IRM-3656C [EVERLIGHT]

Logic Output Photo IC, ROHS COMPLIANT, PLASTIC PACKAGE-3;
IRM-3656C
型号: IRM-3656C
厂家: EVERLIGHT ELECTRONICS CO., LTD    EVERLIGHT ELECTRONICS CO., LTD
描述:

Logic Output Photo IC, ROHS COMPLIANT, PLASTIC PACKAGE-3

遥控
文件: 总10页 (文件大小:219K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
EVERLIGHT ELECTRONICS CO.,LTD.  
Technical Data Sheet  
Infrared Remote-control Receiver Module  
IRM-36xxA SERIES  
Features :  
• Photo detector and preamplifier in one package  
• Internal filter for PCM frequency  
• Improved shielding against electrical field disturbance  
• TTL and CMOS compatibility  
• Output active low  
• Low power consumption  
• Improved immunity against ambient light  
• Pb free  
• The product itself will remain within RoHS compliant version.  
Descriptions  
The IRM-36xxA SERIES are miniaturized receivers for infrared  
remote control systems. PIN diode and preamplifier are  
assembled on lead frame, the epoxy package is designed as IR  
filter. The demodulated output signal can directly be decoded  
by a microprocessor. IRM-36xxA SERIES is the standard IR  
remote control receiver series, supporting all major transmission  
codes.  
Applications  
1. Optical switch  
2. Light detecting portion of remote control  
AV instruments such as Audio, TV, VCR, CD, MD, etc.  
Home appliances such as Air-conditioner, Fan , etc.  
The other equipments with wireless remote control.  
CATV set top boxes  
Multi-media Equipment  
PART  
MATERIAL  
COLOR  
Chip  
Silicon  
Black  
Compound  
Epoxy  
Black  
Everlight Electronics Co., Ltd.  
http:\\www.everlight.com  
Rev 3  
Page: 1 of 10  
RichardHsu  
Device NoDMO-036-210  
Prepared date05-01-2006  
Prepared by:  
EVERLIGHT ELECTRONICS CO.,LTD.  
IRM-36xxA SERIES  
Package Dimensions  
OUT  
GND  
Vcc  
Notes: 1.All dimensions are in millimeters.  
2.Tolerances unless dimensions ±0.3mm.  
Available Types For Different Carrier Frequencies  
Type  
Carrier Frequencies(Typ)  
IRM-3633A  
IRM-3636A  
IRM-3638A  
IRM-3640A  
IRM-3656A  
32.7 kHz  
36.7 kHz  
37.9 kHz  
40.0 kHz  
56.7 kHz  
Everlight Electronics Co., Ltd.  
http:\\www.everlight.com  
Prepared date05-01-2006  
Rev 3  
Page: 2 of 10  
RichardHsu  
Device NoDMO-036-210  
Prepared by:  
EVERLIGHT ELECTRONICS CO.,LTD.  
IRM-36xxA SERIES  
Absolute Maximum Ratings (Ta=25)  
Parameter  
Supply Voltage  
Symbol  
Rating  
Unit  
Notice  
Vcc  
Topr  
Tstg  
0~6  
V
Operating Temperature  
Storage Temperature  
-25 ~ +80  
-40 ~ +85  
4mm from mold body  
less than 10 seconds  
Soldering Temperature  
Tsol  
260  
Recommended Operating Condition  
Supply Voltage Rating: Vcc 2.7V to 5.5V, Typ. = 3V  
Electro-Optical Characteristics (Ta=25, and Vcc=3 V)  
Parameter  
Symbol  
MIN.  
TYP.  
MAX.  
Unit  
Condition  
mA No signal input  
nm  
Consumption Current  
Peak Wavelength  
Icc  
---  
---  
1.1  
2.5  
---  
λp  
940  
L0  
12  
6
---  
---  
---  
---  
m
Reception Distance  
L45  
At the ray axis  
deg  
*1  
Θh  
Θv  
TH  
TL  
Half Angle(Horizontal)  
Half Angle(Vertical)  
---  
---  
45  
45  
---  
---  
---  
---  
deg  
μs  
High Level Pulse Width  
Low Level Pulse Width  
400  
400  
800  
800  
At the ray axis  
*2  
μs  
High Level Output Voltage  
Low Level Output Voltage  
VH  
VL  
2.5  
---  
---  
---  
V
V
0.2  
0.5  
*1:The ray receiving surface at a vertex and relation to the ray axis in the range of θ= 0° and θ=45°.  
*2:A range from 30cm to the arrival distance. Average value of 50 pulses.  
Everlight Electronics Co., Ltd.  
http:\\www.everlight.com  
Rev 3  
Page: 3 of 10  
RichardHsu  
Device NoDMO-036-210  
Prepared date05-01-2006  
Prepared by:  
EVERLIGHT ELECTRONICS CO.,LTD.  
IRM-36xxA SERIES  
Test Method:  
The specified electro-optical characteristics is satisfied under the following  
Conditions at the controllable distance.  
cMeasurement place  
A place that is nothing of extreme light reflected in the room.  
dExternal light  
Project the light of ordinary white fluorescent lamps which are not high  
Frequency lamps and must be less then 10 Lux at the module surface.  
(Ee10Lux)  
eStandard transmitter  
A transmitter whose output is so adjusted as to Vo=400mVp-p and the output  
Wave form shown in Fig.-1.According to the measurement method shown in  
Fig.-2 the standard transmitter is specified.  
However , the infrared photodiode to be used for the transmitter should be  
λp=940nm,Δλ=50nm. Also, photodiode is used of PD438B(Vr=5V).  
fMeasuring system  
According to the measuring system shown in Fig.-3  
Fig.-1 Transmitter Wave Form  
D.U.T output Pulse  
Carrier frequency is adjusted to  
center frequency of each product.  
OUTPUT PULSE  
OF DEVICE  
IR TANSMITTER  
OUTPUT WAVE FORM  
Duty=0.5  
Everlight Electronics Co., Ltd.  
http:\\www.everlight.com  
Rev 3  
Page: 4 of 10  
RichardHsu  
Device NoDMO-036-210  
Prepared date05-01-2006  
Prepared by:  
EVERLIGHT ELECTRONICS CO.,LTD.  
IRM-36xxA SERIES  
Fig.-2 Measuring Method  
Fig.-3  
Measuring System  
20cm  
10k  
+5.0± 0.1V  
L: Transmission Distance  
Vcc  
OUT  
10uF  
θ
θ
D.U.T  
Standard Transmitter  
Vout  
Standard Transmitter  
Vout  
GND  
θ: Angle Of Horizontal & Vertical Direction  
Oscilloscope  
Block Diagram  
VCC  
Voltage  
Reference  
Circuit  
Noise Det.&  
Gain Ctrl.  
Band-pass  
Filter  
I-V  
Converter  
&Input  
Bias  
OUT  
Integrator  
&Wave  
Shaping  
Pre  
Amp  
AGC  
Amp  
Limit  
Amp  
Output  
Stage  
Comparator  
IN  
Control  
Fset Bias Circuit  
Threshold  
Control  
Circuit  
Frequency  
Setting  
Frequency  
Trimming  
GND  
Application Circuit:  
Vcc  
RC Filter should be connected closely between Vcc pin and GND pin.  
Everlight Electronics Co., Ltd.  
http:\\www.everlight.com  
Rev 3  
Page: 5 of 10  
RichardHsu  
Device NoDMO-036-210  
Prepared date05-01-2006  
Prepared by:  
EVERLIGHT ELECTRONICS CO.,LTD.  
IRM-36xxA SERIES  
The Notice of Application:  
Transmission o remote control signal consist of four parts: Encode Part, IR Transmitter Source,  
IRM device, Decode Part  
1. When IRM-36xxA code select frequency, it need to well understand the center system of encode  
part.  
2. Strong or weak light of IR Transmitter can affect distance of transmission.  
3. When using IRM-36xxA device, it requires the composition of code pattern to reach the demand  
as follows:  
Minimum Burst Length tburst (number of pulses per burst) : 10 cycles  
Minimum data pause time:  
Remocon Tx code with Full frame Repeat  
Remocon TX code with Repeat key  
Remocon TX repeat Code with minimum  
burst length  
Tactual,data = Tdata  
(
T 150μs  
)
Bn  
n
Tactual,gap = Tgap  
(
T 150μs  
)
Tgap 2.0 ∗  
(
Tr +150μs  
)
Bn  
n
Tactual,gap 2.0 Tactual,data  
4. It needs to ensure the translation range of decode part if it is applied to the pulse-width range.  
If the above items hardly assure of its application, it’ll cause NG(no good) message from the edge  
of signal.  
Everlight Electronics Co., Ltd.  
http:\\www.everlight.com  
Rev 3  
Page: 6 of 10  
RichardHsu  
Device NoDMO-036-210  
Prepared date05-01-2006  
Prepared by:  
EVERLIGHT ELECTRONICS CO.,LTD.  
IRM-36xxA SERIES  
Typical Electro-Optical Characteristics Curves  
Fig.-4 Relative Spectral Sensitivity vs. Wavelength  
Fig.-5 Relative Transmission Distance vs. Direction  
θ
Fig.-6 Arrival Distance vs. Ambient Temperature  
Fig.-7 Arrival Distance vs. Supply Voltage  
Fig.-8 Relative Transmission Distance vs. Center Carrier Frequency  
IRM-3633A  
IRM-3638A  
IRM-3636A  
Center Carrier Frequency (kHz)  
Center Carrier Frequency (kHz)  
Center Carrier Frequency (kHz)  
Everlight Electronics Co., Ltd.  
http:\\www.everlight.com  
Rev 3  
Prepared by:  
Page: 7 of 10  
RichardHsu  
Device NoDMO-036-210  
Prepared date05-01-2006  
EVERLIGHT ELECTRONICS CO.,LTD.  
IRM-36xxA SERIES  
Typical Electro-Optical Characteristics Curves  
Fig.-8 Relative Transmission Distance vs. Center Carrier Frequency  
IRM-3640A  
IRM-3656A  
Center Carrier Frequency (kHz)  
Center Carrier Frequency (kHz)  
Fig.-9 Relative Transmission Distance vs. Center Carrier Frequency  
IRM-3638A  
IRM-3636A  
IRM-3633A  
Transmission Distance Lc (m)  
Transmission Distance Lc (m)  
Transmission Distance Lc (m)  
IRM-3640A  
IRM-3656A  
Transmission Distance Lc (m)  
Transmission Distance Lc (m)  
Everlight Electronics Co., Ltd.  
http:\\www.everlight.com  
Rev 3  
Prepared by:  
Page: 8 of 10  
Device NoDMO-036-210  
Prepared date05-01-2006  
RichardHsu  
EVERLIGHT ELECTRONICS CO.,LTD.  
IRM-36xxA SERIES  
Reliability Test Item And Condition  
The reliability of products shall be satisfied with items listed below.  
Confidence level: 90%  
LTPD: 10%  
Failure Judgement  
Criteria  
Samples(n)  
Defective(c)  
Test Items  
Test Conditions  
1 cycle -40+25+85℃  
(30min)(5min)(30min)  
300 cycle test  
Temperature cycle  
n=22,c=0  
n=22,c=0  
n=22,c=0  
n=22,c=0  
n=22,c=0  
Temp: +85℃  
High temperature test Vcc:5V  
1000hrs  
L0L×0.8  
L45L×0.8  
Low temperature  
storage  
Temp: -40℃  
1000hrs  
L: Lower specification  
limit  
High temperature  
High humidity  
Ta: 85,RH: 85%  
1000hrs  
Temp: 260±510sec  
4mm From the bottom of the package.  
Solder heat  
Everlight Electronics Co., Ltd.  
http:\\www.everlight.com  
Rev 3  
Page: 9 of 10  
Device NoDMO-036-210  
Prepared date05-01-2006  
Prepared by:  
RichardHsu  
EVERLIGHT ELECTRONICS CO.,LTD.  
IRM-36xxA SERIES  
Packing Quantity Specification  
1. 1500PCS/1Box  
2. 10Boxes/1Carton  
Label Form Specification  
CPN: Customer’s Production Number  
P/N : Production Number  
QTY: Packing Quantity  
CAT: Ranks  
RoHS  
IRM-3638A  
HUE: Peak Wavelength  
REF: Reference  
LOT No: Lot Number  
MADE IN TAIWAN: Production Place  
Notes  
1. Above specification may be changed without notice. EVERLIGHT will reserve authority on  
material change for above specification.  
2. When using this product, please observe the absolute maximum ratings and the instructions  
for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for  
any damage resulting from use of the product which does not comply with the absolute  
maximum ratings and the instructions included in these specification sheets.  
3. These specification sheets include materials protected under copyright of EVERLIGHT  
corporation. Please don’t reproduce or cause anyone to reproduce them without  
EVERLIGHT’s consent.  
EVERLIGHT ELECTRONICS CO., LTD.  
Office: No 25, Lane 76, Sec 3, Chung Yang Rd,  
Tucheng, Taipei 236, Taiwan, R.O.C  
Tel: 886-2-2267-2000, 2267-9936  
Fax: 886-2267-6244, 2267-6189, 2267-6306  
http:\\www.everlight.com  
Everlight Electronics Co., Ltd.  
http:\\www.everlight.com  
Prepared date05-01-2006  
Rev 3  
Page: 10 of 10  
RichardHsu  
Device NoDMO-036-210  
Prepared by:  

相关型号:

SI9130DB

5- and 3.3-V Step-Down Synchronous Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1-E3

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135_11

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9136_11

Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130CG-T1-E3

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130LG-T1-E3

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130_11

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137DB

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137LG

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9122E

500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification Drivers

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY