
PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY
LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN;
NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE
SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS,
SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR
CORPORATION.
As used herein:
1. Life support devices or systems are devices or systems
which, (a) are intended for surgical implant into the body,
or (b) support or sustain life, or (c) whose failure to perform
when properly used in accordance with instructions for use
provided in the labeling, can be reasonably expected to
result in significant injury to the user.
2. A critical component is any component of a life support
device or system whose failure to perform can be
reasonably expected to cause the failure of the life support
device or system, or to affect its safety or effectiveness.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification
Product Status
Definition
Advance Information
Formative or In
Design
This datasheet contains the design specifications for
product development. Specifications may change in
any manner without notice.
Preliminary
First Production
This datasheet contains preliminary data, and
supplementary data will be published at a later date.
Fairchild Semiconductor reserves the right to make
changes at any time without notice in order to improve
design.
No Identification Needed
Obsolete
Full Production
This datasheet contains final specifications. Fairchild
Semiconductor reserves the right to make changes at
any time without notice in order to improve design.
Not In Production
This datasheet contains specifications on a product
that has been discontinued by Fairchild semiconductor.
The datasheet is printed for reference information only.
Rev. I19
www.fairchildsemi.com
19
©2006 Fairchild Semiconductor Corporation
相关型号:
©2020 ICPDF网 联系我们和版权申明