38-01-A74-YSC-A2T1U1DH-AM [EVERLIGHT]
3mm Power LED; 3毫米POWER LED
| 型号： | 38-01-A74-YSC-A2T1U1DH-AM |
| 厂家： | 
EVERLIGHT ELECTRONICS CO., LTD |
| 描述： | 3mm Power LED |
| 文件： | 总12页 (文件大小：391K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
EVERLIGHT ELECTRONICS CO., LTD.
Technical Data Sheet
3mm Power LED
38-01-A74-YSC-A2T1U1DH-AM
Feature
‧ RoHS compliant.
‧ Piranha package.
This is a preliminary
‧ Colorless clear resin.
‧ Low thermal resistance.
specification intended for
‧ Packaged in tubes for automatic insertion equipment.
‧ Total flux: 7150 to 14250 mlm at 70mA.
‧ Qualification according to AEC-Q101.
design purposes and subject
to change without prior
notice.
Applications
‧ Automotive Lighting
‧ Electronic signs and signals
‧ General lighting application
Device Selection Guide
Chip
Emitted Color
Yellow
Resin Color
Material
AlGaInP
Water Clear
1 of 12
Everlight Electronics Co., Ltd.
Device No.: DPE-0000136
http://www.everlight.com
Published date: 25-June.-2009
Rev.:
1
Page:
Created by: Vicky Feng
Revision : 1
LifecyclePhase:
Release Date:2009-07-10 21:51:49.0
Expired Period: Forever
EVERLIGHT ELECTRONICS CO., LTD.
Technical Data Sheet
3mm Power LED
38-01-A74-YSC-A2T1U1DH-AM
Absolute Maximum Ratings (Ta=25℃)
Parameter
Symbol
VR
Rating
5
Unit
V
Reverse Voltage
Forward Current
IF
70
mA
mA
mW
℃
Peak Forward Current
(Duty 1/10 @1KHz)
IFP
160
Power Dissipation
Junction Temperature
Operating Temperature
Storage Temperature
Thermal Resistance
Pd
220
Tj
115
Topr
-40 ~ +100
-40 ~ +110
150
℃
Tstg
Rth J-A
ESDHBM
ESDMM
Tsol
℃
K/W
V
2000
200
ESD
(Classification acc. AEC Q101)
V
Wave Soldering : 260 ℃ for 5 sec.
Hand Soldering : 350 ℃ for 3 sec.
Soldering Temperature
2 of 12
Everlight Electronics Co., Ltd.
Device No.: DPE-0000136
http://www.everlight.com
Rev.:
1
Page:
Published date: 25-June.-2009
Created by: Vicky Feng
Revision : 1
LifecyclePhase:
Release Date:2009-07-10 21:51:49.0
Expired Period: Forever
EVERLIGHT ELECTRONICS CO., LTD.
Technical Data Sheet
3mm Power LED
38-01-A74-YSC-A2T1U1DH-AM
Electro-Optical Characteristics (Ta=25℃)
Parameter
Total Flux
Symbol Min.
Typ.
---
Max.
14250
---
Unit Condition
Φv
2θ1/2
λp
7150
---
mlm IF =70mA
Viewing Angle
35
deg
nm
nm
nm
V
IF =70mA
IF =70mA
IF =70mA
IF =70mA
IF =70mA
VR =5V
Peak Wavelength
Dominant Wavelength
Spectrum Radiation Bandwidth
Forward Voltage
---
592
---
---
λd
586
---
594
---
Δλ
15
1.9
---
---
2.9
VF
IR
Reverse Current
---
10
μA
Note:
1. Tolerance of Total Flux: ±11%
2. Tolerance of Dominant Wavelength: ±1nm
3. Tolerance of Forward Voltage: ±0.1V
3 of 12
Everlight Electronics Co., Ltd.
Device No.: DPE-0000136
http://www.everlight.com
Rev.:
1
Page:
Published date: 25-June.-2009
Created by: Vicky Feng
Revision : 1
LifecyclePhase:
Release Date:2009-07-10 21:51:49.0
Expired Period: Forever
EVERLIGHT ELECTRONICS CO., LTD.
Technical Data Sheet
3mm Power LED
38-01-A74-YSC-A2T1U1DH-AM
Bin Range of Forward Voltage (Ta=25℃)
Bin Code
Min.
Max.
2.1
Unit
Condition
1
2
3
4
5
1.9
2.1
2.3
IF =70mA
V
2.3
2.5
2.5
2.7
2.7
2.9
Note:
Tolerance of Forward Voltage: ±0.1V
Bin Range of Dominant Wavelength (Ta=25℃)
Bin Code
Min.
586
Max.
590
Unit
Condition
1
2
nm
IF =70mA
590
594
Note:
Tolerance of Dominant Wavelength: ±1nm
Bin Range of Total Flux (Ta=25℃)
Bin Code
Min.
7150
9000
11250
Max.
9000
Unit
Condition
T1
T2
U1
mlm
IF =70mA
11250
14250
Note:
Tolerance of Total Flux: ±11%
4 of 12
Everlight Electronics Co., Ltd.
Device No.: DPE-0000136
http://www.everlight.com
Rev.:
1
Page:
Published date: 25-June.-2009
Created by: Vicky Feng
Revision : 1
LifecyclePhase:
Release Date:2009-07-10 21:51:49.0
Expired Period: Forever
EVERLIGHT ELECTRONICS CO., LTD.
Technical Data Sheet
3mm Power LED
38-01-A74-YSC-A2T1U1DH-AM
Typical Electro-Optical Characteristics Curves
Typical Curve of Spectral Distribution
100%
50%
0%
400
450
500
550
600
650
700
Wavelength (nm)
Note: V(λ)=Standard eye response curve; IF =20mA
Diagram Characteristics of Radiation
00
100
200
1.0
0.8
0.6
0.4
0.2
0.0
300
400
500
600
700
800
900
-900
-300
-700
-500
-100
View Angle (degree)
5 of 12
Everlight Electronics Co., Ltd.
Device No.: DPE-0000136
http://www.everlight.com
Rev.:
1
Page:
Published date: 25-June.-2009
Created by: Vicky Feng
Revision : 1
LifecyclePhase:
Release Date:2009-07-10 21:51:49.0
Expired Period: Forever
EVERLIGHT ELECTRONICS CO., LTD.
Technical Data Sheet
3mm Power LED
38-01-A74-YSC-A2T1U1DH-AM
Dominant Wavelength vs. Forward Current
(Ta=25℃)
Forward Current vs. Forward Voltage
(Ta=25℃)
100
90
80
70
60
50
40
30
20
10
0
597
596
595
594
593
592
591
590
0
10 20 30 40 50 60 70 80 90 100
Forward Current (mA)
1.7
1.9
2.1
2.3
2.5
2.7
Forward Voltage (V)
Relative Luminous Intensity vs.
Forward Current (Ta=25℃)
Max. Permissible Forward Current vs.
Ambient Temperature
1.5
1.2
0.9
0.6
0.3
0.0
100
80
60
40
20
0
0
20
40
60
80
100
120
0
10 20 30 40 50 60 70 80 90 100
Forward Current (mA)
Ambient Temperature (℃)
6 of 12
Everlight Electronics Co., Ltd.
Device No.: DPE-0000136
http://www.everlight.com
Rev.:
1
Page:
Published date: 25-June.-2009
Created by: Vicky Feng
Revision : 1
LifecyclePhase:
Release Date:2009-07-10 21:51:49.0
Expired Period: Forever
EVERLIGHT ELECTRONICS CO., LTD.
Technical Data Sheet
3mm Power LED
38-01-A74-YSC-A2T1U1DH-AM
Package Dimension
Notes: 1. An epoxy meniscus may extend about 1.5mm(0.059") down the leads
2. Tolerances unless dimensions ±0.25mm
3. All dimensions are in millimeters
7 of 12
Everlight Electronics Co., Ltd.
Device No.: DPE-0000136
http://www.everlight.com
Rev.:
1
Page:
Published date: 25-June.-2009
Created by: Vicky Feng
Revision : 1
LifecyclePhase:
Release Date:2009-07-10 21:51:49.0
Expired Period: Forever
EVERLIGHT ELECTRONICS CO., LTD.
Technical Data Sheet
3mm Power LED
38-01-A74-YSC-A2T1U1DH-AM
Antistic Packing Materials
Tube
PART NO:
LOT NO:
QTY:
CAT:
Label area
Tube Label Explanation
‧PART NO: Product Number
‧QTY: Packing Quantity
‧LOT No: Lot Number
‧CAT: Rank of (VF)(Note*)(ΦV)
Note: λd/CIE/Color temperature
Note: Tolerances unless mentioned ±2.0mm. Unit = mm
Standard Box
Tube Label Explanation
‧CPN: Customer’s Product Number
‧P/N: Product Number
‧QTY: Packing Quantity
‧CAT: Rank of (VF)(Note*)(ΦV)
‧Note: λd/CIE/Color temperature
‧HUE/REF: Reference
‧LOT No: Lot Number
Note: Tolerances unless mentioned ±3.0mm. Unit = mm
8 of 12
Everlight Electronics Co., Ltd.
Device No.: DPE-0000136
http://www.everlight.com
Rev.:
1
Page:
Published date: 25-June.-2009
Created by: Vicky Feng
Revision : 1
LifecyclePhase:
Release Date:2009-07-10 21:51:49.0
Expired Period: Forever
EVERLIGHT ELECTRONICS CO., LTD.
Technical Data Sheet
3mm Power LED
38-01-A74-YSC-A2T1U1DH-AM
Packing Quantity
Packing material
Tube
Length × Width × height (mm) Tube Quantity (Pcs) LED Quantity (Pcs)
485 x 9.5 x
510 x 100 x 45
510 x 150 x 90
1
60
Standard box
Large box
30
1800
6300
105
Note:
1. Normal packing specification is use standard box, unless already defined initially.
2. Vacuum packing with anti-static bag after packing in standard box.
3. Specifications are subject to change without prior notice.
9 of 12
Everlight Electronics Co., Ltd.
Device No.: DPE-0000136
http://www.everlight.com
Rev.:
1
Page:
Published date: 25-June.-2009
Created by: Vicky Feng
Revision : 1
LifecyclePhase:
Release Date:2009-07-10 21:51:49.0
Expired Period: Forever
EVERLIGHT ELECTRONICS CO., LTD.
Technical Data Sheet
3mm Power LED
38-01-A74-YSC-A2T1U1DH-AM
Notes
1. Lead Forming
During lead formation, the leads should be bent at a point at least 3mm from the base of
the epoxy bulb.
Lead forming should be done before soldering.
Avoid stressing the LED package during leads forming. The stress to the base may
damage the LED’s characteristics or it may break the LEDs.
Cut the LED leadframes at room temperature. Cutting the leadframes at high temperatures
may cause failure of the LEDs.
When mounting the LEDs onto a PCB, the PCB holes must be aligned exactly with the
lead position of the LED. If the LEDs are mounted with stress at the leads, it causes
deterioration of the epoxy resin and this will degrade the LEDs.
2. Storage
The LEDs should be stored at 30°C or less and 70%RH or less after being shipped from
Everlight and the storage life limits are 3 months. If the LEDs are stored for 3 months or
more, they can be stored for a year in a sealed container with a nitrogen atmosphere and
moisture absorbent material.
Please avoid rapid transitions in ambient temperature, especially, in high humidity
environments where condensation can occur.
3. Soldering
Careful attention should be paid during soldering. Solder the LED no lower than 1.6mm
from the base of stopper is recommended.
Avoiding applying any stress to the lead frame while the LEDs are at high temperature
particularly when soldering.
Recommended soldering conditions:
Hand Soldering
DIP Soldering
Temp. at tip of iron
Soldering time
Distance
300℃ Max. (30W Max.)
3 sec Max.
Preheat temp.
Bath temp.
100℃ Max. (60 sec Max.)
260 Max.
No lower than 1.6mm from Bath time.
the base of stopper
5 sec Max.
Distance
No lower than 1.6mm from
the base of stopper
10 of 12
Everlight Electronics Co., Ltd.
Device No.: DPE-0000136
http://www.everlight.com
Rev.:
1
Page:
Published date: 25-June.-2009
Created by: Vicky Feng
Revision : 1
LifecyclePhase:
Release Date:2009-07-10 21:51:49.0
Expired Period: Forever
EVERLIGHT ELECTRONICS CO., LTD.
Technical Data Sheet
3mm Power LED
38-01-A74-YSC-A2T1U1DH-AM
Dip and hand soldering should not be done more than one time.
After soldering the LEDs, the epoxy bulb should be protected from mechanical shock or
vibration until the LEDs return to room temperature.
A rapid-rate process is not recommended for cooling the LEDs down from the peak
temperature.
Although the recommended soldering conditions are specified in the above table, dip or
handsoldering at the lowest possible temperature is desirable for the LEDs.
Wave soldering parameter must be set and maintain according to recommended
temperature and dwell time in the solder wave.
4. Cleaning
When necessary, cleaning should occur only with isopropyl alcohol at room temperature
for a duration of no more than one minute. Dry at room temperature before use.
Do not clean the LEDs by the ultrasonic. When it is absolutely necessary, the influence of
ultrasonic cleaning on the LEDs depends on factors such as ultrasonic power and the
assembled condition. Ultrasonic cleaning shall be pre-qualified to ensure this will not
cause damage to the LED
5. Heat Management
Heat management of LEDs must be taken into consideration during the design stage of
LED application. The current should be de-rated appropriately by referring to the
de-rating curve found in each product specification.
The temperature surrounding the LED in the application should be controlled. Please refer
to the data sheet de-rating curve.
6. ESD (Electrostatic Discharge)
Electrostatic discharge (ESD) or surge current (EOS) can damage LEDs.
An ESD wrist strap, ESD shoe strap or antistatic gloves must be worn whenever handling
LEDs.
All devices, equipment and machinery must be properly grounded.
Use ion blower to neutralize the static charge which might have built up on surface of the
LEDs plastic lens as a result of friction between LEDs during storage and handing.
11 of 12
Everlight Electronics Co., Ltd.
Device No.: DPE-0000136
http://www.everlight.com
Rev.:
1
Page:
Published date: 25-June.-2009
Created by: Vicky Feng
Revision : 1
LifecyclePhase:
Release Date:2009-07-10 21:51:49.0
Expired Period: Forever
EVERLIGHT ELECTRONICS CO., LTD.
Technical Data Sheet
3mm Power LED
38-01-A74-YSC-A2T1U1DH-AM
7. Other
Above specification may be changed without notice. EVERLIGHT will reserve authority
on material change for above specification.
When using this product, please observe the absolute maximum ratings and the
instructions for using outlined in these specification sheets. EVERLIGHT assumes no
responsibility for any damage resulting from use of the product which does not comply
with the absolute maximum ratings and the instructions included in these specification
sheets.
These specification sheets include materials protected under copyright of EVERLIGHT
corporation. Please don’t reproduce or cause anyone to reproduce them without
EVERLIGHT’s consent.
12 of 12
Everlight Electronics Co., Ltd.
Device No.: DPE-0000136
http://www.everlight.com
Rev.:
1
Page:
Published date: 25-June.-2009
Created by: Vicky Feng
Revision : 1
LifecyclePhase:
Release Date:2009-07-10 21:51:49.0
Expired Period: Forever
相关型号：
©2020 ICPDF网 联系我们和版权申明