23-21UYC-S530-A3-TR8 [EVERLIGHT]
1206 Package Chip LED ( 1.1mm Height ); 1206封装贴片LED（ 1.1毫米高）
| 型号： | 23-21UYC-S530-A3-TR8 |
| 厂家： | 
EVERLIGHT ELECTRONICS CO., LTD |
| 描述： | 1206 Package Chip LED ( 1.1mm Height ) |
| 文件： | 总9页 (文件大小：223K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet
1206 Package Chip LED ( 1.1mm Height )
23-21UYC/S530-A3/TR8
Features
․Package in 8mm tape on 7〞diameter reel.
․Compatible with automatic placement equipment.
․Compatible with infrared and vapor phase reflow
solder process.
․Mono-color type.
․Pb-free.
․The product itself will remain within RoHS compliant version
Descriptions
․The 23-21 SMD LED is much smaller than
lead frame type components, thus enable
smaller board size, higher packing density,
reduced storage space and finally smaller
equipment to be obtained.
․Besides, lightweight makes them ideal for
miniature applications. etc.
Applications
․Backlighting in dashboard and switch.
․Telecommunication: indicator and backlighting in
telephone and fax.
․Flat backlight for LCD, switch and symbol.
․General use.
Device Selection Guide
Chip
Part No.
Emitted Color
Brilliant Yellow
Resin Color
Material
AlGaInP
Water Clear
23-21UYC/S530-A3/TR8
Everlight Electronics Co., Ltd.
Device No:SZDSE-231-
http://www.everlight.com
Prepared date:8-Apr-2009
Rev.1
Page: 1 of 9
Prepared by: Huang yongxin
EVERLIGHT ELECTRONICS CO.,LTD.
23-21UYC/S530-A3/TR8
Package Outline Dimensions
Notes: Tolerances Unless Dimension ±0.1mm ,Unit = mm
Everlight Electronics Co., Ltd.
Device No:SZDSE-231-
http://www.everlight.com
Prepared date:8-Apr-2009
Rev.1
Page: 2 of 9
Prepared by: Huangyongxin
EVERLIGHT ELECTRONICS CO.,LTD.
23-21UYC/S530-A3/TR8
Absolute Maximum Ratings (Ta=25℃)
Parameter
Reverse Voltage
Symbol
VR
Rating
Unit
5
25
V
mA
mA
mW
V
Forward Current
IF
Operating Temperature
Storage Temperature
Electrostatic Discharge (HBM)
Power Dissipation
IFP
60
Pd
60
ESD
Topr
2000
-40 ~ +85
℃
Peak Forward Current
(Duty 1/10 @1KHz)
Tstg
-40 ~ +90
℃
Reflow Soldering : 260 ℃ for 10 sec.
Hand Soldering : 350 ℃ for 3 sec.
Soldering Temperature
Tsol
Electro-Optical Characteristics (Ta=25℃)
Parameter
Symbol
Min.
Typ.
Max.
Unit
Condition
Luminous Intensity
Viewing Angle
Iv
2θ1/2
λp
38
59
-----
-----
-----
-----
mcd
deg
nm
-----
-----
-----
130
591
589
Peak Wavelength
IF=20 mA
Dominant Wavelength
λd
nm
nm
V
Spectrum Radiation
Bandwidth
△λ
-----
15
-----
Forward Voltage
VF
1.7
2.0
2.4
10
VR=5V
Reverse Current
IR
-----
-----
µA
Everlight Electronics Co., Ltd.
Device No:SZDSE-231-
http://www.everlight.com
Prepared date:8-Apr-2009
Rev.1
Page: 3 of 9
Prepared by: Huangyongxin
EVERLIGHT ELECTRONICS CO.,LTD.
23-21UYC/S530-A3/TR8
Typical Electro-Optical Characteristics Curves
Ta=25°C
Ta=25°C
Wavelength λ(nm)
Forward Voltage V (V)
F
Ta=25°C
)
Ambient Temperature T (°C
Forward Current I (mA)
a
Ta=25°C
Ambient Temperature T (°C )
a
Everlight Electronics Co., Ltd.
Device No:SZDSE-231-
http://www.everlight.com
Prepared date:8-Apr-2009
Rev.1
Page: 4 of 9
Prepared by: Huangyongxin
EVERLIGHT ELECTRONICS CO.,LTD.
23-21UYC/S530-A3/TR8
Label explanation
CAT: Luminous Intensity Rank
HUE: Dom. Wavelength Rank
REF: Forward Voltage Rank
Reel Dimensions
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
Everlight Electronics Co., Ltd.
Device No:SZDSE-231-
http://www.everlight.com
Prepared date:8-Apr-2009
Rev.1
Page: 5 of 9
Prepared by: Huangyongxin
EVERLIGHT ELECTRONICS CO.,LTD.
23-21UYC/S530-A3/TR8
Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel
N
ote: The tolerances unless mentioned is ±0.1mm ,Unit = mm
Moisture Resistant Packaging
Aluminum moisture-proof bag
Label
Desiccant
Label
Everlight Electronics Co., Ltd.
Device No:SZDSE-231-
http://www.everlight.com
Prepared date:8-Apr-2009
Rev.1
Page: 6 of 9
Prepared by: Huangyongxin
EVERLIGHT ELECTRONICS CO.,LTD.
23-21UYC/S530-A3/TR8
Reliability Test Items And Conditions
The reliability of products shall be satisfied with items listed below.
Confidence level：90%
LTPD：10%
Test
Hours/Cycles
Sample
Size
No.
1
Items
Test Condition
Ac/Re
0/1
Temp. : 260℃±5℃
Reflow Soldering
22 PCS.
6 Min.
Min. 5sec.
H : +100℃ 15min
300 Cycles
2
Temperature Cycle
Thermal Shock
22 PCS.
0/1
∫ 5 min
L : -40℃ 15min
H : +100℃ 5min
300 Cycles
3
4
22 PCS.
22 PCS.
0/1
0/1
∫ 10 sec
L : -10℃ 5min
High Temperature
Storage
Low Temperature
Storage
1000 Hrs.
1000 Hrs.
Temp. : 100℃
Temp. : -40℃
IF = 20 mA
5
6
22 PCS.
22 PCS.
0/1
0/1
DC Operating Life
1000 Hrs.
1000 Hrs.
High Temperature /
High Humidity
85℃/ 85%RH
7
22 PCS.
0/1
Everlight Electronics Co., Ltd.
Device No:SZDSE-231-
http://www.everlight.com
Prepared date:8-Apr-2009
Rev.1
Page: 7 of 9
Prepared by: Huangyongxin
EVERLIGHT ELECTRONICS CO.,LTD.
23-21UYC/S530-A3/TR8
Precautions For Use
1. Over-current-proof
Customer must apply resistors for protection , otherwise slight voltage shift will cause big
current change ( Burn out will happen ).
2. Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less.
2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less.
If unused LEDs remain, it should be stored in moisture proof packages.
2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
storage time, baking treatment should be performed using the following conditions.
Baking treatment : 60±5℃ for 24 hours.
3. Soldering Condition
3.1 Pb-free solder temperature profile
3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board.
Everlight Electronics Co., Ltd.
Device No:SZDSE-231-
http://www.everlight.com
Prepared date:8-Apr-2009
Rev.1
Page: 8 of 9
Prepared by: Huangyongxin
EVERLIGHT ELECTRONICS CO.,LTD.
23-21UYC/S530-A3/TR8
4.Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds
within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and
do soldering of each terminal. Be careful because the damage of the product is often started at the
time of the hand solder.
5.Repairing
Repair should not be done after the LEDs have been soldered. When repairing is
unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed
beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.
EVERLIGHT ELECTRONICS CO., LTD.
Office: No 25, Lane 76, Sec 3, Chung Yang Rd,
Tucheng, Taipei 236, Taiwan, R.O.C
Tel: 886-2-2267-2000, 2267-9936
Fax: 886-2267-6244, 2267-6189, 2267-6306
http://www.everlight.com
Everlight Electronics Co., Ltd.
Device No:SZDSE-231-
http://www.everlight.com
Prepared date:8-Apr-2009
Rev.1
Page: 9 of 9
Prepared by: Huangyongxin
相关型号：
23-21UYC/S530-A3/TR8
Single Color LED, Brilliant Yellow, Water Clear, 1.6mm, ROHS COMPLIANT, SMD, 2 PIN
EVERLIGHT
23-21UYC/S530-A4/TR8
Single Color LED, Brilliant Yellow, Water Clear, 1.6mm, ROHS COMPLIANT, SMD, 2 PIN
EVERLIGHT
23-21UYC/S530-A5/TR8
Single Color LED, Brilliant Yellow, Water Clear, 1.6mm, ROHS COMPLIANT, SMD, 2 PIN
EVERLIGHT
23-21UYC/S530-A6/TR8
Single Color LED, Brilliant Yellow, Water Clear, 1.6mm, ROHS COMPLIANT, SMD, 2 PIN
EVERLIGHT
23-22B/R7G6C-A30/2T
Dual Color LED, Dark Red/brilliant Yellow Green, Water Clear, 1.4mm, ROHS COMPLIANT, SMD, 4 PIN
EVERLIGHT
23-22BUSRSYGC/S530-A5/E3/TR8
Dual Color LED, Dark Red/brilliant Green, Water Clear, 1.4mm, ROHS COMPLIANT, SMD, 4 PIN
EVERLIGHT
©2020 ICPDF网 联系我们和版权申明